Practical way to rename kernel-release on custom kernel
Hi Guys,
This question might be very easy for all of you. But seem this is kernelnewbies mailing list. I need to ask this question.
I in the middle of learning to build custom kernel and my question is how to have custom name for kernel version.
$ uname -r
I can see custom kernel print message.
Quoted 1 line
From what I read, we can change inside .config
CONFIG_LOCALVERSION="-ARCH"
will produce the kernel release naming something like this. 3.16.0-rc3-ARCH
But somehow, when I try to install the modules
$make modules_install
I can see makefile create folder inside the lib/modules with naming 3.16.0-rc3-ARCH-00570-g110e430
110e430 is actually commit id and I check that naming is generated by #define UTS_RELEASE "3.16.0-rc3-ARCH-00570-g110e430" in the "include/generated/utsrelease.h" header which will overwrite "include/config/kernel.release".
Back to the question, what is the practical way to naming the kernel release for custom kernel? with additional question for understanding more from where that utsrelease came from?
Thanks,
Regards,
Safarin
Quoted 10 lines
Back to the question, what is the practical way to naming the kernel release for custom kernel? with additional question for understanding more from where that utsrelease came from?
Thanks,
Regards,
Safarin
You can issue the command "make all KERNELRELEASE=your-custom-kernel-name"
Regards,
Ayan Kumar Halder
In Documentation/kbuild/makefiles.txt, you can see:
...
1365 VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
1366
1367 These variables define the current kernel version. A few arch 1368 Makefiles actually use these values directly; they should use 1369 $(KERNELRELEASE) instead. 1370 1371 $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic 1372 three-part version number, such as "2", "4", and "0". These three 1373 values are always numeric. 1374 1375 $(EXTRAVERSION) defines an even tinier sublevel for pre-patches 1376 or additional patches. It is usually some non-numeric string 1377 such as "-pre4", and is often blank. 1378 1379 KERNELRELEASE 1380 1381 $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable 1382 for constructing installation directory names or showing in 1383 version strings. Some arch Makefiles use it for this purpose. 1384 1385 ARCH 1386 1387 This variable defines the target architecture, such as "i386", 1388 "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to 1389 determine which files to compile. 1390 1391 By default, the top Makefile sets $(ARCH) to be the same as the 1392 host system architecture. For a cross build, a user may 1393 override the value of $(ARCH) on the command line:
1394
1395 make ARCH=m68k ..
...
--
Regards,
shhuiw
Quoted 35 lines · Safarin
Hi Guys,
This question might be very easy for all of you. But seem this is kernelnewbies mailing list. I need to ask this question.
I in the middle of learning to build custom kernel and my question is how to have custom name for kernel version.
$ uname -rI can see custom kernel print message.
Quoted 1 line
From what I read, we can change inside .config
CONFIG_LOCALVERSION="-ARCH"
will produce the kernel release naming something like this. 3.16.0-rc3-ARCHBut somehow, when I try to install the modules
$make
modules_installI can see makefile create folder inside the lib/modules with naming 3.16.0-rc3-ARCH-00570-g110e430
110e430 is actually commit id and I check that naming is generated by #define
UTS_RELEASE"3.16.0-rc3-ARCH-00570-g110e430" in the "include/generated/utsrelease.h" header which will overwrite "include/config/kernel.release".Back to the question, what is the practical way to naming the kernel release for custom kernel? with additional question for understanding more from where that utsrelease came from?
Thanks,
Quoted 7 lines
Regards,
Safarin_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20140711/b34c3522/attachment.html
Tried but found change KERNELRELEASE can only affect uname output. If you want to make version change, should modify top-level Makefile:
1 VERSION = 3
2 PATCHLEVEL = 13
3 SUBLEVEL = 5
4 EXTRAVERSION =
5 NAME = One Giant Leap for Frogkind
--
Regards,
shhuiw
At 2014-07-11 08:47:07, "shhuiw" <[email protected]> wrote:
In Documentation/kbuild/makefiles.txt, you can see:
...
1365 VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
1366
1367 These variables define the current kernel version. A few arch 1368 Makefiles actually use these values directly; they should use 1369 $(KERNELRELEASE) instead. 1370 1371 $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic 1372 three-part version number, such as "2", "4", and "0". These three 1373 values are always numeric. 1374 1375 $(EXTRAVERSION) defines an even tinier sublevel for pre-patches 1376 or additional patches. It is usually some non-numeric string 1377 such as "-pre4", and is often blank. 1378 1379 KERNELRELEASE 1380 1381 $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable 1382 for constructing installation directory names or showing in 1383 version strings. Some arch Makefiles use it for this purpose. 1384 1385 ARCH 1386 1387 This variable defines the target architecture, such as "i386", 1388 "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to 1389 determine which files to compile. 1390 1391 By default, the top Makefile sets $(ARCH) to be the same as the 1392 host system architecture. For a cross build, a user may 1393 override the value of $(ARCH) on the command line:
1394
1395 make ARCH=m68k ..
...
--
Regards,
shhuiw
Quoted 35 lines · Safarin
Hi Guys,
This question might be very easy for all of you. But seem this is kernelnewbies mailing list. I need to ask this question.
I in the middle of learning to build custom kernel and my question is how to have custom name for kernel version.
$ uname -rI can see custom kernel print message.
Quoted 1 line
From what I read, we can change inside .config
CONFIG_LOCALVERSION="-ARCH"
will produce the kernel release naming something like this. 3.16.0-rc3-ARCHBut somehow, when I try to install the modules
$make
modules_installI can see makefile create folder inside the lib/modules with naming 3.16.0-rc3-ARCH-00570-g110e430
110e430 is actually commit id and I check that naming is generated by #define
UTS_RELEASE"3.16.0-rc3-ARCH-00570-g110e430" in the "include/generated/utsrelease.h" header which will overwrite "include/config/kernel.release".Back to the question, what is the practical way to naming the kernel release for custom kernel? with additional question for understanding more from where that utsrelease came from?
Thanks,
Quoted 7 lines
Regards,
Safarin_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kernelnewbies.org/pipermail/kernelnewbies/attachments/20140711/cb31da2a/attachment-0001.html
Hi Guys,
Thanks for the reply. I have tried all you guys suggested. Like shhuiw said that KERNELRELEASE only affect uname output so I use method to change the naming by change inside the top level makefile.
Eventhough, I have make a change the output still not like I want. I still see long output for that naming
$VERSION.$PATCHLEVEL.$SUBLEVEL-$EXTRAVERSION--ARCH-00570-g110e430-dirty
which it come from git commit id.
$ git describe v3.16-rc2-570-g110e430 **(not sure why got dirty at the end of the line)
But I already figure it out how to disable that long naming. By disable inside .config under "CONFIG_LOCALVERSION_AUTO"
Thanks again.
Regards,
Safarin
Quoted 110 lines · shhuiw
Tried but found change KERNELRELEASE can only affect uname output. If you want to make version change, should modify top-level
Makefile:1 VERSION = 3
2 PATCHLEVEL = 13
3 SUBLEVEL = 5
4 EXTRAVERSION =
5 NAME = One Giant Leap for Frogkind--
Regards,
shhuiwAt 2014-07-11 08:47:07, "shhuiw" <[email protected]> wrote:
In
Documentation/kbuild/makefiles.txt, you can see:...
1365 VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
13661367 These variables define the current kernel version. A few arch 1368 Makefiles actually use these values directly; they should use 1369 $(KERNELRELEASE) instead. 1370 1371 $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic 1372 three-part version number, such as "2", "4", and "0". These three 1373 values are always numeric. 1374 1375 $(EXTRAVERSION) defines an even tinier sublevel for pre-patches 1376 or additional patches. It is usually some non-numeric string 1377 such as "-pre4", and is often blank. 1378 1379 KERNELRELEASE 1380 1381 $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable 1382 for constructing installation directory names or showing in 1383 version strings. Some arch Makefiles use it for this purpose. 1384 1385 ARCH 1386 1387 This variable defines the target architecture, such as "i386", 1388 "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to 1389 determine which files to compile. 1390 1391 By default, the top Makefile sets $(ARCH) to be the same as the 1392 host system architecture. For a cross build, a user may 1393 override the value of $(ARCH) on the command line:1394
1395 make ARCH=m68k ..
...--
Regards,
shhuiwQuoted 42 lines · Safarin
Hi Guys,
This question might be very easy for all of you. But seem this is kernelnewbies mailing list. I need to ask this question.
I in the middle of learning to build custom kernel and my question is how to have custom name for kernel version.
$ uname -rI can see custom kernel print message.
Quoted 1 line
From what I read, we can change inside .config
CONFIG_LOCALVERSION="-ARCH"
will produce the kernel release naming something like this. 3.16.0-rc3-ARCHBut somehow, when I try to install the modules
$make
modules_installI can see makefile create folder inside the lib/modules with naming 3.16.0-rc3-ARCH-00570-g110e430
110e430 is actually commit id and I check that naming is generated by #define
UTS_RELEASE"3.16.0-rc3-ARCH-00570-g110e430" in the "include/generated/utsrelease.h" header which will overwrite "include/config/kernel.release".Back to the question, what is the practical way to naming the kernel release for custom kernel? with additional question for understanding more from where that utsrelease came from?
Thanks,
Regards,
Safarin_______________________________________________
Kernelnewbies mailing list
Kernelnewbies at kernelnewbies.org
http://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
Quoted 3 lines · Safarin
I can see makefile create folder inside the lib/modules with naming 3.16.0-rc3-ARCH-00570-g110e430
This is the commit id which is the being appended at the end, as you may have some patch ( or uncommited changes to your makefile). Check the output of git describe and try doing a git commit -a -v if that helps.