ARM: shmobile: genmai: remove defconfig
Subsystems (2)
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
--- arch/arm/configs/genmai_defconfig | 122 -------------------------------------- 1 file changed, 122 deletions(-) delete mode 100644 arch/arm/configs/genmai_defconfig
arch/arm/configs/genmai_defconfig deleted +0 -122
@@ -1,122 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R7S72100=y -CONFIG_MACH_GENMAI=y -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CORE is not set -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_SH_ETH=y -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=10 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_RIIC=y -CONFIG_SPI=y -CONFIG_SPI_RSPI=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_RCAR_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_DRM=y -CONFIG_DRM_RCAR_DU=y -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set
Signature · 1 line
2.0.0
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
Quoted 6 lines · Simon Horman
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140715/a3eb60c4/attachment.sig>
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
In reply to Simon HormanHi Simon,
Thank you for the patch.
Quoted 6 lines · On Tuesday 15 July 2014 16:29:24 Simon Horman wrote:
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>
Now that the MTU2 boot issue has been solved (thank you for tracking it down), am I correct to assume that all timer patches, the genmai board file removal series and this patch will make it to v3.17 ?
Quoted 4 lines
--- arch/arm/configs/genmai_defconfig | 122 ----------------------------------- 1 file changed, 122 deletions(-) delete mode 100644 arch/arm/configs/genmai_defconfig
Signature · 3 lines
Regards, Laurent Pinchart
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
Quoted 12 lines · Laurent Pinchart
Hi Simon,
Thank you for the patch.
Quoted 6 lines · On Tuesday 15 July 2014 16:29:24 Simon Horman wrote:
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>
Quoted 5 lines
Acked-by Laurent Pinchart <[email protected]>Now that the MTU2 boot issue has been solved (thank you for tracking it down), am I correct to assume that all timer patches, the genmai board file removal series and this patch will make it to v3.17 ?
Yes, that is my plan.
I hope to have them queued up this evening.
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
Quoted 15 lines · Simon Horman
Quoted 14 lines · Laurent Pinchart
Hi Simon,
Thank you for the patch.
Quoted 6 lines · On Tuesday 15 July 2014 16:29:24 Simon Horman wrote:
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>Acked-by Laurent Pinchart <[email protected]>
Quoted 7 lines
Quoted 3 lines
Now that the MTU2 boot issue has been solved (thank you for tracking it down), am I correct to assume that all timer patches, the genmai board file removal series and this patch will make it to v3.17 ?
Yes, that is my plan.
I hope to have them queued up this evening.
Please take a look at renesas-next-v3.16-rc3-20140715v2 and let me know if anything is missing.
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
Hi Simon,
Quoted 20 lines · On Tuesday 15 July 2014 22:04:59 Simon Horman wrote:
Quoted 19 lines · Simon Horman
Quoted 17 lines · Laurent Pinchart
Hi Simon,
Thank you for the patch.
Quoted 6 lines · On Tuesday 15 July 2014 16:29:24 Simon Horman wrote:
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>Acked-by Laurent Pinchart <[email protected]>Now that the MTU2 boot issue has been solved (thank you for tracking it down), am I correct to assume that all timer patches, the genmai board file removal series and this patch will make it to v3.17 ?
Quoted 6 lines
Quoted 3 lines
Yes, that is my plan.
I hope to have them queued up this evening.
Please take a look at renesas-next-v3.16-rc3-20140715v2 and let me know if anything is missing.
Everything seems to be in order. Thank you.
Signature · 3 lines
Regards, Laurent Pinchart
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
Quoted 23 lines · Laurent Pinchart
Hi Simon,
Quoted 20 lines · On Tuesday 15 July 2014 22:04:59 Simon Horman wrote:
Quoted 19 lines · Simon Horman
Quoted 17 lines · Laurent Pinchart
Hi Simon,
Thank you for the patch.
Quoted 6 lines · On Tuesday 15 July 2014 16:29:24 Simon Horman wrote:
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>Acked-by Laurent Pinchart <[email protected]>Now that the MTU2 boot issue has been solved (thank you for tracking it down), am I correct to assume that all timer patches, the genmai board file removal series and this patch will make it to v3.17 ?
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Yes, that is my plan.
I hope to have them queued up this evening.
Please take a look at renesas-next-v3.16-rc3-20140715v2 and let me know if anything is missing.
Everything seems to be in order. Thank you.
Great thanks.
PATCH 1/1 ARM: shmobile: genmai: remove defconfig
In reply to Laurent PinchartQuoted 10 lines · Wolfram Sang
Quoted 6 lines · Simon Horman
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>Acked-by Wolfram Sang <[email protected]>
Quoted 5 lines · Laurent Pinchart
Hi Simon,
Thank you for the patch.
On Tuesday 15 July 2014 16:29:24 Simon Horman wrote:
Quoted 8 lines
Quoted 6 lines
The genmai board code is scheduled for removal and once that occurs the defconfig will be of no use. Remove it.
Cc Laurent Pinchart <[email protected]>Cc Wolfram Sang <[email protected]>Signed-off-by Simon Horman <[email protected]>Acked-by Laurent Pinchart <[email protected]>
Thanks, I have queued this up.