kernel BUG at include/linux/mtd/map.h:148!
Hello,
This is an old BUG that still lives in linux-next.
[ 4.284620] device id = 2670 [ 4.286157] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.287060] ------------[ cut here ]------------ [ 4.287722] kernel BUG at include/linux/mtd/map.h:148! [ 4.288048] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.288048] CPU 1 [ 4.288048] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00162-g49099c4 #17 Bochs Bochs [ 4.288048] RIP: 0010:[<ffffffff8177e8de>] [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.288048] RSP: 0018:ffff880011049e20 EFLAGS: 00010246 [ 4.288048] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 4.288048] RDX: ffff880011049e20 RSI: ffffffff82a23580 RDI: ffff880011049e80 [ 4.288048] RBP: ffff880011049e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 4.288048] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 4.288048] R13: ffffffff828790ce R14: 0000000000000000 R15: 0000000000000000 [ 4.288048] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 4.288048] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.288048] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000406e0 [ 4.288048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.288048] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.288048] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 4.288048] Stack: [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] Call Trace: [ 4.288048] [<ffffffff81779e05>] cfi_probe+0x15/0x17 [ 4.288048] [<ffffffff81779d9b>] do_map_probe+0xa0/0xac [ 4.288048] [<ffffffff834d1aac>] ? physmap_init+0x12/0x12 [ 4.288048] [<ffffffff834d1bb0>] init_sbc_gxx+0x104/0x15b [ 4.288048] [<ffffffff8348d1b3>] do_one_initcall+0x86/0x208 [ 4.288048] [<ffffffff8348d442>] kernel_init+0x10d/0x1c2 [ 4.288048] [<ffffffff8348c739>] ? do_early_param+0xc3/0xc3 [ 4.288048] [<ffffffff8207b2f4>] kernel_thread_helper+0x4/0x10 [ 4.288048] [<ffffffff820797b4>] ? retint_restore_args+0x13/0x13 [ 4.288048] [<ffffffff8348d335>] ? do_one_initcall+0x208/0x208 [ 4.288048] [<ffffffff8207b2f0>] ? gs_change+0x13/0x13 [ 4.288048] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 4.288048] RIP [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.288048] RSP <ffff880011049e20> [ 4.321423] ---[ end trace 169195d5d1f9be6e ]--- [ 4.322118] swapper/0 (1) used greatest stack depth: 3768 bytes left
This script may reproduce the error.
----------------------------------------------------------------------------
#!/bin/bash
kernel=$1
initrd=quantal-core-x86_64.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel $kernel -initrd $initrd -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -serial stdio -display none -monitor null
)
append=(
hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw drbd.minor_count=8
)
"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------
Thanks,
Fengguang
early console in setup code
Probing EDD (edd=off to disable)... ok
early console in decompress_kernel
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-rc4-00162-g49099c4 (kbuild@lkp-hsx01) (gcc version 4.8.2 (Debian 4.8.2-18) ) #17 SMP PREEMPT Tue Aug 5 16:41:03 CST 2014 [ 0.000000] Command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:49099c4991da3c94773f888aea2e9d27b8a7c6d1:bisect-linux1/.vmlinuz-49099c4991da3c94773f888aea2e9d27b8a7c6d1-20140805164127-2-kbuild branch=linux-devel/devel-hourly-2014080511 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/vmlinuz-3.5.0-rc4-00162-g49099c4 drbd.minor_count=8 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x13ffdfff] [ 0.000000] [mem 0x00000000-0x13dfffff] page 2M [ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x13ffdfff @ [mem 0x1289b000-0x1293cfff] [ 0.000000] RAMDISK: [mem 0x1293d000-0x13feffff] [ 0.000000] ACPI: RSDP 00000000000fd950 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0000000013ffe450 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0000000013ffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0000000013ffe490 011A9 (v01 BXPC BXDSDT 00000001 INTL 20100528) [ 0.000000] ACPI: FACS 0000000013ffff40 00040 [ 0.000000] ACPI: SSDT 0000000013fff7a0 00796 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: APIC 0000000013fff680 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0000000013fff640 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000013ffdfff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13ffdfff] [ 0.000000] NODE_DATA [mem 0x12918000-0x1293cfff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:348ac41, boot clock [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x00010000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x13ffdfff] [ 0.000000] On node 0 totalpages: 81805 [ 0.000000] DMA32 zone: 1280 pages used for memmap [ 0.000000] DMA32 zone: 6 pages reserved [ 0.000000] DMA32 zone: 80519 pages, LIFO batch:15 [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fa000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5f9000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 473 pages/cpu @ffff880012400000 s1915328 r0 d22080 u2097152 [ 0.000000] pcpu-alloc: s1915328 r0 d22080 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] kvm-clock: cpu 0, msr 0:125d2c41, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 1240dd00 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 80519 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:49099c4991da3c94773f888aea2e9d27b8a7c6d1:bisect-linux1/.vmlinuz-49099c4991da3c94773f888aea2e9d27b8a7c6d1-20140805164127-2-kbuild branch=linux-devel/devel-hourly-2014080511 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/vmlinuz-3.5.0-rc4-00162-g49099c4 drbd.minor_count=8 [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Memory: 242812k/327672k available (16878k kernel code, 452k absent, 84408k reserved, 18669k data, 3160k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] ODEBUG: 8 of 8 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] Detected 2693.332 MHz processor. [ 0.008000] Calibrating delay loop (skipped) preset value.. 5386.66 BogoMIPS (lpj=10773328) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008413] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.009834] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.011089] Mount-cache hash table entries: 256 [ 0.014042] Initializing cgroup subsys debug [ 0.014762] Initializing cgroup subsys devices [ 0.015482] Initializing cgroup subsys freezer [ 0.016490] mce: CPU supports 10 MCE banks [ 0.017236] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.024322] Freeing SMP alternatives: 36k freed [ 0.025291] ACPI: Core revision 20120320 [ 0.083826] ftrace: allocating 40914 entries in 160 pages [ 0.100908] Getting VERSION: 1050014 [ 0.104036] Getting VERSION: 1050014 [ 0.104753] Getting ID: 0 [ 0.105292] Getting ID: ff000000 [ 0.105929] Getting LVT0: 8700 [ 0.108033] Getting LVT1: 8400 [ 0.108732] enabled ExtINT on CPU#0 [ 0.111099] ENABLING IO-APIC IRQs [ 0.111769] init IO_APIC IRQs [ 0.112029] apic 0 pin 0 not connected [ 0.112867] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.114473] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.116116] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.117665] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.119287] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.120109] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.121598] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.124097] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.125588] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.127040] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.128102] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.129729] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.132111] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.133682] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.135306] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.136054] apic 0 pin 16 not connected [ 0.136776] apic 0 pin 17 not connected [ 0.137468] apic 0 pin 18 not connected [ 0.138219] apic 0 pin 19 not connected [ 0.140024] apic 0 pin 20 not connected [ 0.140794] apic 0 pin 21 not connected [ 0.141503] apic 0 pin 22 not connected [ 0.142258] apic 0 pin 23 not connected [ 0.143220] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.144031] CPU0: Intel Core Processor (Haswell) stepping 01 [ 0.145336] Using local APIC timer interrupts. [ 0.145336] calibrating APIC timer ... [ 0.148008] ... lapic delta = 6235019 [ 0.148008] ... PM-Timer delta = 357084 [ 0.148008] ... PM-Timer result ok [ 0.148008] ..... delta 6235019 [ 0.148008] ..... mult: 267775290 [ 0.148008] ..... calibration result: 3990412 [ 0.148008] ..... CPU clock speed is 2686.3800 MHz. [ 0.148008] ..... host bus clock speed is 997.2412 MHz. [ 0.148114] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.164742] ftrace: Allocated trace_printk buffers [ 0.172036] lockdep: fixing up alternatives. [ 0.172888] Booting Node 0, Processors #1 Ok. [ 0.008000] kvm-clock: cpu 1, msr 0:127d2c41, secondary cpu clock [ 0.008000] masked ExtINT on CPU#1 [ 0.008000] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.188111] KVM setup async PF for cpu 1 [ 0.188265] Brought up 2 CPUs [ 0.188277] ---------------- [ 0.188278] | NMI testsuite: [ 0.188279] -------------------- [ 0.188254] kvm-stealtime: cpu 1, msr 1260dd00 [ 0.200104] remote IPI: ok | [ 0.212098] local IPI: ok | [ 0.224078] -------------------- [ 0.224762] Good, all 2 testcases passed! | [ 0.225609] --------------------------------- [ 0.226474] Total of 2 processors activated (10773.32 BogoMIPS). [ 0.231586] devtmpfs: initialized [ 0.240043] xor: automatically using best checksumming function: [ 0.280044] avx : 114.000 MB/sec [ 0.281853] NET: Registered protocol family 16 [ 0.286094] ACPI: bus type pci registered [ 0.287611] dca service started, version 1.12.1 [ 0.288170] PCI: Using configuration type 1 for base access [ 0.391050] bio: create slab <bio-0> at 0 [ 0.460057] raid6: sse2x1 5969 MB/s [ 0.528046] raid6: sse2x2 7342 MB/s [ 0.596065] raid6: sse2x4 7409 MB/s [ 0.596786] raid6: using algorithm sse2x4 (7409 MB/s) [ 0.597709] raid6: using ssse3x2 recovery algorithm [ 0.599271] ACPI: Added _OSI(Module Device) [ 0.599785] ACPI: Added _OSI(Processor Device) [ 0.600061] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.600637] ACPI: Added _OSI(Processor Aggregator Device) [ 0.607125] ACPI: EC: Look up EC in DSDT [ 0.683723] ACPI: Interpreter enabled [ 0.684187] ACPI: (supports S0 S5) [ 0.684611] ACPI: Using IOAPIC for interrupt routing [ 0.755840] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.758642] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.765756] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.766818] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.767699] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.768058] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.769346] PCI host bridge to bus 0000:00 [ 0.769838] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.770541] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.772068] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.772850] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff] [ 0.773729] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.775295] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.776654] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.780330] pci 0000:00:01.1: reg 20: [io 0xc040-0xc04f] [ 0.782134] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.783333] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.784073] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.785087] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000 [ 0.788723] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref] [ 0.792738] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff] [ 0.800735] pci 0000:00:02.0: reg 30: [mem 0xfebe0000-0xfebeffff pref] [ 0.801795] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.804061] pci 0000:00:03.0: reg 10: [mem 0xfeba0000-0xfebbffff] [ 0.805702] pci 0000:00:03.0: reg 14: [io 0xc000-0xc03f] [ 0.811406] pci 0000:00:03.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.812274] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.813778] pci 0000:00:04.0: reg 10: [mem 0xfebf1000-0xfebf100f] [ 0.818319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.851008] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0e) [ 0.996136] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 1.000273] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 1.004488] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 1.008663] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 1.011159] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 1.014644] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.016157] vgaarb: loaded [ 1.016713] vgaarb: bridge control possible 0000:00:02.0 [ 1.024590] SCSI subsystem initialized [ 1.026729] libata version 3.00 loaded. [ 1.028501] ACPI: bus type usb registered [ 1.029920] usbcore: registered new interface driver usbfs [ 1.031212] usbcore: registered new interface driver hub [ 1.032772] usbcore: registered new device driver usb [ 1.038144] wmi: Mapper loaded [ 1.039441] PCI: Using ACPI for IRQ routing [ 1.040090] PCI: pci_cache_line_size set to 64 bytes [ 1.041824] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 1.042969] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff] [ 1.056607] irda_init() [ 1.057657] NET: Registered protocol family 23 [ 1.058637] Bluetooth: Core ver 2.16 [ 1.059562] NET: Registered protocol family 31 [ 1.060084] Bluetooth: HCI device and connection manager initialized [ 1.061257] Bluetooth: HCI socket layer initialized [ 1.062148] Bluetooth: L2CAP socket layer initialized [ 1.063187] Bluetooth: SCO socket layer initialized [ 1.064098] NET: Registered protocol family 8 [ 1.064890] NET: Registered protocol family 20 [ 1.069136] Switching to clocksource kvm-clock [ 1.071690] Warning: could not register all branches stats [ 1.072626] Warning: could not register annotated branches stats [ 1.311682] pnp: PnP ACPI init [ 1.312344] ACPI: bus type pnp registered [ 1.316869] pnp 00:00: [bus 00-ff] [ 1.317402] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.318037] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.318741] pnp 00:00: [io 0x0d00-0xffff window] [ 1.319462] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.320326] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 1.321712] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.323137] pnp 00:01: [io 0x0070-0x0071] [ 1.323846] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:3) [ 1.325141] pnp 00:01: [irq 8] [ 1.325621] pnp 00:01: [io 0x0072-0x0077] [ 1.326633] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.328206] pnp 00:02: [io 0x0060] [ 1.328775] pnp 00:02: [io 0x0064] [ 1.329342] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:3) [ 1.330547] pnp 00:02: [irq 1] [ 1.331382] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.332936] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:3) [ 1.334170] pnp 00:03: [irq 12] [ 1.335046] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 1.337077] pnp 00:04: [io 0x03f2-0x03f5] [ 1.337708] pnp 00:04: [io 0x03f7] [ 1.338273] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:3) [ 1.339483] pnp 00:04: [irq 6] [ 1.339965] pnp 00:04: [dma 2] [ 1.340879] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) [ 1.342828] pnp 00:05: [io 0x0378-0x037f] [ 1.343486] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:3) [ 1.344745] pnp 00:05: [irq 7] [ 1.345619] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active) [ 1.347591] pnp 00:06: [io 0x03f8-0x03ff] [ 1.348310] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:3) [ 1.349527] pnp 00:06: [irq 4] [ 1.350397] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.352471] pnp 00:07: [io 0x02f8-0x02ff] [ 1.353127] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:3) [ 1.354338] pnp 00:07: [irq 3] [ 1.355227] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.360661] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 1.361973] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.366922] pnp: PnP ACPI: found 9 devices [ 1.367554] ACPI: ACPI bus type pnp unregistered [ 1.378465] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.379299] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.380132] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.381011] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 1.382237] NET: Registered protocol family 2 [ 1.383286] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 1.385640] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 1.387654] TCP bind hash table entries: 16384 (order: 8, 1310720 bytes) [ 1.391148] TCP: Hash tables configured (established 16384 bind 16384) [ 1.392219] TCP: reno registered [ 1.392797] UDP hash table entries: 256 (order: 3, 49152 bytes) [ 1.393816] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes) [ 1.395305] NET: Registered protocol family 1 [ 1.395983] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.396931] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 1.397826] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 1.398810] pci 0000:00:02.0: Boot video device [ 1.399607] PCI: CLS 0 bytes, default 64 [ 1.401297] Unpacking initramfs... [ 3.349316] Freeing initrd memory: 23244k freed [ 3.366883] cryptomgr_test (24) used greatest stack depth: 6376 bytes left [ 3.381145] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 3.390126] Initializing RT-Tester: OK [ 3.402231] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 3.477624] VFS: Disk quotas dquot_6.5.2 [ 3.479340] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.490571] NTFS driver 2.1.30 [Flags: R/W DEBUG]. [ 3.509940] ROMFS MTD (C) 2007 Red Hat, Inc. [ 3.512520] QNX4 filesystem 0.2.3 registered. [ 3.514094] QNX6 filesystem 1.0.0 registered. [ 3.515329] fuse init (API version 7.19) [ 3.521929] JFS: nTxBlock = 2078, nTxLock = 16630 [ 3.533668] GFS2 installed [ 3.557937] NET: Registered protocol family 38 [ 3.558656] async_tx: api initialized (async) [ 3.560504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.561600] io scheduler noop registered [ 3.568154] io scheduler cfq registered (default) [ 3.568843] list_sort_test: start testing list_sort() [ 3.589523] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 3.593702] hgafb: HGA card not detected. [ 3.594393] hgafb: probe of hgafb.0 failed with error -22 [ 3.599638] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM (4096 kB) at 0xfc000000 [ 3.604412] usbcore: registered new interface driver udlfb [ 3.605493] usbcore: registered new interface driver smscufx [ 3.609101] kworker/u:0 (112) used greatest stack depth: 5384 bytes left [ 3.610278] uvesafb: failed to execute /sbin/v86d [ 3.610978] uvesafb: make sure that the v86d helper is installed and executable [ 3.612115] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 3.613087] uvesafb: vbe_init() failed with -22 [ 3.613815] uvesafb: probe of uvesafb.0 failed with error -22 [ 3.615943] intel_idle: does not run on family 6 model 60 [ 3.622090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 3.623201] ACPI: Power Button [PWRF] [ 3.636321] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 3.873579] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 3.874559] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 4.195189] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 4.203495] lp: driver loaded but no devices found [ 4.204453] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 4.205795] ac.o: No PCI boards found. [ 4.206483] ac.o: For an ISA board you must supply memory and irq parameters. [ 4.208536] Non-volatile memory driver v1.3 [ 4.212368] smapi::smapi_init, ERROR invalid usSmapiID [ 4.213288] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine [ 4.214921] mwave: mwavedd::mwave_init: Error: Failed to initialize board data [ 4.216333] mwave: mwavedd::mwave_init: Error: Failed to initialize [ 4.217539] [drm:drm_core_init] *ERROR* Cannot create /proc/dri [ 4.223524] i2c-core: driver [ch7006] using legacy suspend method [ 4.224473] i2c-core: driver [ch7006] using legacy resume method [ 4.226253] lkdtm: No crash points registered, enable through debugfs [ 4.227735] Phantom Linux Driver, version n0.9.8, init OK [ 4.236256] rdac: device handler registered [ 4.237230] hp_sw: device handler registered [ 4.237859] emc: device handler registered [ 4.238463] osst :I: Tape driver with OnStream support version 0.99.4 [ 4.238463] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 4.243834] osd: LOADED open-osd 0.2.1 [ 4.260658] Rounding down aligned max_sectors from 4294967295 to 8388600 [ 4.280969] mtdoops: mtd device (mtddev=name/number) must be supplied [ 4.282117] device id = 2440 [ 4.282605] device id = 2480 [ 4.283097] device id = 24c0 [ 4.283583] device id = 24d0 [ 4.284134] device id = 25a1 [ 4.284620] device id = 2670 [ 4.286157] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.287060] ------------[ cut here ]------------ [ 4.287722] kernel BUG at include/linux/mtd/map.h:148! [ 4.288048] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.288048] CPU 1 [ 4.288048] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00162-g49099c4 #17 Bochs Bochs [ 4.288048] RIP: 0010:[<ffffffff8177e8de>] [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.288048] RSP: 0018:ffff880011049e20 EFLAGS: 00010246 [ 4.288048] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 4.288048] RDX: ffff880011049e20 RSI: ffffffff82a23580 RDI: ffff880011049e80 [ 4.288048] RBP: ffff880011049e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 4.288048] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 4.288048] R13: ffffffff828790ce R14: 0000000000000000 R15: 0000000000000000 [ 4.288048] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 4.288048] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.288048] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000406e0 [ 4.288048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.288048] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.288048] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 4.288048] Stack: [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] Call Trace: [ 4.288048] [<ffffffff81779e05>] cfi_probe+0x15/0x17 [ 4.288048] [<ffffffff81779d9b>] do_map_probe+0xa0/0xac [ 4.288048] [<ffffffff834d1aac>] ? physmap_init+0x12/0x12 [ 4.288048] [<ffffffff834d1bb0>] init_sbc_gxx+0x104/0x15b [ 4.288048] [<ffffffff8348d1b3>] do_one_initcall+0x86/0x208 [ 4.288048] [<ffffffff8348d442>] kernel_init+0x10d/0x1c2 [ 4.288048] [<ffffffff8348c739>] ? do_early_param+0xc3/0xc3 [ 4.288048] [<ffffffff8207b2f4>] kernel_thread_helper+0x4/0x10 [ 4.288048] [<ffffffff820797b4>] ? retint_restore_args+0x13/0x13 [ 4.288048] [<ffffffff8348d335>] ? do_one_initcall+0x208/0x208 [ 4.288048] [<ffffffff8207b2f0>] ? gs_change+0x13/0x13 [ 4.288048] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 4.288048] RIP [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.288048] RSP <ffff880011049e20> [ 4.321423] ---[ end trace 169195d5d1f9be6e ]--- [ 4.322118] swapper/0 (1) used greatest stack depth: 3768 bytes left [ 4.323045] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 4.323045]
Elapsed time: 10
qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/vmlinuz-3.5.0-rc4-00162-g49099c4 -append 'hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:49099c4991da3c94773f888aea2e9d27b8a7c6d1:bisect-linux1/.vmlinuz-49099c4991da3c94773f888aea2e9d27b8a7c6d1-20140805164127-2-kbuild branch=linux-devel/devel-hourly-2014080511 BOOT_IMAGE=/kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/vmlinuz-3.5.0-rc4-00162-g49099c4 drbd.minor_count=8' -initrd /kernel-tests/initrd/quantal-core-x86_64.cgz -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-quantal-kbuild-15 -serial file:/dev/shm/kboot/serial-quantal-kbuild-15 -daemonize -display none -monitor null
HEAD is now at 7d5b323... 0day head guard for 'devel-hourly-2014080511'
git checkout 19583ca584d6f574384e17fe7613dfaeadcdc4a6
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:19583ca584d6f574384e17fe7613dfaeadcdc4a6:bisect-linux1
2014-08-05 12:44:45 19583ca584d6f574384e17fe7613dfaeadcdc4a6 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-19583ca584d6f574384e17fe7613dfaeadcdc4a6 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/19583ca584d6f574384e17fe7613dfaeadcdc4a6 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-19583ca584d6f574384e17fe7613dfaeadcdc4a6
kernel: /kernel/x86_64-randconfig-s0-08051229/19583ca584d6f574384e17fe7613dfaeadcdc4a6/vmlinuz-3.16.0
2014-08-05 12:46:46 detecting boot state . TEST FAILURE [ 9.382650] device id = 2670 [ 9.383960] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 9.384988] ------------[ cut here ]------------ [ 9.385639] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 9.386604] invalid opcode: 0000 [#1] PREEMPT SMP [ 9.387357] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0 #1 [ 9.388183] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 9.388855] task: ffff880012548000 ti: ffff880012544000 task.ti: ffff880012544000 [ 9.388855] RIP: 0010:[<ffffffff8d8668a9>] [<ffffffff8d8668a9>] mtd_do_chip_probe+0x1d/0x1f [ 9.388855] RSP: 0000:ffff880012547df0 EFLAGS: 00010286 [ 9.388855] RAX: 0000000000000000 RBX: ffffffff8fcab630 RCX: 0000000000000000 [ 9.388855] RDX: ffff880012547df0 RSI: ffffffff8fcab660 RDI: ffff880012547e50 [ 9.388855] RBP: ffff880012547e50 R08: 00000000be169693 R09: 0000000000000002 [ 9.388855] R10: 0000000000000000 R11: 0000000000000064 R12: ffffffff8fcac110 [ 9.388855] R13: ffffffff8ee5878d R14: 0000000000000000 R15: 0000000000000000 [ 9.388855] FS: 0000000000000000(0000) GS:ffff880013800000(0000) knlGS:0000000000000000 [ 9.388855] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 9.388855] CR2: 0000000000000000 CR3: 000000000ef8f000 CR4: 00000000000006f0 [ 9.388855] Stack: [ 9.388855] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 9.388855] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 9.388855] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 9.388855] Call Trace: [ 9.388855] [<ffffffff8d861dee>] cfi_probe+0x15/0x17 [ 9.388855] [<ffffffff8d861d87>] do_map_probe+0x9f/0xaa [ 9.388855] [<ffffffff90a27cdd>] ? physmap_init+0x14/0x14 [ 9.388855] [<ffffffff90a27de1>] init_sbc_gxx+0x104/0x15b [ 9.388855] [<ffffffff909c0790>] do_one_initcall+0x140/0x2b6 [ 9.388855] [<ffffffff8ced3800>] ? param_array_set+0x174/0x174 [ 9.388855] [<ffffffff8ced3c0e>] ? parse_args+0x366/0x48f [ 9.388855] [<ffffffff909c0a10>] kernel_init_freeable+0x10a/0x1cc [ 9.388855] [<ffffffff909bfab4>] ? initcall_blacklist+0xba/0xba [ 9.388855] [<ffffffff8e32bbda>] ? rest_init+0x15e/0x15e [ 9.388855] [<ffffffff8e32bbe8>] kernel_init+0xe/0x154 [ 9.388855] [<ffffffff8e3710bc>] ret_from_fork+0x7c/0xb0 [ 9.388855] [<ffffffff8e32bbda>] ? rest_init+0x15e/0x15e [ 9.388855] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 a0 ba ca 8f 48 89 e5 e8 cc ff [ 9.388855] RIP [<ffffffff8d8668a9>] mtd_do_chip_probe+0x1d/0x1f [ 9.388855] RSP <ffff880012547df0> [ 9.420863] ---[ end trace fcc426762a2dd468 ]--- [ 9.422714] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
/kernel/x86_64-randconfig-s0-08051229/19583ca584d6f574384e17fe7613dfaeadcdc4a6/dmesg-yocto-vp-38:20140805124700:x86_64-randconfig-s0-08051229:3.16.0:1 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 12:47:17 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit 19583ca584d6f574384e17fe7613dfaeadcdc4a6
git checkout v3.16
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:19583ca584d6f574384e17fe7613dfaeadcdc4a6:bisect-linux1
TEST FAILURE
[ 9.382650] device id = 2670 [ 9.383960] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 9.384988] ------------[ cut here ]------------ [ 9.385639] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 9.386604] invalid opcode: 0000 [#1] PREEMPT SMP [ 9.387357] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.16.0 #1 [ 9.388183] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 9.388855] task: ffff880012548000 ti: ffff880012544000 task.ti: ffff880012544000 [ 9.388855] RIP: 0010:[<ffffffff8d8668a9>] [<ffffffff8d8668a9>] mtd_do_chip_probe+0x1d/0x1f [ 9.388855] RSP: 0000:ffff880012547df0 EFLAGS: 00010286 [ 9.388855] RAX: 0000000000000000 RBX: ffffffff8fcab630 RCX: 0000000000000000 [ 9.388855] RDX: ffff880012547df0 RSI: ffffffff8fcab660 RDI: ffff880012547e50 [ 9.388855] RBP: ffff880012547e50 R08: 00000000be169693 R09: 0000000000000002 [ 9.388855] R10: 0000000000000000 R11: 0000000000000064 R12: ffffffff8fcac110 [ 9.388855] R13: ffffffff8ee5878d R14: 0000000000000000 R15: 0000000000000000 [ 9.388855] FS: 0000000000000000(0000) GS:ffff880013800000(0000) knlGS:0000000000000000 [ 9.388855] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 9.388855] CR2: 0000000000000000 CR3: 000000000ef8f000 CR4: 00000000000006f0 [ 9.388855] Stack: [ 9.388855] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 9.388855] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 9.388855] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 9.388855] Call Trace: [ 9.388855] [<ffffffff8d861dee>] cfi_probe+0x15/0x17 [ 9.388855] [<ffffffff8d861d87>] do_map_probe+0x9f/0xaa [ 9.388855] [<ffffffff90a27cdd>] ? physmap_init+0x14/0x14 [ 9.388855] [<ffffffff90a27de1>] init_sbc_gxx+0x104/0x15b [ 9.388855] [<ffffffff909c0790>] do_one_initcall+0x140/0x2b6 [ 9.388855] [<ffffffff8ced3800>] ? param_array_set+0x174/0x174 [ 9.388855] [<ffffffff8ced3c0e>] ? parse_args+0x366/0x48f [ 9.388855] [<ffffffff909c0a10>] kernel_init_freeable+0x10a/0x1cc [ 9.388855] [<ffffffff909bfab4>] ? initcall_blacklist+0xba/0xba [ 9.388855] [<ffffffff8e32bbda>] ? rest_init+0x15e/0x15e [ 9.388855] [<ffffffff8e32bbe8>] kernel_init+0xe/0x154 [ 9.388855] [<ffffffff8e3710bc>] ret_from_fork+0x7c/0xb0 [ 9.388855] [<ffffffff8e32bbda>] ? rest_init+0x15e/0x15e [ 9.388855] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 a0 ba ca 8f 48 89 e5 e8 cc ff [ 9.388855] RIP [<ffffffff8d8668a9>] mtd_do_chip_probe+0x1d/0x1f [ 9.388855] RSP <ffff880012547df0> [ 9.420863] ---[ end trace fcc426762a2dd468 ]--- [ 9.422714] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
/kernel/x86_64-randconfig-s0-08051229/19583ca584d6f574384e17fe7613dfaeadcdc4a6/dmesg-yocto-vp-38:20140805124700:x86_64-randconfig-s0-08051229:3.16.0:1 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 12:47:19 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.16
git checkout v3.15
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:1860e379875dfe7271c649058aeddffe5afd9d0d:bisect-linux1
2014-08-05 12:47:26 1860e379875dfe7271c649058aeddffe5afd9d0d compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-1860e379875dfe7271c649058aeddffe5afd9d0d Check for kernel in /kernel/x86_64-randconfig-s0-08051229/1860e379875dfe7271c649058aeddffe5afd9d0d
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-1860e379875dfe7271c649058aeddffe5afd9d0d waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-1860e379875dfe7271c649058aeddffe5afd9d0d
kernel: /kernel/x86_64-randconfig-s0-08051229/1860e379875dfe7271c649058aeddffe5afd9d0d/vmlinuz-3.15.0
2014-08-05 12:55:26 detecting boot state ...... TEST FAILURE [ 5.040725] device id = 2670 [ 5.041428] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 5.042013] ------------[ cut here ]------------ [ 5.042383] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 5.042994] invalid opcode: 0000 [#1] PREEMPT SMP [ 5.043448] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0 #1 [ 5.043947] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.044104] task: ffff880011078000 ti: ffff880011140000 task.ti: ffff880011140000 [ 5.044104] RIP: 0010:[<ffffffff88849068>] [<ffffffff88849068>] mtd_do_chip_probe+0x1d/0x1f [ 5.044104] RSP: 0000:ffff880011143df0 EFLAGS: 00010286 [ 5.044104] RAX: 0000000000000000 RBX: ffffffff8ac50c10 RCX: 0000000000000000 [ 5.044104] RDX: ffff880011143df0 RSI: ffffffff8ac50c40 RDI: ffff880011143e50 [ 5.044104] RBP: ffff880011143e50 R08: 00000000be169693 R09: 0000000000000002 [ 5.044104] R10: 0000000000000000 R11: 0000000000001064 R12: ffffffff8ac516d0 [ 5.044104] R13: ffffffff89e01785 R14: 0000000000000000 R15: 0000000000000000 [ 5.044104] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 5.044104] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5.044104] CR2: 0000000000000000 CR3: 0000000009f37000 CR4: 00000000000006e0 [ 5.044104] Stack: [ 5.044104] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.044104] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.044104] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.044104] Call Trace: [ 5.044104] [<ffffffff88844643>] cfi_probe+0x15/0x17 [ 5.044104] [<ffffffff888445dc>] do_map_probe+0x9f/0xaa [ 5.044104] [<ffffffff8b9af3ed>] ? physmap_init+0x14/0x14 [ 5.044104] [<ffffffff8b9af4f1>] init_sbc_gxx+0x104/0x15b [ 5.044104] [<ffffffff8b949563>] do_one_initcall+0x8b/0x1fa [ 5.044104] [<ffffffff87ed4100>] ? param_array_set+0x164/0x174 [ 5.044104] [<ffffffff87ed44e9>] ? parse_args+0x331/0x440 [ 5.044104] [<ffffffff8b9497dc>] kernel_init_freeable+0x10a/0x1cc [ 5.044104] [<ffffffff8b9489fa>] ? do_early_param+0xc1/0xc1 [ 5.044104] [<ffffffff892f9cfa>] ? rest_init+0x15e/0x15e [ 5.044104] [<ffffffff892f9d08>] kernel_init+0xe/0x154 [ 5.044104] [<ffffffff893403cc>] ret_from_fork+0x7c/0xb0 [ 5.044104] [<ffffffff892f9cfa>] ? rest_init+0x15e/0x15e [ 5.044104] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 60 10 c5 8a 48 89 e5 e8 cc ff [ 5.044104] RIP [<ffffffff88849068>] mtd_do_chip_probe+0x1d/0x1f [ 5.044104] RSP <ffff880011143df0> [ 5.062959] ---[ end trace 04c6a8ff27654120 ]--- [ 5.063417] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
/kernel/x86_64-randconfig-s0-08051229/1860e379875dfe7271c649058aeddffe5afd9d0d/dmesg-quantal-vp-26:20140805125754:x86_64-randconfig-s0-08051229:3.15.0:1 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 12:58:28 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.15
git checkout v3.14
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:455c6fdbd219161bd09b1165f11699d6d73de11c:bisect-linux1
2014-08-05 12:58:40 455c6fdbd219161bd09b1165f11699d6d73de11c compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-455c6fdbd219161bd09b1165f11699d6d73de11c Check for kernel in /kernel/x86_64-randconfig-s0-08051229/455c6fdbd219161bd09b1165f11699d6d73de11c waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-455c6fdbd219161bd09b1165f11699d6d73de11c
kernel: /kernel/x86_64-randconfig-s0-08051229/455c6fdbd219161bd09b1165f11699d6d73de11c/vmlinuz-3.14.0
2014-08-05 13:00:40 detecting boot state .... TEST FAILURE [ 4.991611] device id = 2670 [ 4.992403] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.992985] ------------[ cut here ]------------ [ 4.993394] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 4.994004] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.994470] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0 #2 [ 4.994988] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 4.995484] task: ffff880011078000 ti: ffff880011072000 task.ti: ffff880011072000 [ 4.996025] RIP: 0010:[<ffffffff8723f4c2>] [<ffffffff8723f4c2>] mtd_do_chip_probe+0x1d/0x1f [ 4.996025] RSP: 0000:ffff880011073df0 EFLAGS: 00010286 [ 4.996025] RAX: 0000000000000000 RBX: ffffffff895ed7b0 RCX: 0000000000000000 [ 4.996025] RDX: ffff880011073df0 RSI: ffffffff895ed7e0 RDI: ffff880011073e50 [ 4.996025] RBP: ffff880011073e50 R08: 00000000be169693 R09: 0000000000000002 [ 4.996025] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff895ee270 [ 4.996025] R13: ffffffff88798821 R14: 0000000000000000 R15: 0000000000000000 [ 4.996025] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 4.996025] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.996025] CR2: 0000000000000000 CR3: 00000000088c7000 CR4: 00000000000006f0 [ 4.996025] Stack: [ 4.996025] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.996025] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.996025] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.996025] Call Trace: [ 4.996025] [<ffffffff8723aa18>] cfi_probe+0x15/0x17 [ 4.996025] [<ffffffff8723a9b1>] do_map_probe+0x9f/0xaa [ 4.996025] [<ffffffff8a323c57>] ? physmap_init+0x14/0x14 [ 4.996025] [<ffffffff8a323d5b>] init_sbc_gxx+0x104/0x15b [ 4.996025] [<ffffffff8a2be563>] do_one_initcall+0x8b/0x1fa [ 4.996025] [<ffffffff868d3a00>] ? parameqn+0x51/0x84 [ 4.996025] [<ffffffff868d3d88>] ? parse_args+0x331/0x440 [ 4.996025] [<ffffffff8a2be7dc>] kernel_init_freeable+0x10a/0x1cc [ 4.996025] [<ffffffff8a2bd9fa>] ? do_early_param+0xc1/0xc1 [ 4.996025] [<ffffffff87cc9d3d>] ? rest_init+0x161/0x161 [ 4.996025] [<ffffffff87cc9d4b>] kernel_init+0xe/0x154 [ 4.996025] [<ffffffff87d0f0cc>] ret_from_fork+0x7c/0xb0 [ 4.996025] [<ffffffff87cc9d3d>] ? rest_init+0x161/0x161 [ 4.996025] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 00 dc 5e 89 48 89 e5 e8 cc ff [ 4.996025] RIP [<ffffffff8723f4c2>] mtd_do_chip_probe+0x1d/0x1f [ 4.996025] RSP <ffff880011073df0> [ 5.014843] ---[ end trace ed1c01546164a78a ]--- [ 5.015277] swapper/0 (1) used greatest stack depth: 4216 bytes left
/kernel/x86_64-randconfig-s0-08051229/455c6fdbd219161bd09b1165f11699d6d73de11c/dmesg-quantal-vp-16:20140805130138:x86_64-randconfig-s0-08051229:3.14.0:2 /kernel/x86_64-randconfig-s0-08051229/455c6fdbd219161bd09b1165f11699d6d73de11c/dmesg-quantal-vp-21:20140805130138:x86_64-randconfig-s0-08051229:3.14.0:2 /kernel/x86_64-randconfig-s0-08051229/455c6fdbd219161bd09b1165f11699d6d73de11c/dmesg-quantal-vp-3:20140805130138:x86_64-randconfig-s0-08051229:3.14.0:2 0:3:3 all_good:bad:all_bad boots
[1;35m2014-08-05 13:02:43 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.14
git checkout v3.13
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:d8ec26d7f8287f5788a494f56e8814210f0e64be:bisect-linux1
2014-08-05 13:02:47 d8ec26d7f8287f5788a494f56e8814210f0e64be compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-d8ec26d7f8287f5788a494f56e8814210f0e64be Check for kernel in /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-d8ec26d7f8287f5788a494f56e8814210f0e64be
kernel: /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/vmlinuz-3.13.0
2014-08-05 13:04:53 detecting boot state . TEST FAILURE [ 14.144673] device id = 2670 [ 14.145773] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 14.146578] ------------[ cut here ]------------ [ 14.147151] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 14.148086] invalid opcode: 0000 [#1] PREEMPT SMP [ 14.148195] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0 #3 [ 14.148195] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 14.148195] task: ffff880011058000 ti: ffff880011054000 task.ti: ffff880011054000 [ 14.148195] RIP: 0010:[<ffffffff819fa128>] [<ffffffff819fa128>] mtd_do_chip_probe+0x1d/0x1f [ 14.148195] RSP: 0000:ffff880011055df0 EFLAGS: 00010286 [ 14.148195] RAX: 0000000000000000 RBX: ffffffff83d30340 RCX: 0000000000000000 [ 14.148195] RDX: ffff880011055df0 RSI: ffffffff83d30370 RDI: ffff880011055e50 [ 14.148195] RBP: ffff880011055e50 R08: 00000000be169693 R09: 0000000000000002 [ 14.148195] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff83d30e00 [ 14.148195] R13: ffffffff82ee5703 R14: 0000000000000000 R15: 0000000000000000 [ 14.148195] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 14.148195] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 14.148195] CR2: 0000000000000000 CR3: 0000000002211000 CR4: 00000000000006f0 [ 14.148195] Stack: [ 14.148195] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 14.148195] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 14.148195] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 14.148195] Call Trace: [ 14.148195] [<ffffffff819f567e>] cfi_probe+0x15/0x17 [ 14.148195] [<ffffffff819f5617>] do_map_probe+0x9f/0xaa [ 14.148195] [<ffffffff84a39c1f>] ? physmap_init+0x14/0x14 [ 14.148195] [<ffffffff84a39d23>] init_sbc_gxx+0x104/0x15b [ 14.148195] [<ffffffff849d5542>] do_one_initcall+0x8b/0x1fa [ 14.148195] [<ffffffff84a1301f>] ? init_nls_iso8859_15+0x12/0x12 [ 14.148195] [<ffffffff849d57bb>] kernel_init_freeable+0x10a/0x1cc [ 14.148195] [<ffffffff849d49f4>] ? do_early_param+0xc1/0xc1 [ 14.148195] [<ffffffff8245039d>] ? rest_init+0x161/0x161 [ 14.148195] [<ffffffff824503ab>] kernel_init+0xe/0x17e [ 14.148195] [<ffffffff8249e68c>] ret_from_fork+0x7c/0xb0 [ 14.148195] [<ffffffff8245039d>] ? rest_init+0x161/0x161 [ 14.148195] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 90 07 d3 83 48 89 e5 e8 cc ff [ 14.172044] RIP [<ffffffff819fa128>] mtd_do_chip_probe+0x1d/0x1f [ 14.172044] RSP <ffff880011055df0> [ 14.176680] ---[ end trace ecf73ea16074d281 ]--- [ 14.177288] swapper/0 (1) used greatest stack depth: 4152 bytes left
/kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-15:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-25:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-27:20140805130450:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-28:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-43:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-44:20140805130450:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-56:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-59:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-6:20140805130450:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-9:20140805130453:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-12:20140805130501:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-23:20140805130501:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-30:20140805130500:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-6:20140805130500:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-24:20140805130500:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-58:20140805130500:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-yocto-vp-63:20140805130500:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-32:20140805130501:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-4:20140805130501:x86_64-randconfig-s0-08051229:3.13.0:3 /kernel/x86_64-randconfig-s0-08051229/d8ec26d7f8287f5788a494f56e8814210f0e64be/dmesg-quantal-vp-28:20140805130501:x86_64-randconfig-s0-08051229:3.13.0:3 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 13:05:24 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.13
git checkout v3.12
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52:bisect-linux1
2014-08-05 13:05:31 5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52
kernel: /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/vmlinuz-3.12.0
2014-08-05 13:12:31 detecting boot state ... TEST FAILURE [ 5.044293] device id = 2670 [ 5.045778] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 5.046446] ------------[ cut here ]------------ [ 5.046911] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 5.047602] invalid opcode: 0000 [#1] PREEMPT SMP [ 5.048139] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.12.0 #2 [ 5.048176] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.048176] task: ffff880011108000 ti: ffff880011110000 task.ti: ffff880011110000 [ 5.048176] RIP: 0010:[<ffffffff819bebc6>] [<ffffffff819bebc6>] mtd_do_chip_probe+0x1d/0x1f [ 5.048176] RSP: 0000:ffff880011111df0 EFLAGS: 00010286 [ 5.048176] RAX: 0000000000000000 RBX: ffffffff836743e0 RCX: 0000000000000000 [ 5.048176] RDX: ffff880011111df0 RSI: ffffffff83674410 RDI: ffff880011111e50 [ 5.048176] RBP: ffff880011111e50 R08: 0000000000000002 R09: 00000000be195ee1 [ 5.048176] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff83674ea0 [ 5.048176] R13: ffffffff82e4fa2e R14: 0000000000000000 R15: 0000000000000000 [ 5.048176] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 5.048176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.048176] CR2: 0000000000000000 CR3: 0000000002176000 CR4: 00000000000406e0 [ 5.048176] Stack: [ 5.048176] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.048176] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.048176] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.048176] Call Trace: [ 5.048176] [<ffffffff819ba11c>] cfi_probe+0x15/0x17 [ 5.048176] [<ffffffff819ba0b5>] do_map_probe+0x9f/0xaa [ 5.048176] [<ffffffff84346696>] ? physmap_init+0x14/0x14 [ 5.048176] [<ffffffff8434679a>] init_sbc_gxx+0x104/0x15b [ 5.048176] [<ffffffff842e449d>] do_one_initcall+0x8b/0x1f7 [ 5.048176] [<ffffffff810d1700>] ? parameqn+0x2/0x84 [ 5.048176] [<ffffffff810d1ad7>] ? parse_args+0x331/0x440 [ 5.048176] [<ffffffff842e4713>] kernel_init_freeable+0x10a/0x1cc [ 5.048176] [<ffffffff842e397a>] ? do_early_param+0xc1/0xc1 [ 5.048176] [<ffffffff823f47e7>] ? rest_init+0x16b/0x16b [ 5.048176] [<ffffffff823f47f5>] kernel_init+0xe/0x148 [ 5.048176] [<ffffffff82442f8c>] ret_from_fork+0x7c/0xb0 [ 5.048176] [<ffffffff823f47e7>] ? rest_init+0x16b/0x16b [ 5.048176] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 30 48 67 83 48 89 e5 e8 cc ff [ 5.048176] RIP [<ffffffff819bebc6>] mtd_do_chip_probe+0x1d/0x1f [ 5.048176] RSP <ffff880011111df0> [ 5.071465] ---[ end trace faf2f19575ed443e ]--- [ 5.071962] swapper/0 (1) used greatest stack depth: 4144 bytes left
/kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-quantal-kbuild-32:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-12:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-13:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-1:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-20:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-21:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-22:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-24:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-26:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-27:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-28:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-2:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-30:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-31:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 /kernel/x86_64-randconfig-s0-08051229/5e01dc7b26d9f24f39abace5da98ccbd6a5ceb52/dmesg-yocto-kbuild-5:20140805131117:x86_64-randconfig-s0-08051229:3.12.0:2 0:15:15 all_good:bad:all_bad boots
[1;35m2014-08-05 13:14:02 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.12
git checkout v3.11
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:6e4664525b1db28f8c4e1130957f70a94c19213e:bisect-linux1
2014-08-05 13:14:06 6e4664525b1db28f8c4e1130957f70a94c19213e compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-6e4664525b1db28f8c4e1130957f70a94c19213e Check for kernel in /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-6e4664525b1db28f8c4e1130957f70a94c19213e waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-6e4664525b1db28f8c4e1130957f70a94c19213e
kernel: /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/vmlinuz-3.11.0
2014-08-05 13:24:06 detecting boot state ....... TEST FAILURE [ 3.508802] device id = 2670 [ 3.509726] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 3.510357] ------------[ cut here ]------------ [ 3.510821] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 3.511482] invalid opcode: 0000 [#1] PREEMPT SMP [ 3.512002] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0 #3 [ 3.512094] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 3.512094] task: ffff880011108000 ti: ffff88001103a000 task.ti: ffff88001103a000 [ 3.512094] RIP: 0010:[<ffffffff819a5c91>] [<ffffffff819a5c91>] mtd_do_chip_probe+0x1d/0x1f [ 3.512094] RSP: 0000:ffff88001103bdf0 EFLAGS: 00010286 [ 3.512094] RAX: 0000000000000000 RBX: ffffffff835ff970 RCX: 0000000000000000 [ 3.512094] RDX: ffff88001103bdf0 RSI: ffffffff835ff9a0 RDI: ffff88001103be50 [ 3.512094] RBP: ffff88001103be50 R08: 0000000000000006 R09: 00000000be195ee1 [ 3.512094] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff83600430 [ 3.512094] R13: ffffffff82de10d7 R14: 0000000000000000 R15: 0000000000000000 [ 3.512094] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 3.512094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.512094] CR2: 0000000000000000 CR3: 0000000002f05000 CR4: 00000000000406f0 [ 3.512094] Stack: [ 3.512094] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.512094] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.512094] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.512094] Call Trace: [ 3.512094] [<ffffffff819a11f9>] cfi_probe+0x15/0x17 [ 3.512094] [<ffffffff819a1192>] do_map_probe+0x9f/0xaa [ 3.512094] [<ffffffff842a876d>] ? physmap_init+0x14/0x14 [ 3.512094] [<ffffffff842a8871>] init_sbc_gxx+0x104/0x15b [ 3.512094] [<ffffffff84246498>] do_one_initcall+0x8b/0x1f7 [ 3.512094] [<ffffffff810cfd00>] ? parameqn+0x8/0x84 [ 3.512094] [<ffffffff810d00e0>] ? parse_args+0x340/0x44f [ 3.512094] [<ffffffff8424670e>] kernel_init_freeable+0x10a/0x1c7 [ 3.512094] [<ffffffff8424597a>] ? do_early_param+0xc1/0xc1 [ 3.512094] [<ffffffff823b01b7>] ? rest_init+0x16b/0x16b [ 3.512094] [<ffffffff823b01c5>] kernel_init+0xe/0x148 [ 3.512094] [<ffffffff823fb67c>] ret_from_fork+0x7c/0xb0 [ 3.512094] [<ffffffff823b01b7>] ? rest_init+0x16b/0x16b [ 3.512094] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 c0 fd 5f 83 48 89 e5 e8 cc ff [ 3.512094] RIP [<ffffffff819a5c91>] mtd_do_chip_probe+0x1d/0x1f [ 3.512094] RSP <ffff88001103bdf0> [ 3.534748] ---[ end trace 380d43437ebe9e4c ]--- [ 3.535233] swapper/0 (1) used greatest stack depth: 4192 bytes left
/kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-24:20140805132442:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-28:20140805132442:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-30:20140805132438:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-4:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-8:20140805132442:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-11:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-15:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-18:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-20:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-21:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-quantal-kbuild-25:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 /kernel/x86_64-randconfig-s0-08051229/6e4664525b1db28f8c4e1130957f70a94c19213e/dmesg-yocto-kbuild-8:20140805132443:x86_64-randconfig-s0-08051229:3.11.0:3 0:12:12 all_good:bad:all_bad boots
[1;35m2014-08-05 13:27:37 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.11
git checkout v3.10
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:8bb495e3f02401ee6f76d1b1d77f3ac9f079e376:bisect-linux1
2014-08-05 13:28:01 8bb495e3f02401ee6f76d1b1d77f3ac9f079e376 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-8bb495e3f02401ee6f76d1b1d77f3ac9f079e376 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-8bb495e3f02401ee6f76d1b1d77f3ac9f079e376 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-8bb495e3f02401ee6f76d1b1d77f3ac9f079e376
kernel: /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/vmlinuz-3.10.0
2014-08-05 13:38:01 detecting boot state . TEST FAILURE [ 3.250961] device id = 2670 [ 3.252509] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 3.253167] ------------[ cut here ]------------ [ 3.253645] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 3.254325] invalid opcode: 0000 [#1] PREEMPT SMP [ 3.254866] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #4 [ 3.255448] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 3.256007] task: ffff880011050000 ti: ffff880011042000 task.ti: ffff880011042000 [ 3.256030] RIP: 0010:[<ffffffff81999be5>] [<ffffffff81999be5>] mtd_do_chip_probe+0x1d/0x1f [ 3.256030] RSP: 0000:ffff880011043e30 EFLAGS: 00010286 [ 3.256030] RAX: 0000000000000000 RBX: ffffffff83586400 RCX: 0000000000000000 [ 3.256030] RDX: ffff880011043e30 RSI: ffffffff83586430 RDI: ffff880011043e90 [ 3.256030] RBP: ffff880011043e90 R08: 0000000000000002 R09: ffffffff8110c16e [ 3.256030] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff83586ec0 [ 3.256030] R13: ffffffff82d7d878 R14: 0000000000000000 R15: 0000000000000000 [ 3.256030] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 3.256030] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.256030] CR2: 0000000000000000 CR3: 0000000002e9f000 CR4: 00000000000406e0 [ 3.256030] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.256030] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3.256030] Stack: [ 3.256030] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.256030] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.256030] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.256030] Call Trace: [ 3.256030] [<ffffffff8199514d>] cfi_probe+0x15/0x17 [ 3.256030] [<ffffffff819950e6>] do_map_probe+0x9f/0xaa [ 3.256030] [<ffffffff842012bc>] ? physmap_init+0x12/0x12 [ 3.256030] [<ffffffff842013c0>] init_sbc_gxx+0x104/0x15b [ 3.256030] [<ffffffff841a144c>] do_one_initcall+0x87/0x1fe [ 3.256030] [<ffffffff841a16cd>] kernel_init_freeable+0x10a/0x1c7 [ 3.256030] [<ffffffff841a0932>] ? do_early_param+0xc1/0xc1 [ 3.256030] [<ffffffff8237d0c7>] ? rest_init+0x16b/0x16b [ 3.256030] [<ffffffff8237d0d5>] kernel_init+0xe/0x148 [ 3.256030] [<ffffffff823c5dfc>] ret_from_fork+0x7c/0xb0 [ 3.256030] [<ffffffff8237d0c7>] ? rest_init+0x16b/0x16b [ 3.256030] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 50 68 58 83 48 89 e5 e8 cc ff [ 3.256030] RIP [<ffffffff81999be5>] mtd_do_chip_probe+0x1d/0x1f [ 3.256030] RSP <ffff880011043e30> [ 3.281452] ---[ end trace 96064d9dac73e5c4 ]--- [ 3.282209] swapper/0 (1) used greatest stack depth: 4256 bytes left
/kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-quantal-kbuild-10:20140805133519:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-quantal-kbuild-17:20140805133518:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-quantal-kbuild-18:20140805133519:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-quantal-kbuild-25:20140805133519:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-quantal-kbuild-4:20140805133519:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-14:20140805133752:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-19:20140805133746:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-26:20140805133746:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-27:20140805133752:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-30:20140805133747:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-33:20140805133748:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-36:20140805133747:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-37:20140805133747:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-3:20140805133747:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-41:20140805133746:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-51:20140805133747:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-56:20140805133748:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-5:20140805133746:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-7:20140805133747:x86_64-randconfig-s0-08051229:3.10.0:4 /kernel/x86_64-randconfig-s0-08051229/8bb495e3f02401ee6f76d1b1d77f3ac9f079e376/dmesg-yocto-vp-8:20140805133746:x86_64-randconfig-s0-08051229:3.10.0:4 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 13:38:33 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.10
git checkout v3.9
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1:bisect-linux1
2014-08-05 13:38:37 c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1
kernel: /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/vmlinuz-3.9.0
2014-08-05 13:40:37 detecting boot state . TEST FAILURE [ 3.275704] device id = 2670 [ 3.277149] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 3.277784] ------------[ cut here ]------------ [ 3.278242] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 3.278909] invalid opcode: 0000 [#1] PREEMPT SMP [ 3.279454] CPU 0 [ 3.279654] Pid: 1, comm: swapper/0 Not tainted 3.9.0 #4 Bochs Bochs [ 3.280044] RIP: 0010:[<ffffffff8196e064>] [<ffffffff8196e064>] mtd_do_chip_probe+0x1d/0x1f [ 3.280044] RSP: 0000:ffff880011045e30 EFLAGS: 00010286 [ 3.280044] RAX: 0000000000000000 RBX: ffffffff834a11d0 RCX: 0000000000000000 [ 3.280044] RDX: ffff880011045e30 RSI: ffffffff834a1200 RDI: ffff880011045e90 [ 3.280044] RBP: ffff880011045e90 R08: 0000000000000006 R09: ffffffff810fc931 [ 3.280044] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff834a1ce0 [ 3.280044] R13: ffffffff82ca274c R14: 0000000000000000 R15: 0000000000000000 [ 3.280044] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 3.280044] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.280044] CR2: 0000000000000000 CR3: 0000000002dbb000 CR4: 00000000000406f0 [ 3.280044] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.280044] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3.280044] Process swapper/0 (pid: 1, threadinfo ffff880011044000, task ffff880011048000) [ 3.280044] Stack: [ 3.280044] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.280044] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.280044] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.280044] Call Trace: [ 3.280044] [<ffffffff81969569>] cfi_probe+0x15/0x17 [ 3.280044] [<ffffffff81969502>] do_map_probe+0x9f/0xaa [ 3.280044] [<ffffffff840c1ce7>] ? physmap_init+0x12/0x12 [ 3.280044] [<ffffffff840c1deb>] init_sbc_gxx+0x104/0x15b [ 3.280044] [<ffffffff840753f3>] do_one_initcall+0x86/0x208 [ 3.280044] [<ffffffff8407567f>] kernel_init_freeable+0x10a/0x1c7 [ 3.280044] [<ffffffff8407494e>] ? do_early_param+0xc1/0xc1 [ 3.280044] [<ffffffff822f16d2>] ? rest_init+0x166/0x166 [ 3.280044] [<ffffffff822f16e0>] kernel_init+0xe/0x148 [ 3.280044] [<ffffffff82338a7c>] ret_from_fork+0x7c/0xb0 [ 3.280044] [<ffffffff822f16d2>] ? rest_init+0x166/0x166 [ 3.280044] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 20 16 4a 83 48 89 e5 e8 cc ff [ 3.280044] RIP [<ffffffff8196e064>] mtd_do_chip_probe+0x1d/0x1f [ 3.280044] RSP <ffff880011045e30> [ 3.302328] ---[ end trace eb309e9fa1b42531 ]--- [ 3.302793] swapper/0 (1) used greatest stack depth: 4304 bytes left
/kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-quantal-kbuild-17:20140805133801:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-quantal-kbuild-10:20140805133810:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-quantal-kbuild-18:20140805133801:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-quantal-kbuild-25:20140805133801:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-quantal-kbuild-4:20140805133801:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-12:20140805134041:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-14:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-20:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-26:20140805134041:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-27:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-30:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-39:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-40:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-44:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-47:20140805134047:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-48:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-55:20140805134041:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-58:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-61:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 /kernel/x86_64-randconfig-s0-08051229/c1be5a5b1b355d40e6cf79cc979eb66dafa24ad1/dmesg-yocto-vp-7:20140805134046:x86_64-randconfig-s0-08051229:3.9.0:4 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 13:41:08 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.9
git checkout v3.8
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:19f949f52599ba7c3f67a5897ac6be14bfcb1200:bisect-linux1
2014-08-05 13:41:10 19f949f52599ba7c3f67a5897ac6be14bfcb1200 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-19f949f52599ba7c3f67a5897ac6be14bfcb1200 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-19f949f52599ba7c3f67a5897ac6be14bfcb1200
kernel: /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/vmlinuz-3.8.0
2014-08-05 13:43:21 detecting boot state . TEST FAILURE [ 7.103154] device id = 2670 [ 7.104206] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 7.105110] ------------[ cut here ]------------ [ 7.105798] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 7.106814] invalid opcode: 0000 [#1] PREEMPT SMP [ 7.107604] CPU 0 [ 7.107894] Pid: 1, comm: swapper/0 Not tainted 3.8.0 #5 Bochs Bochs [ 7.108033] RIP: 0010:[<ffffffff8182a049>] [<ffffffff8182a049>] mtd_do_chip_probe+0x1d/0x1f [ 7.108033] RSP: 0000:ffff880012417e30 EFLAGS: 00010286 [ 7.108033] RAX: 0000000000000000 RBX: ffffffff82b20650 RCX: 0000000000000000 [ 7.108033] RDX: ffff880012417e30 RSI: ffffffff82b20680 RDI: ffff880012417e90 [ 7.108033] RBP: ffff880012417e90 R08: 000000000000015e R09: ffffffff810f8f94 [ 7.108033] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82b21160 [ 7.108033] R13: ffffffff829668e7 R14: 0000000000000000 R15: 0000000000000000 [ 7.108033] FS: 0000000000000000(0000) GS:ffff880013a00000(0000) knlGS:0000000000000000 [ 7.108033] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7.108033] CR2: 0000000000000000 CR3: 0000000002a6a000 CR4: 00000000000006f0 [ 7.108033] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.108033] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 7.108033] Process swapper/0 (pid: 1, threadinfo ffff880012416000, task ffff880012448000) [ 7.108033] Stack: [ 7.108033] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.108033] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.108033] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.108033] Call Trace: [ 7.108033] [<ffffffff818255e9>] cfi_probe+0x15/0x17 [ 7.108033] [<ffffffff81825582>] do_map_probe+0x9f/0xaa [ 7.108033] [<ffffffff8360b33b>] ? physmap_init+0x12/0x12 [ 7.108033] [<ffffffff8360b43f>] init_sbc_gxx+0x104/0x15b [ 7.108033] [<ffffffff835c41b3>] do_one_initcall+0x86/0x208 [ 7.108033] [<ffffffff835c443f>] kernel_init_freeable+0x10a/0x1c2 [ 7.108033] [<ffffffff835c3735>] ? do_early_param+0xc1/0xc1 [ 7.108033] [<ffffffff820bd972>] ? rest_init+0x166/0x166 [ 7.108033] [<ffffffff820bd980>] kernel_init+0xe/0x148 [ 7.108033] [<ffffffff820f71bc>] ret_from_fork+0x7c/0xb0 [ 7.108033] [<ffffffff820bd972>] ? rest_init+0x166/0x166 [ 7.108033] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 a0 0a b2 82 48 89 e5 e8 cc ff [ 7.108033] RIP [<ffffffff8182a049>] mtd_do_chip_probe+0x1d/0x1f [ 7.108033] RSP <ffff880012417e30> [ 7.148055] ---[ end trace 51f28a1787580ec1 ]--- [ 7.148779] swapper/0 (1) used greatest stack depth: 4272 bytes left
/kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-15:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-18:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-1:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-21:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-22:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-23:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-24:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-26:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-34:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-38:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-39:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-42:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-43:20140805134245:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-44:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-49:20140805134245:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-4:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-51:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-58:20140805134246:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-37:20140805134253:x86_64-randconfig-s0-08051229:3.8.0:5 /kernel/x86_64-randconfig-s0-08051229/19f949f52599ba7c3f67a5897ac6be14bfcb1200/dmesg-yocto-vp-3:20140805134253:x86_64-randconfig-s0-08051229:3.8.0:5 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 13:44:18 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.8
git checkout v3.7
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:29594404d7fe73cd80eaa4ee8c43dcc53970c60e:bisect-linux1
2014-08-05 13:49:51 29594404d7fe73cd80eaa4ee8c43dcc53970c60e compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-29594404d7fe73cd80eaa4ee8c43dcc53970c60e Check for kernel in /kernel/x86_64-randconfig-s0-08051229/29594404d7fe73cd80eaa4ee8c43dcc53970c60e
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-29594404d7fe73cd80eaa4ee8c43dcc53970c60e waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-29594404d7fe73cd80eaa4ee8c43dcc53970c60e
kernel: /kernel/x86_64-randconfig-s0-08051229/29594404d7fe73cd80eaa4ee8c43dcc53970c60e/vmlinuz-3.7.0
2014-08-05 14:09:51 detecting boot state ....... TEST FAILURE [ 7.020664] device id = 2670 [ 7.021633] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 7.022442] ------------[ cut here ]------------ [ 7.023055] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 7.023953] invalid opcode: 0000 [#1] PREEMPT SMP [ 7.024159] CPU 0 [ 7.024159] Pid: 1, comm: swapper/0 Not tainted 3.7.0 #5 Bochs Bochs [ 7.024159] RIP: 0010:[<ffffffff817c1f49>] [<ffffffff817c1f49>] mtd_do_chip_probe+0x1d/0x1f [ 7.024159] RSP: 0000:ffff880012417e40 EFLAGS: 00010282 [ 7.024159] RAX: 0000000000000000 RBX: ffffffff82a6d4d0 RCX: 0000000000000000 [ 7.024159] RDX: ffff880012417e40 RSI: ffffffff82a6d500 RDI: ffff880012417ea0 [ 7.024159] RBP: ffff880012417ea0 R08: 0000000000000003 R09: ffffffff810eff3a [ 7.024159] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a6de30 [ 7.024159] R13: ffffffff828bac5e R14: 0000000000000000 R15: 0000000000000000 [ 7.024159] FS: 0000000000000000(0000) GS:ffff880013a00000(0000) knlGS:0000000000000000 [ 7.024159] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7.024159] CR2: 0000000000000000 CR3: 00000000029c2000 CR4: 00000000000006f0 [ 7.024159] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.024159] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 7.024159] Process swapper/0 (pid: 1, threadinfo ffff880012416000, task ffff880012440000) [ 7.024159] Stack: [ 7.024159] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.024159] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.024159] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.024159] Call Trace: [ 7.024159] [<ffffffff817bd4e9>] cfi_probe+0x15/0x17 [ 7.024159] [<ffffffff817bd482>] do_map_probe+0x9f/0xaa [ 7.024159] [<ffffffff835280bf>] ? physmap_init+0x12/0x12 [ 7.024159] [<ffffffff835281c3>] init_sbc_gxx+0x104/0x15b [ 7.024159] [<ffffffff834e21a5>] do_one_initcall+0x86/0x208 [ 7.024159] [<ffffffff81fbdee1>] kernel_init+0x10f/0x316 [ 7.024159] [<ffffffff834e1735>] ? do_early_param+0xc1/0xc1 [ 7.024159] [<ffffffff81fbddd2>] ? rest_init+0x166/0x166 [ 7.024159] [<ffffffff8208c13c>] ret_from_fork+0x7c/0xb0 [ 7.024159] [<ffffffff81fbddd2>] ? rest_init+0x166/0x166 [ 7.024159] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 1f 44 00 00 55 31 c0 b9 18 00 00 00 48 89 e5 48 83 ec 60 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 0f 1f 44 00 00 55 48 c7 c6 20 d9 a6 82 48 89 e5 e8 cc ff [ 7.024159] RIP [<ffffffff817c1f49>] mtd_do_chip_probe+0x1d/0x1f [ 7.024159] RSP <ffff880012417e40> [ 7.056046] ---[ end trace ad213900e46a8ac5 ]--- [ 7.056683] swapper/0 (1) used greatest stack depth: 4288 bytes left
/kernel/x86_64-randconfig-s0-08051229/29594404d7fe73cd80eaa4ee8c43dcc53970c60e/dmesg-yocto-vp-56:20140805141300:x86_64-randconfig-s0-08051229:3.7.0:5 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 14:13:22 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.7
git checkout v3.6
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:a0d271cbfed1dd50278c6b06bead3d00ba0a88f9:bisect-linux1
2014-08-05 14:13:27 a0d271cbfed1dd50278c6b06bead3d00ba0a88f9 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-a0d271cbfed1dd50278c6b06bead3d00ba0a88f9 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-a0d271cbfed1dd50278c6b06bead3d00ba0a88f9
kernel: /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/vmlinuz-3.6.0
2014-08-05 14:15:27 detecting boot state ............ TEST FAILURE [ 7.332665] device id = 2670 [ 7.333343] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 7.333929] ------------[ cut here ]------------ [ 7.334358] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 7.335305] invalid opcode: 0000 [#1] PREEMPT SMP [ 7.336028] CPU 0 [ 7.336028] Pid: 1, comm: swapper/0 Not tainted 3.6.0 #6 Bochs Bochs [ 7.336028] RIP: 0010:[<ffffffff81790752>] [<ffffffff81790752>] mtd_do_chip_probe+0x1d/0x1f [ 7.336028] RSP: 0018:ffff880012417e38 EFLAGS: 00010246 [ 7.336028] RAX: 0000000000000000 RBX: ffffffff82a2a150 RCX: 0000000000000000 [ 7.336028] RDX: ffff880012417e38 RSI: ffffffff82a2a180 RDI: ffff880012417e98 [ 7.336028] RBP: ffff880012417e98 R08: 0000000000000003 R09: ffffffff810e4138 [ 7.336028] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a2aab0 [ 7.336028] R13: ffffffff8287f274 R14: 0000000000000000 R15: 0000000000000000 [ 7.336028] FS: 0000000000000000(0000) GS:ffff880013a00000(0000) knlGS:0000000000000000 [ 7.336028] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7.336028] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000006f0 [ 7.336028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7.336028] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 7.336028] Process swapper/0 (pid: 1, threadinfo ffff880012416000, task ffff880012418000) [ 7.336028] Stack: [ 7.336028] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.336028] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.336028] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7.336028] Call Trace: [ 7.336028] [<ffffffff8178bce1>] cfi_probe+0x15/0x17 [ 7.336028] [<ffffffff8178bc7a>] do_map_probe+0x9f/0xaa [ 7.336028] [<ffffffff834dff05>] ? physmap_init+0x12/0x12 [ 7.336028] [<ffffffff834e0009>] init_sbc_gxx+0x104/0x15b [ 7.336028] [<ffffffff8349b1aa>] do_one_initcall+0x86/0x208 [ 7.336028] [<ffffffff8349b436>] kernel_init+0x10a/0x1bf [ 7.336028] [<ffffffff8349a735>] ? do_early_param+0xc1/0xc1 [ 7.336028] [<ffffffff8206edc4>] kernel_thread_helper+0x4/0x10 [ 7.336028] [<ffffffff8206d374>] ? retint_restore_args+0x13/0x13 [ 7.336028] [<ffffffff8349b32c>] ? do_one_initcall+0x208/0x208 [ 7.336028] [<ffffffff8206edc0>] ? gs_change+0x13/0x13 [ 7.336028] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 0f 1f 44 00 00 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 0f 1f 44 00 00 48 c7 c6 a0 a5 a2 82 e8 cc ff [ 7.336028] RIP [<ffffffff81790752>] mtd_do_chip_probe+0x1d/0x1f [ 7.336028] RSP <ffff880012417e38> [ 7.359552] ---[ end trace 87b834dd1ef7a799 ]--- [ 7.359990] swapper/0 (1) used greatest stack depth: 4224 bytes left
/kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-22:20140805141944:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-23:20140805141944:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-29:20140805141944:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-50:20140805141945:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-54:20140805141945:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-55:20140805141945:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-61:20140805141945:x86_64-randconfig-s0-08051229:3.6.0:6 /kernel/x86_64-randconfig-s0-08051229/a0d271cbfed1dd50278c6b06bead3d00ba0a88f9/dmesg-yocto-vp-62:20140805141945:x86_64-randconfig-s0-08051229:3.6.0:6 0:8:8 all_good:bad:all_bad boots
[1;35m2014-08-05 14:21:47 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
bisect: bad commit v3.6
git checkout v3.5
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:28a33cbc24e4256c143dce96c7d93bf423229f92:bisect-linux1
2014-08-05 14:21:51 28a33cbc24e4256c143dce96c7d93bf423229f92 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-28a33cbc24e4256c143dce96c7d93bf423229f92 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/28a33cbc24e4256c143dce96c7d93bf423229f92
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-28a33cbc24e4256c143dce96c7d93bf423229f92 waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/x86_64-randconfig-s0-08051229-28a33cbc24e4256c143dce96c7d93bf423229f92
kernel: /kernel/x86_64-randconfig-s0-08051229/28a33cbc24e4256c143dce96c7d93bf423229f92/vmlinuz-3.5.0
2014-08-05 14:25:51 detecting boot state ........... 1................ 7 12 20 SUCCESS
bisect: good commit v3.5
git bisect start v3.6 v3.5 --
/c/kernel-tests/linear-bisect: ["-b", "v3.6", "-g", "v3.5", "/c/kernel-tests/bisect-test-boot-failure.sh", "/c/boot-bisect/linux1/obj-bisect"]
Bisecting: 11130 revisions left to test after this (roughly 14 steps)
[1dd8372d350583b0acc8d7cfd7a1dee05e1942dc] MAINTAINERS: update address for Dan Williams
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:1dd8372d350583b0acc8d7cfd7a1dee05e1942dc:bisect-linux1
2014-08-05 14:41:30 1dd8372d350583b0acc8d7cfd7a1dee05e1942dc compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-1dd8372d350583b0acc8d7cfd7a1dee05e1942dc Check for kernel in /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-1dd8372d350583b0acc8d7cfd7a1dee05e1942dc waiting for completion of /kbuild-tests/build-queue/snb-smoke/x86_64-randconfig-s0-08051229-1dd8372d350583b0acc8d7cfd7a1dee05e1942dc
kernel: /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/vmlinuz-3.6.0-rc1-00378-g1dd8372
2014-08-05 14:50:30 detecting boot state . TEST FAILURE [ 3.434367] device id = 2670 [ 3.435642] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 3.436283] ------------[ cut here ]------------ [ 3.436727] kernel BUG at /kbuild/src/smoke/include/linux/mtd/map.h:148! [ 3.437344] invalid opcode: 0000 [#1] PREEMPT SMP [ 3.437851] CPU 0 [ 3.438083] Pid: 1, comm: swapper/0 Not tainted 3.6.0-rc1-00378-g1dd8372 #1 Bochs Bochs [ 3.438868] RIP: 0010:[<ffffffff8178e531>] [<ffffffff8178e531>] mtd_do_chip_probe+0x1d/0x1f [ 3.439699] RSP: 0018:ffff880011049e38 EFLAGS: 00010246 [ 3.440200] RAX: 0000000000000000 RBX: ffffffff82a23f40 RCX: 0000000000000000 [ 3.440208] RDX: ffff880011049e38 RSI: ffffffff82a23f70 RDI: ffff880011049e98 [ 3.440208] RBP: ffff880011049e98 R08: 0000000000000003 R09: ffffffff810e2d09 [ 3.440208] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a248a0 [ 3.440208] R13: ffffffff8287990b R14: 0000000000000000 R15: 0000000000000000 [ 3.440208] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 3.440208] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3.440208] CR2: 0000000000000000 CR3: 0000000002986000 CR4: 00000000000006f0 [ 3.440208] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.440208] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3.440208] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 3.440208] Stack: [ 3.440208] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.440208] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.440208] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.440208] Call Trace: [ 3.440208] [<ffffffff81789ac0>] cfi_probe+0x15/0x17 [ 3.440208] [<ffffffff81789a59>] do_map_probe+0x9f/0xaa [ 3.440208] [<ffffffff834d8c67>] ? physmap_init+0x12/0x12 [ 3.440208] [<ffffffff834d8d6b>] init_sbc_gxx+0x104/0x15b [ 3.440208] [<ffffffff834941aa>] do_one_initcall+0x86/0x208 [ 3.440208] [<ffffffff83494436>] kernel_init+0x10a/0x1bf [ 3.440208] [<ffffffff83493735>] ? do_early_param+0xc1/0xc1 [ 3.440208] [<ffffffff8206b044>] kernel_thread_helper+0x4/0x10 [ 3.440208] [<ffffffff820695f4>] ? retint_restore_args+0x13/0x13 [ 3.440208] [<ffffffff8349432c>] ? do_one_initcall+0x208/0x208 [ 3.440208] [<ffffffff8206b040>] ? gs_change+0x13/0x13 [ 3.440208] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 0f 1f 44 00 00 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 0f 1f 44 00 00 48 c7 c6 90 43 a2 82 e8 cc ff [ 3.440208] RIP [<ffffffff8178e531>] mtd_do_chip_probe+0x1d/0x1f [ 3.440208] RSP <ffff880011049e38> [ 3.460667] ---[ end trace eb2e82e57c92e891 ]--- [ 3.461120] swapper/0 (1) used greatest stack depth: 4288 bytes left
/kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-quantal-vp-17:20140805145021:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-16:20140805145020:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-22:20140805145018:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-26:20140805145020:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-29:20140805145020:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-31:20140805145020:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-34:20140805145021:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-36:20140805145020:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-46:20140805145020:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 /kernel/x86_64-randconfig-s0-08051229/1dd8372d350583b0acc8d7cfd7a1dee05e1942dc/dmesg-yocto-vp-60:20140805145021:x86_64-randconfig-s0-08051229:3.6.0-rc1-00378-g1dd8372:1 0:10:10 all_good:bad:all_bad boots
[1;35m2014-08-05 14:51:01 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 9539 revisions left to test after this (roughly 14 steps)
[a410963ba4c0c768302f0298e258b1ee940e8316] Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:a410963ba4c0c768302f0298e258b1ee940e8316:bisect-linux1
2014-08-05 14:51:06 a410963ba4c0c768302f0298e258b1ee940e8316 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-a410963ba4c0c768302f0298e258b1ee940e8316 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/a410963ba4c0c768302f0298e258b1ee940e8316
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-a410963ba4c0c768302f0298e258b1ee940e8316 waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/x86_64-randconfig-s0-08051229-a410963ba4c0c768302f0298e258b1ee940e8316
kernel: /kernel/x86_64-randconfig-s0-08051229/a410963ba4c0c768302f0298e258b1ee940e8316/vmlinuz-3.5.0-07139-ga410963
2014-08-05 14:54:06 detecting boot state ... TEST FAILURE [ 6.677354] device id = 2670 [ 6.677921] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 6.678437] ------------[ cut here ]------------ [ 6.678814] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 6.679378] invalid opcode: 0000 [#1] PREEMPT SMP [ 6.679810] CPU 0 [ 6.679970] Pid: 1, comm: swapper/0 Not tainted 3.5.0-07139-ga410963 #8 Bochs Bochs [ 6.680257] RIP: 0010:[<ffffffff81784ed1>] [<ffffffff81784ed1>] mtd_do_chip_probe+0x1d/0x1f [ 6.680257] RSP: 0018:ffff880012441e38 EFLAGS: 00010246 [ 6.680257] RAX: 0000000000000000 RBX: ffffffff82a49f40 RCX: 0000000000000000 [ 6.680257] RDX: ffff880012441e38 RSI: ffffffff82a49f70 RDI: ffff880012441e98 [ 6.680257] RBP: ffff880012441e98 R08: 0000000000000003 R09: ffffffff810e06cc [ 6.680257] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a4a8a0 [ 6.680257] R13: ffffffff8289c1b7 R14: 0000000000000000 R15: 0000000000000000 [ 6.680257] FS: 0000000000000000(0000) GS:ffff880013a00000(0000) knlGS:0000000000000000 [ 6.680257] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6.680257] CR2: 0000000000000000 CR3: 00000000029b0000 CR4: 00000000000006f0 [ 6.680257] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.680257] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6.680257] Process swapper/0 (pid: 1, threadinfo ffff880012440000, task ffff880012418000) [ 6.680257] Stack: [ 6.680257] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.680257] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.680257] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.680257] Call Trace: [ 6.680257] [<ffffffff81780460>] cfi_probe+0x15/0x17 [ 6.680257] [<ffffffff817803f9>] do_map_probe+0x9f/0xaa [ 6.680257] [<ffffffff8350eb32>] ? physmap_init+0x12/0x12 [ 6.680257] [<ffffffff8350ec36>] init_sbc_gxx+0x104/0x15b [ 6.680257] [<ffffffff834ca1a8>] do_one_initcall+0x86/0x208 [ 6.680257] [<ffffffff834ca434>] kernel_init+0x10a/0x1bf [ 6.680257] [<ffffffff834c9735>] ? do_early_param+0xc1/0xc1 [ 6.680257] [<ffffffff8208b744>] kernel_thread_helper+0x4/0x10 [ 6.680257] [<ffffffff82089cf4>] ? retint_restore_args+0x13/0x13 [ 6.680257] [<ffffffff834ca32a>] ? do_one_initcall+0x208/0x208 [ 6.680257] [<ffffffff8208b740>] ? gs_change+0x13/0x13 [ 6.680257] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 90 a3 a4 82 e8 cc ff [ 6.680257] RIP [<ffffffff81784ed1>] mtd_do_chip_probe+0x1d/0x1f [ 6.680257] RSP <ffff880012441e38> [ 6.700023] ---[ end trace 75a3149bf5eda0e2 ]--- [ 6.700443] swapper/0 (1) used greatest stack depth: 4272 bytes left
/kernel/x86_64-randconfig-s0-08051229/a410963ba4c0c768302f0298e258b1ee940e8316/dmesg-yocto-vp-43:20140805145458:x86_64-randconfig-s0-08051229:3.5.0-07139-ga410963:8 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 14:55:37 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 7062 revisions left to test after this (roughly 13 steps)
[e8ff13b0bf88b5e696323a1eec877783d965b3c6] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:e8ff13b0bf88b5e696323a1eec877783d965b3c6:bisect-linux1
2014-08-05 14:55:38 e8ff13b0bf88b5e696323a1eec877783d965b3c6 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-e8ff13b0bf88b5e696323a1eec877783d965b3c6 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/e8ff13b0bf88b5e696323a1eec877783d965b3c6 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-e8ff13b0bf88b5e696323a1eec877783d965b3c6
kernel: /kernel/x86_64-randconfig-s0-08051229/e8ff13b0bf88b5e696323a1eec877783d965b3c6/vmlinuz-3.5.0-03932-ge8ff13b
2014-08-05 14:57:38 detecting boot state . 14.. 20 SUCCESS
Bisecting: 3130 revisions left to test after this (roughly 12 steps)
[79071638ce655c1f78a50d05c7dae0ad04a3e92a] Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:79071638ce655c1f78a50d05c7dae0ad04a3e92a:bisect-linux1
2014-08-05 15:00:10 79071638ce655c1f78a50d05c7dae0ad04a3e92a compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-79071638ce655c1f78a50d05c7dae0ad04a3e92a Check for kernel in /kernel/x86_64-randconfig-s0-08051229/79071638ce655c1f78a50d05c7dae0ad04a3e92a waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-79071638ce655c1f78a50d05c7dae0ad04a3e92a
kernel: /kernel/x86_64-randconfig-s0-08051229/79071638ce655c1f78a50d05c7dae0ad04a3e92a/vmlinuz-3.5.0-06353-g7907163
2014-08-05 15:02:10 detecting boot state 20 SUCCESS
Bisecting: 786 revisions left to test after this (roughly 10 steps)
[a9197f903f72a81393932d452379c8847fade544] Merge tag 'remoteproc-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:a9197f903f72a81393932d452379c8847fade544:bisect-linux1
2014-08-05 15:02:41 a9197f903f72a81393932d452379c8847fade544 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-a9197f903f72a81393932d452379c8847fade544 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-a9197f903f72a81393932d452379c8847fade544 waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/x86_64-randconfig-s0-08051229-a9197f903f72a81393932d452379c8847fade544
kernel: /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/vmlinuz-3.5.0-06855-ga9197f9
2014-08-05 15:06:41 detecting boot state ... TEST FAILURE [ 6.898902] device id = 2670 [ 6.899614] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 6.900545] ------------[ cut here ]------------ [ 6.901133] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 6.901862] invalid opcode: 0000 [#1] PREEMPT SMP [ 6.902428] CPU 0 [ 6.902630] Pid: 1, comm: swapper/0 Not tainted 3.5.0-06855-ga9197f9 #11 Bochs Bochs [ 6.903578] RIP: 0010:[<ffffffff81784e7d>] [<ffffffff81784e7d>] mtd_do_chip_probe+0x1d/0x1f [ 6.904480] RSP: 0018:ffff880012441e38 EFLAGS: 00010246 [ 6.904480] RAX: 0000000000000000 RBX: ffffffff82a49f40 RCX: 0000000000000000 [ 6.904480] RDX: ffff880012441e38 RSI: ffffffff82a49f70 RDI: ffff880012441e98 [ 6.904480] RBP: ffff880012441e98 R08: 0000000000000003 R09: ffffffff810e06cc [ 6.904480] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a4a8a0 [ 6.904480] R13: ffffffff8289b317 R14: 0000000000000000 R15: 0000000000000000 [ 6.904480] FS: 0000000000000000(0000) GS:ffff880013a00000(0000) knlGS:0000000000000000 [ 6.904480] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6.904480] CR2: 0000000000000000 CR3: 00000000029b0000 CR4: 00000000000406f0 [ 6.904480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.904480] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6.904480] Process swapper/0 (pid: 1, threadinfo ffff880012440000, task ffff880012418000) [ 6.904480] Stack: [ 6.904480] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.904480] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.904480] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.904480] Call Trace: [ 6.904480] [<ffffffff8178040c>] cfi_probe+0x15/0x17 [ 6.904480] [<ffffffff817803a5>] do_map_probe+0x9f/0xaa [ 6.904480] [<ffffffff8350db32>] ? physmap_init+0x12/0x12 [ 6.904480] [<ffffffff8350dc36>] init_sbc_gxx+0x104/0x15b [ 6.904480] [<ffffffff834c91a8>] do_one_initcall+0x86/0x208 [ 6.904480] [<ffffffff834c9434>] kernel_init+0x10a/0x1bf [ 6.904480] [<ffffffff834c8735>] ? do_early_param+0xc1/0xc1 [ 6.904480] [<ffffffff8208a604>] kernel_thread_helper+0x4/0x10 [ 6.904480] [<ffffffff82088bb4>] ? retint_restore_args+0x13/0x13 [ 6.904480] [<ffffffff834c932a>] ? do_one_initcall+0x208/0x208 [ 6.904480] [<ffffffff8208a600>] ? gs_change+0x13/0x13 [ 6.904480] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 90 a3 a4 82 e8 cc ff [ 6.904480] RIP [<ffffffff81784e7d>] mtd_do_chip_probe+0x1d/0x1f [ 6.904480] RSP <ffff880012441e38> [ 6.928542] ---[ end trace 47d3bad116b5e2a8 ]--- [ 6.929036] swapper/0 (1) used greatest stack depth: 4240 bytes left
/kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-30:20140805150528:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-14:20140805150533:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-15:20140805150533:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-16:20140805150536:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-17:20140805150534:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-18:20140805150533:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-19:20140805150536:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-1:20140805150534:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-20:20140805150533:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-21:20140805150534:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-22:20140805150533:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-26:20140805150534:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-27:20140805150536:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-28:20140805150535:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-2:20140805150534:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-4:20140805150535:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-kbuild-9:20140805150536:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-vp-18:20140805150803:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-vp-21:20140805150803:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 /kernel/x86_64-randconfig-s0-08051229/a9197f903f72a81393932d452379c8847fade544/dmesg-yocto-vp-49:20140805150803:x86_64-randconfig-s0-08051229:3.5.0-06855-ga9197f9:11 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 15:08:12 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 502 revisions left to test after this (roughly 9 steps)
[608adca52305e4d14ca5978f9c62698ca45d3f42] Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:608adca52305e4d14ca5978f9c62698ca45d3f42:bisect-linux1
2014-08-05 15:08:13 608adca52305e4d14ca5978f9c62698ca45d3f42 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-608adca52305e4d14ca5978f9c62698ca45d3f42 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/608adca52305e4d14ca5978f9c62698ca45d3f42
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-608adca52305e4d14ca5978f9c62698ca45d3f42 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-608adca52305e4d14ca5978f9c62698ca45d3f42
kernel: /kernel/x86_64-randconfig-s0-08051229/608adca52305e4d14ca5978f9c62698ca45d3f42/vmlinuz-3.5.0-06745-g608adca
2014-08-05 15:16:13 detecting boot state ... 7......... 8 11.................. 12 20 SUCCESS
Bisecting: 470 revisions left to test after this (roughly 9 steps)
[548ed10228093f1036297a333d1c1064f4daefdc] Merge tag 'dlm-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:548ed10228093f1036297a333d1c1064f4daefdc:bisect-linux1
2014-08-05 15:33:44 548ed10228093f1036297a333d1c1064f4daefdc compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-548ed10228093f1036297a333d1c1064f4daefdc Check for kernel in /kernel/x86_64-randconfig-s0-08051229/548ed10228093f1036297a333d1c1064f4daefdc waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-548ed10228093f1036297a333d1c1064f4daefdc
kernel: /kernel/x86_64-randconfig-s0-08051229/548ed10228093f1036297a333d1c1064f4daefdc/vmlinuz-3.5.0-06814-g548ed10
2014-08-05 15:35:44 detecting boot state 20 SUCCESS
Bisecting: 401 revisions left to test after this (roughly 9 steps)
[476525004ac7e2f990b6956efcd44d0780c2ab4c] Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:476525004ac7e2f990b6956efcd44d0780c2ab4c:bisect-linux1
2014-08-05 15:36:15 476525004ac7e2f990b6956efcd44d0780c2ab4c compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-476525004ac7e2f990b6956efcd44d0780c2ab4c Check for kernel in /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-476525004ac7e2f990b6956efcd44d0780c2ab4c waiting for completion of /kbuild-tests/build-queue/lkp-hsx01-consumer/x86_64-randconfig-s0-08051229-476525004ac7e2f990b6956efcd44d0780c2ab4c
kernel: /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/vmlinuz-3.5.0-06774-g4765250
2014-08-05 15:43:15 detecting boot state .. TEST FAILURE [ 3.884917] device id = 2670 [ 3.886395] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 3.887259] ------------[ cut here ]------------ [ 3.887964] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 3.888290] invalid opcode: 0000 [#1] PREEMPT SMP [ 3.888290] CPU 0 [ 3.888290] Pid: 1, comm: swapper/0 Not tainted 3.5.0-06774-g4765250 #12 Bochs Bochs [ 3.888290] RIP: 0010:[<ffffffff81784e7d>] [<ffffffff81784e7d>] mtd_do_chip_probe+0x1d/0x1f [ 3.888290] RSP: 0018:ffff880011043e38 EFLAGS: 00010246 [ 3.888290] RAX: 0000000000000000 RBX: ffffffff82a49f40 RCX: 0000000000000000 [ 3.888290] RDX: ffff880011043e38 RSI: ffffffff82a49f70 RDI: ffff880011043e98 [ 3.888290] RBP: ffff880011043e98 R08: 0000000000000003 R09: ffffffff810e06cc [ 3.888290] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a4a8a0 [ 3.888290] R13: ffffffff8289b317 R14: 0000000000000000 R15: 0000000000000000 [ 3.888290] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 3.888290] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3.888290] CR2: 0000000000000000 CR3: 00000000029b0000 CR4: 00000000000406f0 [ 3.888290] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.888290] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3.888290] Process swapper/0 (pid: 1, threadinfo ffff880011042000, task ffff880011048000) [ 3.888290] Stack: [ 3.888290] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.888290] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.888290] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 3.888290] Call Trace: [ 3.888290] [<ffffffff8178040c>] cfi_probe+0x15/0x17 [ 3.888290] [<ffffffff817803a5>] do_map_probe+0x9f/0xaa [ 3.888290] [<ffffffff8350db32>] ? physmap_init+0x12/0x12 [ 3.888290] [<ffffffff8350dc36>] init_sbc_gxx+0x104/0x15b [ 3.888290] [<ffffffff834c91a8>] do_one_initcall+0x86/0x208 [ 3.888290] [<ffffffff834c9434>] kernel_init+0x10a/0x1bf [ 3.888290] [<ffffffff834c8735>] ? do_early_param+0xc1/0xc1 [ 3.914776] [<ffffffff8208a604>] kernel_thread_helper+0x4/0x10 [ 3.914776] [<ffffffff82088bb4>] ? retint_restore_args+0x13/0x13 [ 3.914776] [<ffffffff834c932a>] ? do_one_initcall+0x208/0x208 [ 3.914776] [<ffffffff8208a600>] ? gs_change+0x13/0x13 [ 3.914776] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 90 a3 a4 82 e8 cc ff [ 3.914776] RIP [<ffffffff81784e7d>] mtd_do_chip_probe+0x1d/0x1f [ 3.914776] RSP <ffff880011043e38> [ 3.924277] ---[ end trace 91f6b15385698fde ]--- [ 3.924944] swapper/0 (1) used greatest stack depth: 3984 bytes left
/kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-19:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-22:20140805154116:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-25:20140805154116:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-28:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-4:20140805154116:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-yocto-vp-14:20140805154342:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-yocto-vp-21:20140805154342:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-13:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-14:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-17:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-20:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-23:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-24:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-26:20140805154117:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-5:20140805154117:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-6:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-7:20140805154124:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-21:20140805154132:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-29:20140805154132:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 /kernel/x86_64-randconfig-s0-08051229/476525004ac7e2f990b6956efcd44d0780c2ab4c/dmesg-quantal-kbuild-2:20140805154132:x86_64-randconfig-s0-08051229:3.5.0-06774-g4765250:12 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 15:44:16 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 320 revisions left to test after this (roughly 9 steps)
[bd22dc17e49973d3d4925970260e9e37f7580a9f] Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:bd22dc17e49973d3d4925970260e9e37f7580a9f:bisect-linux1
2014-08-05 15:44:16 bd22dc17e49973d3d4925970260e9e37f7580a9f compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-bd22dc17e49973d3d4925970260e9e37f7580a9f Check for kernel in /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-bd22dc17e49973d3d4925970260e9e37f7580a9f
kernel: /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/vmlinuz-3.5.0-06721-gbd22dc1
2014-08-05 15:46:17 detecting boot state . TEST FAILURE [ 5.104118] device id = 2670 [ 5.105308] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 5.106218] ------------[ cut here ]------------ [ 5.106842] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 5.107809] invalid opcode: 0000 [#1] PREEMPT SMP [ 5.108028] CPU 0 [ 5.108028] Pid: 1, comm: swapper/0 Not tainted 3.5.0-06721-gbd22dc1 #13 Bochs Bochs [ 5.108028] RIP: 0010:[<ffffffff81784c4b>] [<ffffffff81784c4b>] mtd_do_chip_probe+0x1d/0x1f [ 5.108028] RSP: 0018:ffff880011043e38 EFLAGS: 00010246 [ 5.108028] RAX: 0000000000000000 RBX: ffffffff82a47c70 RCX: 0000000000000000 [ 5.108028] RDX: ffff880011043e38 RSI: ffffffff82a47ca0 RDI: ffff880011043e98 [ 5.108028] RBP: ffff880011043e98 R08: 0000000000000003 R09: ffffffff810e06cc [ 5.108028] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a485d0 [ 5.108028] R13: ffffffff82899944 R14: 0000000000000000 R15: 0000000000000000 [ 5.108028] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 5.108028] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5.108028] CR2: 0000000000000000 CR3: 00000000029ae000 CR4: 00000000000406f0 [ 5.108028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5.108028] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 5.108028] Process swapper/0 (pid: 1, threadinfo ffff880011042000, task ffff880011048000) [ 5.108028] Stack: [ 5.108028] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.108028] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.108028] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.108028] Call Trace: [ 5.108028] [<ffffffff817801da>] cfi_probe+0x15/0x17 [ 5.108028] [<ffffffff81780173>] do_map_probe+0x9f/0xaa [ 5.108028] [<ffffffff8350bb32>] ? physmap_init+0x12/0x12 [ 5.108028] [<ffffffff8350bc36>] init_sbc_gxx+0x104/0x15b [ 5.108028] [<ffffffff834c71a8>] do_one_initcall+0x86/0x208 [ 5.108028] [<ffffffff834c7434>] kernel_init+0x10a/0x1bf [ 5.108028] [<ffffffff834c6735>] ? do_early_param+0xc1/0xc1 [ 5.108028] [<ffffffff82089dc4>] kernel_thread_helper+0x4/0x10 [ 5.108028] [<ffffffff82088374>] ? retint_restore_args+0x13/0x13 [ 5.108028] [<ffffffff834c732a>] ? do_one_initcall+0x208/0x208 [ 5.108028] [<ffffffff82089dc0>] ? gs_change+0x13/0x13 [ 5.108028] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 c0 80 a4 82 e8 cc ff [ 5.108028] RIP [<ffffffff81784c4b>] mtd_do_chip_probe+0x1d/0x1f [ 5.108028] RSP <ffff880011043e38> [ 5.146591] ---[ end trace fb23468ac213e66c ]--- [ 5.147440] swapper/0 (1) used greatest stack depth: 3984 bytes left
/kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-11:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-16:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-17:20140805154319:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-18:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-19:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-1:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-20:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-21:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-22:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-23:20140805154319:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-24:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-25:20140805154318:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-26:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-27:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-28:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-2:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-4:20140805154318:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-5:20140805154321:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-6:20140805154320:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 /kernel/x86_64-randconfig-s0-08051229/bd22dc17e49973d3d4925970260e9e37f7580a9f/dmesg-quantal-kbuild-8:20140805154320:x86_64-randconfig-s0-08051229:3.5.0-06721-gbd22dc1:13 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 15:46:47 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
linear-bisect: bad branch may be branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
linear-bisect: handle over to git bisect
linear-bisect: git bisect start bd22dc17e49973d3d4925970260e9e37f7580a9f 548ed10228093f1036297a333d1c1064f4daefdc --
Previous HEAD position was bd22dc1... Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
HEAD is now at 1e7e4de... Merge branch 'akpm-current/current'
Bisecting: 133 revisions left to test after this (roughly 7 steps)
[d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9] drm/i915: don't trylock in the gpu reset code
linear-bisect: git bisect run /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9:bisect-linux1
2014-08-05 15:53:26 d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9
kernel: /kernel/x86_64-randconfig-s0-08051229/d54a02c041ccfdcfe3efcd1e5b90c6e8d5e7a8d9/vmlinuz-3.5.0-rc4-00133-gd54a02c
2014-08-05 16:04:26 detecting boot state ....... 20 SUCCESS
Bisecting: 66 revisions left to test after this (roughly 6 steps)
[b68bdc1bbab743e2911b40c27b91a0a8e641cfb7] Merge branch 'next' of git://people.freedesktop.org/~deathsimple/linux into drm-next running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:b68bdc1bbab743e2911b40c27b91a0a8e641cfb7:bisect-linux1
2014-08-05 16:08:27 b68bdc1bbab743e2911b40c27b91a0a8e641cfb7 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-b68bdc1bbab743e2911b40c27b91a0a8e641cfb7 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/b68bdc1bbab743e2911b40c27b91a0a8e641cfb7 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-b68bdc1bbab743e2911b40c27b91a0a8e641cfb7
kernel: /kernel/x86_64-randconfig-s0-08051229/b68bdc1bbab743e2911b40c27b91a0a8e641cfb7/vmlinuz-3.5.0-rc4-00200-gb68bdc1
2014-08-05 16:10:27 detecting boot state ... TEST FAILURE [ 6.805249] device id = 2670 [ 6.805910] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 6.806478] ------------[ cut here ]------------ [ 6.806898] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 6.807522] invalid opcode: 0000 [#1] PREEMPT SMP [ 6.807951] CPU 0 [ 6.808052] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00200-gb68bdc1 #14 Bochs Bochs [ 6.808052] RIP: 0010:[<ffffffff8177eb58>] [<ffffffff8177eb58>] mtd_do_chip_probe+0x1d/0x1f [ 6.808052] RSP: 0018:ffff880012417e20 EFLAGS: 00010246 [ 6.808052] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 6.808052] RDX: ffff880012417e20 RSI: ffffffff82a23580 RDI: ffff880012417e80 [ 6.808052] RBP: ffff880012417e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 6.808052] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 6.808052] R13: ffffffff828790ae R14: 0000000000000000 R15: 0000000000000000 [ 6.808052] FS: 0000000000000000(0000) GS:ffff880013a00000(0000) knlGS:0000000000000000 [ 6.808052] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6.808052] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000006f0 [ 6.808052] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6.808052] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 6.808052] Process swapper/0 (pid: 1, threadinfo ffff880012416000, task ffff880012418000) [ 6.808052] Stack: [ 6.808052] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.808052] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.808052] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 6.808052] Call Trace: [ 6.808052] [<ffffffff8177a07f>] cfi_probe+0x15/0x17 [ 6.808052] [<ffffffff8177a015>] do_map_probe+0xa0/0xac [ 6.808052] [<ffffffff834d2aac>] ? physmap_init+0x12/0x12 [ 6.808052] [<ffffffff834d2bb0>] init_sbc_gxx+0x104/0x15b [ 6.808052] [<ffffffff8348e1b3>] do_one_initcall+0x86/0x208 [ 6.808052] [<ffffffff8348e442>] kernel_init+0x10d/0x1c2 [ 6.808052] [<ffffffff8348d739>] ? do_early_param+0xc3/0xc3 [ 6.808052] [<ffffffff8207b574>] kernel_thread_helper+0x4/0x10 [ 6.808052] [<ffffffff82079a34>] ? retint_restore_args+0x13/0x13 [ 6.808052] [<ffffffff8348e335>] ? do_one_initcall+0x208/0x208 [ 6.808052] [<ffffffff8207b570>] ? gs_change+0x13/0x13 [ 6.808052] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 6.808052] RIP [<ffffffff8177eb58>] mtd_do_chip_probe+0x1d/0x1f [ 6.808052] RSP <ffff880012417e20> [ 6.827580] ---[ end trace 657dd3946c30b477 ]--- [ 6.828022] swapper/0 (1) used greatest stack depth: 3768 bytes left
/kernel/x86_64-randconfig-s0-08051229/b68bdc1bbab743e2911b40c27b91a0a8e641cfb7/dmesg-yocto-vp-40:20140805161125:x86_64-randconfig-s0-08051229:3.5.0-rc4-00200-gb68bdc1:14 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 16:11:58 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 33 revisions left to test after this (roughly 5 steps)
[dee53e7fb3ee01b83c75a8e8df8c444049d38058] drm/radeon: add an exclusive lock for GPU reset v2
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:dee53e7fb3ee01b83c75a8e8df8c444049d38058:bisect-linux1
2014-08-05 16:11:59 dee53e7fb3ee01b83c75a8e8df8c444049d38058 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-dee53e7fb3ee01b83c75a8e8df8c444049d38058 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-dee53e7fb3ee01b83c75a8e8df8c444049d38058 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-dee53e7fb3ee01b83c75a8e8df8c444049d38058
kernel: /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/vmlinuz-3.5.0-rc4-00166-gdee53e7
2014-08-05 16:17:59 detecting boot state .. TEST FAILURE [ 4.213553] device id = 2670 [ 4.215027] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.215915] ------------[ cut here ]------------ [ 4.216018] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 4.216018] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.216018] CPU 0 [ 4.216018] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00166-gdee53e7 #9 Bochs Bochs [ 4.216018] RIP: 0010:[<ffffffff8177e8de>] [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.216018] RSP: 0018:ffff880011049e20 EFLAGS: 00010246 [ 4.216018] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 4.216018] RDX: ffff880011049e20 RSI: ffffffff82a23580 RDI: ffff880011049e80 [ 4.216018] RBP: ffff880011049e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 4.216018] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 4.216018] R13: ffffffff828790ce R14: 0000000000000000 R15: 0000000000000000 [ 4.216018] FS: 0000000000000000(0000) GS:ffff880012400000(0000) knlGS:0000000000000000 [ 4.216018] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.216018] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000406f0 [ 4.216018] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.216018] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.216018] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 4.216018] Stack: [ 4.216018] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.216018] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.216018] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.216018] Call Trace: [ 4.216018] [<ffffffff81779e05>] cfi_probe+0x15/0x17 [ 4.216018] [<ffffffff81779d9b>] do_map_probe+0xa0/0xac [ 4.216018] [<ffffffff834d1aac>] ? physmap_init+0x12/0x12 [ 4.216018] [<ffffffff834d1bb0>] init_sbc_gxx+0x104/0x15b [ 4.216018] [<ffffffff8348d1b3>] do_one_initcall+0x86/0x208 [ 4.216018] [<ffffffff8348d442>] kernel_init+0x10d/0x1c2 [ 4.216018] [<ffffffff8348c739>] ? do_early_param+0xc3/0xc3 [ 4.216018] [<ffffffff8207b2f4>] kernel_thread_helper+0x4/0x10 [ 4.216018] [<ffffffff820797b4>] ? retint_restore_args+0x13/0x13 [ 4.216018] [<ffffffff8348d335>] ? do_one_initcall+0x208/0x208 [ 4.216018] [<ffffffff8207b2f0>] ? gs_change+0x13/0x13 [ 4.216018] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 4.216018] RIP [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.216018] RSP <ffff880011049e20> [ 4.249692] Refined TSC clocksource calibration: 2693.506 MHz. [ 4.250544] ---[ end trace 356be3255f764328 ]--- [ 4.251222] swapper/0 (1) used greatest stack depth: 3768 bytes left
/kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-11:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-13:20140805161629:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-14:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-16:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-19:20140805161629:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-20:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-21:20140805161623:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-22:20140805161629:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-23:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-25:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-27:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-28:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-29:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-2:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-31:20140805161629:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-32:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-3:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-5:20140805161623:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-6:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 /kernel/x86_64-randconfig-s0-08051229/dee53e7fb3ee01b83c75a8e8df8c444049d38058/dmesg-quantal-kbuild-8:20140805161624:x86_64-randconfig-s0-08051229:3.5.0-rc4-00166-gdee53e7:9 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 16:19:00 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 16 revisions left to test after this (roughly 4 steps)
[0242f74d29df00ea97a6377e3c66f14efbb340d3] drm/radeon: clean up CS functions in r100.c
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:0242f74d29df00ea97a6377e3c66f14efbb340d3:bisect-linux1
2014-08-05 16:19:00 0242f74d29df00ea97a6377e3c66f14efbb340d3 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-0242f74d29df00ea97a6377e3c66f14efbb340d3 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/0242f74d29df00ea97a6377e3c66f14efbb340d3
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-0242f74d29df00ea97a6377e3c66f14efbb340d3 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-0242f74d29df00ea97a6377e3c66f14efbb340d3
kernel: /kernel/x86_64-randconfig-s0-08051229/0242f74d29df00ea97a6377e3c66f14efbb340d3/vmlinuz-3.5.0-rc4-00119-g0242f74
2014-08-05 16:22:00 detecting boot state 1....... 2 10. 20 SUCCESS
Bisecting: 8 revisions left to test after this (roughly 3 steps)
[c2c75131244507c93f812862fdbd4f3a37139401] drm/i915: adjust framebuffer base address on gen4+
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:c2c75131244507c93f812862fdbd4f3a37139401:bisect-linux1
2014-08-05 16:28:01 c2c75131244507c93f812862fdbd4f3a37139401 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-c2c75131244507c93f812862fdbd4f3a37139401 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/c2c75131244507c93f812862fdbd4f3a37139401 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-c2c75131244507c93f812862fdbd4f3a37139401
kernel: /kernel/x86_64-randconfig-s0-08051229/c2c75131244507c93f812862fdbd4f3a37139401/vmlinuz-3.5.0-rc4-00141-gc2c7513
2014-08-05 16:30:01 detecting boot state 20 SUCCESS
Bisecting: 4 revisions left to test after this (roughly 2 steps)
[12f0e670ff2ae5a59984ffae036ddd739cf10b09] Merge tag 'drm-intel-next-2012-07-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-next running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:12f0e670ff2ae5a59984ffae036ddd739cf10b09:bisect-linux1
2014-08-05 16:30:32 12f0e670ff2ae5a59984ffae036ddd739cf10b09 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-12f0e670ff2ae5a59984ffae036ddd739cf10b09 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/12f0e670ff2ae5a59984ffae036ddd739cf10b09 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-12f0e670ff2ae5a59984ffae036ddd739cf10b09
kernel: /kernel/x86_64-randconfig-s0-08051229/12f0e670ff2ae5a59984ffae036ddd739cf10b09/vmlinuz-3.5.0-rc4-00161-g12f0e67
2014-08-05 16:32:32 detecting boot state ....... 12 20 SUCCESS
Bisecting: 2 revisions left to test after this (roughly 1 step)
[7ecc45e3ef8468abb062be2a8bb427029342f42d] drm/radeon: add error handling to fence_wait_empty_locked
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:7ecc45e3ef8468abb062be2a8bb427029342f42d:bisect-linux1
2014-08-05 16:37:02 7ecc45e3ef8468abb062be2a8bb427029342f42d compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-7ecc45e3ef8468abb062be2a8bb427029342f42d Check for kernel in /kernel/x86_64-randconfig-s0-08051229/7ecc45e3ef8468abb062be2a8bb427029342f42d waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-7ecc45e3ef8468abb062be2a8bb427029342f42d
kernel: /kernel/x86_64-randconfig-s0-08051229/7ecc45e3ef8468abb062be2a8bb427029342f42d/vmlinuz-3.5.0-rc4-00163-g7ecc45e
2014-08-05 16:39:02 detecting boot state ... TEST FAILURE [ 2.923960] device id = 2670 [ 2.928561] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 2.929140] ------------[ cut here ]------------ [ 2.929590] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 2.930274] invalid opcode: 0000 [#1] PREEMPT SMP [ 2.930713] CPU 1 [ 2.930908] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00163-g7ecc45e #11 Bochs Bochs [ 2.931702] RIP: 0010:[<ffffffff8177e8de>] [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 2.932021] RSP: 0018:ffff880011049e20 EFLAGS: 00010246 [ 2.932021] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 2.932021] RDX: ffff880011049e20 RSI: ffffffff82a23580 RDI: ffff880011049e80 [ 2.932021] RBP: ffff880011049e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 2.932021] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 2.932021] R13: ffffffff828790ce R14: 0000000000000000 R15: 0000000000000000 [ 2.932021] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 2.932021] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2.932021] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000406e0 [ 2.932021] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.932021] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 2.932021] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 2.932021] Stack: [ 2.932021] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 2.932021] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 2.932021] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 2.932021] Call Trace: [ 2.932021] [<ffffffff81779e05>] cfi_probe+0x15/0x17 [ 2.932021] [<ffffffff81779d9b>] do_map_probe+0xa0/0xac [ 2.932021] [<ffffffff834d1aac>] ? physmap_init+0x12/0x12 [ 2.932021] [<ffffffff834d1bb0>] init_sbc_gxx+0x104/0x15b [ 2.932021] [<ffffffff8348d1b3>] do_one_initcall+0x86/0x208 [ 2.932021] [<ffffffff8348d442>] kernel_init+0x10d/0x1c2 [ 2.932021] [<ffffffff8348c739>] ? do_early_param+0xc3/0xc3 [ 2.932021] [<ffffffff8207b2f4>] kernel_thread_helper+0x4/0x10 [ 2.932021] [<ffffffff820797b4>] ? retint_restore_args+0x13/0x13 [ 2.932021] [<ffffffff8348d335>] ? do_one_initcall+0x208/0x208 [ 2.932021] [<ffffffff8207b2f0>] ? gs_change+0x13/0x13 [ 2.932021] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 2.932021] RIP [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 2.932021] RSP <ffff880011049e20> [ 2.951373] ---[ end trace 7247ede10f75d28a ]--- [ 2.951807] swapper/0 (1) used greatest stack depth: 3768 bytes left
/kernel/x86_64-randconfig-s0-08051229/7ecc45e3ef8468abb062be2a8bb427029342f42d/dmesg-quantal-kbuild-19:20140805163743:x86_64-randconfig-s0-08051229:3.5.0-rc4-00163-g7ecc45e:11 0:1:1 all_good:bad:all_bad boots
[1;35m2014-08-05 16:40:33 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[49099c4991da3c94773f888aea2e9d27b8a7c6d1] drm: fail gracefully when proc isn't setup.
running /c/kernel-tests/bisect-test-boot-failure.sh /c/boot-bisect/linux1/obj-bisect
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:49099c4991da3c94773f888aea2e9d27b8a7c6d1:bisect-linux1
2014-08-05 16:40:34 49099c4991da3c94773f888aea2e9d27b8a7c6d1 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-49099c4991da3c94773f888aea2e9d27b8a7c6d1 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1 waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-49099c4991da3c94773f888aea2e9d27b8a7c6d1
kernel: /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/vmlinuz-3.5.0-rc4-00162-g49099c4
2014-08-05 16:42:34 detecting boot state . TEST FAILURE [ 4.543580] device id = 2670 [ 4.545744] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.546794] ------------[ cut here ]------------ [ 4.547540] kernel BUG at /kbuild/src/consumer/include/linux/mtd/map.h:148! [ 4.548102] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.548102] CPU 1 [ 4.548102] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00162-g49099c4 #17 Bochs Bochs [ 4.548102] RIP: 0010:[<ffffffff8177e8de>] [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.548102] RSP: 0018:ffff880011049e20 EFLAGS: 00010246 [ 4.548102] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 4.548102] RDX: ffff880011049e20 RSI: ffffffff82a23580 RDI: ffff880011049e80 [ 4.548102] RBP: ffff880011049e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 4.548102] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 4.548102] R13: ffffffff828790ce R14: 0000000000000000 R15: 0000000000000000 [ 4.548102] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 4.548102] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.548102] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000406e0 [ 4.548102] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.548102] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.548102] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 4.548102] Stack: [ 4.548102] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.548102] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.548102] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.548102] Call Trace: [ 4.548102] [<ffffffff81779e05>] cfi_probe+0x15/0x17 [ 4.548102] [<ffffffff81779d9b>] do_map_probe+0xa0/0xac [ 4.548102] [<ffffffff834d1aac>] ? physmap_init+0x12/0x12 [ 4.548102] [<ffffffff834d1bb0>] init_sbc_gxx+0x104/0x15b [ 4.548102] [<ffffffff8348d1b3>] do_one_initcall+0x86/0x208 [ 4.548102] [<ffffffff8348d442>] kernel_init+0x10d/0x1c2 [ 4.548102] [<ffffffff8348c739>] ? do_early_param+0xc3/0xc3 [ 4.548102] [<ffffffff8207b2f4>] kernel_thread_helper+0x4/0x10 [ 4.548102] [<ffffffff820797b4>] ? retint_restore_args+0x13/0x13 [ 4.548102] [<ffffffff8348d335>] ? do_one_initcall+0x208/0x208 [ 4.548102] [<ffffffff8207b2f0>] ? gs_change+0x13/0x13 [ 4.548102] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 4.548102] RIP [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.548102] RSP <ffff880011049e20> [ 4.584071] ---[ end trace 6a98ebaaea542e4f ]--- [ 4.584841] swapper/0 (1) used greatest stack depth: 3768 bytes left
/kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-10:20140805163940:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-11:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-12:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-15:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-19:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-1:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-20:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-21:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-23:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-25:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-26:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-28:20140805163938:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-2:20140805163940:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-30:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-32:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-3:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-8:20140805163937:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-9:20140805163940:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-16:20140805163946:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 /kernel/x86_64-randconfig-s0-08051229/49099c4991da3c94773f888aea2e9d27b8a7c6d1/dmesg-quantal-kbuild-5:20140805163946:x86_64-randconfig-s0-08051229:3.5.0-rc4-00162-g49099c4:17 0:20:20 all_good:bad:all_bad boots
[1;35m2014-08-05 16:43:05 REPEAT COUNT: 20 # /c/boot-bisect/linux1/obj-bisect/.repeat[0m
49099c4991da3c94773f888aea2e9d27b8a7c6d1 is the first bad commit commit 49099c4991da3c94773f888aea2e9d27b8a7c6d1
Author: Dave Airlie <[email protected]> Date: Fri Jul 6 18:06:42 2012 +0100
drm: fail gracefully when proc isn't setup.
If drm can't find proc it should fail more gracefully, than just oopsing, this tests drm_class is NULL, and sets it to NULL in the fail paths.
:040000 040000 20d127560b1bd47088d41c972ca4c9335040a11c 893f6096a8a8c75208ae2752f29a44c91f40af07 M drivers
bisect run success
Previous HEAD position was 49099c4... drm: fail gracefully when proc isn't setup.
HEAD is now at 12f0e67... Merge tag 'drm-intel-next-2012-07-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-next ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:12f0e670ff2ae5a59984ffae036ddd739cf10b09:bisect-linux1
2014-08-05 16:43:06 12f0e670ff2ae5a59984ffae036ddd739cf10b09 reuse /kernel/x86_64-randconfig-s0-08051229/12f0e670ff2ae5a59984ffae036ddd739cf10b09/vmlinuz-3.5.0-rc4-00161-g12f0e67
2014-08-05 16:43:06 detecting boot state . 47 60 SUCCESS
Previous HEAD position was 12f0e67... Merge tag 'drm-intel-next-2012-07-06' of git://people.freedesktop.org/~danvet/drm-intel into drm-next HEAD is now at 7d5b323... 0day head guard for 'devel-hourly-2014080511'
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linux-devel:devel-hourly-2014080511:7d5b32398354b2cb45d711c021557d8da09ae30b:bisect-linux1
TEST FAILURE
[ 5.799223] device id = 2670 [ 5.800448] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 5.801033] ------------[ cut here ]------------ [ 5.801449] kernel BUG at /kbuild/src/smoke/include/linux/mtd/map.h:148! [ 5.802042] invalid opcode: 0000 [#1] PREEMPT SMP [ 5.802528] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-02162-g7d5b323 #54 [ 5.803165] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 5.803680] task: ffff880011148000 ti: ffff880011150000 task.ti: ffff880011150000 [ 5.804042] RIP: 0010:[<ffffffff89674fb3>] [<ffffffff89674fb3>] mtd_do_chip_probe+0x1d/0x1f [ 5.804042] RSP: 0000:ffff880011153df0 EFLAGS: 00010246 [ 5.804042] RAX: 0000000000000000 RBX: ffffffff8bad4ae0 RCX: 0000000000000000 [ 5.804042] RDX: ffff880011153df0 RSI: ffffffff8bad4b10 RDI: ffff880011153e50 [ 5.804042] RBP: ffff880011153e50 R08: 00000000be169693 R09: 0000000000000002 [ 5.804042] R10: 0000000000000000 R11: 0000000000000064 R12: ffffffff8bad55c0 [ 5.804042] R13: ffffffff8ac81d2b R14: 0000000000000000 R15: 0000000000000000 [ 5.804042] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 5.804042] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 5.804042] CR2: 00000000ffffffff CR3: 000000000adb7000 CR4: 00000000000006e0 [ 5.804042] Stack: [ 5.804042] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.804042] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.804042] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.804042] Call Trace: [ 5.804042] [<ffffffff8966fdc0>] cfi_probe+0x15/0x17 [ 5.804042] [<ffffffff8966fd59>] do_map_probe+0x9f/0xaa [ 5.804042] [<ffffffff8c85e10d>] ? physmap_init+0x14/0x14 [ 5.804042] [<ffffffff8c85e211>] init_sbc_gxx+0x104/0x15b [ 5.804042] [<ffffffff8c7f6790>] do_one_initcall+0x140/0x2b6 [ 5.804042] [<ffffffff88cda400>] ? parameqn+0x7f/0x84 [ 5.804042] [<ffffffff88cda78f>] ? parse_args+0x366/0x48f [ 5.804042] [<ffffffff8c7f6a10>] kernel_init_freeable+0x10a/0x1cc [ 5.804042] [<ffffffff8c7f5ab4>] ? initcall_blacklist+0xba/0xba [ 5.804042] [<ffffffff8a14a8da>] ? rest_init+0x15e/0x15e [ 5.804042] [<ffffffff8a14a8e8>] kernel_init+0xe/0x154 [ 5.804042] [<ffffffff8a1901fc>] ret_from_fork+0x7c/0xb0 [ 5.804042] [<ffffffff8a14a8da>] ? rest_init+0x15e/0x15e [ 5.804042] Code: 83 c4 48 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 0f 1f 44 00 00 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 0f 1f 44 00 00 48 c7 c6 50 4f ad 8b e8 cc ff [ 5.804042] RIP [<ffffffff89674fb3>] mtd_do_chip_probe+0x1d/0x1f [ 5.804042] RSP <ffff880011153df0> [ 5.823350] ---[ end trace 9065aa051388d066 ]--- [ 5.823802] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
/kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-23:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-4:20140805124325:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-3:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-12:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-1:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-yocto-vp-29:20140805124009:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-yocto-vp-45:20140805124325:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-31:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-9:20140805124325:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-26:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 /kernel/x86_64-randconfig-s0-08051229/7d5b32398354b2cb45d711c021557d8da09ae30b/dmesg-quantal-vp-5:20140805124320:x86_64-randconfig-s0-08051229:3.16.0-02162-g7d5b323:54 0:11:11 all_good:bad:all_bad boots
HEAD is now at 7d5b323 0day head guard for 'devel-hourly-2014080511'
========= linus/master =========
Previous HEAD position was 7d5b323... 0day head guard for 'devel-hourly-2014080511'
HEAD is now at 8e099d1... Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/linus:master:8e099d1e8be3f598dcefd04d3cd5eb3673d4e098:bisect-linux1
2014-08-05 16:44:47 8e099d1e8be3f598dcefd04d3cd5eb3673d4e098 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-8e099d1e8be3f598dcefd04d3cd5eb3673d4e098 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/8e099d1e8be3f598dcefd04d3cd5eb3673d4e098
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-8e099d1e8be3f598dcefd04d3cd5eb3673d4e098 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-8e099d1e8be3f598dcefd04d3cd5eb3673d4e098
status: FAIL: build error
[1;35m2014-08-05 17:00:47 Kernel build fail or timeout[0m
2014-08-05 17:00:47 8e099d1e8be3f598dcefd04d3cd5eb3673d4e098 SKIP BROKEN BUILD
Check /kbuild-tests/build-served/x86_64-randconfig-s0-08051229-8e099d1e8be3f598dcefd04d3cd5eb3673d4e098
========= next/master =========
From git://gitmirror/next
+ 0a0724d...b219323 akpm -> next/akpm (forced update)
+ 27d6e5c...ce8a8285 akpm-base -> next/akpm-base (forced update)
+ d733862...913b188 master -> next/master (forced update)
19583ca..9895994 stable -> next/stable
From git://gitmirror/next
* [new tag] next-20140805 -> next-20140805
Previous HEAD position was 8e099d1... Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
HEAD is now at 913b188... Add linux-next specific files for 20140805
ls -a /kbuild-tests/run-queue/kvm/x86_64-randconfig-s0-08051229/next:master:913b188a45d13edbcddfa15bd420a580fd7a1f25:bisect-linux1
2014-08-05 17:01:16 913b188a45d13edbcddfa15bd420a580fd7a1f25 compiling
Queued build task to /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-913b188a45d13edbcddfa15bd420a580fd7a1f25 Check for kernel in /kernel/x86_64-randconfig-s0-08051229/913b188a45d13edbcddfa15bd420a580fd7a1f25
waiting for completion of /kbuild-tests/build-queue/x86_64-randconfig-s0-08051229-913b188a45d13edbcddfa15bd420a580fd7a1f25 waiting for completion of /kbuild-tests/build-queue/jaketown-consumer/x86_64-randconfig-s0-08051229-913b188a45d13edbcddfa15bd420a580fd7a1f25
status: FAIL: build error
[1;35m2014-08-05 17:26:16 Kernel build fail or timeout[0m
2014-08-05 17:26:16 913b188a45d13edbcddfa15bd420a580fd7a1f25 SKIP BROKEN BUILD
Check /kbuild-tests/build-served/x86_64-randconfig-s0-08051229-913b188a45d13edbcddfa15bd420a580fd7a1f25
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.5.0-rc4 Kernel Configuration
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_NEED_SG_DMA_LENGTH=y
# CONFIG_GENERIC_ISA_DMA is not setCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_MAY_HAVE_PC_FDC is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_CPU_AUTOPROBE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_HAVE_IRQ_WORK=yCONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
# CONFIG_EXPERIMENTAL is not setCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not setCONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_FHANDLE is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=yCONFIG_IRQ_DOMAIN_DEBUG=yCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not setCONFIG_HIGH_RES_TIMERS=y
#
# RCU Subsystem
#CONFIG_TREE_PREEMPT_RCU=yCONFIG_PREEMPT_RCU=yCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_LEAF=16CONFIG_RCU_FANOUT_EXACT=yCONFIG_TREE_RCU_TRACE=yCONFIG_RCU_BOOST=yCONFIG_RCU_BOOST_PRIO=1CONFIG_RCU_BOOST_DELAY=500CONFIG_IKCONFIG=yCONFIG_LOG_BUF_SHIFT=17CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not setCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not setCONFIG_NAMESPACES=yCONFIG_UTS_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not setCONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not setCONFIG_RD_XZ=y
# CONFIG_RD_LZO is not setCONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_ANON_INODES=yCONFIG_EXPERT=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not setCONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
# CONFIG_AIO is not setCONFIG_EMBEDDED=yCONFIG_HAVE_PERF_EVENTS=yCONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=yCONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not setCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not setCONFIG_UPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ALIGNED_STRUCT_PAGE=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP_FILTER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=yCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_ZONE_DMA is not setCONFIG_SMP=y
# CONFIG_X86_MPPARSE is not set CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_VSMP=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_PARAVIRT_GUEST=y CONFIG_PARAVIRT_TIME_ACCOUNTING=y
# CONFIG_XEN is not set
# CONFIG_XEN_PRIVILEGED_GUEST is not set CONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=y CONFIG_PARAVIRT_DEBUG=yCONFIG_NO_BOOTMEM=yCONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=12 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=y
# CONFIG_GART_IOMMU is not set CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=yCONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=yCONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
# CONFIG_X86_MCE_AMD is not set
# CONFIG_X86_MCE_INJECT is not set CONFIG_I8K=y
# CONFIG_MICROCODE is not set CONFIG_X86_MSR=yCONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_NUMA_EMU=yCONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_COMPACTION=yCONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0CONFIG_VIRT_TO_BUS=yCONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_CLEANCACHE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set CONFIG_ARCH_RANDOM=y
# CONFIG_EFI is not setCONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not setCONFIG_ACPI=y
# CONFIG_ACPI_EC_DEBUGFS is not setCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_FAN=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_APEI is not setCONFIG_SFI=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not setCONFIG_CPU_IDLE=yCONFIG_CPU_IDLE_GOV_LADDER=yCONFIG_INTEL_IDLE=y
#
# Memory power savings
#
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not setCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not setCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
# CONFIG_PCIEASPM_DEFAULT is not setCONFIG_PCIEASPM_POWERSAVE=y
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not setCONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not setCONFIG_HT_IRQ=yCONFIG_PCI_ATS=yCONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCI_IOAPIC is not setCONFIG_PCI_LABEL=y
# CONFIG_ISA_DMA_API is not setCONFIG_AMD_NB=yCONFIG_PCCARD=y
# CONFIG_PCMCIA is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_HOTPLUG_PCI is not setCONFIG_RAPIDIO=yCONFIG_RAPIDIO_TSI721=yCONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not setCONFIG_RAPIDIO_DEBUG=yCONFIG_RAPIDIO_TSI57X=yCONFIG_RAPIDIO_CPS_XX=yCONFIG_RAPIDIO_TSI568=y
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_TSI500 is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=y
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not setCONFIG_HAVE_TEXT_POKE_SMP=yCONFIG_X86_DEV_DMA_OPS=yCONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not setCONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not setCONFIG_XFRM=yCONFIG_XFRM_ALGO=yCONFIG_XFRM_USER=yCONFIG_XFRM_IPCOMP=yCONFIG_NET_KEY=yCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not setCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not setCONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not setCONFIG_IP_PIMSM_V1=y
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not setCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not setCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_INET_UDP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=yCONFIG_TCP_CONG_HTCP=y
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not setCONFIG_IPV6_ROUTER_PREF=yCONFIG_INET6_AH=yCONFIG_INET6_ESP=yCONFIG_INET6_IPCOMP=yCONFIG_INET6_XFRM_TUNNEL=yCONFIG_INET6_TUNNEL=yCONFIG_INET6_XFRM_MODE_TRANSPORT=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not setCONFIG_INET6_XFRM_MODE_BEET=yCONFIG_IPV6_SIT=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=yCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=yCONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_NETLINK_ACCT=yCONFIG_NETFILTER_NETLINK_QUEUE=yCONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=y
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not setCONFIG_NETFILTER_XT_TARGET_DSCP=yCONFIG_NETFILTER_XT_TARGET_HL=yCONFIG_NETFILTER_XT_TARGET_HMARK=y
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not setCONFIG_NETFILTER_XT_TARGET_LED=yCONFIG_NETFILTER_XT_TARGET_LOG=y
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not setCONFIG_NETFILTER_XT_TARGET_NFQUEUE=yCONFIG_NETFILTER_XT_TARGET_RATEEST=yCONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_TRACE is not setCONFIG_NETFILTER_XT_TARGET_SECMARK=yCONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not setCONFIG_NETFILTER_XT_MATCH_CPU=yCONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not setCONFIG_NETFILTER_XT_MATCH_DSCP=yCONFIG_NETFILTER_XT_MATCH_ECN=yCONFIG_NETFILTER_XT_MATCH_ESP=yCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=yCONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not setCONFIG_NETFILTER_XT_MATCH_LIMIT=yCONFIG_NETFILTER_XT_MATCH_MAC=yCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_MULTIPORT=yCONFIG_NETFILTER_XT_MATCH_NFACCT=y
# CONFIG_NETFILTER_XT_MATCH_OSF is not setCONFIG_NETFILTER_XT_MATCH_OWNER=yCONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not setCONFIG_NETFILTER_XT_MATCH_RATEEST=y
# CONFIG_NETFILTER_XT_MATCH_REALM is not setCONFIG_NETFILTER_XT_MATCH_RECENT=yCONFIG_NETFILTER_XT_MATCH_STATISTIC=yCONFIG_NETFILTER_XT_MATCH_STRING=yCONFIG_NETFILTER_XT_MATCH_TCPMSS=yCONFIG_NETFILTER_XT_MATCH_TIME=yCONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=yCONFIG_IP_NF_MATCH_AH=yCONFIG_IP_NF_MATCH_ECN=yCONFIG_IP_NF_MATCH_RPFILTER=y
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_ULOG is not setCONFIG_IP_NF_MANGLE=yCONFIG_IP_NF_TARGET_ECN=yCONFIG_IP_NF_TARGET_TTL=yCONFIG_IP_NF_RAW=yCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not setCONFIG_BRIDGE_NF_EBTABLES=yCONFIG_BRIDGE_EBT_BROUTE=yCONFIG_BRIDGE_EBT_T_FILTER=yCONFIG_BRIDGE_EBT_T_NAT=y
# CONFIG_BRIDGE_EBT_802_3 is not setCONFIG_BRIDGE_EBT_AMONG=yCONFIG_BRIDGE_EBT_ARP=yCONFIG_BRIDGE_EBT_IP=yCONFIG_BRIDGE_EBT_IP6=yCONFIG_BRIDGE_EBT_LIMIT=yCONFIG_BRIDGE_EBT_MARK=yCONFIG_BRIDGE_EBT_PKTTYPE=yCONFIG_BRIDGE_EBT_STP=yCONFIG_BRIDGE_EBT_VLAN=yCONFIG_BRIDGE_EBT_ARPREPLY=yCONFIG_BRIDGE_EBT_DNAT=yCONFIG_BRIDGE_EBT_MARK_T=yCONFIG_BRIDGE_EBT_REDIRECT=y
# CONFIG_BRIDGE_EBT_SNAT is not setCONFIG_BRIDGE_EBT_LOG=yCONFIG_BRIDGE_EBT_ULOG=y
# CONFIG_BRIDGE_EBT_NFLOG is not setCONFIG_ATM=yCONFIG_ATM_CLIP=yCONFIG_ATM_CLIP_NO_ICMP=yCONFIG_ATM_LANE=y
# CONFIG_ATM_MPOA is not set
# CONFIG_ATM_BR2684 is not setCONFIG_L2TP=yCONFIG_L2TP_DEBUGFS=yCONFIG_STP=yCONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_VLAN_8021Q is not setCONFIG_DECNET=yCONFIG_LLC=y
# CONFIG_LLC2 is not setCONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not setCONFIG_PHONET=yCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
# CONFIG_NET_SCH_PRIO is not setCONFIG_NET_SCH_MULTIQ=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFB=yCONFIG_NET_SCH_SFQ=yCONFIG_NET_SCH_TEQL=y
# CONFIG_NET_SCH_TBF is not setCONFIG_NET_SCH_GRED=yCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not setCONFIG_NET_SCH_MQPRIO=yCONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not setCONFIG_NET_SCH_FQ_CODEL=yCONFIG_NET_SCH_INGRESS=yCONFIG_NET_SCH_PLUG=y
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=y
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not setCONFIG_NET_CLS_RSVP=yCONFIG_NET_CLS_RSVP6=yCONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_EMATCH is not setCONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not setCONFIG_NET_ACT_GACT=yCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=yCONFIG_NET_ACT_IPT=yCONFIG_NET_ACT_NAT=yCONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not setCONFIG_NET_ACT_SKBEDIT=yCONFIG_NET_ACT_CSUM=yCONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not setCONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not setCONFIG_OPENVSWITCH=yCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not setCONFIG_BQL=y
#
# Network testing
#CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=yCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=y
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
# CONFIG_MKISS is not setCONFIG_6PACK=yCONFIG_BPQETHER=yCONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
# CONFIG_BAYCOM_PAR is not setCONFIG_YAM=y
# CONFIG_CAN is not setCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=yCONFIG_IRNET=yCONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=yCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not setCONFIG_BT=yCONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not setCONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=yCONFIG_BT_HCIBTSDIO=y
# CONFIG_BT_HCIUART is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not setCONFIG_BT_MRVL=yCONFIG_BT_MRVL_SDIO=yCONFIG_BT_ATH3K=yCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=yCONFIG_LIB80211_DEBUG=y
#
# CFG80211 needs to be enabled for MAC80211
#CONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not setCONFIG_NET_9P=yCONFIG_NET_9P_VIRTIO=yCONFIG_NET_9P_DEBUG=yCONFIG_CAIF=yCONFIG_CAIF_DEBUG=yCONFIG_CAIF_NETDEV=yCONFIG_CAIF_USB=yCONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=yCONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not setCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_IRQ=yCONFIG_DMA_SHARED_BUFFER=yCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=yCONFIG_MTD_REDBOOT_PARTS=yCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not setCONFIG_MTD_CMDLINE_PARTS=yCONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not setCONFIG_HAVE_MTD_OTP=yCONFIG_MTD_BLKDEVS=yCONFIG_MTD_BLOCK=y
# CONFIG_FTL is not setCONFIG_NFTL=yCONFIG_NFTL_RW=y
# CONFIG_INFTL is not setCONFIG_RFD_FTL=y
# CONFIG_SSFDC is not setCONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=yCONFIG_MTD_JEDECPROBE=yCONFIG_MTD_GEN_PROBE=yCONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_NOSWAP is not set
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not setCONFIG_MTD_CFI_LE_BYTE_SWAP=yCONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not setCONFIG_MTD_CFI_I8=yCONFIG_MTD_OTP=yCONFIG_MTD_CFI_INTELEXT=yCONFIG_MTD_CFI_AMDSTD=yCONFIG_MTD_CFI_STAA=yCONFIG_MTD_CFI_UTIL=yCONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not setCONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_NETSC520 is not set
# CONFIG_MTD_TS5500 is not setCONFIG_MTD_SBC_GXX=yCONFIG_MTD_AMD76XROM=yCONFIG_MTD_ICHXROM=yCONFIG_MTD_ESB2ROM=yCONFIG_MTD_CK804XROM=yCONFIG_MTD_SCB2_FLASH=y
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not setCONFIG_MTD_PCI=yCONFIG_MTD_GPIO_ADDR=yCONFIG_MTD_INTEL_VR_NOR=yCONFIG_MTD_PLATRAM=y
# CONFIG_MTD_LATCH_ADDR is not set
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=yCONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not setCONFIG_MTD_PHRAM=yCONFIG_MTD_MTDRAM=yCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTDRAM_ABS_POS=0CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOCG3=yCONFIG_BCH_CONST_M=14CONFIG_BCH_CONST_T=4
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#CONFIG_MTD_LPDDR=yCONFIG_MTD_QINFO_PROBE=yCONFIG_MTD_UBI=yCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not setCONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected #
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=y
# CONFIG_AD525X_DPOT is not setCONFIG_PHANTOM=y
# CONFIG_INTEL_MID_PTI is not setCONFIG_SGI_IOC4=yCONFIG_ENCLOSURE_SERVICES=yCONFIG_CS5535_MFGPT=yCONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
# CONFIG_CS5535_CLOCK_EVENT_SRC is not setCONFIG_HP_ILO=y
# CONFIG_APDS9802ALS is not setCONFIG_ISL29003=y
# CONFIG_ISL29020 is not setCONFIG_SENSORS_TSL2550=yCONFIG_SENSORS_BH1780=yCONFIG_SENSORS_BH1770=y
# CONFIG_SENSORS_APDS990X is not setCONFIG_HMC6352=yCONFIG_VMWARE_BALLOON=y
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not setCONFIG_USB_SWITCH_FSA9480=y
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not setCONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #
# CONFIG_TI_ST is not set CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#CONFIG_ALTERA_STAPL=yCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_NETLINK=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not setCONFIG_SCSI_ENCLOSURE=y
# CONFIG_SCSI_MULTI_LUN is not setCONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not setCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not setCONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not setCONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=yCONFIG_SCSI_DH_HP_SW=yCONFIG_SCSI_DH_EMC=yCONFIG_SCSI_OSD_INITIATOR=yCONFIG_SCSI_OSD_ULD=yCONFIG_SCSI_OSD_DPRINT_SENSE=1CONFIG_SCSI_OSD_DEBUG=yCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=yCONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not setCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_PDC_ADMA=yCONFIG_SATA_QSTOR=y
# CONFIG_ATA_BMDMA is not set
#
# PIO-only SFF controllers
#CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not setCONFIG_PATA_PLATFORM=yCONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#CONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=yCONFIG_MD_RAID0=yCONFIG_MD_RAID1=yCONFIG_MD_RAID10=yCONFIG_MD_RAID456=yCONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=yCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=yCONFIG_DM_SNAPSHOT=yCONFIG_DM_MIRROR=yCONFIG_DM_RAID=yCONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not setCONFIG_DM_UEVENT=yCONFIG_TARGET_CORE=yCONFIG_TCM_IBLOCK=yCONFIG_TCM_FILEIO=y
# CONFIG_TCM_PSCSI is not set
# CONFIG_LOOPBACK_TARGET is not setCONFIG_ISCSI_TARGET=yCONFIG_FUSION=y
# CONFIG_FUSION_SPI is not setCONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not setCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_SBP2=y
# CONFIG_FIREWIRE_NET is not setCONFIG_FIREWIRE_NOSY=yCONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
# CONFIG_I2O_CONFIG is not setCONFIG_I2O_BUS=yCONFIG_I2O_BLOCK=yCONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_NETDEVICES=yCONFIG_NET_CORE=yCONFIG_BONDING=yCONFIG_DUMMY=yCONFIG_EQUALIZER=y
# CONFIG_NET_FC is not setCONFIG_MII=yCONFIG_IFB=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not setCONFIG_RIONET=yCONFIG_RIONET_TX_SIZE=128CONFIG_RIONET_RX_SIZE=128CONFIG_TUN=y
# CONFIG_VETH is not setCONFIG_SUNGEM_PHY=yCONFIG_ARCNET=y
# CONFIG_ARCNET_1201 is not setCONFIG_ARCNET_1051=yCONFIG_ARCNET_RAW=yCONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
# CONFIG_ARCNET_COM90xxIO is not set
# CONFIG_ARCNET_RIM_I is not set
# CONFIG_ARCNET_COM20020 is not set
# CONFIG_ATM_DRIVERS is not set
#
# CAIF transport drivers
#CONFIG_CAIF_TTY=yCONFIG_CAIF_SPI_SLAVE=yCONFIG_CAIF_SPI_SYNC=yCONFIG_CAIF_HSI=yCONFIG_ETHERNET=yCONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not setCONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not setCONFIG_PCNET32=yCONFIG_NET_VENDOR_ATHEROS=yCONFIG_ATL2=yCONFIG_ATL1=yCONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not setCONFIG_BNX2=yCONFIG_CNIC=y
# CONFIG_TIGON3 is not setCONFIG_BNX2X=y
# CONFIG_NET_VENDOR_BROCADE is not setCONFIG_NET_CALXEDA_XGMAC=yCONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not setCONFIG_CHELSIO_T4=yCONFIG_CHELSIO_T4VF=y
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not setCONFIG_NET_VENDOR_DEC=yCONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not setCONFIG_DE4X5=y
# CONFIG_WINBOND_840 is not setCONFIG_DM9102=yCONFIG_ULI526X=y
# CONFIG_PCMCIA_XIRCOM is not setCONFIG_NET_VENDOR_DLINK=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not setCONFIG_DL2K=y
# CONFIG_SUNDANCE is not setCONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not setCONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not setCONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not setCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=yCONFIG_MLX4_CORE=y
# CONFIG_MLX4_DEBUG is not setCONFIG_NET_VENDOR_MICREL=yCONFIG_KS8842=yCONFIG_KS8851_MLL=yCONFIG_KSZ884X_PCI=y
# CONFIG_NET_VENDOR_MYRI is not setCONFIG_FEALNX=yCONFIG_NET_VENDOR_NATSEMI=yCONFIG_NATSEMI=y
# CONFIG_NS83820 is not set
# CONFIG_NET_VENDOR_8390 is not set
# CONFIG_NET_VENDOR_NVIDIA is not setCONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not setCONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not setCONFIG_NET_VENDOR_QLOGIC=yCONFIG_QLA3XXX=yCONFIG_QLCNIC=yCONFIG_QLGE=yCONFIG_NETXEN_NIC=y
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RDC is not setCONFIG_NET_VENDOR_SIS=yCONFIG_SIS900=yCONFIG_SIS190=yCONFIG_SFC=yCONFIG_SFC_MTD=y
# CONFIG_SFC_MCDI_MON is not setCONFIG_SFC_SRIOV=y
# CONFIG_NET_VENDOR_SMSC is not setCONFIG_NET_VENDOR_STMICRO=yCONFIG_STMMAC_ETH=y
# CONFIG_STMMAC_PLATFORM is not setCONFIG_STMMAC_DEBUG_FS=yCONFIG_STMMAC_DA=yCONFIG_STMMAC_RING=y
# CONFIG_STMMAC_CHAINED is not setCONFIG_NET_VENDOR_SUN=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NIU=y
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not setCONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_NET_SB1000 is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_AMD_PHY=yCONFIG_MARVELL_PHY=yCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not setCONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not setCONFIG_BROADCOM_PHY=yCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not setCONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=yCONFIG_MICREL_PHY=y
# CONFIG_FIXED_PHY is not setCONFIG_MDIO_BITBANG=yCONFIG_MDIO_GPIO=y
# CONFIG_PLIP is not setCONFIG_PPP=yCONFIG_PPP_BSDCOMP=yCONFIG_PPP_DEFLATE=y
# CONFIG_PPP_FILTER is not setCONFIG_PPPOATM=yCONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not setCONFIG_SLHC=y
#
# USB Network Adapters
#CONFIG_USB_KAWETH=y
# CONFIG_USB_PEGASUS is not setCONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not setCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_CDC_NCM=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC75XX=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_MCS7830 is not setCONFIG_USB_NET_CDC_SUBSET=y
# CONFIG_USB_ALI_M5632 is not setCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not setCONFIG_USB_NET_ZAURUS=yCONFIG_USB_NET_CX82310_ETH=y
# CONFIG_USB_NET_KALMIA is not setCONFIG_USB_NET_QMI_WWAN=y
# CONFIG_USB_HSO is not setCONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not setCONFIG_USB_IPHETH=yCONFIG_USB_SIERRA_NET=yCONFIG_USB_VL600=yCONFIG_WLAN=y
# CONFIG_ATMEL is not set
# CONFIG_USB_ZD1201 is not setCONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not set
# CONFIG_HOSTAP_PCI is not setCONFIG_WL_TI=y
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=yCONFIG_WIMAX_I2400M_USB=y
# CONFIG_WIMAX_I2400M_SDIO is not setCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
# CONFIG_WAN is not setCONFIG_VMXNET3=y
# CONFIG_ISDN is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=yCONFIG_INPUT_SPARSEKMAP=yCONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not setCONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5588=yCONFIG_KEYBOARD_ADP5589=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_LKKBD is not setCONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_GPIO_POLLED is not setCONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_TCA8418 is not setCONFIG_KEYBOARD_MATRIX=yCONFIG_KEYBOARD_LM8323=yCONFIG_KEYBOARD_LM8333=yCONFIG_KEYBOARD_MAX7359=yCONFIG_KEYBOARD_MCS=y
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not setCONFIG_KEYBOARD_TC3589X=yCONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=yCONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_HANWANG is not setCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_88PM860X=yCONFIG_TOUCHSCREEN_AD7879=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not setCONFIG_TOUCHSCREEN_ATMEL_MXT=yCONFIG_TOUCHSCREEN_AUO_PIXCIR=y
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not setCONFIG_TOUCHSCREEN_CYTTSP_CORE=yCONFIG_TOUCHSCREEN_CYTTSP_I2C=yCONFIG_TOUCHSCREEN_DYNAPRO=yCONFIG_TOUCHSCREEN_HAMPSHIRE=yCONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_EGALAX is not setCONFIG_TOUCHSCREEN_FUJITSU=yCONFIG_TOUCHSCREEN_ILI210X=yCONFIG_TOUCHSCREEN_GUNZE=yCONFIG_TOUCHSCREEN_ELO=yCONFIG_TOUCHSCREEN_WACOM_W8001=y
# CONFIG_TOUCHSCREEN_WACOM_I2C is not setCONFIG_TOUCHSCREEN_MAX11801=y
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not setCONFIG_TOUCHSCREEN_INEXIO=yCONFIG_TOUCHSCREEN_MK712=yCONFIG_TOUCHSCREEN_PENMOUNT=yCONFIG_TOUCHSCREEN_TOUCHRIGHT=yCONFIG_TOUCHSCREEN_TOUCHWIN=yCONFIG_TOUCHSCREEN_PIXCIR=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=yCONFIG_TOUCHSCREEN_MC13783=y
# CONFIG_TOUCHSCREEN_USB_EGALAX is not setCONFIG_TOUCHSCREEN_USB_PANJIT=y
# CONFIG_TOUCHSCREEN_USB_3M is not setCONFIG_TOUCHSCREEN_USB_ITM=y
# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
# CONFIG_TOUCHSCREEN_USB_GUNZE is not setCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=y
# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not setCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
# CONFIG_TOUCHSCREEN_USB_JASTEC is not setCONFIG_TOUCHSCREEN_USB_ELO=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_USB_ZYTRONIC=yCONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
# CONFIG_TOUCHSCREEN_USB_NEXIO is not setCONFIG_TOUCHSCREEN_USB_EASYTOUCH=yCONFIG_TOUCHSCREEN_TOUCHIT213=yCONFIG_TOUCHSCREEN_TSC_SERIO=yCONFIG_TOUCHSCREEN_TSC2007=yCONFIG_TOUCHSCREEN_ST1232=yCONFIG_TOUCHSCREEN_TPS6507X=y
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not setCONFIG_SERIO_CT82C710=yCONFIG_SERIO_PARKBD=yCONFIG_SERIO_PCIPS2=yCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_TRACE_ROUTER=yCONFIG_TRACE_SINK=yCONFIG_DEVKMEM=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not setCONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not setCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not setCONFIG_SERIAL_ALTERA_JTAGUART=yCONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=yCONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not setCONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_VIA=yCONFIG_HW_RANDOM_VIRTIO=yCONFIG_NVRAM=yCONFIG_R3964=yCONFIG_APPLICOM=yCONFIG_MWAVE=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not setCONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_HELPER_AUTO is not setCONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=yCONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not setCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_DESIGNWARE_PCI=y
# CONFIG_I2C_EG20T is not setCONFIG_I2C_GPIO=y
# CONFIG_I2C_INTEL_MID is not set CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not setCONFIG_I2C_PARPORT=yCONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options. #CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_GENERIC=yCONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not setCONFIG_GPIO_ICH=y
# CONFIG_GPIO_VX855 is not set
#
# I2C GPIO expanders:
#CONFIG_GPIO_MAX7300=yCONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not setCONFIG_GPIO_PCA953X=yCONFIG_GPIO_PCA953X_IRQ=yCONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_RC5T583 is not set
# CONFIG_GPIO_SX150X is not setCONFIG_GPIO_TC3589X=y
# CONFIG_GPIO_TPS65912 is not setCONFIG_GPIO_WM8994=yCONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
#
# PCI GPIO expanders:
#CONFIG_GPIO_CS5535=yCONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not setCONFIG_GPIO_ML_IOH=yCONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#CONFIG_GPIO_JANZ_TTL=y
# CONFIG_GPIO_TPS65910 is not setCONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not setCONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not setCONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not setCONFIG_W1_SLAVE_DS2423=y
# CONFIG_W1_SLAVE_DS2431 is not set
# CONFIG_W1_SLAVE_DS2433 is not setCONFIG_W1_SLAVE_DS2760=yCONFIG_W1_SLAVE_DS2780=y
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_BQ27000 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=y
# CONFIG_TEST_POWER is not setCONFIG_BATTERY_DS2760=yCONFIG_BATTERY_DS2780=y
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not setCONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not setCONFIG_BATTERY_MAX17040=yCONFIG_BATTERY_MAX17042=y
# CONFIG_CHARGER_ISP1704 is not set
# CONFIG_CHARGER_MAX8903 is not setCONFIG_CHARGER_LP8727=yCONFIG_CHARGER_GPIO=y
# CONFIG_CHARGER_SMB347 is not setCONFIG_HWMON=yCONFIG_HWMON_VID=yCONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not setCONFIG_SENSORS_ADM1026=yCONFIG_SENSORS_ADM1029=yCONFIG_SENSORS_ADM1031=yCONFIG_SENSORS_ADM9240=y
# CONFIG_SENSORS_ADT7475 is not setCONFIG_SENSORS_ASC7621=yCONFIG_SENSORS_K10TEMP=yCONFIG_SENSORS_FAM15H_POWER=y
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not setCONFIG_SENSORS_F71882FG=yCONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_FSCHMD is not setCONFIG_SENSORS_G760A=yCONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not setCONFIG_SENSORS_GPIO_FAN=yCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not setCONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not setCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not setCONFIG_SENSORS_LM85=yCONFIG_SENSORS_LM87=yCONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not setCONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LM95241 is not setCONFIG_SENSORS_MAX16065=yCONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_PC87360 is not setCONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not setCONFIG_SENSORS_SHT15=y
# CONFIG_SENSORS_SHT21 is not setCONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_EMC1403 is not setCONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not setCONFIG_SENSORS_SMSC47M1=yCONFIG_SENSORS_SMSC47M192=yCONFIG_SENSORS_SCH56XX_COMMON=yCONFIG_SENSORS_SCH5627=yCONFIG_SENSORS_SCH5636=yCONFIG_SENSORS_ADS1015=yCONFIG_SENSORS_ADS7828=yCONFIG_SENSORS_THMC50=yCONFIG_SENSORS_VIA_CPUTEMP=yCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=yCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83627HF=yCONFIG_SENSORS_W83627EHF=yCONFIG_SENSORS_APPLESMC=yCONFIG_SENSORS_MC13783_ADC=y
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not setCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=yCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not setCONFIG_SP5100_TCO=yCONFIG_GEODE_WDT=y
# CONFIG_SC520_WDT is not setCONFIG_SBC_FITPC2_WATCHDOG=y
# CONFIG_EUROTECH_WDT is not setCONFIG_IB700_WDT=y
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not setCONFIG_I6300ESB_WDT=yCONFIG_IE6XX_WDT=yCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=yCONFIG_HP_WATCHDOG=yCONFIG_HPWDT_NMI_DECODING=yCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=yCONFIG_NV_TCO=yCONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not setCONFIG_SMSC_SCH311X_WDT=y
# CONFIG_SMSC37B787_WDT is not setCONFIG_VIA_WDT=yCONFIG_W83627HF_WDT=y
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not setCONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not setCONFIG_MACHZ_WDT=y
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not setCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=yCONFIG_SSB_SILENT=yCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=yCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_88PM860X=yCONFIG_MFD_SM501=yCONFIG_MFD_SM501_GPIO=yCONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not setCONFIG_MFD_LM3533=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not setCONFIG_TPS6507X=y
# CONFIG_MFD_TPS65217 is not setCONFIG_MFD_TPS65910=yCONFIG_MFD_TPS65912=yCONFIG_MFD_TPS65912_I2C=y
# CONFIG_TWL4030_CORE is not setCONFIG_TWL6040_CORE=y
# CONFIG_MFD_STMPE is not setCONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not setCONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not setCONFIG_MFD_MAX8998=y
# CONFIG_MFD_S5M_CORE is not setCONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not setCONFIG_MFD_WM8994=y
# CONFIG_MFD_PCF50633 is not setCONFIG_MFD_MC13783=yCONFIG_MFD_MC13XXX=yCONFIG_MFD_MC13XXX_I2C=y
# CONFIG_ABX500_CORE is not setCONFIG_MFD_CS5535=y
# CONFIG_MFD_TIMBERDALE is not setCONFIG_LPC_SCH=yCONFIG_LPC_ICH=yCONFIG_MFD_RDC321X=yCONFIG_MFD_JANZ_CMODIO=y
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_AAT2870_CORE is not setCONFIG_MFD_RC5T583=yCONFIG_MFD_PALMAS=y
# CONFIG_REGULATOR is not setCONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not setCONFIG_DVB_CORE=yCONFIG_DVB_NET=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=yCONFIG_RC_CORE=yCONFIG_LIRC=yCONFIG_RC_MAP=yCONFIG_IR_NEC_DECODER=yCONFIG_IR_RC5_DECODER=yCONFIG_IR_RC6_DECODER=yCONFIG_IR_JVC_DECODER=yCONFIG_IR_SONY_DECODER=yCONFIG_IR_RC5_SZ_DECODER=yCONFIG_IR_SANYO_DECODER=yCONFIG_IR_MCE_KBD_DECODER=yCONFIG_IR_LIRC_CODEC=yCONFIG_RC_ATI_REMOTE=y
# CONFIG_IR_ENE is not setCONFIG_IR_IMON=yCONFIG_IR_MCEUSB=y
# CONFIG_IR_ITE_CIR is not set
# CONFIG_IR_FINTEK is not set
# CONFIG_IR_NUVOTON is not setCONFIG_IR_REDRAT3=yCONFIG_IR_STREAMZAP=y
# CONFIG_IR_WINBOND_CIR is not setCONFIG_RC_LOOPBACK=y
# CONFIG_IR_GPIO_CIR is not setCONFIG_MEDIA_TUNER=yCONFIG_MEDIA_TUNER_CUSTOMISE=y
#
# Customize TV tuners
#CONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5767=yCONFIG_MEDIA_TUNER_MT20XX=yCONFIG_MEDIA_TUNER_MT2060=yCONFIG_MEDIA_TUNER_MT2063=yCONFIG_MEDIA_TUNER_MT2266=yCONFIG_MEDIA_TUNER_MT2131=yCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_XC4000=yCONFIG_MEDIA_TUNER_MXL5005S=yCONFIG_MEDIA_TUNER_MXL5007T=yCONFIG_MEDIA_TUNER_MC44S803=yCONFIG_MEDIA_TUNER_MAX2165=yCONFIG_MEDIA_TUNER_TDA18218=yCONFIG_MEDIA_TUNER_FC0011=yCONFIG_MEDIA_TUNER_FC0012=yCONFIG_MEDIA_TUNER_FC0013=yCONFIG_MEDIA_TUNER_TDA18212=yCONFIG_MEDIA_TUNER_TUA9001=yCONFIG_DVB_MAX_ADAPTERS=8
# CONFIG_DVB_DYNAMIC_MINORS is not setCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=yCONFIG_DVB_BUDGET_CORE=yCONFIG_DVB_BUDGET=y
# CONFIG_DVB_BUDGET_CI is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not setCONFIG_DVB_TTUSB_BUDGET=yCONFIG_DVB_TTUSB_DEC=yCONFIG_SMS_SIANO_MDTV=y
#
# Siano module components
#CONFIG_SMS_USB_DRV=y
# CONFIG_SMS_SDIO_DRV is not set
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=y
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not setCONFIG_DVB_B2C2_FLEXCOP_USB=yCONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=y
#
# Supported SDMC DM1105 Adapters
#CONFIG_DVB_DM1105=y
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=yCONFIG_DVB_FIREDTV_INPUT=y
#
# Supported Earthsoft PT1 Adapters
#CONFIG_DVB_PT1=y
#
# Supported Mantis Adapters
#
# CONFIG_MANTIS_CORE is not set
#
# Supported nGene Adapters
#CONFIG_DVB_NGENE=y
#
# Supported ddbridge ('Octopus') Adapters
#CONFIG_DVB_DDBRIDGE=y
#
# Supported DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=yCONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=yCONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=yCONFIG_DVB_CX24123=yCONFIG_DVB_MT312=yCONFIG_DVB_ZL10036=yCONFIG_DVB_ZL10039=yCONFIG_DVB_S5H1420=yCONFIG_DVB_STV0288=yCONFIG_DVB_STB6000=yCONFIG_DVB_STV0299=yCONFIG_DVB_STV6110=yCONFIG_DVB_STV0900=yCONFIG_DVB_TDA8083=yCONFIG_DVB_TDA10086=yCONFIG_DVB_TDA8261=yCONFIG_DVB_VES1X93=yCONFIG_DVB_TUNER_ITD1000=yCONFIG_DVB_TUNER_CX24113=yCONFIG_DVB_TDA826X=yCONFIG_DVB_TUA6100=yCONFIG_DVB_CX24116=yCONFIG_DVB_SI21XX=yCONFIG_DVB_DS3000=yCONFIG_DVB_MB86A16=yCONFIG_DVB_TDA10071=y
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=yCONFIG_DVB_SP887X=yCONFIG_DVB_CX22700=yCONFIG_DVB_CX22702=yCONFIG_DVB_S5H1432=yCONFIG_DVB_DRXD=yCONFIG_DVB_L64781=yCONFIG_DVB_TDA1004X=yCONFIG_DVB_NXT6000=yCONFIG_DVB_MT352=yCONFIG_DVB_ZL10353=yCONFIG_DVB_DIB3000MB=yCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=yCONFIG_DVB_DIB9000=yCONFIG_DVB_TDA10048=yCONFIG_DVB_AF9013=yCONFIG_DVB_EC100=yCONFIG_DVB_HD29L2=yCONFIG_DVB_STV0367=yCONFIG_DVB_CXD2820R=yCONFIG_DVB_RTL2830=y
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=yCONFIG_DVB_TDA10021=yCONFIG_DVB_TDA10023=yCONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=yCONFIG_DVB_OR51211=yCONFIG_DVB_OR51132=yCONFIG_DVB_BCM3510=yCONFIG_DVB_LGDT330X=yCONFIG_DVB_LGDT3305=yCONFIG_DVB_LG2160=yCONFIG_DVB_S5H1409=yCONFIG_DVB_AU8522=yCONFIG_DVB_AU8522_DTV=yCONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#CONFIG_DVB_S921=yCONFIG_DVB_DIB8000=yCONFIG_DVB_MB86A20S=y
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=yCONFIG_DVB_TUNER_DIB0070=yCONFIG_DVB_TUNER_DIB0090=y
#
# SEC control devices for DVB-S
#CONFIG_DVB_LNBP21=yCONFIG_DVB_LNBP22=yCONFIG_DVB_ISL6405=yCONFIG_DVB_ISL6421=yCONFIG_DVB_ISL6423=yCONFIG_DVB_A8293=yCONFIG_DVB_LGS8GL5=yCONFIG_DVB_LGS8GXX=yCONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=yCONFIG_DVB_IX2505V=yCONFIG_DVB_IT913X_FE=yCONFIG_DVB_M88RS2000=yCONFIG_DVB_AF9033=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
# CONFIG_AGP is not setCONFIG_VGA_ARB=yCONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not setCONFIG_DRM=yCONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not setCONFIG_DRM_TTM=yCONFIG_DRM_TDFX=yCONFIG_DRM_R128=y
# CONFIG_DRM_RADEON is not setCONFIG_DRM_NOUVEAU=yCONFIG_DRM_NOUVEAU_BACKLIGHT=yCONFIG_DRM_NOUVEAU_DEBUG=y
#
# I2C encoder or helper chips
#CONFIG_DRM_I2C_CH7006=yCONFIG_DRM_I2C_SIL164=yCONFIG_DRM_MGA=y
# CONFIG_DRM_VIA is not setCONFIG_DRM_SAVAGE=y
# CONFIG_DRM_VMWGFX is not set
# CONFIG_STUB_POULSBO is not setCONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not setCONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not setCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not setCONFIG_FB_SYS_FOPS=y
# CONFIG_FB_WMT_GE_ROPS is not setCONFIG_FB_DEFERRED_IO=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_CIRRUS=yCONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=y
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_ARC=yCONFIG_FB_ASILIANT=yCONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not setCONFIG_FB_UVESA=yCONFIG_FB_VESA=y
# CONFIG_FB_N411 is not setCONFIG_FB_HGA=yCONFIG_FB_S1D13XXX=yCONFIG_FB_NVIDIA=yCONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not setCONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not setCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not setCONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not setCONFIG_FB_RADEON=yCONFIG_FB_RADEON_I2C=yCONFIG_FB_RADEON_BACKLIGHT=yCONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not setCONFIG_FB_ATY=yCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not setCONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not setCONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
# CONFIG_FB_VIA_X_COMPATIBILITY is not setCONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not setCONFIG_FB_3DFX=yCONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not setCONFIG_FB_TRIDENT=yCONFIG_FB_ARK=yCONFIG_FB_CARMINE=yCONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SM501 is not setCONFIG_FB_SMSCUFX=yCONFIG_FB_UDL=y
# CONFIG_FB_VIRTUAL is not setCONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not setCONFIG_FB_BROADSHEET=yCONFIG_FB_AUO_K190X=yCONFIG_FB_AUO_K1900=yCONFIG_FB_AUO_K1901=y
# CONFIG_EXYNOS_VIDEO is not setCONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not setCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_LP855X is not setCONFIG_BACKLIGHT_OT200=yCONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not setCONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not setCONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SND is not set
# CONFIG_SOUND_PRIME is not setCONFIG_HID_SUPPORT=yCONFIG_HID=yCONFIG_HID_BATTERY_STRENGTH=yCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=yCONFIG_HID_PID=yCONFIG_USB_HIDDEV=y
#
# Special HID drivers
#CONFIG_HID_GENERIC=yCONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not setCONFIG_HID_AUREAL=yCONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not setCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=yCONFIG_HID_DRAGONRISE=yCONFIG_DRAGONRISE_FF=y
# CONFIG_HID_EMS_FF is not setCONFIG_HID_EZKEY=yCONFIG_HID_HOLTEK=yCONFIG_HOLTEK_FF=yCONFIG_HID_KEYTOUCH=yCONFIG_HID_KYE=yCONFIG_HID_UCLOGIC=y
# CONFIG_HID_WALTOP is not setCONFIG_HID_GYRATION=yCONFIG_HID_TWINHAN=yCONFIG_HID_KENSINGTON=yCONFIG_HID_LCPOWER=yCONFIG_HID_LOGITECH=yCONFIG_HID_LOGITECH_DJ=yCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not setCONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not setCONFIG_HID_NTRIG=yCONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not setCONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not setCONFIG_HID_PRIMAX=yCONFIG_HID_ROCCAT=y
# CONFIG_HID_SAITEK is not setCONFIG_HID_SAMSUNG=y
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not setCONFIG_HID_SUNPLUS=yCONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not setCONFIG_HID_TIVO=yCONFIG_HID_TOPSEED=y
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not setCONFIG_HID_ZYDACRON=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB_ARCH_HAS_XHCI=yCONFIG_USB_SUPPORT=yCONFIG_USB_COMMON=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_DWC3=yCONFIG_USB_DWC3_DEBUG=y
# CONFIG_USB_DWC3_VERBOSE is not set
# CONFIG_USB_MON is not setCONFIG_USB_WUSB_CBAF=yCONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not setCONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not setCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_ISP1362_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not setCONFIG_USB_U132_HCD=yCONFIG_USB_SL811_HCD=yCONFIG_USB_SL811_HCD_ISO=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_RENESAS_USBHS_HCD is not setCONFIG_USB_MUSB_HDRC=yCONFIG_USB_MUSB_TUSB6010=yCONFIG_MUSB_PIO_ONLY=y
# CONFIG_USB_CHIPIDEA is not setCONFIG_USB_RENESAS_USBHS=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not setCONFIG_USB_WDM=yCONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_STORAGE_ENE_UB6250=y CONFIG_USB_UAS=y # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#CONFIG_USB_USS720=yCONFIG_USB_SERIAL=yCONFIG_USB_SERIAL_CONSOLE=yCONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not setCONFIG_USB_SERIAL_AIRCABLE=yCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not setCONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=y
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not setCONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not setCONFIG_USB_SERIAL_IUU=yCONFIG_USB_SERIAL_KEYSPAN_PDA=y
# CONFIG_USB_SERIAL_KEYSPAN is not setCONFIG_USB_SERIAL_KLSI=y
# CONFIG_USB_SERIAL_KOBIL_SCT is not setCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_METRO=yCONFIG_USB_SERIAL_MOS7720=y
# CONFIG_USB_SERIAL_MOS7715_PARPORT is not setCONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_MOTOROLA is not setCONFIG_USB_SERIAL_NAVMAN=y
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not setCONFIG_USB_SERIAL_QCAUX=yCONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not setCONFIG_USB_SERIAL_SIERRAWIRELESS=yCONFIG_USB_SERIAL_SYMBOL=yCONFIG_USB_SERIAL_TI=y
# CONFIG_USB_SERIAL_CYBERJACK is not setCONFIG_USB_SERIAL_XIRCOM=yCONFIG_USB_SERIAL_WWAN=yCONFIG_USB_SERIAL_OPTION=y
# CONFIG_USB_SERIAL_OMNINET is not setCONFIG_USB_SERIAL_OPTICON=y
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not setCONFIG_USB_ADUTUX=yCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=yCONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not setCONFIG_USB_IDMOUSE=yCONFIG_USB_FTDI_ELAN=yCONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not setCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=yCONFIG_USB_ISIGHTFW=y
# CONFIG_USB_YUREX is not set
#
# USB Physical Layer drivers
#
# CONFIG_USB_ISP1301 is not setCONFIG_USB_ATM=y
# CONFIG_USB_SPEEDTOUCH is not setCONFIG_USB_CXACRU=yCONFIG_USB_UEAGLEATM=yCONFIG_USB_XUSBATM=yCONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FS is not setCONFIG_USB_GADGET_VBUS_DRAW=2CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
#
# USB Peripheral Controller
#CONFIG_USB_R8A66597=y
# CONFIG_USB_RENESAS_USBHS_UDC is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not setCONFIG_USB_M66592=yCONFIG_USB_AMD5536UDC=yCONFIG_USB_NET2272=y
# CONFIG_USB_NET2272_DMA is not setCONFIG_USB_NET2280=y
# CONFIG_USB_GOKU is not setCONFIG_USB_EG20T=y
# CONFIG_USB_DUMMY_HCD is not setCONFIG_USB_GADGET_DUALSPEED=yCONFIG_USB_GADGET_SUPERSPEED=y
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_ACM_MS is not setCONFIG_USB_G_MULTI=yCONFIG_USB_G_MULTI_RNDIS=yCONFIG_USB_G_MULTI_CDC=y
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
#
# OTG and related infrastructure
#CONFIG_USB_OTG_UTILS=yCONFIG_USB_GPIO_VBUS=yCONFIG_NOP_USB_XCEIV=yCONFIG_MMC=yCONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not setCONFIG_SDIO_UART=yCONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not setCONFIG_MMC_SDHCI_PLTFM=yCONFIG_MMC_CB710=yCONFIG_MMC_VIA_SDMMC=y
# CONFIG_MMC_VUB300 is not setCONFIG_MMC_USHC=y
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#CONFIG_LEDS_88PM860X=yCONFIG_LEDS_LM3530=yCONFIG_LEDS_LM3533=y
# CONFIG_LEDS_GPIO is not setCONFIG_LEDS_LP3944=yCONFIG_LEDS_LP5521=y
# CONFIG_LEDS_LP5523 is not setCONFIG_LEDS_CLEVO_MAIL=yCONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA9633 is not setCONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not setCONFIG_LEDS_LT3593=y
# CONFIG_LEDS_DELL_NETBOOKS is not setCONFIG_LEDS_MC13783=y
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not setCONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not setCONFIG_LEDS_TRIGGER_BACKLIGHT=yCONFIG_LEDS_TRIGGER_GPIO=yCONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_ACCESSIBILITY=y # CONFIG_INFINIBAND is not set CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not setCONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not setCONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not setCONFIG_EDAC_I5000=y
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not setCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not setCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=yCONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#CONFIG_RTC_DRV_88PM860X=y
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not setCONFIG_RTC_DRV_DS1672=yCONFIG_RTC_DRV_DS3232=yCONFIG_RTC_DRV_MAX6900=yCONFIG_RTC_DRV_MAX8998=y
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not setCONFIG_RTC_DRV_ISL12022=yCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF8563=yCONFIG_RTC_DRV_PCF8583=yCONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not setCONFIG_RTC_DRV_BQ32K=y
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=yCONFIG_RTC_DRV_RX8581=y
# CONFIG_RTC_DRV_RX8025 is not setCONFIG_RTC_DRV_EM3027=yCONFIG_RTC_DRV_RV3029C2=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not setCONFIG_RTC_DRV_DS1553=y
# CONFIG_RTC_DRV_DS1742 is not setCONFIG_RTC_DRV_STK17TA8=yCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=yCONFIG_RTC_DRV_M48T59=yCONFIG_RTC_DRV_MSM6242=yCONFIG_RTC_DRV_BQ4802=yCONFIG_RTC_DRV_RP5C01=yCONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_MC13XXX is not setCONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#CONFIG_INTEL_MID_DMAC=yCONFIG_INTEL_IOATDMA=y
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not setCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not setCONFIG_DMATEST=yCONFIG_DCA=yCONFIG_AUXDISPLAY=yCONFIG_UIO=y
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not setCONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not setCONFIG_UIO_PCI_GENERIC=yCONFIG_UIO_NETX=yCONFIG_VIRTIO=yCONFIG_VIRTIO_RING=y
#
# Virtio drivers
#CONFIG_VIRTIO_BALLOON=y
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not setCONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not setCONFIG_MXM_WMI=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
#
# Hardware Spinlock drivers
#CONFIG_CLKEVT_I8253=yCONFIG_I8253_LOCK=yCONFIG_CLKBLD_I8253=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
#
# Rpmsg drivers (EXPERIMENTAL)
#CONFIG_VIRT_DRIVERS=yCONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not setCONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
#
# DEVFREQ Drivers
#
# CONFIG_EXTCON is not setCONFIG_MEMORY=yCONFIG_IIO=yCONFIG_IIO_BUFFER=yCONFIG_IIO_KFIFO_BUF=yCONFIG_IIO_TRIGGER=yCONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Analog to digital converters
#
#
# Amplifiers
#CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#CONFIG_VME_CA91CX42=yCONFIG_VME_TSI148=y
#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
#
# VME Device Drivers
#
#
# Firmware Drivers
#CONFIG_EDD=y
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=yCONFIG_EXT3_DEFAULTS_TO_ORDERED=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not setCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not setCONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not setCONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not setCONFIG_GFS2_FS=y
# CONFIG_OCFS2_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_FANOTIFY=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
# CONFIG_PRINT_QUOTA_WARNING is not setCONFIG_QUOTA_DEBUG=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not setCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
# CONFIG_PROC_FS is not setCONFIG_SYSFS=yCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not setCONFIG_JFFS2_FS=yCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=yCONFIG_JFFS2_FS_WBUF_VERIFY=yCONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
# CONFIG_JFFS2_LZO is not setCONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not setCONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not setCONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not setCONFIG_UBIFS_FS_LZO=yCONFIG_UBIFS_FS_ZLIB=yCONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not setCONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not setCONFIG_QNX4FS_FS=yCONFIG_QNX6FS_FS=yCONFIG_QNX6FS_DEBUG=yCONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not setCONFIG_ROMFS_BACKED_BY_MTD=y
# CONFIG_ROMFS_BACKED_BY_BOTH is not setCONFIG_ROMFS_ON_MTD=y
# CONFIG_PSTORE is not setCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_DEBUG=yCONFIG_EXOFS_FS=yCONFIG_EXOFS_DEBUG=yCONFIG_ORE=y
# CONFIG_NETWORK_FILESYSTEMS is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=y
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not setCONFIG_NLS_CODEPAGE_950=yCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=yCONFIG_NLS_ISO8859_8=yCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not setCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not setCONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=yCONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not setCONFIG_NLS_MAC_CENTEURO=yCONFIG_NLS_MAC_CROATIAN=yCONFIG_NLS_MAC_CYRILLIC=yCONFIG_NLS_MAC_GAELIC=y
# CONFIG_NLS_MAC_GREEK is not setCONFIG_NLS_MAC_ICELAND=yCONFIG_NLS_MAC_INUIT=yCONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not setCONFIG_NLS_UTF8=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not setCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not setCONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not setCONFIG_PANIC_ON_OOPS_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not setCONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
# CONFIG_DEBUG_OBJECTS_FREE is not setCONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not setCONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not setCONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not setCONFIG_RT_MUTEX_TESTER=yCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_PROVE_RCU=yCONFIG_PROVE_RCU_REPEATEDLY=y
# CONFIG_SPARSE_RCU_POINTER is not setCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=yCONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not setCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=yCONFIG_TEST_LIST_SORT=yCONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not setCONFIG_DEBUG_CREDENTIALS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_VERBOSE is not set
# CONFIG_RCU_CPU_STALL_INFO is not setCONFIG_RCU_TRACE=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not setCONFIG_DEBUG_PER_CPU_MAPS=yCONFIG_LKDTM=yCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_MAKE_REQUEST is not setCONFIG_FAIL_IO_TIMEOUT=yCONFIG_FAIL_MMC_REQUEST=yCONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_SYSCALL_TRACEPOINTS=yCONFIG_HAVE_C_RECORDMCOUNT=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_EVENT_TRACING=yCONFIG_EVENT_POWER_TRACING_DEPRECATED=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_RING_BUFFER_ALLOW_SWAP=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not setCONFIG_IRQSOFF_TRACER=yCONFIG_PREEMPT_TRACER=y
# CONFIG_SCHED_TRACER is not setCONFIG_FTRACE_SYSCALLS=yCONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not setCONFIG_PROFILE_ALL_BRANCHES=yCONFIG_TRACING_BRANCHES=yCONFIG_BRANCH_TRACER=yCONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not setCONFIG_UPROBE_EVENT=yCONFIG_PROBE_EVENTS=yCONFIG_DYNAMIC_FTRACE=yCONFIG_FUNCTION_PROFILER=yCONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not setCONFIG_MMIOTRACE=yCONFIG_RING_BUFFER_BENCHMARK=yCONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=yCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not setCONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not setCONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not setCONFIG_IOMMU_STRESS=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not setCONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=2
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not setCONFIG_DEBUG_NMI_SELFTEST=y
#
# Security options
#CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not setCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not setCONFIG_SECURITYFS=yCONFIG_DEFAULT_SECURITY_DAC=yCONFIG_DEFAULT_SECURITY=""CONFIG_XOR_BLOCKS=yCONFIG_ASYNC_CORE=yCONFIG_ASYNC_MEMCPY=yCONFIG_ASYNC_XOR=yCONFIG_ASYNC_PQ=yCONFIG_ASYNC_RAID6_RECOV=yCONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=yCONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_PCOMP=yCONFIG_CRYPTO_PCOMP2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not setCONFIG_CRYPTO_MANAGER_DISABLE_TESTS=yCONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not setCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=yCONFIG_CRYPTO_GHASH=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=yCONFIG_CRYPTO_RMD128=yCONFIG_CRYPTO_RMD160=y
# CONFIG_CRYPTO_RMD256 is not setCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA1_SSSE3=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not setCONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not setCONFIG_CRYPTO_ANUBIS=yCONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not setCONFIG_CRYPTO_BLOWFISH_COMMON=yCONFIG_CRYPTO_BLOWFISH_X86_64=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAMELLIA_X86_64=yCONFIG_CRYPTO_CAST5=yCONFIG_CRYPTO_CAST6=yCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=y
# CONFIG_CRYPTO_SEED is not setCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_SERPENT_SSE2_X86_64=yCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=yCONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_ZLIB=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_USER_API=yCONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not setCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not setCONFIG_CRYPTO_DEV_PADLOCK_SHA=yCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not setCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_RAID6_PQ=yCONFIG_BITREVERSE=yCONFIG_GENERIC_STRNCPY_FROM_USER=yCONFIG_GENERIC_STRNLEN_USER=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_PCI_IOMAP=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_IO=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not setCONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not setCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_XZ_DEC=yCONFIG_XZ_DEC_X86=yCONFIG_XZ_DEC_POWERPC=yCONFIG_XZ_DEC_IA64=y
# CONFIG_XZ_DEC_ARM is not setCONFIG_XZ_DEC_ARMTHUMB=yCONFIG_XZ_DEC_SPARC=yCONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not setCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_DECOMPRESS_XZ=yCONFIG_BCH=yCONFIG_BCH_CONST_PARAMS=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_CPU_RMAP=yCONFIG_DQL=yCONFIG_NLATTR=y
# CONFIG_AVERAGE is not setCONFIG_CORDIC=yCONFIG_DDR=y
_______________________________________________
LKP mailing list
[email protected]
Quoted 97 lines · Fengguang Wu
Hello,
This is an old BUG that still lives in linux-next.
[ 4.284620] device id = 2670 [ 4.286157] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.287060] ------------[ cut here ]------------ [ 4.287722] kernel BUG at include/linux/mtd/map.h:148! [ 4.288048] invalid opcode: 0000 [#1] PREEMPT SMP [ 4.288048] CPU 1 [ 4.288048] Pid: 1, comm: swapper/0 Not tainted 3.5.0-rc4-00162-g49099c4 #17 Bochs Bochs [ 4.288048] RIP: 0010:[<ffffffff8177e8de>] [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.288048] RSP: 0018:ffff880011049e20 EFLAGS: 00010246 [ 4.288048] RAX: 0000000000000000 RBX: ffffffff82a23550 RCX: 0000000000000000 [ 4.288048] RDX: ffff880011049e20 RSI: ffffffff82a23580 RDI: ffff880011049e80 [ 4.288048] RBP: ffff880011049e80 R08: 0000000000000003 R09: ffffffff810d6c93 [ 4.288048] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff82a23eb0 [ 4.288048] R13: ffffffff828790ce R14: 0000000000000000 R15: 0000000000000000 [ 4.288048] FS: 0000000000000000(0000) GS:ffff880012600000(0000) knlGS:0000000000000000 [ 4.288048] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.288048] CR2: 0000000000000000 CR3: 000000000298c000 CR4: 00000000000406e0 [ 4.288048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.288048] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.288048] Process swapper/0 (pid: 1, threadinfo ffff880011048000, task ffff880011040000) [ 4.288048] Stack: [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 4.288048] Call Trace: [ 4.288048] [<ffffffff81779e05>] cfi_probe+0x15/0x17 [ 4.288048] [<ffffffff81779d9b>] do_map_probe+0xa0/0xac [ 4.288048] [<ffffffff834d1aac>] ? physmap_init+0x12/0x12 [ 4.288048] [<ffffffff834d1bb0>] init_sbc_gxx+0x104/0x15b [ 4.288048] [<ffffffff8348d1b3>] do_one_initcall+0x86/0x208 [ 4.288048] [<ffffffff8348d442>] kernel_init+0x10d/0x1c2 [ 4.288048] [<ffffffff8348c739>] ? do_early_param+0xc3/0xc3 [ 4.288048] [<ffffffff8207b2f4>] kernel_thread_helper+0x4/0x10 [ 4.288048] [<ffffffff820797b4>] ? retint_restore_args+0x13/0x13 [ 4.288048] [<ffffffff8348d335>] ? do_one_initcall+0x208/0x208 [ 4.288048] [<ffffffff8207b2f0>] ? gs_change+0x13/0x13 [ 4.288048] Code: 83 c4 58 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 48 83 ec 60 66 66 66 66 90 31 c0 b9 18 00 00 00 48 8d 55 a0 48 89 d7 f3 ab <0f> 0b 55 48 89 e5 66 66 66 66 90 48 c7 c6 a0 39 a2 82 e8 cc ff [ 4.288048] RIP [<ffffffff8177e8de>] mtd_do_chip_probe+0x1d/0x1f [ 4.288048] RSP <ffff880011049e20> [ 4.321423] ---[ end trace 169195d5d1f9be6e ]--- [ 4.322118] swapper/0 (1) used greatest stack depth: 3768 bytes leftThis script may reproduce the error.
----------------------------------------------------------------------------
#!/bin/bashkernel=$1
initrd=quantal-core-x86_64.cgzwget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/initrd/$initrd
kvm=(
qemu-system-x86_64 -enable-kvm -cpu Haswell,+smep,+smap -kernel $kernel -initrd $initrd -m 320 -smp 2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -serial stdio -display none -monitor null)
append=(
hung_task_panic=1 earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=10 softlockup_panic=1 nmi_watchdog=panic prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw drbd.minor_count=8)
"${kvm[@]}" --append "${append[*]}"
----------------------------------------------------------------------------
Quoted 7 lines
Thanks,
Fengguang_______________________________________________
LKP mailing list
[email protected]
I am new , here and will try to trace your issue on linus's tree unless there is a major difference between Linus's tree and linux-next.
If there is please let me known before I start tracing this. Best Regards ,
Nick
Hi,
Quoted 11 lines · Nick Krause
Quoted 9 lines · Fengguang Wu
Hello,
This is an old BUG that still lives in linux-next.
[ 4.284620] device id = 2670 [ 4.286157] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.287060] ------------[ cut here ]------------ [ 4.287722] kernel BUG at include/linux/mtd/map.h:148! [ 4.288048] invalid opcode: 0000 [#1] PREEMPT SMP
Quoted 4 lines
I am new , here and will try to trace your issue on linus's tree unless there is a major difference between Linus's tree and linux-next.
If there is please let me known before I start tracing this.
This is a known issue, and Fengguang has reported this before:
http://lists.infradead.org/pipermail/linux-mtd/2014-March/053019.html
I'm still not quite sure how to solve this one. It seems to be a limitation of the kconfig language.
Brian
Quoted 19 lines · Brian Norris
Hi,
Quoted 11 lines · Nick Krause
Quoted 9 lines · Fengguang Wu
Hello,
This is an old BUG that still lives in linux-next.
[ 4.284620] device id = 2670 [ 4.286157] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff [ 4.287060] ------------[ cut here ]------------ [ 4.287722] kernel BUG at include/linux/mtd/map.h:148! [ 4.288048] invalid opcode: 0000 [#1] PREEMPT SMPQuoted 4 lines
I am new , here and will try to trace your issue on linus's tree unless there is a major difference between Linus's tree and linux-next.
If there is please let me known before I start tracing this.
Quoted 8 lines
This is a known issue, and Fengguang has reported this before:
http://lists.infradead.org/pipermail/linux-mtd/2014-March/053019.html
I'm still not quite sure how to solve this one. It seems to be a limitation of the kconfig language.
Brian
I am and banned from the lists but trying to get back on, if you want my help please
let me known. I will read this bug report first but just tell me if you want some help.
Cheers Nick
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/