Howto tell kernel to use 4096 as granularity & minimum size?
I have a hard disk with a "512e" sector size: emulated 512, really 4096.
The disk returns a 512-byte size to drivers for compatibility.
I can partition the disk and setup the allocation size to 4096, but I'd like to tell the kernel to use a virtual-size of 4096 for the sector as an additional performance 'hint', so nothing will even try to use smaller i/o's than that.
However, this doesn't seem to work ("# prompt" does mean root):
/sys/block/sdd/queue# echo 4096 >minimum_io_size bash: minimum_io_size: Permission denied
I realize this is probably implemented as a R-O value, but it there a reason it needs to be if an admin wants to increase it to a multiple of an emulated I/O size so as to have it represent the physical sector size?
I.e. if the "/sys" code was patched to allow modification of this variable, would it work for the purpose I am describing (i.e. ignoring emulated 512 size and using the real 4096 size as a minimum (I wouldn't intend or want this to affect the sector# addressing, which would still be done using 512B sector blocks.
Thanks!
Quoted 9 lines · Linda A. Walsh
I have a hard disk with a "512e" sector size: emulated 512, really 4096.
The disk returns a 512-byte size to drivers for compatibility.
I can partition the disk and setup the allocation size to 4096, but I'd like to tell the kernel to use a virtual-size of 4096 for the sector as an additional performance 'hint', so nothing will even try to use smaller i/o's than that.
Just format the filesystem with 4k sector size.
Cheers,
Dave.
Signature · 2 lines
Dave Chinner [email protected]
Quoted 9 lines · Dave Chinner
Quoted 7 lines
I can partition the disk and setup the allocation size to 4096, but I'd like to tell the kernel to use a virtual-size of 4096 for the sector as an additional performance 'hint', so nothing will even try to use smaller i/o's than that.
Just format the filesystem with 4k sector size.
---
Good idea, though.. I wanted to set it for the whole "disk"(array)
as it (multiple 4T drives) will be subdivided into multiple filesystems and have lvm and a partition table under the file system(s), so telling the kernel to only do 4K alloc+io's to the whole thing would cover the most with the least.
Quoted 9 lines · On Mon, 21 Jul 2014 13:45:22 -0700 Linda Walsh <[email protected]> wrote:
Quoted 8 lines · Dave Chinner
Quoted 7 lines
I can partition the disk and setup the allocation size to 4096, but I'd like to tell the kernel to use a virtual-size of 4096 for the sector as an additional performance 'hint', so nothing will even try to use smaller i/o's than that.
Quoted 7 lines
Quoted 1 line
Just format the filesystem with 4k sector size.
---
Good idea, though.. I wanted to set it for the whole "disk"(array)
as it (multiple 4T drives) will be subdivided into multiple filesystems and have lvm and a partition table under the file system(s), so telling the kernel to only do 4K alloc+io's to the whole thing would cover the most with the least.
Also before you format it read the specification if you are using SATA drives. The disk is not necessarily aligned so that the physical/logical block boundary is as you'd expect. Some devices have a partial physical sector at the start in order to make it happen to work nicely with legacy software.
Good fdisk tools know about this. It's in the ATA8 specification for identify.
Alan