Skip to contentSkip to conversation

usb: ehci: rmobile: Remove xHCI address

PATCH New Nobuhiro Iwamatsu 2 participants 2 messages Jul 28, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 usb: ehci: rmobile: Remove xHCI address

echi-rmobile does not support xHCI. This removes xHCI address from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT for lager board and koelsh board.

---
 drivers/usb/host/ehci-rmobile.c | 3 ---
 include/configs/koelsch.h       | 2 +-
 include/configs/lager.h         | 2 +-
 3 files changed, 2 insertions(+), 5 deletions(-)
drivers/usb/host/ehci-rmobile.c +0 -3
index 29b4a93..0d1a726 100644
@@ -21,19 +21,16 @@ static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0A0000,	/* USB1 */
 	0xEE0C0000,	/* USB2 */
-	0xEE000000	/* USB3 (USB3.0 Host)*/
 };
 #elif defined(CONFIG_R8A7791)
 static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0C0000,	/* USB1 */
-	0xEE000000	/* USB3 (USB3.0 Host)*/
 };
 #elif defined(CONFIG_R8A7794)
 static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = {
 	0xEE080000,	/* USB0 (EHCI) */
 	0xEE0C0000,	/* USB1 */
-	/* R8A7794 does not have USB 3.0. */
 };
 #else
 #error rmobile EHCI USB driver not supported on this platform
include/configs/koelsch.h +1 -1
index 6795f28..3c2b613 100644
@@ -171,7 +171,7 @@
 /* USB */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_USB_STORAGE
 
 #endif	/* __KOELSCH_H */
include/configs/lager.h +1 -1
index f39a788..74c998f 100644
@@ -175,7 +175,7 @@
 /* USB */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_RMOBILE
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	4
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
 #define CONFIG_USB_STORAGE
 
 #endif	/* __LAGER_H */
Signature · 1 line
2.0.0
Applied
#1 lore raw

PATCH 1/1 usb: ehci: rmobile: Remove xHCI address

Quoted 5 lines · Nobuhiro Iwamatsu

echi-rmobile does not support xHCI. This removes xHCI address from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT for lager board and koelsh board.

Applied, thanks!

Best regards,
Marek Vasut