Skip to contentSkip to conversation

ahci: add PCI ID for Marvell 88SE91A0 SATA Controller

PATCH Applied Andreas Schrägle 2 participants 2 messages May 24, 2014 – May 27, 2014 libata

lore
Share & tools
lore

Andreas Schrägle

author
#0 lore raw

PATCH 1/1 ahci: add PCI ID for Marvell 88SE91A0 SATA Controller

From: Andreas Schrägle <[email protected]>

Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID.

---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/ata/ahci.c +2 -0
index 6070781..ae672a3 100644
@@ -445,6 +445,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192),
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9172 on some Gigabyte */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0),
+	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3),
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
Signature · 1 line
1.9.3
Applied
#1 lore raw
Quoted 3 lines · Andreas Schrägle

From: Andreas Schrägle <[email protected]>

Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID.

Applied to libata/for-3.16.

Thanks.

Signature · 1 line
tejun