ASoC: RT286: Fix silent at the beginning of stream
Subsystems (3)
PATCH 1/1 ASoC: RT286: Fix silent at the beginning of stream
From: Bard Liao <[email protected]>
This patch fix the issue that the output is almost silent at the beginning of starting a playback.
Signed-off-by Bard Liao <[email protected]>
--- sound/soc/codecs/rt286.c | 20 +++++++++++++++++++- sound/soc/codecs/rt286.h | 5 +++++ 2 files changed, 24 insertions(+), 1 deletion(-)
sound/soc/codecs/rt286.c +19 -1
@@ -54,6 +54,7 @@ static struct reg_default rt286_index_def[] = { { 0x09, 0xd810 }, { 0x0a, 0x0060 }, { 0x0b, 0x0000 }, + { 0x0d, 0x2800 }, { 0x0f, 0x0000 }, { 0x19, 0x0a17 }, { 0x20, 0x0020 },
@@ -62,6 +63,9 @@ static struct reg_default rt286_index_def[] = { { 0x4f, 0x50e9 }, { 0x50, 0x2c00 }, { 0x63, 0x2902 }, + { 0x67, 0x1111 }, + { 0x68, 0x1016 }, + { 0x69, 0x273f }, };#define INDEX_CACHE_SIZE ARRAY_SIZE(rt286_index_def)
@@ -902,14 +906,23 @@ static int rt286_set_bias_level(struct snd_soc_codec *codec, {switch (level) {case SND_SOC_BIAS_PREPARE : -if (SND_SOC_BIAS_STANDBY == codec->dapm.bias_level) +if (SND_SOC_BIAS_STANDBY == codec->dapm.bias_level) {snd_soc_write (codec,RT286_SET_AUDIO_POWER ,AC_PWRST_D0 ); +snd_soc_update_bits (codec, +RT286_DC_GAIN ,0x200 ,0x200 ); + } +break ; + +case SND_SOC_BIAS_ON : +mdelay (10 );break ;case SND_SOC_BIAS_STANDBY :snd_soc_write (codec,RT286_SET_AUDIO_POWER ,AC_PWRST_D3 ); +snd_soc_update_bits (codec, +RT286_DC_GAIN ,0x200 ,0x0 );break ;default :
@@ -1152,6 +1165,11 @@ static int rt286_i2c_probe(struct i2c_client *i2c,/*Power down LDO2*/ regmap_update_bits (rt286->regmap,RT286_POWER_CTRL2 ,0x8 ,0x0 ); +/*Set depop parameter*/ +regmap_update_bits (rt286->regmap,RT286_DEPOP_CTRL2 ,0x403a ,0x401a ); +regmap_update_bits (rt286->regmap,RT286_DEPOP_CTRL3 ,0xf777 ,0x4737 ); +regmap_update_bits (rt286->regmap,RT286_DEPOP_CTRL4 ,0x00ff ,0x003f ); +if (rt286->i2c->irq) {regmap_update_bits (rt286->regmap,RT286_IRQ_CTRL ,0x2 ,0x2 );
sound/soc/codecs/rt286.h +5 -0
@@ -127,6 +127,7 @@#define RT286_I2S_CTRL1 0x09#define RT286_I2S_CTRL2 0x0a#define RT286_CLK_DIV 0x0b +#define RT286_DC_GAIN 0x0d#define RT286_POWER_CTRL3 0x0f#define RT286_MIC1_DET_CTRL 0x19#define RT286_MISC_CTRL1 0x20
@@ -135,6 +136,10 @@#define RT286_CBJ_CTRL1 0x4f#define RT286_CBJ_CTRL2 0x50#define RT286_PLL_CTRL 0x63 +#define RT286_DEPOP_CTRL1 0x66 +#define RT286_DEPOP_CTRL2 0x67 +#define RT286_DEPOP_CTRL3 0x68 +#define RT286_DEPOP_CTRL4 0x69/* SPDIF (0x06) */ #define RT286_SPDIF_SEL_SFT 0
Signature · 1 line
1.8.1.1.439.g50a6b54
Quoted 4 lines · On Mon, Jul 07, 2014 at 07:15:30PM +0800, [email protected] wrote:
From: Bard Liao <[email protected]>
This patch fix the issue that the output is almost silent at the beginning of starting a playback.
Applied, thanks.