Round of external toolchain updates
cover Round of external toolchain updates
Hello,
Here is a round of external toolchain updates, mainly bumping the versions of the various toolchains we have, and a few improvements to the kernel headers version check.
Thanks,
Thomas
Thomas Petazzoni (11):
toolchain-external: apply kernel headers check to non-custom
toolchains
toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel
headers check
toolchain-external: support only one Linaro ARM toolchain at a time
toolchain-external: support only one Linaro AArch64 toolchain at a
time
toolchain-external: bump Linaro ARM to 2014.05
toolchain-external: bump Linaro ARMeb toolchain to 2014.04
toolchain-external: bump Linaro AArch64 toolchain to 2014.05
toolchain-external: bump musl external toolchains to 1.1.1
toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09
toolchain-external: add CodeSourcery PowerPC 2012.03
toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1
toolchain/toolchain-external/Config.in | 200 +++++++++------------ toolchain/toolchain-external/toolchain-external.mk | 86 ++++----- 2 files changed, 119 insertions(+), 167 deletions(-)
Signature · 1 line
1.9.3
PATCH 1/11 toolchain-external: apply kernel headers check to non-custom toolchains
Since the introduction of the kernel headers Config.in options, the external toolchain logic had a check for custom external toolchains to verify that the kernel headers version entered by the user matches the one of the toolchain. However, this check was not made for non-custom external toolchains (i.e the built-in profiles, such as Linaro, CodeSourcery and al.), making the assumption that the Buildroot developers will do the right selection.
However, it is quite nice when bumping external toolchains to have this automatic kernel headers version check, to ensure we select the appropriate kernel headers version.
Therefore, this commit makes the kernel headers version check applicable to non-custom external toolchains.
Cc Yann E. MORIN <[email protected]>
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/toolchain-external.mk | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
toolchain/toolchain-external/toolchain-external.mk +3 -5
@@ -466,11 +466,9 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ exit 1 ; \ fi ; \ - if [ "$(BR2_TOOLCHAIN_EXTERNAL_CUSTOM)" = "y" ]; then \ - $(call check_kernel_headers_version,\ - $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\ - $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ - fi ; \ + $(call check_kernel_headers_version,\ + $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\ + $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ if test "$(BR2_arm)" = "y" ; then \ $(call check_arm_abi,\ "$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\
Signature · 1 line
1.9.3
PATCH 1/11 toolchain-external: apply kernel headers check to non-custom toolchains
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 12 lines
Since the introduction of the kernel headers Config.in options, the external toolchain logic had a check for custom external toolchains to verify that the kernel headers version entered by the user matches the one of the toolchain. However, this check was not made for non-custom external toolchains (i.e the built-in profiles, such as Linaro, CodeSourcery and al.), making the assumption that the Buildroot developers will do the right selection.
However, it is quite nice when bumping external toolchains to have this automatic kernel headers version check, to ensure we select the appropriate kernel headers version.
Quoted 5 lines
Therefore, this commit makes the kernel headers version check applicable to non-custom external toolchains.
Cc Yann E. MORIN <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>
Acked-by "Yann E. MORIN" <[email protected]>
Regards,
Yann E. MORIN.
Quoted 26 lines
--- toolchain/toolchain-external/toolchain-external.mk | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)toolchain/toolchain-external/toolchain-external.mk +3
-5@@ -466,11 +466,9 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ exit 1 ; \ fi ; \ - if [ "$(BR2_TOOLCHAIN_EXTERNAL_CUSTOM)" = "y" ]; then \ - $(call check_kernel_headers_version,\ - $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\ - $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ - fi ; \ + $(call check_kernel_headers_version,\ + $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\ + $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ if test "$(BR2_arm)" = "y" ; then \ $(call check_arm_abi,\ "$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\Signature · 1 line
1.9.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 2/11 toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check
In reply to Thomas PetazzoniWhen getting the sysroot used for the kernel headers version check, passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with multilib toolchains, where only the main sysroot has the header files, and the other sysroots only have the libraries.
Since the kernel headers version used is normally the same for all sysroots, this commit solves this problem by removing the TOOLCHAIN_EXTERNAL_CFLAGS argument when calling toolchain_find_sysroot, so that it returns the main sysroot, in which <linux/version.h> can be found for the kernel headers version check.
Cc Yann E. MORIN <[email protected]>
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/toolchain-external.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
toolchain/toolchain-external/toolchain-external.mk +1 -1
@@ -467,7 +467,7 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS exit 1 ; \ fi ; \ $(call check_kernel_headers_version,\ - $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\ + $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\ $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ if test "$(BR2_arm)" = "y" ; then \ $(call check_arm_abi,\
Signature · 1 line
1.9.3
PATCH 2/11 toolchain-external: do not pass TOOLCHAIN_EXTERNAL_CFLAGS for kernel headers check
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 5 lines
When getting the sysroot used for the kernel headers version check, passing
TOOLCHAIN_EXTERNAL_CFLAGScauses a problem when used with multilib toolchains, where only the main sysroot has the header files, and the other sysroots only have the libraries.
Quoted 8 lines
Since the kernel headers version used is normally the same for all sysroots, this commit solves this problem by removing the
TOOLCHAIN_EXTERNAL_CFLAGSargument when callingtoolchain_find_sysroot, so that it returns the main sysroot, in which <linux/version.h> can be found for the kernel headers version check.Cc Yann E. MORIN <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>
I don't have a setup handy for testing this, so it's only a reviewed-by. But I don't expect it to break anything.
Regards,
Yann E. MORIN.
Quoted 20 lines
--- toolchain/toolchain-external/toolchain-external.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)toolchain/toolchain-external/toolchain-external.mk +1
-1@@ -467,7 +467,7 @@ define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS exit 1 ; \ fi ; \ $(call check_kernel_headers_version,\ - $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)),\ + $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\ $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ if test "$(BR2_arm)" = "y" ; then \ $(call check_arm_abi,\Signature · 1 line
1.9.3
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 3/11 toolchain-external: support only one Linaro ARM toolchain at a time
In reply to Thomas PetazzoniLinaro toolchains are released so frequently (every month) that it doesn't make much sense to support 3 consecutive versions. So, like we do for ARM big-endian, let's support only one version at a time.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 52 ++-------------------- toolchain/toolchain-external/toolchain-external.mk | 10 +---- 2 files changed, 4 insertions(+), 58 deletions(-)
toolchain/toolchain-external/Config.in +3 -49
@@ -6,8 +6,8 @@ choice comment "(e)glibc toolchains only available with shared lib support" depends on BR2_PREFER_STATIC_LIB -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02 - bool "Linaro 2014.02" +config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM + bool "Linaro ARM 2014.02" depends on BR2_arm depends on BR2_GCC_TARGET_ARCH = "armv7-a" depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
@@ -28,50 +28,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02 with the hard floating point calling convention, and uses the VFPv3-D16 FPU instructions. -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01 - bool "Linaro 2014.01" - depends on BR2_arm - depends on BR2_GCC_TARGET_ARCH = "armv7-a" - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on BR2_ARM_EABIHF - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 - help - Linaro toolchain for the ARM architecture. It uses Linaro - GCC 2014.01 (based on gcc 4.8), Linaro GDB 2013.10 (based on - GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It - generates code that runs on all Cortex-A profile devices, - but tuned for the Cortex-A9. The code generated is Thumb 2, - with the hard floating point calling convention, and uses - the VFPv3-D16 FPU instructions. - -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12 - bool "Linaro 2013.12" - depends on BR2_arm - depends on BR2_GCC_TARGET_ARCH = "armv7-a" - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on BR2_ARM_EABIHF - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 - help - Linaro toolchain for the ARM architecture. It uses Linaro - GCC 2013.12 (based on gcc 4.8), Linaro GDB 2013.10 (based on - GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It - generates code that runs on all Cortex-A profile devices, - but tuned for the Cortex-A9. The code generated is Thumb 2, - with the hard floating point calling convention, and uses - the VFPv3-D16 FPU instructions. - comment "Linaro toolchains available for Cortex-A + EABIhf" depends on BR2_arm depends on BR2_GCC_TARGET_ARCH != "armv7-a" || !BR2_ARM_EABIHF
@@ -938,9 +894,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX config BR2_TOOLCHAIN_EXTERNAL_PREFIX string - default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02 - default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01 - default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12 + default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM default "armeb-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203 default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305
toolchain/toolchain-external/toolchain-external.mk +1 -9
@@ -275,15 +275,7 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/ rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/ endef -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.01_linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02),y) +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK
Signature · 1 line
1.9.3
PATCH 3/11 toolchain-external: support only one Linaro ARM toolchain at a time
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 5 lines
Linaro toolchains are released so frequently (every month) that it doesn't make much sense to support 3 consecutive versions. So, like we do for ARM big-endian, let's support only one version at a time.
Signed-off-by Thomas Petazzoni <[email protected]>
Acked-by "Yann E. MORIN" <[email protected]>
Regards,
Yann E. MORIN.
Quoted 110 lines
--- toolchain/toolchain-external/Config.in | 52 ++-------------------- toolchain/toolchain-external/toolchain-external.mk | 10 +---- 2 files changed, 4 insertions(+), 58 deletions(-)toolchain/toolchain-external/Config.in +3
-49@@ -6,8 +6,8 @@ choice comment "(e)glibc toolchains only available with shared lib support" depends on BR2_PREFER_STATIC_LIB -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02 - bool "Linaro 2014.02" +config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM + bool "Linaro ARM 2014.02" depends on BR2_arm depends on BR2_GCC_TARGET_ARCH = "armv7-a" depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"@@ -28,50 +28,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02 with the hard floating point calling convention, and uses the VFPv3-D16 FPU instructions. -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01 - bool "Linaro 2014.01" - depends on BR2_arm - depends on BR2_GCC_TARGET_ARCH = "armv7-a" - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on BR2_ARM_EABIHF - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 - help - Linaro toolchain for the ARM architecture. It uses Linaro - GCC 2014.01 (based on gcc 4.8), Linaro GDB 2013.10 (based on - GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It - generates code that runs on all Cortex-A profile devices, - but tuned for the Cortex-A9. The code generated is Thumb 2, - with the hard floating point calling convention, and uses - the VFPv3-D16 FPU instructions. - -config BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12 - bool "Linaro 2013.12" - depends on BR2_arm - depends on BR2_GCC_TARGET_ARCH = "armv7-a" - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on BR2_ARM_EABIHF - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 - help - Linaro toolchain for the ARM architecture. It uses Linaro - GCC 2013.12 (based on gcc 4.8), Linaro GDB 2013.10 (based on - GDB 7.6), eglibc 2.18, Binutils 2013.11 (based on 2.24). It - generates code that runs on all Cortex-A profile devices, - but tuned for the Cortex-A9. The code generated is Thumb 2, - with the hard floating point calling convention, and uses - the VFPv3-D16 FPU instructions. - comment "Linaro toolchains available for Cortex-A + EABIhf" depends on BR2_arm depends on BR2_GCC_TARGET_ARCH != "armv7-a" || !BR2_ARM_EABIHF@@ -938,9 +894,7 @@ config BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX config BR2_TOOLCHAIN_EXTERNAL_PREFIX string - default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02 - default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01 - default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12 + default "arm-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM default "armeb-linux-gnueabihf" if BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201203 default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305toolchain/toolchain-external/toolchain-external.mk +1
-9@@ -275,15 +275,7 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/ rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/ endef -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2013_12),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_01),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.01_linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_2014_02),y) +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINKSignature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 4/11 toolchain-external: support only one Linaro AArch64 toolchain at a time
In reply to Thomas PetazzoniLinaro toolchains are released so frequently (every month) that it doesn't make much sense to support 3 consecutive versions. So, like we do for ARM big-endian, let's support only one version at a time.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 34 ++-------------------- toolchain/toolchain-external/toolchain-external.mk | 10 +------ 2 files changed, 3 insertions(+), 41 deletions(-)
toolchain/toolchain-external/Config.in +2 -32
@@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 Toolchain for the Microblaze architecture, from http://wiki.xilinx.com/mb-gnu-tools -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02 +config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 bool "Linaro AArch64 14.02" depends on BR2_aarch64 depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
@@ -796,34 +796,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02 Toolchain for the AArch64 architecture, from http://www.linaro.org/engineering/armv8/ -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01 - bool "Linaro AArch64 14.01" - depends on BR2_aarch64 - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7 - help - Toolchain for the AArch64 architecture, from - http://www.linaro.org/engineering/armv8/ - -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12 - bool "Linaro AArch64 13.12" - depends on BR2_aarch64 - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7 - help - Toolchain for the AArch64 architecture, from - http://www.linaro.org/engineering/armv8/ - config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS bool "Musl toolchain" depends on (BR2_arm && BR2_ARM_EABI) || (BR2_armeb && BR2_ARM_EABI) || \
@@ -901,9 +873,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311 default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109 default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109 - default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02 - default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01 - default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12 + default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3 default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2 default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3
toolchain/toolchain-external/toolchain-external.mk +1 -9
@@ -350,15 +350,7 @@ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblaze-unknown-linux-gnu_14.3_early.tar.xz else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2013.12-linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02),y) +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK
Signature · 1 line
1.9.3
PATCH 4/11 toolchain-external: support only one Linaro AArch64 toolchain at a time
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 5 lines
Linaro toolchains are released so frequently (every month) that it doesn't make much sense to support 3 consecutive versions. So, like we do for ARM big-endian, let's support only one version at a time.
Signed-off-by Thomas Petazzoni <[email protected]>
Acked-by "Yann E. MORIN" <[email protected]>
Regards,
Yann E. MORIN.
Quoted 92 lines
--- toolchain/toolchain-external/Config.in | 34 ++-------------------- toolchain/toolchain-external/toolchain-external.mk | 10 +------ 2 files changed, 3 insertions(+), 41 deletions(-)toolchain/toolchain-external/Config.in +2
-32@@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 Toolchain for the Microblaze architecture, from http://wiki.xilinx.com/mb-gnu-tools -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02 +config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 bool "Linaro AArch64 14.02" depends on BR2_aarch64 depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"@@ -796,34 +796,6 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02 Toolchain for the AArch64 architecture, from http://www.linaro.org/engineering/armv8/ -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01 - bool "Linaro AArch64 14.01" - depends on BR2_aarch64 - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7 - help - Toolchain for the AArch64 architecture, from - http://www.linaro.org/engineering/armv8/ - -config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12 - bool "Linaro AArch64 13.12" - depends on BR2_aarch64 - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_EXTERNAL_GLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_7 - help - Toolchain for the AArch64 architecture, from - http://www.linaro.org/engineering/armv8/ - config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS bool "Musl toolchain" depends on (BR2_arm && BR2_ARM_EABI) || (BR2_armeb && BR2_ARM_EABI) || \@@ -901,9 +873,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "arm-none-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311 default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109 default "arm-arago-linux-gnueabi" if BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109 - default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02 - default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01 - default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12 + default "aarch64-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3 default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2 default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3toolchain/toolchain-external/toolchain-external.mk +1
-9@@ -350,15 +350,7 @@ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblaze-unknown-linux-gnu_14.3_early.tar.xz else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_13_12),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/13.12/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2013.12-linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_01),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.01/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.01_linux.tar.xz -TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_14_02),y) +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINKSignature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 5/11 toolchain-external: bump Linaro ARM to 2014.05
In reply to Thomas PetazzoniThe major changes are: switch to gcc 4.9 instead of 4.8, and switch to glibc 2.19 instead of glibc 2.18.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 7 +++---- toolchain/toolchain-external/toolchain-external.mk | 4 ++-- 2 files changed, 5 insertions(+), 6 deletions(-)
toolchain/toolchain-external/Config.in +3 -4
@@ -7,13 +7,12 @@ comment "(e)glibc toolchains only available with shared lib support" depends on BR2_PREFER_STATIC_LIB config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM - bool "Linaro ARM 2014.02" + bool "Linaro ARM 2014.05" depends on BR2_arm depends on BR2_GCC_TARGET_ARCH = "armv7-a" depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on BR2_ARM_EABIHF depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP
@@ -21,8 +20,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 help Linaro toolchain for the ARM architecture. It uses Linaro - GCC 2014.02 (based on gcc 4.8), Linaro GDB 2013.10 (based on - GDB 7.6), eglibc 2.18, Binutils 2014.02 (based on 2.24). It + GCC 2014.05 (based on gcc 4.9), Linaro GDB 2014.05 (based on + GDB 7.6), eglibc 2.19, Binutils 2014.05 (based on 2.24). It generates code that runs on all Cortex-A profile devices, but tuned for the Cortex-A9. The code generated is Thumb 2, with the hard floating point calling convention, and uses
toolchain/toolchain-external/toolchain-external.mk +2 -2
@@ -276,8 +276,8 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/ endef else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/ +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/
Signature · 1 line
1.9.3
PATCH 5/11 toolchain-external: bump Linaro ARM to 2014.05
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 4 lines
The major changes are: switch to gcc 4.9 instead of 4.8, and switch to glibc 2.19 instead of glibc 2.18.
Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>
Regards,
Yann E. MORIN.
Quoted 57 lines
--- toolchain/toolchain-external/Config.in | 7 +++---- toolchain/toolchain-external/toolchain-external.mk | 4 ++-- 2 files changed, 5 insertions(+), 6 deletions(-)toolchain/toolchain-external/Config.in +3
-4@@ -7,13 +7,12 @@ comment "(e)glibc toolchains only available with shared lib support" depends on BR2_PREFER_STATIC_LIB config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM - bool "Linaro ARM 2014.02" + bool "Linaro ARM 2014.05" depends on BR2_arm depends on BR2_GCC_TARGET_ARCH = "armv7-a" depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on BR2_ARM_EABIHF depends on !BR2_PREFER_STATIC_LIB - select BR2_TOOLCHAIN_HAS_GCC_BUG_58854 # toolchain generated before fix backport select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP@@ -21,8 +20,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 help Linaro toolchain for the ARM architecture. It uses Linaro - GCC 2014.02 (based on gcc 4.8), Linaro GDB 2013.10 (based on - GDB 7.6), eglibc 2.18, Binutils 2014.02 (based on 2.24). It + GCC 2014.05 (based on gcc 4.9), Linaro GDB 2014.05 (based on + GDB 7.6), eglibc 2.19, Binutils 2014.05 (based on 2.24). It generates code that runs on all Cortex-A profile devices, but tuned for the Cortex-A9. The code generated is Thumb 2, with the hard floating point calling convention, and usestoolchain/toolchain-external/toolchain-external.mk +2
-2@@ -276,8 +276,8 @@ define TOOLCHAIN_EXTERNAL_FIXUP_CMDS rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/ endef else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.8-2014.02_linux.tar.xz +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/ +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/Signature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 6/11 toolchain-external: bump Linaro ARMeb toolchain to 2014.04
In reply to Thomas PetazzoniFor some reason, there is no ARMeb toolchain available in the 2014.05 Linaro release.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 6 +++--- toolchain/toolchain-external/toolchain-external.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-)
toolchain/toolchain-external/Config.in +3 -3
@@ -33,7 +33,7 @@ comment "Linaro toolchains available for Cortex-A + EABIhf" depends on !BR2_PREFER_STATIC_LIB config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB - bool "Linaro armeb 2014.02" + bool "Linaro armeb 2014.04" depends on BR2_armeb depends on BR2_GCC_TARGET_ARCH = "armv7-a" depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
@@ -46,8 +46,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 help Linaro toolchain for the ARM big endian architecture. It - uses Linaro GCC 2014.01 (based on gcc 4.8), Linaro GDB - 2013.10 (based on GDB 7.6), eglibc 2.18, Binutils 2013.11 + uses Linaro GCC 2014.04 (based on gcc 4.8), Linaro GDB + 2014.04 (based on GDB 7.6), eglibc 2.19, Binutils 2014.04 (based on 2.24). It generates code that runs on all Cortex-A profile devices, but tuned for the Cortex-A9. The code generated is Thumb 2, with the hard floating point calling
toolchain/toolchain-external/toolchain-external.mk +2 -2
@@ -280,8 +280,8 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.02_linux.tar.xz +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/ +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/
Signature · 1 line
1.9.3
PATCH 6/11 toolchain-external: bump Linaro ARMeb toolchain to 2014.04
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 4 lines
For some reason, there is no ARMeb toolchain available in the 2014.05 Linaro release.
Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>
Regards,
Yann E. MORIN.
Quoted 51 lines
--- toolchain/toolchain-external/Config.in | 6 +++--- toolchain/toolchain-external/toolchain-external.mk | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-)toolchain/toolchain-external/Config.in +3
-3@@ -33,7 +33,7 @@ comment "Linaro toolchains available for Cortex-A + EABIhf" depends on !BR2_PREFER_STATIC_LIB config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB - bool "Linaro armeb 2014.02" + bool "Linaro armeb 2014.04" depends on BR2_armeb depends on BR2_GCC_TARGET_ARCH = "armv7-a" depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"@@ -46,8 +46,8 @@ config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_1 help Linaro toolchain for the ARM big endian architecture. It - uses Linaro GCC 2014.01 (based on gcc 4.8), Linaro GDB - 2013.10 (based on GDB 7.6), eglibc 2.18, Binutils 2013.11 + uses Linaro GCC 2014.04 (based on gcc 4.8), Linaro GDB + 2014.04 (based on GDB 7.6), eglibc 2.19, Binutils 2014.04 (based on 2.24). It generates code that runs on all Cortex-A profile devices, but tuned for the Cortex-A9. The code generated is Thumb 2, with the hard floating point callingtoolchain/toolchain-external/toolchain-external.mk +2
-2@@ -280,8 +280,8 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.02_linux.tar.xz +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/ +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/Signature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 7/11 toolchain-external: bump Linaro AArch64 toolchain to 2014.05
In reply to Thomas PetazzoniSigned-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 2 +- toolchain/toolchain-external/toolchain-external.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
toolchain/toolchain-external/Config.in +1 -1
@@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 http://wiki.xilinx.com/mb-gnu-tools config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 - bool "Linaro AArch64 14.02" + bool "Linaro AArch64 14.05" depends on BR2_aarch64 depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_PREFER_STATIC_LIB
toolchain/toolchain-external/toolchain-external.mk +2 -2
@@ -351,8 +351,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/ +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/
Signature · 1 line
1.9.3
PATCH 7/11 toolchain-external: bump Linaro AArch64 toolchain to 2014.05
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 1 line
Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>
Regards,
Yann E. MORIN.
Quoted 40 lines
--- toolchain/toolchain-external/Config.in | 2 +- toolchain/toolchain-external/toolchain-external.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)toolchain/toolchain-external/Config.in +1
-1@@ -782,7 +782,7 @@ config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 http://wiki.xilinx.com/mb-gnu-tools config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 - bool "Linaro AArch64 14.02" + bool "Linaro AArch64 14.05" depends on BR2_aarch64 depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_PREFER_STATIC_LIBtoolchain/toolchain-external/toolchain-external.mk +2
-2@@ -351,8 +351,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = microblaze-unknown-linux-gnu.tgz else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y) -TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.02/components/toolchain/binaries/ -TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.8-2014.02_linux.tar.xz +TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/binaries/ +TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/Signature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 8/11 toolchain-external: bump musl external toolchains to 1.1.1
In reply to Thomas PetazzoniAnd while we're at it, factorize the definition of the musl version, since it's common to the definition of the tarball names for the various supported architectures.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 2 +- toolchain/toolchain-external/toolchain-external.mk | 23 +++++++++++----------- 2 files changed, 13 insertions(+), 12 deletions(-)
toolchain/toolchain-external/Config.in +1 -1
@@ -804,7 +804,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS select BR2_TOOLCHAIN_EXTERNAL_MUSL select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 help Toolchain based on the Musl C library, provided by the musl-cross project. It uses gcc 4.8.2, binutils 2.24 and
toolchain/toolchain-external/toolchain-external.mk +12 -11
@@ -355,31 +355,32 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) -TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/ +TOOLCHAIN_EXTERNAL_VERSION = 1.1.1 +TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)/ ifeq ($(BR2_arm),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_armeb),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_i386),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_microblazebe),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_mips),y) ifeq ($(BR2_SOFT_FLOAT),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif # BR2_SOFT_FLOAT else ifeq ($(BR2_mipsel),y) ifeq ($(BR2_SOFT_FLOAT),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif # BR2_SOFT_FLOAT else ifeq ($(BR2_powerpc),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_x86_64),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif else # Custom toolchain
Signature · 1 line
1.9.3
PATCH 8/11 toolchain-external: bump musl external toolchains to 1.1.1
Hi Thomas,
Quoted 28 lines · Thomas Petazzoni
And while we're at it, factorize the definition of the musl version, since it's common to the definition of the tarball names for the various supported architectures.
Signed-off-by Thomas Petazzoni <[email protected]>--- toolchain/toolchain-external/Config.in | 2 +- toolchain/toolchain-external/toolchain-external.mk | 23 +++++++++++----------- 2 files changed, 13 insertions(+), 12 deletions(-)toolchain/toolchain-external/Config.in +1
-1@@ -804,7 +804,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS select BR2_TOOLCHAIN_EXTERNAL_MUSL select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 help Toolchain based on the Musl C library, provided by the musl-cross project. It uses gcc 4.8.2, binutils 2.24 andtoolchain/toolchain-external/toolchain-external.mk +0
-0
toolchain/toolchain-external/toolchain-external.mk TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/ · line 358
Quoted 5 lines
toolchain/toolchain-external/toolchain-external.mk +1
-1@@ -355,31 +355,32 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) -TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/ +TOOLCHAIN_EXTERNAL_VERSION = 1.1.1
This name sounds too generic. Other external toolchains are unlikely to use the same version string. Maybe MUSL_TOOLCHAIN_EXTERNAL_VERSION?
baruch
Quoted 45 lines
toolchain/toolchain-external/toolchain-external.mk +11
-10+TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION)/ ifeq ($(BR2_arm),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_armeb),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_i386),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_microblazebe),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_mips),y) ifeq ($(BR2_SOFT_FLOAT),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif # BR2_SOFT_FLOAT else ifeq ($(BR2_mipsel),y) ifeq ($(BR2_SOFT_FLOAT),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif # BR2_SOFT_FLOAT else ifeq ($(BR2_powerpc),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz else ifeq ($(BR2_x86_64),y) -TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-1.0.0.tar.xz +TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz endif else # Custom toolchainSignature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 3 lines
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -PATCH 8/11 toolchain-external: bump musl external toolchains to 1.1.1
Dear Baruch Siach,
Quoted 5 lines · Baruch Siach
Quoted 5 lines
toolchain/toolchain-external/toolchain-external.mk +0
-0@@ -355,31 +355,32 @@ TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/
Quoted 8 lines
toolchain/toolchain-external/toolchain-external.mk TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.05/components/toolchain/ · line 358
Quoted 5 lines
toolchain/toolchain-external/toolchain-external.mk +1
-1TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.05_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) -TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-1.0.0/ +TOOLCHAIN_EXTERNAL_VERSION = 1.1.1This name sounds too generic. Other external toolchains are unlikely to use the same version string. Maybe
MUSL_TOOLCHAIN_EXTERNAL_VERSION?
I believe it's OK: other toolchains could also define TOOLCHAIN_EXTERNAL_VERSION (I'm actually thinking of sending patches to do this). It's exactly like the choice between gcc versions in the gcc
package: we assign a different GCC_VERSION value in each case. That's the same thing here: we have the choice between multiple toolchains and toolchain versions, so it makes sense to have TOOLCHAIN_EXTERNAL_VERSION defined to whatever the version of the currently selected toolchain is.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 8/11 toolchain-external: bump musl external toolchains to 1.1.1
In reply to Thomas PetazzoniQuoted 17 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
And while we're at it, factorize the definition of the musl version, since it's common to the definition of the tarball names for the various supported architectures.
Signed-off-by Thomas Petazzoni <[email protected]>--- toolchain/toolchain-external/Config.in | 2 +- toolchain/toolchain-external/toolchain-external.mk | 23 +++++++++++----------- 2 files changed, 13 insertions(+), 12 deletions(-)toolchain/toolchain-external/Config.in +0
-0
toolchain/toolchain-external/Config.in config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS · line 810
Quoted 8 lines
toolchain/toolchain-external/Config.in +1
-1@@ -804,7 +804,7 @@ config BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS select BR2_TOOLCHAIN_EXTERNAL_MUSL select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 help Toolchain based on the Musl C library, provided by the musl-cross project. It uses gcc 4.8.2, binutils 2.24 and
This is no longer valid. Committed with this fixed up, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 9/11 toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09
In reply to Thomas PetazzoniSigned-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 40 +++++++++++----------- toolchain/toolchain-external/toolchain-external.mk | 6 ++-- 2 files changed, 23 insertions(+), 23 deletions(-)
toolchain/toolchain-external/Config.in +20 -20
@@ -190,8 +190,8 @@ config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109 This toolchain uses software-floating point. -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 - bool "Sourcery CodeBench MIPS 2013.11" +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405 + bool "Sourcery CodeBench MIPS 2014.05" depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_MIPS_NABI32
@@ -200,12 +200,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13 help Sourcery CodeBench toolchain for the MIPS architecture, from - Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc - 2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers - 3.11. It has support for the following variants: + Mentor Graphics. It uses gcc 4.8.3, binutils 2.24.51, glibc + 2.18, uClibc 0.9.30 and gdb 7.7.50, kernel headers + 3.13. It has support for the following variants: - MIPS32 O32 big endian glibc Select a MIPS generic core Disable BR2_SOFT_FLOAT
@@ -259,8 +259,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 - MIPS32 little endian soft float uclibc Not usable in Buildroot yet. -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 - bool "Sourcery CodeBench MIPS 2013.05" +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 + bool "Sourcery CodeBench MIPS 2013.11" depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_MIPS_NABI32
@@ -269,12 +269,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11 help Sourcery CodeBench toolchain for the MIPS architecture, from - Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc - 2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers - 3.8.2. It has support for the following variants: + Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc + 2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers + 3.11. It has support for the following variants: - MIPS32 O32 big endian glibc Select a MIPS generic core Disable BR2_SOFT_FLOAT
@@ -328,9 +328,9 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 - MIPS32 little endian soft float uclibc Not usable in Buildroot yet. -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209 - bool "Sourcery CodeBench MIPS 2012.09" - depends on BR2_mips || BR2_mipsel +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 + bool "Sourcery CodeBench MIPS 2013.05" + depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_MIPS_NABI32 depends on !BR2_PREFER_STATIC_LIB
@@ -338,12 +338,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209 select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8 help Sourcery CodeBench toolchain for the MIPS architecture, from - Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51, glibc - 2.16, uClibc 0.9.30 and gdb 7.4.50, kernel headers - 3.5.4. It has support for the following variants: + Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc + 2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers + 3.8.2. It has support for the following variants: - MIPS32 O32 big endian glibc Select a MIPS generic core Disable BR2_SOFT_FLOAT
@@ -877,9 +877,9 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2 default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3 default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 - default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209 default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 + default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405 default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103
toolchain/toolchain-external/toolchain-external.mk +3 -3
@@ -283,15 +283,15 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y) -TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ -TOOLCHAIN_EXTERNAL_SOURCE = mips-2012.09-99-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.05-66-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.11-36-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y) +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2
Signature · 1 line
1.9.3
PATCH 9/11 toolchain-external: add CodeSourcery MIPS 2014.05, remove 2012.09
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 1 line
Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>
Sometimes, git-diff is too smart. It detects multiple small adds/removes instead of one big remove and one big add. More complex to review... :-/
Regards,
Yann E. MORIN.
Quoted 136 lines
--- toolchain/toolchain-external/Config.in | 40 +++++++++++----------- toolchain/toolchain-external/toolchain-external.mk | 6 ++-- 2 files changed, 23 insertions(+), 23 deletions(-)toolchain/toolchain-external/Config.in +20
-20@@ -190,8 +190,8 @@ config BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109 This toolchain uses software-floating point. -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 - bool "Sourcery CodeBench MIPS 2013.11" +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405 + bool "Sourcery CodeBench MIPS 2014.05" depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_MIPS_NABI32@@ -200,12 +200,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_13 help Sourcery CodeBench toolchain for the MIPS architecture, from - Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc - 2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers - 3.11. It has support for the following variants: + Mentor Graphics. It uses gcc 4.8.3, binutils 2.24.51, glibc + 2.18, uClibc 0.9.30 and gdb 7.7.50, kernel headers + 3.13. It has support for the following variants: - MIPS32 O32 big endian glibc Select a MIPS generic core Disable BR2_SOFT_FLOAT@@ -259,8 +259,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 - MIPS32 little endian soft float uclibc Not usable in Buildroot yet. -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 - bool "Sourcery CodeBench MIPS 2013.05" +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 + bool "Sourcery CodeBench MIPS 2013.11" depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_MIPS_NABI32@@ -269,12 +269,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_11 help Sourcery CodeBench toolchain for the MIPS architecture, from - Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc - 2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers - 3.8.2. It has support for the following variants: + Mentor Graphics. It uses gcc 4.8.1, binutils 2.23.52, glibc + 2.18, uClibc 0.9.30 and gdb 7.6.50, kernel headers + 3.11. It has support for the following variants: - MIPS32 O32 big endian glibc Select a MIPS generic core Disable BR2_SOFT_FLOAT@@ -328,9 +328,9 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 - MIPS32 little endian soft float uclibc Not usable in Buildroot yet. -config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209 - bool "Sourcery CodeBench MIPS 2012.09" - depends on BR2_mips || BR2_mipsel +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 + bool "Sourcery CodeBench MIPS 2013.05" + depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" depends on !BR2_MIPS_NABI32 depends on !BR2_PREFER_STATIC_LIB@@ -338,12 +338,12 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209 select BR2_TOOLCHAIN_HAS_NATIVE_RPC select BR2_INSTALL_LIBSTDCPP select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_8 help Sourcery CodeBench toolchain for the MIPS architecture, from - Mentor Graphics. It uses gcc 4.7.2, binutils 2.23.51, glibc - 2.16, uClibc 0.9.30 and gdb 7.4.50, kernel headers - 3.5.4. It has support for the following variants: + Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc + 2.17, uClibc 0.9.30 and gdb 7.4.50, kernel headers + 3.8.2. It has support for the following variants: - MIPS32 O32 big endian glibc Select a MIPS generic core Disable BR2_SOFT_FLOAT@@ -877,9 +877,9 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "microblazeel-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2 default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_14_3 default "microblaze-unknown-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2 - default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209 default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305 default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311 + default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405 default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103toolchain/toolchain-external/toolchain-external.mk +3
-3@@ -283,15 +283,15 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.04/components/toolchain/binaries/ TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.8-2014.04_linux.tar.xz TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201209),y) -TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ -TOOLCHAIN_EXTERNAL_SOURCE = mips-2012.09-99-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201305),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.05-66-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.11-36-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y) +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2Signature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 10/11 toolchain-external: add CodeSourcery PowerPC 2012.03
In reply to Thomas PetazzoniHowever, this toolchain is only usable for e500v2 with the SPE ABI.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 19 +++++++++++++++++++ toolchain/toolchain-external/toolchain-external.mk | 3 +++ 2 files changed, 22 insertions(+)
toolchain/toolchain-external/Config.in +19 -0
@@ -416,6 +416,24 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0. +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203 + bool "Sourcery CodeBench PowerPC 2012.03" + depends on BR2_powerpc + depends on BR2_powerpc_SPE + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" + depends on !BR2_PREFER_STATIC_LIB + select BR2_TOOLCHAIN_EXTERNAL_GLIBC + select BR2_TOOLCHAIN_HAS_NATIVE_RPC + select BR2_INSTALL_LIBSTDCPP + select BR2_HOSTARCH_NEEDS_IA32_LIBS + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 + help + Sourcery CodeBench toolchain for the PowerPC architecture, + from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53, + glibc 2.15, gdb 7.2.50 and kernel headers 3.2.10. It has + support for the following variants: + - e500v2 glibc, SPE, 32 bits + config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 bool "Sourcery CodeBench PowerPC 2011.03" depends on BR2_powerpc
@@ -883,6 +901,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 + default "powerpc-mentor-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
toolchain/toolchain-external/toolchain-external.mk +3 -0
@@ -302,6 +302,9 @@ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y) +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
Signature · 1 line
1.9.3
PATCH 10/11 toolchain-external: add CodeSourcery PowerPC 2012.03
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 1 line
However, this toolchain is only usable for e500v2 with the SPE ABI.
However, this toolchain is not available...
Quoted 48 lines
Signed-off-by Thomas Petazzoni <[email protected]>--- toolchain/toolchain-external/Config.in | 19 +++++++++++++++++++ toolchain/toolchain-external/toolchain-external.mk | 3 +++ 2 files changed, 22 insertions(+)toolchain/toolchain-external/Config.in +19
-0@@ -416,6 +416,24 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0. +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203 + bool "Sourcery CodeBench PowerPC 2012.03" + depends on BR2_powerpc + depends on BR2_powerpc_SPE + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" + depends on !BR2_PREFER_STATIC_LIB + select BR2_TOOLCHAIN_EXTERNAL_GLIBC + select BR2_TOOLCHAIN_HAS_NATIVE_RPC + select BR2_INSTALL_LIBSTDCPP + select BR2_HOSTARCH_NEEDS_IA32_LIBS + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 + help + Sourcery CodeBench toolchain for the PowerPC architecture, + from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53, + glibc 2.15, gdb 7.2.50 and kernel headers 3.2.10. It has + support for the following variants: + - e500v2 glibc, SPE, 32 bits + config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 bool "Sourcery CodeBench PowerPC 2011.03" depends on BR2_powerpc@@ -883,6 +901,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 + default "powerpc-mentor-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209toolchain/toolchain-external/toolchain-external.mk +0
-0
toolchain/toolchain-external/toolchain-external.mk TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux · line 307
Quoted 6 lines
toolchain/toolchain-external/toolchain-external.mk +3
-0@@ -302,6 +302,9 @@ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y) +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2
wget "${TOOLCHAIN_EXTERNAL_SITE}${TOOLCHAIN_EXTERNAL_SOURCE}"
--> 404
Regards,
Yann E. MORIN.
Quoted 10 lines
toolchain/toolchain-external/toolchain-external.mk +0
-0else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2Signature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'
PATCH 10/11 toolchain-external: add CodeSourcery PowerPC 2012.03
Dear Yann E. MORIN,
Quoted 6 lines · Yann E. MORIN
toolchain/toolchain-external/toolchain-external.mk TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux · line 307
Quoted 3 lines
toolchain/toolchain-external/toolchain-external.mk +3
-0+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y) +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2wget "${TOOLCHAIN_EXTERNAL_SITE}${TOOLCHAIN_EXTERNAL_SOURCE}"
--> 404
TOOLCHAIN_EXTERNAL_SITE should have been
http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu/.
I didn't detect the problem because I had already the toolchain downloaded in my $(DL_DIR). I'll fix that!
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 10/11 toolchain-external: add CodeSourcery PowerPC 2012.03
In reply to Thomas PetazzoniThomas, All
Quoted 50 lines · Thomas Petazzoni
However, this toolchain is only usable for e500v2 with the SPE ABI.
Signed-off-by Thomas Petazzoni <[email protected]>--- toolchain/toolchain-external/Config.in | 19 +++++++++++++++++++ toolchain/toolchain-external/toolchain-external.mk | 3 +++ 2 files changed, 22 insertions(+)toolchain/toolchain-external/Config.in +19
-0@@ -416,6 +416,24 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 from Mentor Graphics. It uses gcc 4.7.3, binutils 2.23.52, glibc 2.17, gdb 7.4.50 and kernel headers 3.7.0. +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203 + bool "Sourcery CodeBench PowerPC 2012.03" + depends on BR2_powerpc + depends on BR2_powerpc_SPE + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" + depends on !BR2_PREFER_STATIC_LIB + select BR2_TOOLCHAIN_EXTERNAL_GLIBC + select BR2_TOOLCHAIN_HAS_NATIVE_RPC + select BR2_INSTALL_LIBSTDCPP + select BR2_HOSTARCH_NEEDS_IA32_LIBS + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_2 + help + Sourcery CodeBench toolchain for the PowerPC architecture, + from Mentor Graphics. It uses gcc 4.6.3, binutils 2.21.53, + glibc 2.15, gdb 7.2.50 and kernel headers 3.2.10. It has + support for the following variants: + - e500v2 glibc, SPE, 32 bits + config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 bool "Sourcery CodeBench PowerPC 2011.03" depends on BR2_powerpc@@ -883,6 +901,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "nios2-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 + default "powerpc-mentor-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209toolchain/toolchain-external/toolchain-external.mk +0
-0
toolchain/toolchain-external/toolchain-external.mk TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux · line 306
Quoted 5 lines
toolchain/toolchain-external/toolchain-external.mk +2
-0@@ -302,6 +302,9 @@ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y) +TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu/
With the website changed to
http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu/
as you noted, this can receive this:
Tested-by Ryan Barnett <[email protected]>
Quoted 4 lines
toolchain/toolchain-external/toolchain-external.mk +1
-0+TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y) TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
PATCH 11/11 toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1
In reply to Thomas PetazzoniThis commit adds support for two ADI Blackfin toolchains: the 'stable' 2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc 4.5.
Signed-off-by Thomas Petazzoni <[email protected]>
--- toolchain/toolchain-external/Config.in | 40 ++++++++++++++++------ toolchain/toolchain-external/toolchain-external.mk | 14 +++++--- 2 files changed, 39 insertions(+), 15 deletions(-)
toolchain/toolchain-external/Config.in +30 -10
@@ -689,8 +689,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 Other architecture variants (beyond Pentium-4/Xeon) are supported as well, but glibc is not optimised for it. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 - bool "Blackfin.uclinux.org 2013R1" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 + bool "Blackfin.uclinux.org 2014R1 (gcc 4.5.x stable)" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
@@ -707,8 +707,8 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 - bool "Blackfin.uclinux.org 2012R2-RC2" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 + bool "Blackfin.uclinux.org 2014R1 (gcc 4.3.x stable)" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
@@ -720,13 +720,13 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 select BR2_TOOLCHAIN_HAS_THREADS select BR2_TOOLCHAIN_HAS_THREADS_DEBUG select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 help Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 - bool "Blackfin.uclinux.org 2012R1-RC2" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 + bool "Blackfin.uclinux.org 2013R1" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
@@ -738,7 +738,25 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 select BR2_TOOLCHAIN_HAS_THREADS select BR2_TOOLCHAIN_HAS_THREADS_DEBUG select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 + help + Toolchain for the Blackfin architecture, from + http://blackfin.uclinux.org. + +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 + bool "Blackfin.uclinux.org 2012R2-RC2" + depends on BR2_bfin + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" + select BR2_TOOLCHAIN_EXTERNAL_UCLIBC + select BR2_INSTALL_LIBSTDCPP + select BR2_LARGEFILE + select BR2_INET_IPV6 + select BR2_TOOLCHAIN_HAS_NATIVE_RPC + select BR2_USE_WCHAR + select BR2_TOOLCHAIN_HAS_THREADS + select BR2_TOOLCHAIN_HAS_THREADS_DEBUG + select BR2_HOSTARCH_NEEDS_IA32_LIBS + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5 help Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org.
@@ -910,12 +928,14 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209 - default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT - default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC + default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FLAT + default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FDPIC + default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FLAT + default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FDPIC default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm default "armeb-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb default "i486-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386
toolchain/toolchain-external/toolchain-external.mk +9 -5
@@ -329,10 +329,6 @@ TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y) TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y) -TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/projects/adi-toolchain/files/2012R1-BF60X/2012R1-RC2-BF60X/i386/ -TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R1-RC2.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2012R1-RC2.i386.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2012R2/2012R2-RC2/i386/ TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R2-RC2.i386.tar.bz2
@@ -341,6 +337,14 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386/ TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43),y) +TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386/ +TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2 +TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y) +TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1_45-RC2/i386/ +TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1_45-RC2.i386.tar.bz2 +TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1_45-RC2.i386.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblazeel-unknown-linux-gnu_14.3_early.tar.xz
@@ -403,7 +407,7 @@ TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES -ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y) +ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y) # Special handling for Blackfin toolchain, because of the split in two # tarballs, and the organization of tarball contents. The tarballs # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
Signature · 1 line
1.9.3
PATCH 11/11 toolchain-external: add ADI Blackfin 2014R1 toolchain, remove 2012R1
Thomas, All,
On 2014-06-01 12:47 +0200, Thomas Petazzoni spake thusly:
Quoted 5 lines
This commit adds support for two ADI Blackfin toolchains: the 'stable' 2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc 4.5.
Signed-off-by Thomas Petazzoni <[email protected]>
Reviewed-by "Yann E. MORIN" <[email protected]>
The URLs work! ;-)
Regards,
Yann E. MORIN.
Quoted 138 lines
--- toolchain/toolchain-external/Config.in | 40 ++++++++++++++++------ toolchain/toolchain-external/toolchain-external.mk | 14 +++++--- 2 files changed, 39 insertions(+), 15 deletions(-)toolchain/toolchain-external/Config.in +30
-10@@ -689,8 +689,8 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 Other architecture variants (beyond Pentium-4/Xeon) are supported as well, but glibc is not optimised for it. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 - bool "Blackfin.uclinux.org 2013R1" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 + bool "Blackfin.uclinux.org 2014R1 (gcc 4.5.x stable)" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC@@ -707,8 +707,8 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 - bool "Blackfin.uclinux.org 2012R2-RC2" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 + bool "Blackfin.uclinux.org 2014R1 (gcc 4.3.x stable)" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC@@ -720,13 +720,13 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 select BR2_TOOLCHAIN_HAS_THREADS select BR2_TOOLCHAIN_HAS_THREADS_DEBUG select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 help Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 - bool "Blackfin.uclinux.org 2012R1-RC2" +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 + bool "Blackfin.uclinux.org 2013R1" depends on BR2_bfin depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" select BR2_TOOLCHAIN_EXTERNAL_UCLIBC@@ -738,7 +738,25 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 select BR2_TOOLCHAIN_HAS_THREADS select BR2_TOOLCHAIN_HAS_THREADS_DEBUG select BR2_HOSTARCH_NEEDS_IA32_LIBS - select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_3 + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10 + help + Toolchain for the Blackfin architecture, from + http://blackfin.uclinux.org. + +config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 + bool "Blackfin.uclinux.org 2012R2-RC2" + depends on BR2_bfin + depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" + select BR2_TOOLCHAIN_EXTERNAL_UCLIBC + select BR2_INSTALL_LIBSTDCPP + select BR2_LARGEFILE + select BR2_INET_IPV6 + select BR2_TOOLCHAIN_HAS_NATIVE_RPC + select BR2_USE_WCHAR + select BR2_TOOLCHAIN_HAS_THREADS + select BR2_TOOLCHAIN_HAS_THREADS_DEBUG + select BR2_HOSTARCH_NEEDS_IA32_LIBS + select BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_5 help Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org.@@ -910,12 +928,14 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209 - default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT - default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1 && BR2_BINFMT_FDPIC + default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FLAT + default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43 && BR2_BINFMT_FDPIC + default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FLAT + default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45 && BR2_BINFMT_FDPIC default "arm-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_arm default "armeb-linux-musleabi" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_armeb default "i486-linux-musl" if BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS && BR2_i386toolchain/toolchain-external/toolchain-external.mk +9
-5@@ -329,10 +329,6 @@ TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y) TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y) -TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/projects/adi-toolchain/files/2012R1-BF60X/2012R1-RC2-BF60X/i386/ -TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R1-RC2.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2012R1-RC2.i386.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2012R2/2012R2-RC2/i386/ TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R2-RC2.i386.tar.bz2@@ -341,6 +337,14 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y) TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386/ TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2 TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43),y) +TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386/ +TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2 +TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y) +TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1_45-RC2/i386/ +TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1_45-RC2.i386.tar.bz2 +TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1_45-RC2.i386.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3),y) TOOLCHAIN_EXTERNAL_SITE = http://sources.buildroot.net/ TOOLCHAIN_EXTERNAL_SOURCE = lin32-microblazeel-unknown-linux-gnu_14.3_early.tar.xz@@ -403,7 +407,7 @@ TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES -ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y) +ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC43)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1_GCC45),y) # Special handling for Blackfin toolchain, because of the split in two # tarballs, and the organization of tarball contents. The tarballs # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,Signature · 6 lines
1.9.3 _______________________________________________ buildroot mailing list buildroot at busybox.net http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------'