qemu/mips64-malta: update defconfig to Linux 3.15.x
PATCH 1/1 qemu/mips64-malta: update defconfig to Linux 3.15.x
Update to 3.15.x, use Ext2 instead of Ext4. Genext2fs generates ext2 filesystem, so better use ext2 as used for qemu/mips-malta and qemu/mipsel-malta.
--- board/qemu/mips64-malta/linux-3.13.config | 59 ----------------------------- board/qemu/mips64-malta/linux-3.15.config | 59 +++++++++++++++++++++++++++++ board/qemu/mips64-malta/readme.txt | 2 +- configs/qemu_mips64_malta_defconfig | 10 ++--- 4 files changed, 65 insertions(+), 65 deletions(-) delete mode 100644 board/qemu/mips64-malta/linux-3.13.config create mode 100644 board/qemu/mips64-malta/linux-3.15.config
board/qemu/mips64-malta/linux-3.13.config deleted +0 -59
@@ -1,59 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_HZ_100=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_NAMESPACES=y -CONFIG_RELAY=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -# CONFIG_WLAN is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT4_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y
board/qemu/mips64-malta/linux-3.15.config new file +59 -0
59 lines not on this page · raw message
board/qemu/mips64-malta/readme.txt +1 -1
@@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.7.0 +Tested with QEMU 2.0.0
configs/qemu_mips64_malta_defconfig +5 -5
@@ -6,17 +6,17 @@ BR2_MIPS_NABI64=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.13 headers to avoid breaking with newer kernels +# Lock to 3.15 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.13.5" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y +BR2_DEFAULT_KERNEL_VERSION="3.15.6" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_15=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.15.6" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.13.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.15.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config
Signature · 1 line
1.7.10.4
PATCH 1/1 qemu/mips64-malta: update defconfig to Linux 3.15.x
Dear Waldemar Brodkorb,
Quoted 3 lines · Waldemar Brodkorb
Update to 3.15.x, use Ext2 instead of Ext4. Genext2fs generates ext2 filesystem, so better use ext2 as used for qemu/mips-malta and qemu/mipsel-malta.
Well, actually, Buildroot can generate ext3 and ext4 filesystems:
http://git.buildroot.net/buildroot/tree/fs/ext2/Config.in#n13.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 qemu/mips64-malta: update defconfig to Linux 3.15.x
Quoted 10 lines · Thomas Petazzoni
Dear Waldemar Brodkorb,
Quoted 3 lines · Waldemar Brodkorb
Update to 3.15.x, use Ext2 instead of Ext4. Genext2fs generates ext2 filesystem, so better use ext2 as used for qemu/mips-malta and qemu/mipsel-malta.
Well, actually, Buildroot can generate ext3 and ext4 filesystems:
http://git.buildroot.net/buildroot/tree/fs/ext2/Config.in#n13.
And there's also CONFIG_EXT4_USE_FOR_EXT23 for the kernel side, which makes the EXT4 option in the kernel cover all use cases. Regards.
PATCH 1/1 qemu/mips64-malta: update defconfig to Linux 3.15.x
Gustavo, Waldemar,
Quoted 5 lines · Gustavo Zacarias
Quoted 2 lines
Well, actually, Buildroot can generate ext3 and ext4 filesystems:
http://git.buildroot.net/buildroot/tree/fs/ext2/Config.in#n13.And there's also
CONFIG_EXT4_USE_FOR_EXT23for the kernel side, which makes the EXT4 option in the kernel cover all use cases.
So maybe, Waldemar, could you respin with CONFIG_EXT4 + CONFIG_EXT4_USE_FOR_EXT23 ?
Thanks a lot!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 qemu/mips64-malta: update defconfig to Linux 3.15.x
Quoted 4 lines · Thomas Petazzoni
So maybe, Waldemar, could you respin with
CONFIG_EXT4+CONFIG_EXT4_USE_FOR_EXT23?Thanks a lot!
CONFIG_EXT4_USE_FOR_EXT23 is default y when there's EXT4, which is the case right now, i did the config after all.
On the BR side i kept ext2 output because it was the standard norm for disk-backed samples, but we can always change that. Regards.
PATCH 1/1 qemu/mips64-malta: update defconfig to Linux 3.15.x
Hi,
Gustavo Zacarias wrote,
Quoted 5 lines · Thomas Petazzoni
Quoted 4 lines
So maybe, Waldemar, could you respin with
CONFIG_EXT4+CONFIG_EXT4_USE_FOR_EXT23?
Quoted 7 lines
Quoted 1 line
Thanks a lot!
CONFIG_EXT4_USE_FOR_EXT23is default y when there's EXT4, which is the case right now, i did the config after all.
On the BR side i kept ext2 output because it was the standard norm for disk-backed samples, but we can always change that. Regards.
Should I respin the patches to use ext4 instead of ext2 for qemu/mips-malta and qemu/mipsel-malta?
Didn't know that a genextfs filesystem could be converted to ext3/ext4. And indeed when using ext4, all three types can be used to bootup a system.
best regards
Waldemar