ARM: shmobile: Remove early_printk from command line
Subsystems (2)
cover ARM: shmobile: Remove early_printk from command line
As early printk is not supported when devices are initialised using DT, so remove it from the command line.
Based on renesas-devel-v3.16-rc3-20140706.
Simon Horman (2):
ARM: shmobile: armadillo800eva-reference: Remove early_printk from
command line
ARM: shmobile: kzm9g-reference: Remove early_printk from command line
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 +- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
Signature · 1 line
2.0.0.rc2
PATCH 1/2 ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line
As early printk is not supported when devices are initialised using DT, so remove it from the command line.
--- arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +1 -1
@@ -20,7 +20,7 @@ compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; chosen { - bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; memory {
Signature · 1 line
2.0.0.rc2
PATCH 2/2 ARM: shmobile: kzm9g-reference: Remove early_printk from command line
In reply to Simon HormanAs early printk is not supported when devices are initialised using DT, so remove it from the command line.
--- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +1 -1
@@ -35,7 +35,7 @@ }; chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw"; + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; }; memory {
Signature · 1 line
2.0.0.rc2
cover ARM: shmobile: Remove early_printk from command line
In reply to Simon HormanQuoted 9 lines · Simon Horman
As early printk is not supported when devices are initialised using DT, so remove it from the command line.
Based on renesas-devel-v3.16-rc3-20140706.
Simon Horman (2):
ARM: shmobile: armadillo800eva-reference: Removeearly_printkfrom
command line
ARM: shmobile: kzm9g-reference: Removeearly_printkfrom command line
I have queued these up.