net: ec_bhf: remove excessive debug messages
Subsystems (3)
Dariusz Marcinkiewicz
maintainerPATCH v2 1/1 net: ec_bhf: remove excessive debug messages
This cuts down the number of debug information spit out by the driver.
Signed-off-by Dariusz Marcinkiewicz <[email protected]>
---
Changes since v1:
* as suggested by Dave Miller, I am simply ditching all debugfs stuff
drivers/net/ethernet/ec_bhf.c | 101 ++++------------------------------------- 1 file changed, 10 insertions(+), 91 deletions(-)
drivers/net/ethernet/ec_bhf.c +10 -91
@@ -1,5 +1,5 @@/* -* drivers/net/ethernet/beckhoff/ec_bhf.c +* drivers/net/ethernet/ec_bhf.c * * Copyright (C) 2014 Darek Marcinkiewicz <[email protected]> *
@@ -18,9 +18,6 @@* Those can be found on Bechhoff CX50xx industrial PCs. */ -#if 0 -#define DEBUG -#endif #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h>
@@ -74,6 +71,8 @@#define DMA_WINDOW_SIZE_MASK 0xfffffffc +#define ETHERCAT_MASTER_ID 0x14 +static struct pci_device_id ids[] = { {PCI_DEVICE (0x15ec ,0x5000 ), }, {0 , }
@@ -131,7 +130,6 @@ struct bhf_dma {struct ec_bhf_priv {struct net_device *net_dev; -struct pci_dev *dev;void __iomem *io;
@@ -162,32 +160,6 @@ struct ec_bhf_priv {#define PRIV_TO_DEV (priv) (&(priv)->dev->dev) -#define ETHERCAT_MASTER_ID 0x14 - -static void ec_bhf_print_status (struct ec_bhf_priv *priv) -{ -struct device *dev =PRIV_TO_DEV (priv); - -dev_dbg (dev,"Frame error counter: %d\n" , -ioread8 (priv->mac_io +MAC_FRAME_ERR_CNT )); -dev_dbg (dev,"RX error counter: %d\n" , -ioread8 (priv->mac_io +MAC_RX_ERR_CNT )); -dev_dbg (dev,"CRC error counter: %d\n" , -ioread8 (priv->mac_io +MAC_CRC_ERR_CNT )); -dev_dbg (dev,"TX frame counter: %d\n" , -ioread32 (priv->mac_io +MAC_TX_FRAME_CNT )); -dev_dbg (dev,"RX frame counter: %d\n" , -ioread32 (priv->mac_io +MAC_RX_FRAME_CNT )); -dev_dbg (dev,"TX fifo level: %d\n" , -ioread8 (priv->mac_io +MAC_TX_FIFO_LVL )); -dev_dbg (dev,"Dropped frames: %d\n" , -ioread8 (priv->mac_io +MAC_DROPPED_FRMS )); -dev_dbg (dev,"Connected with CCAT slot: %d\n" , -ioread8 (priv->mac_io +MAC_CONNECTED_CCAT_FLAG )); -dev_dbg (dev,"Link status: %d\n" , -ioread8 (priv->mii_io +MII_LINK_STATUS )); -} -static void ec_bhf_reset (struct ec_bhf_priv *priv) {iowrite8 (0 , priv->mac_io +MAC_FRAME_ERR_CNT );
@@ -210,8 +182,6 @@ static void ec_bhf_send_packet(struct ec_bhf_priv *priv, struct tx_desc *desc)u32 addr = (u8 *)desc - priv->tx_buf.buf;iowrite32 ((ALIGN (len,8 ) <<24 ) | addr, priv->fifo_io +FIFO_TX_REG ); - -dev_dbg (PRIV_TO_DEV (priv),"Done sending packet\n" ); }static int ec_bhf_desc_sent (struct tx_desc *desc)
@@ -244,7 +214,6 @@ static void ec_bhf_add_rx_desc(struct ec_bhf_priv *priv, struct rx_desc *desc)static void ec_bhf_process_rx (struct ec_bhf_priv *priv) {struct rx_desc *desc = &priv->rx_descs[priv->rx_dnext]; -struct device *dev =PRIV_TO_DEV (priv);while (ec_bhf_pkt_received (desc)) { int pkt_size = (le16_to_cpu(desc->header.len) &
@@ -253,20 +222,16 @@ static void ec_bhf_process_rx(struct ec_bhf_priv *priv)struct sk_buff *skb; skb =netdev_alloc_skb_ip_align (priv->net_dev, pkt_size); -dev_dbg (dev,"Received packet, size: %d\n" , pkt_size); -if (skb) {memcpy (skb_put (skb, pkt_size), data, pkt_size); skb->protocol =eth_type_trans (skb, priv->net_dev); -dev_dbg (dev,"Protocol type: %x\n" , skb->protocol); - priv->stat_rx_bytes += pkt_size;netif_rx (skb); }else { -dev_err_ratelimited (dev, -"Couldn't allocate a skb_buff for a packet of size %u\n" , - pkt_size); +dev_err_ratelimited (PRIV_TO_DEV (priv), +"Couldn't allocate a skb_buff for a packet of size %u\n" , + pkt_size); } desc->header.recv =0 ;
@@ -276,7 +241,6 @@ static void ec_bhf_process_rx(struct ec_bhf_priv *priv) priv->rx_dnext = (priv->rx_dnext +1 ) % priv->rx_dcount; desc = &priv->rx_descs[priv->rx_dnext]; } - }static enum hrtimer_restart ec_bhf_timer_fun (struct hrtimer *timer)
@@ -299,14 +263,7 @@ static int ec_bhf_setup_offsets(struct ec_bhf_priv *priv)unsigned block_count, i;void __iomem *ec_info; -dev_dbg (dev,"Info block:\n" ); -dev_dbg (dev,"Type of function: %x\n" , (unsigned )ioread16 (priv->io)); -dev_dbg (dev,"Revision of function: %x\n" , - (unsigned )ioread16 (priv->io +INFO_BLOCK_REV )); - block_count =ioread8 (priv->io +INFO_BLOCK_BLK_CNT ); -dev_dbg (dev,"Number of function blocks: %x\n" , block_count); -for (i =0 ; i < block_count; i++) {u16 type =ioread16 (priv->io + i *INFO_BLOCK_SIZE +INFO_BLOCK_TYPE );
@@ -317,29 +274,17 @@ static int ec_bhf_setup_offsets(struct ec_bhf_priv *priv)dev_err (dev,"EtherCAT master with DMA block not found\n" );return -ENODEV ; } -dev_dbg (dev,"EtherCAT master with DMA block found at pos: %d\n" , i); ec_info = priv->io + i *INFO_BLOCK_SIZE ; -dev_dbg (dev,"EtherCAT master revision: %d\n" , -ioread16 (ec_info +INFO_BLOCK_REV )); priv->tx_dma_chan =ioread8 (ec_info +INFO_BLOCK_TX_CHAN ); -dev_dbg (dev,"EtherCAT master tx dma channel: %d\n" , - priv->tx_dma_chan); - priv->rx_dma_chan =ioread8 (ec_info +INFO_BLOCK_RX_CHAN ); -dev_dbg (dev,"EtherCAT master rx dma channel: %d\n" , - priv->rx_dma_chan); priv->ec_io = priv->io +ioread32 (ec_info +INFO_BLOCK_OFFSET ); priv->mii_io = priv->ec_io +ioread32 (priv->ec_io +EC_MII_OFFSET ); priv->fifo_io = priv->ec_io +ioread32 (priv->ec_io +EC_FIFO_OFFSET ); priv->mac_io = priv->ec_io +ioread32 (priv->ec_io +EC_MAC_OFFSET ); -dev_dbg (dev, -"EtherCAT block addres: %p, fifo address: %p, mii address: %p, mac address: %p\n" , - priv->ec_io, priv->fifo_io, priv->mii_io, priv->mac_io); -return 0 ; }
@@ -350,8 +295,6 @@ static netdev_tx_t ec_bhf_start_xmit(struct sk_buff *skb,struct tx_desc *desc;unsigned len; -dev_dbg (PRIV_TO_DEV (priv),"Starting xmit\n" ); - desc = &priv->tx_descs[priv->tx_dnext];skb_copy_and_csum_dev (skb, desc->data);
@@ -366,15 +309,12 @@ static netdev_tx_t ec_bhf_start_xmit(struct sk_buff *skb, priv->tx_dnext = (priv->tx_dnext +1 ) % priv->tx_dcount;if (!ec_bhf_desc_sent (&priv->tx_descs[priv->tx_dnext])) { -/* Make sure that update updates to tx_dnext are perceived +/* Make sure that updates to tx_dnext are perceived * by timer routine. */ smp_wmb ();netif_stop_queue (net_dev); - -dev_dbg (PRIV_TO_DEV (priv),"Stopping netif queue\n" ); -ec_bhf_print_status (priv); } priv->stat_tx_bytes += len;
@@ -397,7 +337,6 @@ static int ec_bhf_alloc_dma_mem(struct ec_bhf_priv *priv, mask =ioread32 (priv->dma_io + offset); mask &=DMA_WINDOW_SIZE_MASK ; -dev_dbg (dev,"Read mask %x for channel %d\n" , mask, channel);/* We want to allocate a chunk of memory that is: * - aligned to the mask we just read
@@ -408,12 +347,10 @@ static int ec_bhf_alloc_dma_mem(struct ec_bhf_priv *priv, buf->len =min_t (int, ~mask +1 , size); buf->alloc_len =2 * buf->len; -dev_dbg (dev,"Allocating %d bytes for channel %d" , - (int )buf->alloc_len, channel); buf->alloc =dma_alloc_coherent (dev, buf->alloc_len, &buf->alloc_phys,GFP_KERNEL );if (buf->alloc ==NULL ) { -dev_info (dev,"Failed to allocate buffer\n" ); +dev_err (dev,"Failed to allocate buffer\n" );return -ENOMEM ; }
@@ -422,8 +359,6 @@ static int ec_bhf_alloc_dma_mem(struct ec_bhf_priv *priv,iowrite32 (0 , priv->dma_io + offset +4 );iowrite32 (buf->buf_phys, priv->dma_io + offset); -dev_dbg (dev,"Buffer: %x and read from dev: %x" , - (unsigned )buf->buf_phys,ioread32 (priv->dma_io + offset));return 0 ; }
@@ -433,7 +368,7 @@ static void ec_bhf_setup_tx_descs(struct ec_bhf_priv *priv)int i =0 ; priv->tx_dcount = priv->tx_buf.len /sizeof (struct tx_desc ); - priv->tx_descs = (struct tx_desc *) priv->tx_buf.buf; + priv->tx_descs = (struct tx_desc *)priv->tx_buf.buf; priv->tx_dnext =0 ;for (i =0 ; i < priv->tx_dcount; i++)
@@ -445,7 +380,7 @@ static void ec_bhf_setup_rx_descs(struct ec_bhf_priv *priv)int i; priv->rx_dcount = priv->rx_buf.len /sizeof (struct rx_desc ); - priv->rx_descs = (struct rx_desc *) priv->rx_buf.buf; + priv->rx_descs = (struct rx_desc *)priv->rx_buf.buf; priv->rx_dnext =0 ;for (i =0 ; i < priv->rx_dcount; i++) {
@@ -469,8 +404,6 @@ static int ec_bhf_open(struct net_device *net_dev)struct device *dev =PRIV_TO_DEV (priv);int err =0 ; -dev_info (dev,"Opening device\n" ); -ec_bhf_reset (priv); err = ec_bhf_alloc_dma_mem(priv, &priv->rx_buf, priv->rx_dma_chan,
@@ -481,20 +414,13 @@ static int ec_bhf_open(struct net_device *net_dev) }ec_bhf_setup_rx_descs (priv); -dev_info (dev,"RX buffer allocated, address: %x\n" , - (unsigned )priv->rx_buf.buf_phys); - err =ec_bhf_alloc_dma_mem (priv, &priv->tx_buf, priv->tx_dma_chan,FIFO_SIZE *sizeof (struct tx_desc ));if (err) {dev_err (dev,"Failed to allocate tx buffer\n" ); goto error_rx_free; } -dev_dbg (dev,"TX buffer allocated, addres: %x\n" , - (unsigned )priv->tx_buf.buf_phys); -iowrite8 (0 , priv->mii_io +MII_MAC_FILT_FLAG ); -ec_bhf_setup_tx_descs (priv);netif_start_queue (net_dev);
@@ -504,10 +430,6 @@ static int ec_bhf_open(struct net_device *net_dev)hrtimer_start (&priv->hrtimer,ktime_set (0 , polling_frequency),HRTIMER_MODE_REL ); -dev_info (PRIV_TO_DEV (priv),"Device open\n" ); - -ec_bhf_print_status (priv); -return 0 ; error_rx_free:
@@ -640,9 +562,6 @@ static int ec_bhf_probe(struct pci_dev *dev, const struct pci_device_id *id)memcpy_fromio (net_dev->dev_addr, priv->mii_io +MII_MAC_ADDR ,6 ); -dev_dbg (&dev->dev,"CX5020 Ethercat master address: %pM\n" , - net_dev->dev_addr); - err =register_netdev (net_dev);if (err <0 ) goto err_free_net_dev;
Signature · 1 line
1.7.10.4
From: Dariusz Marcinkiewicz <[email protected]>
Date: Sun, 24 Aug 2014 20:40:16 +0200
Quoted 4 lines
This cuts down the number of debug information spit out by the driver.
Signed-off-by Dariusz Marcinkiewicz <[email protected]>
Applied, thank you.