mpt3sas: MPI2.5 Rev G (2.5.2) specifications
Subsystems (2)
PATCH RESEND 1/8 mpt3sas: MPI2.5 Rev G (2.5.2) specifications
Below is the change set in MPI2.5 Rev G specification and 2.00.31 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
3) Added Allow Protection Information bit for IR Volume Create.
Signed-off-by Sreekanth Reddy <[email protected]>
--- drivers/scsi/mpt3sas/mpi/mpi2.h | 6 ++++-- drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 8 ++++++-- drivers/scsi/mpt3sas/mpi/mpi2_init.h | 6 ++++-- drivers/scsi/mpt3sas/mpi/mpi2_raid.h | 6 +++++- 4 files changed, 19 insertions(+), 7 deletions(-)
drivers/scsi/mpt3sas/mpi/mpi2.h +4 -2
@@ -8,7 +8,7 @@* scatter/gather formats. * Creation Date: June 21, 2006 * -* mpi2.h Version: 02.00.29 +* mpi2.h Version: 02.00.31 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used
@@ -86,6 +86,8 @@* 11-27-12 02.00.28 Bumped MPI2_HEADER_VERSION_UNIT. * 12-20-12 02.00.29 Bumped MPI2_HEADER_VERSION_UNIT. * Added MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET. +* 04-09-13 02.00.30 Bumped MPI2_HEADER_VERSION_UNIT. +* 04-17-13 02.00.31 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */
@@ -119,7 +121,7 @@#define MPI2_VERSION_02_05 (0x0205)/*Unit and Dev versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x1D) +#define MPI2_HEADER_VERSION_UNIT (0x1F)#define MPI2_HEADER_VERSION_DEV (0x00)#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +6 -2
@@ -6,7 +6,7 @@* Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * -* mpi2_cnfg.h Version: 02.00.24 +* mpi2_cnfg.h Version: 02.00.25 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used
@@ -160,6 +160,9 @@* 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as * obsolete for MPI v2.5 and later. * Added some defines for 12G SAS speeds. +* 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK. +* Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to +* match the specification. * -------------------------------------------------------------------------- */
@@ -792,6 +795,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)/*IO Unit Page 1 Flags defines */ +#define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)#define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)#define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)#define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
@@ -870,7 +874,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)/*defines for IO Unit Page 5 DmaEngineCapabilities field */ -#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00) +#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
drivers/scsi/mpt3sas/mpi/mpi2_init.h +4 -2
@@ -6,7 +6,7 @@* Title: MPI SCSI initiator mode messages and structures * Creation Date: June 23, 2006 * -* mpi2_init.h Version: 02.00.14 +* mpi2_init.h Version: 02.00.15 * * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25 * prefix are for use only on MPI v2.5 products, and must not be used
@@ -44,6 +44,8 @@* Priority to match SAM-4. * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY. * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION. +* 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY, +* replacing the Reserved4 field. * -------------------------------------------------------------------------- */
@@ -347,7 +349,7 @@ typedef struct _MPI2_SCSI_IO_REPLY {U32 SenseCount;/*0x18 */ U32 ResponseInfo;/*0x1C */ U16 TaskTag;/*0x20 */ -U16 Reserved4;/*0x22 */ +U16 SCSIStatusQualifier;/* 0x22 */ U32 BidirectionalTransferCount;/*0x24 */ U32 EEDPErrorOffset;/*0x28 *//*MPI 2.5 only; Reserved in MPI 2.0*/ U32 Reserved6;/*0x2C */
drivers/scsi/mpt3sas/mpi/mpi2_raid.h +5 -1
@@ -6,7 +6,7 @@* Title: MPI Integrated RAID messages and structures * Creation Date: April 26, 2007 * -* mpi2_raid.h Version: 02.00.09 +* mpi2_raid.h Version: 02.00.10 * * Version History * ---------------
@@ -30,6 +30,7 @@* 02-06-12 02.00.08 Added MPI2_RAID_ACTION_PHYSDISK_HIDDEN. * 07-26-12 02.00.09 Added ElapsedSeconds field to MPI2_RAID_VOL_INDICATOR. * Added MPI2_RAID_VOL_FLAGS_ELAPSED_SECONDS_VALID define. +* 04-17-13 02.00.10 Added MPI25_RAID_ACTION_ADATA_ALLOW_PI. * -------------------------------------------------------------------------- */
@@ -46,6 +47,9 @@* RAID Action messages ****************************************************************************/ +/* ActionDataWord defines for use with MPI2_RAID_ACTION_CREATE_VOLUME action */ +#define MPI25_RAID_ACTION_ADATA_ALLOW_PI (0x80000000) +/*ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */ #define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
Signature · 1 line
1.7.1
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Sreekanth" == Reddy, Sreekanth <[email protected]> writes:
Sreekanth> Below is the change set in MPI2.5 Rev G specification and Sreekanth> 2.00.31 header files
Sreekanth> 1) Added SCSIStatusQualifier to SCSI IO Error Reply message. Sreekanth> 2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags
Sreekanth> field.
Sreekanth> 3) Added Allow Protection Information bit for IR Volume
Sreekanth> Create.
Reviewed-by Martin K. Petersen <[email protected]>
Signature · 1 line
Martin K. Petersen Oracle Linux Engineering