Proposals of deprecation/removal, mainly affecting toolchain

index 1f60f81..77fae7a 100644
@@ -56,6 +56,12 @@ config BR2_aarch64
 config BR2_avr32
 	bool "AVR32"
 	select BR2_SOFT_FLOAT
+	# This architecture is obsolete and complicated to maintain to
+	# do the lack of upstream support in the major toolchain
+	# components. If you're interested by AVR32, contact the
+	# Buildroot community. Otherwise, its support will be removed
+	# in 2014.11.
+	depends on BR2_DEPRECATED_SINCE_2014_08
 	help
 	  The AVR32 is a 32-bit RISC microprocessor architecture designed by
 	  Atmel.

index 08540a3..acb3933 100644
@@ -3,7 +3,7 @@ comment "Binutils Options"
 choice
 	prompt "Binutils Version"
 	depends on !BR2_arc
-	default BR2_BINUTILS_VERSION_2_21 if (BR2_mips || BR2_mipsel || BR2_sh)
+	default BR2_BINUTILS_VERSION_2_21_1 if (BR2_mips || BR2_mipsel || BR2_sh)
 	default BR2_BINUTILS_VERSION_2_24 if BR2_microblaze || BR2_powerpc64le
 	default BR2_BINUTILS_VERSION_2_22
 	help

index a2c7846..024e4c5 100644
@@ -128,6 +128,27 @@ config BR2_PACKAGE_PROCPS
 	help
 	  The procps package has been replaced by the equivalent procps-ng.
 
+config BR2_BINUTILS_VERSION_2_20_1
+	bool "binutils 2.20.1 has been removed"
+	select BR2_LEGACY
+	help
+	  The 2.20.1 version of binutils has been removed. Use a newer
+	  version instead.
+
+config BR2_BINUTILS_VERSION_2_21
+	bool "binutils 2.21 has been removed"
+	select BR2_LEGACY
+	help
+	  The 2.21 version of binutils has been removed. Use a newer
+	  version instead.
+
+config BR2_BINUTILS_VERSION_2_23_1
+	bool "binutils 2.23.1 has been removed"
+	select BR2_LEGACY
+	help
+	  The 2.23.1 version of binutils has been removed. Use a newer
+	  version instead.
+
 ###############################################################################
 comment "Legacy options removed in 2014.05"
 

deleted file mode 100644
index af26329..0000000
@@ -1,24 +0,0 @@
-diff -rdup binutils-2.18.50.0.3.orig/configure binutils-2.18.50.0.3/configure
---- binutils-2.18.50.0.3.orig/configure	2007-11-22 12:41:26.000000000 +0100
-+++ binutils-2.18.50.0.3/configure	2007-11-22 12:45:01.000000000 +0100
-@@ -2245,7 +2245,7 @@ case "${target}" in
-     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
-     libgloss_dir=arm
-     ;;
--  arm*-*-linux-gnueabi)
-+  arm*-*-linux-*gnueabi)
-     noconfigdirs="$noconfigdirs target-qthreads"
-     noconfigdirs="$noconfigdirs target-libobjc"
-     case ${with_newlib} in
-diff -rdup binutils-2.18.50.0.3.orig/configure.ac binutils-2.18.50.0.3/configure.ac
---- binutils-2.18.50.0.3.orig/configure.ac	2007-11-22 12:41:26.000000000 +0100
-+++ binutils-2.18.50.0.3/configure.ac	2007-11-22 12:44:54.000000000 +0100
-@@ -522,7 +522,7 @@ case "${target}" in
-     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
-     libgloss_dir=arm
-     ;;
--  arm*-*-linux-gnueabi)
-+  arm*-*-linux-*gnueabi)
-     noconfigdirs="$noconfigdirs target-qthreads"
-     noconfigdirs="$noconfigdirs target-libobjc"
-     case ${with_newlib} in

42 lines not on this page · raw message

deleted file mode 100644
index 5cb0f61..0000000
@@ -1,24 +0,0 @@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.am binutils-2.17.50.0.17/ld/Makefile.am
---- binutils-2.17.50.0.17.oorig/ld/Makefile.am	2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.am	2007-06-25 10:00:36.000000000 +0200
-@@ -18,7 +18,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- 
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.in binutils-2.17.50.0.17/ld/Makefile.in
---- binutils-2.17.50.0.17.oorig/ld/Makefile.in	2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.in	2007-06-25 10:00:36.000000000 +0200
-@@ -287,7 +287,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include

deleted file mode 100644
index 6e80921..0000000
@@ -1,21 +0,0 @@
-diff -u binutils-2.17.50.0.17.oorig/ld/emultempl/elf32.em binutils-2.17.50.0.17/ld/emultempl/elf32.em
---- binutils-2.17.50.0.17.oorig/ld/emultempl/elf32.em	2007-06-18 19:31:40.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/emultempl/elf32.em	2007-06-25 10:01:25.000000000 +0200
-@@ -1007,6 +1007,8 @@
- 	      && command_line.rpath == NULL)
- 	    {
- 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
-+	      if ((lib_path) && (strlen (lib_path) == 0))
-+		  lib_path = NULL;
- 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- 						      force))
- 		break;
-@@ -1191,6 +1193,8 @@
-   rpath = command_line.rpath;
-   if (rpath == NULL)
-     rpath = (const char *) getenv ("LD_RUN_PATH");
-+  if ((rpath) && (strlen (rpath) == 0))
-+      rpath = NULL;
-   if (! (bfd_elf_size_dynamic_sections
- 	 (output_bfd, command_line.soname, rpath,
- 	  command_line.filter_shlib,

183 lines not on this page · raw message

deleted file mode 100644
index d21e4cb..0000000
@@ -1,36 +0,0 @@
-Signed-off-by: Sven Rebhan <[email protected]>
-
-Always try to prepend the sysroot prefix to absolute filenames first.
-
-http://bugs.gentoo.org/275666
-http://sourceware.org/bugzilla/show_bug.cgi?id=10340
-
---- a/ld/ldfile.c
-+++ b/ld/ldfile.c
-@@ -308,18 +308,24 @@
-      directory first.  */
-   if (! entry->is_archive)
-     {
--      if (entry->sysrooted && IS_ABSOLUTE_PATH (entry->filename))
-+      /* For absolute pathnames, try to always open the file in the
-+	 sysroot first. If this fails, try to open the file at the
-+	 given location. */
-+      entry->sysrooted = is_sysrooted_pathname(entry->filename, FALSE);
-+      if (IS_ABSOLUTE_PATH (entry->filename) && ld_sysroot && ! entry->sysrooted)
- 	{
- 	  char *name = concat (ld_sysroot, entry->filename,
- 			       (const char *) NULL);
- 	  if (ldfile_try_open_bfd (name, entry))
- 	    {
- 	      entry->filename = name;
-+	      entry->sysrooted = TRUE;
- 	      return TRUE;
- 	    }
- 	  free (name);
- 	}
--      else if (ldfile_try_open_bfd (entry->filename, entry))
-+
-+      if (ldfile_try_open_bfd (entry->filename, entry))
- 	{
- 	  entry->sysrooted = IS_ABSOLUTE_PATH (entry->filename)
- 	    && is_sysrooted_pathname (entry->filename, TRUE);

deleted file mode 100644
index af26329..0000000
@@ -1,24 +0,0 @@
-diff -rdup binutils-2.18.50.0.3.orig/configure binutils-2.18.50.0.3/configure
---- binutils-2.18.50.0.3.orig/configure	2007-11-22 12:41:26.000000000 +0100
-+++ binutils-2.18.50.0.3/configure	2007-11-22 12:45:01.000000000 +0100
-@@ -2245,7 +2245,7 @@ case "${target}" in
-     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
-     libgloss_dir=arm
-     ;;
--  arm*-*-linux-gnueabi)
-+  arm*-*-linux-*gnueabi)
-     noconfigdirs="$noconfigdirs target-qthreads"
-     noconfigdirs="$noconfigdirs target-libobjc"
-     case ${with_newlib} in
-diff -rdup binutils-2.18.50.0.3.orig/configure.ac binutils-2.18.50.0.3/configure.ac
---- binutils-2.18.50.0.3.orig/configure.ac	2007-11-22 12:41:26.000000000 +0100
-+++ binutils-2.18.50.0.3/configure.ac	2007-11-22 12:44:54.000000000 +0100
-@@ -522,7 +522,7 @@ case "${target}" in
-     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
-     libgloss_dir=arm
-     ;;
--  arm*-*-linux-gnueabi)
-+  arm*-*-linux-*gnueabi)
-     noconfigdirs="$noconfigdirs target-qthreads"
-     noconfigdirs="$noconfigdirs target-libobjc"
-     case ${with_newlib} in

42 lines not on this page · raw message

deleted file mode 100644
index 5cb0f61..0000000
@@ -1,24 +0,0 @@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.am binutils-2.17.50.0.17/ld/Makefile.am
---- binutils-2.17.50.0.17.oorig/ld/Makefile.am	2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.am	2007-06-25 10:00:36.000000000 +0200
-@@ -18,7 +18,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- 
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.in binutils-2.17.50.0.17/ld/Makefile.in
---- binutils-2.17.50.0.17.oorig/ld/Makefile.in	2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.in	2007-06-25 10:00:36.000000000 +0200
-@@ -287,7 +287,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include

deleted file mode 100644
index df78310..0000000
@@ -1,21 +0,0 @@
-diff -Nura binutils-2.21.orig/ld/emultempl/elf32.em binutils-2.21/ld/emultempl/elf32.em
---- binutils-2.21.orig/ld/emultempl/elf32.em	2010-10-29 09:10:36.000000000 -0300
-+++ binutils-2.21/ld/emultempl/elf32.em	2010-12-10 09:26:56.746102724 -0300
-@@ -1270,6 +1270,8 @@
- 	      && command_line.rpath == NULL)
- 	    {
- 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
-+	      if ((lib_path) && (strlen (lib_path) == 0))
-+	      	lib_path = NULL;
- 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- 						      force))
- 		break;
-@@ -1497,6 +1499,8 @@
-   rpath = command_line.rpath;
-   if (rpath == NULL)
-     rpath = (const char *) getenv ("LD_RUN_PATH");
-+  if ((rpath) && (strlen (rpath) == 0))
-+  	rpath = NULL;
- 
-   for (abfd = link_info.input_bfds; abfd; abfd = abfd->link_next)
-     if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)

deleted file mode 100644
index d21e4cb..0000000
@@ -1,36 +0,0 @@
-Signed-off-by: Sven Rebhan <[email protected]>
-
-Always try to prepend the sysroot prefix to absolute filenames first.
-
-http://bugs.gentoo.org/275666
-http://sourceware.org/bugzilla/show_bug.cgi?id=10340
-
---- a/ld/ldfile.c
-+++ b/ld/ldfile.c
-@@ -308,18 +308,24 @@
-      directory first.  */
-   if (! entry->is_archive)
-     {
--      if (entry->sysrooted && IS_ABSOLUTE_PATH (entry->filename))
-+      /* For absolute pathnames, try to always open the file in the
-+	 sysroot first. If this fails, try to open the file at the
-+	 given location. */
-+      entry->sysrooted = is_sysrooted_pathname(entry->filename, FALSE);
-+      if (IS_ABSOLUTE_PATH (entry->filename) && ld_sysroot && ! entry->sysrooted)
- 	{
- 	  char *name = concat (ld_sysroot, entry->filename,
- 			       (const char *) NULL);
- 	  if (ldfile_try_open_bfd (name, entry))
- 	    {
- 	      entry->filename = name;
-+	      entry->sysrooted = TRUE;
- 	      return TRUE;
- 	    }
- 	  free (name);
- 	}
--      else if (ldfile_try_open_bfd (entry->filename, entry))
-+
-+      if (ldfile_try_open_bfd (entry->filename, entry))
- 	{
- 	  entry->sysrooted = IS_ABSOLUTE_PATH (entry->filename)
- 	    && is_sysrooted_pathname (entry->filename, TRUE);

deleted file mode 100644
index ea3d1b6..0000000
@@ -1,29 +0,0 @@
-r10231 | lethal | 2005-05-02 09:58:00 -0400 (Mon, 02 May 2005) | 13 lines
-
-Likewise, binutils has no idea about any of these new targets either, so we 
-fix that up too.. now we're able to actually build a real toolchain for 
-sh2a_nofpu- and other more ineptly named toolchains (and yes, there are more 
-inept targets than that one, really. Go look, I promise).
-
---- a/configure
-+++ b/configure
-@@ -1495,7 +1495,7 @@
-   mips*-*-*)
-     noconfigdirs="$noconfigdirs gprof"
-     ;;
--  sh-*-* | sh64-*-*)
-+  sh*-*-* | sh64-*-*)
-     case "${target}" in
-       sh*-*-elf)
-          ;;
---- a/configure.ac
-+++ b/configure.ac
-@@ -712,7 +712,7 @@
-   mips*-*-*)
-     noconfigdirs="$noconfigdirs gprof"
-     ;;
--  sh-*-* | sh64-*-*)
-+  sh*-*-* | sh64-*-*)
-     case "${target}" in
-       sh*-*-elf)
-          ;;

deleted file mode 100644
index 5cb0f61..0000000
@@ -1,24 +0,0 @@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.am binutils-2.17.50.0.17/ld/Makefile.am
---- binutils-2.17.50.0.17.oorig/ld/Makefile.am	2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.am	2007-06-25 10:00:36.000000000 +0200
-@@ -18,7 +18,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- 
- EMUL = @EMUL@
- EMULATION_OFILES = @EMULATION_OFILES@
-diff -u binutils-2.17.50.0.17.oorig/ld/Makefile.in binutils-2.17.50.0.17/ld/Makefile.in
---- binutils-2.17.50.0.17.oorig/ld/Makefile.in	2007-06-18 19:29:29.000000000 +0200
-+++ binutils-2.17.50.0.17/ld/Makefile.in	2007-06-25 10:00:36.000000000 +0200
-@@ -287,7 +287,7 @@
- # We put the scripts in the directory $(scriptdir)/ldscripts.
- # We can't put the scripts in $(datadir) because the SEARCH_DIR
- # directives need to be different for native and cross linkers.
--scriptdir = $(tooldir)/lib
-+scriptdir = $(libdir)
- BASEDIR = $(srcdir)/..
- BFDDIR = $(BASEDIR)/bfd
- INCDIR = $(BASEDIR)/include

deleted file mode 100644
index df78310..0000000
@@ -1,21 +0,0 @@
-diff -Nura binutils-2.21.orig/ld/emultempl/elf32.em binutils-2.21/ld/emultempl/elf32.em
---- binutils-2.21.orig/ld/emultempl/elf32.em	2010-10-29 09:10:36.000000000 -0300
-+++ binutils-2.21/ld/emultempl/elf32.em	2010-12-10 09:26:56.746102724 -0300
-@@ -1270,6 +1270,8 @@
- 	      && command_line.rpath == NULL)
- 	    {
- 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
-+	      if ((lib_path) && (strlen (lib_path) == 0))
-+	      	lib_path = NULL;
- 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
- 						      force))
- 		break;
-@@ -1497,6 +1499,8 @@
-   rpath = command_line.rpath;
-   if (rpath == NULL)
-     rpath = (const char *) getenv ("LD_RUN_PATH");
-+  if ((rpath) && (strlen (rpath) == 0))
-+  	rpath = NULL;
- 
-   for (abfd = link_info.input_bfds; abfd; abfd = abfd->link_next)
-     if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)

deleted file mode 100644
index e49c795..0000000
@@ -1,37 +0,0 @@
-Signed-off-by: Sven Rebhan <[email protected]>
-
-Always try to prepend the sysroot prefix to absolute filenames first.
-
-http://bugs.gentoo.org/275666
-http://sourceware.org/bugzilla/show_bug.cgi?id=10340
-
---- a/ld/ldfile.c
-+++ b/ld/ldfile.c
-@@ -308,18 +308,25 @@
-      directory first.  */
-   if (! entry->flags.maybe_archive)
-     {
--      if (entry->flags.sysrooted && IS_ABSOLUTE_PATH (entry->filename))
-+      /* For absolute pathnames, try to always open the file in the
-+	 sysroot first. If this fails, try to open the file at the
-+	 given location.  */
-+      entry->flags.sysrooted = is_sysrooted_pathname (entry->filename);
-+      if (!entry->flags.sysrooted && IS_ABSOLUTE_PATH (entry->filename)
-+	  && ld_sysroot)
- 	{
- 	  char *name = concat (ld_sysroot, entry->filename,
- 			       (const char *) NULL);
- 	  if (ldfile_try_open_bfd (name, entry))
- 	    {
- 	      entry->filename = name;
-+	      entry->flags.sysrooted = TRUE;
- 	      return TRUE;
- 	    }
- 	  free (name);
- 	}
--      else if (ldfile_try_open_bfd (entry->filename, entry))
-+
-+      if (ldfile_try_open_bfd (entry->filename, entry))
- 	return TRUE;
- 
-       if (IS_ABSOLUTE_PATH (entry->filename))

846 lines not on this page · raw message

51 lines not on this page · raw message

133 lines not on this page · raw message

index acb3933..08f7d58 100644
@@ -13,16 +13,6 @@ choice
 		depends on BR2_avr32
 		bool "binutils 2.18-avr32-1.0.1"
 
-	config BR2_BINUTILS_VERSION_2_20_1
-		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
-		depends on !BR2_ARM_EABIHF
-		bool "binutils 2.20.1"
-
-	config BR2_BINUTILS_VERSION_2_21
-		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
-		depends on !BR2_ARM_EABIHF
-		bool "binutils 2.21"
-
 	config BR2_BINUTILS_VERSION_2_21_1
 		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
 		depends on !BR2_ARM_EABIHF

@@ -32,10 +22,6 @@ choice
 		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
 		bool "binutils 2.22"
 
-	config BR2_BINUTILS_VERSION_2_23_1
-		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
-		bool "binutils 2.23.1"
-
 	config BR2_BINUTILS_VERSION_2_23_2
 		depends on !BR2_avr32 && !BR2_aarch64 && !BR2_microblaze && !BR2_powerpc64le
 		bool "binutils 2.23.2"

index 024e4c5..dea7907 100644
@@ -149,6 +149,13 @@ config BR2_BINUTILS_VERSION_2_23_1
 	  The 2.23.1 version of binutils has been removed. Use a newer
 	  version instead.
 
+config BR2_UCLIBC_VERSION_0_9_32
+	bool "uclibc 0.9.32 has been removed"
+	select BR2_LEGACY
+	help
+	  The 0.9.32 version of uClibc has been removed. Use a newer
+	  version instead.
+
 ###############################################################################
 comment "Legacy options removed in 2014.05"
 

deleted file mode 100644
index 1908925..0000000
@@ -1,34 +0,0 @@
->From 49f58308779cb0b798f5e7bc902bbc515c1ec394 Mon Sep 17 00:00:00 2001
-From: Jason Woodward <[email protected]>
-Date: Sat, 11 Jun 2011 22:00:59 -0400
-Subject: [PATCH] Fix e500 __fe_nomask_env use of __set_errno w/o CFLAGS-libm
-
-Since the new _LIBC guard in 96c9a8f7d00cdf6bb7968a2390b9d87da8a45e2d we need
-to use CFLAGS-libm (-DNOT_IN_libc -DIS_IN_libm) or we end up with linker
-errors like:
-
-  lib/libm.a(fe_nomask.os): In function `__fe_nomask_env':
-  fe_nomask.c:(.text+0x26): undefined reference to `__libc_errno'
-  collect2: ld returned 1 exit status
-
-Signed-off-by: Jason Woodward <[email protected]>
----
- libm/powerpc/e500/fpu/Makefile.arch |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/libm/powerpc/e500/fpu/Makefile.arch b/libm/powerpc/e500/fpu/Makefile.arch
-index 904561e..a64843f 100644
---- a/libm/powerpc/e500/fpu/Makefile.arch
-+++ b/libm/powerpc/e500/fpu/Makefile.arch
-@@ -11,6 +11,8 @@ libm_ARCH_SRC:=$(wildcard $(libm_ARCH_fpu_DIR)/*.c)
- libm_ARCH_OBJ:=$(patsubst $(libm_ARCH_fpu_DIR)/%.c,$(libm_ARCH_fpu_OUT)/%.o,$(libm_ARCH_SRC))
- endif
- 
-+CFLAGS-fe_nomask.c := $(CFLAGS-libm)
-+
- libm_ARCH_OBJS:=$(libm_ARCH_OBJ)
- 
- ifeq ($(DOPIC),y)
--- 
-1.7.0.4
-

43 lines not on this page · raw message

392 lines not on this page · raw message

deleted file mode 100644
index 44d06cb..0000000
@@ -1,11 +0,0 @@
---- uClibc-0.9.32.ori/libc/sysdeps/linux/sparc/pipe.S	2011-06-08 21:35:20.000000000 +0200
-+++ uClibc-0.9.32/libc/sysdeps/linux/sparc/pipe.S	2011-11-11 15:57:25.000000000 +0100
-@@ -52,7 +52,7 @@
- 	 restore %g0,%g0,%o0
- 
- .Lerror:
--	call	HIDDEN_JUMPTARGET(__errno_location)
-+	call	__errno_location
- 	 or	%g0,EINVAL,%i0
- 	st	%i0,[%o0]
- 	ret

82 lines not on this page · raw message

68 lines not on this page · raw message

163 lines not on this page · raw message

155 lines not on this page · raw message

index 84c2f14..0b72050 100644
@@ -12,10 +12,6 @@ choice
 		bool "uClibc 0.9.31.x"
 		depends on BR2_avr32
 
-	config BR2_UCLIBC_VERSION_0_9_32
-		bool "uClibc 0.9.32.x"
-		depends on !(BR2_arc || BR2_avr32 || BR2_sh || BR2_xtensa)
-
 	config BR2_UCLIBC_VERSION_0_9_33
 		bool "uClibc 0.9.33.x"
 		depends on !(BR2_arc || BR2_avr32 || BR2_xtensa)

@@ -40,7 +36,6 @@ config BR2_USE_UCLIBC_SNAPSHOT
 config BR2_UCLIBC_VERSION_STRING
 	string
 	default 0.9.31.1	if BR2_UCLIBC_VERSION_0_9_31
-	default 0.9.32.1	if BR2_UCLIBC_VERSION_0_9_32
 	default 0.9.33.2	if BR2_UCLIBC_VERSION_0_9_33
 	default "8af9dc8f714d20a68df034f6ed1ededc2d752f5b" if BR2_arc
 	default "7bf35c8b7d4a1f97174eb49f47f33946b282114c" if BR2_UCLIBC_VERSION_XTENSA_GIT

@@ -49,7 +44,6 @@ config BR2_UCLIBC_VERSION_STRING
 config BR2_UCLIBC_CONFIG
 	string "uClibc configuration file to use?"
 	default "package/uclibc/uClibc-0.9.31.config" if BR2_UCLIBC_VERSION_0_9_31
-	default "package/uclibc/uClibc-0.9.32.config" if BR2_UCLIBC_VERSION_0_9_32
 	default "package/uclibc/uClibc-0.9.33.config" if BR2_UCLIBC_VERSION_0_9_33
 	default "package/uclibc/uClibc-snapshot.config" if BR2_arc
 	default "package/uclibc/uClibc-snapshot.config" if BR2_UCLIBC_VERSION_SNAPSHOT

268 lines not on this page · raw message

index a6933b6..51e5fb7 100644
@@ -5,8 +5,7 @@ config BR2_PACKAGE_AICCU
 	depends on BR2_TOOLCHAIN_HAS_THREADS
 	depends on BR2_USE_MMU # fork()
 	# Uses dn_skipname(), only available since 0.9.33
-	depends on !BR2_UCLIBC_VERSION_0_9_31 && \
-		!BR2_UCLIBC_VERSION_0_9_32
+	depends on !BR2_UCLIBC_VERSION_0_9_31
 	# AVR32 only has uClibc 0.9.31, so there's no way it can build
 	# due to the lack of dn_skipname(), even with external
 	# toolchains.

index 7160905..a42de17 100644
@@ -4,7 +4,6 @@ config BR2_PACKAGE_CONNMAN
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_IPTABLES
 	depends on !BR2_avr32 # no inotify_init1
-	depends on !BR2_UCLIBC_VERSION_0_9_32
 	depends on BR2_USE_WCHAR # libglib2
 	depends on BR2_INET_IPV6
 	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus, libglib2

@@ -67,5 +66,4 @@ endif # BR2_PACKAGE_CONNMAN
 
 comment "connman needs a toolchain w/ IPv6, wchar, threads, resolver"
 	depends on BR2_USE_MMU && !BR2_avr32
-	depends on BR2_UCLIBC_VERSION_0_9_32 || \
-		!BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
+	depends on !BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS

index 3f0599d..6c1b6cb 100644
@@ -7,11 +7,10 @@ config BR2_PACKAGE_FIO
 	# release of uClibc, but is part of uClibc Git, and backported
 	# in Buildroot patch set of uClibc 0.9.33. Therefore, we
 	# disable the build of fio for external uClibc toolchains
-	# (which use an unknown uClibc version) and for 0.9.31 and
-	# 0.9.32 which don't have posix_madvise().
+	# (which use an unknown uClibc version) and for 0.9.31 which
+	# don't have posix_madvise().
 	depends on !BR2_TOOLCHAIN_EXTERNAL_UCLIBC && \
-		!BR2_UCLIBC_VERSION_0_9_31 && \
-		!BR2_UCLIBC_VERSION_0_9_32
+		!BR2_UCLIBC_VERSION_0_9_31
 	# fio uses fallocate() which becomes fallocate64() while compiling
 	# with BR2_LARGEFILE but fallocate64() is not available on nios2
 	depends on !BR2_nios2

index e7bb3d9..456fddf 100644
@@ -4,8 +4,7 @@ config BR2_PACKAGE_IPUTILS
 	depends on BR2_USE_MMU # fork()
 	# requires dn_comp (only available in since uclibc 0.9.33)
 	depends on !BR2_avr32
-	depends on !BR2_UCLIBC_VERSION_0_9_31 && \
-		!BR2_UCLIBC_VERSION_0_9_32
+	depends on !BR2_UCLIBC_VERSION_0_9_31
 	help
 	  This package is set of small useful utilities for Linux networking.
 	  It includes complete versions of ping, traceroute, etc.

index 8df7c55..122c6c9 100644
@@ -50,7 +50,7 @@ LIBGLIB2_CONF_ENV = \
 		gt_cv_c_wchar_t=$(if $(BR2_USE_WCHAR),yes,no)
 
 # old uClibc versions don't provide qsort_r
-ifeq ($(BR2_UCLIBC_VERSION_0_9_31)$(BR2_UCLIBC_VERSION_0_9_32)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)$(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2)$(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
+ifeq ($(BR2_UCLIBC_VERSION_0_9_31)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)$(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_V2)$(BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEBE_V2),y)
 LIBGLIB2_CONF_ENV += glib_cv_have_qsort_r=no
 else
 LIBGLIB2_CONF_ENV += glib_cv_have_qsort_r=yes

index 1bf7ad1..856263b 100644
@@ -7,7 +7,6 @@ menuconfig BR2_PACKAGE_MPD
 	# avr32, sparc & CS powerpc gcc are too old
 	depends on !(BR2_avr32 || BR2_sparc)
 	depends on !(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 || BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009)
-	depends on !BR2_UCLIBC_VERSION_0_9_32 # lacks signalfd
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
 	select BR2_PACKAGE_MPD_TREMOR if !(BR2_PACKAGE_MPD_MAD || BR2_PACKAGE_MPD_MPG123 || BR2_PACKAGE_MPD_VORBIS || BR2_PACKAGE_MPD_WAVPACK || BR2_PACKAGE_MPD_FLAC || BR2_PACKAGE_MPD_MUSEPACK || BR2_PACKAGE_MPD_FFMPEG)

index 7e5ad90..4e529d6 100644
@@ -1,7 +1,7 @@
 config BR2_PACKAGE_MTR
 	bool "mtr"
 	# res_mkquery() only available in 0.9.33+
-	depends on !BR2_UCLIBC_VERSION_0_9_31 && !BR2_UCLIBC_VERSION_0_9_32
+	depends on !BR2_UCLIBC_VERSION_0_9_31
 	depends on !BR2_avr32
 	help
 	  mtr combines the functionality of the 'traceroute' and 'ping'

index 0b72050..cda6e0b 100644
@@ -188,25 +188,6 @@ config BR2_UCLIBC_TARGET_ARCH
 	default i386	   if BR2_i386
 	default x86_64	   if BR2_x86_64
 
-# This is only useful for uClibc <= 0.9.32. It can be removed once
-# Buildroot will support only uClibc >= 0.9.33 on ARM.
-config BR2_UCLIBC_ARM_TYPE
-	string
-	depends on BR2_UCLIBC_TARGET_ARCH = "arm"
-	default GENERIC_ARM	if BR2_fa526
-	default ARM920T		if BR2_arm920t
-	default ARM922T		if BR2_arm922t
-	default ARM926T		if BR2_arm926t
-	default ARM10T		if BR2_arm10t
-	default ARM1136JF_S	if BR2_arm1136jf_s
-	default ARM1176JZ_S	if BR2_arm1176jz_s
-	default ARM1176JZF_S	if BR2_arm1176jzf_s
-	default ARM_SA1100	if BR2_strongarm
-	default ARM_XSCALE	if BR2_xscale
-	default ARM_IWMMXT	if BR2_iwmmxt
-	default ARM_CORTEXA8	if BR2_cortex_a8
-	default ARM_CORTEXA9	if BR2_cortex_a9
-
 config BR2_UCLIBC_ARM_BX
 	bool
 	depends on BR2_UCLIBC_TARGET_ARCH = "arm"

index 8337bb6..3b9c8ac 100644
@@ -67,14 +67,6 @@ endef
 #
 
 ifeq ($(UCLIBC_TARGET_ARCH),arm)
-UCLIBC_ARM_TYPE = CONFIG_$(call qstrip,$(BR2_UCLIBC_ARM_TYPE))
-
-define UCLIBC_ARM_TYPE_CONFIG
-	$(SED) 's/^\(CONFIG_[^_]*[_]*ARM[^=]*\)=.*/# \1 is not set/g' \
-		$(@D)/.config
-	$(call UCLIBC_OPT_SET,$(UCLIBC_ARM_TYPE),y,$(@D))
-endef
-
 define UCLIBC_ARM_ABI_CONFIG
 	$(SED) '/CONFIG_ARM_.ABI/d' $(@D)/.config
 	$(call UCLIBC_OPT_SET,CONFIG_ARM_EABI,y,$(@D))

@@ -425,7 +417,6 @@ define UCLIBC_SETUP_DOT_CONFIG
 	$(call UCLIBC_OPT_SET,DEVEL_PREFIX,"/usr",$(@D))
 	$(call UCLIBC_OPT_SET,SHARED_LIB_LOADER_PREFIX,"/lib",$(@D))
 	$(UCLIBC_MMU_CONFIG)
-	$(UCLIBC_ARM_TYPE_CONFIG)
 	$(UCLIBC_ARM_ABI_CONFIG)
 	$(UCLIBC_ARM_BX_CONFIG)
 	$(UCLIBC_MIPS_ABI_CONFIG)

index dea7907..1c5a45f 100644
@@ -156,6 +156,20 @@ config BR2_UCLIBC_VERSION_0_9_32
 	  The 0.9.32 version of uClibc has been removed. Use a newer
 	  version instead.
 
+config BR2_GCC_VERSION_4_3_X
+	bool "gcc 4.3.x has been removed"
+	select BR2_LEGACY
+	help
+	  The 4.3.x version of gcc has been removed. Use a newer
+	  version instead.
+
+config BR2_GCC_VERSION_4_6_X
+	bool "gcc 4.6.x has been removed"
+	select BR2_LEGACY
+	help
+	  The 4.6.x version of gcc has been removed. Use a newer
+	  version instead.
+
 ###############################################################################
 comment "Legacy options removed in 2014.05"
 

deleted file mode 100644
index 6bad179..0000000
@@ -1,13 +0,0 @@
---- gcc/gcc/config/--- gcc/contrib/regression/objs-gcc.sh
-+++ gcc/contrib/regression/objs-gcc.sh
-@@ -105,6 +105,10 @@
-  then
-   make all-gdb all-dejagnu all-ld || exit 1
-   make install-gdb install-dejagnu install-ld || exit 1
-+elif [ $H_REAL_TARGET = $H_REAL_HOST -a $H_REAL_TARGET = i686-pc-linux-uclibc ]
-+ then
-+  make all-gdb all-dejagnu all-ld || exit 1
-+  make install-gdb install-dejagnu install-ld || exit 1
- elif [ $H_REAL_TARGET = $H_REAL_HOST ] ; then
-   make bootstrap || exit 1
-   make install || exit 1

deleted file mode 100644
index c04dd9f..0000000
@@ -1,13 +0,0 @@
-diff -rdup gcc-4.2.1.oorig/gcc/config.gcc gcc-4.2.1/gcc/config.gcc
---- gcc-4.2.1.oorig/gcc/config.gcc	2007-10-01 11:52:52.000000000 +0200
-+++ gcc-4.2.1/gcc/config.gcc	2007-10-01 13:22:12.000000000 +0200
-@@ -494,6 +494,9 @@ case ${target} in
-     alpha*)
-       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
-       ;;
-+    i[34567]86-*hurd*-*)
-+      tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/gnu.h gnu.h ${tm_file}"
-+      ;;
-     i[34567]86-*-*)
-       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
-       ;;

deleted file mode 100644
index 0e2092f..0000000
@@ -1,11 +0,0 @@
---- gcc-4.0.0/boehm-gc/include/gc.h-orig	2005-04-28 22:28:57.000000000 -0500
-+++ gcc-4.0.0/boehm-gc/include/gc.h	2005-04-28 22:30:38.000000000 -0500
-@@ -500,7 +500,7 @@
- #ifdef __linux__
- # include <features.h>
- # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \
--     && !defined(__ia64__)
-+     && !defined(__ia64__) && !defined(__UCLIBC__)
- #   ifndef GC_HAVE_BUILTIN_BACKTRACE
- #     define GC_HAVE_BUILTIN_BACKTRACE
- #   endif

deleted file mode 100644
index ba51a0e..0000000
@@ -1,13 +0,0 @@
-Index: gcc-4.3.0/libstdc++-v3/include/c_global/cstdio
-===================================================================
---- gcc-4.3.0/libstdc++-v3/include/c_global/cstdio	(revision 129202)
-+++ gcc-4.3.0/libstdc++-v3/include/c_global/cstdio	(working copy)
-@@ -144,7 +144,7 @@
- 
- _GLIBCXX_END_NAMESPACE
- 
--#if _GLIBCXX_USE_C99
-+#if _GLIBCXX_USE_C99 || defined __UCLIBC__
- 
- #undef snprintf
- #undef vfscanf

49 lines not on this page · raw message

deleted file mode 100644
index 1639c39..0000000
@@ -1,29 +0,0 @@
-Index: gcc-4.3.0/gcc/config/arm/t-linux
-===================================================================
---- gcc-4.3.0/gcc/config/arm/t-linux	(revision 129896)
-+++ gcc-4.3.0/gcc/config/arm/t-linux	(working copy)
-@@ -3,7 +3,10 @@
- TARGET_LIBGCC2_CFLAGS = -fomit-frame-pointer -fPIC
- 
- LIB1ASMSRC = arm/lib1funcs.asm
--LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx
-+LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx \
-+      _negdf2 _addsubdf3 _muldivdf3 _cmpdf2 _unorddf2 _fixdfsi _fixunsdfsi \
-+      _truncdfsf2 _negsf2 _addsubsf3 _muldivsf3 _cmpsf2 _unordsf2 \
-+      _fixsfsi _fixunssfsi _floatdidf _floatundidf _floatdisf _floatundisf
- 
- # MULTILIB_OPTIONS = mhard-float/msoft-float
- # MULTILIB_DIRNAMES = hard-float soft-float
-Index: gcc-4.3.0/gcc/config/arm/linux-elf.h
-===================================================================
---- gcc-4.3.0/gcc/config/arm/linux-elf.h	(revision 129896)
-+++ gcc-4.3.0/gcc/config/arm/linux-elf.h	(working copy)
-@@ -48,7 +62,7 @@
-    %{shared:-lc} \
-    %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
- 
--#define LIBGCC_SPEC "%{msoft-float:-lfloat} %{mfloat-abi=soft*:-lfloat} -lgcc"
-+#define LIBGCC_SPEC "-lgcc"
- 
- #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
- 

41 lines not on this page · raw message

deleted file mode 100644
index 7fe59d2..0000000
@@ -1,15 +0,0 @@
-\\\\
-\\ gcc PR33200
-Index: gcc-4.3.0/gcc/config.gcc
-===================================================================
---- gcc-4.3.0/gcc/config.gcc	(revision 131628)
-+++ gcc-4.3.0/gcc/config.gcc	(working copy)
-@@ -2302,7 +2305,7 @@ sh-*-symbianelf* | sh[12346l]*-*-symbian
- 	if test x${enable_incomplete_targets} = xyes ; then
- 		tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
- 	fi
--	use_fixproto=yes
-+	# XXX: why? use_fixproto=yes
- 	;;
- sh-*-rtemscoff*)
- 	tmake_file="sh/t-sh t-rtems sh/t-rtems"

deleted file mode 100644
index f4b1c9c..0000000
@@ -1,18 +0,0 @@
-\\\\ followup of PR34205; trying to use aapcs-linux
-\\ gcc/ChangeLog
-\\
-\\ 2008-09-18  Bernhard Reutner-Fischer  <aldot@>
-\\
-\\ * config.gcc (arm*-*-*): Add aapcs-linux to supported ABIs.
-\\
---- gcc-4.3.2.orig/gcc/config.gcc	2008-09-18 20:33:55.000000000 +0200
-+++ gcc-4.3.2/gcc/config.gcc	2008-09-18 21:38:52.000000000 +0200
-@@ -2921,7 +2921,7 @@
- 
- 		case "$with_abi" in
- 		"" \
--		| apcs-gnu | atpcs | aapcs | iwmmxt )
-+		| apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
- 			#OK
- 			;;
- 		*)

86 lines not on this page · raw message

deleted file mode 100644
index dcf01f2..0000000
@@ -1,13 +0,0 @@
-diff -urN gcc-4.3.1.orig/gcc/config/cris/cris.h gcc-4.3.1/gcc/config/cris/cris.h
---- gcc-4.3.1.orig/gcc/config/cris/cris.h	2008-02-22 12:11:01.000000000 +0100
-+++ gcc-4.3.1/gcc/config/cris/cris.h	2008-07-02 10:42:42.000000000 +0200
-@@ -1529,9 +1529,6 @@
- 
- #define NO_IMPLICIT_EXTERN_C
- 
--/* No specific purpose other than warningless compatibility.  */
--#define HANDLE_PRAGMA_PACK_PUSH_POP 1
--
- /*
-  * Local variables:
-  * eval: (c-set-style "gnu")

deleted file mode 100644
index 4e1dc9e..0000000
@@ -1,24 +0,0 @@
-From: Michael Olbrich <[email protected]>
-Subject: Fix: compiler create bad asm codes.
-
-See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=39429 for details.
-
-Signed-off-by: Michael Olbrich <[email protected]>
-
----
- gcc/config/arm/arm.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: b/gcc/config/arm/arm.c
-===================================================================
---- a/gcc/config/arm/arm.c
-+++ b/gcc/config/arm/arm.c
-@@ -6838,7 +6838,7 @@ adjacent_mem_locations (rtx a, rtx b)
-       /* Don't accept any offset that will require multiple
- 	 instructions to handle, since this would cause the
- 	 arith_adjacentmem pattern to output an overlong sequence.  */
--      if (!const_ok_for_op (PLUS, val0) || !const_ok_for_op (PLUS, val1))
-+      if (!const_ok_for_op (val0, PLUS) || !const_ok_for_op (val1, PLUS))
- 	return 0;
- 
-       /* Don't allow an eliminable register: register elimination can make

125 lines not on this page · raw message

deleted file mode 100644
index 6bad179..0000000
@@ -1,13 +0,0 @@
---- gcc/gcc/config/--- gcc/contrib/regression/objs-gcc.sh
-+++ gcc/contrib/regression/objs-gcc.sh
-@@ -105,6 +105,10 @@
-  then
-   make all-gdb all-dejagnu all-ld || exit 1
-   make install-gdb install-dejagnu install-ld || exit 1
-+elif [ $H_REAL_TARGET = $H_REAL_HOST -a $H_REAL_TARGET = i686-pc-linux-uclibc ]
-+ then
-+  make all-gdb all-dejagnu all-ld || exit 1
-+  make install-gdb install-dejagnu install-ld || exit 1
- elif [ $H_REAL_TARGET = $H_REAL_HOST ] ; then
-   make bootstrap || exit 1
-   make install || exit 1

deleted file mode 100644
index 0e2092f..0000000
@@ -1,11 +0,0 @@
---- gcc-4.0.0/boehm-gc/include/gc.h-orig	2005-04-28 22:28:57.000000000 -0500
-+++ gcc-4.0.0/boehm-gc/include/gc.h	2005-04-28 22:30:38.000000000 -0500
-@@ -500,7 +500,7 @@
- #ifdef __linux__
- # include <features.h>
- # if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1 || __GLIBC__ > 2) \
--     && !defined(__ia64__)
-+     && !defined(__ia64__) && !defined(__UCLIBC__)
- #   ifndef GC_HAVE_BUILTIN_BACKTRACE
- #     define GC_HAVE_BUILTIN_BACKTRACE
- #   endif

deleted file mode 100644
index ba51a0e..0000000
@@ -1,13 +0,0 @@
-Index: gcc-4.3.0/libstdc++-v3/include/c_global/cstdio
-===================================================================
---- gcc-4.3.0/libstdc++-v3/include/c_global/cstdio	(revision 129202)
-+++ gcc-4.3.0/libstdc++-v3/include/c_global/cstdio	(working copy)
-@@ -144,7 +144,7 @@
- 
- _GLIBCXX_END_NAMESPACE
- 
--#if _GLIBCXX_USE_C99
-+#if _GLIBCXX_USE_C99 || defined __UCLIBC__
- 
- #undef snprintf
- #undef vfscanf

49 lines not on this page · raw message

deleted file mode 100644
index e6a30a3..0000000
@@ -1,38 +0,0 @@
-[PATCH] add the correct symbols to libgcc for uclibc arm softfloat
-
-Signed-off-by: Peter Korsgaard <[email protected]>
----
- gcc/config/arm/linux-elf.h |    2 +-
- gcc/config/arm/t-linux     |    6 +++++-
- 2 files changed, 6 insertions(+), 2 deletions(-)
-
-Index: gcc-4.4.0/gcc/config/arm/t-linux
-===================================================================
---- gcc-4.4.0.orig/gcc/config/arm/t-linux
-+++ gcc-4.4.0/gcc/config/arm/t-linux
-@@ -4,7 +4,11 @@
- 
- LIB1ASMSRC = arm/lib1funcs.asm
- LIB1ASMFUNCS = _udivsi3 _divsi3 _umodsi3 _modsi3 _dvmd_lnx _clzsi2 _clzdi2 \
--	_arm_addsubdf3 _arm_addsubsf3
-+	_arm_addsubdf3 _arm_addsubsf3 \
-+	_arm_negdf2 _arm_muldivdf3 _arm_cmpdf2 _arm_unorddf2 \
-+	_arm_fixdfsi _arm_fixunsdfsi _arm_truncdfsf2 \
-+	_arm_negsf2 _arm_muldivsf3 _arm_cmpsf2 _arm_unordsf2 \
-+	_arm_fixsfsi _arm_fixunssfsi
- 
- # MULTILIB_OPTIONS = mhard-float/msoft-float
- # MULTILIB_DIRNAMES = hard-float soft-float
-Index: gcc-4.4.0/gcc/config/arm/linux-elf.h
-===================================================================
---- gcc-4.4.0.orig/gcc/config/arm/linux-elf.h
-+++ gcc-4.4.0/gcc/config/arm/linux-elf.h
-@@ -60,7 +60,7 @@
-    %{shared:-lc} \
-    %{!shared:%{profile:-lc_p}%{!profile:-lc}}"
- 
--#define LIBGCC_SPEC "%{msoft-float:-lfloat} %{mfloat-abi=soft*:-lfloat} -lgcc"
-+#define LIBGCC_SPEC "-lgcc"
- 
- #define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
- 

deleted file mode 100644
index 8651afc..0000000
@@ -1,14 +0,0 @@
-http://sourceware.org/ml/crossgcc/2008-05/msg00009.html
-
-diff -Nura gcc-4.5.1.orig/gcc/config/arm/linux-eabi.h gcc-4.5.1/gcc/config/arm/linux-eabi.h
---- gcc-4.5.1.orig/gcc/config/arm/linux-eabi.h	2009-10-30 17:03:09.000000000 -0300
-+++ gcc-4.5.1/gcc/config/arm/linux-eabi.h	2010-11-02 15:38:25.792208500 -0300
-@@ -44,7 +44,7 @@
-    The ARM10TDMI core is the default for armv5t, so set
-    SUBTARGET_CPU_DEFAULT to achieve this.  */
- #undef  SUBTARGET_CPU_DEFAULT
--#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm10tdmi
-+#define SUBTARGET_CPU_DEFAULT TARGET_CPU_arm9tdmi
- 
- /* TARGET_BIG_ENDIAN_DEFAULT is set in
-    config.gcc for big endian configurations.  */

125 lines not on this page · raw message

index fde1b90..8ec587c 100644
@@ -22,13 +22,6 @@ choice
 		depends on BR2_avr32
 		bool "gcc 4.2.2-avr32-2.1.5"
 
-	config BR2_GCC_VERSION_4_3_X
-		depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc && !BR2_avr32 && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_cortex_a5 && !BR2_cortex_a7 && !BR2_cortex_a8 && !BR2_cortex_a9 && !BR2_cortex_a12 && !BR2_cortex_a15 && !BR2_x86_corei7 && !BR2_x86_atom && !BR2_x86_jaguar && !BR2_powerpc_e300c2 && !BR2_powerpc_e300c3 && !BR2_powerpc_e500mc && !BR2_powerpc_464 && !BR2_powerpc_464fp && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4 && !BR2_powerpc64le
-		depends on !BR2_ARM_EABIHF
-		bool "gcc 4.3.x"
-		# musl patches only for gcc 4.7+
-		depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
-
 	config BR2_GCC_VERSION_4_4_X
 		depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc && !BR2_avr32 && !BR2_cortex_a5 && !BR2_cortex_a7 && !BR2_cortex_a12 && !BR2_cortex_a15 && !BR2_x86_corei7 && !BR2_x86_atom && !BR2_x86_jaguar && !BR2_powerpc_476 && !BR2_powerpc_476fp && !BR2_fa526 && !BR2_pj4 && !BR2_powerpc64le
 		bool "gcc 4.4.x"

@@ -48,13 +41,6 @@ choice
 		depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
 		bool "gcc 4.5.x"
 
-	config BR2_GCC_VERSION_4_6_X
-		depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc && !BR2_avr32 && !BR2_bfin && !BR2_cortex_a7 && !BR2_cortex_a12 && !BR2_x86_jaguar && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4 && !BR2_powerpc64le
-		select BR2_GCC_NEEDS_MPC
-		# musl patches only for gcc 4.7+
-		depends on !BR2_TOOLCHAIN_BUILDROOT_MUSL
-		bool "gcc 4.6.x"
-
 	config BR2_GCC_VERSION_4_7_X
 		depends on !BR2_microblaze && !BR2_aarch64 && !BR2_arc && !BR2_avr32 && !BR2_bfin && !BR2_cortex_a12 && !BR2_x86_jaguar && !BR2_sparc_sparchfleon && !BR2_sparc_sparchfleonv8 && !BR2_sparc_sparcsfleon && !BR2_sparc_sparcsfleonv8 && !BR2_pj4 && !BR2_powerpc64le
 		select BR2_GCC_NEEDS_MPC

@@ -107,10 +93,8 @@ config BR2_GCC_SNAP_DATE
 config BR2_GCC_VERSION
 	string
 	default "4.2.2-avr32-2.1.5" if BR2_GCC_VERSION_4_2_2_AVR32_2_1_5
-	default "4.3.6"     if BR2_GCC_VERSION_4_3_X
 	default "4.4.7"     if BR2_GCC_VERSION_4_4_X
 	default "4.5.4"     if BR2_GCC_VERSION_4_5_X
-	default "4.6.4"     if BR2_GCC_VERSION_4_6_X
 	default "4.7.4"     if BR2_GCC_VERSION_4_7_X
 	default "4.8.3"     if BR2_GCC_VERSION_4_8_X
 	default "4.9.0"     if BR2_GCC_VERSION_4_9_X

index 6d01023..82a5509 100644
@@ -217,11 +217,6 @@ endif
 
 ifeq ($(BR2_arm)$(BR2_armeb),y)
 QT_EMB_PLATFORM = arm
-ifeq ($(BR2_GCC_VERSION_4_6_X),y)
-# workaround for gcc issue
-# http://gcc.gnu.org/ml/gcc-patches/2010-11/msg02245.html
-QT_CXXFLAGS += -fno-strict-volatile-bitfields
-endif
 else ifeq ($(BR2_avr32),y)
 QT_EMB_PLATFORM = avr32
 else ifeq ($(BR2_i386),y)

index 1c5a45f..dad359e 100644
@@ -170,6 +170,20 @@ config BR2_GCC_VERSION_4_6_X
 	  The 4.6.x version of gcc has been removed. Use a newer
 	  version instead.
 
+config BR2_GDB_VERSION_7_4
+	bool "gdb 7.4 has been removed"
+	select BR2_LEGACY
+	help
+	  The 7.4 version of gdb has been removed. Use a newer version
+	  instead.
+
+config BR2_GDB_VERSION_7_5
+	bool "gdb 7.5 has been removed"
+	select BR2_LEGACY
+	help
+	  The 7.5 version of gdb has been removed. Use a newer version
+	  instead.
+
 ###############################################################################
 comment "Legacy options removed in 2014.05"
 

@@ -388,7 +402,7 @@ config BR2_KERNEL_HEADERS_3_5
 
 config BR2_GDB_VERSION_7_2
 	bool "gdb 7.2.x is no longer supported"
-	select BR2_GDB_VERSION_7_5
+	select BR2_GDB_VERSION_7_6
 	select BR2_LEGACY
 	help
 	  Version 7.2.x of gdb has been deprecated for more than four

@@ -397,7 +411,7 @@ config BR2_GDB_VERSION_7_2
 
 config BR2_GDB_VERSION_7_3
 	bool "gdb 7.3.x is no longer supported"
-	select BR2_GDB_VERSION_7_5
+	select BR2_GDB_VERSION_7_6
 	select BR2_LEGACY
 	help
 	  Version 7.3.x of gdb has been deprecated for more than four

314 lines not on this page · raw message

42 lines not on this page · raw message

60 lines not on this page · raw message

42 lines not on this page · raw message

60 lines not on this page · raw message

42 lines not on this page · raw message

index d5954f2..cbc1361 100644
@@ -27,14 +27,6 @@ choice
 		depends on BR2_avr32
 		bool "gdb 6.7.1-avr32-2.1.5"
 
-	config BR2_GDB_VERSION_7_4
-		bool "gdb 7.4.x"
-		depends on !BR2_powerpc64le
-
-	config BR2_GDB_VERSION_7_5
-		bool "gdb 7.5.x"
-		depends on !BR2_powerpc64le
-
 	config BR2_GDB_VERSION_7_6
 		bool "gdb 7.6.x"
 		depends on !BR2_powerpc64le

@@ -54,7 +46,5 @@ config BR2_GDB_VERSION
                                    (!BR2_PACKAGE_HOST_GDB && BR2_avr32)
 	default "arc-4.8-R3" if BR2_arc
 	default "6be65fb56ea6694a9260733a536a023a1e2d4d57" if BR2_microblaze
-	default "7.4.1"    if BR2_GDB_VERSION_7_4
-	default "7.5.1"    if BR2_GDB_VERSION_7_5
 	default "7.6.2"    if BR2_GDB_VERSION_7_6 || !BR2_PACKAGE_HOST_GDB
 	default "7.7.1"    if BR2_GDB_VERSION_7_7 || BR2_powerpc64le

index dad359e..54b2f14 100644
@@ -184,6 +184,30 @@ config BR2_GDB_VERSION_7_5
 	  The 7.5 version of gdb has been removed. Use a newer version
 	  instead.
 
+config BR2_BUSYBOX_VERSION_1_19_X
+	bool "busybox version selection has been removed"
+	select BR2_LEGACY
+	help
+	  The possibility of selecting the Busybox version has been
+	  removed. Use the latest version provided by the Busybox
+	  package instead.
+
+config BR2_BUSYBOX_VERSION_1_20_X
+	bool "busybox version selection has been removed"
+	select BR2_LEGACY
+	help
+	  The possibility of selecting the Busybox version has been
+	  removed. Use the latest version provided by the Busybox
+	  package instead.
+
+config BR2_BUSYBOX_VERSION_1_21_X
+	bool "busybox version selection has been removed"
+	select BR2_LEGACY
+	help
+	  The possibility of selecting the Busybox version has been
+	  removed. Use the latest version provided by the Busybox
+	  package instead.
+
 ###############################################################################
 comment "Legacy options removed in 2014.05"
 

164 lines not on this page · raw message

deleted file mode 100644
index 456fb08..0000000
@@ -1,25 +0,0 @@
---- busybox-1.20.2/libbb/kernel_version.c
-+++ busybox-1.20.2-kernel_ver/libbb/kernel_version.c
-@@ -20,18 +20,15 @@
- int FAST_FUNC get_linux_version_code(void)
- {
- 	struct utsname name;
--	char *s;
-+	char *s, *t;
- 	int i, r;
- 
--	if (uname(&name) == -1) {
--		bb_perror_msg("can't get system information");
--		return 0;
--	}
--
-+	uname(&name); /* never fails */
- 	s = name.release;
- 	r = 0;
- 	for (i = 0; i < 3; i++) {
--		r = r * 256 + atoi(strtok(s, "."));
-+		t = strtok(s, ".");
-+		r = r * 256 + (t ? atoi(t) : 0);
- 		s = NULL;
- 	}
- 	return r;

deleted file mode 100644
index 17fc0b1..0000000
@@ -1,11 +0,0 @@
---- busybox-1.20.2/networking/ntpd.c
-+++ busybox-1.20.2-ntpd/networking/ntpd.c
-@@ -1840,7 +1840,7 @@ recv_and_process_client_pkt(void /*int f
- 
- 	/* Build a reply packet */
- 	memset(&msg, 0, sizeof(msg));
--	msg.m_status = G.stratum < MAXSTRAT ? G.ntp_status : LI_ALARM;
-+	msg.m_status = G.stratum < MAXSTRAT ? (G.ntp_status & LI_MASK) : LI_ALARM;
- 	msg.m_status |= (query_status & VERSION_MASK);
- 	msg.m_status |= ((query_status & MODE_MASK) == MODE_CLIENT) ?
- 			 MODE_SERVER : MODE_SYM_PAS;

67 lines not on this page · raw message

123 lines not on this page · raw message

deleted file mode 100644
index 0a39d56..0000000
@@ -1,32 +0,0 @@
-From 676452a92d1fc4f85e8d89930d7729197c031026 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <[email protected]>
-Date: Sat, 5 Oct 2013 15:51:56 +0200
-Subject: [PATCH 1/3] libbb: use <poll.h> instead of <sys/poll.h>
-
-As the pol() manpage recommends, include the <poll.h> header instead
-of <sys/poll.h>. This allows to get rid of gazillions of warnings when
-building BusyBox against the musl C library, which prints a warning
-when the internal header <sys/poll.h> is included directly instead of
-the <poll.h> header.
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
----
- include/libbb.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/libbb.h b/include/libbb.h
-index e520060..f03f454 100644
---- a/include/libbb.h
-+++ b/include/libbb.h
-@@ -37,7 +37,7 @@
- #include <libgen.h> /* dirname,basename */
- #undef basename
- #define basename dont_use_basename
--#include <sys/poll.h>
-+#include <poll.h>
- #include <sys/ioctl.h>
- #include <sys/mman.h>
- #include <sys/socket.h>
--- 
-1.8.1.2
-

deleted file mode 100644
index ed35719..0000000
@@ -1,33 +0,0 @@
-From 5eae213031a3ef88fe8d9d0a387f44264ea635cc Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <[email protected]>
-Date: Sat, 5 Oct 2013 15:53:16 +0200
-Subject: [PATCH 2/3] network/ifconfig: include <linux/if_slip.h> instead of
- <net/if_slip.h>
-
-The musl C library doesn't provide the <net/if_slip.h> since userspace
-applications can just as well use the <linux/if_slip.h> kernel header.
-
-This commit fixes the build of the ifconfig applet with the musl C
-library.
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
----
- networking/ifconfig.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/networking/ifconfig.c b/networking/ifconfig.c
-index 782374b..c90ed6b 100644
---- a/networking/ifconfig.c
-+++ b/networking/ifconfig.c
-@@ -56,7 +56,7 @@
- #endif
- 
- #if ENABLE_FEATURE_IFCONFIG_SLIP
--# include <net/if_slip.h>
-+# include <linux/if_slip.h>
- #endif
- 
- /* I don't know if this is needed for busybox or not.  Anyone? */
--- 
-1.8.1.2
-

deleted file mode 100644
index 7b74656..0000000
@@ -1,36 +0,0 @@
-From d4fec31889ad660a58dab633c511221feb66e817 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <[email protected]>
-Date: Sat, 5 Oct 2013 15:55:06 +0200
-Subject: [PATCH 3/3] networking/libiproute: use <linux/if_packet.h> instead of
- <net/if_packet.h>
-
-The musl C library doesn't provide the <net/if_packet.h> since the
-corresponding kernel headers <linux/if_packet.h> already provides the
-necessary definitions. Replacing <net/if_packet.h> by
-<linux/if_packet.h> also removes the need to include
-<netpacket/packet.h>
-
-This commit fixes the build of iplink with the musl C library.
-
-Signed-off-by: Thomas Petazzoni <[email protected]>
----
- networking/libiproute/iplink.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
-diff --git a/networking/libiproute/iplink.c b/networking/libiproute/iplink.c
-index bad2017..32ccb1c 100644
---- a/networking/libiproute/iplink.c
-+++ b/networking/libiproute/iplink.c
-@@ -5,8 +5,7 @@
-  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
-  */
- #include <net/if.h>
--#include <net/if_packet.h>
--#include <netpacket/packet.h>
-+#include <linux/if_packet.h>
- #include <netinet/if_ether.h>
- 
- #include "ip_common.h"  /* #include "libbb.h" is inside */
--- 
-1.8.1.2
-

index a356863..f2f2990 100644
@@ -11,44 +11,9 @@ config BR2_PACKAGE_BUSYBOX
 
 if BR2_PACKAGE_BUSYBOX
 
-choice
-	prompt "BusyBox Version"
-	default BR2_BUSYBOX_VERSION_1_22_X
-	help
-	  Select the version of BusyBox you wish to use.
-
-	config BR2_BUSYBOX_VERSION_1_19_X
-		bool "BusyBox 1.19.x"
-		depends on BR2_DEPRECATED_SINCE_2014_02
-
-	config BR2_BUSYBOX_VERSION_1_20_X
-		bool "BusyBox 1.20.x"
-
-	config BR2_BUSYBOX_VERSION_1_21_X
-		bool "BusyBox 1.21.x"
-
-	config BR2_BUSYBOX_VERSION_1_22_X
-		bool "BusyBox 1.22.x"
-
-	config BR2_PACKAGE_BUSYBOX_SNAPSHOT
-		bool "daily snapshot"
-
-endchoice
-
-config BR2_BUSYBOX_VERSION
-	string
-	default "1.19.4"	if BR2_BUSYBOX_VERSION_1_19_X
-	default "1.20.2"	if BR2_BUSYBOX_VERSION_1_20_X
-	default "1.21.1"	if BR2_BUSYBOX_VERSION_1_21_X
-	default "1.22.1"	if BR2_BUSYBOX_VERSION_1_22_X
-
 config BR2_PACKAGE_BUSYBOX_CONFIG
 	string "BusyBox configuration file to use?"
-	default "package/busybox/busybox-1.21.x.config" if BR2_PACKAGE_BUSYBOX_SNAPSHOT
-	default "package/busybox/busybox-1.19.x.config" if BR2_BUSYBOX_VERSION_1_19_X
-	default "package/busybox/busybox-1.20.x.config" if BR2_BUSYBOX_VERSION_1_20_X
-	default "package/busybox/busybox-1.21.x.config" if BR2_BUSYBOX_VERSION_1_21_X
-	default "package/busybox/busybox-1.22.x.config" if BR2_BUSYBOX_VERSION_1_22_X
+	default "package/busybox/busybox.config"
 	help
 	  Some people may wish to use their own modified BusyBox configuration
 	  file, and will specify their config file location with this option.

similarity index 100%
rename from package/busybox/1.22.1/0001-networking-libiproute-use-linux-if_packet.h-instead-.patch
rename to package/busybox/busybox-0001-networking-libiproute-use-linux-if_packet.h-instead-.patch

similarity index 100%
rename from package/busybox/1.22.1/0002-busybox-1.22.1-ash.patch
rename to package/busybox/busybox-0002-busybox-1.22.1-ash.patch

similarity index 100%
rename from package/busybox/1.22.1/0003-busybox-1.22.1-date.patch
rename to package/busybox/busybox-0003-busybox-1.22.1-date.patch

similarity index 100%
rename from package/busybox/1.22.1/0004-busybox-1.22.1-iplink.patch
rename to package/busybox/busybox-0004-busybox-1.22.1-iplink.patch

similarity index 100%
rename from package/busybox/1.22.1/0005-busybox-1.22.1-nc.patch
rename to package/busybox/busybox-0005-busybox-1.22.1-nc.patch

1,013 lines not on this page · raw message

1,024 lines not on this page · raw message

397 lines not on this page · raw message

similarity index 100%
rename from package/busybox/busybox-1.22.x.config
rename to package/busybox/busybox.config

index c368b80..d7bfd0e 100644

Lines of this file are not shown. View the raw message.