clk: qcom: HDMI source sel is 3 not 2
Subsystems (3)
PATCH 1/1 clk: qcom: HDMI source sel is 3 not 2
The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix the code so that we can properly select the HDMI PLL.
Fixes 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)"
Reported-by Rob Clark <[email protected]>
Signed-off-by Stephen Boyd <[email protected]>
--- drivers/clk/qcom/mmcc-msm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/qcom/mmcc-msm8960.c +1 -1
@@ -1209,7 +1209,7 @@ static struct clk_branch rot_clk = {static u8 mmcc_pxo_hdmi_map[] = { [P_PXO ] =0 , - [P_HDMI_PLL ] =2 , + [P_HDMI_PLL ] =3 , };static const char *mmcc_pxo_hdmi[] = {
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
Mike Turquette
AppliedPATCH 1/1 clk: qcom: HDMI source sel is 3 not 2
Quoting Stephen Boyd (2014-06-25 14:44:19)
Quoted 6 lines
The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix the code so that we can properly select the HDMI PLL.
Fixes 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)"Reported-by Rob Clark <[email protected]>Signed-off-by Stephen Boyd <[email protected]>
Applied to clk-fixes.
Regards,
Mike
Quoted 21 lines
--- drivers/clk/qcom/mmcc-msm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/clk/qcom/mmcc-msm8960.c +1
-1@@ -1209,7 +1209,7 @@ static struct clk_branch rot_clk = {static u8 mmcc_pxo_hdmi_map[] = { [P_PXO ] =0 , - [P_HDMI_PLL ] =2 , + [P_HDMI_PLL ] =3 , };static const char *mmcc_pxo_hdmi[] = {Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation