ARM: dts: imx25: mbimxsd25: Add displays support.

The CMO-QVGA, DVI-VGA and DVI-SVGA displays were added.

---
ChangeLog v15->v16:
- Added the dtb targets in the Makefile.
- Removed the redundant enable-active-high.
- Simplified the commit description.

ChangeLog v14->v15:
- Moved the Cc into git-send-email.
- Added a reg property in the regulator at 0 node.

ChangeLog v13->v14:
- Remove people not concerned by this patch from the Cc list.
- changed the fsl,pwmr lcdc property to fsl,lpccr, to match the previous patches in that serie.

ChangeLog v10->v13:
- This patch is the display part splitted out from the patch adding support for the cpuimx25(and its baseboard).
- Shawn Guo was added to the Cc list.
- The regulator part was updated to match the current style.
- The new GPIO defines are now used in the dts(i).

---
 arch/arm/boot/dts/Makefile                         |    3 +
 .../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts  |   72 ++++++++++++++++++++
 .../imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts  |   45 ++++++++++++
 .../imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts   |   45 ++++++++++++
 4 files changed, 165 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts

index da711dc..33a6419 100644
@@ -155,6 +155,9 @@ dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-eukrea-mbimxsd25-baseboard.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
+	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
 	imx25-karo-tx25.dtb \
 	imx25-pdk.dtb \
 	imx27-apf27.dtb \

1.7.9.5

Applied, thanks.