ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board
Subsystems (3)
PATCH v2 1/1 ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board
This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx1-ads.dts | 152 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 153 insertions(+) create mode 100644 arch/arm/boot/dts/imx1-ads.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -161,6 +161,7 @@ dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ + imx1-ads.dtb \ imx25-eukrea-mbimxsd25-baseboard.dtb \ imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
arch/arm/boot/dts/imx1-ads.dts new file +152 -0
152 lines not on this page · raw message
Signature · 1 line
1.8.5.5
Fabio Estevam
reviewerPATCH v2 1/1 ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board
Quoted 4 lines · Alexander Shiyan
This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board.
Signed-off-by Alexander Shiyan <[email protected]>
Looks good, only one minor comment:
Quoted 3 lines
+&iomuxc {
+ imx1-motorola-ads {
Should be imx1-ads instead.
Tue, 19 Aug 2014 10:29:08 -0300 ?? Fabio Estevam <[email protected]>:
Quoted 6 lines · Alexander Shiyan
Quoted 4 lines
This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board.
Signed-off-by Alexander Shiyan <[email protected]>
Quoted 7 lines
Looks good, only one minor comment:
Quoted 3 lines
+&iomuxc {
+ imx1-motorola-ads {Should be imx1-ads instead.
Ah, yes. Shawn, can this be fixed during apply?
---
PATCH v2 1/1 ARM: i.MX: dts: Add support for the Freescale i.MX1 ADS board
Quoted 10 lines · Alexander Shiyan
Tue, 19 Aug 2014 10:29:08 -0300 ?? Fabio Estevam <[email protected]>:
Quoted 9 lines · Alexander Shiyan
Quoted 4 lines
This patch adds support for the Freescale (Motorola) i.MX1 ADS board. This change is intended to further remove non-DT support for this board.
Signed-off-by Alexander Shiyan <[email protected]>Looks good, only one minor comment:
Quoted 1 line
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
+&iomuxc {
+ imx1-motorola-ads {Should be imx1-ads instead.
Ah, yes. Shawn, can this be fixed during apply?
Fixed and applied, thanks.