ARM: dts: OMAP5: Add device nodes for ABB
PATCH v2 1/1 ARM: dts: OMAP5: Add device nodes for ABB
From: "Andrii.Tseglytskyi" <[email protected]>
Add ABB device nodes for OMAP5 family of devices. Data is based on final production OMAP543x Technical Reference Manual revision Z (April 2013). Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014).
---
Original patch (v1): https://patchwork.kernel.org/patch/3555191/
Rest of the series was accepted, however, I had to drop this previously to ensure that the data we introduce is compatible with production samples and existing pre-production samples on various OMAP5uEVMs already in circulation.
arch/arm/boot/dts/omap5.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
arch/arm/boot/dts/omap5.dtsi +60 -0
@@ -985,6 +985,66 @@ dma-names = "audio_tx"; }; }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; }; };
Signature · 1 line
1.7.9.5
PATCH v2 1/1 ARM: dts: OMAP5: Add device nodes for ABB
Quoted 9 lines · Nishanth Menon
From: "Andrii.Tseglytskyi" <[email protected]>
Add ABB device nodes for OMAP5 family of devices. Data is based on final production OMAP543x Technical Reference Manual revision Z (April 2013). Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014).
[[email protected]: co-developer and updates to latest documentation]Signed-off-by Nishanth Menon <[email protected]>Signed-off-by Andrii.Tseglytskyi <[email protected]>
Quoted 7 lines
---
Original patch (v1): https://patchwork.kernel.org/patch/3555191/Rest of the series was accepted, however, I had to drop this previously to ensure that the data we introduce is compatible with production samples and existing pre-production samples on various OMAP5uEVMs already in circulation.
Is this OK to queue for v3.17 or do we need it for the -rc cycle?
Regards,
Tony
Quoted 77 lines
arch/arm/boot/dts/omap5.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)arch/arm/boot/dts/omap5.dtsi +60
-0@@ -985,6 +985,66 @@ dma-names = "audio_tx"; }; }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; }; };Signature · 1 line
1.7.9.5
PATCH v2 1/1 ARM: dts: OMAP5: Add device nodes for ABB
Quoted 13 lines · Tony Lindgren
Quoted 12 lines · Nishanth Menon
From: "Andrii.Tseglytskyi" <[email protected]>
Add ABB device nodes for OMAP5 family of devices. Data is based on final production OMAP543x Technical Reference Manual revision Z (April 2013). Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014).
[nm at ti.com: co-developer and updates to latest documentation]Signed-off-by Nishanth Menon <[email protected]>Signed-off-by Andrii.Tseglytskyi <[email protected]>---
Original patch (v1): https://patchwork.kernel.org/patch/3555191/
Quoted 7 lines
Quoted 4 lines
Rest of the series was accepted, however, I had to drop this previously to ensure that the data we introduce is compatible with production samples and existing pre-production samples on various OMAP5uEVMs already in circulation.
Is this OK to queue for v3.17 or do we need it for the -rc cycle?
.17 should be fine Tony. Thanks for following up.
Regards,
Nishanth Menon
PATCH v2 1/1 ARM: dts: OMAP5: Add device nodes for ABB
Quoted 19 lines · Nishanth Menon
Quoted 18 lines · Tony Lindgren
Quoted 16 lines · Nishanth Menon
From: "Andrii.Tseglytskyi" <[email protected]>
Add ABB device nodes for OMAP5 family of devices. Data is based on final production OMAP543x Technical Reference Manual revision Z (April 2013). Final production Data Manual for OMAP5432 SWPS050F(APRIL 2014).
[[email protected]: co-developer and updates to latest documentation]Signed-off-by Nishanth Menon <[email protected]>Signed-off-by Andrii.Tseglytskyi <[email protected]>---
Original patch (v1): https://patchwork.kernel.org/patch/3555191/Rest of the series was accepted, however, I had to drop this previously to ensure that the data we introduce is compatible with production samples and existing pre-production samples on various OMAP5uEVMs already in circulation.
Quoted 4 lines
Quoted 2 lines
Is this OK to queue for v3.17 or do we need it for the -rc cycle?
.17 should be fine Tony. Thanks for following up.
OK applying into omap-for-v3.17/fixes-not-urgent thanks.
Tony