mwifiex: block work queue while suspended

The work queue may execute after the device is suspended, leading to SDIO register I/O over a suspend and resume of the system. With a WARN_ON in mwifiex_write_data_to_card we see:

[ 2115.351137] PM: suspend of devices complete after 15.989 msecs
[ 2115.366047] mwifiex_sdio mmc0:0001:1: mwifiex_write_data_sync: not allowed while suspended
[ 2115.366067] mwifiex_sdio mmc0:0001:1: host_to_card, write iomem (1) failed: -1
[ 2115.386023] PM: late suspend of devices complete after 34.845 msecs
[ 2115.386303] PM: noirq suspend of devices complete after 0.272 msecs
[ 2115.386388] before suspend
[ 2115.387824] after resume
[ 2115.388618] PM: noirq resume of devices complete after 0.745 msecs
[ 2115.407641] PM: early resume of devices complete after 18.849 msecs
[ 2125.397532] mmc0: Timeout waiting for hardware interrupt.
[ 2125.397559] mwifiex_sdio mmc0:0001:1: write CFG reg failed
[ 2125.397575] ------------[ cut here ]------------
[ 2125.397575] WARNING: at drivers/net/wireless/mwifiex/sdio.c:485 mwifiex_write_data_to_card+0x98/0xc4 [mwifiex_sdio]()
[ 2125.397746] [<bf0eb34c>] (mwifiex_host_to_card_mp_aggr+0x354/0x46c [mwifiex_sdio])
[ 2125.397746] [<bf0eb5f4>] (mwifiex_sdio_host_to_card+0x190/0x234 [mwifiex_sdio])
[ 2125.397788] [<bf0bed00>] (mwifiex_process_tx+0x90/0x1a0 [mwifiex])
[ 2125.397823] [<bf0bf8a0>] (mwifiex_send_single_packet+0x134/0x2b0 [mwifiex])
[ 2125.397857] [<bf0c074c>] (mwifiex_wmm_process_tx+0x76c/0x800 [mwifiex])
[ 2125.397887] [<bf0ba3f8>] (mwifiex_main_process+0x344/0x504 [mwifiex])
[ 2125.397913] [<bf0ba5e0>] (mwifiex_main_work_queue+0x28/0x2c [mwifiex])
[ 2125.397949] [<c00409fc>] (process_one_work+0x260/0x488)
[ 2125.397949] [<c0040e40>] (worker_thread+0x1e0/0x32c)
[ 2125.397979] [<c00464d0>] (kthread+0x9c/0xac)
[ 2125.397979] ---[ end trace 86d7b628a6c8ddd0 ]---

---

Test environment is an OLPC XO-4 doing one sleep every few seconds, with the device configured to wake the system, with constant ping by another host. Kernel is 3.5 with many backported mwifiex patches.

We also see that an SDIO interrupt from the device may occur after all devices are suspended, leading to a similar symptom:

[ 1292.887221] PM: suspend of devices complete after 21.990 msecs
[ 1292.922632] PM: late suspend of devices complete after 35.403 msecs
[ 1292.922901] PM: noirq suspend of devices complete after 0.001 msecs
               <-- here an mmc register read begins in sdio_irq_thread
[ 1292.923020] before suspend
[ 1292.953311] after resume
[ 1292.954106] PM: noirq resume of devices complete after 0.099 msecs
[ 1292.973124] PM: early resume of devices complete after 18.814 msecs
[ 1302.923009] mmc0: Timeout waiting for hardware interrupt.
[ 1302.923050] ------------[ cut here ]------------
[ 1302.923075] WARNING: at drivers/net/wireless/mwifiex/sdio.c:688 mwifiex_sdio_interrupt+0xcc/0x21c [mwifiex_sdio]()
[ 1302.923204] [<bf0c089c>] (mwifiex_sdio_interrupt+0xcc/0x21c [mwifiex_sdio])
[ 1302.923218] [<c0302be4>] (sdio_irq_thread+0x178/0x2f0)
[ 1302.923218] [<c00464d0>] (kthread+0x9c/0xac)
[ 1302.923235] ---[ end trace 7e9f40af36cc200c ]---
[ 1302.923240] mwifiex_sdio mmc0:0001:1: read mp_regs failed, will retry ...
[ 1302.923291] mwifiex_sdio mmc0:0001:1: read mp_regs worked on retry
[ 1303.554228] PM: resume of devices complete after 10581.100 msecs
               ^-- note how resume was delayed by mmc0 timeout
[ 1303.745395] Restarting tasks ... done.
[ 1312.943035] mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1400141716.779991) = 0xe5, act = 0x1

I don't know how to fix this one yet; I don't know why the SDHCI transaction fails, given the clocks remain running.

 drivers/net/wireless/mwifiex/main.c | 2 ++
 1 file changed, 2 insertions(+)

index 9c771b3..512ccd6 100644
@@ -833,6 +833,8 @@ static void mwifiex_main_work_queue(struct work_struct *work)
 
 	if (adapter->surprise_removed)
 		return;
+	if (adapter->is_suspended)
+		return;
 	mwifiex_main_process(adapter);
 }
 

1.9.1


-- 
James Cameron
http://quozl.linux.org.au/

Hi James,

To understand what is happening here could you apply attached debug patch to generate logs, or enable dynamic_debug for that?

I guess the driver and firmware are out of sync here. If firmware is sleeping we will get this failure.

Are you able to get an SDIO Bus Analyzer capture?

index 8dee6c8..ee5185d 100644
@@ -199,7 +199,7 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv,
 		skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len);
 
 	do_gettimeofday(&tstamp);
-	dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
+	dev_err(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d,"
 		" seqno %#x\n",
 		tstamp.tv_sec, tstamp.tv_usec, cmd_code,
 		le16_to_cpu(*(__le16 *) ((u8 *) host_cmd + S_DS_GEN)), cmd_size,

@@ -457,6 +457,9 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 		rx_info->bss_type = priv->bss_type;
 	}
 
+	do_gettimeofday(&tstamp);
+	dev_err(adapter->dev, "event: %lu.%lu: cause: %#x\n",
+		tstamp.tv_sec, tstamp.tv_usec, eventcause);
 	if (eventcause != EVENT_PS_SLEEP && eventcause != EVENT_PS_AWAKE) {
 		do_gettimeofday(&tstamp);
 		dev_dbg(adapter->dev, "event: %lu.%lu: cause: %#x\n",

@@ -633,7 +636,7 @@ void mwifiex_recycle_cmd_node(struct mwifiex_adapter *adapter,
 	mwifiex_insert_cmd_to_free_q(adapter, cmd_node);
 
 	atomic_dec(&adapter->cmd_pending);
-	dev_dbg(adapter->dev, "cmd: FREE_CMD: cmd=%#x, cmd_pending=%d\n",
+	dev_err(adapter->dev, "cmd: FREE_CMD: cmd=%#x, cmd_pending=%d\n",
 		le16_to_cpu(host_cmd->command),
 		atomic_read(&adapter->cmd_pending));
 }

@@ -680,7 +683,7 @@ mwifiex_insert_cmd_to_pending_q(struct mwifiex_adapter *adapter,
 	spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags);
 
 	atomic_inc(&adapter->cmd_pending);
-	dev_dbg(adapter->dev, "cmd: QUEUE_CMD: cmd=%#x, cmd_pending=%d\n",
+	dev_err(adapter->dev, "cmd: QUEUE_CMD: cmd=%#x, cmd_pending=%d\n",
 		command, atomic_read(&adapter->cmd_pending));
 }
 

@@ -831,7 +834,7 @@ int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter)
 								orig_cmdresp_no;
 
 	do_gettimeofday(&tstamp);
-	dev_dbg(adapter->dev, "cmd: CMD_RESP: (%lu.%lu): 0x%x, result %d,"
+	dev_err(adapter->dev, "cmd: CMD_RESP: (%lu.%lu): 0x%x, result %d,"
 		" len %d, seqno 0x%x\n",
 	       tstamp.tv_sec, tstamp.tv_usec, orig_cmdresp_no, cmdresp_result,
 	       le16_to_cpu(resp->size), le16_to_cpu(resp->seq_num));

@@ -1135,15 +1138,15 @@ mwifiex_hs_activated_event(struct mwifiex_private *priv, u8 activated)
 			priv->adapter->hs_activated = true;
 			mwifiex_update_rxreor_flags(priv->adapter,
 						    RXREOR_FORCE_NO_DROP);
-			dev_dbg(priv->adapter->dev, "event: hs_activated\n");
+			dev_err(priv->adapter->dev, "event: hs_activated\n");
 			priv->adapter->hs_activate_wait_q_woken = true;
 			wake_up_interruptible(
 				&priv->adapter->hs_activate_wait_q);
 		} else {
-			dev_dbg(priv->adapter->dev, "event: HS not configured\n");
+			dev_err(priv->adapter->dev, "event: HS not configured\n");
 		}
 	} else {
-		dev_dbg(priv->adapter->dev, "event: hs_deactivated\n");
+		dev_err(priv->adapter->dev, "event: hs_deactivated\n");
 		priv->adapter->hs_activated = false;
 	}
 }

index 4ce3d7b..d7d8a96 100644
@@ -1033,12 +1033,12 @@ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter,
 
 	switch (upld_typ) {
 	case MWIFIEX_TYPE_DATA:
-		dev_dbg(adapter->dev, "info: --- Rx: Data packet ---\n");
+		dev_err(adapter->dev, "info: --- Rx: Data packet ---\n");
 		mwifiex_handle_rx_packet(adapter, skb);
 		break;
 
 	case MWIFIEX_TYPE_CMD:
-		dev_dbg(adapter->dev, "info: --- Rx: Cmd Response ---\n");
+		dev_err(adapter->dev, "info: --- Rx: Cmd Response ---\n");
 		/* take care of curr_cmd = NULL case */
 		if (!adapter->curr_cmd) {
 			cmd_buf = adapter->upld_buf;

@@ -1060,7 +1060,7 @@ static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter,
 		break;
 
 	case MWIFIEX_TYPE_EVENT:
-		dev_dbg(adapter->dev, "info: --- Rx: Event ---\n");
+		dev_err(adapter->dev, "info: --- Rx: Event ---\n");
 		adapter->event_cause = le32_to_cpu(*(__le32 *) skb->data);
 
 		if ((skb->len > 0) && (skb->len  < MAX_EVENT_SIZE))

Thanks, will add that to plan for next work on the ticket.

I'm a little alarmed at this possibility. What you say implies an interrupt from the device arrives after the firmware is in host sleep mode, yet the device is not available to take the read mp_regs transaction. Have I understood correctly?

We never see this "mmc0: Timeout ..." _except_ when the host has gone through suspend and resume, so it seemed more likely to be caused by SDHCI.

No, sorry, I don't have such equipment.

Okay. How will the work queue not be executed?

James Cameron
http://quozl.linux.org.au/

Hi James,

No, that depends on that wakeup (device to host) is through GPIO or SDIO interface.
In case of SDIO wakeup, does the MMC call driver's interrupt routing first or resume handler first? If MMC calls driver's ISR first, we will see an interrupt arrives after firmware is in host sleep mode.

I overlooked this SDHCI error. So it could be the reason why read mp_regs failed.

Actually I can take this change before we figure out what the real problem is. For other users without this problem this code shouldn't get executed during suspended. Please resend it as a [PATCH].

Thanks,
Bing

Here's a dynamic_debug log.

Note the point of failure is the "mmc0: Timeout waiting for hardware interrupt." message, which occurs in the driver SDIO interrupt function, which began execution in a critical time period after driver suspend but before platform suspend.

We use a GPIO to wake from WLAN.

May 26 07:44:33 xo-96-6d-f4 kernel: [  188.090061] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.113049] Suspending console(s) (use no_console_suspend to debug)
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.119533] usb 1-1: usb auto-resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133318] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133332] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0080
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133339] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133347] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0080
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133353] mwifiex_sdio mmc0:0001:1: data: port=7 mp_rd_bitmap=0x0080 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133366] mwifiex_sdio mmc0:0001:1: info: RX: port=7 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133375] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133381] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133381] mwifiex_sdio mmc0:0001:1: info: RX: port: 7, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133474] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133529] mwifiex_sdio mmc0:0001:1: data: 4294956098 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133548] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133567] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133572] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133581] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133589] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc3cf840
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133598] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133604] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x3f81
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133611] mwifiex_sdio mmc0:0001:1: data: port=7 mp_wr_bitmap=0x3f81 -> 0x3f01
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133611] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.133624] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 7
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.150049] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4  ACK POWER sig=se0 LPM PE CONNECT
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155165] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155165] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0100
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155172] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155178] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0100
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155184] mwifiex_sdio mmc0:0001:1: data: port=8 mp_rd_bitmap=0x0100 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155191] mwifiex_sdio mmc0:0001:1: info: RX: port=8 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155197] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155210] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155216] mwifiex_sdio mmc0:0001:1: info: RX: port: 8, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155309] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155349] mwifiex_sdio mmc0:0001:1: data: 4294956100 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155361] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155383] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155383] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155388] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155395] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc612540
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155405] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155418] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x3f01
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155418] mwifiex_sdio mmc0:0001:1: data: port=8 mp_wr_bitmap=0x3f01 -> 0x3e01
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155431] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.155431] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 8
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.170038] usb 1-1: finish resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.170530] hub 1-1:1.0: hub_resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.171655] pxau2o-ehci d4208000.usb: reused qh cc319280 schedule
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.171677] usb 1-1: link qh256-0001/cc319280 start 23 [1/0 us]
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.171687] hub 1-1:1.0: hub_suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.171719] usb 1-1: unlink qh256-0001/cc319280 start 23 [1/0 us]
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.171719] usb 1-1: usb suspend, wakeup 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176965] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176965] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0200
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176979] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176979] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0200
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176985] mwifiex_sdio mmc0:0001:1: data: port=9 mp_rd_bitmap=0x0200 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176992] mwifiex_sdio mmc0:0001:1: info: RX: port=9 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.176998] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177006] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177013] mwifiex_sdio mmc0:0001:1: info: RX: port: 9, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177105] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177148] mwifiex_sdio mmc0:0001:1: data: 4294956102 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177160] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177182] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177182] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177187] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177195] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc3cf840
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177204] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177211] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x3e01
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177217] mwifiex_sdio mmc0:0001:1: data: port=9 mp_wr_bitmap=0x3e01 -> 0x3c01
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177225] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.177237] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 9
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.190362] hub 1-0:1.0: hub_suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.190394] usb usb1: bus suspend, wakeup 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.190408] pxau2o-ehci d4208000.usb: suspend root hub
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.190865] dcon_source_switch to DCON
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198743] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198757] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0400
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198771] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198771] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0400
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198777] mwifiex_sdio mmc0:0001:1: data: port=10 mp_rd_bitmap=0x0400 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198784] mwifiex_sdio mmc0:0001:1: info: RX: port=10 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198790] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198803] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198815] mwifiex_sdio mmc0:0001:1: info: RX: port: 10, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198903] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198952] mwifiex_sdio mmc0:0001:1: data: 4294956104 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198965] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198987] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.198987] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199000] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199008] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc612540
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199017] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199017] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x3c01
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199023] mwifiex_sdio mmc0:0001:1: data: port=10 mp_wr_bitmap=0x3c01 -> 0x3801
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199031] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.199037] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 10
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.219356] olpc-dcon: missed loading, retrying
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220537] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220550] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0800
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220557] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220564] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0800
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220570] mwifiex_sdio mmc0:0001:1: data: port=11 mp_rd_bitmap=0x0800 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220577] mwifiex_sdio mmc0:0001:1: info: RX: port=11 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220590] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220596] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220602] mwifiex_sdio mmc0:0001:1: info: RX: port: 11, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220700] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220731] mwifiex_sdio mmc0:0001:1: data: 4294956107 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220742] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220749] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220760] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220766] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220781] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc3cf840
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220782] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220790] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x3801
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220796] mwifiex_sdio mmc0:0001:1: data: port=11 mp_wr_bitmap=0x3801 -> 0x3001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220803] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.220816] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 11
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242288] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242301] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x1000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242307] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242320] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x1000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242327] mwifiex_sdio mmc0:0001:1: data: port=12 mp_rd_bitmap=0x1000 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242333] mwifiex_sdio mmc0:0001:1: info: RX: port=12 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242343] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242343] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242356] mwifiex_sdio mmc0:0001:1: info: RX: port: 12, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242443] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242481] mwifiex_sdio mmc0:0001:1: data: 4294956109 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242492] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242499] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242509] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242515] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242522] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc612540
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242531] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242538] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x3001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242544] mwifiex_sdio mmc0:0001:1: data: port=12 mp_wr_bitmap=0x3001 -> 0x2001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242551] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.242557] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 12
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264063] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264070] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x2000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264070] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264082] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x2000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264090] mwifiex_sdio mmc0:0001:1: data: port=13 mp_rd_bitmap=0x2000 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264096] mwifiex_sdio mmc0:0001:1: info: RX: port=13 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264096] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264104] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264110] mwifiex_sdio mmc0:0001:1: info: RX: port: 13, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264214] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264241] mwifiex_sdio mmc0:0001:1: data: 4294956111 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264257] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264259] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264270] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264275] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264282] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc3cf840
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264298] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264298] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0x2001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264304] mwifiex_sdio mmc0:0001:1: data: port=13 mp_wr_bitmap=0x2001 -> 0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264311] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264317] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 13
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264595] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x2
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264606] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264613] mwifiex_sdio mmc0:0001:1: int: DNLD: wr_bitmap=0xffff
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264624] mwifiex_sdio mmc0:0001:1: info:  <--- Tx DONE Interrupt --->
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.264624] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285883] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285895] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x4000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285901] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285908] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x4000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285914] mwifiex_sdio mmc0:0001:1: data: port=14 mp_rd_bitmap=0x4000 -> 0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285927] mwifiex_sdio mmc0:0001:1: info: RX: port=14 rx_len=1508
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285927] mwifiex_sdio mmc0:0001:1: info: rx_len = 1536 skb->len = 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285944] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: last packet
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.285950] mwifiex_sdio mmc0:0001:1: info: RX: port: 14, rx_len: 1536
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286037] mwifiex_sdio mmc0:0001:1: info: --- Rx: Data packet ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286075] mwifiex_sdio mmc0:0001:1: data: 4294956113 BSS(0-0): Data <= kernel
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286087] mwifiex: data: packet type ETH_P_IP: 0008, tid=0x0 prio=0x0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286094] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286105] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286110] mwifiex_sdio mmc0:0001:1: data: tid=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286124] mwifiex_sdio mmc0:0001:1: data: dequeuing the packet cc7f0400 cc612540
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286126] mwifiex_sdio mmc0:0001:1: data: WMM: Pkt Delay: 0 ms, 0 ms sent to FW
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286139] mwifiex_sdio mmc0:0001:1: data: mp_wr_bitmap=0xffff
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286139] mwifiex_sdio mmc0:0001:1: data: port=14 mp_wr_bitmap=0xffff -> 0xbfff
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286152] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.286152] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 14
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.302676] olpc-dcon: The DCON has control
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.302876] mmp3_usb_phy_deinit_internal: Deinit usb phy!!!
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.302982] mmc2: dropping power over suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.303013] mmc1: dropping power over suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304049] mwifiex_sdio: cmd: mmc0:0001:1: suspend: PM flag = 0x3
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304049] mwifiex_sdio mmc0:0001:1: cmd: HS_CFG_CMD: condition:0xa gpio:0xff gap:0xff
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304072] mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe5, cmd_pending=1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304083] mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1401090251.944017): 0xe5, act 0x1, len 16, seqno 0x5f
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304094] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304109] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304257] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304275] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304275] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304282] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304294] mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304294] mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304300] mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304308] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304315] mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304350] mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304361] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304367] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304375] mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1401090251.944317): 0x80e5, result 0, len 16, seqno 0x5f
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304385] mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: HS_CFG cmd reply result=0x0, conditions=0xa gpio=0xff gap=0xff
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304401] mwifiex_sdio mmc0:0001:1: cmd completed: status=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304413] mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xe5, cmd_pending=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304473] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304473] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304479] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304486] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304491] mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304497] mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=10
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304503] mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304510] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304516] mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304552] mwifiex_sdio mmc0:0001:1: info: --- Rx: Event ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304563] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304569] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304577] mwifiex_sdio mmc0:0001:1: event: 1401090251.944519: cause: 0x47
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304586] mwifiex_sdio mmc0:0001:1: event: HS_ACT_REQ
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304592] mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe5, cmd_pending=1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304607] mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1401090251.944545): 0xe5, act 0x2, len 16, seqno 0x60
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304616] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304623] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304764] mwifiex_sdio mmc0:0001:1: int: sdio_ireg = 0x1
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304775] mwifiex_sdio mmc0:0001:1: int: UPLD: rd_bitmap=0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304781] mwifiex_sdio mmc0:0001:1: info: cmd_sent=0 data_sent=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304788] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0001
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304793] mwifiex_sdio mmc0:0001:1: data: port=0 mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304805] mwifiex_sdio mmc0:0001:1: info: RX: port=0 rx_len=20
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304805] mwifiex_sdio mmc0:0001:1: info: rx_len = 256 skb->len = 256
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304812] mwifiex_sdio mmc0:0001:1: info: mwifiex_sdio_card_to_host_mp_aggr: no aggregation for cmd response
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304818] mwifiex_sdio mmc0:0001:1: info: RX: port: 0, rx_len: 256
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304853] mwifiex_sdio mmc0:0001:1: info: --- Rx: Cmd Response ---
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304869] mwifiex_sdio mmc0:0001:1: data: mp_rd_bitmap=0x0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304869] mwifiex_sdio mmc0:0001:1: info: no more rd_port available
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304886] mwifiex_sdio mmc0:0001:1: cmd: CMD_RESP: (1401090251.944819): 0x80e5, result 0, len 16, seqno 0x60
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304886] mwifiex_sdio mmc0:0001:1: event: hs_activated
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304903] mwifiex_sdio mmc0:0001:1: cmd: FREE_CMD: cmd=0xe5, cmd_pending=0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.304907] mwifiex_sdio: cmd: suspend with MMC_PM_KEEP_POWER|MMC_PM_WAKE_SDIO_IRQ
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307736] mmc0: keeping power over suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307736] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307749] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307749] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307751] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307753] [galcore] enter gpu_suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307793] [galcore] exit gpu_suspend, return 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.307859] PM: suspend of devices complete after 194.744 msecs
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.320018] olpc_ec_1_75_suspend: suspend sync 0000001f
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.340038] PM: late suspend of devices complete after 32.172 msecs
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.340307] PM: noirq suspend of devices complete after 0.263 msecs
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.340417] mmp3_pm_enter_d2
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.340417] before suspend
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.340430] after resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.372814] PM: noirq resume of devices complete after 0.098 msecs
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.391862] PM: early resume of devices complete after 18.934 msecs
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.391873] [galcore] enter gpu_resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.396056] [galcore] exit gpu_resume, return 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.396056] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.396070] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.396072] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  188.396074] sdhci_wakeup_irq
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341764] mmc0: Timeout waiting for hardware interrupt.
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341784] mwifiex_sdio mmc0:0001:1: read mp_regs failed
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341909] mwifiex_sdio mmc0:0001:1: cmd: HS_CFG_CMD: condition:0xffffffff gpio:0xff gap:0xff
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341909] mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xe5, cmd_pending=1
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341947] mwifiex_sdio mmc0:0001:1: cmd: DNLD_CMD: (1401090261.950120): 0xe5, act 0x1, len 16, seqno 0x61
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341947] mwifiex_sdio mmc0:0001:1: info: mwifiex_host_to_card_mp_aggr: tx aggregation disabled
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.341955] mwifiex_sdio mmc0:0001:1: data: mwifiex_host_to_card_mp_aggr: send current buffer 0
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.491758] mmp3_usb_phy_init_internal: Init usb phy!!!
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.492938] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.512492] dcon_source_switch to CPU
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.540126] olpc-dcon: The CPU has control
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.601954] usb usb1: usb resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.601954] pxau2o-ehci d4208000.usb: resume root hub after power loss
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.641757] hub 1-0:1.0: hub_resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.641771] hub 1-0:1.0: port 1: status 0507 change 0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.642147] usb 1-1: usb resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.701758] usb 1-1: finish reset-resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.821799] usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.972898] hub 1-1:1.0: hub_reset_resume
May 26 07:44:33 xo-96-6d-f4 kernel: [  198.972922] hub 1-1:1.0: enabling power on all ports
May 26 07:44:33 xo-96-6d-f4 kernel: [  199.082897] usb 1-1: link qh256-0001/cc319280 start 24 [1/0 us]
May 26 07:44:33 xo-96-6d-f4 kernel: [  199.083174] PM: resume of devices complete after 10691.142 msecs
May 26 07:44:33 xo-96-6d-f4 kernel: [  199.161211] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
May 26 07:44:33 xo-96-6d-f4 kernel: [  199.161230] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
May 26 07:44:33 xo-96-6d-f4 kernel: [  199.174348] mwifiex_sdio mmc0:0001:1: cmd: QUEUE_CMD: cmd=0xa4, cmd_pending=2
May 26 07:44:33 xo-96-6d-f4 kernel: [  199.157314] Restarting tasks ... done.
May 26 07:44:35 xo-96-6d-f4 kernel: [  201.181763] hub 1-1:1.0: hub_suspend
May 26 07:44:35 xo-96-6d-f4 kernel: [  201.181791] usb 1-1: unlink qh256-0001/cc319280 start 24 [1/0 us]
May 26 07:44:35 xo-96-6d-f4 kernel: [  201.182277] usb 1-1: usb auto-suspend, wakeup 1
May 26 07:44:37 xo-96-6d-f4 kernel: [  203.201793] hub 1-0:1.0: hub_suspend
May 26 07:44:37 xo-96-6d-f4 kernel: [  203.201793] usb usb1: bus auto-suspend, wakeup 1
May 26 07:44:37 xo-96-6d-f4 kernel: [  203.201824] pxau2o-ehci d4208000.usb: suspend root hub
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.361763] mwifiex_sdio mmc0:0001:1: mwifiex_cmd_timeout_func: Timeout cmd id (1401090282.719933) = 0xe5, act = 0x1
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.372259] mwifiex_sdio mmc0:0001:1: num_data_h2c_failure = 0
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.372259] mwifiex_sdio mmc0:0001:1: num_cmd_h2c_failure = 0
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.383751] mwifiex_sdio mmc0:0001:1: num_cmd_timeout = 1
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.383751] mwifiex_sdio mmc0:0001:1: num_tx_timeout = 0
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.394372] mwifiex_sdio mmc0:0001:1: last_cmd_index = 0
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.394380] last_cmd_id: 00000000: e5 00 e5 00 e5                                   .....
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.399655] last_cmd_act: 00000000: 01 00 01 00 02                                   .....
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.399655] mwifiex_sdio mmc0:0001:1: last_cmd_resp_index = 4
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.405379] last_cmd_resp_id: 00000000: 16 80 e5 80 e5                                   .....
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.405387] mwifiex_sdio mmc0:0001:1: last_event_index = 4
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.410828] last_event: 00000000: 47 00 47 00 47                                   G.G.G
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.410836] mwifiex_sdio mmc0:0001:1: data_sent=0 cmd_sent=1
May 26 07:44:42 xo-96-6d-f4 kernel: [  208.416453] mwifiex_sdio mmc0:0001:1: ps_mode=0 ps_state=0

James Cameron
http://quozl.linux.org.au/

Hi James,

This doesn't match the gpio parameter configured in hscfg command 0xe5.

[...]

gpio:0xff --> This configures firmware to use SDIO interface to wake up host. Could you change the gpio parameter to the actual GPIO pin number (from 8787 point of view)?

[...]

I was expecting that mwifiex_sdio_resume handler is called before the SDIO interrupt function is called.

Thanks,
Bing

You're right, and I'm quite wrong. Sorry about that. I misread our code.

Correction, we use SDIO to wake from WLAN.

We set gap to 0xff, which we think is a special value that means the device will wait for the host to acknowledge before sending data to the host.

Looking through history of development, we thought that this would avoid a race condition, where the host starts to suspend, configures the device for host sleep, but the device may wake in the time before the host suspends.

We don't see this "mmc0: Timeout waiting for hardware interrupt." problem unless we use WPA2. It does not reproduce on an open access point.

James Cameron
http://quozl.linux.org.au/

Hi James,

Yes, gap=0xff should be used. Actually I also have the patch to set gap to 0xff queued in my local tree. I will send it upstream.

With WPA2 enabled, does the "mmc0 timeout" happen in every suspend attempt?

Thanks,
Bing

Thanks. Today I have been testing with gap 50ms and no longer able to reproduce the "mmc0: Timeout waiting for hardware interrupt." problem.

No, it is rare, of the order of one in every 6000 attempts, and depends on the timing of arriving packets. Our reproducer uses a ping ramp, with interval varying from 0.1 to 0.9 seconds with 50ms increment, and this brings the problem frequency down to about one in 200 attempts.

The OLPC XO-4 by default tries to suspend automatically when user is idle, which is why we notice the problem.

James Cameron
http://quozl.linux.org.au/

Hi James,

Hmm, that's interesting.
The concern of none-0xff gap was that the SDIO interrupt could come in without acknowledgement from host. As long as XO-4 system (specifically mmc subsystem) can wake up within 50ms you are fine.

Good to know.

Thanks,
Bing

This does not happen. The SDIO interrupt function is always called before the mwifiex_sdio_resume handler.

Method to test:

@@ -712,6 +712,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
 	u32 sdio_ireg;
 	unsigned long flags;
 
+	if (adapter->is_suspended)
+		dev_warn(adapter->dev, "interrupt while adapter is suspended\n");
+
 	if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS,
 				   REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK,
 				   0)) {

# grep -c "after resume" /var/log/messages
630
# grep -c "interrupt while adapter" /var/log/messages
630

Also, sometimes mwifiex_sdio_suspend runs while an SDIO register operation is in progress, because of an interrupt. I can reduce the frequency of the "mmc0: Timeout..." if I delay suspend until the register option is completed.

This occurs roughly 3 out of 630 suspends.

The platform is not SMP, even though it is mmp3. So I made an unpleasant hack:

@@ -54,6 +54,8 @@ static DEFINE_RATELIMIT_STATE(noskb_rs,
 		120 * HZ,
 		1);
 
+volatile static bool in_progress;
+
 /*
  * SDIO probe.
  *

@@ -206,6 +208,22 @@ static int mwifiex_sdio_suspend(struct device *dev)
 	struct mwifiex_adapter *adapter;
 	mmc_pm_flag_t pm_flag = 0;
 	int ret = 0;
+	int i;
+
+	/* an attempt to avoid suspend for a short time while sdio i/o is in progress */
+	if (in_progress) {
+		pr_err("suspend: sdio i/o is in_progress, delaying\n");
+		WARN_ON_ONCE(1);
+
+		i = 50;
+		while (in_progress && i-- > 0) msleep(10);
+
+		if (in_progress) {
+			pr_err("suspend: sdio i/o was in_progress\n");
+			WARN_ON_ONCE(1);
+			return -EFAULT;
+		}
+	}
 
 	if (mwifiex_always_poweroff_on_sleep)
 		return -ENOSYS;

@@ -291,7 +309,9 @@ static int
 mwifiex_write_reg_locked(struct sdio_func *func, u32 reg, u8 data)
 {
 	int ret = -1;
+	in_progress = true;
 	sdio_writeb(func, data, reg, &ret);
+	in_progress = false;
 	return ret;
 }
 

@@ -321,9 +341,11 @@ mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u32 *data)
 	int ret = -1;
 	u8 val;
 
+	in_progress = true;
 	sdio_claim_host(card->func);
 	val = sdio_readb(card->func, reg, &ret);
 	sdio_release_host(card->func);
+	in_progress = false;
 
 	*data = val;
 

@@ -356,6 +378,8 @@ mwifiex_write_data_sync(struct mwifiex_adapter *adapter,
 		return -1;
 	}
 
+	in_progress = true;
+
 	sdio_claim_host(card->func);
 
 	if (!sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size))

@@ -363,6 +387,8 @@ mwifiex_write_data_sync(struct mwifiex_adapter *adapter,
 
 	sdio_release_host(card->func);
 
+	in_progress = false;
+
 	return ret;
 }
 

@@ -381,6 +407,8 @@ static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer,
 			: len;
 	u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK);
 
+	in_progress = true;
+
 	if (claim)
 		sdio_claim_host(card->func);
 

@@ -390,6 +418,8 @@ static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *buffer,
 	if (claim)
 		sdio_release_host(card->func);
 
+	in_progress = false;
+
 	return ret;
 }
 

@@ -1889,6 +1919,7 @@ mwifiex_sdio_init_module(void)
 
 	/* Clear the flag in case user removes the card. */
 	user_rmmod = 0;
+	in_progress = false;
 
 	return sdio_register_driver(&mwifiex_sdio);
 }

James Cameron
http://quozl.linux.org.au/

Hi James,

I see.