Skip to contentSkip to conversation

mpc8313: ids8313 board updates

PATCH New Heiko Schocher 3 participants 6 messages Jun 22, 2014 – Jun 23, 2014 Library code

lore
Share & tools
lore
#0 lore raw

v7 cover mpc8313: ids8313 board updates

- add CONFIG_SYS_GENERIC_BOARD to the ids8313 board, therefore fdtdec_get_int() is moved out of lib/fdtdec.c as lib/fdtdec.c is only compiled if CONFIG_OF_CONTROL is defined, but defining this for the ids8313 board leads in conjunction with CONFIG_SYS_GENERIC_BOARD in booting error:

No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>

So move the common used function fdtdec_get_int() out of lib/fdtdec.c into lib/fdtdec_common.c

Cc Simon Glass <[email protected]>
Cc Kim Phillips <[email protected]>
Cc Wolfgang Denk <[email protected]>
Cc Tom Rini <[email protected]>
Cc Michael Conrad <[email protected]>

Heiko Schocher (2):
lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c
mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board

 include/configs/ids8313.h |  3 ++-
 lib/Makefile              |  2 ++
 lib/fdtdec.c              | 36 ------------------------------------
 lib/fdtdec_common.c       | 38 ++++++++++++++++++++++++++++++++++++++
 tools/Makefile            |  1 +
 5 files changed, 43 insertions(+), 37 deletions(-)
 create mode 100644 lib/fdtdec_common.c
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH v7 1/2 lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c

move fdtdec_get_int() out of lib/fdtdec.c into lib/fdtdec_common.c as this function is also used, if CONFIG_OF_CONTROL is not used. Poped up on the ids8313 board using signed FIT images, and activating CONFIG_SYS_GENERIC_BOARD. Without this patch it shows on boot:

No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>

With this patch, it boots again with CONFIG_SYS_GENERIC_BOARD enabled.

---
- changes for v2:
- remove fdtdec_get_int() in lib/fdtdec.c
- only one fdtdec_get_int() implementation
Tested on the ids8313 board (on host and target side)
- changes for v3:
use fdt_getprop() instead fdt_getprop_w() so we avoid a cast as Simon suggested.
- changes for v4:
none
- changes for v5:
- keep debug for non host side as Simon Glass suggested.
- add Acked-by from Simon Glass
- changes for v6
- rebased against commit d8a97f934c64a7ba6f11da5e4cc7f3be57fcb82d
- compile fdtdec_common.c only if CONFIG_OF_CONTROL or CONFIG_FIT is enabled, to prevent link errors when using old compilers on sparc, blackfin and nds32 architectures, as Tom Rini suggested
- changes for v7:
- do not use "#ifdef" in lib/Makefile, as duplicates get filtered out.
- rebased against 39b6d07fd7e692736cdb05a000b1c84ab43de4fb

 lib/Makefile        |  2 ++
 lib/fdtdec.c        | 36 ------------------------------------
 lib/fdtdec_common.c | 38 ++++++++++++++++++++++++++++++++++++++
 tools/Makefile      |  1 +
 4 files changed, 41 insertions(+), 36 deletions(-)
 create mode 100644 lib/fdtdec_common.c
lib/Makefile +2 -0
index 377ab13..68210a5 100644
@@ -23,6 +23,8 @@ obj-$(CONFIG_USB_TTY) += circbuf.o
 obj-y += crc7.o
 obj-y += crc8.o
 obj-y += crc16.o
+obj-$(CONFIG_FIT) += fdtdec_common.o
+obj-$(CONFIG_OF_CONTROL) += fdtdec_common.o
 obj-$(CONFIG_OF_CONTROL) += fdtdec.o
 obj-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
 obj-$(CONFIG_GZIP) += gunzip.o
lib/fdtdec.c +0 -36
index 13d3d2f..aaa6620 100644
@@ -111,24 +111,6 @@ fdt_addr_t fdtdec_get_addr(const void *blob, int node,
 	return fdtdec_get_addr_size(blob, node, prop_name, NULL);
 }
 
-s32 fdtdec_get_int(const void *blob, int node, const char *prop_name,
-		s32 default_val)
-{
-	const s32 *cell;
-	int len;
-
-	debug("%s: %s: ", __func__, prop_name);
-	cell = fdt_getprop(blob, node, prop_name, &len);
-	if (cell && len >= sizeof(s32)) {
-		s32 val = fdt32_to_cpu(cell[0]);
-
-		debug("%#x (%d)\n", val, val);
-		return val;
-	}
-	debug("(not found)\n");
-	return default_val;
-}
-
 uint64_t fdtdec_get_uint64(const void *blob, int node, const char *prop_name,
 		uint64_t default_val)
 {
@@ -648,22 +630,4 @@ int fdtdec_read_fmap_entry(const void *blob, int node, const char *name,
 
 	return 0;
 }
-#else
-#include "libfdt.h"
-#include "fdt_support.h"
-
-int fdtdec_get_int(const void *blob, int node, const char *prop_name,
-		int default_val)
-{
-	const int *cell;
-	int len;
-
-	cell = fdt_getprop_w((void *)blob, node, prop_name, &len);
-	if (cell && len >= sizeof(int)) {
-		int val = fdt32_to_cpu(cell[0]);
-
-		return val;
-	}
-	return default_val;
-}
 #endif
lib/fdtdec_common.c new file +38 -0
new file mode 100644
index 0000000..757931a
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2014
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * Based on lib/fdtdec.c:
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef USE_HOSTCC
+#include <common.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+#else
+#include "libfdt.h"
+#include "fdt_support.h"
+
+#define debug(...)
+#endif
+
+int fdtdec_get_int(const void *blob, int node, const char *prop_name,
+		int default_val)
+{
+	const int *cell;
+	int len;
+
+	debug("%s: %s: ", __func__, prop_name);
+	cell = fdt_getprop(blob, node, prop_name, &len);
+	if (cell && len >= sizeof(int)) {
+		int val = fdt32_to_cpu(cell[0]);
+
+		debug("%#x (%d)\n", val, val);
+		return val;
+	}
+	debug("(not found)\n");
+	return default_val;
+}
tools/Makefile +1 -0
index 3a1180f..61b2048 100644
@@ -69,6 +69,7 @@ dumpimage-mkimage-objs := aisimage.o \
 			common/bootm.o \
 			lib/crc32.o \
 			default_image.o \
+			lib/fdtdec_common.o \
 			lib/fdtdec.o \
 			fit_common.o \
 			fit_image.o \
Signature · 1 line
1.8.3.1
#2 lore raw

PATCH v7 1/2 lib, fdt: move fdtdec_get_int() out of lib/fdtdec.c

Quoted 6 lines · Heiko Schocher

move fdtdec_get_int() out of lib/fdtdec.c into lib/fdtdec_common.c as this function is also used, if CONFIG_OF_CONTROL is not used. Poped up on the ids8313 board using signed FIT images, and activating CONFIG_SYS_GENERIC_BOARD. Without this patch it shows on boot:

Quoted 8 lines

No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED. For sandbox, use -d <file.dtb>

With this patch, it boots again with CONFIG_SYS_GENERIC_BOARD enabled.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140623/669df26d/attachment.pgp>
#3 lore raw

PATCH v7 2/2 mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board

In reply to Heiko Schocher

- add CONFIG_SYS_GENERIC_BOARD
- remove CONFIG_OF_CONTROL to boot again

---
- changes for v2:
- added acked-by from Kim
- changes for v3:
none
- changes for v4:
none
- changes for v5:
none
- changes for v6:
none
- changes for v7:
none

 include/configs/ids8313.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/ids8313.h +2 -1
index 1de5750..3e55247 100644
@@ -19,6 +19,8 @@
 #define CONFIG_MPC8313
 #define CONFIG_IDS8313
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_FSL_ELBC
 
 #define CONFIG_MISC_INIT_R
@@ -582,6 +584,5 @@
 #define CONFIG_RSA
 #define CONFIG_SHA1
 #define CONFIG_SHA256
-#define CONFIG_OF_CONTROL
 
 #endif	/* __CONFIG_H */
Signature · 1 line
1.8.3.1
#5 lore raw

PATCH v7 2/2 mpc8313: add CONFIG_SYS_GENERIC_BOARD to ids8313 board

In reply to Heiko Schocher
Quoted 6 lines · Heiko Schocher

- add CONFIG_SYS_GENERIC_BOARD
- remove CONFIG_OF_CONTROL to boot again

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140623/4b9f34cd/attachment.pgp>