Skip to contentSkip to conversation

ahci: Add Device ID for HighPoint RocketRaid 642L

PATCH Applied Jérôme Carretero 2 participants 5 messages May 30, 2014 – Jun 3, 2014 libata

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ahci: Add Device ID for HighPoint RocketRaid 642L

This device normally comes with a proprietary driver, using a web GUI to configure RAID:
http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235.

Devices 640L, 644L, 644LS should also be supported but not tested here.

---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/ata/ahci.c +2 -0
index 6070781..ff5543f 100644
@@ -449,6 +449,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
 	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642,
+	  .driver_data = board_ahci_yes_fbs },
 
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
Signature · 1 line
1.9.3
Applied
#1 lore raw
Quoted 9 lines · Jérôme Carretero

This device normally comes with a proprietary driver, using a web GUI to configure RAID:
http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235.

Devices 640L, 644L, 644LS should also be supported but not tested here.

Applied to libata/for-3.16 w/ stable cc'd.

Thanks.

Signature · 1 line
tejun
#2 lore raw
Quoted 7 lines · Tejun Heo
Quoted 6 lines · Jérôme Carretero

This device normally comes with a proprietary driver, using a web GUI to configure RAID:
http://www.highpoint-tech.com/USA_new/series_rr600-download.htm
But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235.

Quoted 5 lines
Quoted 3 lines

Devices 640L, 644L, 644LS should also be supported but not tested here.

Applied to libata/for-3.16 w/ stable cc'd.

Ugh... build failure from missing ')'. Please at least try to compile the changes before submitting patches.

Signature · 1 line
tejun
#3 lore raw
Quoted 2 lines · On Tue, 3 Jun 2014 14:41:40 -0400 Tejun Heo <[email protected]> wrote:

Ugh... build failure from missing ')'. Please at least try to compile the changes before submitting patches.

Argh. Sorry, I hadn't used git send-mail and missed the copy/paste... Shall I send a corrected version or you fixed it?

Signature · 1 line
Jérôme
#4 lore raw
Quoted 2 lines · Jérôme Carretero

Argh. Sorry, I hadn't used git send-mail and missed the copy/paste... Shall I send a corrected version or you fixed it?

Yes, please.

Thanks.

Signature · 1 line
tejun