usb: gadget: at91_udc: move prepare clk into process context

PATCH New Ronald Wahl 5 participants 5 messages Aug 8, 2014 – Aug 20, 2014

Subsystems (2)

USB Arm/Microchip (AT91) SoC support

lore

Share & tools

lore

Ronald Wahl

author

2014-08-08 09:42 UTC #0 lore raw

PATCH v4 1/1 usb: gadget: at91_udc: move prepare clk into process context

Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe).

Signed-off-by Ronald Wahl <[email protected]>

---
v3 -> v4:
- no code changes
- update commit message
- add changelog

v2 -> v3: (NOTE: this patch was also send with the v2 tag)
- moved setting the clock rate into process context as well as it may also sleep
- update commit message

v1 -> v2:
- no changes (first v2 got out accidently)

 drivers/usb/gadget/udc/at91_udc.c | 44 ++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 12 deletions(-)

drivers/usb/gadget/udc/at91_udc.c +32 ~~-12~~

index cfd18bc..0d685d0 100644
@@ -870,12 +870,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)

@@ -884,10 +882,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }
 
 /*

@@ -1780,14 +1778,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);

@@ -1795,7 +1803,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");

@@ -1848,6 +1856,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);

@@ -1896,6 +1911,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))

Signature · 1 line

1.9.3

Alexandre Belloni

2014-08-08 14:06 UTC #1 lore raw

PATCH v4 1/1 usb: gadget: at91_udc: move prepare clk into process context

Quoted 7 lines · Ronald Wahl

Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe).
Signed-off-by Ronald Wahl <[email protected]>

Acked-by Alexandre Belloni <[email protected]>

Quoted 122 lines

---
v3 -> v4:
- no code changes
- update commit message
- add changelog

v2 -> v3: (NOTE: this patch was also send with the v2 tag)
- moved setting the clock rate into process context as well as it may also sleep
- update commit message

v1 -> v2:
- no changes (first v2 got out accidently)

 drivers/usb/gadget/udc/at91_udc.c | 44 ++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 12 deletions(-)

drivers/usb/gadget/udc/at91_udc.c +32 ~~-12~~

index cfd18bc..0d685d0 100644
@@ -870,12 +870,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)

@@ -884,10 +882,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }
 
 /*

@@ -1780,14 +1778,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);

@@ -1795,7 +1803,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");

@@ -1848,6 +1856,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);

@@ -1896,6 +1911,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))

Signature · 7 lines

1.9.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Signature · 3 lines

Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Boris BREZILLON

2014-08-13 07:30 UTC #2 lore raw

PATCH v4 1/1 usb: gadget: at91_udc: move prepare clk into process context

In reply to Ronald Wahl

Quoted 7 lines · On Fri, 8 Aug 2014 11:42:42 +0200 Ronald Wahl <[email protected]> wrote:

Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe).
Signed-off-by Ronald Wahl <[email protected]>

Acked-by Boris Brezillon <[email protected]>

Quoted 114 lines

---
v3 -> v4:
- no code changes
- update commit message
- add changelog

v2 -> v3: (NOTE: this patch was also send with the v2 tag)
- moved setting the clock rate into process context as well as it may also sleep
- update commit message

v1 -> v2:
- no changes (first v2 got out accidently)

 drivers/usb/gadget/udc/at91_udc.c | 44 ++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 12 deletions(-)

drivers/usb/gadget/udc/at91_udc.c +32 ~~-12~~

index cfd18bc..0d685d0 100644
@@ -870,12 +870,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)

@@ -884,10 +882,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }
 
 /*

@@ -1780,14 +1778,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);

@@ -1795,7 +1803,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");

@@ -1848,6 +1856,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);

@@ -1896,6 +1911,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))

Signature · 3 lines

Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Nicolas Ferre

2014-08-13 08:56 UTC #3 lore raw

PATCH v4 1/1 usb: gadget: at91_udc: move prepare clk into process context

In reply to Ronald Wahl

On 08/08/2014 11:42, Ronald Wahl :

Quoted 7 lines

Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe).
Signed-off-by Ronald Wahl <[email protected]>

Acked-by Nicolas Ferre <[email protected]>

Quoted 115 lines

---
v3 -> v4:
- no code changes
- update commit message
- add changelog

v2 -> v3: (NOTE: this patch was also send with the v2 tag)
- moved setting the clock rate into process context as well as it may also sleep
- update commit message

v1 -> v2:
- no changes (first v2 got out accidently)

 drivers/usb/gadget/udc/at91_udc.c | 44 ++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 12 deletions(-)

drivers/usb/gadget/udc/at91_udc.c +32 ~~-12~~

index cfd18bc..0d685d0 100644
@@ -870,12 +870,10 @@ static void clk_on(struct at91_udc *udc)
 		return;
 	udc->clocked = 1;
 
-	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
-		clk_set_rate(udc->uclk, 48000000);
-		clk_prepare_enable(udc->uclk);
-	}
-	clk_prepare_enable(udc->iclk);
-	clk_prepare_enable(udc->fclk);
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_enable(udc->uclk);
+	clk_enable(udc->iclk);
+	clk_enable(udc->fclk);
 }
 
 static void clk_off(struct at91_udc *udc)

@@ -884,10 +882,10 @@ static void clk_off(struct at91_udc *udc)
 		return;
 	udc->clocked = 0;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	clk_disable_unprepare(udc->fclk);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->fclk);
+	clk_disable(udc->iclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))
-		clk_disable_unprepare(udc->uclk);
+		clk_disable(udc->uclk);
 }
 
 /*

@@ -1780,14 +1778,24 @@ static int at91udc_probe(struct platform_device *pdev)
 	}
 
 	/* don't do anything until we have both gadget driver and VBUS */
+	if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+		clk_set_rate(udc->uclk, 48000000);
+		retval = clk_prepare(udc->uclk);
+		if (retval)
+			goto fail1;
+	}
+	retval = clk_prepare(udc->fclk);
+	if (retval)
+		goto fail1a;
+
 	retval = clk_prepare_enable(udc->iclk);
 	if (retval)
-		goto fail1;
+		goto fail1b;
 	at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
 	at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
 	/* Clear all pending interrupts - UDP may be used by bootloader. */
 	at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
-	clk_disable_unprepare(udc->iclk);
+	clk_disable(udc->iclk);
 
 	/* request UDC and maybe VBUS irqs */
 	udc->udp_irq = platform_get_irq(pdev, 0);

@@ -1795,7 +1803,7 @@ static int at91udc_probe(struct platform_device *pdev)
 			0, driver_name, udc);
 	if (retval < 0) {
 		DBG("request irq %d failed\n", udc->udp_irq);
-		goto fail1;
+		goto fail1c;
 	}
 	if (gpio_is_valid(udc->board.vbus_pin)) {
 		retval = gpio_request(udc->board.vbus_pin, "udc_vbus");

@@ -1848,6 +1856,13 @@ fail3:
 		gpio_free(udc->board.vbus_pin);
 fail2:
 	free_irq(udc->udp_irq, udc);
+fail1c:
+	clk_unprepare(udc->iclk);
+fail1b:
+	clk_unprepare(udc->fclk);
+fail1a:
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
 fail1:
 	if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
 		clk_put(udc->uclk);

@@ -1896,6 +1911,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
+	if (IS_ENABLED(CONFIG_COMMON_CLK))
+		clk_unprepare(udc->uclk);
+	clk_unprepare(udc->fclk);
+	clk_unprepare(udc->iclk);
+
 	clk_put(udc->iclk);
 	clk_put(udc->fclk);
 	if (IS_ENABLED(CONFIG_COMMON_CLK))

Signature · 1 line

Nicolas Ferre

Felipe Balbi

2014-08-20 18:10 UTC #4 lore raw

PATCH v4 1/1 usb: gadget: at91_udc: move prepare clk into process context

In reply to Ronald Wahl

Hi,

Quoted 7 lines · Ronald Wahl

Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b (usb: gadget: at91_udc:
prepare clk before calling enable) added clock preparation in interrupt context. This is not allowed as it might sleep. Also setting the clock rate is unsafe to call from there for the same reason. Move clock preparation and setting clock rate into process context (at91udc_probe).
Signed-off-by Ronald Wahl <[email protected]>

do we need this for the -rc cycle ? Does it need to be backported to stable releases ?

Signature · 8 lines

balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140820/ae515790/attachment.sig>