Skip to contentSkip to conversation

mtd: Introduce the use of the managed version of kzalloc

PATCH New Himangi Saraogi 2 participants 2 messages May 22, 2014 – May 28, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mtd: Introduce the use of the managed version of kzalloc

This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. Also, the now unnecessary label out_err_hw_init is done away with and the label out_err_kzalloc is renamed to out_err.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}

---
 drivers/mtd/nand/bf5xx_nand.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/mtd/nand/bf5xx_nand.c +4 -9
index b7a2494..722898a 100644
@@ -679,9 +679,6 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
 	peripheral_free_list(bfin_nfc_pin_req);
 	bf5xx_nand_dma_remove(info);
 
-	/* free the common resources */
-	kfree(info);
-
 	return 0;
 }
 
@@ -742,10 +739,10 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
 		err = -ENOMEM;
-		goto out_err_kzalloc;
+		goto out_err;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -790,7 +787,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	/* initialise the hardware */
 	err = bf5xx_nand_hw_init(info);
 	if (err)
-		goto out_err_hw_init;
+		goto out_err;
 
 	/* setup hardware ECC data struct */
 	if (hardware_ecc) {
@@ -827,9 +824,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 out_err_nand_scan:
 	bf5xx_nand_dma_remove(info);
-out_err_hw_init:
-	kfree(info);
-out_err_kzalloc:
+out_err:
 	peripheral_free_list(bfin_nfc_pin_req);
 
 	return err;
Signature · 1 line
1.9.1
#1 lore raw

PATCH 1/1 mtd: bf5xx_nand: use the managed version of kzalloc (Re: [PATCH] mtd: Introduce the use of the managed version of kzalloc)

Quoted 38 lines · Himangi Saraogi

This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. Also, the now unnecessary label out_err_hw_init is done away with and the label out_err_kzalloc is renamed to out_err.

The following Coccinelle semantic patch was used for making the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}

Quoted 1 line

Improved the subject and pushed to l2-mtd.git. Thanks!

Brian