Kconfig for U-Boot
Subsystems (23)
PATCH v8 4/13 include: define CONFIG_SPL and CONFIG_TPL as 1
In reply to Masahiro YamadaWe are about to switch to Kconfig in the next commit. But there are something to get done beforehand.
In Kconfig, include/generated/autoconf.h defines boolean CONFIG macros as 1.
CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1. Otherwise, when switching to Kconfig, the build log would be sprinkled with warning messages like this:
warning: "CONFIG_SPL" redefined [enabled by default]
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3:
- Rebase on the current u-boot/master
Changes in v2:
- Rebase on the current u-boot/master
doc/README.SPL | 2 +- include/configs/B4860QDS.h | 2 +- include/configs/BSC9131RDB.h | 2 +- include/configs/BSC9132QDS.h | 2 +- include/configs/C29XPCIE.h | 4 ++-- include/configs/MPC8313ERDB.h | 2 +- include/configs/P1010RDB.h | 8 ++++---- include/configs/P1022DS.h | 8 ++++---- include/configs/P1_P2_RDB.h | 8 ++++---- include/configs/T104xRDB.h | 2 +- include/configs/T208xQDS.h | 2 +- include/configs/T208xRDB.h | 2 +- include/configs/T4240QDS.h | 2 +- include/configs/a3m071.h | 2 +- include/configs/am335x_igep0033.h | 2 +- include/configs/am3517_crane.h | 2 +- include/configs/am3517_evm.h | 2 +- include/configs/apf27.h | 2 +- include/configs/arndale.h | 2 +- include/configs/bur_am335x_common.h | 2 +- include/configs/cam_enc_4xx.h | 2 +- include/configs/cm_t35.h | 2 +- include/configs/da850evm.h | 2 +- include/configs/devkit8000.h | 2 +- include/configs/exynos5-dt.h | 2 +- include/configs/hawkboard.h | 2 +- include/configs/ipam390.h | 2 +- include/configs/lwmon5.h | 2 +- include/configs/m53evk.h | 2 +- include/configs/mcx.h | 2 +- include/configs/microblaze-generic.h | 2 +- include/configs/mx31pdk.h | 2 +- include/configs/mxs.h | 2 +- include/configs/omap3_evm_common.h | 2 +- include/configs/origen.h | 2 +- include/configs/p1_p2_rdb_pc.h | 8 ++++---- include/configs/palmtreo680.h | 2 +- include/configs/pcm051.h | 2 +- include/configs/sama5d3_xplained.h | 2 +- include/configs/sama5d3xek.h | 2 +- include/configs/siemens-am33x-common.h | 2 +- include/configs/smdkv310.h | 2 +- include/configs/socfpga_cyclone5.h | 2 +- include/configs/sunxi-common.h | 2 +- include/configs/tam3517-common.h | 2 +- include/configs/tao3530.h | 2 +- include/configs/tegra-common.h | 2 +- include/configs/ti814x_evm.h | 2 +- include/configs/ti816x_evm.h | 2 +- include/configs/ti_armv7_common.h | 2 +- include/configs/tricorder.h | 2 +- include/configs/tx25.h | 2 +- include/configs/vpac270.h | 2 +- include/configs/woodburn_sd.h | 2 +- include/configs/x600.h | 2 +- include/configs/zynq-common.h | 2 +- 56 files changed, 69 insertions(+), 69 deletions(-)
doc/README.SPL +1 -1
@@ -40,7 +40,7 @@ COBJS-$(CONFIG_SPL_BUILD) += foo.o The building of SPL images can be with: -#define CONFIG_SPL +#define CONFIG_SPL 1 Because SPL images normally have a different text base, one has to be configured by defining CONFIG_SPL_TEXT_BASE. The linker script has to be
include/configs/B4860QDS.h +1 -1
@@ -23,7 +23,7 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/BSC9131RDB.h +1 -1
@@ -25,7 +25,7 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT
include/configs/BSC9132QDS.h +1 -1
@@ -41,7 +41,7 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT
include/configs/C29XPCIE.h +2 -2
@@ -24,8 +24,8 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL -#define CONFIG_TPL +#define CONFIG_SPL 1 +#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/MPC8313ERDB.h +1 -1
@@ -19,7 +19,7 @@#define CONFIG_MPC8313ERDB 1#ifdef CONFIG_NAND -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT
include/configs/P1010RDB.h +4 -4
@@ -21,7 +21,7 @@#define CONFIG_NAND_FSL_IFC #ifdef CONFIG_SDCARD -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT
@@ -56,7 +56,7 @@#define CONFIG_SYS_TEXT_BASE 0x11000000#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc#else -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT
@@ -88,7 +88,7 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL +#define CONFIG_SPL 1#ifdef CONFIG_SECURE_BOOT #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT
@@ -108,7 +108,7 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS 0#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"#else -#define CONFIG_TPL +#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/P1022DS.h +4 -4
@@ -16,7 +16,7 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -45,7 +45,7 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -79,8 +79,8 @@#define CONFIG_SYS_NAND_MAX_OOBFREE 5#ifdef CONFIG_NAND -#define CONFIG_SPL -#define CONFIG_TPL +#define CONFIG_SPL 1 +#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/P1_P2_RDB.h +4 -4
@@ -36,7 +36,7 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -64,7 +64,7 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -93,8 +93,8 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL -#define CONFIG_TPL +#define CONFIG_SPL 1 +#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/T104xRDB.h +1 -1
@@ -22,7 +22,7 @@#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg#endif -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/T208xQDS.h +1 -1
@@ -55,7 +55,7 @@#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg#endif -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/T208xRDB.h +1 -1
@@ -44,7 +44,7 @@#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/T4240QDS.h +1 -1
@@ -25,7 +25,7 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/a3m071.h +1 -1
@@ -412,7 +412,7 @@/* * SPL related defines */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT
include/configs/am335x_igep0033.h +1 -1
@@ -211,7 +211,7 @@#undef CONFIG_USE_IRQ/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK /* * Place the image at the start of the ROM defined image space.
include/configs/am3517_crane.h +1 -1
@@ -293,7 +293,7 @@ GENERATED_GBL_DATA_SIZE)/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE
include/configs/am3517_evm.h +1 -1
@@ -302,7 +302,7 @@ GENERATED_GBL_DATA_SIZE)/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE
include/configs/apf27.h +1 -1
@@ -37,7 +37,7 @@/* * SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048
include/configs/arndale.h +1 -1
@@ -121,7 +121,7 @@/* MMC SPL */ #define CONFIG_EXYNOS_SPL -#define CONFIG_SPL +#define CONFIG_SPL 1#define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/bur_am335x_common.h +1 -1
@@ -164,7 +164,7 @@* under common/spl/. Given our generally common memory map, we set a * number of related defaults and sizes here. */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK /* * Place the image at the start of the ROM defined image space.
include/configs/cam_enc_4xx.h +1 -1
@@ -199,7 +199,7 @@#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LIBGENERIC_SUPPORT
include/configs/cm_t35.h +1 -1
@@ -316,7 +316,7 @@#define CONFIG_OMAP3_SPI /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/da850evm.h +1 -1
@@ -368,7 +368,7 @@#ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
include/configs/devkit8000.h +1 -1
@@ -281,7 +281,7 @@#define CONFIG_SYS_SRAM_SIZE 0x10000/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/exynos5-dt.h +1 -1
@@ -136,7 +136,7 @@#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20/* MMC SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/hawkboard.h +1 -1
@@ -46,7 +46,7 @@#endif /* Spl */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SUPPORT
include/configs/ipam390.h +1 -1
@@ -298,7 +298,7 @@"-(rootfs)" /* defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
include/configs/lwmon5.h +1 -1
@@ -665,7 +665,7 @@* SPL related defines */ #ifdef CONFIG_LCD4_LWMON5 -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT
include/configs/m53evk.h +1 -1
@@ -252,7 +252,7 @@/* * NAND SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"#define CONFIG_SPL_BOARD_INIT
include/configs/mcx.h +1 -1
@@ -344,7 +344,7 @@ GENERATED_GBL_DATA_SIZE)/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE
include/configs/microblaze-generic.h +1 -1
@@ -448,7 +448,7 @@#endif /* SPL part */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/mx31pdk.h +1 -1
@@ -29,7 +29,7 @@#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048
include/configs/mxs.h +1 -1
@@ -50,7 +50,7 @@#define CONFIG_ARCH_MISC_INIT /* SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
include/configs/omap3_evm_common.h +1 -1
@@ -257,7 +257,7 @@#define CONFIG_SYS_CACHELINE_SIZE 64/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800#define CONFIG_SPL_MAX_SIZE (54 * 1024)/* 8 KB for stack */
include/configs/origen.h +1 -1
@@ -65,7 +65,7 @@#undef CONFIG_CMD_NFS/* MMC SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_TEXT_BASE 0x02021410
include/configs/p1_p2_rdb_pc.h +4 -4
@@ -148,7 +148,7 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -177,7 +177,7 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -207,8 +207,8 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL -#define CONFIG_TPL +#define CONFIG_SPL 1 +#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/palmtreo680.h +1 -1
@@ -205,7 +205,7 @@/* * SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_TEXT_BASE 0xa1700000/* IPL loads SPL here */ #define CONFIG_SPL_STACK 0x5c040000/* end of internal SRAM */ #define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */
include/configs/pcm051.h +1 -1
@@ -197,7 +197,7 @@#define CONFIG_ENV_IS_NOWHERE /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT /*
include/configs/sama5d3_xplained.h +1 -1
@@ -209,7 +209,7 @@#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)/* SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000#define CONFIG_SPL_MAX_SIZE 0x10000
include/configs/sama5d3xek.h +1 -1
@@ -244,7 +244,7 @@#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000#define CONFIG_SPL_MAX_SIZE 0x10000
include/configs/siemens-am33x-common.h +1 -1
@@ -139,7 +139,7 @@#define CONFIG_SYS_I2C_OMAP24XX /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400#define CONFIG_SPL_MAX_SIZE (101 * 1024)
include/configs/smdkv310.h +1 -1
@@ -76,7 +76,7 @@#define CONFIG_ZERO_BOOTDELAY_CHECK /* MMC SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SKIP_LOWLEVEL_INIT #define COPY_BL2_FNPTR_ADDR 0x00002488
include/configs/socfpga_cyclone5.h +1 -1
@@ -223,7 +223,7 @@*/ /* Enable building of SPL globally */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK /* TEXT_BASE for linking the SPL binary */
include/configs/sunxi-common.h +1 -1
@@ -127,7 +127,7 @@#ifdef CONFIG_SPL_FEL -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"#define CONFIG_SPL_TEXT_BASE 0x2000
include/configs/tam3517-common.h +1 -1
@@ -215,7 +215,7 @@#define CONFIG_NET_RETRY_COUNT 10/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_CONSOLE
include/configs/tao3530.h +1 -1
@@ -301,7 +301,7 @@#define CONGIG_CMD_STORAGE /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/tegra-common.h +1 -1
@@ -131,7 +131,7 @@#define CONFIG_CMD_ENTERRCM /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_BOARD_INIT
include/configs/ti814x_evm.h +1 -1
@@ -168,7 +168,7 @@#define CONFIG_ENV_IS_NOWHERE /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300000#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
include/configs/ti816x_evm.h +1 -1
@@ -134,7 +134,7 @@/* SPL */ /* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40400000#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
include/configs/ti_armv7_common.h +1 -1
@@ -198,7 +198,7 @@*/ #if !defined(CONFIG_NOR_BOOT ) && \ !(defined(CONFIG_QSPI_BOOT ) && defined(CONFIG_AM43XX )) -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_OS_BOOT
include/configs/tricorder.h +1 -1
@@ -331,7 +331,7 @@#define CONFIG_SYS_SRAM_SIZE 0x10000/* Defines for SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/tx25.h +1 -1
@@ -21,7 +21,7 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* 256 kB for U-Boot */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048
include/configs/vpac270.h +1 -1
@@ -17,7 +17,7 @@#define CONFIG_SYS_TEXT_BASE 0xa0000000#ifdef CONFIG_ONENAND -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_ONENAND_SUPPORT #define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000#define CONFIG_SPL_ONENAND_LOAD_SIZE \
include/configs/woodburn_sd.h +1 -1
@@ -20,7 +20,7 @@/* * SPL */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds"#define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/x600.h +1 -1
@@ -274,7 +274,7 @@/* * SPL related defines */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_SPL_TEXT_BASE 0xd2800b00#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
include/configs/zynq-common.h +1 -1
@@ -257,7 +257,7 @@#define CONFIG_CMD_TFTPPUT /* SPL part */ -#define CONFIG_SPL +#define CONFIG_SPL 1#define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT
Signature · 1 line
1.9.1
PATCH v8 4/13 include: define CONFIG_SPL and CONFIG_TPL as 1
Quoted 6 lines · Masahiro Yamada
We are about to switch to
Kconfigin the next commit. But there are something to get done beforehand.In
Kconfig,include/generated/autoconf.hdefines boolean CONFIG macros as 1.
Quoted 7 lines
CONFIG_SPLandCONFIG_TPL, if defined, must be set to 1. Otherwise, when switching toKconfig, the build log would be sprinkled with warning messages like this:
warning: "CONFIG_SPL" redefined [enabled by default]Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/1958081b/attachment.pgp>
PATCH v8 5/13 kconfig: switch to Kconfig
In reply to Masahiro YamadaThis commit enables Kconfig.
Going forward, we use Kconfig for the board configuration. mkconfig will never be used. Nor will include/config.mk be generated.
Kconfig must be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.
Usage:
Run "make <board>_defconfig" to do the board configuration.
It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively.
You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one.
Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file.
The generic syntax of configuration targets for SPL, TPL is:
<target_image>/<config_command>
Here, <target_image> is either 'spl' or 'tpl'
<config_command> is 'config', 'menuconfig', 'xconfig', etc.
When the configuration is done, run "make".
(Or "make <board>_defconfig all" will do the configuration and build in one time.)
For futher information of how Kconfig works in U-Boot, please read the comment block of scripts/multiconfig.py.
By the way, there is another item worth remarking here:
coexistence of Kconfig and board herder files.
Prior to Kconfig, we used C headers to define a set of configs.
We expect a very long term to migrate from C headers to Kconfig. Two different infractructure must coexist in the interim.
In our former configuration scheme, include/autoconf.mk was generated for use in makefiles.
It is still generated under include/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively.
---
Changes in v8:
- Add a directory '.' as the first argument of 'find' command as FreeBSD requires it.
(Reported by Jeroen)
Changes in v7:
- Follow PEP8 codiyg style:
Use """blah blah""" rather than '''blah blah''' for docstring. Fix some indents
Add a period of the end of the first line of docstring
- Remove temporary directories '$(objtree)/arch' and '$(objtree)/configs'
Changes in v6:
Various fixes reported by Simon.
- Bug fix
"make spl:config" does not work for out-of-tree build. So, the syntax has been changed to "make spl/config".
- Rename autoconf_is_update -> autoconf_is_current
- Fix comments in scripts/multiconfig.py
- Use
foo: blah blah
instead of
foo - blah blah
for Python comment style.
- Sort Python imports alphabetically
Changes in v5:
- Rebase on commit fbe79a17fd
Changes in v4:
- Have one defconfig file for each board by supporting conditional definition in defconfig
- Put adjustment code into scripts/multiconfig.py
Changes in v3:
- Invoke SPL/TPL configuration only for defconfig and silentoldconfig
Changes in v2:
- Put dirty build rule into scripts/multiple_config.sh and scripts/Makefile.autoconf
- Fix dependency tracking.
In v1, any change to Kconfig triggered re-complile of all objects. In this version, re-compile is kept at a minimum.
- Fix a clean-source check
In v1, clean source tree check did not work correctly for out-of-tree build.
.gitignore | 2 - Makefile | 116 +++++------ arch/m68k/cpu/mcf52x2/config.mk | 16 +- arch/m68k/cpu/mcf532x/config.mk | 6 +- arch/m68k/cpu/mcf5445x/config.mk | 4 +- arch/powerpc/cpu/ppc4xx/config.mk | 4 +- config.mk | 10 + include/.gitignore | 1 - scripts/Makefile | 2 +- scripts/Makefile.autoconf | 100 ++++++++++ scripts/Makefile.build | 31 +-- scripts/Makefile.spl | 31 +-- scripts/basic/fixdep.c | 6 +- scripts/kconfig/confdata.c | 8 + scripts/multiconfig.py | 410 ++++++++++++++++++++++++++++++++++++++ tools/Makefile | 2 +- tools/env/Makefile | 2 +- 17 files changed, 619 insertions(+), 132 deletions(-) create mode 100644 scripts/Makefile.autoconf create mode 100755 scripts/multiconfig.py
.gitignore +0 -2
@@ -53,8 +53,6 @@ # /include/config/ /include/generated/ -/include/spl-autoconf.mk -/include/tpl-autoconf.mk # stgit generated dirs patches-*
Makefile +54 -62
225 lines not on this page · raw message
arch/m68k/cpu/mcf52x2/config.mk +8 -8
@@ -7,14 +7,14 @@ # SPDX-License-Identifier: GPL-2.0+ # -cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') -is5208:=$(shell grep CONFIG_M5208 $(srctree)/include/$(cfg)) -is5249:=$(shell grep CONFIG_M5249 $(srctree)/include/$(cfg)) -is5253:=$(shell grep CONFIG_M5253 $(srctree)/include/$(cfg)) -is5271:=$(shell grep CONFIG_M5271 $(srctree)/include/$(cfg)) -is5272:=$(shell grep CONFIG_M5272 $(srctree)/include/$(cfg)) -is5275:=$(shell grep CONFIG_M5275 $(srctree)/include/$(cfg)) -is5282:=$(shell grep CONFIG_M5282 $(srctree)/include/$(cfg)) +cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h +is5208:=$(shell grep CONFIG_M5208 $(cfg)) +is5249:=$(shell grep CONFIG_M5249 $(cfg)) +is5253:=$(shell grep CONFIG_M5253 $(cfg)) +is5271:=$(shell grep CONFIG_M5271 $(cfg)) +is5272:=$(shell grep CONFIG_M5272 $(cfg)) +is5275:=$(shell grep CONFIG_M5275 $(cfg)) +is5282:=$(shell grep CONFIG_M5282 $(cfg)) ifneq (,$(findstring CONFIG_M5208,$(is5208))) PLATFORM_CPPFLAGS += -mcpu=5208
arch/m68k/cpu/mcf532x/config.mk +3 -3
@@ -7,9 +7,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') -is5301x:=$(shell grep CONFIG_MCF5301x $(srctree)/include/$(cfg)) -is532x:=$(shell grep CONFIG_MCF532x $(srctree)/include/$(cfg)) +cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h +is5301x:=$(shell grep CONFIG_MCF5301x $(cfg)) +is532x:=$(shell grep CONFIG_MCF532x $(cfg)) ifneq (,$(findstring CONFIG_MCF5301x,$(is5301x))) PLATFORM_CPPFLAGS += -mcpu=53015 -fPIC
arch/m68k/cpu/mcf5445x/config.mk +2 -2
@@ -9,8 +9,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') -is5441x:=$(shell grep CONFIG_MCF5441x $(srctree)/include/$(cfg)) +cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h +is5441x:=$(shell grep CONFIG_MCF5441x $(cfg)) ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x))) PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC
arch/powerpc/cpu/ppc4xx/config.mk +2 -2
@@ -7,8 +7,8 @@ PLATFORM_CPPFLAGS += -DCONFIG_4xx -mstring -msoft-float -cfg=$(shell grep configs $(objtree)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') -is440:=$(shell grep CONFIG_440 $(srctree)/include/$(cfg)) +cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h +is440:=$(shell grep CONFIG_440 $(cfg)) ifneq (,$(findstring CONFIG_440,$(is440))) PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
config.mk +10 -0
@@ -20,6 +20,16 @@ LDFLAGS_FINAL := OBJCOPYFLAGS := ######################################################################### +ARCH := $(CONFIG_SYS_ARCH:"%"=%) +CPU := $(CONFIG_SYS_CPU:"%"=%) +BOARD := $(CONFIG_SYS_BOARD:"%"=%) +ifneq ($(CONFIG_SYS_VENDOR),) +VENDOR := $(CONFIG_SYS_VENDOR:"%"=%) +endif +ifneq ($(CONFIG_SYS_SOC),) +SOC := $(CONFIG_SYS_SOC:"%"=%) +endif + # Some architecture config.mk files need to know what CPUDIR is set to, # so calculate CPUDIR before including ARCH/SOC/CPU config.mk files. # Check if arch/$ARCH/cpu/$CPU exists, otherwise assume arch/$ARCH/cpu contains
include/.gitignore +0 -1
@@ -2,4 +2,3 @@ /bmp_logo.h /bmp_logo_data.h /config.h -/config.mk
scripts/Makefile +1 -1
@@ -13,4 +13,4 @@ build_docproc: $(obj)/docproc @: # Let clean descend into subdirs -subdir- += basic +subdir- += basic kconfig
scripts/Makefile.autoconf new file +100 -0
100 lines not on this page · raw message
scripts/Makefile.build +11 -20
@@ -3,14 +3,14 @@ # ========================================================================== # Modified for U-Boot -ifeq ($(CONFIG_TPL_BUILD),y) - src := $(patsubst tpl/%,%,$(obj)) -else - ifeq ($(CONFIG_SPL_BUILD),y) - src := $(patsubst spl/%,%,$(obj)) - else - src := $(obj) - endif +prefix := tpl +src := $(patsubst $(prefix)/%,%,$(obj)) +ifeq ($(obj),$(src)) +prefix := spl +src := $(patsubst $(prefix)/%,%,$(obj)) +ifeq ($(obj),$(src)) +prefix := . +endif endif PHONY := __build
@@ -40,18 +40,9 @@ subdir-asflags-y := subdir-ccflags-y := # Read auto.conf if it exists, otherwise ignore --include include/config/auto.conf - -# Added for U-Boot: Load U-Boot configuration -ifeq ($(CONFIG_TPL_BUILD),y) - -include include/tpl-autoconf.mk -else - ifeq ($(CONFIG_SPL_BUILD),y) - -include include/spl-autoconf.mk - else - -include include/autoconf.mk - endif -endif +# Modified for U-Boot +-include $(prefix)/include/config/auto.conf +-include $(prefix)/include/autoconf.mk include scripts/Kbuild.include
scripts/Makefile.spl +3 -28
@@ -21,13 +21,10 @@ _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj)) include $(srctree)/scripts/Kbuild.include -CONFIG_SPL_BUILD := y -export CONFIG_SPL_BUILD +UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE) -KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD -ifeq ($(CONFIG_TPL_BUILD),y) -KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD -endif +-include $(obj)/include/config/auto.conf +-include $(obj)/include/autoconf.mk ifeq ($(CONFIG_TPL_BUILD),y) export CONFIG_TPL_BUILD
@@ -36,14 +33,6 @@ else SPL_BIN := u-boot-spl endif -include include/config.mk - -ifeq ($(CONFIG_TPL_BUILD),y) - -include include/tpl-autoconf.mk -else - -include include/spl-autoconf.mk -endif - include $(srctree)/config.mk # Enable garbage collection of un-used sections for SPL
@@ -53,20 +42,6 @@ LDFLAGS_FINAL += --gc-sections # FIX ME cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ $(NOSTDINC_FLAGS) -c_flags := $(KBUILD_CFLAGS) $(cpp_flags) - -# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL) -quiet_cmd_autoconf = GEN $@ - cmd_autoconf = \ - $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > [email protected] && \ - sed -n -f $(srctree)/tools/scripts/define2mk.sed [email protected] > $@; \ - rm [email protected] - -include/tpl-autoconf.mk: include/config.h - $(call cmd,autoconf) - -include/spl-autoconf.mk: include/config.h - $(call cmd,autoconf) HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
scripts/basic/fixdep.c +5 -1
@@ -221,7 +221,11 @@ static void use_config(const char *m, int slen)define_config (m, slen, hash); -printf (" $(wildcard include/config/" ); +/* printf(" $(wildcard include/config/"); */ +/* modified for U-Boot */ +printf (" $(wildcard %sinclude/config/" , +strncmp (depfile,"spl/" ,4 ) ? + (strncmp (depfile,"tpl/" ,4 ) ?"" :"tpl/" ) :"spl/" );for (i =0 ; i < slen; i++) { c = m[i];if (c =='_' )
scripts/kconfig/confdata.c +8 -0
@@ -951,6 +951,14 @@ int conf_write_autoconf(void)FILE *out, *tristate, *out_h;int i; +/* +* Added for U-Boot SPL/TPL +*/ + name =getenv ("KCONFIG_OBJDIR" ); +if (name && name[0 ]) +if (chdir (name)) +return 1 ; +sym_clear_all_valid ();file_write_dep ("include/config/auto.conf.cmd" );
scripts/multiconfig.py new file +410 -0
410 lines not on this page · raw message
tools/Makefile +1 -1
@@ -193,7 +193,7 @@ endif # !LOGO_BMP # Define _GNU_SOURCE to obtain the getline prototype from stdio.h # HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \ - $(patsubst -I%,-idirafter%, $(UBOOTINCLUDE)) \ + $(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \ -I$(srctree)/lib/libfdt \ -I$(srctree)/tools \ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
tools/env/Makefile +1 -1
@@ -11,7 +11,7 @@ HOSTCC = $(CC) # Compile for a hosted environment on the target -HOST_EXTRACFLAGS = $(patsubst -I%,-idirafter%, $(UBOOTINCLUDE)) \ +HOST_EXTRACFLAGS = $(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \ -idirafter $(srctree)/tools/env \ -DUSE_HOSTCC \ -DTEXT_BASE=$(TEXT_BASE)
Signature · 1 line
1.9.1
PATCH v8 5/13 kconfig: switch to Kconfig
Quoted 45 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.Usage:
Run "make <board>_defconfig" to do the board configuration.
It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively.
You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one.
Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file.
The generic syntax of configuration targets for SPL, TPL is:
<target_image>/<config_command>
Here, <
target_image> is either 'spl' or 'tpl'
<config_command> is 'config', 'menuconfig', 'xconfig', etc.When the configuration is done, run "make".
(Or "make <board>_defconfig all" will do the configuration and build in one time.)For futher information of how
Kconfigworks in U-Boot, please read the comment block ofscripts/multiconfig.py.By the way, there is another item worth remarking here:
coexistence ofKconfigand board herder files.Prior to
Kconfig, we used C headers to define a set of configs.We expect a very long term to migrate from C headers to
Kconfig. Two different infractructure must coexist in the interim.
Quoted 7 lines
In our former configuration scheme,
include/autoconf.mkwas generated for use in makefiles.
It is still generated underinclude/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/9a40c8e6/attachment.pgp>
PATCH v8 5/13 kconfig: switch to Kconfig
In reply to Masahiro YamadaQuoted 10 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.
Quoted 3 lines
Usage:
Run "make <board>_defconfig" to do the board configuration.
This is quite unfortunate; it breaks any scripts that were building U-Boot via "make <board>_config; make". Can't we add another rule to allow the old build commands to work?
Otherwise, I guess I'll have to hack my scripts to check whether e.g. scripts/multiconfig.py (which was added in this commit) is present in the tree, and execute different build commands based on that...
PATCH v8 5/13 kconfig: switch to Kconfig
Hi Stephen,
Quoted 11 lines · On Wed, 30 Jul 2014 17:05:21 -0600 Stephen Warren <[email protected]> wrote:
Quoted 10 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.
Quoted 5 lines
Quoted 3 lines
Usage:
Run "make <board>_defconfig" to do the board configuration.
This is quite unfortunate; it breaks any scripts that were building U-Boot via "make <board>_config; make". Can't we add another rule to allow the old build commands to work?
Technically, yes. I think we can.
But I do not like having it permanently.
So, we support both *_defconfig and *_config for a while (maybe 6 months or so?) and then remove *_config.
Deal?
Quoted 1 line
Otherwise, I guess I'll have to hack my scripts to check whether e.g.
scripts/multiconfig.py(which was added in this commit) is present in the tree, and execute different build commands based on that...
Do you mean, you need to build some different versions of U-boot ?
Best Regards
Masahiro Yamada
PATCH v8 5/13 kconfig: switch to Kconfig
Quoted 26 lines · Masahiro Yamada
Hi Stephen,
Quoted 11 lines · On Wed, 30 Jul 2014 17:05:21 -0600 Stephen Warren <[email protected]> wrote:
Quoted 10 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.Quoted 5 lines
Quoted 3 lines
Usage:
Run "make <board>_defconfig" to do the board configuration.
This is quite unfortunate; it breaks any scripts that were building U-Boot via "make <board>_config; make". Can't we add another rule to allow the old build commands to work?
Technically, yes. I think we can.
Quoted 7 lines
But I do not like having it permanently.
So, we support both
*_defconfigand*_configfor a while (maybe 6 months or so?) and then remove*_config.Deal?
If the old command-line is ever going to be removed, there's no point supporting both at all; I'd have to hack my scripts to support both sometime, so I may as well do it now rather than wait.
Quoted 4 lines
Quoted 1 line
Otherwise, I guess I'll have to hack my scripts to check whether e.g.
scripts/multiconfig.py(which was added in this commit) is present in the tree, and execute different build commands based on that...Do you mean, you need to build some different versions of U-boot ?
Yes. I own some scripts that build U-Boot, and they need to work on any reasonable version of U-Boot that anyone might want to build. For example, they build 2014.07 just fine, and there's no reason they should ever stop being able to do that. I obviously also want my scripts to be able to build any future version of U-Boot.
PATCH v8 5/13 kconfig: switch to Kconfig
Quoted 42 lines · Stephen Warren
Quoted 26 lines · Masahiro Yamada
Hi Stephen,
Quoted 11 lines · On Wed, 30 Jul 2014 17:05:21 -0600 Stephen Warren <[email protected]> wrote:
Quoted 10 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.Quoted 5 lines
Quoted 3 lines
Usage:
Run "make <board>_defconfig" to do the board configuration.
This is quite unfortunate; it breaks any scripts that were building U-Boot via "make <board>_config; make". Can't we add another rule to allow the old build commands to work?
Technically, yes. I think we can.
Quoted 7 lines
But I do not like having it permanently.
So, we support both
*_defconfigand*_configfor a while (maybe 6 months or so?) and then remove*_config.Deal?
If the old command-line is ever going to be removed, there's no point supporting both at all; I'd have to hack my scripts to support both sometime, so I may as well do it now rather than wait.
Quoted 3 lines
Quoted 1 line
Otherwise, I guess I'll have to hack my scripts to check whether e.g.
scripts/multiconfig.py(which was added in this commit) is present in the tree, and execute different build commands based on that...
Quoted 7 lines
Quoted 1 line
Do you mean, you need to build some different versions of U-boot ?
Yes. I own some scripts that build U-Boot, and they need to work on any reasonable version of U-Boot that anyone might want to build. For example, they build 2014.07 just fine, and there's no reason they should ever stop being able to do that. I obviously also want my scripts to be able to build any future version of U-Boot.
So long as we have MAKEALL (and we'll have the discussion about moving to buildman sometime soon) this just becomes:
if [ -x tools/genboardscfg.py ]; then
tools/genboardscfg.py
fi
MAKEALL machine-name
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140731/4936bf2d/attachment.pgp>
PATCH v8 5/13 kconfig: switch to Kconfig
Quoted 51 lines · Tom Rini
Quoted 42 lines · Stephen Warren
Quoted 26 lines · Masahiro Yamada
Hi Stephen,
Quoted 11 lines · On Wed, 30 Jul 2014 17:05:21 -0600 Stephen Warren <[email protected]> wrote:
Quoted 10 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.Quoted 5 lines
Quoted 3 lines
Usage:
Run "make <board>_defconfig" to do the board configuration.
This is quite unfortunate; it breaks any scripts that were building U-Boot via "make <board>_config; make". Can't we add another rule to allow the old build commands to work?
Technically, yes. I think we can.
Quoted 7 lines
But I do not like having it permanently.
So, we support both
*_defconfigand*_configfor a while (maybe 6 months or so?) and then remove*_config.Deal?
If the old command-line is ever going to be removed, there's no point supporting both at all; I'd have to hack my scripts to support both sometime, so I may as well do it now rather than wait.
Quoted 3 lines
Quoted 1 line
Otherwise, I guess I'll have to hack my scripts to check whether e.g.
scripts/multiconfig.py(which was added in this commit) is present in the tree, and execute different build commands based on that...Quoted 7 lines
Quoted 1 line
Do you mean, you need to build some different versions of U-boot ?
Yes. I own some scripts that build U-Boot, and they need to work on any reasonable version of U-Boot that anyone might want to build. For example, they build 2014.07 just fine, and there's no reason they should ever stop being able to do that. I obviously also want my scripts to be able to build any future version of U-Boot.
Quoted 7 lines
So long as we have MAKEALL (and we'll have the discussion about moving to buildman sometime soon) this just becomes:
if [ -xtools/genboardscfg.py]; then
tools/genboardscfg.py
fiMAKEALL machine-name
There's now a large disadvantage to MAKEALL; it takes longer to run that to build U-Boot itself, since it must auto-generate boards.cfg. Perhaps that's only done once, or when the data changes.
Also, is MAKEALL an/the official way to build U-Boot, or just a useful tool? I have the impression that running "make" is the official way to build U-Boot, but MAKEALL/buildman are useful wrapper tools if you want to do batch builds etc.
PATCH v8 5/13 kconfig: switch to Kconfig
Quoted 66 lines · Stephen Warren
Quoted 65 lines · Tom Rini
Quoted 49 lines · Stephen Warren
Quoted 29 lines · Masahiro Yamada
Hi Stephen,
Quoted 12 lines · On Wed, 30 Jul 2014 17:05:21 -0600 Stephen Warren <[email protected]> wrote:
Quoted 11 lines · Masahiro Yamada
This commit enables
Kconfig.
Going forward, we useKconfigfor the board configuration. mkconfig will never be used. Nor willinclude/config.mkbe generated.
Kconfigmust be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel.
We have to generate multiple boot images (Normal, SPL, TPL) from one source tree.
Each image needs its own configuration input.Quoted 7 lines
Quoted 3 lines
Usage:
Run "make <board>_defconfig" to do the board configuration.
This is quite unfortunate; it breaks any scripts that were building U-Boot via "make <board>_config; make". Can't we add another rule to allow the old build commands to work?
Technically, yes. I think we can.
Quoted 8 lines
But I do not like having it permanently.
So, we support both
*_defconfigand*_configfor a while (maybe 6 months or so?)
and then remove*_config.Deal?
If the old command-line is ever going to be removed, there's no point supporting both at all; I'd have to hack my scripts to support both sometime, so I may as well do it now rather than wait.
Quoted 6 lines
Quoted 4 lines
Otherwise, I guess I'll have to hack my scripts to check whether e.g.
scripts/multiconfig.py(which was added in this commit) is present in the tree, and execute different build commands based on that...Quoted 8 lines
Quoted 1 line
Do you mean, you need to build some different versions of U-boot ?
Yes. I own some scripts that build U-Boot, and they need to work on any reasonable version of U-Boot that anyone might want to build. For example, they build 2014.07 just fine, and there's no reason they should
ever stop being able to do that. I obviously also want my scripts to be able to build any future version of U-Boot.So long as we have MAKEALL (and we'll have the discussion about moving to buildman sometime soon) this just becomes:
if [ -xtools/genboardscfg.py]; then
tools/genboardscfg.py
fi
Quoted 6 lines
Quoted 1 line
MAKEALL machine-name
There's now a large disadvantage to MAKEALL; it takes longer to run that to build U-Boot itself, since it must auto-generate boards.cfg. Perhaps that's only done once, or when the data changes.
there is, it is _terribly_ slow when dealing with warnings in the build. MAKEALL is much
better for that. Replacing the _config rule with _defconfig is just a bad idea afaic.
Regards,
Jeroen
PATCH v8 6/13 Add board MAINTAINERS files
In reply to Masahiro YamadaWe have switched to Kconfig and the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it.
The MAINTAINERS format as in Linux Kernel would be nice because we can crib the scripts/get_maintainer.pl script.
After some discussion, we chose to put a MAINTAINERS file under each board directory, not the top-level one because we want to collect relevant information for a board into a single place.
TODO:
Modify get_maintainer.pl to scan multiple MAINTAINERS files.
---
Changes in v8:
- Regenerate based on commit e1b362f4
+ http://patchwork.ozlabs.org/patch/374526/
Changes in v7:
- Regenerate based on commit 302e609f +
http://patchwork.ozlabs.org/patch/373391/
Changes in v6: None
Changes in v5: None
Changes in v4:
- Newly added
Changes in v3: None
Changes in v2: None
board/8dtech/eco5pk/MAINTAINERS | 6 +++ board/AndesTech/adp-ag101/MAINTAINERS | 6 +++ board/AndesTech/adp-ag101p/MAINTAINERS | 6 +++ board/AndesTech/adp-ag102/MAINTAINERS | 6 +++ board/Barix/ipam390/MAINTAINERS | 6 +++ board/BuR/kwb/MAINTAINERS | 6 +++ board/BuR/tseries/MAINTAINERS | 8 ++++ board/BuS/eb_cpu5282/MAINTAINERS | 7 ++++ board/BuS/eb_cpux9k2/MAINTAINERS | 7 ++++ board/BuS/vl_ma2sc/MAINTAINERS | 7 ++++ board/CarMediaLab/flea3/MAINTAINERS | 6 +++ board/LEOX/elpt860/MAINTAINERS | 6 +++ board/LaCie/edminiv2/MAINTAINERS | 6 +++ board/LaCie/net2big_v2/MAINTAINERS | 11 +++++ board/LaCie/netspace_v2/MAINTAINERS | 14 +++++++ board/LaCie/wireless_space/MAINTAINERS | 6 +++ board/Marvell/aspenite/MAINTAINERS | 6 +++ board/Marvell/db64360/MAINTAINERS | 6 +++ board/Marvell/db64460/MAINTAINERS | 6 +++ board/Marvell/dkb/MAINTAINERS | 6 +++ board/Marvell/dreamplug/MAINTAINERS | 6 +++ board/Marvell/gplugd/MAINTAINERS | 6 +++ board/Marvell/guruplug/MAINTAINERS | 6 +++ board/Marvell/mv88f6281gtw_ge/MAINTAINERS | 6 +++ board/Marvell/openrd/MAINTAINERS | 12 ++++++ board/Marvell/rd6281a/MAINTAINERS | 6 +++ board/Marvell/sheevaplug/MAINTAINERS | 6 +++ board/RRvision/MAINTAINERS | 7 ++++ board/Seagate/dockstar/MAINTAINERS | 6 +++ board/Seagate/goflexhome/MAINTAINERS | 6 +++ board/a3000/MAINTAINERS | 6 +++ board/a3m071/MAINTAINERS | 7 ++++ board/a4m072/MAINTAINERS | 6 +++ board/abilis/tb100/MAINTAINERS | 6 +++ board/afeb9260/MAINTAINERS | 6 +++ board/ait/cam_enc_4xx/MAINTAINERS | 6 +++ board/alphaproject/ap_sh4a_4a/MAINTAINERS | 7 ++++ board/altera/nios2-generic/MAINTAINERS | 6 +++ board/altera/socfpga/MAINTAINERS | 7 ++++ board/amcc/acadia/MAINTAINERS | 6 +++ board/amcc/bamboo/MAINTAINERS | 6 +++ board/amcc/bluestone/MAINTAINERS | 6 +++ board/amcc/bubinga/MAINTAINERS | 6 +++ board/amcc/canyonlands/MAINTAINERS | 8 ++++ board/amcc/ebony/MAINTAINERS | 6 +++ board/amcc/katmai/MAINTAINERS | 6 +++ board/amcc/kilauea/MAINTAINERS | 7 ++++ board/amcc/luan/MAINTAINERS | 6 +++ board/amcc/makalu/MAINTAINERS | 6 +++ board/amcc/ocotea/MAINTAINERS | 6 +++ board/amcc/redwood/MAINTAINERS | 6 +++ board/amcc/sequoia/MAINTAINERS | 9 +++++ board/amcc/taihu/MAINTAINERS | 6 +++ board/amcc/taishan/MAINTAINERS | 6 +++ board/amcc/walnut/MAINTAINERS | 7 ++++ board/amcc/yosemite/MAINTAINERS | 7 ++++ board/amcc/yucca/MAINTAINERS | 6 +++ board/armadeus/apf27/MAINTAINERS | 7 ++++ board/armltd/integrator/MAINTAINERS | 14 +++++++ board/armltd/versatile/MAINTAINERS | 8 ++++ board/armltd/vexpress/MAINTAINERS | 14 +++++++ board/armltd/vexpress64/MAINTAINERS | 11 +++++ board/astro/mcf5373l/MAINTAINERS | 6 +++ board/atc/MAINTAINERS | 6 +++ board/atmark-techno/armadillo-800eva/MAINTAINERS | 6 +++ board/atmel/at91rm9200ek/MAINTAINERS | 7 ++++ board/atmel/at91sam9260ek/MAINTAINERS | 16 ++++++++ board/atmel/at91sam9261ek/MAINTAINERS | 11 +++++ board/atmel/at91sam9263ek/MAINTAINERS | 10 +++++ board/atmel/at91sam9m10g45ek/MAINTAINERS | 7 ++++ board/atmel/at91sam9n12ek/MAINTAINERS | 8 ++++ board/atmel/at91sam9rlek/MAINTAINERS | 7 ++++ board/atmel/at91sam9x5ek/MAINTAINERS | 9 +++++ board/atmel/atngw100/MAINTAINERS | 6 +++ board/atmel/atngw100mkii/MAINTAINERS | 6 +++ board/atmel/atstk1000/MAINTAINERS | 12 ++++++ board/atmel/sama5d3_xplained/MAINTAINERS | 7 ++++ board/atmel/sama5d3xek/MAINTAINERS | 8 ++++ board/avionic-design/medcom-wide/MAINTAINERS | 6 +++ board/avionic-design/plutux/MAINTAINERS | 6 +++ board/avionic-design/tec-ng/MAINTAINERS | 6 +++ board/avionic-design/tec/MAINTAINERS | 6 +++ board/avnet/fx12mm/MAINTAINERS | 7 ++++ board/avnet/v5fx30teval/MAINTAINERS | 7 ++++ board/balloon3/MAINTAINERS | 6 +++ board/barco/titanium/MAINTAINERS | 6 +++ board/bc3450/MAINTAINERS | 6 +++ board/bct-brettl2/MAINTAINERS | 6 +++ board/bf506f-ezkit/MAINTAINERS | 6 +++ board/bf518f-ezbrd/MAINTAINERS | 6 +++ board/bf525-ucr2/MAINTAINERS | 7 ++++ board/bf526-ezbrd/MAINTAINERS | 6 +++ board/bf527-ad7160-eval/MAINTAINERS | 6 +++ board/bf527-ezkit/MAINTAINERS | 7 ++++ board/bf527-sdp/MAINTAINERS | 6 +++ board/bf533-ezkit/MAINTAINERS | 6 +++ board/bf533-stamp/MAINTAINERS | 6 +++ board/bf537-minotaur/MAINTAINERS | 6 +++ board/bf537-pnav/MAINTAINERS | 6 +++ board/bf537-srv1/MAINTAINERS | 6 +++ board/bf537-stamp/MAINTAINERS | 6 +++ board/bf538f-ezkit/MAINTAINERS | 6 +++ board/bf548-ezkit/MAINTAINERS | 6 +++ board/bf561-acvilon/MAINTAINERS | 6 +++ board/bf561-ezkit/MAINTAINERS | 6 +++ board/bf609-ezkit/MAINTAINERS | 6 +++ board/blackstamp/MAINTAINERS | 8 ++++ board/blackvme/MAINTAINERS | 8 ++++ board/bluegiga/apx4devkit/MAINTAINERS | 6 +++ board/bluewater/snapper9260/MAINTAINERS | 7 ++++ board/boundary/nitrogen6x/MAINTAINERS | 12 ++++++ board/br4/MAINTAINERS | 6 +++ board/broadcom/bcm28155_ap/MAINTAINERS | 6 +++ board/buffalo/lsxl/MAINTAINERS | 7 ++++ board/calao/sbc35_a9g20/MAINTAINERS | 7 ++++ board/calao/tny_a9260/MAINTAINERS | 9 +++++ board/calao/usb_a9263/MAINTAINERS | 6 +++ board/canmb/MAINTAINERS | 6 +++ board/chromebook-x86/coreboot/MAINTAINERS | 6 +++ board/cirrus/edb93xx/MAINTAINERS | 6 +++ board/cloudengines/pogo_e02/MAINTAINERS | 6 +++ board/cm-bf527/MAINTAINERS | 6 +++ board/cm-bf533/MAINTAINERS | 6 +++ board/cm-bf537e/MAINTAINERS | 6 +++ board/cm-bf537u/MAINTAINERS | 6 +++ board/cm-bf548/MAINTAINERS | 6 +++ board/cm-bf561/MAINTAINERS | 6 +++ board/cm4008/MAINTAINERS | 6 +++ board/cm41xx/MAINTAINERS | 6 +++ board/cm5200/MAINTAINERS | 6 +++ board/cmi/MAINTAINERS | 6 +++ board/cobra5272/MAINTAINERS | 6 +++ board/cogent/MAINTAINERS | 8 ++++ board/comelit/dig297/MAINTAINERS | 6 +++ board/compal/paz00/MAINTAINERS | 7 ++++ board/compulab/cm_t335/MAINTAINERS | 6 +++ board/compulab/cm_t35/MAINTAINERS | 6 +++ board/compulab/cm_t54/MAINTAINERS | 6 +++ board/compulab/trimslice/MAINTAINERS | 7 ++++ board/congatec/cgtqmx6eval/MAINTAINERS | 6 +++ board/corscience/tricorder/MAINTAINERS | 7 ++++ board/cpc45/MAINTAINERS | 7 ++++ board/cpu86/MAINTAINERS | 7 ++++ board/cpu87/MAINTAINERS | 7 ++++ board/cray/L1/MAINTAINERS | 6 +++ board/creative/xfi3/MAINTAINERS | 6 +++ board/csb272/MAINTAINERS | 6 +++ board/csb472/MAINTAINERS | 6 +++ board/cu824/MAINTAINERS | 6 +++ board/d-link/dns325/MAINTAINERS | 6 +++ board/dave/PPChameleonEVB/MAINTAINERS | 20 ++++++++++ board/davedenx/aria/MAINTAINERS | 6 +++ board/davedenx/qong/MAINTAINERS | 6 +++ board/davinci/da8xxevm/MAINTAINERS | 22 ++++++++++ board/davinci/dm355evm/MAINTAINERS | 6 +++ board/davinci/dm355leopard/MAINTAINERS | 6 +++ board/davinci/dm365evm/MAINTAINERS | 6 +++ board/davinci/dm6467evm/MAINTAINERS | 7 ++++ board/davinci/dvevm/MAINTAINERS | 6 +++ board/davinci/ea20/MAINTAINERS | 6 +++ board/davinci/schmoogie/MAINTAINERS | 6 +++ board/davinci/sffsdr/MAINTAINERS | 6 +++ board/davinci/sonata/MAINTAINERS | 6 +++ board/dbau1x00/MAINTAINERS | 10 +++++ board/denx/m28evk/MAINTAINERS | 6 +++ board/denx/m53evk/MAINTAINERS | 6 +++ board/dnp5370/MAINTAINERS | 6 +++ board/eXalion/MAINTAINERS | 6 +++ board/earthlcd/favr-32-ezkit/MAINTAINERS | 6 +++ board/egnite/ethernut5/MAINTAINERS | 6 +++ board/eltec/elppc/MAINTAINERS | 6 +++ board/eltec/mhpc/MAINTAINERS | 6 +++ board/embest/mx6boards/MAINTAINERS | 7 ++++ board/emk/top5200/MAINTAINERS | 8 ++++ board/emk/top860/MAINTAINERS | 6 +++ board/emk/top9000/MAINTAINERS | 7 ++++ board/enbw/enbw_cmc/MAINTAINERS | 6 +++ board/ep8260/MAINTAINERS | 6 +++ board/ep82xxm/MAINTAINERS | 6 +++ board/esd/apc405/MAINTAINERS | 6 +++ board/esd/ar405/MAINTAINERS | 6 +++ board/esd/ash405/MAINTAINERS | 6 +++ board/esd/cms700/MAINTAINERS | 6 +++ board/esd/cpci2dp/MAINTAINERS | 6 +++ board/esd/cpci405/MAINTAINERS | 12 ++++++ board/esd/cpci5200/MAINTAINERS | 6 +++ board/esd/cpci750/MAINTAINERS | 6 +++ board/esd/cpciiser4/MAINTAINERS | 6 +++ board/esd/dp405/MAINTAINERS | 6 +++ board/esd/du405/MAINTAINERS | 6 +++ board/esd/du440/MAINTAINERS | 6 +++ board/esd/hh405/MAINTAINERS | 6 +++ board/esd/hub405/MAINTAINERS | 6 +++ board/esd/mecp5123/MAINTAINERS | 6 +++ board/esd/mecp5200/MAINTAINERS | 6 +++ board/esd/meesc/MAINTAINERS | 7 ++++ board/esd/ocrtc/MAINTAINERS | 6 +++ board/esd/otc570/MAINTAINERS | 7 ++++ board/esd/pci405/MAINTAINERS | 6 +++ board/esd/pf5200/MAINTAINERS | 6 +++ board/esd/plu405/MAINTAINERS | 6 +++ board/esd/pmc405/MAINTAINERS | 6 +++ board/esd/pmc405de/MAINTAINERS | 6 +++ board/esd/pmc440/MAINTAINERS | 6 +++ board/esd/tasreg/MAINTAINERS | 6 +++ board/esd/vme8349/MAINTAINERS | 7 ++++ board/esd/voh405/MAINTAINERS | 6 +++ board/esd/vom405/MAINTAINERS | 6 +++ board/esd/wuh405/MAINTAINERS | 6 +++ board/esg/ima3-mx53/MAINTAINERS | 6 +++ board/espt/MAINTAINERS | 6 +++ board/esteem192e/MAINTAINERS | 6 +++ board/eukrea/cpu9260/MAINTAINERS | 13 ++++++ board/eukrea/cpuat91/MAINTAINERS | 7 ++++ board/evb64260/MAINTAINERS | 12 ++++++ board/exmeritus/hww1u1a/MAINTAINERS | 6 +++ board/faraday/a320evb/MAINTAINERS | 6 +++ board/flagadm/MAINTAINERS | 6 +++ board/freescale/b4860qds/MAINTAINERS | 17 ++++++++ board/freescale/bsc9131rdb/MAINTAINERS | 9 +++++ board/freescale/bsc9132qds/MAINTAINERS | 25 ++++++++++++ board/freescale/c29xpcie/MAINTAINERS | 8 ++++ board/freescale/corenet_ds/MAINTAINERS | 29 ++++++++++++++ board/freescale/ls2085a/MAINTAINERS | 9 +++++ board/freescale/m5208evbe/MAINTAINERS | 6 +++ board/freescale/m52277evb/MAINTAINERS | 7 ++++ board/freescale/m5235evb/MAINTAINERS | 7 ++++ board/freescale/m5249evb/MAINTAINERS | 6 +++ board/freescale/m5253demo/MAINTAINERS | 6 +++ board/freescale/m5253evbe/MAINTAINERS | 6 +++ board/freescale/m5272c3/MAINTAINERS | 6 +++ board/freescale/m5275evb/MAINTAINERS | 6 +++ board/freescale/m5282evb/MAINTAINERS | 6 +++ board/freescale/m53017evb/MAINTAINERS | 6 +++ board/freescale/m5329evb/MAINTAINERS | 7 ++++ board/freescale/m5373evb/MAINTAINERS | 6 +++ board/freescale/m54418twr/MAINTAINERS | 11 +++++ board/freescale/m54451evb/MAINTAINERS | 7 ++++ board/freescale/m54455evb/MAINTAINERS | 10 +++++ board/freescale/m547xevb/MAINTAINERS | 12 ++++++ board/freescale/m548xevb/MAINTAINERS | 13 ++++++ board/freescale/mpc5121ads/MAINTAINERS | 7 ++++ board/freescale/mpc7448hpc2/MAINTAINERS | 6 +++ board/freescale/mpc8266ads/MAINTAINERS | 6 +++ board/freescale/mpc8308rdb/MAINTAINERS | 6 +++ board/freescale/mpc8313erdb/MAINTAINERS | 9 +++++ board/freescale/mpc8315erdb/MAINTAINERS | 6 +++ board/freescale/mpc8323erdb/MAINTAINERS | 6 +++ board/freescale/mpc832xemds/MAINTAINERS | 10 +++++ board/freescale/mpc8349emds/MAINTAINERS | 6 +++ board/freescale/mpc8349itx/MAINTAINERS | 8 ++++ board/freescale/mpc8360emds/MAINTAINERS | 15 +++++++ board/freescale/mpc8360erdk/MAINTAINERS | 7 ++++ board/freescale/mpc837xemds/MAINTAINERS | 7 ++++ board/freescale/mpc837xerdb/MAINTAINERS | 6 +++ board/freescale/mpc8536ds/MAINTAINERS | 9 +++++ board/freescale/mpc8540ads/MAINTAINERS | 6 +++ board/freescale/mpc8541cds/MAINTAINERS | 7 ++++ board/freescale/mpc8544ds/MAINTAINERS | 6 +++ board/freescale/mpc8548cds/MAINTAINERS | 8 ++++ board/freescale/mpc8555cds/MAINTAINERS | 7 ++++ board/freescale/mpc8560ads/MAINTAINERS | 6 +++ board/freescale/mpc8568mds/MAINTAINERS | 6 +++ board/freescale/mpc8569mds/MAINTAINERS | 7 ++++ board/freescale/mpc8572ds/MAINTAINERS | 7 ++++ board/freescale/mpc8610hpcd/MAINTAINERS | 6 +++ board/freescale/mpc8641hpcn/MAINTAINERS | 7 ++++ board/freescale/mx23evk/MAINTAINERS | 6 +++ board/freescale/mx25pdk/MAINTAINERS | 6 +++ board/freescale/mx28evk/MAINTAINERS | 9 +++++ board/freescale/mx31ads/MAINTAINERS | 6 +++ board/freescale/mx31pdk/MAINTAINERS | 6 +++ board/freescale/mx35pdk/MAINTAINERS | 6 +++ board/freescale/mx51evk/MAINTAINERS | 6 +++ board/freescale/mx53ard/MAINTAINERS | 6 +++ board/freescale/mx53evk/MAINTAINERS | 6 +++ board/freescale/mx53loco/MAINTAINERS | 6 +++ board/freescale/mx53smd/MAINTAINERS | 6 +++ board/freescale/mx6qarm2/MAINTAINERS | 6 +++ board/freescale/mx6qsabreauto/MAINTAINERS | 7 ++++ board/freescale/mx6sabresd/MAINTAINERS | 7 ++++ board/freescale/mx6slevk/MAINTAINERS | 6 +++ board/freescale/p1010rdb/MAINTAINERS | 33 +++++++++++++++ board/freescale/p1022ds/MAINTAINERS | 13 ++++++ board/freescale/p1023rdb/MAINTAINERS | 6 +++ board/freescale/p1_p2_rdb/MAINTAINERS | 37 +++++++++++++++++ board/freescale/p1_p2_rdb_pc/MAINTAINERS | 51 ++++++++++++++++++++++++ board/freescale/p1_twr/MAINTAINERS | 6 +++ board/freescale/p2020come/MAINTAINERS | 7 ++++ board/freescale/p2020ds/MAINTAINERS | 10 +++++ board/freescale/p2041rdb/MAINTAINERS | 11 +++++ board/freescale/qemu-ppce500/MAINTAINERS | 6 +++ board/freescale/t1040qds/MAINTAINERS | 12 ++++++ board/freescale/t104xrdb/MAINTAINERS | 22 ++++++++++ board/freescale/t208xqds/MAINTAINERS | 20 ++++++++++ board/freescale/t208xrdb/MAINTAINERS | 15 +++++++ board/freescale/t4qds/MAINTAINERS | 26 ++++++++++++ board/freescale/t4rdb/MAINTAINERS | 7 ++++ board/freescale/vf610twr/MAINTAINERS | 6 +++ board/funkwerk/vovpn-gw/MAINTAINERS | 6 +++ board/g2000/MAINTAINERS | 6 +++ board/gaisler/gr_cpci_ax2000/MAINTAINERS | 6 +++ board/gaisler/gr_ep2s60/MAINTAINERS | 6 +++ board/gaisler/gr_xc3s_1500/MAINTAINERS | 6 +++ board/gaisler/grsim/MAINTAINERS | 6 +++ board/gaisler/grsim_leon2/MAINTAINERS | 6 +++ board/galaxy5200/MAINTAINERS | 7 ++++ board/gateworks/gw_ventana/MAINTAINERS | 6 +++ board/gdsys/405ep/MAINTAINERS | 12 ++++++ board/gdsys/405ex/MAINTAINERS | 6 +++ board/gdsys/dlvision/MAINTAINERS | 6 +++ board/gdsys/gdppc440etx/MAINTAINERS | 6 +++ board/gdsys/intip/MAINTAINERS | 7 ++++ board/gdsys/p1022/MAINTAINERS | 9 +++++ board/gen860t/MAINTAINERS | 7 ++++ board/genesi/mx51_efikamx/MAINTAINERS | 7 ++++ board/gumstix/duovero/MAINTAINERS | 6 +++ board/gumstix/pepper/MAINTAINERS | 6 +++ board/gw8260/MAINTAINERS | 6 +++ board/h2200/MAINTAINERS | 6 +++ board/hale/tt01/MAINTAINERS | 6 +++ board/hermes/MAINTAINERS | 6 +++ board/highbank/MAINTAINERS | 6 +++ board/htkw/mcx/MAINTAINERS | 6 +++ board/hymod/MAINTAINERS | 6 +++ board/ibf-dsp561/MAINTAINERS | 6 +++ board/icecube/MAINTAINERS | 21 ++++++++++ board/icpdas/lp8x4x/MAINTAINERS | 6 +++ board/icu862/MAINTAINERS | 7 ++++ board/ids/ids8247/MAINTAINERS | 6 +++ board/ids/ids8313/MAINTAINERS | 6 +++ board/ifm/ac14xx/MAINTAINERS | 6 +++ board/ifm/o2dnt2/MAINTAINERS | 20 ++++++++++ board/imgtec/malta/MAINTAINERS | 7 ++++ board/imx31_phycore/MAINTAINERS | 11 +++++ board/in-circuit/grasshopper/MAINTAINERS | 6 +++ board/inka4x0/MAINTAINERS | 6 +++ board/intercontrol/digsy_mtc/MAINTAINERS | 9 +++++ board/iomega/iconnect/MAINTAINERS | 6 +++ board/ip04/MAINTAINERS | 6 +++ board/ip860/MAINTAINERS | 6 +++ board/ipek01/MAINTAINERS | 6 +++ board/iphase4539/MAINTAINERS | 6 +++ board/isee/igep0033/MAINTAINERS | 6 +++ board/isee/igep00x0/MAINTAINERS | 14 +++++++ board/ivm/MAINTAINERS | 12 ++++++ board/jornada/MAINTAINERS | 6 +++ board/jse/MAINTAINERS | 6 +++ board/jupiter/MAINTAINERS | 6 +++ board/karo/tk71/MAINTAINERS | 6 +++ board/karo/tx25/MAINTAINERS | 6 +++ board/keymile/km82xx/MAINTAINERS | 7 ++++ board/keymile/km83xx/MAINTAINERS | 19 +++++++++ board/keymile/km_arm/MAINTAINERS | 14 +++++++ board/keymile/kmp204x/MAINTAINERS | 7 ++++ board/kmc/kzm9g/MAINTAINERS | 7 ++++ board/korat/MAINTAINERS | 7 ++++ board/kup/kup4k/MAINTAINERS | 6 +++ board/kup/kup4x/MAINTAINERS | 6 +++ board/logicpd/am3517evm/MAINTAINERS | 6 +++ board/logicpd/imx27lite/MAINTAINERS | 12 ++++++ board/logicpd/imx31_litekit/MAINTAINERS | 6 +++ board/logicpd/omap3som/MAINTAINERS | 6 +++ board/logicpd/zoom1/MAINTAINERS | 6 +++ board/lwmon/MAINTAINERS | 6 +++ board/lwmon5/MAINTAINERS | 7 ++++ board/manroland/hmi1001/MAINTAINERS | 6 +++ board/manroland/mucmc52/MAINTAINERS | 6 +++ board/manroland/uc100/MAINTAINERS | 6 +++ board/manroland/uc101/MAINTAINERS | 6 +++ board/matrix_vision/mergerbox/MAINTAINERS | 6 +++ board/matrix_vision/mvbc_p/MAINTAINERS | 6 +++ board/matrix_vision/mvblm7/MAINTAINERS | 6 +++ board/matrix_vision/mvblx/MAINTAINERS | 6 +++ board/matrix_vision/mvsmr/MAINTAINERS | 6 +++ board/mcc200/MAINTAINERS | 17 ++++++++ board/micronas/vct/MAINTAINERS | 17 ++++++++ board/mimc/mimc200/MAINTAINERS | 6 +++ board/miromico/hammerhead/MAINTAINERS | 6 +++ board/mosaixtech/icon/MAINTAINERS | 6 +++ board/motionpro/MAINTAINERS | 6 +++ board/mpc8308_p1m/MAINTAINERS | 6 +++ board/mpl/mip405/MAINTAINERS | 7 ++++ board/mpl/pati/MAINTAINERS | 6 +++ board/mpl/pip405/MAINTAINERS | 6 +++ board/mpl/vcma9/MAINTAINERS | 6 +++ board/mpr2/MAINTAINERS | 6 +++ board/ms7720se/MAINTAINERS | 6 +++ board/ms7722se/MAINTAINERS | 7 ++++ board/ms7750se/MAINTAINERS | 7 ++++ board/muas3001/MAINTAINERS | 7 ++++ board/munices/MAINTAINERS | 6 +++ board/musenki/MAINTAINERS | 6 +++ board/mvblue/MAINTAINERS | 6 +++ board/netvia/MAINTAINERS | 7 ++++ board/nokia/rx51/MAINTAINERS | 6 +++ board/nvidia/beaver/MAINTAINERS | 7 ++++ board/nvidia/cardhu/MAINTAINERS | 6 +++ board/nvidia/dalmore/MAINTAINERS | 6 +++ board/nvidia/harmony/MAINTAINERS | 6 +++ board/nvidia/jetson-tk1/MAINTAINERS | 6 +++ board/nvidia/seaboard/MAINTAINERS | 6 +++ board/nvidia/venice2/MAINTAINERS | 6 +++ board/nvidia/ventana/MAINTAINERS | 7 ++++ board/nvidia/whistler/MAINTAINERS | 7 ++++ board/olimex/mx23_olinuxino/MAINTAINERS | 6 +++ board/omicron/calimain/MAINTAINERS | 7 ++++ board/openrisc/openrisc-generic/MAINTAINERS | 6 +++ board/overo/MAINTAINERS | 6 +++ board/palmld/MAINTAINERS | 6 +++ board/palmtc/MAINTAINERS | 6 +++ board/palmtreo680/MAINTAINERS | 6 +++ board/pandora/MAINTAINERS | 6 +++ board/pb1x00/MAINTAINERS | 6 +++ board/pcs440ep/MAINTAINERS | 6 +++ board/pdm360ng/MAINTAINERS | 6 +++ board/phytec/pcm030/MAINTAINERS | 7 ++++ board/phytec/pcm051/MAINTAINERS | 7 ++++ board/pm520/MAINTAINERS | 9 +++++ board/pm826/MAINTAINERS | 13 ++++++ board/pm828/MAINTAINERS | 9 +++++ board/ppcag/bg0900/MAINTAINERS | 6 +++ board/ppmc7xx/MAINTAINERS | 6 +++ board/ppmc8260/MAINTAINERS | 6 +++ board/pr1/MAINTAINERS | 6 +++ board/prodrive/alpr/MAINTAINERS | 6 +++ board/prodrive/p3mx/MAINTAINERS | 7 ++++ board/prodrive/p3p440/MAINTAINERS | 6 +++ board/psyent/pci5441/MAINTAINERS | 6 +++ board/psyent/pk1c20/MAINTAINERS | 6 +++ board/pxa255_idp/MAINTAINERS | 6 +++ board/qemu-mips/MAINTAINERS | 14 +++++++ board/r360mpi/MAINTAINERS | 6 +++ board/raidsonic/ib62x0/MAINTAINERS | 6 +++ board/raspberrypi/rpi_b/MAINTAINERS | 6 +++ board/renesas/MigoR/MAINTAINERS | 6 +++ board/renesas/alt/MAINTAINERS | 6 +++ board/renesas/ap325rxa/MAINTAINERS | 7 ++++ board/renesas/ecovec/MAINTAINERS | 7 ++++ board/renesas/koelsch/MAINTAINERS | 6 +++ board/renesas/lager/MAINTAINERS | 6 +++ board/renesas/r0p7734/MAINTAINERS | 7 ++++ board/renesas/r2dplus/MAINTAINERS | 7 ++++ board/renesas/r7780mp/MAINTAINERS | 7 ++++ board/renesas/rsk7203/MAINTAINERS | 7 ++++ board/renesas/rsk7264/MAINTAINERS | 6 +++ board/renesas/rsk7269/MAINTAINERS | 6 +++ board/renesas/sh7752evb/MAINTAINERS | 6 +++ board/renesas/sh7753evb/MAINTAINERS | 6 +++ board/renesas/sh7757lcr/MAINTAINERS | 6 +++ board/renesas/sh7763rdp/MAINTAINERS | 7 ++++ board/renesas/sh7785lcr/MAINTAINERS | 7 ++++ board/ronetix/pm9261/MAINTAINERS | 6 +++ board/ronetix/pm9263/MAINTAINERS | 6 +++ board/ronetix/pm9g45/MAINTAINERS | 6 +++ board/sacsng/MAINTAINERS | 6 +++ board/samsung/arndale/MAINTAINERS | 6 +++ board/samsung/goni/MAINTAINERS | 6 +++ board/samsung/origen/MAINTAINERS | 6 +++ board/samsung/smdk2410/MAINTAINERS | 6 +++ board/samsung/smdk5250/MAINTAINERS | 12 ++++++ board/samsung/smdk5420/MAINTAINERS | 12 ++++++ board/samsung/smdkc100/MAINTAINERS | 6 +++ board/samsung/smdkv310/MAINTAINERS | 6 +++ board/samsung/trats/MAINTAINERS | 6 +++ board/samsung/trats2/MAINTAINERS | 6 +++ board/samsung/universal_c210/MAINTAINERS | 6 +++ board/sandbox/MAINTAINERS | 6 +++ board/sandburst/karef/MAINTAINERS | 6 +++ board/sandburst/metrobox/MAINTAINERS | 6 +++ board/sandisk/sansa_fuze_plus/MAINTAINERS | 6 +++ board/sandpoint/MAINTAINERS | 12 ++++++ board/sbc405/MAINTAINERS | 6 +++ board/sbc8349/MAINTAINERS | 8 ++++ board/sbc8548/MAINTAINERS | 10 +++++ board/sbc8641d/MAINTAINERS | 6 +++ board/sc3/MAINTAINERS | 6 +++ board/scb9328/MAINTAINERS | 6 +++ board/schulercontrol/sc_sps_1/MAINTAINERS | 6 +++ board/shmin/MAINTAINERS | 7 ++++ board/siemens/corvus/MAINTAINERS | 6 +++ board/siemens/draco/MAINTAINERS | 8 ++++ board/siemens/pxm2/MAINTAINERS | 6 +++ board/siemens/rut/MAINTAINERS | 6 +++ board/siemens/taurus/MAINTAINERS | 7 ++++ board/silica/pengwyn/MAINTAINERS | 6 +++ board/sixnet/MAINTAINERS | 6 +++ board/socrates/MAINTAINERS | 6 +++ board/solidrun/hummingboard/MAINTAINERS | 6 +++ board/spd8xx/MAINTAINERS | 6 +++ board/spear/spear300/MAINTAINERS | 13 ++++++ board/spear/spear310/MAINTAINERS | 15 +++++++ board/spear/spear320/MAINTAINERS | 15 +++++++ board/spear/spear600/MAINTAINERS | 13 ++++++ board/spear/x600/MAINTAINERS | 6 +++ board/st-ericsson/snowball/MAINTAINERS | 6 +++ board/st-ericsson/u8500/MAINTAINERS | 6 +++ board/st/nhk8815/MAINTAINERS | 8 ++++ board/stx/stxgp3/MAINTAINERS | 6 +++ board/stx/stxssa/MAINTAINERS | 7 ++++ board/stx/stxxtc/MAINTAINERS | 6 +++ board/sunxi/MAINTAINERS | 19 +++++++++ board/svm_sc8xx/MAINTAINERS | 6 +++ board/synopsys/MAINTAINERS | 7 ++++ board/synopsys/axs101/MAINTAINERS | 6 +++ board/syteco/jadecpu/MAINTAINERS | 6 +++ board/syteco/zmx25/MAINTAINERS | 6 +++ board/t3corp/MAINTAINERS | 6 +++ board/taskit/stamp9g20/MAINTAINERS | 7 ++++ board/tcm-bf518/MAINTAINERS | 6 +++ board/tcm-bf537/MAINTAINERS | 6 +++ board/technexion/tao3530/MAINTAINERS | 11 +++++ board/technexion/twister/MAINTAINERS | 6 +++ board/teejet/mt_ventoux/MAINTAINERS | 6 +++ board/ti/am335x/MAINTAINERS | 17 ++++++++ board/ti/am3517crane/MAINTAINERS | 6 +++ board/ti/am43xx/MAINTAINERS | 7 ++++ board/ti/beagle/MAINTAINERS | 6 +++ board/ti/dra7xx/MAINTAINERS | 8 ++++ board/ti/evm/MAINTAINERS | 14 +++++++ board/ti/ks2_evm/MAINTAINERS | 8 ++++ board/ti/omap5912osk/MAINTAINERS | 6 +++ board/ti/omap5_uevm/MAINTAINERS | 6 +++ board/ti/panda/MAINTAINERS | 6 +++ board/ti/sdp3430/MAINTAINERS | 6 +++ board/ti/sdp4430/MAINTAINERS | 6 +++ board/ti/ti814x/MAINTAINERS | 6 +++ board/ti/ti816x/MAINTAINERS | 6 +++ board/ti/tnetv107xevm/MAINTAINERS | 6 +++ board/timll/devkit3250/MAINTAINERS | 6 +++ board/timll/devkit8000/MAINTAINERS | 6 +++ board/toradex/colibri_pxa270/MAINTAINERS | 6 +++ board/toradex/colibri_t20_iris/MAINTAINERS | 6 +++ board/total5200/MAINTAINERS | 9 +++++ board/tqc/tqm5200/MAINTAINERS | 26 ++++++++++++ board/tqc/tqm8260/MAINTAINERS | 16 ++++++++ board/tqc/tqm8272/MAINTAINERS | 6 +++ board/tqc/tqm834x/MAINTAINERS | 6 +++ board/tqc/tqm8xx/MAINTAINERS | 47 ++++++++++++++++++++++ board/trizepsiv/MAINTAINERS | 7 ++++ board/ttcontrol/vision2/MAINTAINERS | 6 +++ board/udoo/MAINTAINERS | 6 +++ board/utx8245/MAINTAINERS | 6 +++ board/v38b/MAINTAINERS | 6 +++ board/ve8313/MAINTAINERS | 6 +++ board/vpac270/MAINTAINERS | 8 ++++ board/w7o/MAINTAINERS | 8 ++++ board/wandboard/MAINTAINERS | 8 ++++ board/woodburn/MAINTAINERS | 12 ++++++ board/xaeniax/MAINTAINERS | 6 +++ board/xes/xpedite1000/MAINTAINERS | 6 +++ board/xes/xpedite517x/MAINTAINERS | 6 +++ board/xes/xpedite520x/MAINTAINERS | 6 +++ board/xes/xpedite537x/MAINTAINERS | 6 +++ board/xes/xpedite550x/MAINTAINERS | 6 +++ board/xilinx/microblaze-generic/MAINTAINERS | 6 +++ board/xilinx/ml507/MAINTAINERS | 7 ++++ board/xilinx/ppc405-generic/MAINTAINERS | 7 ++++ board/xilinx/ppc440-generic/MAINTAINERS | 7 ++++ board/xilinx/zynq/MAINTAINERS | 15 +++++++ board/zeus/MAINTAINERS | 6 +++ board/zipitz2/MAINTAINERS | 6 +++ 562 files changed, 4234 insertions(+) create mode 100644 board/8dtech/eco5pk/MAINTAINERS create mode 100644 board/AndesTech/adp-ag101/MAINTAINERS create mode 100644 board/AndesTech/adp-ag101p/MAINTAINERS create mode 100644 board/AndesTech/adp-ag102/MAINTAINERS create mode 100644 board/Barix/ipam390/MAINTAINERS create mode 100644 board/BuR/kwb/MAINTAINERS create mode 100644 board/BuR/tseries/MAINTAINERS create mode 100644 board/BuS/eb_cpu5282/MAINTAINERS create mode 100644 board/BuS/eb_cpux9k2/MAINTAINERS create mode 100644 board/BuS/vl_ma2sc/MAINTAINERS create mode 100644 board/CarMediaLab/flea3/MAINTAINERS create mode 100644 board/LEOX/elpt860/MAINTAINERS create mode 100644 board/LaCie/edminiv2/MAINTAINERS create mode 100644 board/LaCie/net2big_v2/MAINTAINERS create mode 100644 board/LaCie/netspace_v2/MAINTAINERS create mode 100644 board/LaCie/wireless_space/MAINTAINERS create mode 100644 board/Marvell/aspenite/MAINTAINERS create mode 100644 board/Marvell/db64360/MAINTAINERS create mode 100644 board/Marvell/db64460/MAINTAINERS create mode 100644 board/Marvell/dkb/MAINTAINERS create mode 100644 board/Marvell/dreamplug/MAINTAINERS create mode 100644 board/Marvell/gplugd/MAINTAINERS create mode 100644 board/Marvell/guruplug/MAINTAINERS create mode 100644 board/Marvell/mv88f6281gtw_ge/MAINTAINERS create mode 100644 board/Marvell/openrd/MAINTAINERS create mode 100644 board/Marvell/rd6281a/MAINTAINERS create mode 100644 board/Marvell/sheevaplug/MAINTAINERS create mode 100644 board/RRvision/MAINTAINERS create mode 100644 board/Seagate/dockstar/MAINTAINERS create mode 100644 board/Seagate/goflexhome/MAINTAINERS create mode 100644 board/a3000/MAINTAINERS create mode 100644 board/a3m071/MAINTAINERS create mode 100644 board/a4m072/MAINTAINERS create mode 100644 board/abilis/tb100/MAINTAINERS create mode 100644 board/afeb9260/MAINTAINERS create mode 100644 board/ait/cam_enc_4xx/MAINTAINERS create mode 100644 board/alphaproject/ap_sh4a_4a/MAINTAINERS create mode 100644 board/altera/nios2-generic/MAINTAINERS create mode 100644 board/altera/socfpga/MAINTAINERS create mode 100644 board/amcc/acadia/MAINTAINERS create mode 100644 board/amcc/bamboo/MAINTAINERS create mode 100644 board/amcc/bluestone/MAINTAINERS create mode 100644 board/amcc/bubinga/MAINTAINERS create mode 100644 board/amcc/canyonlands/MAINTAINERS create mode 100644 board/amcc/ebony/MAINTAINERS create mode 100644 board/amcc/katmai/MAINTAINERS create mode 100644 board/amcc/kilauea/MAINTAINERS create mode 100644 board/amcc/luan/MAINTAINERS create mode 100644 board/amcc/makalu/MAINTAINERS create mode 100644 board/amcc/ocotea/MAINTAINERS create mode 100644 board/amcc/redwood/MAINTAINERS create mode 100644 board/amcc/sequoia/MAINTAINERS create mode 100644 board/amcc/taihu/MAINTAINERS create mode 100644 board/amcc/taishan/MAINTAINERS create mode 100644 board/amcc/walnut/MAINTAINERS create mode 100644 board/amcc/yosemite/MAINTAINERS create mode 100644 board/amcc/yucca/MAINTAINERS create mode 100644 board/armadeus/apf27/MAINTAINERS create mode 100644 board/armltd/integrator/MAINTAINERS create mode 100644 board/armltd/versatile/MAINTAINERS create mode 100644 board/armltd/vexpress/MAINTAINERS create mode 100644 board/armltd/vexpress64/MAINTAINERS create mode 100644 board/astro/mcf5373l/MAINTAINERS create mode 100644 board/atc/MAINTAINERS create mode 100644 board/atmark-techno/armadillo-800eva/MAINTAINERS create mode 100644 board/atmel/at91rm9200ek/MAINTAINERS create mode 100644 board/atmel/at91sam9260ek/MAINTAINERS create mode 100644 board/atmel/at91sam9261ek/MAINTAINERS create mode 100644 board/atmel/at91sam9263ek/MAINTAINERS create mode 100644 board/atmel/at91sam9m10g45ek/MAINTAINERS create mode 100644 board/atmel/at91sam9n12ek/MAINTAINERS create mode 100644 board/atmel/at91sam9rlek/MAINTAINERS create mode 100644 board/atmel/at91sam9x5ek/MAINTAINERS create mode 100644 board/atmel/atngw100/MAINTAINERS create mode 100644 board/atmel/atngw100mkii/MAINTAINERS create mode 100644 board/atmel/atstk1000/MAINTAINERS create mode 100644 board/atmel/sama5d3_xplained/MAINTAINERS create mode 100644 board/atmel/sama5d3xek/MAINTAINERS create mode 100644 board/avionic-design/medcom-wide/MAINTAINERS create mode 100644 board/avionic-design/plutux/MAINTAINERS create mode 100644 board/avionic-design/tec-ng/MAINTAINERS create mode 100644 board/avionic-design/tec/MAINTAINERS create mode 100644 board/avnet/fx12mm/MAINTAINERS create mode 100644 board/avnet/v5fx30teval/MAINTAINERS create mode 100644 board/balloon3/MAINTAINERS create mode 100644 board/barco/titanium/MAINTAINERS create mode 100644 board/bc3450/MAINTAINERS create mode 100644 board/bct-brettl2/MAINTAINERS create mode 100644 board/bf506f-ezkit/MAINTAINERS create mode 100644 board/bf518f-ezbrd/MAINTAINERS create mode 100644 board/bf525-ucr2/MAINTAINERS create mode 100644 board/bf526-ezbrd/MAINTAINERS create mode 100644 board/bf527-ad7160-eval/MAINTAINERS create mode 100644 board/bf527-ezkit/MAINTAINERS create mode 100644 board/bf527-sdp/MAINTAINERS create mode 100644 board/bf533-ezkit/MAINTAINERS create mode 100644 board/bf533-stamp/MAINTAINERS create mode 100644 board/bf537-minotaur/MAINTAINERS create mode 100644 board/bf537-pnav/MAINTAINERS create mode 100644 board/bf537-srv1/MAINTAINERS create mode 100644 board/bf537-stamp/MAINTAINERS create mode 100644 board/bf538f-ezkit/MAINTAINERS create mode 100644 board/bf548-ezkit/MAINTAINERS create mode 100644 board/bf561-acvilon/MAINTAINERS create mode 100644 board/bf561-ezkit/MAINTAINERS create mode 100644 board/bf609-ezkit/MAINTAINERS create mode 100644 board/blackstamp/MAINTAINERS create mode 100644 board/blackvme/MAINTAINERS create mode 100644 board/bluegiga/apx4devkit/MAINTAINERS create mode 100644 board/bluewater/snapper9260/MAINTAINERS create mode 100644 board/boundary/nitrogen6x/MAINTAINERS create mode 100644 board/br4/MAINTAINERS create mode 100644 board/broadcom/bcm28155_ap/MAINTAINERS create mode 100644 board/buffalo/lsxl/MAINTAINERS create mode 100644 board/calao/sbc35_a9g20/MAINTAINERS create mode 100644 board/calao/tny_a9260/MAINTAINERS create mode 100644 board/calao/usb_a9263/MAINTAINERS create mode 100644 board/canmb/MAINTAINERS create mode 100644 board/chromebook-x86/coreboot/MAINTAINERS create mode 100644 board/cirrus/edb93xx/MAINTAINERS create mode 100644 board/cloudengines/pogo_e02/MAINTAINERS create mode 100644 board/cm-bf527/MAINTAINERS create mode 100644 board/cm-bf533/MAINTAINERS create mode 100644 board/cm-bf537e/MAINTAINERS create mode 100644 board/cm-bf537u/MAINTAINERS create mode 100644 board/cm-bf548/MAINTAINERS create mode 100644 board/cm-bf561/MAINTAINERS create mode 100644 board/cm4008/MAINTAINERS create mode 100644 board/cm41xx/MAINTAINERS create mode 100644 board/cm5200/MAINTAINERS create mode 100644 board/cmi/MAINTAINERS create mode 100644 board/cobra5272/MAINTAINERS create mode 100644 board/cogent/MAINTAINERS create mode 100644 board/comelit/dig297/MAINTAINERS create mode 100644 board/compal/paz00/MAINTAINERS create mode 100644 board/compulab/cm_t335/MAINTAINERS create mode 100644 board/compulab/cm_t35/MAINTAINERS create mode 100644 board/compulab/cm_t54/MAINTAINERS create mode 100644 board/compulab/trimslice/MAINTAINERS create mode 100644 board/congatec/cgtqmx6eval/MAINTAINERS create mode 100644 board/corscience/tricorder/MAINTAINERS create mode 100644 board/cpc45/MAINTAINERS create mode 100644 board/cpu86/MAINTAINERS create mode 100644 board/cpu87/MAINTAINERS create mode 100644 board/cray/L1/MAINTAINERS create mode 100644 board/creative/xfi3/MAINTAINERS create mode 100644 board/csb272/MAINTAINERS create mode 100644 board/csb472/MAINTAINERS create mode 100644 board/cu824/MAINTAINERS create mode 100644 board/d-link/dns325/MAINTAINERS create mode 100644 board/dave/PPChameleonEVB/MAINTAINERS create mode 100644 board/davedenx/aria/MAINTAINERS create mode 100644 board/davedenx/qong/MAINTAINERS create mode 100644 board/davinci/da8xxevm/MAINTAINERS create mode 100644 board/davinci/dm355evm/MAINTAINERS create mode 100644 board/davinci/dm355leopard/MAINTAINERS create mode 100644 board/davinci/dm365evm/MAINTAINERS create mode 100644 board/davinci/dm6467evm/MAINTAINERS create mode 100644 board/davinci/dvevm/MAINTAINERS create mode 100644 board/davinci/ea20/MAINTAINERS create mode 100644 board/davinci/schmoogie/MAINTAINERS create mode 100644 board/davinci/sffsdr/MAINTAINERS create mode 100644 board/davinci/sonata/MAINTAINERS create mode 100644 board/dbau1x00/MAINTAINERS create mode 100644 board/denx/m28evk/MAINTAINERS create mode 100644 board/denx/m53evk/MAINTAINERS create mode 100644 board/dnp5370/MAINTAINERS create mode 100644 board/eXalion/MAINTAINERS create mode 100644 board/earthlcd/favr-32-ezkit/MAINTAINERS create mode 100644 board/egnite/ethernut5/MAINTAINERS create mode 100644 board/eltec/elppc/MAINTAINERS create mode 100644 board/eltec/mhpc/MAINTAINERS create mode 100644 board/embest/mx6boards/MAINTAINERS create mode 100644 board/emk/top5200/MAINTAINERS create mode 100644 board/emk/top860/MAINTAINERS create mode 100644 board/emk/top9000/MAINTAINERS create mode 100644 board/enbw/enbw_cmc/MAINTAINERS create mode 100644 board/ep8260/MAINTAINERS create mode 100644 board/ep82xxm/MAINTAINERS create mode 100644 board/esd/apc405/MAINTAINERS create mode 100644 board/esd/ar405/MAINTAINERS create mode 100644 board/esd/ash405/MAINTAINERS create mode 100644 board/esd/cms700/MAINTAINERS create mode 100644 board/esd/cpci2dp/MAINTAINERS create mode 100644 board/esd/cpci405/MAINTAINERS create mode 100644 board/esd/cpci5200/MAINTAINERS create mode 100644 board/esd/cpci750/MAINTAINERS create mode 100644 board/esd/cpciiser4/MAINTAINERS create mode 100644 board/esd/dp405/MAINTAINERS create mode 100644 board/esd/du405/MAINTAINERS create mode 100644 board/esd/du440/MAINTAINERS create mode 100644 board/esd/hh405/MAINTAINERS create mode 100644 board/esd/hub405/MAINTAINERS create mode 100644 board/esd/mecp5123/MAINTAINERS create mode 100644 board/esd/mecp5200/MAINTAINERS create mode 100644 board/esd/meesc/MAINTAINERS create mode 100644 board/esd/ocrtc/MAINTAINERS create mode 100644 board/esd/otc570/MAINTAINERS create mode 100644 board/esd/pci405/MAINTAINERS create mode 100644 board/esd/pf5200/MAINTAINERS create mode 100644 board/esd/plu405/MAINTAINERS create mode 100644 board/esd/pmc405/MAINTAINERS create mode 100644 board/esd/pmc405de/MAINTAINERS create mode 100644 board/esd/pmc440/MAINTAINERS create mode 100644 board/esd/tasreg/MAINTAINERS create mode 100644 board/esd/vme8349/MAINTAINERS create mode 100644 board/esd/voh405/MAINTAINERS create mode 100644 board/esd/vom405/MAINTAINERS create mode 100644 board/esd/wuh405/MAINTAINERS create mode 100644 board/esg/ima3-mx53/MAINTAINERS create mode 100644 board/espt/MAINTAINERS create mode 100644 board/esteem192e/MAINTAINERS create mode 100644 board/eukrea/cpu9260/MAINTAINERS create mode 100644 board/eukrea/cpuat91/MAINTAINERS create mode 100644 board/evb64260/MAINTAINERS create mode 100644 board/exmeritus/hww1u1a/MAINTAINERS create mode 100644 board/faraday/a320evb/MAINTAINERS create mode 100644 board/flagadm/MAINTAINERS create mode 100644 board/freescale/b4860qds/MAINTAINERS create mode 100644 board/freescale/bsc9131rdb/MAINTAINERS create mode 100644 board/freescale/bsc9132qds/MAINTAINERS create mode 100644 board/freescale/c29xpcie/MAINTAINERS create mode 100644 board/freescale/corenet_ds/MAINTAINERS create mode 100644 board/freescale/ls2085a/MAINTAINERS create mode 100644 board/freescale/m5208evbe/MAINTAINERS create mode 100644 board/freescale/m52277evb/MAINTAINERS create mode 100644 board/freescale/m5235evb/MAINTAINERS create mode 100644 board/freescale/m5249evb/MAINTAINERS create mode 100644 board/freescale/m5253demo/MAINTAINERS create mode 100644 board/freescale/m5253evbe/MAINTAINERS create mode 100644 board/freescale/m5272c3/MAINTAINERS create mode 100644 board/freescale/m5275evb/MAINTAINERS create mode 100644 board/freescale/m5282evb/MAINTAINERS create mode 100644 board/freescale/m53017evb/MAINTAINERS create mode 100644 board/freescale/m5329evb/MAINTAINERS create mode 100644 board/freescale/m5373evb/MAINTAINERS create mode 100644 board/freescale/m54418twr/MAINTAINERS create mode 100644 board/freescale/m54451evb/MAINTAINERS create mode 100644 board/freescale/m54455evb/MAINTAINERS create mode 100644 board/freescale/m547xevb/MAINTAINERS create mode 100644 board/freescale/m548xevb/MAINTAINERS create mode 100644 board/freescale/mpc5121ads/MAINTAINERS create mode 100644 board/freescale/mpc7448hpc2/MAINTAINERS create mode 100644 board/freescale/mpc8266ads/MAINTAINERS create mode 100644 board/freescale/mpc8308rdb/MAINTAINERS create mode 100644 board/freescale/mpc8313erdb/MAINTAINERS create mode 100644 board/freescale/mpc8315erdb/MAINTAINERS create mode 100644 board/freescale/mpc8323erdb/MAINTAINERS create mode 100644 board/freescale/mpc832xemds/MAINTAINERS create mode 100644 board/freescale/mpc8349emds/MAINTAINERS create mode 100644 board/freescale/mpc8349itx/MAINTAINERS create mode 100644 board/freescale/mpc8360emds/MAINTAINERS create mode 100644 board/freescale/mpc8360erdk/MAINTAINERS create mode 100644 board/freescale/mpc837xemds/MAINTAINERS create mode 100644 board/freescale/mpc837xerdb/MAINTAINERS create mode 100644 board/freescale/mpc8536ds/MAINTAINERS create mode 100644 board/freescale/mpc8540ads/MAINTAINERS create mode 100644 board/freescale/mpc8541cds/MAINTAINERS create mode 100644 board/freescale/mpc8544ds/MAINTAINERS create mode 100644 board/freescale/mpc8548cds/MAINTAINERS create mode 100644 board/freescale/mpc8555cds/MAINTAINERS create mode 100644 board/freescale/mpc8560ads/MAINTAINERS create mode 100644 board/freescale/mpc8568mds/MAINTAINERS create mode 100644 board/freescale/mpc8569mds/MAINTAINERS create mode 100644 board/freescale/mpc8572ds/MAINTAINERS create mode 100644 board/freescale/mpc8610hpcd/MAINTAINERS create mode 100644 board/freescale/mpc8641hpcn/MAINTAINERS create mode 100644 board/freescale/mx23evk/MAINTAINERS create mode 100644 board/freescale/mx25pdk/MAINTAINERS create mode 100644 board/freescale/mx28evk/MAINTAINERS create mode 100644 board/freescale/mx31ads/MAINTAINERS create mode 100644 board/freescale/mx31pdk/MAINTAINERS create mode 100644 board/freescale/mx35pdk/MAINTAINERS create mode 100644 board/freescale/mx51evk/MAINTAINERS create mode 100644 board/freescale/mx53ard/MAINTAINERS create mode 100644 board/freescale/mx53evk/MAINTAINERS create mode 100644 board/freescale/mx53loco/MAINTAINERS create mode 100644 board/freescale/mx53smd/MAINTAINERS create mode 100644 board/freescale/mx6qarm2/MAINTAINERS create mode 100644 board/freescale/mx6qsabreauto/MAINTAINERS create mode 100644 board/freescale/mx6sabresd/MAINTAINERS create mode 100644 board/freescale/mx6slevk/MAINTAINERS create mode 100644 board/freescale/p1010rdb/MAINTAINERS create mode 100644 board/freescale/p1022ds/MAINTAINERS create mode 100644 board/freescale/p1023rdb/MAINTAINERS create mode 100644 board/freescale/p1_p2_rdb/MAINTAINERS create mode 100644 board/freescale/p1_p2_rdb_pc/MAINTAINERS create mode 100644 board/freescale/p1_twr/MAINTAINERS create mode 100644 board/freescale/p2020come/MAINTAINERS create mode 100644 board/freescale/p2020ds/MAINTAINERS create mode 100644 board/freescale/p2041rdb/MAINTAINERS create mode 100644 board/freescale/qemu-ppce500/MAINTAINERS create mode 100644 board/freescale/t1040qds/MAINTAINERS create mode 100644 board/freescale/t104xrdb/MAINTAINERS create mode 100644 board/freescale/t208xqds/MAINTAINERS create mode 100644 board/freescale/t208xrdb/MAINTAINERS create mode 100644 board/freescale/t4qds/MAINTAINERS create mode 100644 board/freescale/t4rdb/MAINTAINERS create mode 100644 board/freescale/vf610twr/MAINTAINERS create mode 100644 board/funkwerk/vovpn-gw/MAINTAINERS create mode 100644 board/g2000/MAINTAINERS create mode 100644 board/gaisler/gr_cpci_ax2000/MAINTAINERS create mode 100644 board/gaisler/gr_ep2s60/MAINTAINERS create mode 100644 board/gaisler/gr_xc3s_1500/MAINTAINERS create mode 100644 board/gaisler/grsim/MAINTAINERS create mode 100644 board/gaisler/grsim_leon2/MAINTAINERS create mode 100644 board/galaxy5200/MAINTAINERS create mode 100644 board/gateworks/gw_ventana/MAINTAINERS create mode 100644 board/gdsys/405ep/MAINTAINERS create mode 100644 board/gdsys/405ex/MAINTAINERS create mode 100644 board/gdsys/dlvision/MAINTAINERS create mode 100644 board/gdsys/gdppc440etx/MAINTAINERS create mode 100644 board/gdsys/intip/MAINTAINERS create mode 100644 board/gdsys/p1022/MAINTAINERS create mode 100644 board/gen860t/MAINTAINERS create mode 100644 board/genesi/mx51_efikamx/MAINTAINERS create mode 100644 board/gumstix/duovero/MAINTAINERS create mode 100644 board/gumstix/pepper/MAINTAINERS create mode 100644 board/gw8260/MAINTAINERS create mode 100644 board/h2200/MAINTAINERS create mode 100644 board/hale/tt01/MAINTAINERS create mode 100644 board/hermes/MAINTAINERS create mode 100644 board/highbank/MAINTAINERS create mode 100644 board/htkw/mcx/MAINTAINERS create mode 100644 board/hymod/MAINTAINERS create mode 100644 board/ibf-dsp561/MAINTAINERS create mode 100644 board/icecube/MAINTAINERS create mode 100644 board/icpdas/lp8x4x/MAINTAINERS create mode 100644 board/icu862/MAINTAINERS create mode 100644 board/ids/ids8247/MAINTAINERS create mode 100644 board/ids/ids8313/MAINTAINERS create mode 100644 board/ifm/ac14xx/MAINTAINERS create mode 100644 board/ifm/o2dnt2/MAINTAINERS create mode 100644 board/imgtec/malta/MAINTAINERS create mode 100644 board/imx31_phycore/MAINTAINERS create mode 100644 board/in-circuit/grasshopper/MAINTAINERS create mode 100644 board/inka4x0/MAINTAINERS create mode 100644 board/intercontrol/digsy_mtc/MAINTAINERS create mode 100644 board/iomega/iconnect/MAINTAINERS create mode 100644 board/ip04/MAINTAINERS create mode 100644 board/ip860/MAINTAINERS create mode 100644 board/ipek01/MAINTAINERS create mode 100644 board/iphase4539/MAINTAINERS create mode 100644 board/isee/igep0033/MAINTAINERS create mode 100644 board/isee/igep00x0/MAINTAINERS create mode 100644 board/ivm/MAINTAINERS create mode 100644 board/jornada/MAINTAINERS create mode 100644 board/jse/MAINTAINERS create mode 100644 board/jupiter/MAINTAINERS create mode 100644 board/karo/tk71/MAINTAINERS create mode 100644 board/karo/tx25/MAINTAINERS create mode 100644 board/keymile/km82xx/MAINTAINERS create mode 100644 board/keymile/km83xx/MAINTAINERS create mode 100644 board/keymile/km_arm/MAINTAINERS create mode 100644 board/keymile/kmp204x/MAINTAINERS create mode 100644 board/kmc/kzm9g/MAINTAINERS create mode 100644 board/korat/MAINTAINERS create mode 100644 board/kup/kup4k/MAINTAINERS create mode 100644 board/kup/kup4x/MAINTAINERS create mode 100644 board/logicpd/am3517evm/MAINTAINERS create mode 100644 board/logicpd/imx27lite/MAINTAINERS create mode 100644 board/logicpd/imx31_litekit/MAINTAINERS create mode 100644 board/logicpd/omap3som/MAINTAINERS create mode 100644 board/logicpd/zoom1/MAINTAINERS create mode 100644 board/lwmon/MAINTAINERS create mode 100644 board/lwmon5/MAINTAINERS create mode 100644 board/manroland/hmi1001/MAINTAINERS create mode 100644 board/manroland/mucmc52/MAINTAINERS create mode 100644 board/manroland/uc100/MAINTAINERS create mode 100644 board/manroland/uc101/MAINTAINERS create mode 100644 board/matrix_vision/mergerbox/MAINTAINERS create mode 100644 board/matrix_vision/mvbc_p/MAINTAINERS create mode 100644 board/matrix_vision/mvblm7/MAINTAINERS create mode 100644 board/matrix_vision/mvblx/MAINTAINERS create mode 100644 board/matrix_vision/mvsmr/MAINTAINERS create mode 100644 board/mcc200/MAINTAINERS create mode 100644 board/micronas/vct/MAINTAINERS create mode 100644 board/mimc/mimc200/MAINTAINERS create mode 100644 board/miromico/hammerhead/MAINTAINERS create mode 100644 board/mosaixtech/icon/MAINTAINERS create mode 100644 board/motionpro/MAINTAINERS create mode 100644 board/mpc8308_p1m/MAINTAINERS create mode 100644 board/mpl/mip405/MAINTAINERS create mode 100644 board/mpl/pati/MAINTAINERS create mode 100644 board/mpl/pip405/MAINTAINERS create mode 100644 board/mpl/vcma9/MAINTAINERS create mode 100644 board/mpr2/MAINTAINERS create mode 100644 board/ms7720se/MAINTAINERS create mode 100644 board/ms7722se/MAINTAINERS create mode 100644 board/ms7750se/MAINTAINERS create mode 100644 board/muas3001/MAINTAINERS create mode 100644 board/munices/MAINTAINERS create mode 100644 board/musenki/MAINTAINERS create mode 100644 board/mvblue/MAINTAINERS create mode 100644 board/netvia/MAINTAINERS create mode 100644 board/nokia/rx51/MAINTAINERS create mode 100644 board/nvidia/beaver/MAINTAINERS create mode 100644 board/nvidia/cardhu/MAINTAINERS create mode 100644 board/nvidia/dalmore/MAINTAINERS create mode 100644 board/nvidia/harmony/MAINTAINERS create mode 100644 board/nvidia/jetson-tk1/MAINTAINERS create mode 100644 board/nvidia/seaboard/MAINTAINERS create mode 100644 board/nvidia/venice2/MAINTAINERS create mode 100644 board/nvidia/ventana/MAINTAINERS create mode 100644 board/nvidia/whistler/MAINTAINERS create mode 100644 board/olimex/mx23_olinuxino/MAINTAINERS create mode 100644 board/omicron/calimain/MAINTAINERS create mode 100644 board/openrisc/openrisc-generic/MAINTAINERS create mode 100644 board/overo/MAINTAINERS create mode 100644 board/palmld/MAINTAINERS create mode 100644 board/palmtc/MAINTAINERS create mode 100644 board/palmtreo680/MAINTAINERS create mode 100644 board/pandora/MAINTAINERS create mode 100644 board/pb1x00/MAINTAINERS create mode 100644 board/pcs440ep/MAINTAINERS create mode 100644 board/pdm360ng/MAINTAINERS create mode 100644 board/phytec/pcm030/MAINTAINERS create mode 100644 board/phytec/pcm051/MAINTAINERS create mode 100644 board/pm520/MAINTAINERS create mode 100644 board/pm826/MAINTAINERS create mode 100644 board/pm828/MAINTAINERS create mode 100644 board/ppcag/bg0900/MAINTAINERS create mode 100644 board/ppmc7xx/MAINTAINERS create mode 100644 board/ppmc8260/MAINTAINERS create mode 100644 board/pr1/MAINTAINERS create mode 100644 board/prodrive/alpr/MAINTAINERS create mode 100644 board/prodrive/p3mx/MAINTAINERS create mode 100644 board/prodrive/p3p440/MAINTAINERS create mode 100644 board/psyent/pci5441/MAINTAINERS create mode 100644 board/psyent/pk1c20/MAINTAINERS create mode 100644 board/pxa255_idp/MAINTAINERS create mode 100644 board/qemu-mips/MAINTAINERS create mode 100644 board/r360mpi/MAINTAINERS create mode 100644 board/raidsonic/ib62x0/MAINTAINERS create mode 100644 board/raspberrypi/rpi_b/MAINTAINERS create mode 100644 board/renesas/MigoR/MAINTAINERS create mode 100644 board/renesas/alt/MAINTAINERS create mode 100644 board/renesas/ap325rxa/MAINTAINERS create mode 100644 board/renesas/ecovec/MAINTAINERS create mode 100644 board/renesas/koelsch/MAINTAINERS create mode 100644 board/renesas/lager/MAINTAINERS create mode 100644 board/renesas/r0p7734/MAINTAINERS create mode 100644 board/renesas/r2dplus/MAINTAINERS create mode 100644 board/renesas/r7780mp/MAINTAINERS create mode 100644 board/renesas/rsk7203/MAINTAINERS create mode 100644 board/renesas/rsk7264/MAINTAINERS create mode 100644 board/renesas/rsk7269/MAINTAINERS create mode 100644 board/renesas/sh7752evb/MAINTAINERS create mode 100644 board/renesas/sh7753evb/MAINTAINERS create mode 100644 board/renesas/sh7757lcr/MAINTAINERS create mode 100644 board/renesas/sh7763rdp/MAINTAINERS create mode 100644 board/renesas/sh7785lcr/MAINTAINERS create mode 100644 board/ronetix/pm9261/MAINTAINERS create mode 100644 board/ronetix/pm9263/MAINTAINERS create mode 100644 board/ronetix/pm9g45/MAINTAINERS create mode 100644 board/sacsng/MAINTAINERS create mode 100644 board/samsung/arndale/MAINTAINERS create mode 100644 board/samsung/goni/MAINTAINERS create mode 100644 board/samsung/origen/MAINTAINERS create mode 100644 board/samsung/smdk2410/MAINTAINERS create mode 100644 board/samsung/smdk5250/MAINTAINERS create mode 100644 board/samsung/smdk5420/MAINTAINERS create mode 100644 board/samsung/smdkc100/MAINTAINERS create mode 100644 board/samsung/smdkv310/MAINTAINERS create mode 100644 board/samsung/trats/MAINTAINERS create mode 100644 board/samsung/trats2/MAINTAINERS create mode 100644 board/samsung/universal_c210/MAINTAINERS create mode 100644 board/sandbox/MAINTAINERS create mode 100644 board/sandburst/karef/MAINTAINERS create mode 100644 board/sandburst/metrobox/MAINTAINERS create mode 100644 board/sandisk/sansa_fuze_plus/MAINTAINERS create mode 100644 board/sandpoint/MAINTAINERS create mode 100644 board/sbc405/MAINTAINERS create mode 100644 board/sbc8349/MAINTAINERS create mode 100644 board/sbc8548/MAINTAINERS create mode 100644 board/sbc8641d/MAINTAINERS create mode 100644 board/sc3/MAINTAINERS create mode 100644 board/scb9328/MAINTAINERS create mode 100644 board/schulercontrol/sc_sps_1/MAINTAINERS create mode 100644 board/shmin/MAINTAINERS create mode 100644 board/siemens/corvus/MAINTAINERS create mode 100644 board/siemens/draco/MAINTAINERS create mode 100644 board/siemens/pxm2/MAINTAINERS create mode 100644 board/siemens/rut/MAINTAINERS create mode 100644 board/siemens/taurus/MAINTAINERS create mode 100644 board/silica/pengwyn/MAINTAINERS create mode 100644 board/sixnet/MAINTAINERS create mode 100644 board/socrates/MAINTAINERS create mode 100644 board/solidrun/hummingboard/MAINTAINERS create mode 100644 board/spd8xx/MAINTAINERS create mode 100644 board/spear/spear300/MAINTAINERS create mode 100644 board/spear/spear310/MAINTAINERS create mode 100644 board/spear/spear320/MAINTAINERS create mode 100644 board/spear/spear600/MAINTAINERS create mode 100644 board/spear/x600/MAINTAINERS create mode 100644 board/st-ericsson/snowball/MAINTAINERS create mode 100644 board/st-ericsson/u8500/MAINTAINERS create mode 100644 board/st/nhk8815/MAINTAINERS create mode 100644 board/stx/stxgp3/MAINTAINERS create mode 100644 board/stx/stxssa/MAINTAINERS create mode 100644 board/stx/stxxtc/MAINTAINERS create mode 100644 board/sunxi/MAINTAINERS create mode 100644 board/svm_sc8xx/MAINTAINERS create mode 100644 board/synopsys/MAINTAINERS create mode 100644 board/synopsys/axs101/MAINTAINERS create mode 100644 board/syteco/jadecpu/MAINTAINERS create mode 100644 board/syteco/zmx25/MAINTAINERS create mode 100644 board/t3corp/MAINTAINERS create mode 100644 board/taskit/stamp9g20/MAINTAINERS create mode 100644 board/tcm-bf518/MAINTAINERS create mode 100644 board/tcm-bf537/MAINTAINERS create mode 100644 board/technexion/tao3530/MAINTAINERS create mode 100644 board/technexion/twister/MAINTAINERS create mode 100644 board/teejet/mt_ventoux/MAINTAINERS create mode 100644 board/ti/am335x/MAINTAINERS create mode 100644 board/ti/am3517crane/MAINTAINERS create mode 100644 board/ti/am43xx/MAINTAINERS create mode 100644 board/ti/beagle/MAINTAINERS create mode 100644 board/ti/dra7xx/MAINTAINERS create mode 100644 board/ti/evm/MAINTAINERS create mode 100644 board/ti/ks2_evm/MAINTAINERS create mode 100644 board/ti/omap5912osk/MAINTAINERS create mode 100644 board/ti/omap5_uevm/MAINTAINERS create mode 100644 board/ti/panda/MAINTAINERS create mode 100644 board/ti/sdp3430/MAINTAINERS create mode 100644 board/ti/sdp4430/MAINTAINERS create mode 100644 board/ti/ti814x/MAINTAINERS create mode 100644 board/ti/ti816x/MAINTAINERS create mode 100644 board/ti/tnetv107xevm/MAINTAINERS create mode 100644 board/timll/devkit3250/MAINTAINERS create mode 100644 board/timll/devkit8000/MAINTAINERS create mode 100644 board/toradex/colibri_pxa270/MAINTAINERS create mode 100644 board/toradex/colibri_t20_iris/MAINTAINERS create mode 100644 board/total5200/MAINTAINERS create mode 100644 board/tqc/tqm5200/MAINTAINERS create mode 100644 board/tqc/tqm8260/MAINTAINERS create mode 100644 board/tqc/tqm8272/MAINTAINERS create mode 100644 board/tqc/tqm834x/MAINTAINERS create mode 100644 board/tqc/tqm8xx/MAINTAINERS create mode 100644 board/trizepsiv/MAINTAINERS create mode 100644 board/ttcontrol/vision2/MAINTAINERS create mode 100644 board/udoo/MAINTAINERS create mode 100644 board/utx8245/MAINTAINERS create mode 100644 board/v38b/MAINTAINERS create mode 100644 board/ve8313/MAINTAINERS create mode 100644 board/vpac270/MAINTAINERS create mode 100644 board/w7o/MAINTAINERS create mode 100644 board/wandboard/MAINTAINERS create mode 100644 board/woodburn/MAINTAINERS create mode 100644 board/xaeniax/MAINTAINERS create mode 100644 board/xes/xpedite1000/MAINTAINERS create mode 100644 board/xes/xpedite517x/MAINTAINERS create mode 100644 board/xes/xpedite520x/MAINTAINERS create mode 100644 board/xes/xpedite537x/MAINTAINERS create mode 100644 board/xes/xpedite550x/MAINTAINERS create mode 100644 board/xilinx/microblaze-generic/MAINTAINERS create mode 100644 board/xilinx/ml507/MAINTAINERS create mode 100644 board/xilinx/ppc405-generic/MAINTAINERS create mode 100644 board/xilinx/ppc440-generic/MAINTAINERS create mode 100644 board/xilinx/zynq/MAINTAINERS create mode 100644 board/zeus/MAINTAINERS create mode 100644 board/zipitz2/MAINTAINERS
board/8dtech/eco5pk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ECO5PK BOARD +M: Raphael Assenat <[email protected]> +S: Maintained +F: board/8dtech/eco5pk/ +F: include/configs/eco5pk.h +F: configs/eco5pk_defconfig
board/AndesTech/adp-ag101/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ADP-AG101 BOARD +M: Andes <[email protected]> +S: Maintained +F: board/AndesTech/adp-ag101/ +F: include/configs/adp-ag101.h +F: configs/adp-ag101_defconfig
board/AndesTech/adp-ag101p/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ADP-AG101P BOARD +M: Andes <[email protected]> +S: Maintained +F: board/AndesTech/adp-ag101p/ +F: include/configs/adp-ag101p.h +F: configs/adp-ag101p_defconfig
board/AndesTech/adp-ag102/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ADP-AG102 BOARD +M: Andes <[email protected]> +S: Maintained +F: board/AndesTech/adp-ag102/ +F: include/configs/adp-ag102.h +F: configs/adp-ag102_defconfig
board/Barix/ipam390/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IPAM390 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/Barix/ipam390/ +F: include/configs/ipam390.h +F: configs/ipam390_defconfig
board/BuR/kwb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +KWB BOARD +M: Hannes Petermaier <[email protected]> +S: Maintained +F: board/BuR/kwb/ +F: include/configs/kwb.h +F: configs/kwb_defconfig
board/BuR/tseries/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +TSERIES BOARD +M: Hannes Petermaier <[email protected]> +S: Maintained +F: board/BuR/tseries/ +F: include/configs/tseries.h +F: configs/tseries_mmc_defconfig +F: configs/tseries_nand_defconfig +F: configs/tseries_spi_defconfig
board/BuS/eb_cpu5282/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +EB_CPU5282 BOARD +M: Jens Scharsig <[email protected]> +S: Maintained +F: board/BuS/eb_cpu5282/ +F: include/configs/eb_cpu5282.h +F: configs/eb_cpu5282_defconfig +F: configs/eb_cpu5282_internal_defconfig
board/BuS/eb_cpux9k2/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +EB_CPUX9K2 BOARD +M: Jens Scharsig <[email protected]> +S: Maintained +F: board/BuS/eb_cpux9k2/ +F: include/configs/eb_cpux9k2.h +F: configs/eb_cpux9k2_defconfig +F: configs/eb_cpux9k2_ram_defconfig
board/BuS/vl_ma2sc/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +VL_MA2SC BOARD +M: Jens Scharsig <[email protected]> +S: Maintained +F: board/BuS/vl_ma2sc/ +F: include/configs/vl_ma2sc.h +F: configs/vl_ma2sc_defconfig +F: configs/vl_ma2sc_ram_defconfig
board/CarMediaLab/flea3/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +FLEA3 BOARD +M: Stefano Babic <[email protected]> +S: Maintained +F: board/CarMediaLab/flea3/ +F: include/configs/flea3.h +F: configs/flea3_defconfig
board/LEOX/elpt860/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ELPT860 BOARD +M: The LEOX team <[email protected]> +S: Maintained +F: board/LEOX/elpt860/ +F: include/configs/ELPT860.h +F: configs/ELPT860_defconfig
board/LaCie/edminiv2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EDMINIV2 BOARD +M: Albert ARIBAUD <[email protected]> +S: Maintained +F: board/LaCie/edminiv2/ +F: include/configs/edminiv2.h +F: configs/edminiv2_defconfig
board/LaCie/net2big_v2/MAINTAINERS new file +11 -0
@@ -0,0 +1,11 @@ +NET2BIG_V2 BOARD +M: - +S: Maintained +F: board/LaCie/net2big_v2/ +F: include/configs/lacie_kw.h +F: configs/d2net_v2_defconfig + +NET2BIG_V2 BOARD +M: Simon Guinot <[email protected]> +S: Maintained +F: configs/net2big_v2_defconfig
board/LaCie/netspace_v2/MAINTAINERS new file +14 -0
@@ -0,0 +1,14 @@ +NETSPACE_V2 BOARD +M: Simon Guinot <[email protected]> +S: Maintained +F: board/LaCie/netspace_v2/ +F: include/configs/lacie_kw.h +F: configs/inetspace_v2_defconfig +F: configs/netspace_max_v2_defconfig +F: configs/netspace_v2_defconfig + +NETSPACE_LITE_V2 BOARD +M: - +S: Maintained +F: configs/netspace_lite_v2_defconfig +F: configs/netspace_mini_v2_defconfig
board/LaCie/wireless_space/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +WIRELESS_SPACE BOARD +M: - +S: Maintained +F: board/LaCie/wireless_space/ +F: include/configs/wireless_space.h +F: configs/wireless_space_defconfig
board/Marvell/aspenite/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ASPENITE BOARD +M: Prafulla Wadaskar <[email protected]> +S: Maintained +F: board/Marvell/aspenite/ +F: include/configs/aspenite.h +F: configs/aspenite_defconfig
board/Marvell/db64360/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DB64360 BOARD +M: - +S: Maintained +F: board/Marvell/db64360/ +F: include/configs/DB64360.h +F: configs/DB64360_defconfig
board/Marvell/db64460/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DB64460 BOARD +M: - +S: Maintained +F: board/Marvell/db64460/ +F: include/configs/DB64460.h +F: configs/DB64460_defconfig
board/Marvell/dkb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DKB BOARD +M: Lei Wen <[email protected]> +S: Maintained +F: board/Marvell/dkb/ +F: include/configs/dkb.h +F: configs/dkb_defconfig
board/Marvell/dreamplug/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DREAMPLUG BOARD +M: Jason Cooper <[email protected]> +S: Maintained +F: board/Marvell/dreamplug/ +F: include/configs/dreamplug.h +F: configs/dreamplug_defconfig
board/Marvell/gplugd/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GPLUGD BOARD +M: Ajay Bhargav <[email protected]> +S: Maintained +F: board/Marvell/gplugd/ +F: include/configs/gplugd.h +F: configs/gplugd_defconfig
board/Marvell/guruplug/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GURUPLUG BOARD +M: Siddarth Gore <[email protected]> +S: Maintained +F: board/Marvell/guruplug/ +F: include/configs/guruplug.h +F: configs/guruplug_defconfig
board/Marvell/mv88f6281gtw_ge/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MV88F6281GTW_GE BOARD +M: Prafulla Wadaskar <[email protected]> +S: Maintained +F: board/Marvell/mv88f6281gtw_ge/ +F: include/configs/mv88f6281gtw_ge.h +F: configs/mv88f6281gtw_ge_defconfig
board/Marvell/openrd/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +OPENRD BOARD +M: Prafulla Wadaskar <[email protected]> +S: Maintained +F: board/Marvell/openrd/ +F: include/configs/openrd.h +F: configs/openrd_base_defconfig + +OPENRD_CLIENT BOARD +M: - +S: Maintained +F: configs/openrd_client_defconfig +F: configs/openrd_ultimate_defconfig
board/Marvell/rd6281a/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +RD6281A BOARD +M: Prafulla Wadaskar <[email protected]> +S: Maintained +F: board/Marvell/rd6281a/ +F: include/configs/rd6281a.h +F: configs/rd6281a_defconfig
board/Marvell/sheevaplug/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +SHEEVAPLUG BOARD +M: Prafulla Wadaskar <[email protected]> +S: Maintained +F: board/Marvell/sheevaplug/ +F: include/configs/sheevaplug.h +F: configs/sheevaplug_defconfig
board/RRvision/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +RRVISION BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/RRvision/ +F: include/configs/RRvision.h +F: configs/RRvision_defconfig +F: configs/RRvision_LCD_defconfig
board/Seagate/dockstar/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DOCKSTAR BOARD +M: Eric Cooper <[email protected]> +S: Maintained +F: board/Seagate/dockstar/ +F: include/configs/dockstar.h +F: configs/dockstar_defconfig
board/Seagate/goflexhome/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GOFLEXHOME BOARD +M: Suriyan Ramasami <[email protected]> +S: Maintained +F: board/Seagate/goflexhome/ +F: include/configs/goflexhome.h +F: configs/goflexhome_defconfig
board/a3000/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +A3000 BOARD +M: - +S: Maintained +F: board/a3000/ +F: include/configs/A3000.h +F: configs/A3000_defconfig
board/a3m071/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +A3M071 BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/a3m071/ +F: include/configs/a3m071.h +F: configs/a3m071_defconfig +F: configs/a4m2k_defconfig
board/a4m072/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +A4M072 BOARD +M: Sergei Poselenov <[email protected]> +S: Maintained +F: board/a4m072/ +F: include/configs/a4m072.h +F: configs/a4m072_defconfig
board/abilis/tb100/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TB100 BOARD +M: Alexey Brodkin <[email protected]> +S: Maintained +F: board/abilis/tb100/ +F: include/configs/tb100.h +F: configs/tb100_defconfig
board/afeb9260/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +AFEB9260 BOARD +M: Sergey Lapin <[email protected]> +S: Maintained +F: board/afeb9260/ +F: include/configs/afeb9260.h +F: configs/afeb9260_defconfig
board/ait/cam_enc_4xx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CAM_ENC_4XX BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/ait/cam_enc_4xx/ +F: include/configs/cam_enc_4xx.h +F: configs/cam_enc_4xx_defconfig
board/alphaproject/ap_sh4a_4a/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +AP_SH4A_4A BOARD +M: Nobuhiro Iwamatsu <[email protected]> +M: Nobuhiro Iwamatsu <[email protected]> +S: Maintained +F: board/alphaproject/ap_sh4a_4a/ +F: include/configs/ap_sh4a_4a.h +F: configs/ap_sh4a_4a_defconfig
board/altera/nios2-generic/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +NIOS2-GENERIC BOARD +M: Scott McNutt <[email protected]> +S: Maintained +F: board/altera/nios2-generic/ +F: include/configs/nios2-generic.h +F: configs/nios2-generic_defconfig
board/altera/socfpga/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SOCFPGA BOARD +M: Dinh Nguyen <[email protected]> +M: Chin-Liang See <[email protected]> +S: Maintained +F: board/altera/socfpga/ +F: include/configs/socfpga_cyclone5.h +F: configs/socfpga_cyclone5_defconfig
board/amcc/acadia/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ACADIA BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/acadia/ +F: include/configs/acadia.h +F: configs/acadia_defconfig
board/amcc/bamboo/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BAMBOO BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/bamboo/ +F: include/configs/bamboo.h +F: configs/bamboo_defconfig
board/amcc/bluestone/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BLUESTONE BOARD +M: Tirumala Marri <[email protected]> +S: Orphan (since 2014-03) +F: board/amcc/bluestone/ +F: include/configs/bluestone.h +F: configs/bluestone_defconfig
board/amcc/bubinga/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BUBINGA BOARD +M: - +S: Maintained +F: board/amcc/bubinga/ +F: include/configs/bubinga.h +F: configs/bubinga_defconfig
board/amcc/canyonlands/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +CANYONLANDS BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/canyonlands/ +F: include/configs/canyonlands.h +F: configs/arches_defconfig +F: configs/canyonlands_defconfig +F: configs/glacier_defconfig
board/amcc/ebony/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EBONY BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/ebony/ +F: include/configs/ebony.h +F: configs/ebony_defconfig
board/amcc/katmai/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +KATMAI BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/katmai/ +F: include/configs/katmai.h +F: configs/katmai_defconfig
board/amcc/kilauea/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +KILAUEA BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/kilauea/ +F: include/configs/kilauea.h +F: configs/haleakala_defconfig +F: configs/kilauea_defconfig
board/amcc/luan/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +LUAN BOARD +M: John Otken <[email protected]> +S: Maintained +F: board/amcc/luan/ +F: include/configs/luan.h +F: configs/luan_defconfig
board/amcc/makalu/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MAKALU BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/makalu/ +F: include/configs/makalu.h +F: configs/makalu_defconfig
board/amcc/ocotea/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +OCOTEA BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/ocotea/ +F: include/configs/ocotea.h +F: configs/ocotea_defconfig
board/amcc/redwood/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +REDWOOD BOARD +M: Feng Kan <[email protected]> +S: Maintained +F: board/amcc/redwood/ +F: include/configs/redwood.h +F: configs/redwood_defconfig
board/amcc/sequoia/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +SEQUOIA BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/sequoia/ +F: include/configs/sequoia.h +F: configs/rainier_defconfig +F: configs/rainier_ramboot_defconfig +F: configs/sequoia_defconfig +F: configs/sequoia_ramboot_defconfig
board/amcc/taihu/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TAIHU BOARD +M: John Otken <[email protected]> +S: Maintained +F: board/amcc/taihu/ +F: include/configs/taihu.h +F: configs/taihu_defconfig
board/amcc/taishan/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TAISHAN BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/taishan/ +F: include/configs/taishan.h +F: configs/taishan_defconfig
board/amcc/walnut/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +WALNUT BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/walnut/ +F: include/configs/walnut.h +F: configs/sycamore_defconfig +F: configs/walnut_defconfig
board/amcc/yosemite/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +YOSEMITE BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/amcc/yosemite/ +F: include/configs/yosemite.h +F: configs/yellowstone_defconfig +F: configs/yosemite_defconfig
board/amcc/yucca/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +YUCCA BOARD +M: - +S: Maintained +F: board/amcc/yucca/ +F: include/configs/yucca.h +F: configs/yucca_defconfig
board/armadeus/apf27/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +APF27 BOARD +M: Philippe Reynes <[email protected]> +M: Eric Jarrige <[email protected]> +S: Maintained +F: board/armadeus/apf27/ +F: include/configs/apf27.h +F: configs/apf27_defconfig
board/armltd/integrator/MAINTAINERS new file +14 -0
@@ -0,0 +1,14 @@ +INTEGRATOR BOARD +M: Linus Walleij <[email protected]> +S: Maintained +F: board/armltd/integrator/ +F: include/configs/integratorcp.h +F: configs/integratorcp_cm1136_defconfig +F: include/configs/integratorap.h +F: configs/integratorap_cm720t_defconfig +F: configs/integratorap_cm920t_defconfig +F: configs/integratorcp_cm920t_defconfig +F: configs/integratorap_cm926ejs_defconfig +F: configs/integratorcp_cm926ejs_defconfig +F: configs/integratorap_cm946es_defconfig +F: configs/integratorcp_cm946es_defconfig
board/armltd/versatile/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +VERSATILE BOARD +M: - +S: Maintained +F: board/armltd/versatile/ +F: include/configs/versatile.h +F: configs/versatileab_defconfig +F: configs/versatilepb_defconfig +F: configs/versatileqemu_defconfig
board/armltd/vexpress/MAINTAINERS new file +14 -0
@@ -0,0 +1,14 @@ +VEXPRESS BOARD +M: - +S: Maintained +F: board/armltd/vexpress/ +F: include/configs/vexpress_ca15_tc2.h +F: configs/vexpress_ca15_tc2_defconfig + +VEXPRESS_CA5X2 BOARD +M: Matt Waddel <[email protected]> +S: Maintained +F: include/configs/vexpress_ca5x2.h +F: configs/vexpress_ca5x2_defconfig +F: include/configs/vexpress_ca9x4.h +F: configs/vexpress_ca9x4_defconfig
board/armltd/vexpress64/MAINTAINERS new file +11 -0
@@ -0,0 +1,11 @@ +VEXPRESS64 BOARD +M: David Feng <[email protected]> +S: Maintained +F: board/armltd/vexpress64/ +F: include/configs/vexpress_aemv8a.h +F: configs/vexpress_aemv8a_defconfig + +VEXPRESS_AEMV8A_SEMI BOARD +M: Steve Rae <[email protected]> +S: Maintained +F: configs/vexpress_aemv8a_semi_defconfig
board/astro/mcf5373l/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MCF5373L BOARD +M: Wolfgang Wegner <[email protected]> +S: Maintained +F: board/astro/mcf5373l/ +F: include/configs/astro_mcf5373l.h +F: configs/astro_mcf5373l_defconfig
board/atc/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ATC BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/atc/ +F: include/configs/atc.h +F: configs/atc_defconfig
board/atmark-techno/armadillo-800eva/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ARMADILLO-800EVA BOARD +M: Nobuhiro Iwamatsu <[email protected]> +S: Maintained +F: board/atmark-techno/armadillo-800eva/ +F: include/configs/armadillo-800eva.h +F: configs/armadillo-800eva_defconfig
board/atmel/at91rm9200ek/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +AT91RM9200EK BOARD +M: Andreas Bie?mann <[email protected]> +S: Maintained +F: board/atmel/at91rm9200ek/ +F: include/configs/at91rm9200ek.h +F: configs/at91rm9200ek_defconfig +F: configs/at91rm9200ek_ram_defconfig
board/atmel/at91sam9260ek/MAINTAINERS new file +16 -0
@@ -0,0 +1,16 @@ +AT91SAM9260EK BOARD +M: Stelian Pop <[email protected]> +S: Maintained +F: board/atmel/at91sam9260ek/ +F: include/configs/at91sam9260ek.h +F: configs/at91sam9260ek_dataflash_cs0_defconfig +F: configs/at91sam9260ek_dataflash_cs1_defconfig +F: configs/at91sam9260ek_nandflash_defconfig +F: configs/at91sam9g20ek_2mmc_nandflash_defconfig +F: configs/at91sam9g20ek_dataflash_cs0_defconfig +F: configs/at91sam9g20ek_dataflash_cs1_defconfig +F: configs/at91sam9g20ek_mmc_defconfig +F: configs/at91sam9g20ek_nandflash_defconfig +F: configs/at91sam9xeek_dataflash_cs0_defconfig +F: configs/at91sam9xeek_dataflash_cs1_defconfig +F: configs/at91sam9xeek_nandflash_defconfig
board/atmel/at91sam9261ek/MAINTAINERS new file +11 -0
@@ -0,0 +1,11 @@ +AT91SAM9261EK BOARD +M: Stelian Pop <[email protected]> +S: Maintained +F: board/atmel/at91sam9261ek/ +F: include/configs/at91sam9261ek.h +F: configs/at91sam9261ek_dataflash_cs0_defconfig +F: configs/at91sam9261ek_dataflash_cs3_defconfig +F: configs/at91sam9261ek_nandflash_defconfig +F: configs/at91sam9g10ek_dataflash_cs0_defconfig +F: configs/at91sam9g10ek_dataflash_cs3_defconfig +F: configs/at91sam9g10ek_nandflash_defconfig
board/atmel/at91sam9263ek/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +AT91SAM9263EK BOARD +M: Stelian Pop <[email protected]> +S: Maintained +F: board/atmel/at91sam9263ek/ +F: include/configs/at91sam9263ek.h +F: configs/at91sam9263ek_dataflash_defconfig +F: configs/at91sam9263ek_dataflash_cs0_defconfig +F: configs/at91sam9263ek_nandflash_defconfig +F: configs/at91sam9263ek_norflash_defconfig +F: configs/at91sam9263ek_norflash_boot_defconfig
board/atmel/at91sam9m10g45ek/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +AT91SAM9M10G45EK BOARD +M: Bo Shen <[email protected]> +S: Maintained +F: board/atmel/at91sam9m10g45ek/ +F: include/configs/at91sam9m10g45ek.h +F: configs/at91sam9m10g45ek_mmc_defconfig +F: configs/at91sam9m10g45ek_nandflash_defconfig
board/atmel/at91sam9n12ek/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +AT91SAM9N12EK BOARD +M: Josh Wu <[email protected]> +S: Maintained +F: board/atmel/at91sam9n12ek/ +F: include/configs/at91sam9n12ek.h +F: configs/at91sam9n12ek_mmc_defconfig +F: configs/at91sam9n12ek_nandflash_defconfig +F: configs/at91sam9n12ek_spiflash_defconfig
board/atmel/at91sam9rlek/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +AT91SAM9RLEK BOARD +M: Stelian Pop <[email protected]> +S: Maintained +F: board/atmel/at91sam9rlek/ +F: include/configs/at91sam9rlek.h +F: configs/at91sam9rlek_dataflash_defconfig +F: configs/at91sam9rlek_nandflash_defconfig
board/atmel/at91sam9x5ek/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +AT91SAM9X5EK BOARD +M: Bo Shen <[email protected]> +S: Maintained +F: board/atmel/at91sam9x5ek/ +F: include/configs/at91sam9x5ek.h +F: configs/at91sam9x5ek_dataflash_defconfig +F: configs/at91sam9x5ek_mmc_defconfig +F: configs/at91sam9x5ek_nandflash_defconfig +F: configs/at91sam9x5ek_spiflash_defconfig
board/atmel/atngw100/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ATNGW100 BOARD +M: Haavard Skinnemoen <[email protected]> +S: Orphan (since 2014-06) +F: board/atmel/atngw100/ +F: include/configs/atngw100.h +F: configs/atngw100_defconfig
board/atmel/atngw100mkii/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ATNGW100MKII BOARD +M: Andreas Bie?mann <[email protected]> +S: Maintained +F: board/atmel/atngw100mkii/ +F: include/configs/atngw100mkii.h +F: configs/atngw100mkii_defconfig
board/atmel/atstk1000/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +ATSTK1000 BOARD +M: Haavard Skinnemoen <[email protected]> +S: Orphan (since 2014-06) +F: board/atmel/atstk1000/ +F: include/configs/atstk1002.h +F: configs/atstk1002_defconfig +F: include/configs/atstk1003.h +F: configs/atstk1003_defconfig +F: include/configs/atstk1004.h +F: configs/atstk1004_defconfig +F: include/configs/atstk1006.h +F: configs/atstk1006_defconfig
board/atmel/sama5d3_xplained/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SAMA5D3_XPLAINED BOARD +M: Bo Shen <[email protected]> +S: Maintained +F: board/atmel/sama5d3_xplained/ +F: include/configs/sama5d3_xplained.h +F: configs/sama5d3_xplained_mmc_defconfig +F: configs/sama5d3_xplained_nandflash_defconfig
board/atmel/sama5d3xek/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +SAMA5D3XEK BOARD +M: Bo Shen <[email protected]> +S: Maintained +F: board/atmel/sama5d3xek/ +F: include/configs/sama5d3xek.h +F: configs/sama5d3xek_mmc_defconfig +F: configs/sama5d3xek_nandflash_defconfig +F: configs/sama5d3xek_spiflash_defconfig
board/avionic-design/medcom-wide/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MEDCOM-WIDE BOARD +M: Alban Bedel <[email protected]> +S: Maintained +F: board/avionic-design/medcom-wide/ +F: include/configs/medcom-wide.h +F: configs/medcom-wide_defconfig
board/avionic-design/plutux/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PLUTUX BOARD +M: Alban Bedel <[email protected]> +S: Maintained +F: board/avionic-design/plutux/ +F: include/configs/plutux.h +F: configs/plutux_defconfig
board/avionic-design/tec-ng/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TEC-NG BOARD +M: Alban Bedel <[email protected]> +S: Maintained +F: board/avionic-design/tec-ng/ +F: include/configs/tec-ng.h +F: configs/tec-ng_defconfig
board/avionic-design/tec/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TEC BOARD +M: Alban Bedel <[email protected]> +S: Maintained +F: board/avionic-design/tec/ +F: include/configs/tec.h +F: configs/tec_defconfig
board/avnet/fx12mm/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +FX12MM BOARD +M: Georg Schardt <[email protected]> +S: Maintained +F: board/avnet/fx12mm/ +F: include/configs/fx12mm.h +F: configs/fx12mm_defconfig +F: configs/fx12mm_flash_defconfig
board/avnet/v5fx30teval/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +V5FX30TEVAL BOARD +M: Ricardo Ribalda <[email protected]> +S: Maintained +F: board/avnet/v5fx30teval/ +F: include/configs/v5fx30teval.h +F: configs/v5fx30teval_defconfig +F: configs/v5fx30teval_flash_defconfig
board/balloon3/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BALLOON3 BOARD +M: Marek Vasut <[email protected]> +S: Maintained +F: board/balloon3/ +F: include/configs/balloon3.h +F: configs/balloon3_defconfig
board/barco/titanium/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TITANIUM BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/barco/titanium/ +F: include/configs/titanium.h +F: configs/titanium_defconfig
board/bc3450/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BC3450 BOARD +M: - +S: Maintained +F: board/bc3450/ +F: include/configs/BC3450.h +F: configs/BC3450_defconfig
board/bct-brettl2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BCT-BRETTL2 BOARD +M: Peter Meerwald <[email protected]> +S: Maintained +F: board/bct-brettl2/ +F: include/configs/bct-brettl2.h +F: configs/bct-brettl2_defconfig
board/bf506f-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF506F-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf506f-ezkit/ +F: include/configs/bf506f-ezkit.h +F: configs/bf506f-ezkit_defconfig
board/bf518f-ezbrd/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF518F-EZBRD BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf518f-ezbrd/ +F: include/configs/bf518f-ezbrd.h +F: configs/bf518f-ezbrd_defconfig
board/bf525-ucr2/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +BF525-UCR2 BOARD +M: Haitao Zhang <[email protected]> +M: Chong Huang <[email protected]> +S: Maintained +F: board/bf525-ucr2/ +F: include/configs/bf525-ucr2.h +F: configs/bf525-ucr2_defconfig
board/bf526-ezbrd/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF526-EZBRD BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf526-ezbrd/ +F: include/configs/bf526-ezbrd.h +F: configs/bf526-ezbrd_defconfig
board/bf527-ad7160-eval/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF527-AD7160-EVAL BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf527-ad7160-eval/ +F: include/configs/bf527-ad7160-eval.h +F: configs/bf527-ad7160-eval_defconfig
board/bf527-ezkit/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +BF527-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf527-ezkit/ +F: include/configs/bf527-ezkit.h +F: configs/bf527-ezkit_defconfig +F: configs/bf527-ezkit-v2_defconfig
board/bf527-sdp/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF527-SDP BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf527-sdp/ +F: include/configs/bf527-sdp.h +F: configs/bf527-sdp_defconfig
board/bf533-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF533-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf533-ezkit/ +F: include/configs/bf533-ezkit.h +F: configs/bf533-ezkit_defconfig
board/bf533-stamp/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF533-STAMP BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf533-stamp/ +F: include/configs/bf533-stamp.h +F: configs/bf533-stamp_defconfig
board/bf537-minotaur/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF537-MINOTAUR BOARD +M: Martin Strubel <[email protected]> +S: Maintained +F: board/bf537-minotaur/ +F: include/configs/bf537-minotaur.h +F: configs/bf537-minotaur_defconfig
board/bf537-pnav/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF537-PNAV BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf537-pnav/ +F: include/configs/bf537-pnav.h +F: configs/bf537-pnav_defconfig
board/bf537-srv1/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF537-SRV1 BOARD +M: Martin Strubel <[email protected]> +S: Maintained +F: board/bf537-srv1/ +F: include/configs/bf537-srv1.h +F: configs/bf537-srv1_defconfig
board/bf537-stamp/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF537-STAMP BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf537-stamp/ +F: include/configs/bf537-stamp.h +F: configs/bf537-stamp_defconfig
board/bf538f-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF538F-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf538f-ezkit/ +F: include/configs/bf538f-ezkit.h +F: configs/bf538f-ezkit_defconfig
board/bf548-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF548-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf548-ezkit/ +F: include/configs/bf548-ezkit.h +F: configs/bf548-ezkit_defconfig
board/bf561-acvilon/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF561-ACVILON BOARD +M: Valentin Yakovenkov <[email protected]> +S: Maintained +F: board/bf561-acvilon/ +F: include/configs/bf561-acvilon.h +F: configs/bf561-acvilon_defconfig
board/bf561-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF561-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf561-ezkit/ +F: include/configs/bf561-ezkit.h +F: configs/bf561-ezkit_defconfig
board/bf609-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BF609-EZKIT BOARD +M: Sonic Zhang <[email protected]> +S: Maintained +F: board/bf609-ezkit/ +F: include/configs/bf609-ezkit.h +F: configs/bf609-ezkit_defconfig
board/blackstamp/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +BLACKSTAMP BOARD +M: Wojtek Skulski <[email protected]> +M: Wojtek Skulski <[email protected]> +M: Benjamin Matthews <[email protected]> +S: Maintained +F: board/blackstamp/ +F: include/configs/blackstamp.h +F: configs/blackstamp_defconfig
board/blackvme/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +BLACKVME BOARD +M: Wojtek Skulski <[email protected]> +M: Wojtek Skulski <[email protected]> +M: Benjamin Matthews <[email protected]> +S: Maintained +F: board/blackvme/ +F: include/configs/blackvme.h +F: configs/blackvme_defconfig
board/bluegiga/apx4devkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +APX4DEVKIT BOARD +M: Lauri Hintsala <[email protected]> +S: Maintained +F: board/bluegiga/apx4devkit/ +F: include/configs/apx4devkit.h +F: configs/apx4devkit_defconfig
board/bluewater/snapper9260/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SNAPPER9260 BOARD +M: Ryan Mallon <[email protected]> +S: Maintained +F: board/bluewater/snapper9260/ +F: include/configs/snapper9260.h +F: configs/snapper9260_defconfig +F: configs/snapper9g20_defconfig
board/boundary/nitrogen6x/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +NITROGEN6X BOARD +M: Eric Nelson <[email protected]> +S: Maintained +F: board/boundary/nitrogen6x/ +F: include/configs/nitrogen6x.h +F: configs/mx6qsabrelite_defconfig +F: configs/nitrogen6dl_defconfig +F: configs/nitrogen6dl2g_defconfig +F: configs/nitrogen6q_defconfig +F: configs/nitrogen6q2g_defconfig +F: configs/nitrogen6s_defconfig +F: configs/nitrogen6s1g_defconfig
board/br4/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BR4 BOARD +M: Dimitar Penev <[email protected]> +S: Maintained +F: board/br4/ +F: include/configs/br4.h +F: configs/br4_defconfig
board/broadcom/bcm28155_ap/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +BCM28155_AP BOARD +M: Tim Kryger <[email protected]> +S: Maintained +F: board/broadcom/bcm28155_ap/ +F: include/configs/bcm28155_ap.h +F: configs/bcm28155_ap_defconfig
board/buffalo/lsxl/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +LSXL BOARD +M: Michael Walle <[email protected]> +S: Maintained +F: board/buffalo/lsxl/ +F: include/configs/lsxl.h +F: configs/lschlv2_defconfig +F: configs/lsxhl_defconfig
board/calao/sbc35_a9g20/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SBC35_A9G20 BOARD +M: Albin Tonnerre <[email protected]> +S: Orphan (since 2014-06) +F: board/calao/sbc35_a9g20/ +F: include/configs/sbc35_a9g20.h +F: configs/sbc35_a9g20_eeprom_defconfig +F: configs/sbc35_a9g20_nandflash_defconfig
board/calao/tny_a9260/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +TNY_A9260 BOARD +M: Albin Tonnerre <[email protected]> +S: Orphan (since 2014-06) +F: board/calao/tny_a9260/ +F: include/configs/tny_a9260.h +F: configs/tny_a9260_eeprom_defconfig +F: configs/tny_a9260_nandflash_defconfig +F: configs/tny_a9g20_eeprom_defconfig +F: configs/tny_a9g20_nandflash_defconfig
board/calao/usb_a9263/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +USB_A9263 BOARD +M: Mateusz Kulikowski <[email protected]> +S: Maintained +F: board/calao/usb_a9263/ +F: include/configs/usb_a9263.h +F: configs/usb_a9263_dataflash_defconfig
board/canmb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CANMB BOARD +M: - +S: Maintained +F: board/canmb/ +F: include/configs/canmb.h +F: configs/canmb_defconfig
board/chromebook-x86/coreboot/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +COREBOOT BOARD +M: Simon Glass <[email protected]> +S: Maintained +F: board/chromebook-x86/coreboot/ +F: include/configs/coreboot.h +F: configs/coreboot-x86_defconfig
board/cirrus/edb93xx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EDB93XX BOARD +M: Sergey Kostanbaev <[email protected]> +S: Maintained +F: board/cirrus/edb93xx/ +F: include/configs/edb93xx.h +F: configs/edb9315a_defconfig
board/cloudengines/pogo_e02/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +POGO_E02 BOARD +M: Dave Purdy <[email protected]> +S: Maintained +F: board/cloudengines/pogo_e02/ +F: include/configs/pogo_e02.h +F: configs/pogo_e02_defconfig
board/cm-bf527/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM-BF527 BOARD +M: Bluetechnix Tinyboards <[email protected]> +S: Orphan (since 2014-03) +F: board/cm-bf527/ +F: include/configs/cm-bf527.h +F: configs/cm-bf527_defconfig
board/cm-bf533/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM-BF533 BOARD +M: Bluetechnix Tinyboards <[email protected]> +S: Orphan (since 2014-03) +F: board/cm-bf533/ +F: include/configs/cm-bf533.h +F: configs/cm-bf533_defconfig
board/cm-bf537e/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM-BF537E BOARD +M: Bluetechnix Tinyboards <[email protected]> +S: Orphan (since 2014-03) +F: board/cm-bf537e/ +F: include/configs/cm-bf537e.h +F: configs/cm-bf537e_defconfig
board/cm-bf537u/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM-BF537U BOARD +M: Bluetechnix Tinyboards <[email protected]> +S: Orphan (since 2014-03) +F: board/cm-bf537u/ +F: include/configs/cm-bf537u.h +F: configs/cm-bf537u_defconfig
board/cm-bf548/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM-BF548 BOARD +M: Bluetechnix Tinyboards <[email protected]> +S: Orphan (since 2014-03) +F: board/cm-bf548/ +F: include/configs/cm-bf548.h +F: configs/cm-bf548_defconfig
board/cm-bf561/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM-BF561 BOARD +M: Bluetechnix Tinyboards <[email protected]> +S: Orphan (since 2014-03) +F: board/cm-bf561/ +F: include/configs/cm-bf561.h +F: configs/cm-bf561_defconfig
board/cm4008/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM4008 BOARD +M: Greg Ungerer <[email protected]> +S: Maintained +F: board/cm4008/ +F: include/configs/cm4008.h +F: configs/cm4008_defconfig
board/cm41xx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM41XX BOARD +M: - +S: Maintained +F: board/cm41xx/ +F: include/configs/cm41xx.h +F: configs/cm41xx_defconfig
board/cm5200/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM5200 BOARD +M: - +S: Maintained +F: board/cm5200/ +F: include/configs/cm5200.h +F: configs/cm5200_defconfig
board/cmi/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CMI BOARD +M: - +S: Maintained +F: board/cmi/ +F: include/configs/cmi_mpc5xx.h +F: configs/cmi_mpc5xx_defconfig
board/cobra5272/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +COBRA5272 BOARD +M: - +S: Maintained +F: board/cobra5272/ +F: include/configs/cobra5272.h +F: configs/cobra5272_defconfig
board/cogent/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +COGENT BOARD +M: Murray Jensen <[email protected]> +S: Maintained +F: board/cogent/ +F: include/configs/cogent_mpc8260.h +F: configs/cogent_mpc8260_defconfig +F: include/configs/cogent_mpc8xx.h +F: configs/cogent_mpc8xx_defconfig
board/comelit/dig297/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DIG297 BOARD +M: Luca Ceresoli <[email protected]> +S: Maintained +F: board/comelit/dig297/ +F: include/configs/dig297.h +F: configs/dig297_defconfig
board/compal/paz00/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +PAZ00 BOARD +M: Tom Warren <[email protected]> +M: Stephen Warren <[email protected]> +S: Maintained +F: board/compal/paz00/ +F: include/configs/paz00.h +F: configs/paz00_defconfig
board/compulab/cm_t335/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM_T335 BOARD +M: Igor Grinberg <[email protected]> +S: Maintained +F: board/compulab/cm_t335/ +F: include/configs/cm_t335.h +F: configs/cm_t335_defconfig
board/compulab/cm_t35/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM_T35 BOARD +M: Igor Grinberg <[email protected]> +S: Maintained +F: board/compulab/cm_t35/ +F: include/configs/cm_t35.h +F: configs/cm_t35_defconfig
board/compulab/cm_t54/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CM_T54 BOARD +M: Dmitry Lifshitz <[email protected]> +S: Maintained +F: board/compulab/cm_t54/ +F: include/configs/cm_t54.h +F: configs/cm_t54_defconfig
board/compulab/trimslice/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +TRIMSLICE BOARD +M: Tom Warren <[email protected]> +M: Stephen Warren <[email protected]> +S: Maintained +F: board/compulab/trimslice/ +F: include/configs/trimslice.h +F: configs/trimslice_defconfig
board/congatec/cgtqmx6eval/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CGTQMX6EVAL BOARD +M: Leo Sartre <[email protected]> +S: Orphan (since 2014-06) +F: board/congatec/cgtqmx6eval/ +F: include/configs/cgtqmx6eval.h +F: configs/cgtqmx6qeval_defconfig
board/corscience/tricorder/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +TRICORDER BOARD +M: Thomas Weber <[email protected]> +S: Maintained +F: board/corscience/tricorder/ +F: include/configs/tricorder.h +F: configs/tricorder_defconfig +F: configs/tricorder_flash_defconfig
board/cpc45/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +CPC45 BOARD +M: Josef Wagner <[email protected]> +S: Maintained +F: board/cpc45/ +F: include/configs/CPC45.h +F: configs/CPC45_defconfig +F: configs/CPC45_ROMBOOT_defconfig
board/cpu86/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +CPU86 BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/cpu86/ +F: include/configs/CPU86.h +F: configs/CPU86_defconfig +F: configs/CPU86_ROMBOOT_defconfig
board/cpu87/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +CPU87 BOARD +M: - +S: Maintained +F: board/cpu87/ +F: include/configs/CPU87.h +F: configs/CPU87_defconfig +F: configs/CPU87_ROMBOOT_defconfig
board/cray/L1/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +L1 BOARD +M: David Updegraff <[email protected]> +S: Orphan (since 2014-03) +F: board/cray/L1/ +F: include/configs/CRAYL1.h +F: configs/CRAYL1_defconfig
board/creative/xfi3/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +XFI3 BOARD +M: Marek Vasut <[email protected]> +S: Maintained +F: board/creative/xfi3/ +F: include/configs/xfi3.h +F: configs/xfi3_defconfig
board/csb272/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CSB272 BOARD +M: Tolunay Orkun <[email protected]> +S: Maintained +F: board/csb272/ +F: include/configs/csb272.h +F: configs/csb272_defconfig
board/csb472/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CSB472 BOARD +M: Tolunay Orkun <[email protected]> +S: Maintained +F: board/csb472/ +F: include/configs/csb472.h +F: configs/csb472_defconfig
board/cu824/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CU824 BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/cu824/ +F: include/configs/CU824.h +F: configs/CU824_defconfig
board/d-link/dns325/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DNS325 BOARD +M: Stefan Herbrechtsmeier <[email protected]> +S: Maintained +F: board/d-link/dns325/ +F: include/configs/dns325.h +F: configs/dns325_defconfig
board/dave/PPChameleonEVB/MAINTAINERS new file +20 -0
@@ -0,0 +1,20 @@ +PPCHAMELEONEVB BOARD +M: - +S: Maintained +F: board/dave/PPChameleonEVB/ +F: include/configs/CATcenter.h +F: configs/CATcenter_defconfig +F: configs/CATcenter_25_defconfig +F: configs/CATcenter_33_defconfig + +PPCHAMELEONEVB BOARD +M: Andrea "llandre" Marson <[email protected]> +S: Maintained +F: include/configs/PPChameleonEVB.h +F: configs/PPChameleonEVB_defconfig +F: configs/PPChameleonEVB_BA_25_defconfig +F: configs/PPChameleonEVB_BA_33_defconfig +F: configs/PPChameleonEVB_HI_25_defconfig +F: configs/PPChameleonEVB_HI_33_defconfig +F: configs/PPChameleonEVB_ME_25_defconfig +F: configs/PPChameleonEVB_ME_33_defconfig
board/davedenx/aria/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ARIA BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/davedenx/aria/ +F: include/configs/aria.h +F: configs/aria_defconfig
board/davedenx/qong/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +QONG BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/davedenx/qong/ +F: include/configs/qong.h +F: configs/qong_defconfig
board/davinci/da8xxevm/MAINTAINERS new file +22 -0
@@ -0,0 +1,22 @@ +DA8XXEVM BOARD +M: Nick Thompson <[email protected]> +S: Maintained +F: board/davinci/da8xxevm/ +F: include/configs/da830evm.h +F: configs/da830evm_defconfig + +DA850_AM18XXEVM BOARD +M: Sudhakar Rajashekhara <[email protected]> +S: Maintained +F: include/configs/da850evm.h +F: configs/da850_am18xxevm_defconfig +F: configs/da850evm_defconfig +F: configs/da850evm_direct_nor_defconfig + +HAWKBOARD BOARD +M: Syed Mohammed Khasim <[email protected]> +M: Sughosh Ganu <[email protected]> +S: Maintained +F: include/configs/hawkboard.h +F: configs/hawkboard_defconfig +F: configs/hawkboard_uart_defconfig
board/davinci/dm355evm/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DM355EVM BOARD +M: Sandeep Paulraj <[email protected]> +S: Maintained +F: board/davinci/dm355evm/ +F: include/configs/davinci_dm355evm.h +F: configs/davinci_dm355evm_defconfig
board/davinci/dm355leopard/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DM355LEOPARD BOARD +M: Sandeep Paulraj <[email protected]> +S: Maintained +F: board/davinci/dm355leopard/ +F: include/configs/davinci_dm355leopard.h +F: configs/davinci_dm355leopard_defconfig
board/davinci/dm365evm/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DM365EVM BOARD +M: Sandeep Paulraj <[email protected]> +S: Maintained +F: board/davinci/dm365evm/ +F: include/configs/davinci_dm365evm.h +F: configs/davinci_dm365evm_defconfig
board/davinci/dm6467evm/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +DM6467EVM BOARD +M: Sandeep Paulraj <[email protected]> +S: Maintained +F: board/davinci/dm6467evm/ +F: include/configs/davinci_dm6467evm.h +F: configs/davinci_dm6467evm_defconfig +F: configs/davinci_dm6467Tevm_defconfig
board/davinci/dvevm/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DVEVM BOARD +M: - +S: Maintained +F: board/davinci/dvevm/ +F: include/configs/davinci_dvevm.h +F: configs/davinci_dvevm_defconfig
board/davinci/ea20/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EA20 BOARD +M: Stefano Babic <[email protected]> +S: Maintained +F: board/davinci/ea20/ +F: include/configs/ea20.h +F: configs/ea20_defconfig
board/davinci/schmoogie/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +SCHMOOGIE BOARD +M: - +S: Maintained +F: board/davinci/schmoogie/ +F: include/configs/davinci_schmoogie.h +F: configs/davinci_schmoogie_defconfig
board/davinci/sffsdr/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +SFFSDR BOARD +M: - +S: Maintained +F: board/davinci/sffsdr/ +F: include/configs/davinci_sffsdr.h +F: configs/davinci_sffsdr_defconfig
board/davinci/sonata/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +SONATA BOARD +M: - +S: Maintained +F: board/davinci/sonata/ +F: include/configs/davinci_sonata.h +F: configs/davinci_sonata_defconfig
board/dbau1x00/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +DBAU1X00 BOARD +M: Thomas Lange <[email protected]> +S: Maintained +F: board/dbau1x00/ +F: include/configs/dbau1x00.h +F: configs/dbau1000_defconfig +F: configs/dbau1100_defconfig +F: configs/dbau1500_defconfig +F: configs/dbau1550_defconfig +F: configs/dbau1550_el_defconfig
board/denx/m28evk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M28EVK BOARD +M: Marek Vasut <[email protected]> +S: Maintained +F: board/denx/m28evk/ +F: include/configs/m28evk.h +F: configs/m28evk_defconfig
board/denx/m53evk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M53EVK BOARD +M: Marek Vasut <[email protected]> +S: Maintained +F: board/denx/m53evk/ +F: include/configs/m53evk.h +F: configs/m53evk_defconfig
board/dnp5370/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DNP5370 BOARD +M: M.Hasewinkel (MHA) <[email protected]> +S: Maintained +F: board/dnp5370/ +F: include/configs/dnp5370.h +F: configs/dnp5370_defconfig
board/eXalion/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EXALION BOARD +M: Torsten Demke <[email protected]> +S: Maintained +F: board/eXalion/ +F: include/configs/eXalion.h +F: configs/eXalion_defconfig
board/earthlcd/favr-32-ezkit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +FAVR-32-EZKIT BOARD +M: Hans-Christian Egtvedt <[email protected]> +S: Orphan (since 2014-06) +F: board/earthlcd/favr-32-ezkit/ +F: include/configs/favr-32-ezkit.h +F: configs/favr-32-ezkit_defconfig
board/egnite/ethernut5/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ETHERNUT5 BOARD +M: egnite GmbH <[email protected]> +S: Maintained +F: board/egnite/ethernut5/ +F: include/configs/ethernut5.h +F: configs/ethernut5_defconfig
board/eltec/elppc/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ELPPC BOARD +M: - +S: Maintained +F: board/eltec/elppc/ +F: include/configs/ELPPC.h +F: configs/ELPPC_defconfig
board/eltec/mhpc/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MHPC BOARD +M: Frank Gottschling <[email protected]> +S: Maintained +F: board/eltec/mhpc/ +F: include/configs/MHPC.h +F: configs/MHPC_defconfig
board/embest/mx6boards/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MX6BOARDS BOARD +M: Eric B?nard <[email protected]> +S: Maintained +F: board/embest/mx6boards/ +F: include/configs/embestmx6boards.h +F: configs/marsboard_defconfig +F: configs/riotboard_defconfig
board/emk/top5200/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +TOP5200 BOARD +M: Reinhard Meyer <[email protected]> +S: Maintained +F: board/emk/top5200/ +F: include/configs/TOP5200.h +F: configs/EVAL5200_defconfig +F: configs/MINI5200_defconfig +F: configs/TOP5200_defconfig
board/emk/top860/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TOP860 BOARD +M: Reinhard Meyer <[email protected]> +S: Maintained +F: board/emk/top860/ +F: include/configs/TOP860.h +F: configs/TOP860_defconfig
board/emk/top9000/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +TOP9000 BOARD +M: Reinhard Meyer <[email protected]> +S: Maintained +F: board/emk/top9000/ +F: include/configs/top9000.h +F: configs/top9000eval_xe_defconfig +F: configs/top9000su_xe_defconfig
board/enbw/enbw_cmc/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ENBW_CMC BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/enbw/enbw_cmc/ +F: include/configs/enbw_cmc.h +F: configs/enbw_cmc_defconfig
board/ep8260/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EP8260 BOARD +M: Frank Panno <[email protected]> +S: Orphan (since 2014-06) +F: board/ep8260/ +F: include/configs/ep8260.h +F: configs/ep8260_defconfig
board/ep82xxm/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EP82XXM BOARD +M: - +S: Maintained +F: board/ep82xxm/ +F: include/configs/ep82xxm.h +F: configs/ep82xxm_defconfig
board/esd/apc405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +APC405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/apc405/ +F: include/configs/APC405.h +F: configs/APC405_defconfig
board/esd/ar405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +AR405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/ar405/ +F: include/configs/AR405.h +F: configs/AR405_defconfig
board/esd/ash405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ASH405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/ash405/ +F: include/configs/ASH405.h +F: configs/ASH405_defconfig
board/esd/cms700/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CMS700 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/cms700/ +F: include/configs/CMS700.h +F: configs/CMS700_defconfig
board/esd/cpci2dp/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CPCI2DP BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/cpci2dp/ +F: include/configs/CPCI2DP.h +F: configs/CPCI2DP_defconfig
board/esd/cpci405/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +CPCI405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/cpci405/ +F: include/configs/CPCI405.h +F: configs/CPCI405_defconfig +F: include/configs/CPCI4052.h +F: configs/CPCI4052_defconfig +F: include/configs/CPCI405AB.h +F: configs/CPCI405AB_defconfig +F: include/configs/CPCI405DT.h +F: configs/CPCI405DT_defconfig
board/esd/cpci5200/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CPCI5200 BOARD +M: Reinhard Arlt <[email protected]> +S: Maintained +F: board/esd/cpci5200/ +F: include/configs/cpci5200.h +F: configs/cpci5200_defconfig
board/esd/cpci750/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CPCI750 BOARD +M: Reinhard Arlt <[email protected]> +S: Maintained +F: board/esd/cpci750/ +F: include/configs/CPCI750.h +F: configs/CPCI750_defconfig
board/esd/cpciiser4/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +CPCIISER4 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/cpciiser4/ +F: include/configs/CPCIISER4.h +F: configs/CPCIISER4_defconfig
board/esd/dp405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DP405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/dp405/ +F: include/configs/DP405.h +F: configs/DP405_defconfig
board/esd/du405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DU405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/du405/ +F: include/configs/DU405.h +F: configs/DU405_defconfig
board/esd/du440/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DU440 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/du440/ +F: include/configs/DU440.h +F: configs/DU440_defconfig
board/esd/hh405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HH405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/hh405/ +F: include/configs/HH405.h +F: configs/HH405_defconfig
board/esd/hub405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HUB405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/hub405/ +F: include/configs/HUB405.h +F: configs/HUB405_defconfig
board/esd/mecp5123/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MECP5123 BOARD +M: Reinhard Arlt <[email protected]> +S: Maintained +F: board/esd/mecp5123/ +F: include/configs/mecp5123.h +F: configs/mecp5123_defconfig
board/esd/mecp5200/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MECP5200 BOARD +M: Reinhard Arlt <[email protected]> +S: Maintained +F: board/esd/mecp5200/ +F: include/configs/mecp5200.h +F: configs/mecp5200_defconfig
board/esd/meesc/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MEESC BOARD +M: Daniel Gorsulowski <[email protected]> +S: Maintained +F: board/esd/meesc/ +F: include/configs/meesc.h +F: configs/meesc_defconfig +F: configs/meesc_dataflash_defconfig
board/esd/ocrtc/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +OCRTC BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/ocrtc/ +F: include/configs/OCRTC.h +F: configs/OCRTC_defconfig
board/esd/otc570/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +OTC570 BOARD +M: Daniel Gorsulowski <[email protected]> +S: Maintained +F: board/esd/otc570/ +F: include/configs/otc570.h +F: configs/otc570_defconfig +F: configs/otc570_dataflash_defconfig
board/esd/pci405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PCI405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/pci405/ +F: include/configs/PCI405.h +F: configs/PCI405_defconfig
board/esd/pf5200/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PF5200 BOARD +M: Reinhard Arlt <[email protected]> +S: Maintained +F: board/esd/pf5200/ +F: include/configs/pf5200.h +F: configs/pf5200_defconfig
board/esd/plu405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PLU405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/plu405/ +F: include/configs/PLU405.h +F: configs/PLU405_defconfig
board/esd/pmc405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PMC405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/pmc405/ +F: include/configs/PMC405.h +F: configs/PMC405_defconfig
board/esd/pmc405de/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PMC405DE BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/pmc405de/ +F: include/configs/PMC405DE.h +F: configs/PMC405DE_defconfig
board/esd/pmc440/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PMC440 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/pmc440/ +F: include/configs/PMC440.h +F: configs/PMC440_defconfig
board/esd/tasreg/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TASREG BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/tasreg/ +F: include/configs/TASREG.h +F: configs/TASREG_defconfig
board/esd/vme8349/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +VME8349 BOARD +M: Reinhard Arlt <[email protected]> +S: Maintained +F: board/esd/vme8349/ +F: include/configs/vme8349.h +F: configs/caddy2_defconfig +F: configs/vme8349_defconfig
board/esd/voh405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +VOH405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/voh405/ +F: include/configs/VOH405.h +F: configs/VOH405_defconfig
board/esd/vom405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +VOM405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/vom405/ +F: include/configs/VOM405.h +F: configs/VOM405_defconfig
board/esd/wuh405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +WUH405 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/esd/wuh405/ +F: include/configs/WUH405.h +F: configs/WUH405_defconfig
board/esg/ima3-mx53/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IMA3-MX53 BOARD +M: - +S: Maintained +F: board/esg/ima3-mx53/ +F: include/configs/ima3-mx53.h +F: configs/ima3-mx53_defconfig
board/espt/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ESPT BOARD +M: - +S: Maintained +F: board/espt/ +F: include/configs/espt.h +F: configs/espt_defconfig
board/esteem192e/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ESTEEM192E BOARD +M: Conn Clark <[email protected]> +S: Maintained +F: board/esteem192e/ +F: include/configs/ESTEEM192E.h +F: configs/ESTEEM192E_defconfig
board/eukrea/cpu9260/MAINTAINERS new file +13 -0
@@ -0,0 +1,13 @@ +CPU9260 BOARD +M: Eric Benard <[email protected]> +S: Maintained +F: board/eukrea/cpu9260/ +F: include/configs/cpu9260.h +F: configs/cpu9260_defconfig +F: configs/cpu9260_128M_defconfig +F: configs/cpu9260_nand_defconfig +F: configs/cpu9260_nand_128M_defconfig +F: configs/cpu9G20_defconfig +F: configs/cpu9G20_128M_defconfig +F: configs/cpu9G20_nand_defconfig +F: configs/cpu9G20_nand_128M_defconfig
board/eukrea/cpuat91/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +CPUAT91 BOARD +M: Eric Benard <[email protected]> +S: Maintained +F: board/eukrea/cpuat91/ +F: include/configs/cpuat91.h +F: configs/cpuat91_defconfig +F: configs/cpuat91_ram_defconfig
board/evb64260/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +EVB64260 BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/evb64260/ +F: include/configs/P3G4.h +F: configs/P3G4_defconfig + +ZUMA BOARD +M: Nye Liu <[email protected]> +S: Orphan (since 2014-04) +F: include/configs/ZUMA.h +F: configs/ZUMA_defconfig
board/exmeritus/hww1u1a/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HWW1U1A BOARD +M: Kyle Moffett <[email protected]> +S: Orphan (since 2014-06) +F: board/exmeritus/hww1u1a/ +F: include/configs/HWW1U1A.h +F: configs/HWW1U1A_defconfig
board/faraday/a320evb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +A320EVB BOARD +M: Po-Yu Chuang <[email protected]> +S: Maintained +F: board/faraday/a320evb/ +F: include/configs/a320evb.h +F: configs/a320evb_defconfig
board/flagadm/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +FLAGADM BOARD +M: K?ri Dav??sson <[email protected]> +S: Orphan (since 2014-06) +F: board/flagadm/ +F: include/configs/FLAGADM.h +F: configs/FLAGADM_defconfig
board/freescale/b4860qds/MAINTAINERS new file +17 -0
@@ -0,0 +1,17 @@ +B4860QDS BOARD +M: - +S: Maintained +F: board/freescale/b4860qds/ +F: include/configs/B4860QDS.h +F: configs/B4420QDS_defconfig +F: configs/B4420QDS_NAND_defconfig +F: configs/B4420QDS_SPIFLASH_defconfig +F: configs/B4860QDS_defconfig +F: configs/B4860QDS_NAND_defconfig +F: configs/B4860QDS_SPIFLASH_defconfig +F: configs/B4860QDS_SRIO_PCIE_BOOT_defconfig + +B4860QDS_SECURE_BOOT BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/B4860QDS_SECURE_BOOT_defconfig
board/freescale/bsc9131rdb/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +BSC9131RDB BOARD +M: Poonam Aggrwal <[email protected]> +S: Maintained +F: board/freescale/bsc9131rdb/ +F: include/configs/BSC9131RDB.h +F: configs/BSC9131RDB_NAND_defconfig +F: configs/BSC9131RDB_NAND_SYSCLK100_defconfig +F: configs/BSC9131RDB_SPIFLASH_defconfig +F: configs/BSC9131RDB_SPIFLASH_SYSCLK100_defconfig
board/freescale/bsc9132qds/MAINTAINERS new file +25 -0
@@ -0,0 +1,25 @@ +BSC9132QDS BOARD +M: Naveen Burmi <[email protected]> +S: Maintained +F: board/freescale/bsc9132qds/ +F: include/configs/BSC9132QDS.h +F: configs/BSC9132QDS_NAND_DDRCLK100_defconfig +F: configs/BSC9132QDS_NAND_DDRCLK133_defconfig +F: configs/BSC9132QDS_NOR_DDRCLK100_defconfig +F: configs/BSC9132QDS_NOR_DDRCLK133_defconfig +F: configs/BSC9132QDS_SDCARD_DDRCLK100_defconfig +F: configs/BSC9132QDS_SDCARD_DDRCLK133_defconfig +F: configs/BSC9132QDS_SPIFLASH_DDRCLK100_defconfig +F: configs/BSC9132QDS_SPIFLASH_DDRCLK133_defconfig + +BSC9132QDS_NAND_DDRCLK100_SECURE BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig +F: configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig +F: configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig +F: configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig +F: configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig +F: configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig +F: configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig +F: configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig
board/freescale/c29xpcie/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +C29XPCIE BOARD +M: Po Liu <[email protected]> +S: Maintained +F: board/freescale/c29xpcie/ +F: include/configs/C29XPCIE.h +F: configs/C29XPCIE_defconfig +F: configs/C29XPCIE_NAND_defconfig +F: configs/C29XPCIE_SPIFLASH_defconfig
board/freescale/corenet_ds/MAINTAINERS new file +29 -0
@@ -0,0 +1,29 @@ +CORENET_DS BOARD +M: - +S: Maintained +F: board/freescale/corenet_ds/ +F: include/configs/P3041DS.h +F: configs/P3041DS_defconfig +F: configs/P3041DS_NAND_defconfig +F: configs/P3041DS_SDCARD_defconfig +F: configs/P3041DS_SECURE_BOOT_defconfig +F: configs/P3041DS_SPIFLASH_defconfig +F: configs/P3041DS_SRIO_PCIE_BOOT_defconfig +F: include/configs/P4080DS.h +F: configs/P4080DS_defconfig +F: configs/P4080DS_SDCARD_defconfig +F: configs/P4080DS_SECURE_BOOT_defconfig +F: configs/P4080DS_SPIFLASH_defconfig +F: configs/P4080DS_SRIO_PCIE_BOOT_defconfig +F: include/configs/P5020DS.h +F: configs/P5020DS_defconfig +F: configs/P5020DS_NAND_defconfig +F: configs/P5020DS_SDCARD_defconfig +F: configs/P5020DS_SECURE_BOOT_defconfig +F: configs/P5020DS_SPIFLASH_defconfig +F: configs/P5020DS_SRIO_PCIE_BOOT_defconfig +F: include/configs/P5040DS.h +F: configs/P5040DS_defconfig +F: configs/P5040DS_NAND_defconfig +F: configs/P5040DS_SDCARD_defconfig +F: configs/P5040DS_SPIFLASH_defconfig
board/freescale/ls2085a/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +LS2085A BOARD +M: York Sun <[email protected]> +S: Maintained +F: board/freescale/ls2085a/ +F: include/configs/ls2085a_emu.h +F: configs/ls2085a_emu_defconfig +F: configs/ls2085a_emu_D4_defconfig +F: include/configs/ls2085a_simu.h +F: configs/ls2085a_simu_defconfig
board/freescale/m5208evbe/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5208EVBE BOARD +M: - +S: Maintained +F: board/freescale/m5208evbe/ +F: include/configs/M5208EVBE.h +F: configs/M5208EVBE_defconfig
board/freescale/m52277evb/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +M52277EVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m52277evb/ +F: include/configs/M52277EVB.h +F: configs/M52277EVB_defconfig +F: configs/M52277EVB_stmicro_defconfig
board/freescale/m5235evb/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +M5235EVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m5235evb/ +F: include/configs/M5235EVB.h +F: configs/M5235EVB_defconfig +F: configs/M5235EVB_Flash32_defconfig
board/freescale/m5249evb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5249EVB BOARD +M: - +S: Maintained +F: board/freescale/m5249evb/ +F: include/configs/M5249EVB.h +F: configs/M5249EVB_defconfig
board/freescale/m5253demo/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5253DEMO BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m5253demo/ +F: include/configs/M5253DEMO.h +F: configs/M5253DEMO_defconfig
board/freescale/m5253evbe/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5253EVBE BOARD +M: Hayden Fraser <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/m5253evbe/ +F: include/configs/M5253EVBE.h +F: configs/M5253EVBE_defconfig
board/freescale/m5272c3/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5272C3 BOARD +M: - +S: Maintained +F: board/freescale/m5272c3/ +F: include/configs/M5272C3.h +F: configs/M5272C3_defconfig
board/freescale/m5275evb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5275EVB BOARD +M: - +S: Maintained +F: board/freescale/m5275evb/ +F: include/configs/M5275EVB.h +F: configs/M5275EVB_defconfig
board/freescale/m5282evb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5282EVB BOARD +M: - +S: Maintained +F: board/freescale/m5282evb/ +F: include/configs/M5282EVB.h +F: configs/M5282EVB_defconfig
board/freescale/m53017evb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M53017EVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m53017evb/ +F: include/configs/M53017EVB.h +F: configs/M53017EVB_defconfig
board/freescale/m5329evb/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +M5329EVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m5329evb/ +F: include/configs/M5329EVB.h +F: configs/M5329AFEE_defconfig +F: configs/M5329BFEE_defconfig
board/freescale/m5373evb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +M5373EVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m5373evb/ +F: include/configs/M5373EVB.h +F: configs/M5373EVB_defconfig
board/freescale/m54418twr/MAINTAINERS new file +11 -0
@@ -0,0 +1,11 @@ +M54418TWR BOARD +M: - +S: Maintained +F: board/freescale/m54418twr/ +F: include/configs/M54418TWR.h +F: configs/M54418TWR_defconfig +F: configs/M54418TWR_nand_mii_defconfig +F: configs/M54418TWR_nand_rmii_defconfig +F: configs/M54418TWR_nand_rmii_lowfreq_defconfig +F: configs/M54418TWR_serial_mii_defconfig +F: configs/M54418TWR_serial_rmii_defconfig
board/freescale/m54451evb/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +M54451EVB BOARD +M: - +S: Maintained +F: board/freescale/m54451evb/ +F: include/configs/M54451EVB.h +F: configs/M54451EVB_defconfig +F: configs/M54451EVB_stmicro_defconfig
board/freescale/m54455evb/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +M54455EVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m54455evb/ +F: include/configs/M54455EVB.h +F: configs/M54455EVB_defconfig +F: configs/M54455EVB_a66_defconfig +F: configs/M54455EVB_i66_defconfig +F: configs/M54455EVB_intel_defconfig +F: configs/M54455EVB_stm33_defconfig
board/freescale/m547xevb/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +M547XEVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m547xevb/ +F: include/configs/M5475EVB.h +F: configs/M5475AFE_defconfig +F: configs/M5475BFE_defconfig +F: configs/M5475CFE_defconfig +F: configs/M5475DFE_defconfig +F: configs/M5475EFE_defconfig +F: configs/M5475FFE_defconfig +F: configs/M5475GFE_defconfig
board/freescale/m548xevb/MAINTAINERS new file +13 -0
@@ -0,0 +1,13 @@ +M548XEVB BOARD +M: TsiChung Liew <[email protected]> +S: Maintained +F: board/freescale/m548xevb/ +F: include/configs/M5485EVB.h +F: configs/M5485AFE_defconfig +F: configs/M5485BFE_defconfig +F: configs/M5485CFE_defconfig +F: configs/M5485DFE_defconfig +F: configs/M5485EFE_defconfig +F: configs/M5485FFE_defconfig +F: configs/M5485GFE_defconfig +F: configs/M5485HFE_defconfig
board/freescale/mpc5121ads/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC5121ADS BOARD +M: - +S: Maintained +F: board/freescale/mpc5121ads/ +F: include/configs/mpc5121ads.h +F: configs/mpc5121ads_defconfig +F: configs/mpc5121ads_rev2_defconfig
board/freescale/mpc7448hpc2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC7448HPC2 BOARD +M: Roy Zang <[email protected]> +S: Maintained +F: board/freescale/mpc7448hpc2/ +F: include/configs/mpc7448hpc2.h +F: configs/mpc7448hpc2_defconfig
board/freescale/mpc8266ads/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8266ADS BOARD +M: Rune Torgersen <[email protected]> +S: Maintained +F: board/freescale/mpc8266ads/ +F: include/configs/MPC8266ADS.h +F: configs/MPC8266ADS_defconfig
board/freescale/mpc8308rdb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8308RDB BOARD +M: Ilya Yanok <[email protected]> +S: Maintained +F: board/freescale/mpc8308rdb/ +F: include/configs/MPC8308RDB.h +F: configs/MPC8308RDB_defconfig
board/freescale/mpc8313erdb/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +MPC8313ERDB BOARD +M: - +S: Maintained +F: board/freescale/mpc8313erdb/ +F: include/configs/MPC8313ERDB.h +F: configs/MPC8313ERDB_33_defconfig +F: configs/MPC8313ERDB_66_defconfig +F: configs/MPC8313ERDB_NAND_33_defconfig +F: configs/MPC8313ERDB_NAND_66_defconfig
board/freescale/mpc8315erdb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8315ERDB BOARD +M: Dave Liu <[email protected]> +S: Maintained +F: board/freescale/mpc8315erdb/ +F: include/configs/MPC8315ERDB.h +F: configs/MPC8315ERDB_defconfig
board/freescale/mpc8323erdb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8323ERDB BOARD +M: Michael Barkowski <[email protected]> +S: Maintained +F: board/freescale/mpc8323erdb/ +F: include/configs/MPC8323ERDB.h +F: configs/MPC8323ERDB_defconfig
board/freescale/mpc832xemds/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +MPC832XEMDS BOARD +M: Dave Liu <[email protected]> +S: Maintained +F: board/freescale/mpc832xemds/ +F: include/configs/MPC832XEMDS.h +F: configs/MPC832XEMDS_defconfig +F: configs/MPC832XEMDS_ATM_defconfig +F: configs/MPC832XEMDS_HOST_33_defconfig +F: configs/MPC832XEMDS_HOST_66_defconfig +F: configs/MPC832XEMDS_SLAVE_defconfig
board/freescale/mpc8349emds/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8349EMDS BOARD +M: Kim Phillips <[email protected]> +S: Maintained +F: board/freescale/mpc8349emds/ +F: include/configs/MPC8349EMDS.h +F: configs/MPC8349EMDS_defconfig
board/freescale/mpc8349itx/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +MPC8349ITX BOARD +M: - +S: Maintained +F: board/freescale/mpc8349itx/ +F: include/configs/MPC8349ITX.h +F: configs/MPC8349ITX_defconfig +F: configs/MPC8349ITX_LOWBOOT_defconfig +F: configs/MPC8349ITXGP_defconfig
board/freescale/mpc8360emds/MAINTAINERS new file +15 -0
@@ -0,0 +1,15 @@ +MPC8360EMDS BOARD +M: Dave Liu <[email protected]> +S: Maintained +F: board/freescale/mpc8360emds/ +F: include/configs/MPC8360EMDS.h +F: configs/MPC8360EMDS_33_defconfig +F: configs/MPC8360EMDS_33_ATM_defconfig +F: configs/MPC8360EMDS_33_HOST_33_defconfig +F: configs/MPC8360EMDS_33_HOST_66_defconfig +F: configs/MPC8360EMDS_33_SLAVE_defconfig +F: configs/MPC8360EMDS_66_defconfig +F: configs/MPC8360EMDS_66_ATM_defconfig +F: configs/MPC8360EMDS_66_HOST_33_defconfig +F: configs/MPC8360EMDS_66_HOST_66_defconfig +F: configs/MPC8360EMDS_66_SLAVE_defconfig
board/freescale/mpc8360erdk/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC8360ERDK BOARD +M: Anton Vorontsov <[email protected]> +S: Orphan (since 2014-03) +F: board/freescale/mpc8360erdk/ +F: include/configs/MPC8360ERDK.h +F: configs/MPC8360ERDK_defconfig +F: configs/MPC8360ERDK_33_defconfig
board/freescale/mpc837xemds/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC837XEMDS BOARD +M: Dave Liu <[email protected]> +S: Maintained +F: board/freescale/mpc837xemds/ +F: include/configs/MPC837XEMDS.h +F: configs/MPC837XEMDS_defconfig +F: configs/MPC837XEMDS_HOST_defconfig
board/freescale/mpc837xerdb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC837XERDB BOARD +M: Joe D'Abbraccio <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/mpc837xerdb/ +F: include/configs/MPC837XERDB.h +F: configs/MPC837XERDB_defconfig
board/freescale/mpc8536ds/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +MPC8536DS BOARD +M: - +S: Maintained +F: board/freescale/mpc8536ds/ +F: include/configs/MPC8536DS.h +F: configs/MPC8536DS_defconfig +F: configs/MPC8536DS_36BIT_defconfig +F: configs/MPC8536DS_SDCARD_defconfig +F: configs/MPC8536DS_SPIFLASH_defconfig
board/freescale/mpc8540ads/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8540ADS BOARD +M: Kumar Gala <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/mpc8540ads/ +F: include/configs/MPC8540ADS.h +F: configs/MPC8540ADS_defconfig
board/freescale/mpc8541cds/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC8541CDS BOARD +M: Kumar Gala <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/mpc8541cds/ +F: include/configs/MPC8541CDS.h +F: configs/MPC8541CDS_defconfig +F: configs/MPC8541CDS_legacy_defconfig
board/freescale/mpc8544ds/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8544DS BOARD +M: - +S: Maintained +F: board/freescale/mpc8544ds/ +F: include/configs/MPC8544DS.h +F: configs/MPC8544DS_defconfig
board/freescale/mpc8548cds/MAINTAINERS new file +8 -0
@@ -0,0 +1,8 @@ +MPC8548CDS BOARD +M: - +S: Maintained +F: board/freescale/mpc8548cds/ +F: include/configs/MPC8548CDS.h +F: configs/MPC8548CDS_defconfig +F: configs/MPC8548CDS_36BIT_defconfig +F: configs/MPC8548CDS_legacy_defconfig
board/freescale/mpc8555cds/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC8555CDS BOARD +M: Kumar Gala <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/mpc8555cds/ +F: include/configs/MPC8555CDS.h +F: configs/MPC8555CDS_defconfig +F: configs/MPC8555CDS_legacy_defconfig
board/freescale/mpc8560ads/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8560ADS BOARD +M: Kumar Gala <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/mpc8560ads/ +F: include/configs/MPC8560ADS.h +F: configs/MPC8560ADS_defconfig
board/freescale/mpc8568mds/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8568MDS BOARD +M: - +S: Maintained +F: board/freescale/mpc8568mds/ +F: include/configs/MPC8568MDS.h +F: configs/MPC8568MDS_defconfig
board/freescale/mpc8569mds/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC8569MDS BOARD +M: - +S: Maintained +F: board/freescale/mpc8569mds/ +F: include/configs/MPC8569MDS.h +F: configs/MPC8569MDS_defconfig +F: configs/MPC8569MDS_ATM_defconfig
board/freescale/mpc8572ds/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC8572DS BOARD +M: York Sun <[email protected]> +S: Maintained +F: board/freescale/mpc8572ds/ +F: include/configs/MPC8572DS.h +F: configs/MPC8572DS_defconfig +F: configs/MPC8572DS_36BIT_defconfig
board/freescale/mpc8610hpcd/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8610HPCD BOARD +M: - +S: Maintained +F: board/freescale/mpc8610hpcd/ +F: include/configs/MPC8610HPCD.h +F: configs/MPC8610HPCD_defconfig
board/freescale/mpc8641hpcn/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MPC8641HPCN BOARD +M: Kumar Gala <[email protected]> +S: Orphan (since 2014-06) +F: board/freescale/mpc8641hpcn/ +F: include/configs/MPC8641HPCN.h +F: configs/MPC8641HPCN_defconfig +F: configs/MPC8641HPCN_36BIT_defconfig
board/freescale/mx23evk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX23EVK BOARD +M: Otavio Salvador <[email protected]> +S: Maintained +F: board/freescale/mx23evk/ +F: include/configs/mx23evk.h +F: configs/mx23evk_defconfig
board/freescale/mx25pdk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX25PDK BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx25pdk/ +F: include/configs/mx25pdk.h +F: configs/mx25pdk_defconfig
board/freescale/mx28evk/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +MX28EVK BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx28evk/ +F: include/configs/mx28evk.h +F: configs/mx28evk_defconfig +F: configs/mx28evk_auart_console_defconfig +F: configs/mx28evk_nand_defconfig +F: configs/mx28evk_spi_defconfig
board/freescale/mx31ads/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX31ADS BOARD +M: (resigned) Guennadi Liakhovetski <[email protected]> +S: Orphan (since 2013-09) +F: board/freescale/mx31ads/ +F: include/configs/mx31ads.h +F: configs/mx31ads_defconfig
board/freescale/mx31pdk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX31PDK BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx31pdk/ +F: include/configs/mx31pdk.h +F: configs/mx31pdk_defconfig
board/freescale/mx35pdk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX35PDK BOARD +M: Stefano Babic <[email protected]> +S: Maintained +F: board/freescale/mx35pdk/ +F: include/configs/mx35pdk.h +F: configs/mx35pdk_defconfig
board/freescale/mx51evk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX51EVK BOARD +M: Stefano Babic <[email protected]> +S: Maintained +F: board/freescale/mx51evk/ +F: include/configs/mx51evk.h +F: configs/mx51evk_defconfig
board/freescale/mx53ard/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX53ARD BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx53ard/ +F: include/configs/mx53ard.h +F: configs/mx53ard_defconfig
board/freescale/mx53evk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX53EVK BOARD +M: Jason Liu <[email protected]> +S: Maintained +F: board/freescale/mx53evk/ +F: include/configs/mx53evk.h +F: configs/mx53evk_defconfig
board/freescale/mx53loco/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX53LOCO BOARD +M: Jason Liu <[email protected]> +S: Maintained +F: board/freescale/mx53loco/ +F: include/configs/mx53loco.h +F: configs/mx53loco_defconfig
board/freescale/mx53smd/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX53SMD BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx53smd/ +F: include/configs/mx53smd.h +F: configs/mx53smd_defconfig
board/freescale/mx6qarm2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX6QARM2 BOARD +M: Jason Liu <[email protected]> +S: Maintained +F: board/freescale/mx6qarm2/ +F: include/configs/mx6qarm2.h +F: configs/mx6qarm2_defconfig
board/freescale/mx6qsabreauto/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MX6QSABREAUTO BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx6qsabreauto/ +F: include/configs/mx6qsabreauto.h +F: configs/mx6dlsabreauto_defconfig +F: configs/mx6qsabreauto_defconfig
board/freescale/mx6sabresd/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MX6SABRESD BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx6sabresd/ +F: include/configs/mx6sabresd.h +F: configs/mx6dlsabresd_defconfig +F: configs/mx6qsabresd_defconfig
board/freescale/mx6slevk/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX6SLEVK BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/freescale/mx6slevk/ +F: include/configs/mx6slevk.h +F: configs/mx6slevk_defconfig
board/freescale/p1010rdb/MAINTAINERS new file +33 -0
@@ -0,0 +1,33 @@ +P1010RDB BOARD +M: - +S: Maintained +F: board/freescale/p1010rdb/ +F: include/configs/P1010RDB.h +F: configs/P1010RDB-PA_36BIT_NAND_defconfig +F: configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig +F: configs/P1010RDB-PA_36BIT_NOR_defconfig +F: configs/P1010RDB-PA_36BIT_NOR_SECBOOT_defconfig +F: configs/P1010RDB-PA_36BIT_SDCARD_defconfig +F: configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig +F: configs/P1010RDB-PA_36BIT_SPIFLASH_SECBOOT_defconfig +F: configs/P1010RDB-PA_NAND_defconfig +F: configs/P1010RDB-PA_NAND_SECBOOT_defconfig +F: configs/P1010RDB-PA_NOR_defconfig +F: configs/P1010RDB-PA_NOR_SECBOOT_defconfig +F: configs/P1010RDB-PA_SDCARD_defconfig +F: configs/P1010RDB-PA_SPIFLASH_defconfig +F: configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig +F: configs/P1010RDB-PB_36BIT_NAND_defconfig +F: configs/P1010RDB-PB_36BIT_NAND_SECBOOT_defconfig +F: configs/P1010RDB-PB_36BIT_NOR_defconfig +F: configs/P1010RDB-PB_36BIT_NOR_SECBOOT_defconfig +F: configs/P1010RDB-PB_36BIT_SDCARD_defconfig +F: configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig +F: configs/P1010RDB-PB_36BIT_SPIFLASH_SECBOOT_defconfig +F: configs/P1010RDB-PB_NAND_defconfig +F: configs/P1010RDB-PB_NAND_SECBOOT_defconfig +F: configs/P1010RDB-PB_NOR_defconfig +F: configs/P1010RDB-PB_NOR_SECBOOT_defconfig +F: configs/P1010RDB-PB_SDCARD_defconfig +F: configs/P1010RDB-PB_SPIFLASH_defconfig +F: configs/P1010RDB-PB_SPIFLASH_SECBOOT_defconfig
board/freescale/p1022ds/MAINTAINERS new file +13 -0
@@ -0,0 +1,13 @@ +P1022DS BOARD +M: Timur Tabi <[email protected]> +S: Maintained +F: board/freescale/p1022ds/ +F: include/configs/P1022DS.h +F: configs/P1022DS_defconfig +F: configs/P1022DS_36BIT_defconfig +F: configs/P1022DS_36BIT_NAND_defconfig +F: configs/P1022DS_36BIT_SDCARD_defconfig +F: configs/P1022DS_36BIT_SPIFLASH_defconfig +F: configs/P1022DS_NAND_defconfig +F: configs/P1022DS_SDCARD_defconfig +F: configs/P1022DS_SPIFLASH_defconfig
board/freescale/p1023rdb/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +P1023RDB BOARD +M: - +S: Maintained +F: board/freescale/p1023rdb/ +F: include/configs/P1023RDB.h +F: configs/P1023RDB_defconfig
board/freescale/p1_p2_rdb/MAINTAINERS new file +37 -0
@@ -0,0 +1,37 @@ +P1_P2_RDB BOARD +M: - +S: Maintained +F: board/freescale/p1_p2_rdb/ +F: include/configs/P1_P2_RDB.h +F: configs/P1011RDB_defconfig +F: configs/P1011RDB_36BIT_defconfig +F: configs/P1011RDB_36BIT_SDCARD_defconfig +F: configs/P1011RDB_36BIT_SPIFLASH_defconfig +F: configs/P1011RDB_NAND_defconfig +F: configs/P1011RDB_SDCARD_defconfig +F: configs/P1011RDB_SPIFLASH_defconfig +F: configs/P1020RDB_defconfig +F: configs/P1020RDB_36BIT_defconfig +F: configs/P1020RDB_36BIT_SDCARD_defconfig +F: configs/P1020RDB_36BIT_SPIFLASH_defconfig +F: configs/P1020RDB_NAND_defconfig +F: configs/P1020RDB_SDCARD_defconfig +F: configs/P1020RDB_SPIFLASH_defconfig +F: configs/P2010RDB_defconfig +F: configs/P2010RDB_36BIT_defconfig +F: configs/P2010RDB_36BIT_SDCARD_defconfig +F: configs/P2010RDB_36BIT_SPIFLASH_defconfig +F: configs/P2010RDB_NAND_defconfig +F: configs/P2010RDB_SDCARD_defconfig +F: configs/P2010RDB_SPIFLASH_defconfig +F: configs/P2020RDB_36BIT_defconfig +F: configs/P2020RDB_36BIT_SDCARD_defconfig +F: configs/P2020RDB_36BIT_SPIFLASH_defconfig +F: configs/P2020RDB_NAND_defconfig +F: configs/P2020RDB_SDCARD_defconfig +F: configs/P2020RDB_SPIFLASH_defconfig + +P2020RDB BOARD +M: Poonam Aggrwal <[email protected]> +S: Maintained +F: configs/P2020RDB_defconfig
board/freescale/p1_p2_rdb_pc/MAINTAINERS new file +51 -0
51 lines not on this page · raw message
board/freescale/p1_twr/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +P1_TWR BOARD +M: - +S: Maintained +F: board/freescale/p1_twr/ +F: include/configs/p1_twr.h +F: configs/TWR-P1025_defconfig
board/freescale/p2020come/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +P2020COME BOARD +M: Ira W. Snyder <[email protected]> +S: Maintained +F: board/freescale/p2020come/ +F: include/configs/P2020COME.h +F: configs/P2020COME_SDCARD_defconfig +F: configs/P2020COME_SPIFLASH_defconfig
board/freescale/p2020ds/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +P2020DS BOARD +M: - +S: Maintained +F: board/freescale/p2020ds/ +F: include/configs/P2020DS.h +F: configs/P2020DS_defconfig +F: configs/P2020DS_36BIT_defconfig +F: configs/P2020DS_DDR2_defconfig +F: configs/P2020DS_SDCARD_defconfig +F: configs/P2020DS_SPIFLASH_defconfig
board/freescale/p2041rdb/MAINTAINERS new file +11 -0
@@ -0,0 +1,11 @@ +P2041RDB BOARD +M: - +S: Maintained +F: board/freescale/p2041rdb/ +F: include/configs/P2041RDB.h +F: configs/P2041RDB_defconfig +F: configs/P2041RDB_NAND_defconfig +F: configs/P2041RDB_SDCARD_defconfig +F: configs/P2041RDB_SECURE_BOOT_defconfig +F: configs/P2041RDB_SPIFLASH_defconfig +F: configs/P2041RDB_SRIO_PCIE_BOOT_defconfig
board/freescale/qemu-ppce500/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +QEMU-PPCE500 BOARD +M: Alexander Graf <[email protected]> +S: Maintained +F: board/freescale/qemu-ppce500/ +F: include/configs/qemu-ppce500.h +F: configs/qemu-ppce500_defconfig
board/freescale/t1040qds/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +T1040QDS BOARD +M: Poonam Aggrwal <[email protected]> +S: Maintained +F: board/freescale/t1040qds/ +F: include/configs/T1040QDS.h +F: configs/T1040QDS_defconfig +F: configs/T1040QDS_D4_defconfig + +T1040QDS_SECURE_BOOT BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/T1040QDS_SECURE_BOOT_defconfig
board/freescale/t104xrdb/MAINTAINERS new file +22 -0
@@ -0,0 +1,22 @@ +T104XRDB BOARD +M: Priyanka Jain <[email protected]> +S: Maintained +F: board/freescale/t104xrdb/ +F: include/configs/T104xRDB.h +F: configs/T1040RDB_defconfig +F: configs/T1040RDB_NAND_defconfig +F: configs/T1040RDB_SPIFLASH_defconfig +F: configs/T1042RDB_PI_defconfig +F: configs/T1042RDB_PI_NAND_defconfig +F: configs/T1042RDB_PI_SPIFLASH_defconfig + +T1040RDB_SDCARD BOARD +M: - +S: Maintained +F: configs/T1040RDB_SDCARD_defconfig +F: configs/T1042RDB_PI_SDCARD_defconfig + +T1040RDB_SECURE_BOOT BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/T1040RDB_SECURE_BOOT_defconfig
board/freescale/t208xqds/MAINTAINERS new file +20 -0
@@ -0,0 +1,20 @@ +T208XQDS BOARD +M: - +S: Maintained +F: board/freescale/t208xqds/ +F: include/configs/T208xQDS.h +F: configs/T2080QDS_defconfig +F: configs/T2080QDS_NAND_defconfig +F: configs/T2080QDS_SDCARD_defconfig +F: configs/T2080QDS_SPIFLASH_defconfig +F: configs/T2080QDS_SRIO_PCIE_BOOT_defconfig +F: configs/T2081QDS_defconfig +F: configs/T2081QDS_NAND_defconfig +F: configs/T2081QDS_SDCARD_defconfig +F: configs/T2081QDS_SPIFLASH_defconfig +F: configs/T2081QDS_SRIO_PCIE_BOOT_defconfig + +T2080QDS_SECURE_BOOT BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/T2080QDS_SECURE_BOOT_defconfig
board/freescale/t208xrdb/MAINTAINERS new file +15 -0
@@ -0,0 +1,15 @@ +T208XRDB BOARD +M: - +S: Maintained +F: board/freescale/t208xrdb/ +F: include/configs/T208xRDB.h +F: configs/T2080RDB_defconfig +F: configs/T2080RDB_NAND_defconfig +F: configs/T2080RDB_SDCARD_defconfig +F: configs/T2080RDB_SPIFLASH_defconfig +F: configs/T2080RDB_SRIO_PCIE_BOOT_defconfig + +T2080RDB_SECURE_BOOT BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/T2080RDB_SECURE_BOOT_defconfig
board/freescale/t4qds/MAINTAINERS new file +26 -0
@@ -0,0 +1,26 @@ +T4QDS BOARD +M: - +S: Maintained +F: board/freescale/t4qds/ +F: include/configs/T4240QDS.h +F: configs/T4160QDS_defconfig +F: configs/T4160QDS_NAND_defconfig +F: configs/T4160QDS_SDCARD_defconfig +F: configs/T4160QDS_SPIFLASH_defconfig +F: configs/T4240QDS_defconfig +F: configs/T4240QDS_NAND_defconfig +F: configs/T4240QDS_SDCARD_defconfig +F: configs/T4240QDS_SPIFLASH_defconfig +F: configs/T4240QDS_SRIO_PCIE_BOOT_defconfig + +T4160QDS_SECURE_BOOT BOARD +M: Aneesh Bansal <[email protected]> +S: Maintained +F: configs/T4160QDS_SECURE_BOOT_defconfig +F: configs/T4240QDS_SECURE_BOOT_defconfig + +T4240EMU BOARD +M: York Sun <[email protected]> +S: Maintained +F: include/configs/T4240EMU.h +F: configs/T4240EMU_defconfig
board/freescale/t4rdb/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +T4RDB BOARD +M: Chunhe Lan <[email protected]> +S: Maintained +F: board/freescale/t4rdb/ +F: include/configs/T4240RDB.h +F: configs/T4160RDB_defconfig +F: configs/T4240RDB_defconfig
board/freescale/vf610twr/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +VF610TWR BOARD +M: Alison Wang <[email protected]> +S: Maintained +F: board/freescale/vf610twr/ +F: include/configs/vf610twr.h +F: configs/vf610twr_defconfig
board/funkwerk/vovpn-gw/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +VOVPN-GW BOARD +M: - +S: Maintained +F: board/funkwerk/vovpn-gw/ +F: include/configs/VoVPN-GW.h +F: configs/VoVPN-GW_66MHz_defconfig
board/g2000/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +G2000 BOARD +M: Matthias Fuchs <[email protected]> +S: Maintained +F: board/g2000/ +F: include/configs/G2000.h +F: configs/G2000_defconfig
board/gaisler/gr_cpci_ax2000/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GR_CPCI_AX2000 BOARD +M: - +S: Maintained +F: board/gaisler/gr_cpci_ax2000/ +F: include/configs/gr_cpci_ax2000.h +F: configs/gr_cpci_ax2000_defconfig
board/gaisler/gr_ep2s60/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GR_EP2S60 BOARD +M: - +S: Maintained +F: board/gaisler/gr_ep2s60/ +F: include/configs/gr_ep2s60.h +F: configs/gr_ep2s60_defconfig
board/gaisler/gr_xc3s_1500/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GR_XC3S_1500 BOARD +M: - +S: Maintained +F: board/gaisler/gr_xc3s_1500/ +F: include/configs/gr_xc3s_1500.h +F: configs/gr_xc3s_1500_defconfig
board/gaisler/grsim/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GRSIM BOARD +M: - +S: Maintained +F: board/gaisler/grsim/ +F: include/configs/grsim.h +F: configs/grsim_defconfig
board/gaisler/grsim_leon2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GRSIM_LEON2 BOARD +M: - +S: Maintained +F: board/gaisler/grsim_leon2/ +F: include/configs/grsim_leon2.h +F: configs/grsim_leon2_defconfig
board/galaxy5200/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +GALAXY5200 BOARD +M: Eric Millbrandt <[email protected]> +S: Orphan (since 2014-06) +F: board/galaxy5200/ +F: include/configs/galaxy5200.h +F: configs/galaxy5200_defconfig +F: configs/galaxy5200_LOWBOOT_defconfig
board/gateworks/gw_ventana/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GW_VENTANA BOARD +M: Tim Harvey <[email protected]> +S: Maintained +F: board/gateworks/gw_ventana/ +F: include/configs/gw_ventana.h +F: configs/gwventana_defconfig
board/gdsys/405ep/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +405EP BOARD +M: Dirk Eibach <[email protected]> +S: Maintained +F: board/gdsys/405ep/ +F: include/configs/dlvision-10g.h +F: configs/dlvision-10g_defconfig +F: include/configs/io.h +F: configs/io_defconfig +F: include/configs/iocon.h +F: configs/iocon_defconfig +F: include/configs/neo.h +F: configs/neo_defconfig
board/gdsys/405ex/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +405EX BOARD +M: Dirk Eibach <[email protected]> +S: Maintained +F: board/gdsys/405ex/ +F: include/configs/io64.h +F: configs/io64_defconfig
board/gdsys/dlvision/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DLVISION BOARD +M: Dirk Eibach <[email protected]> +S: Maintained +F: board/gdsys/dlvision/ +F: include/configs/dlvision.h +F: configs/dlvision_defconfig
board/gdsys/gdppc440etx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GDPPC440ETX BOARD +M: Dirk Eibach <[email protected]> +S: Maintained +F: board/gdsys/gdppc440etx/ +F: include/configs/gdppc440etx.h +F: configs/gdppc440etx_defconfig
board/gdsys/intip/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +INTIP BOARD +M: Dirk Eibach <[email protected]> +S: Maintained +F: board/gdsys/intip/ +F: include/configs/intip.h +F: configs/devconcenter_defconfig +F: configs/intip_defconfig
board/gdsys/p1022/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +P1022 BOARD +M: Dirk Eibach <[email protected]> +S: Maintained +F: board/gdsys/p1022/ +F: include/configs/controlcenterd.h +F: configs/controlcenterd_36BIT_SDCARD_defconfig +F: configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig +F: configs/controlcenterd_TRAILBLAZER_defconfig +F: configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig
board/gen860t/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +GEN860T BOARD +M: Keith Outwater <[email protected]> +S: Orphan (since 2014-06) +F: board/gen860t/ +F: include/configs/GEN860T.h +F: configs/GEN860T_defconfig +F: configs/GEN860T_SC_defconfig
board/genesi/mx51_efikamx/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MX51_EFIKAMX BOARD +M: - +S: Maintained +F: board/genesi/mx51_efikamx/ +F: include/configs/mx51_efikamx.h +F: configs/mx51_efikamx_defconfig +F: configs/mx51_efikasb_defconfig
board/gumstix/duovero/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +DUOVERO BOARD +M: Ash Charles <[email protected]> +S: Maintained +F: board/gumstix/duovero/ +F: include/configs/duovero.h +F: configs/duovero_defconfig
board/gumstix/pepper/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PEPPER BOARD +M: Ash Charles <[email protected]> +S: Maintained +F: board/gumstix/pepper/ +F: include/configs/pepper.h +F: configs/pepper_defconfig
board/gw8260/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GW8260 BOARD +M: Oliver Brown <[email protected]> +S: Maintained +F: board/gw8260/ +F: include/configs/gw8260.h +F: configs/gw8260_defconfig
board/h2200/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +H2200 BOARD +M: Lukasz Dalek <[email protected]> +S: Maintained +F: board/h2200/ +F: include/configs/h2200.h +F: configs/h2200_defconfig
board/hale/tt01/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TT01 BOARD +M: Helmut Raiger <[email protected]> +S: Maintained +F: board/hale/tt01/ +F: include/configs/tt01.h +F: configs/tt01_defconfig
board/hermes/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HERMES BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/hermes/ +F: include/configs/hermes.h +F: configs/hermes_defconfig
board/highbank/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HIGHBANK BOARD +M: Rob Herring <[email protected]> +S: Maintained +F: board/highbank/ +F: include/configs/highbank.h +F: configs/highbank_defconfig
board/htkw/mcx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MCX BOARD +M: Ilya Yanok <[email protected]> +S: Maintained +F: board/htkw/mcx/ +F: include/configs/mcx.h +F: configs/mcx_defconfig
board/hymod/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HYMOD BOARD +M: Murray Jensen <[email protected]> +S: Maintained +F: board/hymod/ +F: include/configs/hymod.h +F: configs/hymod_defconfig
board/ibf-dsp561/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IBF-DSP561 BOARD +M: I-SYST Micromodule <[email protected]> +S: Maintained +F: board/ibf-dsp561/ +F: include/configs/ibf-dsp561.h +F: configs/ibf-dsp561_defconfig
board/icecube/MAINTAINERS new file +21 -0
@@ -0,0 +1,21 @@ +ICECUBE BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/icecube/ +F: include/configs/IceCube.h +F: configs/icecube_5200_defconfig + +ICECUBE_5200_DDR BOARD +M: - +S: Maintained +F: configs/icecube_5200_DDR_defconfig +F: configs/icecube_5200_DDR_LOWBOOT_defconfig +F: configs/icecube_5200_DDR_LOWBOOT08_defconfig +F: configs/icecube_5200_LOWBOOT_defconfig +F: configs/icecube_5200_LOWBOOT08_defconfig +F: configs/Lite5200_defconfig +F: configs/Lite5200_LOWBOOT_defconfig +F: configs/Lite5200_LOWBOOT08_defconfig +F: configs/lite5200b_defconfig +F: configs/lite5200b_LOWBOOT_defconfig +F: configs/lite5200b_PM_defconfig
board/icpdas/lp8x4x/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +LP8X4X BOARD +M: Sergey Yanovich <[email protected]> +S: Maintained +F: board/icpdas/lp8x4x/ +F: include/configs/lp8x4x.h +F: configs/lp8x4x_defconfig
board/icu862/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +ICU862 BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/icu862/ +F: include/configs/ICU862.h +F: configs/ICU862_defconfig +F: configs/ICU862_100MHz_defconfig
board/ids/ids8247/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IDS8247 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/ids/ids8247/ +F: include/configs/IDS8247.h +F: configs/IDS8247_defconfig
board/ids/ids8313/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IDS8313 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/ids/ids8313/ +F: include/configs/ids8313.h +F: configs/ids8313_defconfig
board/ifm/ac14xx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +AC14XX BOARD +M: Anatolij Gustschin <[email protected]> +S: Maintained +F: board/ifm/ac14xx/ +F: include/configs/ac14xx.h +F: configs/ac14xx_defconfig
board/ifm/o2dnt2/MAINTAINERS new file +20 -0
@@ -0,0 +1,20 @@ +O2DNT2 BOARD +M: Anatolij Gustschin <[email protected]> +S: Maintained +F: board/ifm/o2dnt2/ +F: include/configs/o2d.h +F: configs/O2D_defconfig +F: include/configs/o2d300.h +F: configs/O2D300_defconfig +F: include/configs/o2dnt2.h +F: configs/O2DNT2_defconfig +F: configs/O2DNT2_RAMBOOT_defconfig +F: include/configs/o2i.h +F: configs/O2I_defconfig +F: include/configs/o2mnt.h +F: configs/O2MNT_defconfig +F: configs/O2MNT_O2M110_defconfig +F: configs/O2MNT_O2M112_defconfig +F: configs/O2MNT_O2M113_defconfig +F: include/configs/o3dnt.h +F: configs/O3DNT_defconfig
board/imgtec/malta/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MALTA BOARD +M: Paul Burton <[email protected]> +S: Maintained +F: board/imgtec/malta/ +F: include/configs/malta.h +F: configs/malta_defconfig +F: configs/maltael_defconfig
board/imx31_phycore/MAINTAINERS new file +11 -0
@@ -0,0 +1,11 @@ +IMX31_PHYCORE BOARD +M: - +S: Maintained +F: board/imx31_phycore/ +F: include/configs/imx31_phycore.h +F: configs/imx31_phycore_defconfig + +IMX31_PHYCORE_EET BOARD +M: (resigned) Guennadi Liakhovetski <[email protected]> +S: Orphan (since 2013-09) +F: configs/imx31_phycore_eet_defconfig
board/in-circuit/grasshopper/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +GRASSHOPPER BOARD +M: Andreas Bie?mann <[email protected]> +S: Maintained +F: board/in-circuit/grasshopper/ +F: include/configs/grasshopper.h +F: configs/grasshopper_defconfig
board/inka4x0/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +INKA4X0 BOARD +M: Detlev Zundel <[email protected]> +S: Maintained +F: board/inka4x0/ +F: include/configs/inka4x0.h +F: configs/inka4x0_defconfig
board/intercontrol/digsy_mtc/MAINTAINERS new file +9 -0
@@ -0,0 +1,9 @@ +DIGSY_MTC BOARD +M: Werner Pfister <[email protected]> +S: Maintained +F: board/intercontrol/digsy_mtc/ +F: include/configs/digsy_mtc.h +F: configs/digsy_mtc_defconfig +F: configs/digsy_mtc_RAMBOOT_defconfig +F: configs/digsy_mtc_rev5_defconfig +F: configs/digsy_mtc_rev5_RAMBOOT_defconfig
board/iomega/iconnect/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ICONNECT BOARD +M: Luka Perkov <[email protected]> +S: Maintained +F: board/iomega/iconnect/ +F: include/configs/iconnect.h +F: configs/iconnect_defconfig
board/ip04/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IP04 BOARD +M: Brent Kandetzki <[email protected]> +S: Orphan (since 2014-06) +F: board/ip04/ +F: include/configs/ip04.h +F: configs/ip04_defconfig
board/ip860/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IP860 BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/ip860/ +F: include/configs/IP860.h +F: configs/IP860_defconfig
board/ipek01/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IPEK01 BOARD +M: Wolfgang Grandegger <[email protected]> +S: Maintained +F: board/ipek01/ +F: include/configs/ipek01.h +F: configs/ipek01_defconfig
board/iphase4539/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IPHASE4539 BOARD +M: Wolfgang Grandegger <[email protected]> +S: Maintained +F: board/iphase4539/ +F: include/configs/IPHASE4539.h +F: configs/IPHASE4539_defconfig
board/isee/igep0033/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IGEP0033 BOARD +M: Enric Balletbo i Serra <[email protected]> +S: Maintained +F: board/isee/igep0033/ +F: include/configs/am335x_igep0033.h +F: configs/am335x_igep0033_defconfig
board/isee/igep00x0/MAINTAINERS new file +14 -0
@@ -0,0 +1,14 @@ +IGEP00X0 BOARD +M: Enric Balletbo i Serra <[email protected]> +S: Maintained +F: board/isee/igep00x0/ +F: include/configs/omap3_igep00x0.h +F: configs/igep0020_defconfig +F: configs/igep0030_defconfig +F: configs/igep0032_defconfig + +IGEP0020_NAND BOARD +M: - +S: Maintained +F: configs/igep0020_nand_defconfig +F: configs/igep0030_nand_defconfig
board/ivm/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +IVM BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/ivm/ +F: include/configs/IVML24.h +F: configs/IVML24_defconfig +F: configs/IVML24_128_defconfig +F: configs/IVML24_256_defconfig +F: include/configs/IVMS8.h +F: configs/IVMS8_defconfig +F: configs/IVMS8_128_defconfig +F: configs/IVMS8_256_defconfig
board/jornada/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +JORNADA BOARD +M: Kristoffer Ericson <[email protected]> +S: Maintained +F: board/jornada/ +F: include/configs/jornada.h +F: configs/jornada_defconfig
board/jse/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +JSE BOARD +M: Stephen Williams <[email protected]> +S: Maintained +F: board/jse/ +F: include/configs/JSE.h +F: configs/JSE_defconfig
board/jupiter/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +JUPITER BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/jupiter/ +F: include/configs/jupiter.h +F: configs/jupiter_defconfig
board/karo/tk71/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TK71 BOARD +M: - +S: Maintained +F: board/karo/tk71/ +F: include/configs/tk71.h +F: configs/tk71_defconfig
board/karo/tx25/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +TX25 BOARD +M: John Rigby <[email protected]> +S: Maintained +F: board/karo/tx25/ +F: include/configs/tx25.h +F: configs/tx25_defconfig
board/keymile/km82xx/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +KM82XX BOARD +M: Holger Brunck <[email protected]> +S: Maintained +F: board/keymile/km82xx/ +F: include/configs/km82xx.h +F: configs/mgcoge_defconfig +F: configs/mgcoge3ne_defconfig
board/keymile/km83xx/MAINTAINERS new file +19 -0
@@ -0,0 +1,19 @@ +KM83XX BOARD +M: Holger Brunck <[email protected]> +S: Maintained +F: board/keymile/km83xx/ +F: include/configs/km8360.h +F: configs/kmcoge5ne_defconfig +F: configs/kmeter1_defconfig +F: include/configs/tuxx1.h +F: configs/kmopti2_defconfig +F: include/configs/suvd3.h +F: configs/kmvect1_defconfig +F: configs/suvd3_defconfig +F: configs/tuge1_defconfig +F: configs/tuxx1_defconfig + +KMSUPX5 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: configs/kmsupx5_defconfig
board/keymile/km_arm/MAINTAINERS new file +14 -0
@@ -0,0 +1,14 @@ +KM_ARM BOARD +M: Valentin Longchamp <[email protected]> +S: Maintained +F: board/keymile/km_arm/ +F: include/configs/km_kirkwood.h +F: configs/km_kirkwood_defconfig +F: configs/km_kirkwood_128m16_defconfig +F: configs/km_kirkwood_pci_defconfig +F: configs/kmcoge5un_defconfig +F: configs/kmnusa_defconfig +F: configs/kmsugp1_defconfig +F: configs/kmsuv31_defconfig +F: configs/mgcoge3un_defconfig +F: configs/portl2_defconfig
board/keymile/kmp204x/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +KMP204X BOARD +M: Valentin Longchamp <[email protected]> +S: Maintained +F: board/keymile/kmp204x/ +F: include/configs/kmp204x.h +F: configs/kmcoge4_defconfig +F: configs/kmlion1_defconfig
board/kmc/kzm9g/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +KZM9G BOARD +M: Nobuhiro Iwamatsu <[email protected]> +M: Tetsuyuki Kobayashi <[email protected]> +S: Maintained +F: board/kmc/kzm9g/ +F: include/configs/kzm9g.h +F: configs/kzm9g_defconfig
board/korat/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +KORAT BOARD +M: Larry Johnson <[email protected]> +S: Maintained +F: board/korat/ +F: include/configs/korat.h +F: configs/korat_defconfig +F: configs/korat_perm_defconfig
board/kup/kup4k/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +KUP4K BOARD +M: Klaus Heydeck <[email protected]> +S: Maintained +F: board/kup/kup4k/ +F: include/configs/KUP4K.h +F: configs/KUP4K_defconfig
board/kup/kup4x/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +KUP4X BOARD +M: Klaus Heydeck <[email protected]> +S: Maintained +F: board/kup/kup4x/ +F: include/configs/KUP4X.h +F: configs/KUP4X_defconfig
board/logicpd/am3517evm/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +AM3517EVM BOARD +M: Vaibhav Hiremath <[email protected]> +S: Maintained +F: board/logicpd/am3517evm/ +F: include/configs/am3517_evm.h +F: configs/am3517_evm_defconfig
board/logicpd/imx27lite/MAINTAINERS new file +12 -0
@@ -0,0 +1,12 @@ +IMX27LITE BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/logicpd/imx27lite/ +F: include/configs/imx27lite.h +F: configs/imx27lite_defconfig + +MAGNESIUM BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: include/configs/magnesium.h +F: configs/magnesium_defconfig
board/logicpd/imx31_litekit/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +IMX31_LITEKIT BOARD +M: - +S: Maintained +F: board/logicpd/imx31_litekit/ +F: include/configs/imx31_litekit.h +F: configs/imx31_litekit_defconfig
board/logicpd/omap3som/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +OMAP3SOM BOARD +M: Peter Barada <[email protected]> +S: Maintained +F: board/logicpd/omap3som/ +F: include/configs/omap3_logic.h +F: configs/omap3_logic_defconfig
board/logicpd/zoom1/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ZOOM1 BOARD +M: Nishanth Menon <[email protected]> +S: Maintained +F: board/logicpd/zoom1/ +F: include/configs/omap3_zoom1.h +F: configs/omap3_zoom1_defconfig
board/lwmon/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +LWMON BOARD +M: Wolfgang Denk <[email protected]> +S: Maintained +F: board/lwmon/ +F: include/configs/lwmon.h +F: configs/lwmon_defconfig
board/lwmon5/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +LWMON5 BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/lwmon5/ +F: include/configs/lwmon5.h +F: configs/lcd4_lwmon5_defconfig +F: configs/lwmon5_defconfig
board/manroland/hmi1001/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HMI1001 BOARD +M: - +S: Maintained +F: board/manroland/hmi1001/ +F: include/configs/hmi1001.h +F: configs/hmi1001_defconfig
board/manroland/mucmc52/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MUCMC52 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/manroland/mucmc52/ +F: include/configs/mucmc52.h +F: configs/mucmc52_defconfig
board/manroland/uc100/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +UC100 BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/manroland/uc100/ +F: include/configs/uc100.h +F: configs/uc100_defconfig
board/manroland/uc101/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +UC101 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/manroland/uc101/ +F: include/configs/uc101.h +F: configs/uc101_defconfig
board/matrix_vision/mergerbox/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MERGERBOX BOARD +M: Andre Schwarz <[email protected]> +S: Orphan (since 2014-03) +F: board/matrix_vision/mergerbox/ +F: include/configs/MERGERBOX.h +F: configs/MERGERBOX_defconfig
board/matrix_vision/mvbc_p/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MVBC_P BOARD +M: Andre Schwarz <[email protected]> +S: Orphan (since 2014-03) +F: board/matrix_vision/mvbc_p/ +F: include/configs/MVBC_P.h +F: configs/MVBC_P_defconfig
board/matrix_vision/mvblm7/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MVBLM7 BOARD +M: Andre Schwarz <[email protected]> +S: Orphan (since 2014-03) +F: board/matrix_vision/mvblm7/ +F: include/configs/MVBLM7.h +F: configs/MVBLM7_defconfig
board/matrix_vision/mvblx/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MVBLX BOARD +M: Michael Jones <[email protected]> +S: Maintained +F: board/matrix_vision/mvblx/ +F: include/configs/omap3_mvblx.h +F: configs/omap3_mvblx_defconfig
board/matrix_vision/mvsmr/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MVSMR BOARD +M: Andre Schwarz <[email protected]> +S: Orphan (since 2014-03) +F: board/matrix_vision/mvsmr/ +F: include/configs/MVSMR.h +F: configs/MVSMR_defconfig
board/mcc200/MAINTAINERS new file +17 -0
@@ -0,0 +1,17 @@ +MCC200 BOARD +M: - +S: Maintained +F: board/mcc200/ +F: include/configs/mcc200.h +F: configs/mcc200_defconfig +F: configs/mcc200_COM12_defconfig +F: configs/mcc200_COM12_highboot_defconfig +F: configs/mcc200_COM12_highboot_SDRAM_defconfig +F: configs/mcc200_COM12_SDRAM_defconfig +F: configs/mcc200_highboot_defconfig +F: configs/mcc200_highboot_SDRAM_defconfig +F: configs/mcc200_SDRAM_defconfig +F: configs/prs200_defconfig +F: configs/prs200_DDR_defconfig +F: configs/prs200_highboot_defconfig +F: configs/prs200_highboot_DDR_defconfig
board/micronas/vct/MAINTAINERS new file +17 -0
@@ -0,0 +1,17 @@ +VCT BOARD +M: - +S: Maintained +F: board/micronas/vct/ +F: include/configs/vct.h +F: configs/vct_platinum_defconfig +F: configs/vct_platinum_onenand_defconfig +F: configs/vct_platinum_onenand_small_defconfig +F: configs/vct_platinum_small_defconfig +F: configs/vct_platinumavc_defconfig +F: configs/vct_platinumavc_onenand_defconfig +F: configs/vct_platinumavc_onenand_small_defconfig +F: configs/vct_platinumavc_small_defconfig +F: configs/vct_premium_defconfig +F: configs/vct_premium_onenand_defconfig +F: configs/vct_premium_onenand_small_defconfig +F: configs/vct_premium_small_defconfig
board/mimc/mimc200/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MIMC200 BOARD +M: Mark Jackson <[email protected]> +S: Maintained +F: board/mimc/mimc200/ +F: include/configs/mimc200.h +F: configs/mimc200_defconfig
board/miromico/hammerhead/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +HAMMERHEAD BOARD +M: Alex Raimondi <[email protected]> +S: Maintained +F: board/miromico/hammerhead/ +F: include/configs/hammerhead.h +F: configs/hammerhead_defconfig
board/mosaixtech/icon/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ICON BOARD +M: Stefan Roese <[email protected]> +S: Maintained +F: board/mosaixtech/icon/ +F: include/configs/icon.h +F: configs/icon_defconfig
board/motionpro/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MOTIONPRO BOARD +M: - +S: Maintained +F: board/motionpro/ +F: include/configs/motionpro.h +F: configs/motionpro_defconfig
board/mpc8308_p1m/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPC8308_P1M BOARD +M: Ilya Yanok <[email protected]> +S: Maintained +F: board/mpc8308_p1m/ +F: include/configs/mpc8308_p1m.h +F: configs/mpc8308_p1m_defconfig
board/mpl/mip405/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MIP405 BOARD +M: Denis Peter <[email protected]> +S: Maintained +F: board/mpl/mip405/ +F: include/configs/MIP405.h +F: configs/MIP405_defconfig +F: configs/MIP405T_defconfig
board/mpl/pati/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PATI BOARD +M: - +S: Maintained +F: board/mpl/pati/ +F: include/configs/PATI.h +F: configs/PATI_defconfig
board/mpl/pip405/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +PIP405 BOARD +M: Denis Peter <[email protected]> +S: Maintained +F: board/mpl/pip405/ +F: include/configs/PIP405.h +F: configs/PIP405_defconfig
board/mpl/vcma9/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +VCMA9 BOARD +M: David M?ller <[email protected]> +S: Maintained +F: board/mpl/vcma9/ +F: include/configs/VCMA9.h +F: configs/VCMA9_defconfig
board/mpr2/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MPR2 BOARD +M: Mark Jonas <[email protected]> +S: Maintained +F: board/mpr2/ +F: include/configs/mpr2.h +F: configs/mpr2_defconfig
board/ms7720se/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MS7720SE BOARD +M: Yoshihiro Shimoda <[email protected]> +S: Maintained +F: board/ms7720se/ +F: include/configs/ms7720se.h +F: configs/ms7720se_defconfig
board/ms7722se/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MS7722SE BOARD +M: Nobuhiro Iwamatsu <[email protected]> +M: Nobuhiro Iwamatsu <[email protected]> +S: Maintained +F: board/ms7722se/ +F: include/configs/ms7722se.h +F: configs/ms7722se_defconfig
board/ms7750se/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MS7750SE BOARD +M: Nobuhiro Iwamatsu <[email protected]> +M: Nobuhiro Iwamatsu <[email protected]> +S: Maintained +F: board/ms7750se/ +F: include/configs/ms7750se.h +F: configs/ms7750se_defconfig
board/muas3001/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +MUAS3001 BOARD +M: Heiko Schocher <[email protected]> +S: Maintained +F: board/muas3001/ +F: include/configs/muas3001.h +F: configs/muas3001_defconfig +F: configs/muas3001_dev_defconfig
board/munices/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MUNICES BOARD +M: - +S: Maintained +F: board/munices/ +F: include/configs/munices.h +F: configs/munices_defconfig
board/musenki/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MUSENKI BOARD +M: Jim Thompson <[email protected]> +S: Orphan (since 2014-04) +F: board/musenki/ +F: include/configs/MUSENKI.h +F: configs/MUSENKI_defconfig
board/mvblue/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MVBLUE BOARD +M: - +S: Maintained +F: board/mvblue/ +F: include/configs/MVBLUE.h +F: configs/MVBLUE_defconfig
board/netvia/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +NETVIA BOARD +M: Pantelis Antoniou <[email protected]> +S: Maintained +F: board/netvia/ +F: include/configs/NETVIA.h +F: configs/NETVIA_defconfig +F: configs/NETVIA_V2_defconfig
board/nokia/rx51/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +RX51 BOARD +M: Pali Roh?r <[email protected]> +S: Maintained +F: board/nokia/rx51/ +F: include/configs/nokia_rx51.h +F: configs/nokia_rx51_defconfig
board/nvidia/beaver/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +BEAVER BOARD +M: Tom Warren <[email protected]> +M: Stephen Warren <[email protected]> +S: Maintained
Lines of this file are not shown. View the raw message.
board/nvidia/cardhu/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/nvidia/dalmore/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/nvidia/harmony/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/nvidia/jetson-tk1/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/nvidia/seaboard/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/nvidia/venice2/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/nvidia/ventana/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/nvidia/whistler/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/olimex/mx23_olinuxino/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/omicron/calimain/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/openrisc/openrisc-generic/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/phytec/pcm030/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/phytec/pcm051/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/ppcag/bg0900/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/prodrive/alpr/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/prodrive/p3mx/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/prodrive/p3p440/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/psyent/pci5441/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/psyent/pk1c20/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/raidsonic/ib62x0/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/raspberrypi/rpi_b/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/MigoR/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/ap325rxa/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/ecovec/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/koelsch/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/lager/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/r0p7734/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/r2dplus/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/r7780mp/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/rsk7203/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/rsk7264/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/rsk7269/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/sh7752evb/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/sh7753evb/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/sh7757lcr/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/renesas/sh7763rdp/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/renesas/sh7785lcr/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/ronetix/pm9261/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/ronetix/pm9263/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/ronetix/pm9g45/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/arndale/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/goni/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/origen/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/smdk2410/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/smdk5250/MAINTAINERS new file +12 -0
Lines of this file are not shown. View the raw message.
board/samsung/smdk5420/MAINTAINERS new file +12 -0
Lines of this file are not shown. View the raw message.
board/samsung/smdkc100/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/smdkv310/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/trats/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/trats2/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/samsung/universal_c210/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/sandburst/karef/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/sandburst/metrobox/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/sandisk/sansa_fuze_plus/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/schulercontrol/sc_sps_1/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/siemens/corvus/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/siemens/draco/MAINTAINERS new file +8 -0
Lines of this file are not shown. View the raw message.
board/siemens/pxm2/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/siemens/taurus/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/silica/pengwyn/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/solidrun/hummingboard/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/spear/spear300/MAINTAINERS new file +13 -0
Lines of this file are not shown. View the raw message.
board/spear/spear310/MAINTAINERS new file +15 -0
Lines of this file are not shown. View the raw message.
board/spear/spear320/MAINTAINERS new file +15 -0
Lines of this file are not shown. View the raw message.
board/spear/spear600/MAINTAINERS new file +13 -0
Lines of this file are not shown. View the raw message.
board/st-ericsson/snowball/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/st-ericsson/u8500/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/synopsys/axs101/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/syteco/jadecpu/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/syteco/zmx25/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/taskit/stamp9g20/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/technexion/tao3530/MAINTAINERS new file +11 -0
Lines of this file are not shown. View the raw message.
board/technexion/twister/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/teejet/mt_ventoux/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/ti/am3517crane/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/ti/omap5912osk/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/ti/omap5_uevm/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/ti/tnetv107xevm/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/timll/devkit3250/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/timll/devkit8000/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/toradex/colibri_pxa270/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/toradex/colibri_t20_iris/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/tqc/tqm5200/MAINTAINERS new file +26 -0
Lines of this file are not shown. View the raw message.
board/tqc/tqm8260/MAINTAINERS new file +16 -0
Lines of this file are not shown. View the raw message.
board/tqc/tqm8xx/MAINTAINERS new file +47 -0
47 lines not on this page · raw message
board/ttcontrol/vision2/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xes/xpedite1000/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xes/xpedite517x/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xes/xpedite520x/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xes/xpedite537x/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xes/xpedite550x/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xilinx/microblaze-generic/MAINTAINERS new file +6 -0
Lines of this file are not shown. View the raw message.
board/xilinx/ml507/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/xilinx/ppc405-generic/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/xilinx/ppc440-generic/MAINTAINERS new file +7 -0
Lines of this file are not shown. View the raw message.
board/xilinx/zynq/MAINTAINERS new file +15 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.9.1
Part of the diff is not shown here. View the raw message.
PATCH v8 6/13 Add board MAINTAINERS files
Quoted 11 lines · Masahiro Yamada
We have switched to
Kconfigand the boards.cfg file is going to be removed. We have to retrieve the board status and maintainers information from it.The
MAINTAINERSformat as in Linux Kernel would be nice because we can crib thescripts/get_maintainer.plscript.After some discussion, we chose to put a
MAINTAINERSfile under each board directory, not the top-level one because we want to collect relevant information for a board into a single place.
Quoted 6 lines
TODO:
Modify get_maintainer.pl to scan multipleMAINTAINERSfiles.Signed-off-by Masahiro Yamada <[email protected]>Suggested-by Tom Rini <[email protected]>Acked-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/8f1cef95/attachment.pgp>
PATCH v8 7/13 tools: add genboardscfg.py
In reply to Masahiro YamadaNow the primary data for each board is in Kconfig, defconfig and MAINTAINERS.
It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latest Kconfig, defconfig and MAINTAINERS.
We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
---
Changes in v8: None
Changes in v7:
- Delete the incomplete boards.cfg file when the script is terminated by user with keyboard interrupt.
- Follow PEP8 codiyg style:
Use """blah blah""" rather than '''blah blah''' for docstring. Fix some indents
Add a period of the end of the first line of docstring
- Do not hard-code 'make' command name. Use scripts/show-gnu-make
- Add specific exception class
- Add a blank line to some places for readability
Changes in v6:
- Fix comment format of arguments
foo: blah blah
rather than
foo - blah blah
- Use tag, rest instead of line[:2], line[2:] for clarification
- Sort imports alphabetically
- Insert a blank before each function
- Fix some comments
- Use tempfile.mkdtemp() to create working directories
Changes in v5:
- Support wildcard pattern like 'F: configs/foo_*_defconfig'
- Rename genboardscfg to genboardscfg.py
- Use assert statement for sanity check
- Do not run if imported from another script
if __name__ == '__main__':
main()- Check if we are at the top of source directory
Changes in v4:
- Newly added
Changes in v3: None
Changes in v2: None
tools/genboardscfg.py | 504 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 504 insertions(+) create mode 100755 tools/genboardscfg.py
tools/genboardscfg.py new file +504 -0
@@ -0,0 +1,504 @@ +#!/usr/bin/env python +# +# Author: Masahiro Yamada <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +""" +Converter from Kconfig and MAINTAINERS to boards.cfg + +Run 'tools/genboardscfg.py' to create boards.cfg file. + +Run 'tools/genboardscfg.py -h' for available options. +""" + +import errno +import fnmatch +import glob +import optparse +import os +import re +import shutil +import subprocess +import sys +import tempfile +import time + +BOARD_FILE = 'boards.cfg' +CONFIG_DIR = 'configs' +REFORMAT_CMD = [os.path.join('tools', 'reformat.py'), + '-i', '-d', '-', '-s', '8'] +SHOW_GNU_MAKE = 'scripts/show-gnu-make' +SLEEP_TIME=0.03 + +COMMENT_BLOCK = '''# +# List of boards +# Automatically generated by %s: don't edit +# +# Status, Arch, CPU(:SPLCPU), SoC, Vendor, Board, Target, Options, Maintainers + +''' % __file__ + +### helper functions ### +def get_terminal_columns(): + """Get the width of the terminal. + + Returns: + The width of the terminal, or zero if the stdout is not + associated with tty. + """ + try: + return shutil.get_terminal_size().columns # Python 3.3~ + except AttributeError: + import fcntl + import termios + import struct + arg = struct.pack('hhhh', 0, 0, 0, 0) + try: + ret = fcntl.ioctl(sys.stdout.fileno(), termios.TIOCGWINSZ, arg) + except IOError as exception: + if exception.errno != errno.ENOTTY: + raise + # If 'Inappropriate ioctl for device' error occurs, + # stdout is probably redirected. Return 0. + return 0 + return struct.unpack('hhhh', ret)[1] + +def get_devnull(): + """Get the file object of '/dev/null' device.""" + try: + devnull = subprocess.DEVNULL # py3k + except AttributeError: + devnull = open(os.devnull, 'wb') + return devnull + +def check_top_directory(): + """Exit if we are not at the top of source directory.""" + for f in ('README', 'Licenses'): + if not os.path.exists(f): + print >> sys.stderr, 'Please run at the top of source directory.' + sys.exit(1) + +def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip() + +### classes ### +class MaintainersDatabase: + + """The database of board status and maintainers.""" + + def __init__(self): + """Create an empty database.""" + self.database = {} + + def get_status(self, target): + """Return the status of the given board. + + Returns: + Either 'Active' or 'Orphan' + """ + tmp = self.database[target][0] + if tmp.startswith('Maintained'): + return 'Active' + elif tmp.startswith('Orphan'): + return 'Orphan' + else: + print >> sys.stderr, 'Error: %s: unknown status' % tmp + + def get_maintainers(self, target): + """Return the maintainers of the given board. + + If the board has two or more maintainers, they are separated + with colons. + """ + return ':'.join(self.database[target][1]) + + def parse_file(self, file): + """Parse the given MAINTAINERS file. + + This method parses MAINTAINERS and add board status and + maintainers information to the database. + + Arguments: + file: MAINTAINERS file to be parsed + """ + targets = [] + maintainers = [] + status = '-' + for line in open(file): + tag, rest = line[:2], line[2:].strip() + if tag == 'M:': + maintainers.append(rest) + elif tag == 'F:': + # expand wildcard and filter by 'configs/*_defconfig' + for f in glob.glob(rest): + front, match, rear = f.partition('configs/') + if not front and match: + front, match, rear = rear.rpartition('_defconfig') + if match and not rear: + targets.append(front) + elif tag == 'S:': + status = rest + elif line == '\n' and targets: + for target in targets: + self.database[target] = (status, maintainers) + targets = [] + maintainers = [] + status = '-' + if targets: + for target in targets: + self.database[target] = (status, maintainers) + +class DotConfigParser: + + """A parser of .config file. + + Each line of the output should have the form of: + Status, Arch, CPU, SoC, Vendor, Board, Target, Options, Maintainers + Most of them are extracted from .config file. + MAINTAINERS files are also consulted for Status and Maintainers fields. + """ + + re_arch = re.compile(r'CONFIG_SYS_ARCH="(.*)"') + re_cpu = re.compile(r'CONFIG_SYS_CPU="(.*)"') + re_soc = re.compile(r'CONFIG_SYS_SOC="(.*)"') + re_vendor = re.compile(r'CONFIG_SYS_VENDOR="(.*)"') + re_board = re.compile(r'CONFIG_SYS_BOARD="(.*)"') + re_config = re.compile(r'CONFIG_SYS_CONFIG_NAME="(.*)"') + re_options = re.compile(r'CONFIG_SYS_EXTRA_OPTIONS="(.*)"') + re_list = (('arch', re_arch), ('cpu', re_cpu), ('soc', re_soc), + ('vendor', re_vendor), ('board', re_board), + ('config', re_config), ('options', re_options)) + must_fields = ('arch', 'config') + + def __init__(self, build_dir, output, maintainers_database): + """Create a new .config perser. + + Arguments: + build_dir: Build directory where .config is located + output: File object which the result is written to + maintainers_database: An instance of class MaintainersDatabase + """ + self.dotconfig = os.path.join(build_dir, '.config') + self.output = output + self.database = maintainers_database + + def parse(self, defconfig): + """Parse .config file and output one-line database for the given board. + + Arguments: + defconfig: Board (defconfig) name + """ + fields = {} + for line in open(self.dotconfig): + if not line.startswith('CONFIG_SYS_'): + continue + for (key, pattern) in self.re_list: + m = pattern.match(line) + if m and m.group(1): + fields[key] = m.group(1) + break + + # sanity check of '.config' file + for field in self.must_fields: + if not field in fields: + print >> sys.stderr, 'Error: %s is not defined in %s' % \ + (field, defconfig) + sys.exit(1) + + # fix-up for aarch64 and tegra + if fields['arch'] == 'arm' and 'cpu' in fields: + if fields['cpu'] == 'armv8': + fields['arch'] = 'aarch64' + if 'soc' in fields and re.match('tegra[0-9]*$', fields['soc']): + fields['cpu'] += ':arm720t' + + target, match, rear = defconfig.partition('_defconfig') + assert match and not rear, \ + '%s : invalid defconfig file name' % defconfig + + fields['status'] = self.database.get_status(target) + fields['maintainers'] = self.database.get_maintainers(target) + + if 'options' in fields: + options = fields['config'] + ':' + \ + fields['options'].replace(r'\"', '"') + elif fields['config'] != target: + options = fields['config'] + else: + options = '-' + + self.output.write((' '.join(['%s'] * 9) + '\n') % + (fields['status'], + fields['arch'], + fields.get('cpu', '-'), + fields.get('soc', '-'), + fields.get('vendor', '-'), + fields.get('board', '-'), + target, + options, + fields['maintainers'])) + +class Slot: + + """A slot to store a subprocess. + + Each instance of this class handles one subprocess. + This class is useful to control multiple processes + for faster processing. + """ + + def __init__(self, output, maintainers_database, devnull, make_cmd): + """Create a new slot. + + Arguments: + output: File object which the result is written to + maintainers_database: An instance of class MaintainersDatabase + """ + self.occupied = False + self.build_dir = tempfile.mkdtemp() + self.devnull = devnull + self.make_cmd = make_cmd + self.parser = DotConfigParser(self.build_dir, output, + maintainers_database) + + def __del__(self): + """Delete the working directory""" + shutil.rmtree(self.build_dir) + + def add(self, defconfig): + """Add a new subprocess to the slot. + + Fails if the slot is occupied, that is, the current subprocess + is still running. + + Arguments: + defconfig: Board (defconfig) name + + Returns: + Return True on success or False on fail + """ + if self.occupied: + return False + o = 'O=' + self.build_dir + self.ps = subprocess.Popen([self.make_cmd, o, defconfig], + stdout=self.devnull) + self.defconfig = defconfig + self.occupied = True + return True + + def poll(self): + """Check if the subprocess is running and invoke the .config + parser if the subprocess is terminated. + + Returns: + Return True if the subprocess is terminated, False otherwise + """ + if not self.occupied: + return True + if self.ps.poll() == None: + return False + self.parser.parse(self.defconfig) + self.occupied = False + return True + +class Slots: + + """Controller of the array of subprocess slots.""" + + def __init__(self, jobs, output, maintainers_database): + """Create a new slots controller. + + Arguments: + jobs: A number of slots to instantiate + output: File object which the result is written to + maintainers_database: An instance of class MaintainersDatabase + """ + self.slots = [] + devnull = get_devnull() + make_cmd = get_make_cmd() + for i in range(jobs): + self.slots.append(Slot(output, maintainers_database, + devnull, make_cmd)) + + def add(self, defconfig): + """Add a new subprocess if a vacant slot is available. + + Arguments: + defconfig: Board (defconfig) name + + Returns: + Return True on success or False on fail + """ + for slot in self.slots: + if slot.add(defconfig): + return True + return False + + def available(self): + """Check if there is a vacant slot. + + Returns: + Return True if a vacant slot is found, False if all slots are full + """ + for slot in self.slots: + if slot.poll(): + return True + return False + + def empty(self): + """Check if all slots are vacant. + + Returns: + Return True if all slots are vacant, False if at least one slot + is running + """ + ret = True + for slot in self.slots: + if not slot.poll(): + ret = False + return ret + +class Indicator: + + """A class to control the progress indicator.""" + + MIN_WIDTH = 15 + MAX_WIDTH = 70 + + def __init__(self, total): + """Create an instance. + + Arguments: + total: A number of boards + """ + self.total = total + self.cur = 0 + width = get_terminal_columns() + width = min(width, self.MAX_WIDTH) + width -= self.MIN_WIDTH + if width > 0: + self.enabled = True + else: + self.enabled = False + self.width = width + + def inc(self): + """Increment the counter and show the progress bar.""" + if not self.enabled: + return + self.cur += 1 + arrow_len = self.width * self.cur // self.total + msg = '%4d/%d [' % (self.cur, self.total) + msg += '=' * arrow_len + '>' + ' ' * (self.width - arrow_len) + ']' + sys.stdout.write('\r' + msg) + sys.stdout.flush() + +def __gen_boards_cfg(jobs): + """Generate boards.cfg file. + + Arguments: + jobs: The number of jobs to run simultaneously + + Note: + The incomplete boards.cfg is left over when an error (including + the termination by the keyboard interrupt) occurs on the halfway. + """ + check_top_directory() + print 'Generating %s ... (jobs: %d)' % (BOARD_FILE, jobs) + + # All the defconfig files to be processed + defconfigs = [] + for (dirpath, dirnames, filenames) in os.walk(CONFIG_DIR): + dirpath = dirpath[len(CONFIG_DIR) + 1:] + for filename in fnmatch.filter(filenames, '*_defconfig'): + defconfigs.append(os.path.join(dirpath, filename)) + + # Parse all the MAINTAINERS files + maintainers_database = MaintainersDatabase() + for (dirpath, dirnames, filenames) in os.walk('.'): + if 'MAINTAINERS' in filenames: + maintainers_database.parse_file(os.path.join(dirpath, + 'MAINTAINERS')) + + # Output lines should be piped into the reformat tool + reformat_process = subprocess.Popen(REFORMAT_CMD, stdin=subprocess.PIPE, + stdout=open(BOARD_FILE, 'w')) + pipe = reformat_process.stdin + pipe.write(COMMENT_BLOCK) + + indicator = Indicator(len(defconfigs)) + slots = Slots(jobs, pipe, maintainers_database) + + # Main loop to process defconfig files: + # Add a new subprocess into a vacant slot. + # Sleep if there is no available slot. + for defconfig in defconfigs: + while not slots.add(defconfig): + while not slots.available(): + # No available slot: sleep for a while + time.sleep(SLEEP_TIME) + indicator.inc() + + # wait until all the subprocesses finish + while not slots.empty(): + time.sleep(SLEEP_TIME) + print '' + + # wait until the reformat tool finishes + reformat_process.communicate() + if reformat_process.returncode != 0: + print >> sys.stderr, '"%s" failed' % REFORMAT_CMD[0] + sys.exit(1) + +def gen_boards_cfg(jobs): + """Generate boards.cfg file. + + The incomplete boards.cfg is deleted if an error (including + the termination by the keyboard interrupt) occurs on the halfway. + + Arguments: + jobs: The number of jobs to run simultaneously + """ + try: + __gen_boards_cfg(jobs) + except: + # We should remove incomplete boards.cfg + try: + os.remove(BOARD_FILE) + except OSError as exception: + # Ignore 'No such file or directory' error + if exception.errno != errno.ENOENT: + raise + raise + +def main(): + parser = optparse.OptionParser() + # Add options here + parser.add_option('-j', '--jobs', + help='the number of jobs to run simultaneously') + (options, args) = parser.parse_args() + if options.jobs: + try: + jobs = int(options.jobs) + except ValueError: + print >> sys.stderr, 'Option -j (--jobs) takes a number' + sys.exit(1) + else: + try: + jobs = int(subprocess.check_output(['getconf', + '_NPROCESSORS_ONLN'])) + except subprocess.CalledProcessError: + print 'info: failed to get the number of CPUs. Set jobs to 1' + jobs = 1 + gen_boards_cfg(jobs) + +if __name__ == '__main__': + main()
Signature · 1 line
1.9.1
PATCH v8 7/13 tools: add genboardscfg.py
Quoted 15 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
[snip]
tools/genboardscfg.py line 90
Quoted 8 lines
tools/genboardscfg.py new file +8
-0+def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip()
So subprocess.check_output comes from Python 2.7 and Ubuntu 10.04 ships with 2.6. This isn't a deal-breaker as I'm working on updating the two calls here now (and we'll set aside mailmapper, that's not going to be commonly used I think).
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/6dbe596f/attachment.pgp>
PATCH v8 7/13 tools: add genboardscfg.py
Hi Tom,
Quoted 27 lines · Tom Rini
Quoted 15 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
[snip]
tools/genboardscfg.py line 90
Quoted 8 lines
tools/genboardscfg.py new file +8
-0+def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip()
Quoted 4 lines
So subprocess.check_output comes from Python 2.7 and Ubuntu 10.04 ships with 2.6. This isn't a deal-breaker as I'm working on updating the two calls here now (and we'll set aside mailmapper, that's not going to be commonly used I think).
We could use tools/patman/command.py's OutputOneLine().
Regards,
Simon
PATCH v8 7/13 tools: add genboardscfg.py
Quoted 30 lines · Simon Glass
Hi Tom,
Quoted 27 lines · Tom Rini
Quoted 15 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
[snip]
Quoted 8 lines
tools/genboardscfg.py new file +8
-0+def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip()
Quoted 6 lines
Quoted 4 lines
So subprocess.check_output comes from Python 2.7 and Ubuntu 10.04 ships with 2.6. This isn't a deal-breaker as I'm working on updating the two calls here now (and we'll set aside mailmapper, that's not going to be commonly used I think).
We could use tools/patman/command.py's
OutputOneLine().
That feels like a lot of code to borrow, or should we be able to just import and use it? And would you mind reviewing the patch I posted that switches over to subprocess.Popen() ? Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/e6783936/attachment.pgp>
PATCH v8 7/13 tools: add genboardscfg.py
Hi Tom,
Quoted 36 lines · Tom Rini
Quoted 35 lines · Simon Glass
Hi Tom,
Quoted 31 lines · Tom Rini
Quoted 15 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
[snip]
tools/genboardscfg.py line 90
Quoted 8 lines
tools/genboardscfg.py new file +8
-0+def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip()So subprocess.check_output comes from Python 2.7 and Ubuntu 10.04 ships with 2.6. This isn't a deal-breaker as I'm working on updating the two calls here now (and we'll set aside mailmapper, that's not going to be commonly used I think).
Quoted 5 lines
Quoted 1 line
We could use tools/patman/command.py's
OutputOneLine().That feels like a lot of code to borrow, or should we be able to just import and use it? And would you mind reviewing the patch I posted that switches over to
subprocess.Popen()? Thanks!
Yes it is a lot of code. You can just import and borrow it so long as it is available on the python path. See tools/buildman/buildman.py for the code:
# Bring in the patman librariesour_path = os.path.dirname(os.path.realpath(__file__)) sys.path.append(os.path.join(our_path, '../patman'))
I didn't see that patch you mention, will take a look.
Regards,
Simon
PATCH v8 7/13 tools: add genboardscfg.py
In reply to Tom RiniHi Tom,
Quoted 27 lines · On Wed, 30 Jul 2014 10:07:19 -0400 Tom Rini <[email protected]> wrote:
Quoted 15 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
[snip]
tools/genboardscfg.py line 90
Quoted 8 lines
tools/genboardscfg.py new file +8
-0+def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip()
Quoted 4 lines
So subprocess.check_output comes from Python 2.7 and Ubuntu 10.04 ships with 2.6. This isn't a deal-breaker as I'm working on updating the two calls here now (and we'll set aside mailmapper, that's not going to be commonly used I think).
BTW, Ubuntu 10.04 is now being supported only for Server. Desktop support ended in April, 2013.
Ubuntu 12.04 is shipped with Python 2.7.
Best Regards
Masahiro Yamada
PATCH v8 7/13 tools: add genboardscfg.py
Quoted 33 lines · Masahiro Yamada
Hi Tom,
Quoted 27 lines · On Wed, 30 Jul 2014 10:07:19 -0400 Tom Rini <[email protected]> wrote:
Quoted 15 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
[snip]
Quoted 8 lines
tools/genboardscfg.py new file +8
-0+def get_make_cmd(): + """Get the command name of GNU Make.""" + try: + make_cmd = subprocess.check_output([SHOW_GNU_MAKE]) + except subprocess.CalledProcessError: + print >> sys.stderr, 'GNU Make not found' + sys.exit(1) + return make_cmd.rstrip()
Quoted 8 lines
Quoted 4 lines
So subprocess.check_output comes from Python 2.7 and Ubuntu 10.04 ships with 2.6. This isn't a deal-breaker as I'm working on updating the two calls here now (and we'll set aside mailmapper, that's not going to be commonly used I think).
BTW, Ubuntu 10.04 is now being supported only for Server.
Yeah. IT counts build servers as Server not Desktop so I've got access to some beefy build resources that're on that (and staying there for some time to come). :)
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140731/265b2874/attachment.pgp>
PATCH v8 7/13 tools: add genboardscfg.py
In reply to Masahiro YamadaQuoted 11 lines · Masahiro Yamada
Now the primary data for each board is in
Kconfig, defconfig andMAINTAINERS.It is true boards.cfg is needed for MAKEALL and buildman and might be useful to brouse all the supported boards in a single database. But it would be painful to maintain the boards.cfg in sync.
So, this is the solution.
Add a tool to generate the equivalent boards.cfg file based on the latestKconfig, defconfig andMAINTAINERS.
Quoted 7 lines
We can keep all the functions of MAKEALL and buildman with it.
The best thing would be to change MAKEALL and buildman for not depending on boards.cfg in the future, but it would take some time.
Signed-off-by Masahiro Yamada <[email protected]>Acked-by Simon Glass <[email protected]>
With the re-work that we talked about ont he ML for Python 2.6, Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/006ba33a/attachment.pgp>
PATCH v8 8/13 kconfig: remove mkconfig and boards.cfg
In reply to Masahiro YamadaThe old configuration script is no longer necessary. Nor is boards.cfg a primary database.
We can generate it with the genboardscfg.py tool based on the latest Kconfig, defconfig and MAINTAINERS.
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Remove boards.cfg
- Update .gitignore
Changes in v3: None
Changes in v2: None
.gitignore | 1 + boards.cfg | 1226 ------------------------------------------------------------ mkconfig | 186 --------- 3 files changed, 1 insertion(+), 1412 deletions(-) delete mode 100644 boards.cfg delete mode 100755 mkconfig
.gitignore +1 -0
@@ -34,6 +34,7 @@ /SPL /System.map /u-boot* +/boards.cfg # # git files that we don't want to ignore even it they are dot-files
boards.cfg deleted +0 -1226
1,226 lines not on this page · raw message
mkconfig deleted +0 -186
186 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v8 8/13 kconfig: remove mkconfig and boards.cfg
Quoted 7 lines · Masahiro Yamada
The old configuration script is no longer necessary. Nor is boards.cfg a primary database.
We can generate it with thegenboardscfg.pytool based on the latestKconfig, defconfig andMAINTAINERS.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/ad92eb33/attachment.pgp>
PATCH v8 9/13 MAKEALL: adjust for Kconfig
In reply to Masahiro Yamada- Use "make <board>_defconfig" instead of "make <board>_config".
- Invoke tools/genboardscfg.py to generate boards.cfg when it is missing.
- Show "Building ${BOARD_NAME} board..." message. (Prior to Kconfig, instead, mkconfig script displayed "Configuring for ${BOARD_NAME} board..." but it was removed.) Without this message, we cannot know which board is currently being built.
- Do not show "# configuration written to .config". This message is useless and just annoying for MAKEALL.
---
Changes in v8:
- Show "Building ${BOARD_NAME} board..."
- Do not show "# configuration written to .config"
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Generate boards.cfg automatically if it is missing
Changes in v3: None
Changes in v2: None
MAKEALL | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
MAKEALL +13 -3
@@ -171,6 +171,14 @@ GNU_MAKE=$(scripts/show-gnu-make) || { # echo "Remaining arguments:" # for arg do echo '--> '"\`$arg'" ; done +if [ ! -r boards.cfg ]; then + echo "Could not find boards.cfg" + tools/genboardscfg.py || { + echo "Failed to generate boards.cfg" >&2 + exit 1 + } +fi + FILTER="\$1 !~ /^#/" [ "$opt_a" ] && FILTER="${FILTER} && $opt_a" [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
@@ -512,9 +520,9 @@ get_target_location() { set ${line} - CONFIG_NAME="${7%_config}" + CONFIG_NAME="${7%_defconfig}" - [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}" + [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}" if [ $# -gt 5 ]; then if [ "$6" = "-" ] ; then
@@ -651,7 +659,9 @@ build_target() { fi ${MAKE} distclean >/dev/null - ${MAKE} -s ${target}_config + + echo "Building ${target} board..." + ${MAKE} -s ${target}_defconfig >/dev/null ${MAKE} ${JOBS} ${CHECK} all \ >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
Signature · 1 line
1.9.1
PATCH v8 9/13 MAKEALL: adjust for Kconfig
Quoted 11 lines · Masahiro Yamada
- Use "make <board>_defconfig" instead of "make <board>_config".
- Invoke
tools/genboardscfg.pyto generate boards.cfg when it is missing.- Show "Building ${BOARD_NAME} board..." message. (Prior to
Kconfig, instead, mkconfig script displayed "Configuring for ${BOARD_NAME} board..." but it was removed.) Without this message, we cannot know which board is currently being built.
Quoted 5 lines
- Do not show "# configuration written to .config". This message is useless and just annoying for MAKEALL.
Signed-off-by Masahiro Yamada <[email protected]>Acked-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/f3eca81b/attachment.pgp>
PATCH v8 10/13 buildman: adjust for Kconfig
In reply to Masahiro YamadaUse "make <board>_defconfig" instead of "make <board>_config".
Invoke tools/genboardscfg.py to generate boards.cfg when it is missing.
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Generate boards.cfg automatically if it is missing
Changes in v3: None
Changes in v2: None
tools/buildman/board.py | 2 +- tools/buildman/builder.py | 6 +++--- tools/buildman/control.py | 10 ++++++++++ 3 files changed, 14 insertions(+), 4 deletions(-)
tools/buildman/board.py +1 -1
@@ -17,7 +17,7 @@ class Board: soc: Name of SOC, or '' if none (e.g. mx31) vendor: Name of vendor (e.g. armltd) board_name: Name of board (e.g. integrator) - target: Target name (use make <target>_config to configure) + target: Target name (use make <target>_defconfig to configure) options: board-specific options (e.g. integratorcp:CM1136) """ self.target = target
tools/buildman/builder.py +3 -3
@@ -199,7 +199,7 @@ class BuilderThread(threading.Thread): commit_upto: Commit number to build (0...n-1) brd: Board object to build work_dir: Directory to which the source will be checked out - do_config: True to run a make <board>_config on the source + do_config: True to run a make <board>_defconfig on the source force_build: Force a build even if one was previously done force_build_failures: Force a bulid if the previous result showed failure
@@ -266,7 +266,7 @@ class BuilderThread(threading.Thread): args.append('-s') if self.builder.num_jobs is not None: args.extend(['-j', str(self.builder.num_jobs)]) - config_args = ['%s_config' % brd.target] + config_args = ['%s_defconfig' % brd.target] config_out = '' args.extend(self.builder.toolchains.GetMakeArguments(brd))
@@ -419,7 +419,7 @@ class BuilderThread(threading.Thread): work_dir = self.builder.GetThreadDir(self.thread_num) self.toolchain = None if job.commits: - # Run 'make board_config' on the first commit + # Run 'make board_defconfig' on the first commit do_config = True commit_upto = 0 force_build = False
tools/buildman/control.py +10 -0
@@ -15,6 +15,7 @@ import patchstream import terminal import toolchain import command +import subprocess def GetPlural(count): """Returns a plural 's' if count is not 1"""
@@ -109,6 +110,15 @@ def DoBuildman(options, args): sys.exit(1) # Work out what subset of the boards we are building + board_file = os.path.join(options.git, 'boards.cfg') + if not os.path.exists(board_file): + print 'Could not find %s' % board_file + status = subprocess.call([os.path.join(options.git, + 'tools/genboardscfg.py')]) + if status != 0: + print >> sys.stderr, "Failed to generate boards.cfg" + sys.exit(1) + boards = board.Boards() boards.ReadBoards(os.path.join(options.git, 'boards.cfg')) why_selected = boards.SelectBoards(args)
Signature · 1 line
1.9.1
PATCH v8 10/13 buildman: adjust for Kconfig
Quoted 6 lines · Masahiro Yamada
Use "make <board>_defconfig" instead of "make <board>_config".
Invoke
tools/genboardscfg.pyto generate boards.cfg when it is missing.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/d1c8af47/attachment.pgp>
PATCH v8 11/13 kconfig: delete redundant CONFIG_${ARCH} definition
In reply to Masahiro YamadaCONFIG_${ARCH} is defined by Kconfig.
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Rebase on the current u-boot/master
Changes in v3: None
Changes in v2: None
arch/arc/config.mk | 2 +- arch/arm/config.mk | 2 +- arch/avr32/config.mk | 1 - arch/blackfin/config.mk | 1 - arch/m68k/config.mk | 2 +- arch/mips/config.mk | 2 +- arch/nds32/config.mk | 2 +- arch/nios2/config.mk | 2 +- arch/openrisc/config.mk | 2 +- arch/powerpc/config.mk | 2 +- arch/sandbox/config.mk | 2 +- arch/sparc/config.mk | 2 +- arch/x86/cpu/config.mk | 2 +- include/configs/microblaze-generic.h | 1 - 14 files changed, 11 insertions(+), 14 deletions(-)
arch/arc/config.mk +1 -1
@@ -21,7 +21,7 @@ ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := $(ARC_CROSS_COMPILE) endif -PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -DCONFIG_ARC -gdwarf-2 +PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2 # Needed for relocation LDFLAGS_FINAL += -pie
arch/arm/config.mk +1 -1
@@ -22,7 +22,7 @@ PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \ # Support generic board on ARM __HAVE_ARCH_GENERIC_BOARD := y -PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ +PLATFORM_CPPFLAGS += -D__ARM__ # Choose between ARM/Thumb instruction sets ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
arch/avr32/config.mk +0 -1
@@ -9,7 +9,6 @@ ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := avr32-linux- endif -PLATFORM_CPPFLAGS += -DCONFIG_AVR32 CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax
arch/blackfin/config.mk +0 -1
@@ -21,7 +21,6 @@ endif CONFIG_BFIN_BOOT_MODE := $(strip $(CONFIG_BFIN_BOOT_MODE:"%"=%)) PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic -PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN LDFLAGS_FINAL += --gc-sections LDFLAGS += -m elf32bfin
arch/m68k/config.mk +1 -1
@@ -11,7 +11,7 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000 -PLATFORM_CPPFLAGS += -DCONFIG_M68K -D__M68K__ +PLATFORM_CPPFLAGS += -D__M68K__ PLATFORM_LDFLAGS += -n PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
arch/mips/config.mk +1 -1
@@ -25,7 +25,7 @@ endif # Default to EB if no endianess is configured ENDIANNESS ?= -EB -PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ +PLATFORM_CPPFLAGS += -D__MIPS__ __HAVE_ARCH_GENERIC_BOARD := y
arch/nds32/config.mk +1 -1
@@ -17,6 +17,6 @@ CONFIG_STANDALONE_LOAD_ADDR = 0x300000 \ PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -mrelax PLATFORM_RELFLAGS += -gdwarf-2 -PLATFORM_CPPFLAGS += -DCONFIG_NDS32 -D__nds32__ -G0 -ffixed-10 -fpie +PLATFORM_CPPFLAGS += -D__nds32__ -G0 -ffixed-10 -fpie LDFLAGS_u-boot = --gc-sections --relax
arch/nios2/config.mk +1 -1
@@ -12,7 +12,7 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x02000000 -PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__ +PLATFORM_CPPFLAGS += -D__NIOS2__ PLATFORM_CPPFLAGS += -G0 LDFLAGS_FINAL += --gc-sections
arch/openrisc/config.mk +1 -1
@@ -11,6 +11,6 @@ endif # r10 used for global object pointer, already set in OR32 GCC but just to be # clear -PLATFORM_CPPFLAGS += -DCONFIG_OPENRISC -D__OR1K__ -ffixed-r10 +PLATFORM_CPPFLAGS += -D__OR1K__ -ffixed-r10 CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
arch/powerpc/config.mk +1 -1
@@ -13,7 +13,7 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections \ -meabi -PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__ -ffixed-r2 +PLATFORM_CPPFLAGS += -D__powerpc__ -ffixed-r2 PLATFORM_LDFLAGS += -n # Support generic board on PPC
arch/sandbox/config.mk +1 -1
@@ -1,7 +1,7 @@ # Copyright (c) 2011 The Chromium OS Authors. # SPDX-License-Identifier: GPL-2.0+ -PLATFORM_CPPFLAGS += -DCONFIG_SANDBOX -D__SANDBOX__ -U_FORTIFY_SOURCE +PLATFORM_CPPFLAGS += -D__SANDBOX__ -U_FORTIFY_SOURCE PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM -DCONFIG_SYS_GENERIC_BOARD PLATFORM_LIBS += -lrt
arch/sparc/config.mk +1 -1
@@ -14,4 +14,4 @@ gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \ -T $(srctree)/examples/standalone/sparc.lds -PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__ +PLATFORM_CPPFLAGS += -D__sparc__
arch/x86/cpu/config.mk +1 -1
@@ -7,7 +7,7 @@ CROSS_COMPILE ?= i386-linux- -PLATFORM_CPPFLAGS += -DCONFIG_X86 -D__I386__ -Werror +PLATFORM_CPPFLAGS += -D__I386__ -Werror # DO NOT MODIFY THE FOLLOWING UNLESS YOU REALLY KNOW WHAT YOU ARE DOING! LDPPFLAGS += -DRESET_SEG_START=0xffff0000
include/configs/microblaze-generic.h +0 -1
@@ -12,7 +12,6 @@#include "../board/xilinx/microblaze-generic/xparameters.h" /* MicroBlaze CPU */ -#define CONFIG_MICROBLAZE 1#define MICROBLAZE_V5 1/* Open Firmware DTS */
Signature · 1 line
1.9.1
PATCH v8 11/13 kconfig: delete redundant CONFIG_${ARCH} definition
Quoted 4 lines · Masahiro Yamada
CONFIG_${ARCH} is defined by
Kconfig.Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/9b00fa29/attachment.pgp>
PATCH v8 12/13 powerpc: remove redundant CPU definition
In reply to Masahiro YamadaCONFIG_${CPU} is defined by Kconfig.
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Newly added
Changes in v3: None
Changes in v2: None
arch/powerpc/cpu/74xx_7xx/config.mk | 2 +- arch/powerpc/cpu/mpc512x/config.mk | 2 +- arch/powerpc/cpu/mpc5xx/config.mk | 2 +- arch/powerpc/cpu/mpc5xxx/config.mk | 3 +-- arch/powerpc/cpu/mpc824x/config.mk | 2 +- arch/powerpc/cpu/mpc8260/config.mk | 2 +- arch/powerpc/cpu/mpc83xx/config.mk | 2 +- arch/powerpc/cpu/mpc85xx/config.mk | 2 +- arch/powerpc/cpu/mpc86xx/config.mk | 2 +- arch/powerpc/cpu/mpc8xx/config.mk | 2 +- arch/powerpc/cpu/ppc4xx/config.mk | 2 +- 11 files changed, 11 insertions(+), 12 deletions(-)
arch/powerpc/cpu/74xx_7xx/config.mk +1 -1
@@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -mstring +PLATFORM_CPPFLAGS += -mstring
arch/powerpc/cpu/mpc512x/config.mk +1 -1
@@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 -msoft-float -mcpu=603e +PLATFORM_CPPFLAGS += -DCONFIG_E300 -msoft-float -mcpu=603e
arch/powerpc/cpu/mpc5xx/config.mk +1 -1
@@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_5xx -mpowerpc -msoft-float +PLATFORM_CPPFLAGS += -mpowerpc -msoft-float
arch/powerpc/cpu/mpc5xxx/config.mk +1 -2
@@ -5,5 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx \ - -mstring -mcpu=603e -mmultiple +PLATFORM_CPPFLAGS += -mstring -mcpu=603e -mmultiple
arch/powerpc/cpu/mpc824x/config.mk +1 -1
@@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -mstring -mcpu=603e -msoft-float +PLATFORM_CPPFLAGS += -mstring -mcpu=603e -msoft-float
arch/powerpc/cpu/mpc8260/config.mk +1 -1
@@ -5,5 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC8260 -DCONFIG_CPM2 \ +PLATFORM_CPPFLAGS += -DCONFIG_CPM2 \ -mstring -mcpu=603e -mmultiple
arch/powerpc/cpu/mpc83xx/config.mk +1 -1
@@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 -msoft-float +PLATFORM_CPPFLAGS += -DCONFIG_E300 -msoft-float
arch/powerpc/cpu/mpc85xx/config.mk +1 -1
@@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx -Wa,-me500 -msoft-float -mno-string +PLATFORM_CPPFLAGS += -Wa,-me500 -msoft-float -mno-string # -mspe=yes is needed to have -mno-spe accepted by a buggy GCC; # see "[PATCH,rs6000] make -mno-spe work as expected" on
arch/powerpc/cpu/mpc86xx/config.mk +1 -1
@@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx -mstring -maltivec -mabi=altivec -msoft-float +PLATFORM_CPPFLAGS += -mstring -maltivec -mabi=altivec -msoft-float
arch/powerpc/cpu/mpc8xx/config.mk +1 -1
@@ -5,4 +5,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_8xx -mstring -mcpu=860 -msoft-float +PLATFORM_CPPFLAGS += -mstring -mcpu=860 -msoft-float
arch/powerpc/cpu/ppc4xx/config.mk +1 -1
@@ -5,7 +5,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_4xx -mstring -msoft-float +PLATFORM_CPPFLAGS += -mstring -msoft-float cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h is440:=$(shell grep CONFIG_440 $(cfg))
Signature · 1 line
1.9.1
PATCH v8 12/13 powerpc: remove redundant CPU definition
Quoted 4 lines · Masahiro Yamada
CONFIG_${CPU} is defined by
Kconfig.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Simon Glass <[email protected]>
Thanks Masahiro for all your hard work on this:
Thanks,
Stefan
PATCH v8 12/13 powerpc: remove redundant CPU definition
In reply to Masahiro YamadaQuoted 5 lines · Masahiro Yamada
CONFIG_${CPU} is defined by
Kconfig.Signed-off-by Masahiro Yamada <[email protected]>Acked-by Stefan Roese <[email protected]>Acked-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/ebd0016f/attachment.pgp>
PATCH v8 13/13 include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
In reply to Masahiro YamadaNow CONFIG_SPL and CONFIG_TPL are defined in Kconfig.
Remove the redundant definition in config headers.
---
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
- Rebase on the current u-boot/master
Changes in v3:
- Rebase on the current u-boot/master
Changes in v2:
- Rebase on the current u-boot/master
include/configs/B4860QDS.h | 1 - include/configs/BSC9131RDB.h | 1 - include/configs/BSC9132QDS.h | 1 - include/configs/C29XPCIE.h | 2 -- include/configs/MPC8313ERDB.h | 1 - include/configs/P1010RDB.h | 4 ---- include/configs/P1022DS.h | 4 ---- include/configs/P1_P2_RDB.h | 4 ---- include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240QDS.h | 1 - include/configs/a3m071.h | 1 - include/configs/am335x_igep0033.h | 1 - include/configs/am3517_crane.h | 1 - include/configs/am3517_evm.h | 1 - include/configs/apf27.h | 1 - include/configs/arndale.h | 1 - include/configs/bur_am335x_common.h | 1 - include/configs/cam_enc_4xx.h | 1 - include/configs/cm_t35.h | 1 - include/configs/da850evm.h | 1 - include/configs/devkit8000.h | 1 - include/configs/exynos5-dt.h | 1 - include/configs/hawkboard.h | 1 - include/configs/ipam390.h | 1 - include/configs/lwmon5.h | 1 - include/configs/m53evk.h | 1 - include/configs/mcx.h | 1 - include/configs/microblaze-generic.h | 1 - include/configs/mx31pdk.h | 1 - include/configs/mxs.h | 1 - include/configs/omap3_evm_common.h | 1 - include/configs/omap3_zoom1.h | 1 - include/configs/origen.h | 1 - include/configs/p1_p2_rdb_pc.h | 4 ---- include/configs/palmtreo680.h | 1 - include/configs/pcm051.h | 1 - include/configs/sama5d3_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/smdkv310.h | 1 - include/configs/socfpga_cyclone5.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/tam3517-common.h | 1 - include/configs/tao3530.h | 1 - include/configs/tegra-common.h | 1 - include/configs/ti814x_evm.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_common.h | 1 - include/configs/tricorder.h | 1 - include/configs/tx25.h | 1 - include/configs/vpac270.h | 1 - include/configs/woodburn_sd.h | 1 - include/configs/x600.h | 1 - include/configs/zynq-common.h | 1 - 56 files changed, 69 deletions(-)
include/configs/B4860QDS.h +0 -1
@@ -23,7 +23,6 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/BSC9131RDB.h +0 -1
@@ -25,7 +25,6 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL 1#define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT
include/configs/BSC9132QDS.h +0 -1
@@ -41,7 +41,6 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL 1#define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT
include/configs/C29XPCIE.h +0 -2
@@ -24,8 +24,6 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL 1 -#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/MPC8313ERDB.h +0 -1
@@ -19,7 +19,6 @@#define CONFIG_MPC8313ERDB 1#ifdef CONFIG_NAND -#define CONFIG_SPL 1#define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT
include/configs/P1010RDB.h +0 -4
@@ -21,7 +21,6 @@#define CONFIG_NAND_FSL_IFC #ifdef CONFIG_SDCARD -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT
@@ -56,7 +55,6 @@#define CONFIG_SYS_TEXT_BASE 0x11000000#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc#else -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_ENV_SUPPORT
@@ -88,7 +86,6 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL 1#ifdef CONFIG_SECURE_BOOT #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT
@@ -108,7 +105,6 @@#define CONFIG_SYS_NAND_U_BOOT_OFFS 0#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"#else -#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/P1022DS.h +0 -4
@@ -16,7 +16,6 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -45,7 +44,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -79,8 +77,6 @@#define CONFIG_SYS_NAND_MAX_OOBFREE 5#ifdef CONFIG_NAND -#define CONFIG_SPL 1 -#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/P1_P2_RDB.h +0 -4
@@ -36,7 +36,6 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -64,7 +63,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -93,8 +91,6 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL 1 -#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/T104xRDB.h +0 -1
@@ -22,7 +22,6 @@#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg#endif -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/T208xQDS.h +0 -1
@@ -55,7 +55,6 @@#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg#endif -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/T208xRDB.h +0 -1
@@ -44,7 +44,6 @@#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/T4240QDS.h +0 -1
@@ -25,7 +25,6 @@#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc#else -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
include/configs/a3m071.h +0 -1
@@ -412,7 +412,6 @@/* * SPL related defines */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT
include/configs/am335x_igep0033.h +0 -1
@@ -211,7 +211,6 @@#undef CONFIG_USE_IRQ/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK /* * Place the image at the start of the ROM defined image space.
include/configs/am3517_crane.h +0 -1
@@ -293,7 +293,6 @@ GENERATED_GBL_DATA_SIZE)/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE
include/configs/am3517_evm.h +0 -1
@@ -302,7 +302,6 @@ GENERATED_GBL_DATA_SIZE)/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE
include/configs/apf27.h +0 -1
@@ -37,7 +37,6 @@/* * SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048
include/configs/arndale.h +0 -1
@@ -121,7 +121,6 @@/* MMC SPL */ #define CONFIG_EXYNOS_SPL -#define CONFIG_SPL 1#define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/bur_am335x_common.h +0 -1
@@ -164,7 +164,6 @@* under common/spl/. Given our generally common memory map, we set a * number of related defaults and sizes here. */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK /* * Place the image at the start of the ROM defined image space.
include/configs/cam_enc_4xx.h +0 -1
@@ -199,7 +199,6 @@#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_LIBGENERIC_SUPPORT
include/configs/cm_t35.h +0 -1
@@ -316,7 +316,6 @@#define CONFIG_OMAP3_SPI /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/da850evm.h +0 -1
@@ -368,7 +368,6 @@#ifndef CONFIG_DIRECT_NOR_BOOT /* defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
include/configs/devkit8000.h +0 -1
@@ -281,7 +281,6 @@#define CONFIG_SYS_SRAM_SIZE 0x10000/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/exynos5-dt.h +0 -1
@@ -136,7 +136,6 @@#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20/* MMC SPL */ -#define CONFIG_SPL 1#define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/hawkboard.h +0 -1
@@ -46,7 +46,6 @@#endif /* Spl */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SUPPORT
include/configs/ipam390.h +0 -1
@@ -298,7 +298,6 @@"-(rootfs)" /* defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
include/configs/lwmon5.h +0 -1
@@ -665,7 +665,6 @@* SPL related defines */ #ifdef CONFIG_LCD4_LWMON5 -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT
include/configs/m53evk.h +0 -1
@@ -252,7 +252,6 @@/* * NAND SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"#define CONFIG_SPL_BOARD_INIT
include/configs/mcx.h +0 -1
@@ -344,7 +344,6 @@ GENERATED_GBL_DATA_SIZE)/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE
include/configs/microblaze-generic.h +0 -1
@@ -447,7 +447,6 @@#endif /* SPL part */ -#define CONFIG_SPL 1#define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/mx31pdk.h +0 -1
@@ -29,7 +29,6 @@#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS -#define CONFIG_SPL 1#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048
include/configs/mxs.h +0 -1
@@ -50,7 +50,6 @@#define CONFIG_ARCH_MISC_INIT /* SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_NO_CPU_SUPPORT_CODE #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
include/configs/omap3_evm_common.h +0 -1
@@ -257,7 +257,6 @@#define CONFIG_SYS_CACHELINE_SIZE 64/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40200800#define CONFIG_SPL_MAX_SIZE (54 * 1024)/* 8 KB for stack */
include/configs/omap3_zoom1.h +0 -1
@@ -26,7 +26,6 @@#include <configs/ti_omap3_common.h> /* Remove SPL boot option - we do not support that on LDP yet */ -#undef CONFIG_SPL#undef CONFIG_SPL_FRAMEWORK#undef CONFIG_SPL_OS_BOOT
include/configs/origen.h +0 -1
@@ -65,7 +65,6 @@#undef CONFIG_CMD_NFS/* MMC SPL */ -#define CONFIG_SPL 1#define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_TEXT_BASE 0x02021410
include/configs/p1_p2_rdb_pc.h +0 -4
@@ -148,7 +148,6 @@#endif #ifdef CONFIG_SDCARD -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -177,7 +176,6 @@#endif #ifdef CONFIG_SPIFLASH -#define CONFIG_SPL 1#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT
@@ -207,8 +205,6 @@#endif #ifdef CONFIG_NAND -#define CONFIG_SPL 1 -#define CONFIG_TPL 1#ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_NAND_BOOT #define CONFIG_SPL_FLUSH_IMAGE
include/configs/palmtreo680.h +0 -1
@@ -205,7 +205,6 @@/* * SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_TEXT_BASE 0xa1700000/* IPL loads SPL here */ #define CONFIG_SPL_STACK 0x5c040000/* end of internal SRAM */ #define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */
include/configs/pcm051.h +0 -1
@@ -197,7 +197,6 @@#define CONFIG_ENV_IS_NOWHERE /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT /*
include/configs/sama5d3_xplained.h +0 -1
@@ -209,7 +209,6 @@#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)/* SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000#define CONFIG_SPL_MAX_SIZE 0x10000
include/configs/sama5d3xek.h +0 -1
@@ -244,7 +244,6 @@#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000#define CONFIG_SPL_MAX_SIZE 0x10000
include/configs/siemens-am33x-common.h +0 -1
@@ -139,7 +139,6 @@#define CONFIG_SYS_I2C_OMAP24XX /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x402F0400#define CONFIG_SPL_MAX_SIZE (101 * 1024)
include/configs/smdkv310.h +0 -1
@@ -76,7 +76,6 @@#define CONFIG_ZERO_BOOTDELAY_CHECK /* MMC SPL */ -#define CONFIG_SPL 1#define CONFIG_SKIP_LOWLEVEL_INIT #define COPY_BL2_FNPTR_ADDR 0x00002488
include/configs/socfpga_cyclone5.h +0 -1
@@ -223,7 +223,6 @@*/ /* Enable building of SPL globally */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK /* TEXT_BASE for linking the SPL binary */
include/configs/sunxi-common.h +0 -1
@@ -127,7 +127,6 @@#ifdef CONFIG_SPL_FEL -#define CONFIG_SPL 1#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl-fel.lds"#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7/sunxi"#define CONFIG_SPL_TEXT_BASE 0x2000
include/configs/tam3517-common.h +0 -1
@@ -215,7 +215,6 @@#define CONFIG_NET_RETRY_COUNT 10/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_CONSOLE
include/configs/tao3530.h +0 -1
@@ -301,7 +301,6 @@#define CONGIG_CMD_STORAGE /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/tegra-common.h +0 -1
@@ -131,7 +131,6 @@#define CONFIG_CMD_ENTERRCM /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_RAM_DEVICE #define CONFIG_SPL_BOARD_INIT
include/configs/ti814x_evm.h +0 -1
@@ -168,7 +168,6 @@#define CONFIG_ENV_IS_NOWHERE /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40300000#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
include/configs/ti816x_evm.h +0 -1
@@ -134,7 +134,6 @@/* SPL */ /* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x40400000#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
include/configs/ti_armv7_common.h +0 -1
@@ -198,7 +198,6 @@*/ #if !defined(CONFIG_NOR_BOOT ) && \ !(defined(CONFIG_QSPI_BOOT ) && defined(CONFIG_AM43XX )) -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_OS_BOOT
include/configs/tricorder.h +0 -1
@@ -331,7 +331,6 @@#define CONFIG_SYS_SRAM_SIZE 0x10000/* Defines for SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_NAND_SIMPLE
include/configs/tx25.h +0 -1
@@ -21,7 +21,6 @@#define CONFIG_SYS_MONITOR_LEN (256 << 10)/* 256 kB for U-Boot */ -#define CONFIG_SPL 1#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"#define CONFIG_SPL_MAX_SIZE 2048
include/configs/vpac270.h +0 -1
@@ -17,7 +17,6 @@#define CONFIG_SYS_TEXT_BASE 0xa0000000#ifdef CONFIG_ONENAND -#define CONFIG_SPL 1#define CONFIG_SPL_ONENAND_SUPPORT #define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000#define CONFIG_SPL_ONENAND_LOAD_SIZE \
include/configs/woodburn_sd.h +0 -1
@@ -20,7 +20,6 @@/* * SPL */ -#define CONFIG_SPL 1#define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds"#define CONFIG_SPL_LIBCOMMON_SUPPORT
include/configs/x600.h +0 -1
@@ -274,7 +274,6 @@/* * SPL related defines */ -#define CONFIG_SPL 1#define CONFIG_SPL_TEXT_BASE 0xd2800b00#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
include/configs/zynq-common.h +0 -1
@@ -257,7 +257,6 @@#define CONFIG_CMD_TFTPPUT /* SPL part */ -#define CONFIG_SPL 1#define CONFIG_CMD_SPL #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_LIBCOMMON_SUPPORT
Signature · 1 line
1.9.1
PATCH v8 13/13 include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
Quoted 6 lines · Masahiro Yamada
Now
CONFIG_SPLandCONFIG_TPLare defined inKconfig.Remove the redundant definition in config headers.
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Simon Glass <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/3e622397/attachment.pgp>
v8 cover Kconfig for U-Boot
In reply to Masahiro YamadaQuoted 10 lines · Masahiro Yamada
This series introduces
Kconfig.Besides Linux Kernel,
Kconfigis used in some projects, such as, BusyBox, Buildroot.But our situation is a little more complicated. For one board, we need to generate 3 images at most:
Normal image, SPL and TPL.Each image needs its own configuration input.
Thanks again for all the hard work!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140730/4249d613/attachment.pgp>
v8 cover Kconfig for U-Boot
Quoted 7 lines · Tom Rini
Quoted 5 lines · Masahiro Yamada
This series introduces
Kconfig.Besides Linux Kernel,
Kconfigis used in some projects, such as, BusyBox, Buildroot.
Quoted 7 lines
Quoted 5 lines
But our situation is a little more complicated. For one board, we need to generate 3 images at most:
Normal image, SPL and TPL.Each image needs its own configuration input.
Thanks again for all the hard work!
Congratulations on getting this in, Masahiro! It's a bit step forward for U-Boot.
Regards,
Simon