Skip to contentSkip to conversation

mac80211: Replace rcu_dereference() with rcu_access_pointer()

PATCH Applied Andreea-Cristina Bernat 2 participants 2 messages Aug 17, 2014 – Aug 27, 2014

Subsystems (3)
Networking Network drivers mac80211
lore
Share & tools
lore

Andreea-Cristina Bernat

author
#0 lore raw

PATCH 1/1 mac80211: Replace rcu_dereference() with rcu_access_pointer()

The "rcu_dereference()" calls are used directly in conditions. Since their return values are never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacements.

The following Coccinelle semantic patch was used:
@@
@@

(
if(
(<+...
- rcu_dereference
+ rcu_access_pointer
(...)
...+>)) {...}
|
while(
(<+...
- rcu_dereference
+ rcu_access_pointer
(...)
...+>)) {...}
)

Signed-off-by Andreea-Cristina Bernat <[email protected]>
---
 net/mac80211/mesh_pathtbl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/mac80211/mesh_pathtbl.c +2 -2
index cf032a8..a6699dc 100644
@@ -729,7 +729,7 @@ void mesh_plink_broken(struct sta_info *sta)
 	tbl = rcu_dereference(mesh_paths);
 	for_each_mesh_entry(tbl, node, i) {
 		mpath = node->mpath;
-		if (rcu_dereference(mpath->next_hop) == sta &&
+		if (rcu_access_pointer(mpath->next_hop) == sta &&
 		    mpath->flags & MESH_PATH_ACTIVE &&
 		    !(mpath->flags & MESH_PATH_FIXED)) {
 			spin_lock_bh(&mpath->state_lock);

@@ -794,7 +794,7 @@ void mesh_path_flush_by_nexthop(struct sta_info *sta)
 	tbl = resize_dereference_mesh_paths();
 	for_each_mesh_entry(tbl, node, i) {
 		mpath = node->mpath;
-		if (rcu_dereference(mpath->next_hop) == sta) {
+		if (rcu_access_pointer(mpath->next_hop) == sta) {
 			spin_lock(&tbl->hashwlock[i]);
 			__mesh_path_del(tbl, node);
 			spin_unlock(&tbl->hashwlock[i]);
Signature · 6 lines
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
maintainer Applied
#1 lore raw
Quoted 4 lines · Andreea-Cristina Bernat

The "rcu_dereference()" calls are used directly in conditions. Since their return values are never dereferenced it is recommended to use "rcu_access_pointer()" instead of "rcu_dereference()". Therefore, this patch makes the replacements.

Applied, thanks.

johannes

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html