Skip to contentSkip to conversation

ARM: i.MX: Remove Phytec i.MX27 PCM038/PCM970 board files

PATCH New Alexander Shiyan 2 participants 2 messages Aug 23, 2014 – Aug 25, 2014

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Alexander Shiyan

author
#0 lore raw

PATCH 1/1 ARM: i.MX: Remove Phytec i.MX27 PCM038/PCM970 board files

pcm970-baseboard.c and mach-pcm038.c can be replaced with their devicetree equivalents: imx27-phytec-phycore-rdk.dts and imx27-phytec-phycore-som.dtsi respectively, so remove the board files.

Signed-off-by Alexander Shiyan <[email protected]>
---
 arch/arm/configs/imx_v4_v5_defconfig |   1 -
 arch/arm/mach-imx/Kconfig            |  30 ---
 arch/arm/mach-imx/Makefile           |   2 -
 arch/arm/mach-imx/board-pcm038.h     |  36 ----
 arch/arm/mach-imx/mach-pcm038.c      | 358 -----------------------------------
 arch/arm/mach-imx/pcm970-baseboard.c | 231 ----------------------
 6 files changed, 658 deletions(-)
 delete mode 100644 arch/arm/mach-imx/board-pcm038.h
 delete mode 100644 arch/arm/mach-imx/mach-pcm038.c
 delete mode 100644 arch/arm/mach-imx/pcm970-baseboard.c
arch/arm/configs/imx_v4_v5_defconfig +0 -1
index f53074c..9d73e69 100644
@@ -30,7 +30,6 @@ CONFIG_MACH_MX25_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX25SD=y
 CONFIG_MACH_IMX25_DT=y
 CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_PCM038=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
arch/arm/mach-imx/Kconfig +0 -30
index d48901a..64161aa 100644
@@ -231,36 +231,6 @@ config MACH_MX27ADS
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX27
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	bool "PHYTEC PCM970 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
arch/arm/mach-imx/Makefile +0 -2
index 614df32..9f1c359 100644
@@ -57,8 +57,6 @@ obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
 
 # i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
 obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
arch/arm/mach-imx/board-pcm038.h deleted +0 -36
deleted file mode 100644
index 6f371e3..0000000
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel at pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
-#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside pcm038_init().
- *
- * This example here is for the development board. Refer pcm970-baseboard.c
- */
-
-extern void pcm970_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
arch/arm/mach-imx/mach-pcm038.c deleted +0 -358

358 lines not on this page · raw message

arch/arm/mach-imx/pcm970-baseboard.c deleted +0 -231

231 lines not on this page · raw message

Signature · 1 line
1.8.5.5
Applied
#1 lore raw

PATCH 1/1 ARM: i.MX: Remove Phytec i.MX27 PCM038/PCM970 board files

Quoted 5 lines · Alexander Shiyan

pcm970-baseboard.c and mach-pcm038.c can be replaced with their devicetree equivalents: imx27-phytec-phycore-rdk.dts and imx27-phytec-phycore-som.dtsi respectively, so remove the board files.

Signed-off-by Alexander Shiyan <[email protected]>

Applied, thanks.