Skip to contentSkip to conversation

ARM: i.MX1 clk: Add devicetree support

PATCH New Alexander Shiyan 3 participants 8 messages May 20, 2014 – Jun 3, 2014

Subsystems (8)
Device tree bindings Arm (32-bit) Sound Arm sub-architectures +4 more subsystems
lore
Share & tools
lore

Alexander Shiyan

author
#0 lore raw

PATCH v2 1/1 ARM: i.MX1 clk: Add devicetree support

This patch adds devicetree support CCM module for i.MX1 (MC9328MX1) CPUs.

Signed-off-by Alexander Shiyan <[email protected]>
---
 .../devicetree/bindings/clock/imx1-clock.txt       |  26 ++++
 arch/arm/mach-imx/clk-imx1.c                       | 153 +++++++++++----------
 include/dt-bindings/clock/imx1-clock.h             |  40 ++++++
 3 files changed, 148 insertions(+), 71 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/imx1-clock.txt
 create mode 100644 include/dt-bindings/clock/imx1-clock.h
Documentation/devicetree/bindings/clock/imx1-clock.txt new file +26 -0
new file mode 100644
index 0000000..b7adf4e
@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm at 0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm at 00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};
arch/arm/mach-imx/clk-imx1.c +82 -71

182 lines not on this page · raw message

include/dt-bindings/clock/imx1-clock.h new file +40 -0
new file mode 100644
index 0000000..607bf01
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX1_H
+#define __DT_BINDINGS_CLOCK_IMX1_H
+
+#define IMX1_CLK_DUMMY		0
+#define IMX1_CLK_CLK32		1
+#define IMX1_CLK_CLK16M_EXT	2
+#define IMX1_CLK_CLK16M		3
+#define IMX1_CLK_CLK32_PREMULT	4
+#define IMX1_CLK_PREM		5
+#define IMX1_CLK_MPLL		6
+#define IMX1_CLK_MPLL_GATE	7
+#define IMX1_CLK_SPLL		8
+#define IMX1_CLK_SPLL_GATE	9
+#define IMX1_CLK_MCU		10
+#define IMX1_CLK_FCLK		11
+#define IMX1_CLK_HCLK		12
+#define IMX1_CLK_CLK48M		13
+#define IMX1_CLK_PER1		14
+#define IMX1_CLK_PER2		15
+#define IMX1_CLK_PER3		16
+#define IMX1_CLK_CLKO		17
+#define IMX1_CLK_UART3_GATE	18
+#define IMX1_CLK_SSI2_GATE	19
+#define IMX1_CLK_BROM_GATE	20
+#define IMX1_CLK_DMA_GATE	21
+#define IMX1_CLK_CSI_GATE	22
+#define IMX1_CLK_MMA_GATE	23
+#define IMX1_CLK_USBD_GATE	24
+#define IMX1_CLK_MAX		25
+
+#endif
Signature · 1 line
1.8.5.5
author
#1 lore raw

PATCH 1/1 ARM: i.MX: Compile FIQ code for AVIC & TZIC only

There are no reason to compile FIQ specific code for GIC IRQ controller (i.MX6). This patch restrict compilation for FIQ specific code for AVIC and TZIC only.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-imx/Makefile +3 -3
index bbe93bb..620a760 100644
@@ -1,4 +1,4 @@
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := time.o cpu.o system.o
 
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o

@@ -21,8 +21,8 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
+obj-$(CONFIG_MXC_TZIC) += tzic.o irq-common.o
+obj-$(CONFIG_MXC_AVIC) += avic.o irq-common.o
 
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
Signature · 1 line
1.8.5.5
#2 lore raw

Re: [PATCH] ARM: i.MX: Compile FIQ code for AVIC & TZIC only

Hi,

Quoted 21 lines · Alexander Shiyan

There are no reason to compile FIQ specific code for GIC IRQ controller (i.MX6). This patch restrict compilation for FIQ specific code for AVIC and TZIC only.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-imx/Makefile +1 -1
index bbe93bb..620a760 100644
@@ -1,4 +1,4 @@
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := time.o cpu.o system.o
 
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o

arch/arm/mach-imx/Makefile obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ · line 28

Quoted 10 lines
arch/arm/mach-imx/Makefile +2 -2
@@ -21,8 +21,8 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
+obj-$(CONFIG_MXC_TZIC) += tzic.o irq-common.o
+obj-$(CONFIG_MXC_AVIC) += avic.o irq-common.o
 
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o

This patch introduces a build error in sound/soc/fsl/imx-pcm-fiq.c:
sound/built-in.o: In function `imx_pcm_fiq_free':
last.c:(.text+0x2aca8): undefined reference to mxc_set_irq_fiq' sound/built-in.o: In function imx_pcm_fiq_init':
last.c:(.text+0x2b1a4): undefined reference to mxc_set_irq_fiq' last.c:(.text+0x2b200): undefined reference to mxc_set_irq_fiq' make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

This could be fixed with the following patch:

sound/soc/fsl/Kconfig 2014-06-02 11:25:38.411960595 +0200 renamed from sound/soc/fsl/Kconfig 2014-06-02 11:25:38.315960451 +0200 +0 -0
@@ -15,7 +15,7 @@
 config SND_SOC_FSL_SSI

	tristate "Synchronous Serial Interface module support"
	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n

- select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && ARCH_MXC
+ select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_AVIC || MXC_TZIC)
help
Say Y if you want to add Synchronous Serial Interface (SSI) support for the Freescale CPUs.

Lothar Waßmann

Signature · 14 lines
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | [email protected]
___________________________________________________________

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#3 lore raw

Re: [PATCH] ARM: i.MX: Compile FIQ code for AVIC & TZIC only

Mon, 2 Jun 2014 11:33:27 +0200 ?? Lothar Wa?mann <[email protected]>:

Quoted 47 lines

Hi,

Quoted 21 lines · Alexander Shiyan

There are no reason to compile FIQ specific code for GIC IRQ controller (i.MX6). This patch restrict compilation for FIQ specific code for AVIC and TZIC only.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-imx/Makefile +1 -1
index bbe93bb..620a760 100644
@@ -1,4 +1,4 @@
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := time.o cpu.o system.o
 
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o

arch/arm/mach-imx/Makefile obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ · line 28

Quoted 10 lines
arch/arm/mach-imx/Makefile +2 -2
@@ -21,8 +21,8 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
+obj-$(CONFIG_MXC_TZIC) += tzic.o irq-common.o
+obj-$(CONFIG_MXC_AVIC) += avic.o irq-common.o
 
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o

This patch introduces a build error in sound/soc/fsl/imx-pcm-fiq.c:
sound/built-in.o: In function `imx_pcm_fiq_free':
last.c:(.text+0x2aca8): undefined reference to mxc_set_irq_fiq' sound/built-in.o: In function imx_pcm_fiq_init':
last.c:(.text+0x2b1a4): undefined reference to mxc_set_irq_fiq' last.c:(.text+0x2b200): undefined reference to mxc_set_irq_fiq' make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

This could be fixed with the following patch:

sound/soc/fsl/Kconfig 2014-06-02 11:25:38.411960595 +0200 line 18

Quoted 5 lines
sound/soc/fsl/Kconfig 2014-06-02 11:25:38.411960595 +0200 renamed from sound/soc/fsl/Kconfig 2014-06-02 11:25:38.315960451 +0200 +1 -1
@@ -15,7 +15,7 @@
 config SND_SOC_FSL_SSI
 	tristate "Synchronous Serial Interface module support"
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
-	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && ARCH_MXC
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_AVIC || MXC_TZIC)

...

No. This will break building fsl-ssi for PPC and i.MX6, so let's just drop original patch for a while.

---

#4 lore raw

Re: [PATCH] ARM: i.MX: Compile FIQ code for AVIC & TZIC only

Hi,

Quoted 55 lines · Alexander Shiyan

Mon, 2 Jun 2014 11:33:27 +0200 ?? Lothar Wa?mann <[email protected]>:

Quoted 52 lines

Hi,

Quoted 21 lines · Alexander Shiyan

There are no reason to compile FIQ specific code for GIC IRQ controller (i.MX6). This patch restrict compilation for FIQ specific code for AVIC and TZIC only.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-imx/Makefile +1 -1
index bbe93bb..620a760 100644
@@ -1,4 +1,4 @@
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := time.o cpu.o system.o
 
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o

arch/arm/mach-imx/Makefile obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ · line 28

Quoted 10 lines
arch/arm/mach-imx/Makefile +2 -2
@@ -21,8 +21,8 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
+obj-$(CONFIG_MXC_TZIC) += tzic.o irq-common.o
+obj-$(CONFIG_MXC_AVIC) += avic.o irq-common.o
 
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o

This patch introduces a build error in sound/soc/fsl/imx-pcm-fiq.c:
sound/built-in.o: In function `imx_pcm_fiq_free':
last.c:(.text+0x2aca8): undefined reference to mxc_set_irq_fiq' sound/built-in.o: In function imx_pcm_fiq_init':
last.c:(.text+0x2b1a4): undefined reference to mxc_set_irq_fiq' last.c:(.text+0x2b200): undefined reference to mxc_set_irq_fiq' make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

This could be fixed with the following patch:

sound/soc/fsl/Kconfig 2014-06-02 11:25:38.411960595 +0200 renamed from sound/soc/fsl/Kconfig 2014-06-02 11:25:38.315960451 +0200 +1 -1
@@ -15,7 +15,7 @@
 config SND_SOC_FSL_SSI
 	tristate "Synchronous Serial Interface module support"
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
-	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && ARCH_MXC
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_AVIC || MXC_TZIC)

...

Quoted 2 lines

No. This will break building fsl-ssi for PPC and i.MX6, so let's just drop original patch for a while.

Why and how?
MXC_AVIC or MXC_TZIC are just more specific than ARCH_MXC and will be set only on ARCH_MXC when there is either a TZIC or AVIC controller selected.
The PPC driver won't have ARCH_MXC defined anyway. Thus there will be no change for that one

I've successfully build the driver on i.MX6.

Lothar Wa?mann

Signature · 9 lines
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Gesch?ftsf?hrer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________
#5 lore raw

Re: [PATCH] ARM: i.MX: Compile FIQ code for AVIC & TZIC only

In reply to Alexander Shiyan
Quoted 55 lines · Alexander Shiyan

Mon, 2 Jun 2014 11:33:27 +0200 ?? Lothar Wa?mann <[email protected]>:

Quoted 52 lines

Hi,

Quoted 21 lines · Alexander Shiyan

There are no reason to compile FIQ specific code for GIC IRQ controller (i.MX6). This patch restrict compilation for FIQ specific code for AVIC and TZIC only.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/mach-imx/Makefile +1 -1
index bbe93bb..620a760 100644
@@ -1,4 +1,4 @@
-obj-y := time.o cpu.o system.o irq-common.o
+obj-y := time.o cpu.o system.o
 
 obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o

arch/arm/mach-imx/Makefile obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ · line 28

Quoted 10 lines
arch/arm/mach-imx/Makefile +2 -2
@@ -21,8 +21,8 @@ obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 
-obj-$(CONFIG_MXC_TZIC) += tzic.o
-obj-$(CONFIG_MXC_AVIC) += avic.o
+obj-$(CONFIG_MXC_TZIC) += tzic.o irq-common.o
+obj-$(CONFIG_MXC_AVIC) += avic.o irq-common.o
 
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o

This patch introduces a build error in sound/soc/fsl/imx-pcm-fiq.c:
sound/built-in.o: In function `imx_pcm_fiq_free':
last.c:(.text+0x2aca8): undefined reference to mxc_set_irq_fiq' sound/built-in.o: In function imx_pcm_fiq_init':
last.c:(.text+0x2b1a4): undefined reference to mxc_set_irq_fiq' last.c:(.text+0x2b200): undefined reference to mxc_set_irq_fiq' make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2

This could be fixed with the following patch:

sound/soc/fsl/Kconfig 2014-06-02 11:25:38.411960595 +0200 renamed from sound/soc/fsl/Kconfig 2014-06-02 11:25:38.315960451 +0200 +1 -1
@@ -15,7 +15,7 @@
 config SND_SOC_FSL_SSI
 	tristate "Synchronous Serial Interface module support"
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
-	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && ARCH_MXC
+	select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_AVIC || MXC_TZIC)

...

Quoted 1 line

No. This will break building fsl-ssi for PPC and i.MX6, so let's just drop original patch for a while.

Ok, patch dropped for now.

Shawn

author
#6 lore raw

PATCH 1/1 ARM: i.MX: Remove registration helper for i.MX1 USB UDC

In reply to Alexander Shiyan

imx_udc driver was removed from the kernel of about 10 months ago. This patch removes a registration helper for this driver and orphaned driver header.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/devices/Kconfig            |  3 --
 arch/arm/mach-imx/devices/Makefile           |  1 -
 arch/arm/mach-imx/devices/devices-common.h   | 16 ------
 arch/arm/mach-imx/devices/platform-imx_udc.c | 75 ----------------------------
 include/linux/platform_data/usb-imx_udc.h    | 23 ---------
 5 files changed, 118 deletions(-)
 delete mode 100644 arch/arm/mach-imx/devices/platform-imx_udc.c
 delete mode 100644 include/linux/platform_data/usb-imx_udc.h
arch/arm/mach-imx/devices/Kconfig +0 -3
index 2d260a5..dd7e0b4 100644
@@ -43,9 +43,6 @@ config IMX_HAVE_PLATFORM_IMX_SSI
 config IMX_HAVE_PLATFORM_IMX_UART
 	bool
 
-config IMX_HAVE_PLATFORM_IMX_UDC
-	bool
-
 config IMX_HAVE_PLATFORM_IPU_CORE
 	bool
arch/arm/mach-imx/devices/Makefile +0 -1
index 1cbc14c..6bb144d 100644
@@ -16,7 +16,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IPU_CORE) += platform-ipu-core.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
arch/arm/mach-imx/devices/devices-common.h +0 -16
index 61352a8..69bafc8 100644
@@ -176,22 +176,6 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata);
 
-#include <linux/platform_data/usb-imx_udc.h>
-struct imx_imx_udc_data {
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq0;
-	resource_size_t irq1;
-	resource_size_t irq2;
-	resource_size_t irq3;
-	resource_size_t irq4;
-	resource_size_t irq5;
-	resource_size_t irq6;
-};
-struct platform_device *__init imx_add_imx_udc(
-		const struct imx_imx_udc_data *data,
-		const struct imxusb_platform_data *pdata);
-
 #include <linux/platform_data/video-mx3fb.h>
 #include <linux/platform_data/camera-mx3.h>
 struct imx_ipu_core_data {
arch/arm/mach-imx/devices/platform-imx_udc.c deleted +0 -75

75 lines not on this page · raw message

include/linux/platform_data/usb-imx_udc.h deleted +0 -23
deleted file mode 100644
index be27337..0000000
@@ -1,23 +0,0 @@
-/*
- *	Copyright (C) 2008 Darius Augulis <[email protected]>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
Signature · 1 line
1.8.5.5