Documentation: Various tweaks to user manual, device tree chapter.

Grammar, typoes, font, link fixes.

Signed-off-by Robert P. J. Day <[email protected]>

---

Documentation/user/devicetree.rst +15 -14

index 856ff6a..17934d8 100644
@@ -4,29 +4,29 @@ Devicetree support
 ==================
 
 Flattened Device Tree (FDT) is a data structure for describing the hardware on
-a system. On an increasing number of boards both barebox and the Linux Kernel can
+a system. On an increasing number of boards, both barebox and the Linux kernel can
 probe their devices directly from devicetrees. barebox needs the devicetree compiled
-into the binary. The Kernel usually does not have a devicetree compiled in, instead
-the Kernel expects to be passed a devicetree from the bootloader.
+into the binary. The kernel usually does not have a devicetree compiled in; instead,
+the kernel expects to be passed a devicetree from the bootloader.
 
 From a bootloader's point of view, using devicetrees has the advantage that the
-same devicetree is used to probe both the Kernel and the Bootloader; this
+same devicetree can be used by both the bootloader and the kernel; this
 drastically reduces porting effort since the devicetree has to be written only
-once (and with luck somebody has already written a devicetree for the Kernel).
-Probing barebox from devicetree is highly recommended for new projects.
+once (and with luck somebody has already written a devicetree for the kernel).
+Having barebox consult a devicetree is highly recommended for new projects.
 
 .. _internal_devicetree:
 
 The internal devicetree
 -----------------------
 
-The devicetree barebox has been probed from plays a special role. It is referred to
-as the :ref:`internal_devicetree`. The barebox devicetree commands work on this
-devicetree. The devicetree source (DTS) files are kept in sync with the Kernel DTS
+The devicetree consulted by barebox plays a special role. It is referred to
+as the "internal devicetree." The barebox devicetree commands work on this
+devicetree. The devicetree source (DTS) files are kept in sync with the kernel DTS
 files. As the FDT files are meant to be backward compatible, it should always be possible
-to start a Kernel with the barebox internal devicetree. However, since the barebox
+to start a kernel with the barebox internal devicetree. However, since the barebox
 devicetree may not be complete or contain bugs it is always possible to start the
-Kernel with another devicetree than barebox has been started with.
+kernel with a devicetree different from the one used by barebox.
 If a device has been probed from the devicetree then using the :ref:`command_devinfo`
 command on it will show the corresponding devicetree node:
 

@@ -73,10 +73,11 @@ work on the internal devicetree. It is possible to add/remove nodes using the
 
 It is important to know that these commands always work on the internal
 devicetree. If you modify the internal devicetree to influence the behaviour of
-a Kernel booted later, make sure that you start the kernel with the internal
+a kernel booted later, make sure that you start the kernel with the internal
 devicetree (i.e. don't pass a devicetree to the :ref:`command_bootm` command). If you
-wish to use another devicetree than the internal devicetree for starting the Kernel,
-you can exchange the internal devicetree during runtime:
+wish to use another devicetree than the internal devicetree for starting the kernel,
+you can exchange the internal devicetree during runtime using the
+:ref:`command_oftree` command:
 
 .. code-block:: sh
 

Signature · 14 lines

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox