ARM: i.MX: Remove Freescale i.MX27 IP Camera board support

PATCH New Alexander Shiyan 2 participants 2 messages Jun 18, 2014 – Jun 20, 2014

Subsystems (3)

Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape

lore

Share & tools

lore

Alexander Shiyan

author

2014-06-18 17:26 UTC #0 lore raw

PATCH 1/1 ARM: i.MX: Remove Freescale i.MX27 IP Camera board support

The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree.

Signed-off-by Alexander Shiyan <[email protected]>

---
 arch/arm/mach-imx/Kconfig           |  9 -----
 arch/arm/mach-imx/Makefile          |  1 -
 arch/arm/mach-imx/mach-imx27ipcam.c | 77 -------------------------------------
 3 files changed, 87 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-imx27ipcam.c

arch/arm/mach-imx/Kconfig +0 -9

index b50d15b..edaed78 100644
@@ -394,15 +394,6 @@ config MACH_MXT_TD60
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
-config MACH_IMX27IPCAM
-	bool "IMX27 IPCAM platform"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select SOC_IMX27
-	help
-	  Include support for IMX27 IPCAM platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_IMX27_DT
 	bool "Support i.MX27 platforms from device tree"
 	select SOC_IMX27

arch/arm/mach-imx/Makefile +0 -1

index 2c8ca00..a364e20 100644
@@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
-obj-$(CONFIG_MACH_IMX27IPCAM) += mach-imx27ipcam.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
 
 # i.MX31 based machines

arch/arm/mach-imx/mach-imx27ipcam.c deleted +0 ~~-77~~

77 lines not on this page · raw message

Signature · 1 line

1.8.5.5

Shawn Guo

Applied

2014-06-20 12:38 UTC #1 lore raw

PATCH 1/1 ARM: i.MX: Remove Freescale i.MX27 IP Camera board support

Quoted 11 lines · Alexander Shiyan

The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree.
Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/mach-imx/Kconfig           |  9 -----
 arch/arm/mach-imx/Makefile          |  1 -
 arch/arm/mach-imx/mach-imx27ipcam.c | 77 -------------------------------------
 3 files changed, 87 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-imx27ipcam.c

Applied, and dropped the board support from imx_v4_v5_defconfig as well.

Shawn