ASoC: wm8994: Demux the microphone detection IRQ
Subsystems (3)
PATCH v2 1/1 ASoC: wm8994: Demux the microphone detection IRQ
Current code only allows direct routing of the WM8994 microphone detection signal to a GPIO this change adds support to demux the interrupt from the main interrupt line of the codec.
Signed-off-by Nikesh Oswal <[email protected]>
--- sound/soc/codecs/wm8994.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
sound/soc/codecs/wm8994.c +12 -6
@@ -4089,17 +4089,23 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)switch (control->type) {case WM8994 : -if (wm8994->micdet_irq) { +if (wm8994->micdet_irq) ret =request_threaded_irq (wm8994->micdet_irq,NULL , wm8994_mic_irq,IRQF_TRIGGER_RISING ,"Mic1 detect" , wm8994); -if (ret !=0 ) -dev_warn (codec->dev, -"Failed to request Mic1 detect IRQ: %d\n" , - ret); - } +else + ret =wm8994_request_irq (wm8994->wm8994, +WM8994_IRQ_MIC1_DET , + wm8994_mic_irq,"Mic 1 detect" , + wm8994); + +if (ret !=0 ) +dev_warn (codec->dev, +"Failed to request Mic1 detect IRQ: %d\n" , + ret); + ret = wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_MIC1_SHRT,
Signature · 1 line
1.7.9.5
Quoted 3 lines · Nikesh Oswal
Current code only allows direct routing of the WM8994 microphone detection signal to a GPIO this change adds support to demux the interrupt from the main interrupt line of the codec.
Applied, thanks.