Skip to contentSkip to conversation

mm: BUG in unmap_page_range

PATCH New Sasha Levin 5 participants 42 messages Aug 2, 2014 – Sep 17, 2014

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

Hi all,

While fuzzing with trinity inside a KVM tools guest running the latest -next kernel, I've stumbled on the following spew:

[ 2957.087977] BUG: unable to handle kernel paging request at ffffea0003480008
[ 2957.088008] IP: unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088024] PGD 7fffc6067 PUD 7fffc5067 PMD 0
[ 2957.088041] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 2957.088087] Dumping ftrace buffer:
[ 2957.088266]    (ftrace buffer empty)
[ 2957.088279] Modules linked in:
[ 2957.088293] CPU: 2 PID: 15417 Comm: trinity-c200 Not tainted 3.16.0-rc7-next-20140801-sasha-00047-gd6ce559 #990
[ 2957.088301] task: ffff8807a8c50000 ti: ffff880739fb4000 task.ti: ffff880739fb4000
[ 2957.088320] RIP: unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088328] RSP: 0018:ffff880739fb7c58  EFLAGS: 00010246
[ 2957.088336] RAX: 0000000000000000 RBX: ffff880eb2bdbed8 RCX: dfff971b42800000
[ 2957.088343] RDX: 1ffff100e73f6fc4 RSI: 00007f00e85db000 RDI: ffffea0003480008
[ 2957.088350] RBP: ffff880739fb7d58 R08: 0000000000000001 R09: 0000000000b6e000
[ 2957.088357] R10: 0000000000000000 R11: 0000000000000001 R12: ffffea0003480000
[ 2957.088365] R13: 00000000d2000700 R14: 00007f00e85dc000 R15: 00007f00e85db000
[ 2957.088374] FS:  00007f00e85d8700(0000) GS:ffff88177fa00000(0000) knlGS:0000000000000000
[ 2957.088381] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2957.088387] CR2: ffffea0003480008 CR3: 00000007a802a000 CR4: 00000000000006a0
[ 2957.088406] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2957.088413] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 2957.088416] Stack:
[ 2957.088432]  ffff88171726d570 0000000000000010 0000000000000008 00000000d2000730
[ 2957.088450]  0000000019d00250 00007f00e85dc000 ffff880f9d311900 ffff880739fb7e20
[ 2957.088466]  ffff8807a8c507a0 ffff8807a8c50000 ffff8807a75fe000 ffff8807ceaa7a10
[ 2957.088469] Call Trace:
[ 2957.088490] unmap_single_vma (mm/memory.c:1348)
[ 2957.088505] unmap_vmas (mm/memory.c:1375 (discriminator 3))
[ 2957.088520] unmap_region (mm/mmap.c:2386 (discriminator 4))
[ 2957.088542] ? vma_rb_erase (mm/mmap.c:454 include/linux/rbtree_augmented.h:219 include/linux/rbtree_augmented.h:227 mm/mmap.c:493)
[ 2957.088559] ? vmacache_update (mm/vmacache.c:61)
[ 2957.088572] do_munmap (mm/mmap.c:2581)
[ 2957.088583] vm_munmap (mm/mmap.c:2596)
[ 2957.088595] SyS_munmap (mm/mmap.c:2601)
[ 2957.088616] tracesys (arch/x86/kernel/entry_64.S:541)
[ 2957.088770] Code: ff ff e8 f9 5f 07 00 48 8b 45 90 80 48 18 01 4d 85 e4 0f 84 8b fe ff ff 45 84 ed 0f 85 fc 03 00 00 49 8d 7c 24 08 e8 b5 67 07 00 <41> f6 44 24 08 01 0f 84 29 02 00 00 83 6d c8 01 4c 89 e7 e8 bd
All code
========
   0:	ff                   	(bad)
   1:	ff e8                	ljmpq  *<internal disassembler error>
   3:	f9                   	stc
   4:	5f                   	pop    %rdi
   5:	07                   	(bad)
   6:	00 48 8b             	add    %cl,-0x75(%rax)
   9:	45 90                	rex.RB xchg %eax,%r8d
   b:	80 48 18 01          	orb    $0x1,0x18(%rax)
   f:	4d 85 e4             	test   %r12,%r12
  12:	0f 84 8b fe ff ff    	je     0xfffffffffffffea3
  18:	45 84 ed             	test   %r13b,%r13b
  1b:	0f 85 fc 03 00 00    	jne    0x41d
  21:	49 8d 7c 24 08       	lea    0x8(%r12),%rdi
  26:	e8 b5 67 07 00       	callq  0x767e0
  2b:*	41 f6 44 24 08 01    	testb  $0x1,0x8(%r12)		<-- trapping instruction
  31:	0f 84 29 02 00 00    	je     0x260
  37:	83 6d c8 01          	subl   $0x1,-0x38(%rbp)
  3b:	4c 89 e7             	mov    %r12,%rdi
  3e:	e8                   	.byte 0xe8
  3f:	bd                   	.byte 0xbd
	...

Code starting with the faulting instruction
===========================================

   0:	41 f6 44 24 08 01    	testb  $0x1,0x8(%r12)
   6:	0f 84 29 02 00 00    	je     0x235
   c:	83 6d c8 01          	subl   $0x1,-0x38(%rbp)
  10:	4c 89 e7             	mov    %r12,%rdi
  13:	e8                   	.byte 0xe8
  14:	bd                   	.byte 0xbd
	...
[ 2957.088784] RIP unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088789]  RSP <ffff880739fb7c58>
[ 2957.088794] CR2: ffffea0003480008

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#1 lore raw
Quoted 55 lines · Sasha Levin

Hi all,

While fuzzing with trinity inside a KVM tools guest running the latest -next kernel, I've stumbled on the following spew:

[ 2957.087977] BUG: unable to handle kernel paging request at ffffea0003480008
[ 2957.088008] IP: unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088024] PGD 7fffc6067 PUD 7fffc5067 PMD 0
[ 2957.088041] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 2957.088087] Dumping ftrace buffer:
[ 2957.088266]    (ftrace buffer empty)
[ 2957.088279] Modules linked in:
[ 2957.088293] CPU: 2 PID: 15417 Comm: trinity-c200 Not tainted 3.16.0-rc7-next-20140801-sasha-00047-gd6ce559 #990
[ 2957.088301] task: ffff8807a8c50000 ti: ffff880739fb4000 task.ti: ffff880739fb4000
[ 2957.088320] RIP: unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088328] RSP: 0018:ffff880739fb7c58  EFLAGS: 00010246
[ 2957.088336] RAX: 0000000000000000 RBX: ffff880eb2bdbed8 RCX: dfff971b42800000
[ 2957.088343] RDX: 1ffff100e73f6fc4 RSI: 00007f00e85db000 RDI: ffffea0003480008
[ 2957.088350] RBP: ffff880739fb7d58 R08: 0000000000000001 R09: 0000000000b6e000
[ 2957.088357] R10: 0000000000000000 R11: 0000000000000001 R12: ffffea0003480000
[ 2957.088365] R13: 00000000d2000700 R14: 00007f00e85dc000 R15: 00007f00e85db000
[ 2957.088374] FS:  00007f00e85d8700(0000) GS:ffff88177fa00000(0000) knlGS:0000000000000000
[ 2957.088381] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2957.088387] CR2: ffffea0003480008 CR3: 00000007a802a000 CR4: 00000000000006a0
[ 2957.088406] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2957.088413] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 2957.088416] Stack:
[ 2957.088432]  ffff88171726d570 0000000000000010 0000000000000008 00000000d2000730
[ 2957.088450]  0000000019d00250 00007f00e85dc000 ffff880f9d311900 ffff880739fb7e20
[ 2957.088466]  ffff8807a8c507a0 ffff8807a8c50000 ffff8807a75fe000 ffff8807ceaa7a10
[ 2957.088469] Call Trace:
[ 2957.088490] unmap_single_vma (mm/memory.c:1348)
[ 2957.088505] unmap_vmas (mm/memory.c:1375 (discriminator 3))
[ 2957.088520] unmap_region (mm/mmap.c:2386 (discriminator 4))
[ 2957.088542] ? vma_rb_erase (mm/mmap.c:454 include/linux/rbtree_augmented.h:219 include/linux/rbtree_augmented.h:227 mm/mmap.c:493)
[ 2957.088559] ? vmacache_update (mm/vmacache.c:61)
[ 2957.088572] do_munmap (mm/mmap.c:2581)
[ 2957.088583] vm_munmap (mm/mmap.c:2596)
[ 2957.088595] SyS_munmap (mm/mmap.c:2601)
[ 2957.088616] tracesys (arch/x86/kernel/entry_64.S:541)
[ 2957.088770] Code: ff ff e8 f9 5f 07 00 48 8b 45 90 80 48 18 01 4d 85 e4 0f 84 8b fe ff ff 45 84 ed 0f 85 fc 03 00 00 49 8d 7c 24 08 e8 b5 67 07 00 <41> f6 44 24 08 01 0f 84 29 02 00 00 83 6d c8 01 4c 89 e7 e8 bd
All code
========
   0:	ff                   	(bad)
   1:	ff e8                	ljmpq  *<internal disassembler error>
   3:	f9                   	stc
   4:	5f                   	pop    %rdi
   5:	07                   	(bad)
   6:	00 48 8b             	add    %cl,-0x75(%rax)
   9:	45 90                	rex.RB xchg %eax,%r8d
   b:	80 48 18 01          	orb    $0x1,0x18(%rax)
   f:	4d 85 e4             	test   %r12,%r12
  12:	0f 84 8b fe ff ff    	je     0xfffffffffffffea3
  18:	45 84 ed             	test   %r13b,%r13b
  1b:	0f 85 fc 03 00 00    	jne    0x41d
Quoted 8 lines
  21:	49 8d 7c 24 08       	lea    0x8(%r12),%rdi
  26:	e8 b5 67 07 00       	callq  0x767e0
  2b:*	41 f6 44 24 08 01    	testb  $0x1,0x8(%r12)		<-- trapping instruction
  31:	0f 84 29 02 00 00    	je     0x260
  37:	83 6d c8 01          	subl   $0x1,-0x38(%rbp)
  3b:	4c 89 e7             	mov    %r12,%rdi
  3e:	e8                   	.byte 0xe8
  3f:	bd                   	.byte 0xbd

This differs in which functions got inlined (unmap_page_range showing up in place of zap_pte_range), but this is the same "if (PageAnon(page))" that Sasha reported in the "hang in shmem_fallocate" thread on June 26th.

I can see what it is now, and here is most of a patch (which I don't expect to satisfy Trinity yet); at this point I think I had better hand it over to Mel, to complete or to discard.

[INCOMPLETE PATCH] x86,mm: fix pte_special versus pte_numa

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access.

Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page.

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE).

It's unclear why c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: I suspect both were papering over PROT_NONE issues seen with inadequate pte_special(). Revert vm_normal_page() to how it was before, relying on pte_special().

I find it confusing, that the only example of ARCH_USES_NUMA_PROT_NONE no longer uses PROTNONE for NUMA, but SPECIAL instead: update the asm-generic comment a little, but that config option remains unhelpful.

But more seriously, I think this patch is incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, I think that will now make it pte_special()? So it ought to clear _PAGE_PROTNONE too. Or maybe we can never pte_mknuma() on a PROT_NONE area - there would be no point?

Around here I began to wonder if it was just a mistake to have deserted the PROTNONE for NUMA model: I know Linus had a strong reaction against it, and I've never delved into its drawbacks myself; but bringing yet another (SPECIAL) flag into the game is not an obvious improvement. Should we just revert c46a7c817e66, or would that be a mistake?

Let me hand this over to Mel now...

Partially-Fixes: c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels")

---

 arch/x86/include/asm/pgtable.h |    9 +++++++--
 include/asm-generic/pgtable.h  |    6 +++---
 mm/memory.c                    |    7 +++----
 3 files changed, 13 insertions(+), 9 deletions(-)
arch/x86/include/asm/pgtable.h +7 -2
@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
-				 (_PAGE_PRESENT|_PAGE_SPECIAL);
+	/*
+	 * See CONFIG_NUMA_BALANCING CONFIG_ARCH_USES_NUMA_PROT_NONE pte_numa()
+	 * in include/asm-generic/pgtable.h: on x86 we have _PAGE_BIT_NUMA ==
+	 * _PAGE_BIT_GLOBAL+1 == __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+	 */
+	return (pte_flags(pte) & _PAGE_SPECIAL) &&
+		(pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)
include/asm-generic/pgtable.h +3 -3
@@ -662,9 +662,9 @@ static inline int pmd_trans_unstable(pmd
 #ifdef CONFIG_NUMA_BALANCING
 #ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE
 /*
- * _PAGE_NUMA works identical to _PAGE_PROTNONE (it's actually the
- * same bit too). It's set only when _PAGE_PRESET is not set and it's
- * never set if _PAGE_PRESENT is set.
+ * _PAGE_NUMA works identically to _PAGE_PROTNONE.
+ * It is set only when neither _PAGE_PRESENT nor _PAGE_PROTNONE is set.
+ * This allows it to share a bit set only when present e.g. _PAGE_SPECIAL.
  *
  * pte/pmd_present() returns true if pte/pmd_numa returns true. Page
  * fault triggers on those regions if pte/pmd_numa returns true
mm/memory.c +3 -4
@@ -751,7 +751,7 @@ struct page *vm_normal_page(struct vm_ar
 	unsigned long pfn = pte_pfn(pte);
 
 	if (HAVE_PTE_SPECIAL) {
-		if (likely(!pte_special(pte) || pte_numa(pte)))
+		if (likely(!pte_special(pte)))
 			goto check_pfn;
 		if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
 			return NULL;
@@ -777,15 +777,14 @@ struct page *vm_normal_page(struct vm_ar
 		}
 	}
 
+	if (is_zero_pfn(pfn))
+		return NULL;
 check_pfn:
 	if (unlikely(pfn > highest_memmap_pfn)) {
 		print_bad_pte(vma, addr, pte, NULL);
 		return NULL;
 	}
 
-	if (is_zero_pfn(pfn))
-		return NULL;
-
 	/*
 	 * NOTE! We still have PageReserved() pages in the page tables.
 	 * eg. VDSO mappings can cause them to exist.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#2 lore raw
Quoted 85 lines · Hugh Dickins
Quoted 55 lines · Sasha Levin

Hi all,

While fuzzing with trinity inside a KVM tools guest running the latest -next kernel, I've stumbled on the following spew:

[ 2957.087977] BUG: unable to handle kernel paging request at ffffea0003480008
[ 2957.088008] IP: unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088024] PGD 7fffc6067 PUD 7fffc5067 PMD 0
[ 2957.088041] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 2957.088087] Dumping ftrace buffer:
[ 2957.088266]    (ftrace buffer empty)
[ 2957.088279] Modules linked in:
[ 2957.088293] CPU: 2 PID: 15417 Comm: trinity-c200 Not tainted 3.16.0-rc7-next-20140801-sasha-00047-gd6ce559 #990
[ 2957.088301] task: ffff8807a8c50000 ti: ffff880739fb4000 task.ti: ffff880739fb4000
[ 2957.088320] RIP: unmap_page_range (mm/memory.c:1132 mm/memory.c:1256 mm/memory.c:1277 mm/memory.c:1301)
[ 2957.088328] RSP: 0018:ffff880739fb7c58  EFLAGS: 00010246
[ 2957.088336] RAX: 0000000000000000 RBX: ffff880eb2bdbed8 RCX: dfff971b42800000
[ 2957.088343] RDX: 1ffff100e73f6fc4 RSI: 00007f00e85db000 RDI: ffffea0003480008
[ 2957.088350] RBP: ffff880739fb7d58 R08: 0000000000000001 R09: 0000000000b6e000
[ 2957.088357] R10: 0000000000000000 R11: 0000000000000001 R12: ffffea0003480000
[ 2957.088365] R13: 00000000d2000700 R14: 00007f00e85dc000 R15: 00007f00e85db000
[ 2957.088374] FS:  00007f00e85d8700(0000) GS:ffff88177fa00000(0000) knlGS:0000000000000000
[ 2957.088381] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2957.088387] CR2: ffffea0003480008 CR3: 00000007a802a000 CR4: 00000000000006a0
[ 2957.088406] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2957.088413] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 2957.088416] Stack:
[ 2957.088432]  ffff88171726d570 0000000000000010 0000000000000008 00000000d2000730
[ 2957.088450]  0000000019d00250 00007f00e85dc000 ffff880f9d311900 ffff880739fb7e20
[ 2957.088466]  ffff8807a8c507a0 ffff8807a8c50000 ffff8807a75fe000 ffff8807ceaa7a10
[ 2957.088469] Call Trace:
[ 2957.088490] unmap_single_vma (mm/memory.c:1348)
[ 2957.088505] unmap_vmas (mm/memory.c:1375 (discriminator 3))
[ 2957.088520] unmap_region (mm/mmap.c:2386 (discriminator 4))
[ 2957.088542] ? vma_rb_erase (mm/mmap.c:454 include/linux/rbtree_augmented.h:219 include/linux/rbtree_augmented.h:227 mm/mmap.c:493)
[ 2957.088559] ? vmacache_update (mm/vmacache.c:61)
[ 2957.088572] do_munmap (mm/mmap.c:2581)
[ 2957.088583] vm_munmap (mm/mmap.c:2596)
[ 2957.088595] SyS_munmap (mm/mmap.c:2601)
[ 2957.088616] tracesys (arch/x86/kernel/entry_64.S:541)
[ 2957.088770] Code: ff ff e8 f9 5f 07 00 48 8b 45 90 80 48 18 01 4d 85 e4 0f 84 8b fe ff ff 45 84 ed 0f 85 fc 03 00 00 49 8d 7c 24 08 e8 b5 67 07 00 <41> f6 44 24 08 01 0f 84 29 02 00 00 83 6d c8 01 4c 89 e7 e8 bd
All code
========
   0:	ff                   	(bad)
   1:	ff e8                	ljmpq  *<internal disassembler error>
   3:	f9                   	stc
   4:	5f                   	pop    %rdi
   5:	07                   	(bad)
   6:	00 48 8b             	add    %cl,-0x75(%rax)
   9:	45 90                	rex.RB xchg %eax,%r8d
   b:	80 48 18 01          	orb    $0x1,0x18(%rax)
   f:	4d 85 e4             	test   %r12,%r12
  12:	0f 84 8b fe ff ff    	je     0xfffffffffffffea3
  18:	45 84 ed             	test   %r13b,%r13b
  1b:	0f 85 fc 03 00 00    	jne    0x41d
Quoted 8 lines
  21:	49 8d 7c 24 08       	lea    0x8(%r12),%rdi
  26:	e8 b5 67 07 00       	callq  0x767e0
  2b:*	41 f6 44 24 08 01    	testb  $0x1,0x8(%r12)		<-- trapping instruction
  31:	0f 84 29 02 00 00    	je     0x260
  37:	83 6d c8 01          	subl   $0x1,-0x38(%rbp)
  3b:	4c 89 e7             	mov    %r12,%rdi
  3e:	e8                   	.byte 0xe8
  3f:	bd                   	.byte 0xbd

This differs in which functions got inlined (unmap_page_range showing up in place of zap_pte_range), but this is the same "if (PageAnon(page))" that Sasha reported in the "hang in shmem_fallocate" thread on June 26th.

I can see what it is now, and here is most of a patch (which I don't expect to satisfy Trinity yet); at this point I think I had better hand it over to Mel, to complete or to discard.

[INCOMPLETE PATCH] x86,mm: fix pte_special versus pte_numa

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access.

Quoted 5 lines

Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page.

:(

Quoted 8 lines

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE).

It's unclear why c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: I suspect both were papering over PROT_NONE issues seen with inadequate pte_special(). Revert vm_normal_page() to how it was before, relying on pte_special().

Rather than answering directly I updated your changelog

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE).

A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special().

Quoted 4 lines

I find it confusing, that the only example of ARCH_USES_NUMA_PROT_NONE no longer uses PROTNONE for NUMA, but SPECIAL instead: update the asm-generic comment a little, but that config option remains unhelpful.

ARCH_USES_NUMA_PROT_NONE should have been sent to the farm at the same time as that patch and by rights unified with the powerpc helpers. With the new _PAGE_NUMA bit, there is no reason they should have different implementations of pte_numa and related functions. Unfortunately unifying them is a little problematic due to differences in fundamental types. It could be done with #defines but I'm attaching a preliminary prototype to illustrate the issue.

Quoted 7 lines

But more seriously, I think this patch is incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, I think that will now make it pte_special()? So it ought to clear _PAGE_PROTNONE too. Or maybe we can never pte_mknuma() on a PROT_NONE area - there would be no point?

We are depending on the fact that inaccessible VMAs are skipped by the NUMA hinting scanner.

Quoted 6 lines

Around here I began to wonder if it was just a mistake to have deserted the PROTNONE for NUMA model: I know Linus had a strong reaction against it, and I've never delved into its drawbacks myself; but bringing yet another (SPECIAL) flag into the game is not an obvious improvement. Should we just revert c46a7c817e66, or would that be a mistake?

It's replacing one type of complexity with another. The downside is that _PAGE_NUMA == _PAGE_PROTNONE puts subtle traps all over the core for powerpc to fall foul of.

I'm attaching a preliminary pair of patches. The first which deals with ARCH_USES_NUMA_PROT_NONE and the second which is yours with a revised changelog. I'm adding Aneesh to the cc to look at the powerpc portion of the first patch.

Signature · 2 lines
Mel Gorman
SUSE Labs
Quoted 1 line

From d0c77a2b497da46c52792ead066d461e5111a594 Mon Sep 17 00:00:00 2001

From: Mel Gorman <[email protected]>
Date: Tue, 5 Aug 2014 12:06:50 +0100
Subject: [PATCH] mm: Remove misleading ARCH_USES_NUMA_PROT_NONE

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented _PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting fault scanner. This was found to be conceptually confusing with a lot of implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE bits and shrunk the maximum possible swap size but it did not go far enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary duplication in powerpc vs the generic implementation by defining the types the core NUMA helpers expected to exist from x86 with their ppc64 equivalent. The unification for ppc64 is less than ideal because types do not exist that the "generic" code expects to. This patch works around the problem but it would be preferred if the powerpc people would look at this to see if they have opinions on what might suit them better.

---
 arch/powerpc/include/asm/pgtable.h | 55 ++++++++------------------------------
 arch/x86/Kconfig                   |  1 -
 include/asm-generic/pgtable.h      | 35 ++++++++++++------------
 init/Kconfig                       | 11 --------
 4 files changed, 29 insertions(+), 73 deletions(-)
arch/powerpc/include/asm/pgtable.h +11 -44
index d98c1ec..47d3f8f 100644
@@ -38,7 +38,6 @@ static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK)
 static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
 
 #ifdef CONFIG_NUMA_BALANCING
-
 static inline int pte_present(pte_t pte)
 {
 	return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA);
@@ -50,37 +49,6 @@ static inline int pte_present_nonuma(pte_t pte)
 	return pte_val(pte) & (_PAGE_PRESENT);
 }
 
-#define pte_numa pte_numa
-static inline int pte_numa(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_NUMA|_PAGE_PRESENT)) == _PAGE_NUMA;
-}
-
-#define pte_mknonnuma pte_mknonnuma
-static inline pte_t pte_mknonnuma(pte_t pte)
-{
-	pte_val(pte) &= ~_PAGE_NUMA;
-	pte_val(pte) |=  _PAGE_PRESENT | _PAGE_ACCESSED;
-	return pte;
-}
-
-#define pte_mknuma pte_mknuma
-static inline pte_t pte_mknuma(pte_t pte)
-{
-	/*
-	 * We should not set _PAGE_NUMA on non present ptes. Also clear the
-	 * present bit so that hash_page will return 1 and we collect this
-	 * as numa fault.
-	 */
-	if (pte_present(pte)) {
-		pte_val(pte) |= _PAGE_NUMA;
-		pte_val(pte) &= ~_PAGE_PRESENT;
-	} else
-		VM_BUG_ON(1);
-	return pte;
-}
-
 #define ptep_set_numa ptep_set_numa
 static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pte_t *ptep)
@@ -92,12 +60,6 @@ static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_numa pmd_numa
-static inline int pmd_numa(pmd_t pmd)
-{
-	return pte_numa(pmd_pte(pmd));
-}
-
 #define pmdp_set_numa pmdp_set_numa
 static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pmd_t *pmdp)
@@ -109,16 +71,21 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t is
+ * equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
+static inline pteval_t pte_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & PAGE_PROT_BITS;
 }
 
-#define pmd_mknuma pmd_mknuma
-static inline pmd_t pmd_mknuma(pmd_t pmd)
+static inline pteval_t pmd_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknuma(pmd_pte(pmd)));
+	return pmd_val(pte) & PAGE_PROT_BITS;
 }
 
 # else
arch/x86/Kconfig +0 -1
index d24887b..0a3f32b 100644
@@ -28,7 +28,6 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
 	select ARCH_SUPPORTS_INT128 if X86_64
-	select ARCH_WANTS_PROT_NUMA_PROT_NONE
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_PCSPKR_PLATFORM
include/asm-generic/pgtable.h +18 -17
index 53b2acc..53294fb 100644
@@ -660,12 +660,21 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 }
 
 #ifdef CONFIG_NUMA_BALANCING
-#ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE
+
+/*
+ * _PAGE_NUMA distinguishes between an unmapped page table entry, an entry that
+ * is protected for PROT_NONE and a NUMA hinting fault entry. If the
+ * architecture defines __PAGE_PROTNONE then take it into account. As this is
+ * not universally the case we are relying on the NUMA hinting scanner to skip
+ * inaccessible VMAs.
+ */
+#ifdef _PAGE_PROTNONE
+#define _PAGE_NUMA_PROTNONE _PAGE_PROTNONE
+#else
+#define _PAGE_NUMA_PROTNONE 0
+#endif
+
 /*
- * _PAGE_NUMA works identical to _PAGE_PROTNONE (it's actually the
- * same bit too). It's set only when _PAGE_PRESET is not set and it's
- * never set if _PAGE_PRESENT is set.
- *
  * pte/pmd_present() returns true if pte/pmd_numa returns true. Page
  * fault triggers on those regions if pte/pmd_numa returns true
  * (because _PAGE_PRESENT is not set).
@@ -674,7 +683,7 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 static inline int pte_numa(pte_t pte)
 {
 	return (pte_flags(pte) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+		(_PAGE_NUMA|_PAGE_NUMA_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
 }
 #endif
 
@@ -682,7 +691,7 @@ static inline int pte_numa(pte_t pte)
 static inline int pmd_numa(pmd_t pmd)
 {
 	return (pmd_flags(pmd) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+		(_PAGE_NUMA|_PAGE_NUMA_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
 }
 #endif
 
@@ -722,6 +731,8 @@ static inline pte_t pte_mknuma(pte_t pte)
 {
 	pteval_t val = pte_val(pte);
 
+	VM_BUG_ON(!pte_present(pte));
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;
 
@@ -765,16 +776,6 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 }
 #endif
 #else
-extern int pte_numa(pte_t pte);
-extern int pmd_numa(pmd_t pmd);
-extern pte_t pte_mknonnuma(pte_t pte);
-extern pmd_t pmd_mknonnuma(pmd_t pmd);
-extern pte_t pte_mknuma(pte_t pte);
-extern pmd_t pmd_mknuma(pmd_t pmd);
-extern void ptep_set_numa(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-extern void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp);
-#endif /* CONFIG_ARCH_USES_NUMA_PROT_NONE */
-#else
 static inline int pmd_numa(pmd_t pmd)
 {
 	return 0;
init/Kconfig +0 -11
index 9d76b99..60fa415 100644
@@ -844,17 +844,6 @@ config ARCH_SUPPORTS_INT128
 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
 	bool
 
-#
-# For architectures that are willing to define _PAGE_NUMA as _PAGE_PROTNONE
-config ARCH_WANTS_PROT_NUMA_PROT_NONE
-	bool
-
-config ARCH_USES_NUMA_PROT_NONE
-	bool
-	default y
-	depends on ARCH_WANTS_PROT_NUMA_PROT_NONE
-	depends on NUMA_BALANCING
-
 config NUMA_BALANCING_DEFAULT_ENABLED
 	bool "Automatically enable NUMA aware memory/task placement"
 	default y
Quoted 1 line

From aacf36ad7b4bbe6d9f0afac83e8ca9b0666cb9f0 Mon Sep 17 00:00:00 2001

From: Hugh Dickins <[email protected]>
Date: Tue, 5 Aug 2014 11:33:59 +0100
Subject: [PATCH] x86,mm: fix pte_special versus pte_numa

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access.

Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page.

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special().

It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it it pte_special(). This is side-stepped by the fact that NUMA hinting faults skiped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting.

Partially-Fixes: c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels")

---
 arch/x86/include/asm/pgtable.h | 9 +++++++--
 mm/memory.c                    | 7 +++----
 2 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable.h +7 -2
index 0ec0560..230b811 100644
@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
-				 (_PAGE_PRESENT|_PAGE_SPECIAL);
+	/*
+	 * See CONFIG_NUMA_BALANCING CONFIG_ARCH_USES_NUMA_PROT_NONE pte_numa()
+	 * in include/asm-generic/pgtable.h: on x86 we have _PAGE_BIT_NUMA ==
+	 * _PAGE_BIT_GLOBAL+1 == __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+	 */
+	return (pte_flags(pte) & _PAGE_SPECIAL) &&
+		(pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)
mm/memory.c +3 -4
index 8b44f76..0a21f3d 100644
@@ -751,7 +751,7 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 	unsigned long pfn = pte_pfn(pte);
 
 	if (HAVE_PTE_SPECIAL) {
-		if (likely(!pte_special(pte) || pte_numa(pte)))
+		if (likely(!pte_special(pte)))
 			goto check_pfn;
 		if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
 			return NULL;
@@ -777,15 +777,14 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		}
 	}
 
+	if (is_zero_pfn(pfn))
+		return NULL;
 check_pfn:
 	if (unlikely(pfn > highest_memmap_pfn)) {
 		print_bad_pte(vma, addr, pte, NULL);
 		return NULL;
 	}
 
-	if (is_zero_pfn(pfn))
-		return NULL;
-
 	/*
 	 * NOTE! We still have PageReserved() pages in the page tables.
 	 * eg. VDSO mappings can cause them to exist.
Acked-by
#3 lore raw
Quoted 32 lines · Mel Gorman
Quoted 12 lines · Hugh Dickins

[INCOMPLETE PATCH] x86,mm: fix pte_special versus pte_numa

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access.

Quoted 5 lines

Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page.

:(

Quoted 8 lines

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE).

It's unclear why c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: I suspect both were papering over PROT_NONE issues seen with inadequate pte_special(). Revert vm_normal_page() to how it was before, relying on pte_special().

Rather than answering directly I updated your changelog

Quoted 8 lines

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE).

A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special().

Thanks, that's fine.

Quoted 21 lines
Quoted 5 lines

I find it confusing, that the only example of ARCH_USES_NUMA_PROT_NONE no longer uses PROTNONE for NUMA, but SPECIAL instead: update the asm-generic comment a little, but that config option remains unhelpful.

ARCH_USES_NUMA_PROT_NONE should have been sent to the farm at the same time as that patch and by rights unified with the powerpc helpers. With the new _PAGE_NUMA bit, there is no reason they should have different implementations of pte_numa and related functions. Unfortunately unifying them is a little problematic due to differences in fundamental types. It could be done with #defines but I'm attaching a preliminary prototype to illustrate the issue.

Quoted 7 lines

But more seriously, I think this patch is incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, I think that will now make it pte_special()? So it ought to clear _PAGE_PROTNONE too. Or maybe we can never pte_mknuma() on a PROT_NONE area - there would be no point?

Quoted 2 lines

We are depending on the fact that inaccessible VMAs are skipped by the NUMA hinting scanner.

Ah, okay. And the other way round (mprotecting to PROT_NONE an area which already contains _PAGE_NUMA ptes) already looked safe to me.

Quoted 11 lines
Quoted 7 lines

Around here I began to wonder if it was just a mistake to have deserted the PROTNONE for NUMA model: I know Linus had a strong reaction against it, and I've never delved into its drawbacks myself; but bringing yet another (SPECIAL) flag into the game is not an obvious improvement. Should we just revert c46a7c817e66, or would that be a mistake?

It's replacing one type of complexity with another. The downside is that _PAGE_NUMA == _PAGE_PROTNONE puts subtle traps all over the core for powerpc to fall foul of.

Okay.

Quoted 5 lines

I'm attaching a preliminary pair of patches. The first which deals with ARCH_USES_NUMA_PROT_NONE and the second which is yours with a revised changelog. I'm adding Aneesh to the cc to look at the powerpc portion of the first patch.

Thanks a lot, Mel.

I am surprised by the ordering, but perhaps you meant nothing by it. Isn't the first one a welcome but optional cleanup, and the second one a fix that we need in 3.16-stable? Or does the fix actually depend in some unstated way upon the cleanup, in powerpc-land perhaps?

Aside from that, for the first patch: yes, I heartily approve of the disappearance of CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE and CONFIG_ARCH_USES_NUMA_PROT_NONE. If you wish, add

but of course it's really Aneesh and powerpc who are the test of it.

One thing I did wonder, though: at first I was reassured by the VM_BUG_ON(!pte_present(pte)) you add to pte_mknuma(); but then thought it would be better as VM_BUG_ON(!(val & _PAGE_PRESENT)), being stronger
- asserting that indeed we do not put NUMA hints on PROT_NONE areas. (But I have not tested, perhaps such a VM_BUG_ON would actually fire.)

And in the second patch, a few trivial edits:

Quoted 4 lines

It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it it pte_special(). This is side-stepped by the fact

s/it it/it/

Quoted 1 line

that NUMA hinting faults skiped PROT_NONE VMAs and there are no grounds

s/skiped/skip/

Quoted 3 lines

where a NUMA hinting fault on a PROT_NONE VMA would be interesting.

Partially-Fixes: c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels")

s/Partially-//

Quoted 2 lines

s/Not-yet-//

Quoted 1 line
Not-yet-Signed-off-by Mel Gorman <[email protected]>

Ditto I must leave to you!

Quoted 11 lines
---
 arch/x86/include/asm/pgtable.h | 9 +++++++--
 mm/memory.c                    | 7 +++----
 2 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable.h +0 -0
index 0ec0560..230b811 100644

arch/x86/include/asm/pgtable.h static inline int pte_exec(pte_t pte) · line 135

Quoted 7 lines
arch/x86/include/asm/pgtable.h +2 -2
@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
-				 (_PAGE_PRESENT|_PAGE_SPECIAL);
+	/*
+	 * See CONFIG_NUMA_BALANCING CONFIG_ARCH_USES_NUMA_PROT_NONE pte_numa()

s/CONFIG_ARCH_USES_NUMA_PROT_NONE //
even if you do end up reordering this patch before the other.

Thanks!
Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#4 lore raw

Thanks Hugh, Mel. I've added both patches to my local tree and will update tomorrow with the weather.

Also:

Quoted 5 lines · Hugh Dickins

One thing I did wonder, though: at first I was reassured by the VM_BUG_ON(!pte_present(pte)) you add to pte_mknuma(); but then thought it would be better as VM_BUG_ON(!(val & _PAGE_PRESENT)), being stronger
- asserting that indeed we do not put NUMA hints on PROT_NONE areas. (But I have not tested, perhaps such a VM_BUG_ON would actually fire.)

I've added VM_BUG_ON(!(val & _PAGE_PRESENT)) in just as a curiosity, I'll update how that one looks as well.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#5 lore raw
Quoted 6 lines · Sasha Levin

Thanks Hugh, Mel. I've added both patches to my local tree and will update tomorrow with the weather.

Also:

On 08/05/2014 08:42 PM, Hugh Dickins wrote:

Quoted 8 lines
Quoted 5 lines

One thing I did wonder, though: at first I was reassured by the VM_BUG_ON(!pte_present(pte)) you add to pte_mknuma(); but then thought it would be better as VM_BUG_ON(!(val & _PAGE_PRESENT)), being stronger
- asserting that indeed we do not put NUMA hints on PROT_NONE areas. (But I have not tested, perhaps such a VM_BUG_ON would actually fire.)

I've added VM_BUG_ON(!(val & _PAGE_PRESENT)) in just as a curiosity, I'll update how that one looks as well.

Sorry for the rather long delay.

The patch looks fine, the issue didn't reproduce.

The added VM_BUG_ON didn't trigger either, so maybe we should consider adding it in.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#6 lore raw

PATCH 1/1 x86,mm: fix pte_special versus pte_numa

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access.

Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page.

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special().

It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting.

Fixes c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels")
Reported-and-tested-by Sasha Levin <[email protected]>
---
 arch/x86/include/asm/pgtable.h | 9 +++++++--
 mm/memory.c                    | 7 +++----
 2 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable.h +7 -2
index 0ec0560..aa97a07 100644
@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
-				 (_PAGE_PRESENT|_PAGE_SPECIAL);
+	/*
+	 * See CONFIG_NUMA_BALANCING pte_numa in include/asm-generic/pgtable.h.
+	 * On x86 we have _PAGE_BIT_NUMA == _PAGE_BIT_GLOBAL+1 ==
+	 * __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+	 */
+	return (pte_flags(pte) & _PAGE_SPECIAL) &&
+		(pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)
mm/memory.c +3 -4
index 8b44f76..0a21f3d 100644
@@ -751,7 +751,7 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 	unsigned long pfn = pte_pfn(pte);
 
 	if (HAVE_PTE_SPECIAL) {
-		if (likely(!pte_special(pte) || pte_numa(pte)))
+		if (likely(!pte_special(pte)))
 			goto check_pfn;
 		if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
 			return NULL;
@@ -777,15 +777,14 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		}
 	}
 
+	if (is_zero_pfn(pfn))
+		return NULL;
 check_pfn:
 	if (unlikely(pfn > highest_memmap_pfn)) {
 		print_bad_pte(vma, addr, pte, NULL);
 		return NULL;
 	}
 
-	if (is_zero_pfn(pfn))
-		return NULL;
-
 	/*
 	 * NOTE! We still have PageReserved() pages in the page tables.
 	 * eg. VDSO mappings can cause them to exist.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#7 lore raw

PATCH 1/1 mm: Remove misleading ARCH_USES_NUMA_PROT_NONE

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented _PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting fault scanner. This was found to be conceptually confusing with a lot of implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE bits and shrunk the maximum possible swap size but it did not go far enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary duplication in powerpc vs the generic implementation by defining the types the core NUMA helpers expected to exist from x86 with their ppc64 equivalent. This necessitated that a PTE bit mask be created that identified the bits that distinguish present from NUMA pte entries but it is expected this will only differ between arches based on _PAGE_PROTNONE. The naming for the generic helpers was taken from x86 originally but ppc64 has types that are equivalent for the purposes of the helper so they are mapped instead of duplicating code.

---
 arch/powerpc/include/asm/pgtable.h    | 57 ++++++++---------------------------
 arch/powerpc/include/asm/pte-common.h |  5 +++
 arch/x86/Kconfig                      |  1 -
 arch/x86/include/asm/pgtable_types.h  | 14 +++++++++
 include/asm-generic/pgtable.h         | 27 ++++++-----------
 init/Kconfig                          | 11 -------
 6 files changed, 40 insertions(+), 75 deletions(-)
arch/powerpc/include/asm/pgtable.h +12 -45
index d98c1ec..f60d4ea 100644
@@ -38,10 +38,9 @@ static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK)
 static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
 
 #ifdef CONFIG_NUMA_BALANCING
-
 static inline int pte_present(pte_t pte)
 {
-	return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA);
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
 #define pte_present_nonuma pte_present_nonuma
@@ -50,37 +49,6 @@ static inline int pte_present_nonuma(pte_t pte)
 	return pte_val(pte) & (_PAGE_PRESENT);
 }
 
-#define pte_numa pte_numa
-static inline int pte_numa(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_NUMA|_PAGE_PRESENT)) == _PAGE_NUMA;
-}
-
-#define pte_mknonnuma pte_mknonnuma
-static inline pte_t pte_mknonnuma(pte_t pte)
-{
-	pte_val(pte) &= ~_PAGE_NUMA;
-	pte_val(pte) |=  _PAGE_PRESENT | _PAGE_ACCESSED;
-	return pte;
-}
-
-#define pte_mknuma pte_mknuma
-static inline pte_t pte_mknuma(pte_t pte)
-{
-	/*
-	 * We should not set _PAGE_NUMA on non present ptes. Also clear the
-	 * present bit so that hash_page will return 1 and we collect this
-	 * as numa fault.
-	 */
-	if (pte_present(pte)) {
-		pte_val(pte) |= _PAGE_NUMA;
-		pte_val(pte) &= ~_PAGE_PRESENT;
-	} else
-		VM_BUG_ON(1);
-	return pte;
-}
-
 #define ptep_set_numa ptep_set_numa
 static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pte_t *ptep)
@@ -92,12 +60,6 @@ static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_numa pmd_numa
-static inline int pmd_numa(pmd_t pmd)
-{
-	return pte_numa(pmd_pte(pmd));
-}
-
 #define pmdp_set_numa pmdp_set_numa
 static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pmd_t *pmdp)
@@ -109,16 +71,21 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t and
+ * pmd_t are equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
+static inline pteval_t ptenuma_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
-#define pmd_mknuma pmd_mknuma
-static inline pmd_t pmd_mknuma(pmd_t pmd)
+static inline pmdval_t pmdnuma_flags(pmd_t pmd)
 {
-	return pte_pmd(pte_mknuma(pmd_pte(pmd)));
+	return pmd_val(pmd) & _PAGE_NUMA_MASK;
 }
 
 # else
arch/powerpc/include/asm/pte-common.h +5 -0
index 8d1569c..e040c35 100644
@@ -98,6 +98,11 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 			 _PAGE_USER | _PAGE_ACCESSED | \
 			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
+#ifdef CONFIG_NUMA_BALANCING
+/* Mask of bits that distinguish present and numa ptes */
+#define _PAGE_NUMA_MASK (_PAGE_NUMA|_PAGE_PRESENT)
+#endif
+
 /*
  * We define 2 sets of base prot bits, one for basic pages (ie,
  * cacheable kernel and user pages) and one for non cacheable
arch/x86/Kconfig +0 -1
index d24887b..0a3f32b 100644
@@ -28,7 +28,6 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
 	select ARCH_SUPPORTS_INT128 if X86_64
-	select ARCH_WANTS_PROT_NUMA_PROT_NONE
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_PCSPKR_PLATFORM
arch/x86/include/asm/pgtable_types.h +14 -0
index f216963..0f9724c 100644
@@ -325,6 +325,20 @@ static inline pteval_t pte_flags(pte_t pte)
 	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
 
+#ifdef CONFIG_NUMA_BALANCING
+/* Set of bits that distinguishes present, prot_none and numa ptes */
+#define _PAGE_NUMA_MASK (_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)
+static inline pteval_t ptenuma_flags(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_NUMA_MASK;
+}
+
+static inline pmdval_t pmdnuma_flags(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_NUMA_MASK;
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
 #define pgprot_val(x)	((x).pgprot)
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
include/asm-generic/pgtable.h +9 -18
index 53b2acc..281870f 100644
@@ -660,11 +660,12 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 }
 
 #ifdef CONFIG_NUMA_BALANCING
-#ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE
 /*
- * _PAGE_NUMA works identical to _PAGE_PROTNONE (it's actually the
- * same bit too). It's set only when _PAGE_PRESET is not set and it's
- * never set if _PAGE_PRESENT is set.
+ * _PAGE_NUMA distinguishes between an unmapped page table entry, an entry that
+ * is protected for PROT_NONE and a NUMA hinting fault entry. If the
+ * architecture defines __PAGE_PROTNONE then it should take that into account
+ * but those that do not can rely on the fact that the NUMA hinting scanner
+ * skips inaccessible VMAs.
  *
  * pte/pmd_present() returns true if pte/pmd_numa returns true. Page
  * fault triggers on those regions if pte/pmd_numa returns true
@@ -673,16 +674,14 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 #ifndef pte_numa
 static inline int pte_numa(pte_t pte)
 {
-	return (pte_flags(pte) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return ptenuma_flags(pte) == _PAGE_NUMA;
 }
 #endif
 
 #ifndef pmd_numa
 static inline int pmd_numa(pmd_t pmd)
 {
-	return (pmd_flags(pmd) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return pmdnuma_flags(pmd) == _PAGE_NUMA;
 }
 #endif
 
@@ -722,6 +721,8 @@ static inline pte_t pte_mknuma(pte_t pte)
 {
 	pteval_t val = pte_val(pte);
 
+	VM_BUG_ON(!(val & _PAGE_PRESENT));
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;
 
@@ -765,16 +766,6 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 }
 #endif
 #else
-extern int pte_numa(pte_t pte);
-extern int pmd_numa(pmd_t pmd);
-extern pte_t pte_mknonnuma(pte_t pte);
-extern pmd_t pmd_mknonnuma(pmd_t pmd);
-extern pte_t pte_mknuma(pte_t pte);
-extern pmd_t pmd_mknuma(pmd_t pmd);
-extern void ptep_set_numa(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-extern void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp);
-#endif /* CONFIG_ARCH_USES_NUMA_PROT_NONE */
-#else
 static inline int pmd_numa(pmd_t pmd)
 {
 	return 0;
init/Kconfig +0 -11
index 9d76b99..60fa415 100644
@@ -844,17 +844,6 @@ config ARCH_SUPPORTS_INT128
 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
 	bool
 
-#
-# For architectures that are willing to define _PAGE_NUMA as _PAGE_PROTNONE
-config ARCH_WANTS_PROT_NUMA_PROT_NONE
-	bool
-
-config ARCH_USES_NUMA_PROT_NONE
-	bool
-	default y
-	depends on ARCH_WANTS_PROT_NUMA_PROT_NONE
-	depends on NUMA_BALANCING
-
 config NUMA_BALANCING_DEFAULT_ENABLED
 	bool "Automatically enable NUMA aware memory/task placement"
 	default y

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

Reviewed-by on v1 1/1
#8 lore raw

Re: [PATCH] mm: Remove misleading ARCH_USES_NUMA_PROT_NONE

Quoted 22 lines · Mel Gorman

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented _PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting fault scanner. This was found to be conceptually confusing with a lot of implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE bits and shrunk the maximum possible swap size but it did not go far enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary duplication in powerpc vs the generic implementation by defining the types the core NUMA helpers expected to exist from x86 with their ppc64 equivalent. This necessitated that a PTE bit mask be created that identified the bits that distinguish present from NUMA pte entries but it is expected this will only differ between arches based on _PAGE_PROTNONE. The naming for the generic helpers was taken from x86 originally but ppc64 has types that are equivalent for the purposes of the helper so they are mapped instead of duplicating code.

Quoted 1 line
Quoted 247 lines
---
 arch/powerpc/include/asm/pgtable.h    | 57 ++++++++---------------------------
 arch/powerpc/include/asm/pte-common.h |  5 +++
 arch/x86/Kconfig                      |  1 -
 arch/x86/include/asm/pgtable_types.h  | 14 +++++++++
 include/asm-generic/pgtable.h         | 27 ++++++-----------
 init/Kconfig                          | 11 -------
 6 files changed, 40 insertions(+), 75 deletions(-)
arch/powerpc/include/asm/pgtable.h +12 -45
index d98c1ec..f60d4ea 100644
@@ -38,10 +38,9 @@ static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK)
 static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
 
 #ifdef CONFIG_NUMA_BALANCING
-
 static inline int pte_present(pte_t pte)
 {
-	return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA);
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
 #define pte_present_nonuma pte_present_nonuma
@@ -50,37 +49,6 @@ static inline int pte_present_nonuma(pte_t pte)
 	return pte_val(pte) & (_PAGE_PRESENT);
 }
 
-#define pte_numa pte_numa
-static inline int pte_numa(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_NUMA|_PAGE_PRESENT)) == _PAGE_NUMA;
-}
-
-#define pte_mknonnuma pte_mknonnuma
-static inline pte_t pte_mknonnuma(pte_t pte)
-{
-	pte_val(pte) &= ~_PAGE_NUMA;
-	pte_val(pte) |=  _PAGE_PRESENT | _PAGE_ACCESSED;
-	return pte;
-}
-
-#define pte_mknuma pte_mknuma
-static inline pte_t pte_mknuma(pte_t pte)
-{
-	/*
-	 * We should not set _PAGE_NUMA on non present ptes. Also clear the
-	 * present bit so that hash_page will return 1 and we collect this
-	 * as numa fault.
-	 */
-	if (pte_present(pte)) {
-		pte_val(pte) |= _PAGE_NUMA;
-		pte_val(pte) &= ~_PAGE_PRESENT;
-	} else
-		VM_BUG_ON(1);
-	return pte;
-}
-
 #define ptep_set_numa ptep_set_numa
 static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pte_t *ptep)
@@ -92,12 +60,6 @@ static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_numa pmd_numa
-static inline int pmd_numa(pmd_t pmd)
-{
-	return pte_numa(pmd_pte(pmd));
-}
-
 #define pmdp_set_numa pmdp_set_numa
 static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pmd_t *pmdp)
@@ -109,16 +71,21 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t and
+ * pmd_t are equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
+static inline pteval_t ptenuma_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
-#define pmd_mknuma pmd_mknuma
-static inline pmd_t pmd_mknuma(pmd_t pmd)
+static inline pmdval_t pmdnuma_flags(pmd_t pmd)
 {
-	return pte_pmd(pte_mknuma(pmd_pte(pmd)));
+	return pmd_val(pmd) & _PAGE_NUMA_MASK;
 }
 
 # else
arch/powerpc/include/asm/pte-common.h +5 -0
index 8d1569c..e040c35 100644
@@ -98,6 +98,11 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 			 _PAGE_USER | _PAGE_ACCESSED | \
 			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
+#ifdef CONFIG_NUMA_BALANCING
+/* Mask of bits that distinguish present and numa ptes */
+#define _PAGE_NUMA_MASK (_PAGE_NUMA|_PAGE_PRESENT)
+#endif
+
 /*
  * We define 2 sets of base prot bits, one for basic pages (ie,
  * cacheable kernel and user pages) and one for non cacheable
arch/x86/Kconfig +0 -1
index d24887b..0a3f32b 100644
@@ -28,7 +28,6 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
 	select ARCH_SUPPORTS_INT128 if X86_64
-	select ARCH_WANTS_PROT_NUMA_PROT_NONE
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_PCSPKR_PLATFORM
arch/x86/include/asm/pgtable_types.h +14 -0
index f216963..0f9724c 100644
@@ -325,6 +325,20 @@ static inline pteval_t pte_flags(pte_t pte)
 	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
 
+#ifdef CONFIG_NUMA_BALANCING
+/* Set of bits that distinguishes present, prot_none and numa ptes */
+#define _PAGE_NUMA_MASK (_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)
+static inline pteval_t ptenuma_flags(pte_t pte)
+{
+	return pte_flags(pte) & _PAGE_NUMA_MASK;
+}
+
+static inline pmdval_t pmdnuma_flags(pmd_t pmd)
+{
+	return pmd_flags(pmd) & _PAGE_NUMA_MASK;
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
 #define pgprot_val(x)	((x).pgprot)
 #define __pgprot(x)	((pgprot_t) { (x) } )
 
include/asm-generic/pgtable.h +9 -18
index 53b2acc..281870f 100644
@@ -660,11 +660,12 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 }
 
 #ifdef CONFIG_NUMA_BALANCING
-#ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE
 /*
- * _PAGE_NUMA works identical to _PAGE_PROTNONE (it's actually the
- * same bit too). It's set only when _PAGE_PRESET is not set and it's
- * never set if _PAGE_PRESENT is set.
+ * _PAGE_NUMA distinguishes between an unmapped page table entry, an entry that
+ * is protected for PROT_NONE and a NUMA hinting fault entry. If the
+ * architecture defines __PAGE_PROTNONE then it should take that into account
+ * but those that do not can rely on the fact that the NUMA hinting scanner
+ * skips inaccessible VMAs.
  *
  * pte/pmd_present() returns true if pte/pmd_numa returns true. Page
  * fault triggers on those regions if pte/pmd_numa returns true
@@ -673,16 +674,14 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 #ifndef pte_numa
 static inline int pte_numa(pte_t pte)
 {
-	return (pte_flags(pte) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return ptenuma_flags(pte) == _PAGE_NUMA;
 }
 #endif
 
 #ifndef pmd_numa
 static inline int pmd_numa(pmd_t pmd)
 {
-	return (pmd_flags(pmd) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return pmdnuma_flags(pmd) == _PAGE_NUMA;
 }
 #endif
 
@@ -722,6 +721,8 @@ static inline pte_t pte_mknuma(pte_t pte)
 {
 	pteval_t val = pte_val(pte);
 
+	VM_BUG_ON(!(val & _PAGE_PRESENT));
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;
 
@@ -765,16 +766,6 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 }
 #endif
 #else
-extern int pte_numa(pte_t pte);
-extern int pmd_numa(pmd_t pmd);
-extern pte_t pte_mknonnuma(pte_t pte);
-extern pmd_t pmd_mknonnuma(pmd_t pmd);
-extern pte_t pte_mknuma(pte_t pte);
-extern pmd_t pmd_mknuma(pmd_t pmd);
-extern void ptep_set_numa(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-extern void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp);
-#endif /* CONFIG_ARCH_USES_NUMA_PROT_NONE */
-#else
 static inline int pmd_numa(pmd_t pmd)
 {
 	return 0;
init/Kconfig +0 -12
index 9d76b99..60fa415 100644
@@ -844,17 +844,6 @@ config ARCH_SUPPORTS_INT128
 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
 	bool
 
-#
-# For architectures that are willing to define _PAGE_NUMA as _PAGE_PROTNONE
-config ARCH_WANTS_PROT_NUMA_PROT_NONE
-	bool
-
-config ARCH_USES_NUMA_PROT_NONE
-	bool
-	default y
-	depends on ARCH_WANTS_PROT_NUMA_PROT_NONE
-	depends on NUMA_BALANCING
-
 config NUMA_BALANCING_DEFAULT_ENABLED
 	bool "Automatically enable NUMA aware memory/task placement"
 	default y
 
--
Quoted 4 lines

To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#9 lore raw
In reply to Sasha Levin
Quoted 13 lines · Sasha Levin
Quoted 12 lines · Sasha Levin
Quoted 12 lines

Thanks Hugh, Mel. I've added both patches to my local tree and will update tomorrow with the weather.

Also:

Quoted 5 lines · Hugh Dickins
Quoted 5 lines

One thing I did wonder, though: at first I was reassured by the VM_BUG_ON(!pte_present(pte)) you add to pte_mknuma(); but then thought it would be better as VM_BUG_ON(!(val & _PAGE_PRESENT)), being stronger
- asserting that indeed we do not put NUMA hints on PROT_NONE areas. (But I have not tested, perhaps such a VM_BUG_ON would actually fire.)

Quoted 8 lines
Quoted 2 lines
Quoted 2 lines

I've added VM_BUG_ON(!(val & _PAGE_PRESENT)) in just as a curiosity, I'll update how that one looks as well.

Sorry for the rather long delay.

The patch looks fine, the issue didn't reproduce.

The added VM_BUG_ON didn't trigger either, so maybe we should consider adding it in.

It took a while, but I've managed to hit that VM_BUG_ON:

[  707.975456] kernel BUG at include/asm-generic/pgtable.h:724!
[  707.977147] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[  707.978974] Dumping ftrace buffer:
[  707.980110]    (ftrace buffer empty)
[  707.981221] Modules linked in:
[  707.982312] CPU: 18 PID: 9488 Comm: trinity-c538 Not tainted 3.17.0-rc2-next-20140826-sasha-00031-gc48c9ac-dirty #1079
[  707.982801] task: ffff880165e28000 ti: ffff880165e30000 task.ti: ffff880165e30000
[  707.982801] RIP: 0010:[<ffffffffb42e3dda>]  [<ffffffffb42e3dda>] change_protection_range+0x94a/0x970
[  707.982801] RSP: 0018:ffff880165e33d98  EFLAGS: 00010246
[  707.982801] RAX: 000000009d340902 RBX: ffff880511204a08 RCX: 0000000000000100
[  707.982801] RDX: 000000009d340902 RSI: 0000000041741000 RDI: 000000009d340902
[  707.982801] RBP: ffff880165e33e88 R08: ffff880708a23c00 R09: 0000000000b52000
[  707.982801] R10: 0000000000001e01 R11: 0000000000000008 R12: 0000000041751000
[  707.982801] R13: 00000000000000f7 R14: 000000009d340902 R15: 0000000041741000
[  707.982801] FS:  00007f358a9aa700(0000) GS:ffff88071c600000(0000) knlGS:0000000000000000
[  707.982801] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  707.982801] CR2: 00007f3586b69490 CR3: 0000000165d88000 CR4: 00000000000006a0
[  707.982801] Stack:
[  707.982801]  ffff8804db88d058 0000000000000000 ffff88070fb17cf0 0000000000000000
[  707.982801]  ffff880165d88000 0000000000000000 ffff8801686a5000 000000004163e000
[  707.982801]  ffff8801686a5000 0000000000000001 0000000000000025 0000000041750fff
[  707.982801] Call Trace:
[  707.982801]  [<ffffffffb42e3e14>] change_protection+0x14/0x30
[  707.982801]  [<ffffffffb42fda3b>] change_prot_numa+0x1b/0x40
[  707.982801]  [<ffffffffb41ad766>] task_numa_work+0x1f6/0x330
[  707.982801]  [<ffffffffb41937c4>] task_work_run+0xc4/0xf0
[  707.982801]  [<ffffffffb40712e7>] do_notify_resume+0x97/0xb0
[  707.982801]  [<ffffffffb74fd6ea>] int_signal+0x12/0x17
[  707.982801] Code: e8 2c 84 21 03 e9 72 ff ff ff 0f 1f 80 00 00 00 00 0f 0b 48 8b 7d a8 4c 89 f2 4c 89 fe e8 9f 7b 03 00 e9 47 f9 ff ff 0f 0b 0f 0b <0f> 0b 0f 0b 48 8b b5 70 ff ff ff 4c 89 ea 48 89 c7 e8 10 d5 01
[  707.982801] RIP  [<ffffffffb42e3dda>] change_protection_range+0x94a/0x970
[  707.982801]  RSP <ffff880165e33d98>

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#10 lore raw
Quoted 48 lines · Sasha Levin
Quoted 13 lines · Sasha Levin
Quoted 12 lines · Sasha Levin
Quoted 12 lines

Thanks Hugh, Mel. I've added both patches to my local tree and will update tomorrow with the weather.

Also:

Quoted 5 lines · Hugh Dickins
Quoted 5 lines

One thing I did wonder, though: at first I was reassured by the VM_BUG_ON(!pte_present(pte)) you add to pte_mknuma(); but then thought it would be better as VM_BUG_ON(!(val & _PAGE_PRESENT)), being stronger
- asserting that indeed we do not put NUMA hints on PROT_NONE areas. (But I have not tested, perhaps such a VM_BUG_ON would actually fire.)

Quoted 8 lines
Quoted 2 lines
Quoted 2 lines

I've added VM_BUG_ON(!(val & _PAGE_PRESENT)) in just as a curiosity, I'll update how that one looks as well.

Sorry for the rather long delay.

The patch looks fine, the issue didn't reproduce.

The added VM_BUG_ON didn't trigger either, so maybe we should consider adding it in.

It took a while, but I've managed to hit that VM_BUG_ON:

[  707.975456] kernel BUG at include/asm-generic/pgtable.h:724!
[  707.977147] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[  707.978974] Dumping ftrace buffer:
[  707.980110]    (ftrace buffer empty)
[  707.981221] Modules linked in:
[  707.982312] CPU: 18 PID: 9488 Comm: trinity-c538 Not tainted 3.17.0-rc2-next-20140826-sasha-00031-gc48c9ac-dirty #1079
[  707.982801] task: ffff880165e28000 ti: ffff880165e30000 task.ti: ffff880165e30000
[  707.982801] RIP: 0010:[<ffffffffb42e3dda>]  [<ffffffffb42e3dda>] change_protection_range+0x94a/0x970
[  707.982801] RSP: 0018:ffff880165e33d98  EFLAGS: 00010246
[  707.982801] RAX: 000000009d340902 RBX: ffff880511204a08 RCX: 0000000000000100
[  707.982801] RDX: 000000009d340902 RSI: 0000000041741000 RDI: 000000009d340902
[  707.982801] RBP: ffff880165e33e88 R08: ffff880708a23c00 R09: 0000000000b52000
[  707.982801] R10: 0000000000001e01 R11: 0000000000000008 R12: 0000000041751000
[  707.982801] R13: 00000000000000f7 R14: 000000009d340902 R15: 0000000041741000
[  707.982801] FS:  00007f358a9aa700(0000) GS:ffff88071c600000(0000) knlGS:0000000000000000
[  707.982801] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  707.982801] CR2: 00007f3586b69490 CR3: 0000000165d88000 CR4: 00000000000006a0
[  707.982801] Stack:
[  707.982801]  ffff8804db88d058 0000000000000000 ffff88070fb17cf0 0000000000000000
[  707.982801]  ffff880165d88000 0000000000000000 ffff8801686a5000 000000004163e000
[  707.982801]  ffff8801686a5000 0000000000000001 0000000000000025 0000000041750fff
[  707.982801] Call Trace:
[  707.982801]  [<ffffffffb42e3e14>] change_protection+0x14/0x30
Quoted 9 lines
[  707.982801]  [<ffffffffb42fda3b>] change_prot_numa+0x1b/0x40
[  707.982801]  [<ffffffffb41ad766>] task_numa_work+0x1f6/0x330
[  707.982801]  [<ffffffffb41937c4>] task_work_run+0xc4/0xf0
[  707.982801]  [<ffffffffb40712e7>] do_notify_resume+0x97/0xb0
[  707.982801]  [<ffffffffb74fd6ea>] int_signal+0x12/0x17
[  707.982801] Code: e8 2c 84 21 03 e9 72 ff ff ff 0f 1f 80 00 00 00 00 0f 0b 48 8b 7d a8 4c 89 f2 4c 89 fe e8 9f 7b 03 00 e9 47 f9 ff ff 0f 0b 0f 0b <0f> 0b 0f 0b 48 8b b5 70 ff ff ff 4c 89 ea 48 89 c7 e8 10 d5 01
[  707.982801] RIP  [<ffffffffb42e3dda>] change_protection_range+0x94a/0x970
[  707.982801]  RSP <ffff880165e33d98>

The tests to reach here are

pte_present     any of  _PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA
pte_numa        only    _PAGE_NUMA out of _PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA

VM_BUG_ON not set _PAGE_PRESENT

To trigger the bug the PTE bits must then be _PAGE_PROTNONE | _PAGE_NUMA. The NUMA PTE scanner is skipping PROT_NONE VMAs so it should be "impossible" for it to be set there. The mmap_sem is held for read during scans so the protections should not be altering underneath us and the PTL is held against parallel faults.

That leaves setting prot_none leaveing _PAGE_NUMA behind. Potentially that's an issue due to

/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT | \
_PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY | \
_PAGE_SOFT_DIRTY | _PAGE_NUMA)

The _PAGE_NUMA bit is not cleared as removing it potentially leaves the PTE in an unexpected state due to a "present" PTE marked for NUMA hinting fault becoming non-present. Instead there is this check in change_pte_range() to move PTEs to a known state before changing protections

                                if (pte_numa(ptent))
                                        ptent = pte_mknonnuma(ptent);
                                ptent = pte_modify(ptent, newprot);

So right now, I'm not seeing what path gets us to this inconsistent state. Sasha, how long does it typically take to trigger this? Are you using any particular switches for trinity that would trigger the bug faster?

This untested patch might help pinpoint the source of the corruption early though it's x86 only

include/asm-generic/pgtable.h +3 -0
index 281870f..ffea570 100644
@@ -723,6 +723,9 @@ static inline pte_t pte_mknuma(pte_t pte)
 
 	VM_BUG_ON(!(val & _PAGE_PRESENT));
 
+	/* debugging only, specific to x86 */
+	VM_BUG_ON(val & _PAGE_PROTNONE);
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;
 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#11 lore raw
Quoted 3 lines · Mel Gorman

Sasha, how long does it typically take to trigger this? Are you using any particular switches for trinity that would trigger the bug faster?

It took couple of weeks (I've been running with it since the beginning of August). I don't have any special trinity options, just the default fuzzing. Do you think that focusing on any of the mm syscalls would increase the odds of hitting it?

There's always the chance that this is a fluke due to corruption somewhere else. I'll keep running it with the new debug patch and if it won't reproduce any time soon we can probably safely assume that.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#12 lore raw
In reply to Mel Gorman

include/asm-generic/pgtable.h static inline pte_t pte_mknuma(pte_t pte) · line 730

Quoted 13 lines · Mel Gorman
include/asm-generic/pgtable.h +3 -0
index 281870f..ffea570 100644
@@ -723,6 +723,9 @@ static inline pte_t pte_mknuma(pte_t pte)
 
 	VM_BUG_ON(!(val & _PAGE_PRESENT));
 
+	/* debugging only, specific to x86 */
+	VM_BUG_ON(val & _PAGE_PROTNONE);
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;

Triggered again, the first VM_BUG_ON got hit, the second one never did.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#13 lore raw
Quoted 7 lines · Sasha Levin
Quoted 6 lines · Mel Gorman
Quoted 6 lines
include/asm-generic/pgtable.h +0 -0
index 281870f..ffea570 100644
@@ -723,6 +723,9 @@ static inline pte_t pte_mknuma(pte_t pte)
 
Quoted 8 lines
Quoted 7 lines

include/asm-generic/pgtable.h static inline pte_t pte_mknuma(pte_t pte) · line 730

Quoted 7 lines
include/asm-generic/pgtable.h +3 -0
 	VM_BUG_ON(!(val & _PAGE_PRESENT));
 
+	/* debugging only, specific to x86 */
+	VM_BUG_ON(val & _PAGE_PROTNONE);
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;

Triggered again, the first VM_BUG_ON got hit, the second one never did.

Okay, this bug has reproduced quite a few times since then that I no longer suspect it's random memory corruption. I'd be happy to try out more debug patches if you have any leads.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#14 lore raw
Quoted 17 lines · Sasha Levin
Quoted 7 lines · Sasha Levin
Quoted 6 lines · Mel Gorman
Quoted 6 lines
include/asm-generic/pgtable.h +0 -0
index 281870f..ffea570 100644
@@ -723,6 +723,9 @@ static inline pte_t pte_mknuma(pte_t pte)
 
Quoted 8 lines
Quoted 7 lines

include/asm-generic/pgtable.h static inline pte_t pte_mknuma(pte_t pte) · line 730

Quoted 7 lines
include/asm-generic/pgtable.h +3 -0
 	VM_BUG_ON(!(val & _PAGE_PRESENT));
 
+	/* debugging only, specific to x86 */
+	VM_BUG_ON(val & _PAGE_PROTNONE);
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;

Triggered again, the first VM_BUG_ON got hit, the second one never did.

Quoted 4 lines

Okay, this bug has reproduced quite a few times since then that I no longer suspect it's random memory corruption. I'd be happy to try out more debug patches if you have any leads.

The fact the second one doesn't trigger makes me think that this is not related to how the helpers are called and is instead relating to timing. I tried reproducing this but got nothing after 3 hours. How long does it typically take to reproduce in a given run? You mentioned that it takes a few weeks to hit but maybe the frequency has changed since. I tried todays linux-next kernel but it didn't even boot so next-20140826 to match your original report but got nothing. Can you also send me the config you used in case that's a factor.

I had one hunch that this may somehow be related to a collision between pagetable teardown during exit and the scanner but I could not find a way that could actually happen. During teardown there should be only one user of the mm and it can't race with itself.

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

Signature · 8 lines
Mel Gorman
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
#15 lore raw
Quoted 23 lines · Mel Gorman
Quoted 17 lines · Sasha Levin
Quoted 7 lines · Sasha Levin
Quoted 6 lines · Mel Gorman
Quoted 6 lines
include/asm-generic/pgtable.h +0 -0
index 281870f..ffea570 100644
@@ -723,6 +723,9 @@ static inline pte_t pte_mknuma(pte_t pte)
 
Quoted 8 lines
Quoted 7 lines

include/asm-generic/pgtable.h static inline pte_t pte_mknuma(pte_t pte) · line 730

Quoted 7 lines
include/asm-generic/pgtable.h +3 -0
 	VM_BUG_ON(!(val & _PAGE_PRESENT));
 
+	/* debugging only, specific to x86 */
+	VM_BUG_ON(val & _PAGE_PROTNONE);
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;

Triggered again, the first VM_BUG_ON got hit, the second one never did.

Quoted 4 lines

Okay, this bug has reproduced quite a few times since then that I no longer suspect it's random memory corruption. I'd be happy to try out more debug patches if you have any leads.

Quoted 8 lines

The fact the second one doesn't trigger makes me think that this is not related to how the helpers are called and is instead relating to timing. I tried reproducing this but got nothing after 3 hours. How long does it typically take to reproduce in a given run? You mentioned that it takes a few weeks to hit but maybe the frequency has changed since. I tried todays linux-next kernel but it didn't even boot so next-20140826 to match your original report but got nothing. Can you also send me the config you used in case that's a factor.

The frequency seems to have changed, I can trigger this 5-10 times a day now.

Config is attached.

Thanks,
Sasha

Quoted 10 lines

I had one hunch that this may somehow be related to a collision between pagetable teardown during exit and the scanner but I could not find a way that could actually happen. During teardown there should be only one user of the mm and it can't race with itself.

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.17.0-rc4 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION="-sasha"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_NO_HZ_FULL_ALL=y
CONFIG_NO_HZ_FULL_SYSIDLE=y
CONFIG_NO_HZ_FULL_SYSIDLE_SMALL=8
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_RCU_USER_QS=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FANOUT_EXACT=y
CONFIG_RCU_FAST_NO_HZ=y
CONFIG_TREE_RCU_TRACE=y
CONFIG_RCU_BOOST=y
CONFIG_RCU_BOOST_PRIO=10
CONFIG_RCU_BOOST_DELAY=500
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_NONE=y
# CONFIG_RCU_NOCB_CPU_ZERO is not set
# CONFIG_RCU_NOCB_CPU_ALL is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_LOG_CPU_MAX_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_NUMA_BALANCING=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
CONFIG_CC_STACKPROTECTOR_REGULAR=y
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_BLK_CMDLINE_PARSER=y

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_QUEUE_RWLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
CONFIG_X86_VSMP=y
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_XEN=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=500
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DEBUG_FS=y
CONFIG_XEN_PVH=y
CONFIG_KVM_GUEST=y
CONFIG_KVM_DEBUG_FS=y
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=12
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MOVABLE_NODE=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NEED_BOUNCE_POOL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_ZSMALLOC=y
CONFIG_PGTABLE_MAPPING=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_HZ_10000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_RANDOMIZE_BASE_MAX_OFFSET=0x40000000
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
CONFIG_DEBUG_HOTPLUG_CPU0=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=0
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
CONFIG_DPM_WATCHDOG=y
CONFIG_DPM_WATCHDOG_TIMEOUT=12
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=y
CONFIG_ACPI_EXTLOG=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#

# x86 CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_AMD_FREQ_SENSITIVITY=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_P4_CLOCKMOD=y

#

# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
CONFIG_RAPIDIO_DMA_ENGINE=y
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
CONFIG_X86_SYSFB=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_X86_X32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_IOSF_MBI=m
CONFIG_PMC_ATOM=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=y
CONFIG_NET_UDP_TUNNEL=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
CONFIG_IPV6_GRE=y
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_LOG_COMMON=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NF_CT_NETLINK_HELPER=y
CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_NF_NAT_PROTO_DCCP=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_SIP=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NETFILTER_SYNPROXY=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NFT_EXTHDR=y
CONFIG_NFT_META=y
CONFIG_NFT_CT=y
CONFIG_NFT_RBTREE=y
CONFIG_NFT_HASH=y
CONFIG_NFT_COUNTER=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_NAT=y
CONFIG_NFT_QUEUE=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_HMARK=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_NAT=y
CONFIG_NETFILTER_XT_TARGET_NETMAP=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_REDIRECT=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_BPF=y
CONFIG_NETFILTER_XT_MATCH_CGROUP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPCOMP=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_L2TP=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=y
CONFIG_NFT_CHAIN_NAT_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_NAT_IPV4=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_SYNPROXY=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=y
CONFIG_NFT_CHAIN_NAT_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_NF_NAT_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_TARGET_SYNPROXY=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
CONFIG_IP6_NF_NAT=y
CONFIG_IP6_NF_TARGET_MASQUERADE=y
CONFIG_IP6_NF_TARGET_NPT=y

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_LOG_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
CONFIG_BRIDGE_EBT_802_3=y
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
CONFIG_BRIDGE_EBT_STP=y
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
CONFIG_BRIDGE_EBT_REDIRECT=y
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration
#
CONFIG_IP_DCCP_CCID2_DEBUG=y
CONFIG_IP_DCCP_CCID3=y
CONFIG_IP_DCCP_CCID3_DEBUG=y
CONFIG_IP_DCCP_TFRC_LIB=y
CONFIG_IP_DCCP_TFRC_DEBUG=y

#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=y
# CONFIG_NET_SCTPPROBE is not set
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_MEDIA_IB=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_MRP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=y
CONFIG_LAPB=y
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=y
CONFIG_IEEE802154=y
CONFIG_IEEE802154_6LOWPAN=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_SCH_PLUG=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_CANID=y
CONFIG_NET_EMATCH_IPSET=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_OPENVSWITCH_VXLAN=y
CONFIG_VSOCKETS=y
CONFIG_VMWARE_VMCI_VSOCKETS=y
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=y
CONFIG_NET_MPLS_GSO=y
CONFIG_HSR=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_CAN_GW=y

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_SLCAN=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_LEDS=y
CONFIG_CAN_JANZ_ICAN3=y
CONFIG_CAN_SJA1000=y
CONFIG_CAN_SJA1000_ISA=y
CONFIG_CAN_SJA1000_PLATFORM=y
CONFIG_CAN_EMS_PCMCIA=y
CONFIG_CAN_EMS_PCI=y
CONFIG_CAN_PEAK_PCMCIA=y
CONFIG_CAN_PEAK_PCI=y
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_KVASER_PCI=y
CONFIG_CAN_PLX_PCI=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_C_CAN_PCI=y
CONFIG_CAN_M_CAN=y
CONFIG_CAN_CC770=y
CONFIG_CAN_CC770_ISA=y
CONFIG_CAN_CC770_PLATFORM=y

#
# CAN SPI interfaces
#
CONFIG_CAN_MCP251X=y

#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_ESD_USB2=y
CONFIG_CAN_GS_USB=y
CONFIG_CAN_KVASER_USB=y
CONFIG_CAN_PEAK_USB=y
CONFIG_CAN_8DEV_USB=y
CONFIG_CAN_SOFTING=y
CONFIG_CAN_SOFTING_CS=y
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_6LOWPAN=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIBCM203X=y
CONFIG_BT_HCIBPA10X=y
CONFIG_BT_HCIBFUSB=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
CONFIG_BT_HCIBLUECARD=y
CONFIG_BT_HCIBTUART=y
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=y
CONFIG_BT_MRVL_SDIO=y
CONFIG_BT_ATH3K=y
CONFIG_BT_WILINK=y
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_CERTIFICATION_ONUS=y
CONFIG_CFG80211_REG_CELLULAR_HINTS=y
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
CONFIG_MAC80211_STA_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
CONFIG_MAC80211_PS_DEBUG=y
CONFIG_MAC80211_MPL_DEBUG=y
CONFIG_MAC80211_MPATH_DEBUG=y
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=y
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_NET_9P_RDMA=y
CONFIG_NET_9P_DEBUG=y
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
CONFIG_CEPH_LIB_PRETTYDEBUG=y
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
CONFIG_NFC_HCI=y
CONFIG_NFC_SHDLC=y

#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_PN533=y
CONFIG_NFC_WILINK=y
CONFIG_NFC_TRF7970A=y
CONFIG_NFC_MEI_PHY=y
CONFIG_NFC_SIM=y
CONFIG_NFC_PORT100=y
CONFIG_NFC_PN544=y
CONFIG_NFC_PN544_I2C=y
CONFIG_NFC_PN544_MEI=y
CONFIG_NFC_MICROREAD=y
CONFIG_NFC_MICROREAD_I2C=y
CONFIG_NFC_MICROREAD_MEI=y
CONFIG_NFC_MRVL=y
CONFIG_NFC_MRVL_USB=y
CONFIG_NFC_ST21NFCA=y
CONFIG_NFC_ST21NFCA_I2C=y
CONFIG_NFC_ST21NFCB=y
CONFIG_NFC_ST21NFCB_I2C=y
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
CONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_FENCE_TRACE=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=256
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AR7_PARTS=y

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
CONFIG_RFD_FTL=y
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_SWAP=y

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_I8=y
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_COMPAT=y
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SBC_GXX=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=y
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_L440GX=y
CONFIG_MTD_PCI=y
CONFIG_MTD_PCMCIA=y
CONFIG_MTD_PCMCIA_ANONYMOUS=y
CONFIG_MTD_GPIO_ADDR=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_LATCH_ADDR=y

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
CONFIG_MTD_PMC551_BUGFIX=y
CONFIG_MTD_PMC551_DEBUG=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND_ECC_SMC=y CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_SM_COMMON=y CONFIG_MTD_NAND_DENALI=y CONFIG_MTD_NAND_DENALI_PCI=y CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 CONFIG_MTD_NAND_GPIO=y CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_RICOH=y CONFIG_MTD_NAND_DISKONCHIP=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y CONFIG_MTD_NAND_DOCG4=y CONFIG_MTD_NAND_CAFE=y CONFIG_MTD_NAND_NANDSIM=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=y CONFIG_MTD_ONENAND_OTP=y CONFIG_MTD_ONENAND_2X_PROGRAM=y

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=2
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_MTD_UBI_BLOCK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
CONFIG_ZRAM=y
CONFIG_ZRAM_LZ4_COMPRESS=y
CONFIG_ZRAM_DEBUG=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_NVME=y
CONFIG_BLK_DEV_SKD=y
CONFIG_BLK_DEV_OSD=y
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_BLK_DEV_RBD=y
CONFIG_BLK_DEV_RSXX=y

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_SGI_XP=y
CONFIG_HP_ILO=y
CONFIG_SGI_GRU=y
CONFIG_SGI_GRU_DEBUG=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1780=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=y
CONFIG_VMWARE_BALLOON=y
CONFIG_BMP085=y
CONFIG_BMP085_I2C=y
CONFIG_BMP085_SPI=y
CONFIG_USB_SWITCH_FSA9480=y
CONFIG_LATTICE_ECP3_CONFIG=y
CONFIG_SRAM=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline #
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y

#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_INTEL_MEI_TXE=y
CONFIG_VMWARE_VMCI=y

#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=y

#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=y

#
# Intel MIC Card Driver
#
CONFIG_INTEL_MIC_CARD=y
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=1
CONFIG_ECHO=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_CXGB4_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_SCSI_BNX2X_FCOE=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
CONFIG_SCSI_3W_SAS=y
CONFIG_SCSI_ACARD=y
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
CONFIG_SCSI_ARCMSR=y
CONFIG_SCSI_ESAS2R=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
CONFIG_SCSI_MPT3SAS=y
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_LOGGING=y
CONFIG_SCSI_UFSHCD=y
CONFIG_SCSI_UFSHCD_PCI=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
CONFIG_SCSI_HPTIOP=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_FLASHPOINT=y
CONFIG_VMWARE_PVSCSI=y
CONFIG_XEN_SCSI_FRONTEND=y
CONFIG_HYPERV_STORAGE=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=y
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_TCM_QLA2XXX=y
CONFIG_SCSI_QLA_ISCSI=y
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
CONFIG_SCSI_DEBUG=y
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_VIRTIO=y
CONFIG_SCSI_CHELSIO_FCOE=y
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_SX4=y
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_JMICRON=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SCH=y
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y

#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
CONFIG_PATA_MPIIX=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_PCMCIA=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_RZ1000=y

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BCACHE=y
CONFIG_BCACHE_DEBUG=y
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_BIO_PRISON=y
CONFIG_DM_PERSISTENT_DATA=y
CONFIG_DM_DEBUG_BLOCK_STACK_TRACING=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=y
CONFIG_DM_CACHE=y
CONFIG_DM_CACHE_MQ=y
CONFIG_DM_CACHE_CLEANER=y
CONFIG_DM_ERA=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_RAID=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_MULTIPATH_QL=y
CONFIG_DM_MULTIPATH_ST=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=y
CONFIG_DM_VERITY=y
CONFIG_DM_SWITCH=y
CONFIG_TARGET_CORE=y
CONFIG_TCM_IBLOCK=y
CONFIG_TCM_FILEIO=y
CONFIG_TCM_PSCSI=y
CONFIG_LOOPBACK_TARGET=y
CONFIG_TCM_FC=y
CONFIG_ISCSI_TARGET=y
CONFIG_SBP_TARGET=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_SBP2=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=y
CONFIG_DUMMY=y
CONFIG_EQUALIZER=y
CONFIG_NET_FC=y
CONFIG_IFB=y
CONFIG_NET_TEAM=y
CONFIG_NET_TEAM_MODE_BROADCAST=y
CONFIG_NET_TEAM_MODE_ROUNDROBIN=y
CONFIG_NET_TEAM_MODE_RANDOM=y
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
CONFIG_NET_TEAM_MODE_LOADBALANCE=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_VXLAN=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=y
CONFIG_RIONET=y
CONFIG_RIONET_TX_SIZE=128
CONFIG_RIONET_RX_SIZE=128
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_VIRTIO_NET=y
CONFIG_NLMON=y
CONFIG_SUNGEM_PHY=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_ARCNET_COM20020_CS=y
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=y
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
CONFIG_ATM_ENI_TUNE_BURST=y
CONFIG_ATM_ENI_BURST_TX_16W=y
CONFIG_ATM_ENI_BURST_TX_8W=y
CONFIG_ATM_ENI_BURST_TX_4W=y
CONFIG_ATM_ENI_BURST_TX_2W=y
CONFIG_ATM_ENI_BURST_RX_16W=y
CONFIG_ATM_ENI_BURST_RX_8W=y
CONFIG_ATM_ENI_BURST_RX_4W=y
CONFIG_ATM_ENI_BURST_RX_2W=y
CONFIG_ATM_FIRESTREAM=y
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
CONFIG_ATM_AMBASSADOR_DEBUG=y
CONFIG_ATM_HORIZON=y
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
CONFIG_ATM_FORE200E=y
CONFIG_ATM_FORE200E_USE_TASKLET=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_ATM_SOLOS=y

#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_CAIF_SPI_SLAVE=y
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=y
CONFIG_CAIF_VIRTIO=y
CONFIG_VHOST_NET=y
CONFIG_VHOST_SCSI=m
CONFIG_VHOST_RING=y
CONFIG_VHOST=y

#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_BCM_SF2=y
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_PCMCIA_3C574=y
CONFIG_PCMCIA_3C589=y
CONFIG_VORTEX=y
CONFIG_TYPHOON=y
CONFIG_NET_VENDOR_ADAPTEC=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_NET_VENDOR_ALTEON=y
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_ALTERA_TSE=y
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=y
CONFIG_PCNET32=y
CONFIG_PCMCIA_NMCLAN=y
CONFIG_NET_XGENE=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_ALX=y
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_TIGON3=y
CONFIG_BNX2X=y
CONFIG_BNX2X_SRIOV=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=y
CONFIG_NET_VENDOR_CHELSIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4=y
CONFIG_CHELSIO_T4_DCB=y
CONFIG_CHELSIO_T4VF=y
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=y
CONFIG_CX_ECAT=y
CONFIG_DNET=y
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=y
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=y
CONFIG_WINBOND_840=y
CONFIG_DM9102=y
CONFIG_ULI526X=y
CONFIG_PCMCIA_XIRCOM=y
CONFIG_NET_VENDOR_DLINK=y
CONFIG_DL2K=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=y
CONFIG_BE2NET_VXLAN=y
CONFIG_NET_VENDOR_EXAR=y
CONFIG_S2IO=y
CONFIG_VXGE=y
CONFIG_VXGE_DEBUG_TRACE_ALL=y
CONFIG_NET_VENDOR_FUJITSU=y
CONFIG_PCMCIA_FMVJ18X=y
CONFIG_NET_VENDOR_HP=y
CONFIG_HP100=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_IXGB=y
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=y
CONFIG_I40E=y
CONFIG_I40E_VXLAN=y
CONFIG_I40E_DCB=y
# CONFIG_I40EVF is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_IP1000=y
CONFIG_JME=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_EN_VXLAN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_MLX5_CORE=y
CONFIG_NET_VENDOR_MICREL=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
CONFIG_KSZ884X_PCI=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_FEALNX=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NATSEMI=y
CONFIG_NS83820=y
CONFIG_NET_VENDOR_8390=y
CONFIG_PCMCIA_AXNET=y
CONFIG_NE2K_PCI=y
CONFIG_PCMCIA_PCNET=y
CONFIG_NET_VENDOR_NVIDIA=y
CONFIG_FORCEDETH=y
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=y
CONFIG_NET_PACKET_ENGINE=y
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=y
CONFIG_QLCNIC=y
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_VXLAN=y
CONFIG_QLCNIC_HWMON=y
CONFIG_QLGE=y
CONFIG_NETXEN_NIC=y
CONFIG_NET_VENDOR_REALTEK=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
CONFIG_R8169=y
CONFIG_NET_VENDOR_RDC=y
CONFIG_R6040=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_SXGBE_ETH=y
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
CONFIG_SC92031=y
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=y
CONFIG_SIS190=y
CONFIG_SFC=y
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_NET_VENDOR_SMSC=y
CONFIG_PCMCIA_SMC91C92=y
CONFIG_EPIC100=y
CONFIG_SMSC911X=y
# CONFIG_SMSC911X_ARCH_HOOKS is not set
CONFIG_SMSC9420=y
CONFIG_NET_VENDOR_STMICRO=y
CONFIG_STMMAC_ETH=y
CONFIG_STMMAC_PLATFORM=y
CONFIG_STMMAC_PCI=y
CONFIG_STMMAC_DEBUG_FS=y
CONFIG_STMMAC_DA=y
CONFIG_NET_VENDOR_SUN=y
CONFIG_HAPPYMEAL=y
CONFIG_SUNGEM=y
CONFIG_CASSINI=y
CONFIG_NIU=y
CONFIG_NET_VENDOR_TEHUTI=y
CONFIG_TEHUTI=y
CONFIG_NET_VENDOR_TI=y
CONFIG_TLAN=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_VELOCITY=y
CONFIG_NET_VENDOR_WIZNET=y
CONFIG_WIZNET_W5100=y
CONFIG_WIZNET_W5300=y
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not set
CONFIG_WIZNET_BUS_ANY=y
CONFIG_NET_VENDOR_XIRCOM=y
CONFIG_PCMCIA_XIRC2PS=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
CONFIG_SKFP=y
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=y
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_NET_SB1000=y
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=y
CONFIG_AMD_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM7XXX_PHY=y
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_MDIO_BCM_UNIMAC=y
CONFIG_MICREL_KS8995MA=y
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=y
CONFIG_PPPOE=y
CONFIG_PPTP=y
CONFIG_PPPOL2TP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_SLIP=y
CONFIG_SLHC=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=y
CONFIG_USB_NET_HUAWEI_CDC_NCM=y
CONFIG_USB_NET_CDC_MBIM=y
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SR9700=y
CONFIG_USB_NET_SR9800=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=y
CONFIG_USB_NET_KALMIA=y
CONFIG_USB_NET_QMI_WWAN=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=y
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_LIBERTAS_THINFIRM=y
CONFIG_LIBERTAS_THINFIRM_DEBUG=y
CONFIG_LIBERTAS_THINFIRM_USB=y
CONFIG_AIRO=y
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_PCMCIA_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_AIRO_CS=y
CONFIG_PCMCIA_WL3501=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=y
CONFIG_MAC80211_HWSIM=y
CONFIG_MWL8K=y
CONFIG_ATH_COMMON=y
CONFIG_ATH_CARDS=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS=y
CONFIG_ATH_REG_DYNAMIC_USER_CERT_TESTING=y
CONFIG_ATH5K=y
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH5K_TEST_CHANNELS=y
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K_DFS_DEBUGFS=y
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_DFS_CERTIFIED=y
CONFIG_ATH9K_TX99=y
CONFIG_ATH9K_WOW=y
CONFIG_ATH9K_RFKILL=y
CONFIG_ATH9K_CHANNEL_CONTEXT=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_CARL9170=y
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
CONFIG_CARL9170_HWRNG=y
CONFIG_ATH6KL=y
# CONFIG_ATH6KL_SDIO is not set
# CONFIG_ATH6KL_USB is not set
# CONFIG_ATH6KL_DEBUG is not set
CONFIG_ATH6KL_TRACING=y
CONFIG_ATH6KL_REGDOMAIN=y
CONFIG_AR5523=y
CONFIG_WIL6210=y
CONFIG_WIL6210_ISR_COR=y
CONFIG_WIL6210_TRACING=y
CONFIG_ATH10K=y
CONFIG_ATH10K_PCI=y
CONFIG_ATH10K_DEBUG=y
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_TRACING=y
CONFIG_ATH10K_DFS_CERTIFIED=y
CONFIG_WCN36XX=y
CONFIG_WCN36XX_DEBUGFS=y
CONFIG_B43=y
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_PCMCIA=y
CONFIG_B43_SDIO=y
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
CONFIG_B43_PHY_G=y
CONFIG_B43_PHY_N=y
CONFIG_B43_PHY_LP=y
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=y
CONFIG_BRCMSMAC=y
CONFIG_BRCMFMAC=y
CONFIG_BRCMFMAC_SDIO=y
CONFIG_BRCMFMAC_USB=y
CONFIG_BRCMFMAC_PCIE=y
CONFIG_BRCM_TRACING=y
CONFIG_BRCMDBG=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_IPW2100=y
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=y
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=y
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
CONFIG_IWLWIFI_BCAST_FILTERING=y
CONFIG_IWLWIFI_UAPSD=y

#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
CONFIG_IWLWIFI_DEBUGFS=y
CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
CONFIG_IWLWIFI_DEVICE_TRACING=y
CONFIG_IWLEGACY=y
CONFIG_IWL4965=y
CONFIG_IWL3945=y

#

# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_CS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_LIBERTAS_SPI=y
CONFIG_LIBERTAS_DEBUG=y
CONFIG_LIBERTAS_MESH=y
CONFIG_HERMES=y
CONFIG_HERMES_PRISM=y
CONFIG_HERMES_CACHE_FW_ON_INIT=y
CONFIG_PLX_HERMES=y
CONFIG_TMD_HERMES=y
CONFIG_NORTEL_HERMES=y
CONFIG_PCI_HERMES=y
CONFIG_PCMCIA_HERMES=y
CONFIG_PCMCIA_SPECTRUM=y
CONFIG_ORINOCO_USB=y
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
CONFIG_P54_SPI=y
CONFIG_P54_SPI_DEFAULT_EEPROM=y
CONFIG_P54_LEDS=y
CONFIG_RT2X00=y
CONFIG_RT2400PCI=y
CONFIG_RT2500PCI=y
CONFIG_RT61PCI=y
CONFIG_RT2800PCI=y
CONFIG_RT2800PCI_RT33XX=y
CONFIG_RT2800PCI_RT35XX=y
CONFIG_RT2800PCI_RT53XX=y
CONFIG_RT2800PCI_RT3290=y
CONFIG_RT2500USB=y
CONFIG_RT73USB=y
CONFIG_RT2800USB=y
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT3573=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_RT55XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2800_LIB=y
CONFIG_RT2800_LIB_MMIO=y
CONFIG_RT2X00_LIB_MMIO=y
CONFIG_RT2X00_LIB_PCI=y
CONFIG_RT2X00_LIB_USB=y
CONFIG_RT2X00_LIB=y
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2X00_LIB_CRYPTO=y
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_RTL_CARDS=y
CONFIG_RTL8192CE=y
CONFIG_RTL8192SE=y
CONFIG_RTL8192DE=y
CONFIG_RTL8723AE=y
CONFIG_RTL8723BE=y
CONFIG_RTL8188EE=y
CONFIG_RTL8192CU=y
CONFIG_RTLWIFI=y
CONFIG_RTLWIFI_PCI=y
CONFIG_RTLWIFI_USB=y
CONFIG_RTLWIFI_DEBUG=y
CONFIG_RTL8192C_COMMON=y
CONFIG_RTL8723_COMMON=y
CONFIG_RTLBTCOEXIST=y
CONFIG_WL_TI=y
CONFIG_WL1251=y
CONFIG_WL1251_SPI=y
CONFIG_WL1251_SDIO=y
CONFIG_WL12XX=y
CONFIG_WL18XX=y
CONFIG_WLCORE=y
CONFIG_WLCORE_SPI=y
CONFIG_WLCORE_SDIO=y
CONFIG_WILINK_PLATFORM_DATA=y
CONFIG_ZD1211RW=y
CONFIG_ZD1211RW_DEBUG=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_MWIFIEX_PCIE=y
CONFIG_MWIFIEX_USB=y
CONFIG_CW1200=y
CONFIG_CW1200_WLAN_SDIO=y
CONFIG_CW1200_WLAN_SPI=y
CONFIG_RSI_91X=y
CONFIG_RSI_DEBUGFS=y
CONFIG_RSI_SDIO=y
CONFIG_RSI_USB=y

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=y
CONFIG_WIMAX_I2400M_USB=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=y
CONFIG_WANXL=y
CONFIG_PC300TOO=y
CONFIG_FARSYNC=y
# CONFIG_DSCC4 is not set
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
CONFIG_LAPBETHER=y
CONFIG_X25_ASY=y
CONFIG_SBNI=y
CONFIG_SBNI_MULTILINE=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKEHARD=y
CONFIG_IEEE802154_FAKELB=y
CONFIG_IEEE802154_AT86RF230=y
CONFIG_IEEE802154_MRF24J40=y
CONFIG_IEEE802154_CC2520=y
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_NETDEV_BACKEND=y
CONFIG_VMXNET3=y
CONFIG_HYPERV_NET=y
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=y
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=y

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=y

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=y
CONFIG_HISAX_ELSA_CS=y
CONFIG_HISAX_AVM_A1_CS=y
CONFIG_HISAX_TELES_CS=y

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=y
CONFIG_HISAX_HFCUSB=y
CONFIG_HISAX_HFC4S8S=y
CONFIG_HISAX_FRITZ_PCIPNP=y

#
# Active cards
#
CONFIG_ISDN_CAPI=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_CAPI20=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPIDRV=y
CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE=y

#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=y
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
CONFIG_ISDN_DRV_AVMB1_AVM_CS=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=y
CONFIG_ISDN_DRV_AVMB1_C4=y
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=y
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=y
CONFIG_ISDN_DIVAS_USERIDI=y
# CONFIG_ISDN_DIVAS_MAINT is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_CAPI=y
# CONFIG_GIGASET_I4L is not set
# CONFIG_GIGASET_DUMMYLL is not set
CONFIG_GIGASET_BASE=y
CONFIG_GIGASET_M105=y
CONFIG_GIGASET_M101=y
CONFIG_GIGASET_DEBUG=y
# CONFIG_HYSDN is not set
CONFIG_MISDN=y
CONFIG_MISDN_DSP=y
CONFIG_MISDN_L1OIP=y

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=y
CONFIG_MISDN_HFCMULTI=y
CONFIG_MISDN_HFCUSB=y
CONFIG_MISDN_AVMFRITZ=y
CONFIG_MISDN_SPEEDFAX=y
CONFIG_MISDN_INFINEON=y
CONFIG_MISDN_W6692=y
CONFIG_MISDN_NETJET=y
CONFIG_MISDN_IPAC=y
CONFIG_MISDN_ISAR=y
CONFIG_ISDN_HDLC=y

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_TC3589X=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
CONFIG_MOUSE_SYNAPTICS_USB=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_AS5011=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_HANWANG=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_SERIAL_WACOM4=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879_SPI=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_AUO_PIXCIR=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CY8CTMG110=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
CONFIG_TOUCHSCREEN_CYTTSP4_I2C=y
CONFIG_TOUCHSCREEN_CYTTSP4_SPI=y
CONFIG_TOUCHSCREEN_DA9034=y
CONFIG_TOUCHSCREEN_DA9052=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_ILI210X=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_WACOM_I2C=y
CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MCS5000=y
CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_ELO=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_TOUCHSCREEN_ST1232=y
CONFIG_TOUCHSCREEN_SUR40=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_TOUCHSCREEN_ZFORCE=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_88PM80X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
CONFIG_INPUT_BMA150=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_MAX8925_ONKEY=y
CONFIG_INPUT_MAX8997_HAPTIC=y
CONFIG_INPUT_MC13783_PWRBUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_GP2A=y
CONFIG_INPUT_GPIO_BEEPER=y
CONFIG_INPUT_GPIO_TILT_POLLED=y
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_KXTJ9=y
CONFIG_INPUT_KXTJ9_POLLED_MODE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_INPUT_TWL4030_VIBRA=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF50633_PMU=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_PWM_BEEPER=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
CONFIG_INPUT_DA9052_ONKEY=y
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
CONFIG_INPUT_ADXL34X=y
CONFIG_INPUT_ADXL34X_I2C=y
CONFIG_INPUT_ADXL34X_SPI=y
CONFIG_INPUT_IMS_PCU=y
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
CONFIG_INPUT_DRV260X_HAPTICS=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_HYPERV_KEYBOARD=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
CONFIG_CYCLADES=y
CONFIG_CYZ_INTR=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DW=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_MRST_MAX3110=y
CONFIG_SERIAL_MFD_HSU=y
CONFIG_SERIAL_MFD_HSU_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
CONFIG_SERIAL_IFX6X60=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_MEN_Z135=y
CONFIG_TTY_PRINTK=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=y
CONFIG_IPWIRELESS=y
CONFIG_MWAVE=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_UV_MMTIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_TIS_I2C_ATMEL=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_TCG_TIS_I2C_NUVOTON=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
CONFIG_TCG_ST33_I2C=y
CONFIG_TCG_XEN=y
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# ACPI drivers
#
CONFIG_I2C_SCMI=y

#
# I2C system bus drivers (mostly embedded / system-on-chip) #
CONFIG_I2C_CBUS_GPIO=y CONFIG_I2C_DESIGNWARE_CORE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_PCI=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_ROBOTFUZZ_OSIF=y
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
CONFIG_I2C_VIPERBOARD=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX_DMA=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_SC18IS602=y
CONFIG_SPI_XCOMM=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MID_DMA=y
CONFIG_SPI_DW_MMIO=y

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
CONFIG_SPMI=y
CONFIG_HSI=y
CONFIG_HSI_BOARDINFO=y

#
# HSI controllers
#

#
# HSI clients
#
CONFIG_HSI_CHAR=y

#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y

#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_PPS_CLIENT_GPIO=y

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=y
CONFIG_PINCTRL=y

#
# Pin controllers
#
CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_F7188X=y
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_SCH=y
CONFIG_GPIO_ICH=y
CONFIG_GPIO_VX855=y
CONFIG_GPIO_LYNXPOINT=y

#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_SX150X=y
CONFIG_GPIO_TC3589X=y
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_TWL6040=y
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8350=y
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y

#
# PCI GPIO expanders:
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_INTEL_MID=y
CONFIG_GPIO_ML_IOH=y
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y

#
# AC97 GPIO expanders:
#

#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=y

#
# MODULbus GPIO expanders:
#
CONFIG_GPIO_JANZ_TTL=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y

#
# USB GPIO expanders:
#
CONFIG_GPIO_VIPERBOARD=y
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
CONFIG_WM8350_POWER=y
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_BQ27X00_I2C=y
CONFIG_BATTERY_BQ27X00_PLATFORM=y
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_BATTERY_TWL4030_MADC=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_PCF50633=y
CONFIG_BATTERY_RX51=y
CONFIG_CHARGER_ISP1704=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_TWL4030=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_LP8788=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_MAX14577=y
# CONFIG_CHARGER_MAX8997 is not set
# CONFIG_CHARGER_MAX8998 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_POWER_RESET=y
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7314=y
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_MC13783_ADC=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
# CONFIG_SENSORS_G762 is not set
CONFIG_SENSORS_GPIO_FAN=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IIO_HWMON=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_MAX6697=y
CONFIG_SENSORS_HTU21=y
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_NTC_THERMISTOR=y
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_UCD9000=y
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_SHT15=y
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHTC1=y
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
CONFIG_SENSORS_EMC6W201=y
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_SMM665=y
CONFIG_SENSORS_ADC128D818=y
CONFIG_SENSORS_ADS1015=y
CONFIG_SENSORS_ADS7828=y
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_TWL4030_MADC=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
CONFIG_SENSORS_W83795=y
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=y
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_THERMAL_EMULATION=y CONFIG_INTEL_POWERCLAMP=y CONFIG_X86_PKG_TEMP_THERMAL=y CONFIG_ACPI_INT3403_THERMAL=y CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
CONFIG_XILINX_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_RETU_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_KEMPLD_WDT=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_MEN_A21_WDT=y
# CONFIG_XEN_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_HOST_SOC=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_EZX_PCAP=y
CONFIG_MFD_VIPERBOARD=y
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=y
CONFIG_MFD_RTSX_USB=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RN5T618=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_WM5102=y
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
CONFIG_REGULATOR_ANATOP=y
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_AB3100=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA903X=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
CONFIG_REGULATOR_LP8788=y
CONFIG_REGULATOR_LTC3589=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX8998=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PCAP=y
# CONFIG_REGULATOR_PCF50633 is not set
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS6105X=y
CONFIG_REGULATOR_TPS62360=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS6524X=y
CONFIG_REGULATOR_TPS6586X=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TPS65912=y
CONFIG_REGULATOR_TPS80031=y
CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8350=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_WM8994=y
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DVB=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
CONFIG_VIDEOBUF2_DVB=y
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y

#
# Media drivers
#
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
CONFIG_IR_MCE_KBD_DECODER=y
CONFIG_IR_XMP_DECODER=y
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=y
CONFIG_IR_ENE=y
CONFIG_IR_IMON=y
CONFIG_IR_MCEUSB=y
CONFIG_IR_ITE_CIR=y
CONFIG_IR_FINTEK=y
CONFIG_IR_NUVOTON=y
CONFIG_IR_REDRAT3=y
CONFIG_IR_STREAMZAP=y
CONFIG_IR_WINBOND_CIR=y
CONFIG_IR_IGUANA=y
CONFIG_IR_TTUSBIR=y
CONFIG_IR_IMG=y
CONFIG_IR_IMG_RAW=y
CONFIG_IR_IMG_HW=y
CONFIG_IR_IMG_NEC=y
CONFIG_IR_IMG_JVC=y
CONFIG_IR_IMG_SONY=y
CONFIG_IR_IMG_SHARP=y
CONFIG_IR_IMG_SANYO=y
CONFIG_RC_LOOPBACK=y
CONFIG_IR_GPIO_CIR=y
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
CONFIG_USB_M5602=y
CONFIG_USB_STV06XX=y
CONFIG_USB_GL860=y
CONFIG_USB_GSPCA_BENQ=y
CONFIG_USB_GSPCA_CONEX=y
CONFIG_USB_GSPCA_CPIA1=y
CONFIG_USB_GSPCA_DTCS033=y
CONFIG_USB_GSPCA_ETOMS=y
CONFIG_USB_GSPCA_FINEPIX=y
CONFIG_USB_GSPCA_JEILINJ=y
CONFIG_USB_GSPCA_JL2005BCD=y
CONFIG_USB_GSPCA_KINECT=y
CONFIG_USB_GSPCA_KONICA=y
CONFIG_USB_GSPCA_MARS=y
CONFIG_USB_GSPCA_MR97310A=y
CONFIG_USB_GSPCA_NW80X=y
CONFIG_USB_GSPCA_OV519=y
CONFIG_USB_GSPCA_OV534=y
CONFIG_USB_GSPCA_OV534_9=y
CONFIG_USB_GSPCA_PAC207=y
CONFIG_USB_GSPCA_PAC7302=y
CONFIG_USB_GSPCA_PAC7311=y
CONFIG_USB_GSPCA_SE401=y
CONFIG_USB_GSPCA_SN9C2028=y
CONFIG_USB_GSPCA_SN9C20X=y
CONFIG_USB_GSPCA_SONIXB=y
CONFIG_USB_GSPCA_SONIXJ=y
CONFIG_USB_GSPCA_SPCA500=y
CONFIG_USB_GSPCA_SPCA501=y
CONFIG_USB_GSPCA_SPCA505=y
CONFIG_USB_GSPCA_SPCA506=y
CONFIG_USB_GSPCA_SPCA508=y
CONFIG_USB_GSPCA_SPCA561=y
CONFIG_USB_GSPCA_SPCA1528=y
CONFIG_USB_GSPCA_SQ905=y
CONFIG_USB_GSPCA_SQ905C=y
CONFIG_USB_GSPCA_SQ930X=y
CONFIG_USB_GSPCA_STK014=y
CONFIG_USB_GSPCA_STK1135=y
CONFIG_USB_GSPCA_STV0680=y
CONFIG_USB_GSPCA_SUNPLUS=y
CONFIG_USB_GSPCA_T613=y
CONFIG_USB_GSPCA_TOPRO=y
CONFIG_USB_GSPCA_TV8532=y
CONFIG_USB_GSPCA_VC032X=y
CONFIG_USB_GSPCA_VICAM=y
CONFIG_USB_GSPCA_XIRLINK_CIT=y
CONFIG_USB_GSPCA_ZC3XX=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_VIDEO_CPIA2=y
CONFIG_USB_ZR364XX=y
CONFIG_USB_STKWEBCAM=y
CONFIG_USB_S2255=y
CONFIG_VIDEO_USBTV=y

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
CONFIG_VIDEO_HDPVR=y
CONFIG_VIDEO_USBVISION=y
CONFIG_VIDEO_STK1160_COMMON=y
CONFIG_VIDEO_STK1160=y

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=y
CONFIG_VIDEO_AU0828_V4L2=y
CONFIG_VIDEO_AU0828_RC=y
CONFIG_VIDEO_CX231XX=y
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_DVB=y
CONFIG_VIDEO_TM6000=y
CONFIG_VIDEO_TM6000_DVB=y

#
# Digital TV USB devices
#
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
CONFIG_DVB_USB_DIB0700=y
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_VP7045=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_GP8PSK=y
CONFIG_DVB_USB_NOVA_T_USB2=y
CONFIG_DVB_USB_TTUSB2=y
CONFIG_DVB_USB_DTT200U=y
CONFIG_DVB_USB_OPERA1=y
CONFIG_DVB_USB_AF9005=y
CONFIG_DVB_USB_AF9005_REMOTE=y
CONFIG_DVB_USB_PCTV452E=y
CONFIG_DVB_USB_DW2102=y
CONFIG_DVB_USB_CINERGY_T2=y
CONFIG_DVB_USB_DTV5100=y
CONFIG_DVB_USB_FRIIO=y
CONFIG_DVB_USB_AZ6027=y
CONFIG_DVB_USB_TECHNISAT_USB2=y
CONFIG_DVB_USB_V2=y
CONFIG_DVB_USB_AF9015=y
CONFIG_DVB_USB_AF9035=y
CONFIG_DVB_USB_ANYSEE=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_AZ6007=y
CONFIG_DVB_USB_CE6230=y
CONFIG_DVB_USB_EC168=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_LME2510=y
CONFIG_DVB_USB_MXL111SF=y
CONFIG_DVB_USB_RTL28XXU=y
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y
CONFIG_SMS_USB_DRV=y
CONFIG_DVB_B2C2_FLEXCOP_USB=y
CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=y
CONFIG_VIDEO_EM28XX_V4L2=y
CONFIG_VIDEO_EM28XX_DVB=y
CONFIG_VIDEO_EM28XX_RC=y

#
# Software defined radio USB devices
#
CONFIG_USB_MSI2500=y
CONFIG_USB_AIRSPY=y
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
CONFIG_VIDEO_MEYE=y

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_FB_IVTV=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
CONFIG_VIDEO_ZORAN_ZR36060=y
CONFIG_VIDEO_ZORAN_BUZ=y
CONFIG_VIDEO_ZORAN_DC10=y
CONFIG_VIDEO_ZORAN_LML33=y
CONFIG_VIDEO_ZORAN_LML33R10=y
CONFIG_VIDEO_ZORAN_AVS6EYES=y
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_MXB=y

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=y
CONFIG_VIDEO_CX25821=y
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_DVB=y
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=y
CONFIG_VIDEO_CX88_MPEG=y
CONFIG_VIDEO_BT848=y
CONFIG_DVB_BT8XX=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=y
CONFIG_VIDEO_SAA7164=y

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
CONFIG_DVB_BUDGET_AV=y
CONFIG_DVB_BUDGET_PATCH=y
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
CONFIG_DVB_PLUTO2=y
CONFIG_DVB_DM1105=y
CONFIG_DVB_PT1=y
CONFIG_MANTIS_CORE=y
CONFIG_DVB_MANTIS=y
CONFIG_DVB_HOPPER=y
CONFIG_DVB_NGENE=y
CONFIG_DVB_DDBRIDGE=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_VIDEO_VIA_CAMERA=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_SH_VEU=y
CONFIG_VIDEO_RENESAS_VSP1=y
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_MEM2MEM_TESTDEV=y

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=y
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=y
CONFIG_RADIO_SI470X=y
CONFIG_USB_SI470X=y
CONFIG_RADIO_SI4713=y
CONFIG_USB_SI4713=y
CONFIG_PLATFORM_SI4713=y
CONFIG_I2C_SI4713=y
CONFIG_USB_MR800=y
CONFIG_USB_DSBR=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_SHARK=y
CONFIG_RADIO_SHARK2=y
CONFIG_USB_KEENE=y
CONFIG_USB_RAREMONO=y
CONFIG_USB_MA901=y
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_RADIO_SAA7706H=y
CONFIG_RADIO_TEF6862=y
CONFIG_RADIO_WL1273=y

#
# Texas Instruments WL128x FM driver (ST based)
#
CONFIG_RADIO_WL128X=y

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=y
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#

# common driver options
#
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_CYPRESS_FIRMWARE=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_SMS_SIANO_MDTV=y
CONFIG_SMS_SIANO_RC=y
CONFIG_SMS_SIANO_DEBUGFS=y

#
# Media ancillary drivers (tuners, sensors, i2c, frontends) #
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=y

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
CONFIG_VIDEO_TEA6415C=y
CONFIG_VIDEO_TEA6420=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y

#
# Video decoders
#
CONFIG_VIDEO_BT819=y
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_VPX3220=y

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_SAA7185=y
CONFIG_VIDEO_ADV7170=y
CONFIG_VIDEO_ADV7175=y

#
# Camera sensor devices
#
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_MT9V011=y

#
# Flash devices
#

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y

#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=y

#
# Sensors used on soc_camera driver
#

#

# soc_camera sensor drivers
#
CONFIG_SOC_CAMERA_IMX074=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
CONFIG_SOC_CAMERA_MT9T031=y
CONFIG_SOC_CAMERA_MT9T112=y
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_SOC_CAMERA_OV5642=y
CONFIG_SOC_CAMERA_OV6650=y
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_SOC_CAMERA_OV9640=y
CONFIG_SOC_CAMERA_OV9740=y
CONFIG_SOC_CAMERA_RJ54N1=y
CONFIG_SOC_CAMERA_TW9910=y
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MSI001=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2063=y
CONFIG_MEDIA_TUNER_MT2266=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MAX2165=y
CONFIG_MEDIA_TUNER_TDA18218=y
CONFIG_MEDIA_TUNER_FC0011=y
CONFIG_MEDIA_TUNER_FC0012=y
CONFIG_MEDIA_TUNER_FC0013=y
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
CONFIG_MEDIA_TUNER_M88TS2022=y
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_SI2157=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_R820T=y

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
CONFIG_DVB_M88DS3103=y

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
CONFIG_DVB_SI2165=y

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=y
CONFIG_DVB_CX24123=y
CONFIG_DVB_MT312=y
CONFIG_DVB_ZL10036=y
CONFIG_DVB_ZL10039=y
CONFIG_DVB_S5H1420=y
CONFIG_DVB_STV0288=y
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8261=y
CONFIG_DVB_VES1X93=y
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
CONFIG_DVB_TDA826X=y
CONFIG_DVB_TUA6100=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_SI21XX=y
CONFIG_DVB_TS2020=y
CONFIG_DVB_DS3000=y
CONFIG_DVB_MB86A16=y
CONFIG_DVB_TDA10071=y

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=y
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
CONFIG_DVB_DRXD=y
CONFIG_DVB_L64781=y
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=y
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_AF9013=y
CONFIG_DVB_EC100=y
CONFIG_DVB_CXD2820R=y
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
CONFIG_DVB_RTL2832_SDR=y
CONFIG_DVB_SI2168=y

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_STV0297=y

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
CONFIG_DVB_NXT200X=y
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
CONFIG_DVB_AU8522_V4L=y
CONFIG_DVB_S5H1411=y

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=y
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
CONFIG_DVB_TUNER_DIB0090=y

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=y
CONFIG_DVB_LNBP21=y
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_A8293=y
CONFIG_DVB_LGS8GXX=y
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_IX2505V=y
CONFIG_DVB_M88RS2000=y
CONFIG_DVB_AF9033=y

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y

#
# Direct Rendering Manager
#
CONFIG_DRM=y
CONFIG_DRM_USB=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_PTN3460=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_UMS=y
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT=y
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=y
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=y
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_DRM_BOCHS=y

#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_DEBUG=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_FB_RADEON_DEBUG=y
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_SM501=y
CONFIG_FB_SMSCUFX=y
CONFIG_FB_UDL=y
CONFIG_FB_VIRTUAL=y
CONFIG_XEN_FBDEV_FRONTEND=y
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
CONFIG_FB_AUO_K1901=y
CONFIG_FB_HYPERV=y
CONFIG_FB_SIMPLE=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
CONFIG_LCD_AMS369FG06=y
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=y
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_PANDORA=y
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=y
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=y
CONFIG_HID_AUREAL=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CP2112=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
CONFIG_HID_ELO=y
CONFIG_HID_EZKEY=y
CONFIG_HID_HOLTEK=y
CONFIG_HOLTEK_FF=y
CONFIG_HID_GT683R=y
CONFIG_HID_HUION=y
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PENMOUNT=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PRIMAX=y
CONFIG_HID_ROCCAT=y
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_SONY_FF=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# I2C HID support
#
CONFIG_I2C_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_OTG_BLACKLIST_HUB=y
CONFIG_USB_OTG_FSM=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_FUSBH200_HCD=y
CONFIG_USB_FOTG210_HCD=y
CONFIG_USB_MAX3421_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_SL811_HCD_ISO=y
CONFIG_USB_SL811_CS=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_RENESAS_USBHS_HCD=y
CONFIG_USB_WHCI_HCD=y
CONFIG_USB_HWA_HCD=y
CONFIG_USB_HCD_BCMA=y
CONFIG_USB_HCD_SSB=y
CONFIG_USB_HCD_TEST_MODE=y
CONFIG_USB_RENESAS_USBHS=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #

#

# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_REALTEK=y
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_STORAGE_ENE_UB6250=y
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
CONFIG_USBIP_CORE=y
# CONFIG_USBIP_VHCI_HCD is not set
CONFIG_USBIP_HOST=y
CONFIG_USBIP_DEBUG=y
CONFIG_USB_MUSB_HDRC=y
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_GADGET is not set
CONFIG_USB_MUSB_DUAL_ROLE=y
CONFIG_USB_MUSB_TUSB6010=y
# CONFIG_USB_MUSB_UX500 is not set
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_HOST is not set
# CONFIG_USB_DWC3_GADGET is not set
CONFIG_USB_DWC3_DUAL_ROLE=y

#
# Platform Glue Driver Support
#
CONFIG_USB_DWC3_PCI=y

#
# Debugging features
#
CONFIG_USB_DWC3_DEBUG=y
CONFIG_USB_DWC3_VERBOSE=y
CONFIG_DWC3_HOST_USB3_LPM_ENABLE=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
CONFIG_USB_DWC2_PLATFORM=y
CONFIG_USB_DWC2_PCI=y

#
# Gadget mode requires USB Gadget support to be enabled #
CONFIG_USB_DWC2_PERIPHERAL=y CONFIG_USB_DWC2_DEBUG=y CONFIG_USB_DWC2_VERBOSE=y CONFIG_USB_DWC2_TRACK_MISSED_SOFS=y CONFIG_USB_DWC2_DEBUG_PERIODIC=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_CHIPIDEA_DEBUG=y

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=y
CONFIG_USB_SERIAL_AIRCABLE=y
CONFIG_USB_SERIAL_ARK3116=y
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
CONFIG_USB_SERIAL_EMPEG=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_VISOR=y
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
CONFIG_USB_SERIAL_EDGEPORT=y
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_F81232=y
CONFIG_USB_SERIAL_GARMIN=y
CONFIG_USB_SERIAL_IPW=y
CONFIG_USB_SERIAL_IUU=y
CONFIG_USB_SERIAL_KEYSPAN_PDA=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=y
CONFIG_USB_SERIAL_KOBIL_SCT=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_METRO=y
CONFIG_USB_SERIAL_MOS7720=y
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MXUPORT=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QCAUX=y
CONFIG_USB_SERIAL_QUALCOMM=y
CONFIG_USB_SERIAL_SPCP8X5=y
CONFIG_USB_SERIAL_SAFE=y
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
CONFIG_USB_SERIAL_TI=y
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_WWAN=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_XSENS_MT=y
CONFIG_USB_SERIAL_WISHBONE=y
CONFIG_USB_SERIAL_ZTE=y
CONFIG_USB_SERIAL_SSU100=y
CONFIG_USB_SERIAL_QT2=y
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
CONFIG_USB_LCD=y
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
CONFIG_USB_APPLEDISPLAY=y
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
CONFIG_USB_EHSET_TEST_FIXTURE=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_YUREX=y
CONFIG_USB_EZUSB_FX2=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_LINK_LAYER_TEST=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=y
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y

#
# USB Physical Layer drivers
#
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_TAHVO_USB=y
CONFIG_TAHVO_USB_HOST_BY_DEFAULT=y
CONFIG_USB_ISP1301=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_VERBOSE=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
CONFIG_USB_FOTG210_UDC=y
CONFIG_USB_GR_UDC=y
CONFIG_USB_R8A66597=y
CONFIG_USB_RENESAS_USBHS_UDC=y
CONFIG_USB_PXA27X=y
CONFIG_USB_MV_UDC=y
CONFIG_USB_MV_U3D=y
CONFIG_USB_M66592=y
CONFIG_USB_AMD5536UDC=y
CONFIG_USB_NET2272=y
CONFIG_USB_NET2272_DMA=y
CONFIG_USB_NET2280=y
CONFIG_USB_GOKU=y
CONFIG_USB_EG20T=y
CONFIG_USB_DUMMY_HCD=y
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_U_ETHER=m
CONFIG_USB_F_ECM=m
CONFIG_USB_F_EEM=m
CONFIG_USB_F_SUBSET=m
CONFIG_USB_F_RNDIS=m
# CONFIG_USB_CONFIGFS is not set
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_ETH_EEM=y
# CONFIG_USB_G_NCM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_GADGET_TARGET is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_ACM_MS is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_DBGP is not set
# CONFIG_USB_G_WEBCAM is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_CLKGATE=y

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_SDHCI_PXAV2=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_VUB300=y
CONFIG_MMC_USHC=y
CONFIG_MMC_USDHI6ROL0=y
CONFIG_MMC_REALTEK_PCI=y
CONFIG_MMC_REALTEK_USB=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_MEMSTICK_REALTEK_USB=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
CONFIG_LEDS_88PM860X=y
CONFIG_LEDS_LM3530=y
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_INTEL_SS4200=y
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_DELL_NETBOOKS=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) #
CONFIG_LEDS_BLINKM=y

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y

#

# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_QIB=y
CONFIG_INFINIBAND_QIB_DCA=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
CONFIG_INFINIBAND_CXGB3_DEBUG=y
CONFIG_INFINIBAND_CXGB4=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_MLX5_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
CONFIG_INFINIBAND_OCRDMA=y
CONFIG_INFINIBAND_USNIC=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_SRPT=y
CONFIG_INFINIBAND_ISER=y
CONFIG_INFINIBAND_ISERT=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_HCTOSYS_DEVICE="y"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_88PM80X=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
# CONFIG_RTC_DRV_MAX8925 is not set
# CONFIG_RTC_DRV_MAX8998 is not set
CONFIG_RTC_DRV_MAX8997=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12057=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF85063=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS6586X=y
# CONFIG_RTC_DRV_TPS65910 is not set
CONFIG_RTC_DRV_TPS80031=y
# CONFIG_RTC_DRV_RC5T583 is not set
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_RV3029C2=y
CONFIG_RTC_DRV_S5M=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
CONFIG_RTC_DRV_DS1305=y
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=y
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_RX4581=y
CONFIG_RTC_DRV_MCP795=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_DA9052 is not set
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_DA9063=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_M48T35=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_RTC_DRV_MSM6242=y
CONFIG_RTC_DRV_BQ4802=y
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set
# CONFIG_RTC_DRV_PCF50633 is not set
CONFIG_RTC_DRV_AB3100=y

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PCAP is not set
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_XGENE=y

#
# HID Sensor RTC drivers
#
CONFIG_RTC_DRV_HID_SENSOR_TIME=y
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y

#
# DMA Devices
#
CONFIG_INTEL_MIC_X100_DMA=y
CONFIG_INTEL_MID_DMAC=y
CONFIG_INTEL_IOATDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_DMEM_GENIRQ=y
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
CONFIG_UIO_MF624=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_VGA=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y

#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=y
CONFIG_HYPERV_UTILS=y
CONFIG_HYPERV_BALLOON=y

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SELFBALLOONING=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
CONFIG_SWIOTLB_XEN=y
CONFIG_XEN_TMEM=m
CONFIG_XEN_PCIDEV_BACKEND=y
CONFIG_XEN_SCSI_BACKEND=y
CONFIG_XEN_PRIVCMD=y
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_STAGING=y
CONFIG_ET131X=y
CONFIG_SLICOSS=y
CONFIG_PRISM2_USB=y
CONFIG_COMEDI=m
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
CONFIG_COMEDI_MISC_DRIVERS=y
CONFIG_COMEDI_BOND=m
CONFIG_COMEDI_TEST=m
CONFIG_COMEDI_PARPORT=m
CONFIG_COMEDI_SERIAL2002=m
CONFIG_COMEDI_SKEL=m
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=m
CONFIG_COMEDI_PCL724=m
CONFIG_COMEDI_PCL726=m
CONFIG_COMEDI_PCL730=m
CONFIG_COMEDI_PCL812=m
CONFIG_COMEDI_PCL816=m
CONFIG_COMEDI_PCL818=m
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=m
CONFIG_COMEDI_AMPLC_PC236_ISA=m
CONFIG_COMEDI_AMPLC_PC263_ISA=m
CONFIG_COMEDI_RTI800=m
CONFIG_COMEDI_RTI802=m
# CONFIG_COMEDI_DAC02 is not set
CONFIG_COMEDI_DAS16M1=m
CONFIG_COMEDI_DAS08_ISA=m
CONFIG_COMEDI_DAS16=m
CONFIG_COMEDI_DAS800=m
CONFIG_COMEDI_DAS1800=m
CONFIG_COMEDI_DAS6402=m
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=m
CONFIG_COMEDI_DT2814=m
CONFIG_COMEDI_DT2815=m
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=m
CONFIG_COMEDI_UNIOXX5=m
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=m
CONFIG_COMEDI_II_PCI20KC=m
CONFIG_COMEDI_C6XDIGIO=m
CONFIG_COMEDI_MPC624=m
CONFIG_COMEDI_ADQ12B=m
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=m
CONFIG_COMEDI_NI_ATMIO=m
CONFIG_COMEDI_NI_ATMIO16D=m
CONFIG_COMEDI_NI_LABPC_ISA=m
CONFIG_COMEDI_PCMAD=m
CONFIG_COMEDI_PCMDA12=m
CONFIG_COMEDI_PCMMIO=m
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=m
CONFIG_COMEDI_PCI_DRIVERS=y
CONFIG_COMEDI_8255_PCI=m
CONFIG_COMEDI_ADDI_WATCHDOG=m
CONFIG_COMEDI_ADDI_APCI_035=m
CONFIG_COMEDI_ADDI_APCI_1032=m
CONFIG_COMEDI_ADDI_APCI_1500=m
CONFIG_COMEDI_ADDI_APCI_1516=m
CONFIG_COMEDI_ADDI_APCI_1564=m
CONFIG_COMEDI_ADDI_APCI_16XX=m
CONFIG_COMEDI_ADDI_APCI_2032=m
CONFIG_COMEDI_ADDI_APCI_2200=m
CONFIG_COMEDI_ADDI_APCI_3120=m
CONFIG_COMEDI_ADDI_APCI_3501=m
CONFIG_COMEDI_ADDI_APCI_3XXX=m
CONFIG_COMEDI_ADL_PCI6208=m
CONFIG_COMEDI_ADL_PCI7X3X=m
CONFIG_COMEDI_ADL_PCI8164=m
CONFIG_COMEDI_ADL_PCI9111=m
CONFIG_COMEDI_ADL_PCI9118=m
CONFIG_COMEDI_ADV_PCI1710=m
CONFIG_COMEDI_ADV_PCI1723=m
CONFIG_COMEDI_ADV_PCI1724=m
CONFIG_COMEDI_ADV_PCI_DIO=m
CONFIG_COMEDI_AMPLC_DIO200_PCI=m
CONFIG_COMEDI_AMPLC_PC236_PCI=m
CONFIG_COMEDI_AMPLC_PC263_PCI=m
CONFIG_COMEDI_AMPLC_PCI224=m
CONFIG_COMEDI_AMPLC_PCI230=m
CONFIG_COMEDI_CONTEC_PCI_DIO=m
CONFIG_COMEDI_DAS08_PCI=m
CONFIG_COMEDI_DT3000=m
CONFIG_COMEDI_DYNA_PCI10XX=m
CONFIG_COMEDI_GSC_HPDI=m
CONFIG_COMEDI_MF6X4=m
CONFIG_COMEDI_ICP_MULTI=m
CONFIG_COMEDI_DAQBOARD2000=m
CONFIG_COMEDI_JR3_PCI=m
CONFIG_COMEDI_KE_COUNTER=m
CONFIG_COMEDI_CB_PCIDAS64=m
CONFIG_COMEDI_CB_PCIDAS=m
CONFIG_COMEDI_CB_PCIDDA=m
CONFIG_COMEDI_CB_PCIMDAS=m
CONFIG_COMEDI_CB_PCIMDDA=m
CONFIG_COMEDI_ME4000=m
CONFIG_COMEDI_ME_DAQ=m
CONFIG_COMEDI_NI_6527=m
CONFIG_COMEDI_NI_65XX=m
CONFIG_COMEDI_NI_660X=m
CONFIG_COMEDI_NI_670X=m
CONFIG_COMEDI_NI_LABPC_PCI=m
CONFIG_COMEDI_NI_PCIDIO=m
CONFIG_COMEDI_NI_PCIMIO=m
CONFIG_COMEDI_RTD520=m
CONFIG_COMEDI_S626=m
CONFIG_COMEDI_MITE=m
CONFIG_COMEDI_NI_TIOCMD=m
CONFIG_COMEDI_PCMCIA_DRIVERS=y
CONFIG_COMEDI_CB_DAS16_CS=m
CONFIG_COMEDI_DAS08_CS=m
CONFIG_COMEDI_NI_DAQ_700_CS=m
CONFIG_COMEDI_NI_DAQ_DIO24_CS=m
CONFIG_COMEDI_NI_LABPC_CS=m
CONFIG_COMEDI_NI_MIO_CS=m
CONFIG_COMEDI_QUATECH_DAQP_CS=m
CONFIG_COMEDI_USB_DRIVERS=y
CONFIG_COMEDI_DT9812=m
CONFIG_COMEDI_NI_USB6501=m
CONFIG_COMEDI_USBDUX=m
CONFIG_COMEDI_USBDUXFAST=m
CONFIG_COMEDI_USBDUXSIGMA=m
CONFIG_COMEDI_VMK80XX=m
CONFIG_COMEDI_8255=m
CONFIG_COMEDI_KCOMEDILIB=m
CONFIG_COMEDI_FC=m
CONFIG_COMEDI_AMPLC_DIO200=m
CONFIG_COMEDI_AMPLC_PC236=m
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_NI_LABPC=m
CONFIG_COMEDI_NI_LABPC_ISADMA=m
CONFIG_COMEDI_NI_TIO=m
CONFIG_RTL8192U=m
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
CONFIG_R8712U=y
CONFIG_R8188EU=y
CONFIG_88EU_AP_MODE=y
CONFIG_R8192EE=m
CONFIG_R8723AU=y
CONFIG_8723AU_AP_MODE=y
CONFIG_8723AU_BT_COEXIST=y
CONFIG_R8821AE=m
CONFIG_RTS5208=y
CONFIG_VT6655=m
CONFIG_VT6656=m

#
# IIO staging drivers
#

#
# Accelerometers
#
CONFIG_ADIS16201=y
CONFIG_ADIS16203=y
CONFIG_ADIS16204=y
CONFIG_ADIS16209=y
CONFIG_ADIS16220=y
CONFIG_ADIS16240=y
CONFIG_LIS3L02DQ=y
CONFIG_SCA3000=y

#
# Analog to digital converters
#
CONFIG_AD7606=y
CONFIG_AD7606_IFACE_PARALLEL=y
CONFIG_AD7606_IFACE_SPI=y
CONFIG_AD7780=y
CONFIG_AD7816=y
CONFIG_AD7192=y
CONFIG_AD7280=y

#
# Analog digital bi-direction converters
#
CONFIG_ADT7316=y
CONFIG_ADT7316_SPI=y
CONFIG_ADT7316_I2C=y

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7152=y
CONFIG_AD7746=y

#
# Direct Digital Synthesis
#
CONFIG_AD9832=y
CONFIG_AD9834=y

#
# Digital gyroscope sensors
#
CONFIG_ADIS16060=y

#
# Network Analyzer, Impedance Converters
#
CONFIG_AD5933=y

#
# Light sensors
#
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_TSL2583=y
CONFIG_TSL2x7x=y

#
# Magnetometer sensors
#
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
CONFIG_SENSORS_HMC5843_SPI=y

#
# Active energy metering IC
#
CONFIG_ADE7753=y
CONFIG_ADE7754=y
CONFIG_ADE7758=y
CONFIG_ADE7759=y
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
CONFIG_ADE7854_SPI=y

#
# Resolver to digital converters
#
CONFIG_AD2S90=y
CONFIG_AD2S1200=y
CONFIG_AD2S1210=y

#
# Triggers - standalone
#
CONFIG_IIO_PERIODIC_RTC_TRIGGER=y
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
CONFIG_FB_XGI=y
CONFIG_BCM_WIMAX=y
CONFIG_FT1000=y
CONFIG_FT1000_USB=y
CONFIG_FT1000_PCMCIA=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=y
CONFIG_SPEAKUP_SYNTH_APOLLO=y
CONFIG_SPEAKUP_SYNTH_AUDPTR=y
CONFIG_SPEAKUP_SYNTH_BNS=y
CONFIG_SPEAKUP_SYNTH_DECTLK=y
CONFIG_SPEAKUP_SYNTH_DECEXT=y
CONFIG_SPEAKUP_SYNTH_LTLK=y
CONFIG_SPEAKUP_SYNTH_SOFT=y
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
CONFIG_SPEAKUP_SYNTH_TXPRT=y
CONFIG_SPEAKUP_SYNTH_DUMMY=y
CONFIG_TOUCHSCREEN_CLEARPAD_TM1217=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_STAGING_MEDIA=y
CONFIG_DVB_AS102=y
CONFIG_I2C_BCM2048=y
CONFIG_DVB_CXD2099=y
CONFIG_VIDEO_DT3155=y
CONFIG_DT3155_CCIR=y
CONFIG_DT3155_STREAMING=y
CONFIG_VIDEO_V4L2_INT_DEVICE=y
CONFIG_VIDEO_TCM825X=y

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=y
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO=y
# CONFIG_ANDROID_LOW_MEMORY_KILLER is not set
CONFIG_ANDROID_INTF_ALARM_DEV=y
CONFIG_SYNC=y
CONFIG_SW_SYNC=y
CONFIG_SW_SYNC_USER=y
# CONFIG_ION is not set
CONFIG_USB_WPAN_HCD=y
CONFIG_WIMAX_GDM72XX=y
CONFIG_WIMAX_GDM72XX_QOS=y
CONFIG_WIMAX_GDM72XX_K_MODE=y
CONFIG_WIMAX_GDM72XX_WIMAX2=y
CONFIG_WIMAX_GDM72XX_USB=y
# CONFIG_WIMAX_GDM72XX_SDIO is not set
CONFIG_WIMAX_GDM72XX_USB_PM=y
CONFIG_LTE_GDM724X=m
CONFIG_FIREWIRE_SERIAL=y
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_MTD_SPINAND_MT29F=y
CONFIG_MTD_SPINAND_ONDIEECC=y
CONFIG_LUSTRE_FS=m
CONFIG_LUSTRE_OBD_MAX_IOCTL_BUFFER=8192
CONFIG_LUSTRE_DEBUG_EXPENSIVE_CHECK=y
CONFIG_LUSTRE_LLITE_LLOOP=m
CONFIG_LNET=m
CONFIG_LNET_MAX_PAYLOAD=1048576
CONFIG_LNET_SELFTEST=m
CONFIG_LNET_XPRT_IB=m
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_PCIE=y
CONFIG_DGNC=y
CONFIG_DGAP=y
CONFIG_GS_FPGABOOT=y
CONFIG_CRYPTO_SKEIN=y
CONFIG_CRYPTO_THREEFISH=y
CONFIG_UNISYSSPAR=y
CONFIG_UNISYS_VISORUTIL=y
CONFIG_UNISYS_VISORCHANNEL=y
CONFIG_UNISYS_VISORCHIPSET=y
CONFIG_UNISYS_CHANNELSTUB=y
CONFIG_UNISYS_UISLIB=y
CONFIG_UNISYS_VIRTPCI=y
CONFIG_UNISYS_VIRTHBA=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=y
CONFIG_ACERHDF=y
CONFIG_ALIENWARE_WMI=y
CONFIG_ASUS_LAPTOP=y
CONFIG_DELL_LAPTOP=y
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_AIO=y
CONFIG_DELL_SMO8800=y
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
CONFIG_FUJITSU_TABLET=y
CONFIG_AMILO_RFKILL=y
CONFIG_HP_ACCEL=y
CONFIG_HP_WIRELESS=y
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_EEEPC_LAPTOP=y
CONFIG_ASUS_WMI=y
CONFIG_ASUS_NB_WMI=y
CONFIG_EEEPC_WMI=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
CONFIG_TOPSTAR_LAPTOP=y
CONFIG_ACPI_TOSHIBA=y
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_TOSHIBA_HAPS=y
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=y
CONFIG_IBM_RTL=y
CONFIG_SAMSUNG_LAPTOP=y
CONFIG_MXM_WMI=y
CONFIG_INTEL_OAKTRAIL=y
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_PVPANIC=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_LAPTOP=y
CONFIG_CHROMEOS_PSTORE=y

#
# SOC (System On Chip) specific Drivers
#
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_MAX77686=y
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_TWL6040=y
CONFIG_COMMON_CLK_PALMAS=y

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_MAILBOX=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_AMD_IOMMU_V2=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y

#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y

#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_GPIO=y
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_SM5502=y
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2

1,152 lines not shown · raw message

Part of this message is not shown here. View the raw message.

#16 lore raw
In reply to Mel Gorman
Quoted 5 lines · Mel Gorman

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

I did see ptl corruption couple days ago:

	https://lkml.org/lkml/2014/9/4/599

Could this be related?

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#17 lore raw
Quoted 7 lines · Sasha Levin
Quoted 5 lines · Mel Gorman

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

Quoted 6 lines

I did see ptl corruption couple days ago:

	https://lkml.org/lkml/2014/9/4/599

Could this be related?

Possibly although the likely explanation then would be that there is just general corruption coming from somewhere. Even using your config and applying a patch to make linux-next boot (already in Tejun's tree) I was unable to reproduce the problem after running for several hours. I had to run trinity on tmpfs as ext4 and xfs blew up almost immediately so I have a few questions.

1. What filesystem are you using?

2. What compiler in case it's an experimental compiler? I ask because I think I saw a patch from you adding support so that the kernel would build with gcc 5

3. Does your hardware support TSX or anything similarly funky that would potentially affect locking?

4. How many sockets are on your test machine in case reproducing it depends in a machine large enough to open a timing race?

As I'm drawing a blank on what would trigger the bug I'm hoping I can reproduce this locally and experiement a bit.

Thanks.

Signature · 8 lines
Mel Gorman
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to [email protected].  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
#18 lore raw
Quoted 15 lines · Mel Gorman
Quoted 7 lines · Sasha Levin
Quoted 5 lines · Mel Gorman

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

Quoted 6 lines

I did see ptl corruption couple days ago:

	https://lkml.org/lkml/2014/9/4/599

Could this be related?

Quoted 6 lines

Possibly although the likely explanation then would be that there is just general corruption coming from somewhere. Even using your config and applying a patch to make linux-next boot (already in Tejun's tree) I was unable to reproduce the problem after running for several hours. I had to run trinity on tmpfs as ext4 and xfs blew up almost immediately so I have a few questions.

I agree it could be a case of random corruption somewhere else, it's just that the amount of times this exact issue reproduced

Quoted 1 line

1. What filesystem are you using?

virtio-9p. I'm willing to try something more "common" if you feel this could be related, but I haven't seen any issues coming out of 9p in a while now.

Quoted 3 lines

2. What compiler in case it's an experimental compiler? I ask because I think I saw a patch from you adding support so that the kernel would build with gcc 5

Right, I've been testing with gcc 5 as well as Debian's gcc 4.7.2, it reproduces with both compilers.

Quoted 2 lines

3. Does your hardware support TSX or anything similarly funky that would potentially affect locking?

Not that I know of, here are the cpu flags for reference:

fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 x2apic popcnt lahf_lm ida epb dtherm tpr_shadow vnmi flexpriority ept vpid

Quoted 2 lines

4. How many sockets are on your test machine in case reproducing it depends in a machine large enough to open a timing race?

128 sockets.

Quoted 2 lines

As I'm drawing a blank on what would trigger the bug I'm hoping I can reproduce this locally and experiement a bit.

I was thinking about sneaking in something like the following (untested) patch to see if it's really memory corruption that is wiping out stuff:

arch/x86/include/asm/pgtable_types.h +4 -1
index 0f9724c..0205655 100644
@@ -25,6 +25,7 @@
 #define _PAGE_BIT_SPLITTING    _PAGE_BIT_SOFTW2 /* only valid on a PSE pmd */
 #define _PAGE_BIT_IOMAP                _PAGE_BIT_SOFTW2 /* flag used to indicate IO mapping */
 #define _PAGE_BIT_HIDDEN       _PAGE_BIT_SOFTW3 /* hidden by kmemcheck */
+#define _PAGE_BIT_SANITY       _PAGE_BIT_SOFTW3 /* Memory corruption canary */
 #define _PAGE_BIT_SOFT_DIRTY   _PAGE_BIT_SOFTW3 /* software dirty tracking */
 #define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
 
@@ -66,6 +67,8 @@
 #define _PAGE_HIDDEN   (_AT(pteval_t, 0))
 #endif
 
+#define _PAGE_SANITY   (_AT(pteval_t, 1) << _PAGE_BIT_SANITY)
+
 /*
  * The same hidden bit is used by kmemcheck, but since kmemcheck
  * works on kernel pages while soft-dirty engine on user space,
@@ -312,7 +315,7 @@ static inline pmdval_t pmd_flags(pmd_t pmd)
 
 static inline pte_t native_make_pte(pteval_t val)
 {
-       return (pte_t) { .pte = val };
+       return (pte_t) { .pte = val | _PAGE_SANITY };
 }
 
 static inline pteval_t native_pte_val(pte_t pte)
include/asm-generic/pgtable.h +2 -0
index ffea570..bc897a1 100644
@@ -720,6 +720,8 @@ static inline pmd_t pmd_mknonnuma(pmd_t pmd)
 static inline pte_t pte_mknuma(pte_t pte)
 {
        pteval_t val = pte_val(pte);
+
+       VM_BUG_ON(!(val & _PAGE_SANITY));
 
        VM_BUG_ON(!(val & _PAGE_PRESENT));
 

Does it make sense at all?

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#19 lore raw
Quoted 23 lines · Sasha Levin
Quoted 15 lines · Mel Gorman
Quoted 7 lines · Sasha Levin
Quoted 5 lines · Mel Gorman

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

Quoted 6 lines

I did see ptl corruption couple days ago:

	https://lkml.org/lkml/2014/9/4/599

Could this be related?

Quoted 6 lines

Possibly although the likely explanation then would be that there is just general corruption coming from somewhere. Even using your config and applying a patch to make linux-next boot (already in Tejun's tree) I was unable to reproduce the problem after running for several hours. I had to run trinity on tmpfs as ext4 and xfs blew up almost immediately so I have a few questions.

Quoted 2 lines

I agree it could be a case of random corruption somewhere else, it's just that the amount of times this exact issue reproduced

Yes, I doubt it's random corruption; but I've been no more successful than Mel in working it out (I share responsibility for that VM_BUG_ON).

Sasha, you say you're getting plenty of these now, but I've only seen the dump for one of them, on Aug26: please post a few more dumps, so that we can look for commonality.

And please attach a disassembly of change_protection_range() (noting which of the dumps it corresponds to, in case it has changed around):
"Code" just shows a cluster of ud2s for the unlikely bugs at end of the function, we cannot tell at all what should be in the registers by then.

I've been rather assuming that the 9d340902 seen in many of the registers in that Aug26 dump is the pte val in question: that's SOFT_DIRTY|PROTNONE|RW.

I think RW on PROTNONE is unusual but not impossible (migration entry replacement racing with mprotect setting PROT_NONE, after it's updated vm_page_prot, before it's reached the page table). But exciting though that line of thought is, I cannot actually bring it to a pte_mknuma bug, or any bug at all.

Mel, no way can it be the cause of this bug - unless Sasha's later traces actually show a different stack - but I don't see the call to change_prot_numa() from queue_pages_range() sharing the same avoidance of PROT_NONE that task_numa_work() has (though it does have an outdated comment about PROT_NONE which should be removed). So I think that site probably does need PROT_NONE checking added.

Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#20 lore raw
Quoted 27 lines · Hugh Dickins
Quoted 23 lines · Sasha Levin
Quoted 15 lines · Mel Gorman
Quoted 7 lines · Sasha Levin
Quoted 5 lines · Mel Gorman

A worse possibility is that somehow the lock is getting corrupted but that's also a tough sell considering that the locks should be allocated from a dedicated cache. I guess I could try breaking that to allocate one page per lock so DEBUG_PAGEALLOC triggers but I'm not very optimistic.

Quoted 6 lines

I did see ptl corruption couple days ago:

	https://lkml.org/lkml/2014/9/4/599

Could this be related?

Quoted 6 lines

Possibly although the likely explanation then would be that there is just general corruption coming from somewhere. Even using your config and applying a patch to make linux-next boot (already in Tejun's tree) I was unable to reproduce the problem after running for several hours. I had to run trinity on tmpfs as ext4 and xfs blew up almost immediately so I have a few questions.

Quoted 2 lines

I agree it could be a case of random corruption somewhere else, it's just that the amount of times this exact issue reproduced

Quoted 7 lines

Yes, I doubt it's random corruption; but I've been no more successful than Mel in working it out (I share responsibility for that VM_BUG_ON).

Sasha, you say you're getting plenty of these now, but I've only seen the dump for one of them, on Aug26: please post a few more dumps, so that we can look for commonality.

It's also worth knowing that this is a test running in KVM and fake NUMA. The hint was that the filesystem used was virtio-9p. I haven't formulated a theory on how KVM could cause any damage here but it's interesting.

Quoted 5 lines

And please attach a disassembly of change_protection_range() (noting which of the dumps it corresponds to, in case it has changed around):
"Code" just shows a cluster of ud2s for the unlikely bugs at end of the function, we cannot tell at all what should be in the registers by then.

Quoted 7 lines

I've been rather assuming that the 9d340902 seen in many of the registers in that Aug26 dump is the pte val in question: that's SOFT_DIRTY|PROTNONE|RW.

I think RW on PROTNONE is unusual but not impossible (migration entry replacement racing with mprotect setting PROT_NONE, after it's updated vm_page_prot, before it's reached the page table).

At the risk of sounding thick, I need to spell this out because I'm having trouble seeing exactly what race you are thinking of.

Migration entry replacement is protected against parallel NUMA hinting updates by the page table lock (either PMD or PTE level). It's taken by remove_migration_pte on one side and lock_pte_protection on the other.

For the mprotect case racing again migration, migration entries are not present so change_pte_range() should ignore it. On migration completion the VMA flags determine the permissions of the new PTE. Parallel faults wait on the migration entry and see the correct value afterwards.

When creating migration entries, try_to_unmap calls page_check_address which takes the PTL before doing anything. On the mprotect side, lock_pte_protection will block before seeing PROTNONE.

I think the race you are thinking of is a migration entry created for write, parallel mprotect(PROTNONE) and migration completion. The migration entry was created for write but remove_migration_pte does not double check the VMA protections and mmap_sem is not taken for write across a full migration to protect against changes to vm_page_prot. However, change_pte_range checks for migration entries marked for write under the PTL and marks them read if one is encountered. The consequence is that we potentially take a spurious fault to mark the PTE write again after migration completes but I can't see how that causes a problem as such.

I'm missing some part of your reasoning that leads to the RW|PROTNONE :(

Quoted 4 lines

But exciting though
that line of thought is, I cannot actually bring it to a pte_mknuma bug, or any bug at all.

On x86, PROTNONE|RW translates as GLOBAL|RW which would be unexpected. It wouldn't cause this bug but it's sufficiently suspicious to be worth correcting. In case this is the race you're thinking of, the patch is below. Unfortunately, I cannot see how it would affect this problem but worth giving a whirl anyway.

Quoted 7 lines

Mel, no way can it be the cause of this bug - unless Sasha's later traces actually show a different stack - but I don't see the call to change_prot_numa() from queue_pages_range() sharing the same avoidance of PROT_NONE that task_numa_work() has (though it does have an outdated comment about PROT_NONE which should be removed). So I think that site probably does need PROT_NONE checking added.

That site should have checked PROT_NONE but it can't be the same bug that trinity is seeing. Minimally trinity is unaware of MPOL_MF_LAZY according to git grep of the trinity source.

Worth adding this to the debugging mix? It should warn if it encounters the problem but avoid adding the problematic RW bit.

---8<---
migrate: debug patch to try identify race between migration completion and mprotect

A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed but mprotect itself will mark write-migration-entries as read to avoid problems. It means we potentially take a spurious fault to mark these ptes write again but otherwise it's harmless. Still, one dump indicates that this situation can actually happen so this debugging patch spits out a warning if the situation occurs and hopefully the resulting warning will contain a clue as to how exactly it happens

Not-signed-off

---
 mm/migrate.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
mm/migrate.c +10 -2
index 09d489c..631725c 100644
@@ -146,8 +146,16 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
 	pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
 	if (pte_swp_soft_dirty(*ptep))
 		pte = pte_mksoft_dirty(pte);
-	if (is_write_migration_entry(entry))
-		pte = pte_mkwrite(pte);
+	if (is_write_migration_entry(entry)) {
+		/*
+		 * This WARN_ON_ONCE is temporary for the purposes of seeing if
+		 * it's a case encountered by trinity in Sasha's testing
+		 */
+		if (!(vma->vm_flags & (VM_WRITE)))
+			WARN_ON_ONCE(1);
+		else
+			pte = pte_mkwrite(pte);
+	}
 #ifdef CONFIG_HUGETLB_PAGE
 	if (PageHuge(new)) {
 		pte = pte_mkhuge(pte);

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#21 lore raw

Trinity and mbind flags (WAS: Re: mm: BUG in unmap_page_range)

Quoted 3 lines · Mel Gorman

That site should have checked PROT_NONE but it can't be the same bug that trinity is seeing. Minimally trinity is unaware of MPOL_MF_LAZY according to git grep of the trinity source.

Actually, if I'm reading it correctly I think that Trinity handles mbind() calls wrong. It passes the wrong values for mode flags and actual flags.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#22 lore raw

Re: Trinity and mbind flags (WAS: Re: mm: BUG in unmap_page_range)

Quoted 7 lines · Sasha Levin
Quoted 3 lines · Mel Gorman

That site should have checked PROT_NONE but it can't be the same bug that trinity is seeing. Minimally trinity is unaware of MPOL_MF_LAZY according to git grep of the trinity source.

Actually, if I'm reading it correctly I think that Trinity handles mbind() calls wrong. It passes the wrong values for mode flags and actual flags.

Ugh, I think you're right. I misinterpreted the man page that mentions that flags like MPOL_F_STATIC_NODES/RELATIVE_NODES are OR'd with the mode, and instead dumped those flags into .. the flags field.

So the 'flags' argument it generates is crap, because I didn't add any of the actual correct values.

I'll fix it up, though if it's currently finding bugs, you might want to keep the current syscalls/mbind.c for now.

Dave

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#23 lore raw
In reply to Mel Gorman
Quoted 30 lines · Mel Gorman

migrate: debug patch to try identify race between migration completion and mprotect

A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed but mprotect itself will mark write-migration-entries as read to avoid problems. It means we potentially take a spurious fault to mark these ptes write again but otherwise it's harmless. Still, one dump indicates that this situation can actually happen so this debugging patch spits out a warning if the situation occurs and hopefully the resulting warning will contain a clue as to how exactly it happens

Not-signed-off

---
 mm/migrate.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
mm/migrate.c +3 -2
index 09d489c..631725c 100644
@@ -146,8 +146,16 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
 	pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
 	if (pte_swp_soft_dirty(*ptep))
 		pte = pte_mksoft_dirty(pte);
-	if (is_write_migration_entry(entry))
-		pte = pte_mkwrite(pte);
+	if (is_write_migration_entry(entry)) {
+		/*
+		 * This WARN_ON_ONCE is temporary for the purposes of seeing if

mm/migrate.c static int remove_migration_pte(struct page *new, struct vm_area_struct *vma, · line 161

Quoted 10 lines
mm/migrate.c +7 -0
+		 * it's a case encountered by trinity in Sasha's testing
+		 */
+		if (!(vma->vm_flags & (VM_WRITE)))
+			WARN_ON_ONCE(1);
+		else
+			pte = pte_mkwrite(pte);
+	}
 #ifdef CONFIG_HUGETLB_PAGE
 	if (PageHuge(new)) {
 		pte = pte_mkhuge(pte);

I seem to have hit this warning:

[ 4782.617806] WARNING: CPU: 10 PID: 21180 at mm/migrate.c:155 remove_migration_pte+0x3f7/0x420()
[ 4782.619315] Modules linked in:
[ 4782.622189]
[ 4782.622501] CPU: 10 PID: 21180 Comm: trinity-main Tainted: G        W      3.17.0-rc4-next-20140910-sasha-00032-g6825fb5-dirty #1137
[ 4782.624344]  0000000000000009 ffff8800193eb770 ffffffffa04c742a 0000000000000000
[ 4782.627801]  ffff8800193eb7a8 ffffffff9d16e55d 00007f2458d89000 ffff880120959600
[ 4782.629283]  ffff88012b02c000 ffffea002abeab00 ffff88063118da90 ffff8800193eb7b8
[ 4782.631353] Call Trace:
[ 4782.633789]  [<ffffffffa04c742a>] dump_stack+0x4e/0x7a
[ 4782.634314]  [<ffffffff9d16e55d>] warn_slowpath_common+0x7d/0xa0
[ 4782.634877]  [<ffffffff9d16e63a>] warn_slowpath_null+0x1a/0x20
[ 4782.635430]  [<ffffffff9d315487>] remove_migration_pte+0x3f7/0x420
[ 4782.636042]  [<ffffffff9d2e99cf>] rmap_walk+0xef/0x380
[ 4782.636544]  [<ffffffff9d3147f1>] remove_migration_ptes+0x41/0x50
[ 4782.637130]  [<ffffffff9d315090>] ? __migration_entry_wait.isra.24+0x160/0x160
[ 4782.639928]  [<ffffffff9d3154b0>] ? remove_migration_pte+0x420/0x420
[ 4782.640616]  [<ffffffff9d31671b>] move_to_new_page+0x16b/0x230
[ 4782.641251]  [<ffffffff9d2e9e8c>] ? try_to_unmap+0x6c/0xf0
[ 4782.643950]  [<ffffffff9d2e88a0>] ? try_to_unmap_nonlinear+0x5c0/0x5c0
[ 4782.644690]  [<ffffffff9d2e70a0>] ? invalid_migration_vma+0x30/0x30
[ 4782.645273]  [<ffffffff9d2e82e0>] ? page_remove_rmap+0x320/0x320
[ 4782.646072]  [<ffffffff9d31717c>] migrate_pages+0x85c/0x930
[ 4782.646701]  [<ffffffff9d2d0e20>] ? isolate_freepages_block+0x410/0x410
[ 4782.647407]  [<ffffffff9d2cfa60>] ? arch_local_save_flags+0x30/0x30
[ 4782.648114]  [<ffffffff9d2d1803>] compact_zone+0x4d3/0x8a0
[ 4782.650157]  [<ffffffff9d2d1c2f>] compact_zone_order+0x5f/0xa0
[ 4782.651014]  [<ffffffff9d2d1f87>] try_to_compact_pages+0x127/0x2f0
[ 4782.651656]  [<ffffffff9d2b0c98>] __alloc_pages_direct_compact+0x68/0x200
[ 4782.652313]  [<ffffffff9d2b17ca>] __alloc_pages_nodemask+0x99a/0xd90
[ 4782.652916]  [<ffffffff9d300a1c>] alloc_pages_vma+0x13c/0x270
[ 4782.653618]  [<ffffffff9d31d914>] ? do_huge_pmd_wp_page+0x494/0xc90
[ 4782.654487]  [<ffffffff9d31d914>] do_huge_pmd_wp_page+0x494/0xc90
[ 4782.656045]  [<ffffffff9d320d20>] ? __mem_cgroup_count_vm_event+0xd0/0x240
[ 4782.657089]  [<ffffffff9d2dcb7d>] handle_mm_fault+0x8bd/0xc50
[ 4782.660931]  [<ffffffff9d1d26e6>] ? __lock_is_held+0x56/0x80
[ 4782.662695]  [<ffffffff9d0c7bc7>] __do_page_fault+0x1b7/0x660
[ 4782.663259]  [<ffffffff9d1cdc5e>] ? put_lock_stats.isra.13+0xe/0x30
[ 4782.663851]  [<ffffffff9d1abf41>] ? vtime_account_user+0x91/0xa0
[ 4782.664419]  [<ffffffff9d2a2c35>] ? context_tracking_user_exit+0xb5/0x1b0
[ 4782.665119]  [<ffffffff9db6e103>] ? __this_cpu_preempt_check+0x13/0x20
[ 4782.665969]  [<ffffffff9d1ce2e2>] ? trace_hardirqs_off_caller+0xe2/0x1b0
[ 4782.666634]  [<ffffffff9d0c8141>] trace_do_page_fault+0x51/0x2b0
[ 4782.667257]  [<ffffffff9d0bee83>] do_async_page_fault+0x63/0xd0
[ 4782.667871]  [<ffffffffa0511018>] async_page_fault+0x28/0x30

Although it wasn't followed by anything else, and I've seen the original issue getting triggered without this WARN showing up, so it seems like a different, unrelated issue?

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#24 lore raw
In reply to Mel Gorman
Quoted 5 lines · Mel Gorman
Quoted 4 lines · Hugh Dickins

I've been rather assuming that the 9d340902 seen in many of the registers in that Aug26 dump is the pte val in question: that's SOFT_DIRTY|PROTNONE|RW.

The 900s in the latest dumps imply that that 902 was not important. (If any of them are in fact the pte val.)

Quoted 21 lines
Quoted 4 lines

I think RW on PROTNONE is unusual but not impossible (migration entry replacement racing with mprotect setting PROT_NONE, after it's updated vm_page_prot, before it's reached the page table).

At the risk of sounding thick, I need to spell this out because I'm having trouble seeing exactly what race you are thinking of.

Migration entry replacement is protected against parallel NUMA hinting updates by the page table lock (either PMD or PTE level). It's taken by remove_migration_pte on one side and lock_pte_protection on the other.

For the mprotect case racing again migration, migration entries are not present so change_pte_range() should ignore it. On migration completion the VMA flags determine the permissions of the new PTE. Parallel faults wait on the migration entry and see the correct value afterwards.

When creating migration entries, try_to_unmap calls page_check_address which takes the PTL before doing anything. On the mprotect side, lock_pte_protection will block before seeing PROTNONE.

Quoted 5 lines

I think the race you are thinking of is a migration entry created for write, parallel mprotect(PROTNONE) and migration completion. The migration entry was created for write but remove_migration_pte does not double check the VMA protections and mmap_sem is not taken for write across a full migration to protect against changes to vm_page_prot.

Yes, the "if (is_write_migration_entry(entry)) pte = pte_mkwrite(pte);" arguably should take the latest value of vma->vm_page_prot into account.

Quoted 5 lines

However, change_pte_range checks
for migration entries marked for write under the PTL and marks them read if one is encountered. The consequence is that we potentially take a spurious fault to mark the PTE write again after migration completes but I can't see how that causes a problem as such.

Yes, once mprotect's page table walk reaches that pte, it updates it correctly along with all the others nearby (which were not migrated), removing the temporary oddity.

Quoted 2 lines

I'm missing some part of your reasoning that leads to the RW|PROTNONE :(

You don't appear to be missing it at all, you are seeing the possibility of an RW|PROTNONE yourself, and how it gets "corrected" afterwards ("corrected" in quotes because without the present bit, it's not an error).

Quoted 5 lines
Quoted 5 lines

But exciting though
that line of thought is, I cannot actually bring it to a pte_mknuma bug, or any bug at all.

And I wasn't saying that it led to this bug, just that it was an oddity worth thinking about, and worth mentioning to you, in case you could work out a way it might lead to the bug, when I had failed to do so.

But we now (almost) know that 902 is irrelevant to this bug anyway.

Quoted 2 lines

On x86, PROTNONE|RW translates as GLOBAL|RW which would be unexpected. It

GLOBAL once PRESENT is set, but PROTNONE so long as it is not.

Quoted 13 lines

wouldn't cause this bug but it's sufficiently suspicious to be worth correcting. In case this is the race you're thinking of, the patch is below. Unfortunately, I cannot see how it would affect this problem but worth giving a whirl anyway.

Quoted 7 lines

Mel, no way can it be the cause of this bug - unless Sasha's later traces actually show a different stack - but I don't see the call to change_prot_numa() from queue_pages_range() sharing the same avoidance of PROT_NONE that task_numa_work() has (though it does have an outdated comment about PROT_NONE which should be removed). So I think that site probably does need PROT_NONE checking added.

Quoted 3 lines

That site should have checked PROT_NONE but it can't be the same bug that trinity is seeing. Minimally trinity is unaware of MPOL_MF_LAZY according to git grep of the trinity source.

Yes, queue_pages_range() is not implicated in any of Sasha's traces. Something to fix, but not relevant to this bug.

Quoted 36 lines

Worth adding this to the debugging mix? It should warn if it encounters the problem but avoid adding the problematic RW bit.

---8<---
migrate: debug patch to try identify race between migration completion and mprotect

A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed but mprotect itself will mark write-migration-entries as read to avoid problems. It means we potentially take a spurious fault to mark these ptes write again but otherwise it's harmless. Still, one dump indicates that this situation can actually happen so this debugging patch spits out a warning if the situation occurs and hopefully the resulting warning will contain a clue as to how exactly it happens

Not-signed-off

---
 mm/migrate.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
mm/migrate.c +3 -2
index 09d489c..631725c 100644
@@ -146,8 +146,16 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
 	pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
 	if (pte_swp_soft_dirty(*ptep))
 		pte = pte_mksoft_dirty(pte);
-	if (is_write_migration_entry(entry))
-		pte = pte_mkwrite(pte);
+	if (is_write_migration_entry(entry)) {
+		/*
+		 * This WARN_ON_ONCE is temporary for the purposes of seeing if

mm/migrate.c static int remove_migration_pte(struct page *new, struct vm_area_struct *vma, · line 161

Quoted 10 lines
mm/migrate.c +7 -0
+		 * it's a case encountered by trinity in Sasha's testing
+		 */
+		if (!(vma->vm_flags & (VM_WRITE)))
+			WARN_ON_ONCE(1);
+		else
+			pte = pte_mkwrite(pte);
+	}
 #ifdef CONFIG_HUGETLB_PAGE
 	if (PageHuge(new)) {
 		pte = pte_mkhuge(pte);

Right, and Sasha reports that that can fire, but he sees the bug with this patch in and without that firing.

Consider 902 of no interest, it was just something worth mentioning before we got more info.

Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#25 lore raw
Quoted 35 lines · Hugh Dickins
Quoted 35 lines

migrate: debug patch to try identify race between migration completion and mprotect

Quoted 34 lines

A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed but mprotect itself will mark write-migration-entries as read to avoid problems. It means we potentially take a spurious fault to mark these ptes write again but otherwise it's harmless. Still, one dump indicates that this situation can actually happen so this debugging patch spits out a warning if the situation occurs and hopefully the resulting warning will contain a clue as to how exactly it happens

Not-signed-off

---
 mm/migrate.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
mm/migrate.c +8 -2
index 09d489c..631725c 100644
@@ -146,8 +146,16 @@ static int remove_migration_pte(struct page *new, struct vm_area_struct *vma,
 	pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
 	if (pte_swp_soft_dirty(*ptep))
 		pte = pte_mksoft_dirty(pte);
-	if (is_write_migration_entry(entry))
-		pte = pte_mkwrite(pte);
+	if (is_write_migration_entry(entry)) {
+		/*
+		 * This WARN_ON_ONCE is temporary for the purposes of seeing if
+		 * it's a case encountered by trinity in Sasha's testing
+		 */
+		if (!(vma->vm_flags & (VM_WRITE)))
+			WARN_ON_ONCE(1);
+		else
Quoted 8 lines
Quoted 6 lines

mm/migrate.c static int remove_migration_pte(struct page *new, struct vm_area_struct *vma, · line 161

Quoted 6 lines
mm/migrate.c +2 -0
+			pte = pte_mkwrite(pte);
+	}
 #ifdef CONFIG_HUGETLB_PAGE
 	if (PageHuge(new)) {
 		pte = pte_mkhuge(pte);

Right, and Sasha reports that that can fire, but he sees the bug with this patch in and without that firing.

I've changed that WARN_ON_ONCE() to a VM_BUG_ON_VMA() to get some useful VMA information out, and got the following:

[ 4018.870776] vma ffff8801a0f1e800 start 00007f3fd0ca7000 end 00007f3fd16a7000
[ 4018.870776] next ffff8804e1b89800 prev ffff88008cd9a000 mm ffff88054b17d000
[ 4018.870776] prot 120 anon_vma ffff880bc858a200 vm_ops           (null)
[ 4018.870776] pgoff 41bc8 file           (null) private_data           (null)
[ 4018.879731] flags: 0x8100070(mayread|maywrite|mayexec|account)
[ 4018.881324] ------------[ cut here ]------------
[ 4018.882612] kernel BUG at mm/migrate.c:155!
[ 4018.883649] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 4018.889647] Dumping ftrace buffer:
[ 4018.890323]    (ftrace buffer empty)
[ 4018.890323] Modules linked in:
[ 4018.890323] CPU: 4 PID: 9966 Comm: trinity-main Tainted: G        W      3.17.0-rc4-next-20140910-sasha-00042-ga4bad9b-dirty #1140
[ 4018.890323] task: ffff880695b83000 ti: ffff880560c44000 task.ti: ffff880560c44000
[ 4018.890323] RIP: 0010:[<ffffffff9b2fd4c1>]  [<ffffffff9b2fd4c1>] remove_migration_pte+0x3e1/0x3f0
[ 4018.890323] RSP: 0000:ffff880560c477c8  EFLAGS: 00010292
[ 4018.890323] RAX: 0000000000000001 RBX: 00007f3fd129b000 RCX: 0000000000000000
[ 4018.890323] RDX: 0000000000000001 RSI: ffffffff9e4ba395 RDI: 0000000000000001
[ 4018.890323] RBP: ffff880560c47800 R08: 0000000000000001 R09: 0000000000000001
[ 4018.890323] R10: 0000000000045401 R11: 0000000000000001 R12: ffff8801a0f1e800
[ 4018.890323] R13: ffff88054b17d000 R14: ffffea000478eb40 R15: ffff880122bcf070
[ 4018.890323] FS:  00007f3fd55bb700(0000) GS:ffff8803d6a00000(0000) knlGS:0000000000000000
[ 4018.890323] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 4018.890323] CR2: 0000000000fcbca8 CR3: 0000000561bab000 CR4: 00000000000006a0
[ 4018.890323] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4018.890323] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 4018.890323] Stack:
[ 4018.890323]  ffffea00046ed980 ffff88011079c4d8 ffffea000478eb40 ffff880560c47858
[ 4018.890323]  ffff88019fde0330 00000000000421bc ffff8801a0f1e800 ffff880560c47848
[ 4018.890323]  ffffffff9b2d1b0f ffff880bc858a200 ffff880560c47850 ffffea000478eb40
[ 4018.890323] Call Trace:
[ 4018.890323]  [<ffffffff9b2d1b0f>] rmap_walk+0x22f/0x380
[ 4018.890323]  [<ffffffff9b2fc841>] remove_migration_ptes+0x41/0x50
[ 4018.890323]  [<ffffffff9b2fd0e0>] ? __migration_entry_wait.isra.24+0x160/0x160
[ 4018.890323]  [<ffffffff9b2fd4d0>] ? remove_migration_pte+0x3f0/0x3f0
[ 4018.890323]  [<ffffffff9b2fe73b>] move_to_new_page+0x16b/0x230
[ 4018.890323]  [<ffffffff9b2d1e8c>] ? try_to_unmap+0x6c/0xf0
[ 4018.890323]  [<ffffffff9b2d08a0>] ? try_to_unmap_nonlinear+0x5c0/0x5c0
[ 4018.890323]  [<ffffffff9b2cf0a0>] ? invalid_migration_vma+0x30/0x30
[ 4018.890323]  [<ffffffff9b2d02e0>] ? page_remove_rmap+0x320/0x320
[ 4018.890323]  [<ffffffff9b2ff19c>] migrate_pages+0x85c/0x930
[ 4018.890323]  [<ffffffff9b2b8e20>] ? isolate_freepages_block+0x410/0x410
[ 4018.890323]  [<ffffffff9b2b7a60>] ? arch_local_save_flags+0x30/0x30
[ 4018.890323]  [<ffffffff9b2b9803>] compact_zone+0x4d3/0x8a0
[ 4018.890323]  [<ffffffff9b2b9c2f>] compact_zone_order+0x5f/0xa0
[ 4018.890323]  [<ffffffff9b2b9f87>] try_to_compact_pages+0x127/0x2f0
[ 4018.890323]  [<ffffffff9b298c98>] __alloc_pages_direct_compact+0x68/0x200
[ 4018.890323]  [<ffffffff9b2995af>] __alloc_pages_nodemask+0x77f/0xd90
[ 4018.890323]  [<ffffffff9b192fad>] ? sched_clock_local+0x1d/0x90
[ 4018.890323]  [<ffffffff9b2e8a1c>] alloc_pages_vma+0x13c/0x270
[ 4018.890323]  [<ffffffff9b305934>] ? do_huge_pmd_wp_page+0x494/0xc90
[ 4018.890323]  [<ffffffff9b305934>] do_huge_pmd_wp_page+0x494/0xc90
[ 4018.890323]  [<ffffffff9b308d40>] ? __mem_cgroup_count_vm_event+0xd0/0x240
[ 4018.890323]  [<ffffffff9b2c4b7d>] handle_mm_fault+0x8bd/0xc50
[ 4018.890323]  [<ffffffff9b1ba6e6>] ? __lock_is_held+0x56/0x80
[ 4018.890323]  [<ffffffff9b0afbc7>] __do_page_fault+0x1b7/0x660
[ 4018.890323]  [<ffffffff9b1b5c5e>] ? put_lock_stats.isra.13+0xe/0x30
[ 4018.890323]  [<ffffffff9b193f41>] ? vtime_account_user+0x91/0xa0
[ 4018.890323]  [<ffffffff9b28ac35>] ? context_tracking_user_exit+0xb5/0x1b0
[ 4018.890323]  [<ffffffff9bb55d33>] ? __this_cpu_preempt_check+0x13/0x20
[ 4018.890323]  [<ffffffff9b1b62e2>] ? trace_hardirqs_off_caller+0xe2/0x1b0
[ 4018.890323]  [<ffffffff9b0b0141>] trace_do_page_fault+0x51/0x2b0
[ 4018.890323]  [<ffffffff9b0a6e83>] do_async_page_fault+0x63/0xd0
[ 4018.890323]  [<ffffffff9e4bccf8>] async_page_fault+0x28/0x30
[ 4018.890323] Code: 0f 0b 48 c7 c6 b0 f2 71 9f 4c 89 f7 e8 b9 79 f9 ff 0f 0b 48 83 c9 02 41 f6 44 24 50 02 0f 85 70 fe ff ff 4c 89 e7 e8 af 4a f9 ff <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55
[ 4018.890323] RIP  [<ffffffff9b2fd4c1>] remove_migration_pte+0x3e1/0x3f0
[ 4018.890323]  RSP <ffff880560c477c8>

And from a different log:

[ 2035.602565] vma ffff88054b666c00 start 00007f561ffad000 end 00007f56203ad000
[ 2035.602565] next ffff88054b665a00 prev ffff8801f7a31800 mm ffff8804f207a000
[ 2035.602565] prot 120 anon_vma           (null) vm_ops ffffffffb5671e80
[ 2035.602565] pgoff 0 file ffff88054b430a80 private_data           (null)
[ 2035.608469] flags: 0x80000f8(shared|mayread|maywrite|mayexec|mayshare)

And on a maybe related note, I've started seeing the following today. It may be because we fixed mbind() in trinity but it could also be related to this issue (free_pgtables() is in the call chain). If you don't think it has anything to do with it let me know and I'll start a new thread:

[ 1195.996803] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1196.001744] IP: __rb_erase_color (include/linux/rbtree_augmented.h:107 lib/rbtree.c:229 lib/rbtree.c:367)
[ 1196.001744] PGD 196787067 PUD 117522067 PMD 0
[ 1196.001744] Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 1196.001744] Dumping ftrace buffer:
[ 1196.001744]    (ftrace buffer empty)
[ 1196.001744] Modules linked in:
[ 1196.001744] CPU: 5 PID: 5724 Comm: trinity-c890 Not tainted 3.17.0-rc4-next-20140910-sasha-00042-ga4bad9b-dirty #1140
[ 1196.001744] task: ffff88024207b000 ti: ffff8808b25e0000 task.ti: ffff8808b25e0000
[ 1196.001744] RIP: __rb_erase_color (include/linux/rbtree_augmented.h:107 lib/rbtree.c:229 lib/rbtree.c:367)
[ 1196.001744] RSP: 0018:ffff8808b25e3d18  EFLAGS: 00010286
[ 1196.001744] RAX: ffff8808890ed059 RBX: ffff88091f75f458 RCX: 0000000000000000
[ 1196.001744] RDX: 0000000000000000 RSI: ffff8800b83396c8 RDI: ffff8808890ed058
[ 1196.001744] RBP: ffff8808b25e3d40 R08: ffff8808890ed058 R09: 0000000000000000
[ 1196.001744] R10: 0000000000000000 R11: ffff88085697d658 R12: ffff8808890ed058
[ 1196.001744] R13: ffffffff912ba700 R14: ffff8800b83396c8 R15: 0000000000000000
[ 1196.001744] FS:  00007f00e4458700(0000) GS:ffff880492c00000(0000) knlGS:0000000000000000
[ 1196.001744] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1196.001744] CR2: 0000000000000000 CR3: 0000000196786000 CR4: 00000000000006a0
[ 1196.001744] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1196.001744] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000070602
[ 1196.001744] Stack:
[ 1196.001744]  ffff88085697d600 ffff8800b5d13480 ffff8800b83396e0 ffff8800b8339660
[ 1196.001744]  ffff88085697d600 ffff8808b25e3d58 ffffffff912ba9e4 ffff88085697d600
[ 1196.001744]  ffff8808b25e3d78 ffffffff912c8446 ffff88085697d600 ffff8800b5d13480
[ 1196.001744] Call Trace:
[ 1196.001744] vma_interval_tree_remove (mm/interval_tree.c:24)
[ 1196.001744] __remove_shared_vm_struct (mm/mmap.c:232)
[ 1196.001744] unlink_file_vma (mm/mmap.c:246)
[ 1196.001744] free_pgtables (mm/memory.c:547)
[ 1196.001744] exit_mmap (mm/mmap.c:2826)
[ 1196.001744] mmput (kernel/fork.c:654)
[ 1196.001744] do_exit (./arch/x86/include/asm/thread_info.h:168 kernel/exit.c:461 kernel/exit.c:746)
[ 1196.001744] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63)
[ 1196.001744] ? trace_hardirqs_on (kernel/locking/lockdep.c:2609)
[ 1196.001744] do_group_exit (./arch/x86/include/asm/current.h:14 kernel/exit.c:874)
[ 1196.001744] SyS_exit_group (kernel/exit.c:900)
[ 1196.001744] tracesys (arch/x86/kernel/entry_64.S:542)
[ 1196.001744] Code: e2 49 89 c4 49 8b 5c 24 08 48 39 d3 0f 84 e2 00 00 00 f6 03 01 75 ad 4c 8b 7b 10 4c 89 e0 48 83 c8 01 4d 89 7c 24 08 4c 89 63 10 <49> 89 07 49 8b 04 24 48 89 03 48 83 e0 fc 49 89 1c 24 0f 84 69
All code
========
   0:	e2 49                	loop   0x4b
   2:	89 c4                	mov    %eax,%esp
   4:	49 8b 5c 24 08       	mov    0x8(%r12),%rbx
   9:	48 39 d3             	cmp    %rdx,%rbx
   c:	0f 84 e2 00 00 00    	je     0xf4
  12:	f6 03 01             	testb  $0x1,(%rbx)
  15:	75 ad                	jne    0xffffffffffffffc4
  17:	4c 8b 7b 10          	mov    0x10(%rbx),%r15
  1b:	4c 89 e0             	mov    %r12,%rax
  1e:	48 83 c8 01          	or     $0x1,%rax
  22:	4d 89 7c 24 08       	mov    %r15,0x8(%r12)
  27:	4c 89 63 10          	mov    %r12,0x10(%rbx)
  2b:*	49 89 07             	mov    %rax,(%r15)		<-- trapping instruction
  2e:	49 8b 04 24          	mov    (%r12),%rax
  32:	48 89 03             	mov    %rax,(%rbx)
  35:	48 83 e0 fc          	and    $0xfffffffffffffffc,%rax
  39:	49 89 1c 24          	mov    %rbx,(%r12)
  3d:	0f                   	.byte 0xf
  3e:	84 69 00             	test   %ch,0x0(%rcx)

Code starting with the faulting instruction
===========================================

   0:	49 89 07             	mov    %rax,(%r15)
   3:	49 8b 04 24          	mov    (%r12),%rax
   7:	48 89 03             	mov    %rax,(%rbx)
   a:	48 83 e0 fc          	and    $0xfffffffffffffffc,%rax
   e:	49 89 1c 24          	mov    %rbx,(%r12)
  12:	0f                   	.byte 0xf
  13:	84 69 00             	test   %ch,0x0(%rcx)
[ 1196.001744] RIP __rb_erase_color (include/linux/rbtree_augmented.h:107 lib/rbtree.c:229 lib/rbtree.c:367)
[ 1196.001744]  RSP <ffff8808b25e3d18>
[ 1196.001744] CR2: 0000000000000000
[ 1196.001744] ---[ end trace 67e0103d243f3c04 ]---
[ 1196.050031] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 1196.050031] IP: __rb_insert_augmented (lib/rbtree.c:94 lib/rbtree.c:411)
[ 1196.050031] PGD a3ea09067 PUD a69b38067 PMD 0
[ 1196.050031] Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
[ 1196.050031] Dumping ftrace buffer:
[ 1196.050031]    (ftrace buffer empty)
[ 1196.050031] Modules linked in:
[ 1196.050031] CPU: 3 PID: 5688 Comm: trinity-c802 Tainted: G      D        3.17.0-rc4-next-20140910-sasha-00042-ga4bad9b-dirty #1140
[ 1196.050031] task: ffff880a508f8000 ti: ffff880a6950c000 task.ti: ffff880a6950c000
[ 1196.050031] RIP: __rb_insert_augmented (lib/rbtree.c:94 lib/rbtree.c:411)
[ 1196.050031] RSP: 0018:ffff880a6950fd68  EFLAGS: 00010246
[ 1196.050031] RAX: ffff88091f75a058 RBX: 0000000000000000 RCX: 0000000000000000
[ 1196.050031] RDX: ffffffff912ba700 RSI: ffff8800b4cb3718 RDI: ffff8802d786ca58
[ 1196.050031] RBP: ffff880a6950fd90 R08: ffff8802d786ca00 R09: ffff8800b4cb3718
[ 1196.050031] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8801fd067400
[ 1196.050031] R13: ffff8802d786ca00 R14: ffff8800b4cb3718 R15: 00007f00e44589d0
[ 1196.050031] FS:  00007f00e4458700(0000) GS:ffff88031ac00000(0000) knlGS:0000000000000000
[ 1196.050031] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1196.050031] CR2: 0000000000000008 CR3: 0000000a62597000 CR4: 00000000000006a0
[ 1196.050031] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1196.050031] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000070602
[ 1196.050031] Stack:
[ 1196.050031]  ffffffff9115499e ffff88028bc7a000 ffff8801fd067400 ffff8802d786ca00
[ 1196.050031]  ffff8800b4cb3730 ffff880a6950fda0 ffffffff912babfd ffff880a6950fe70
[ 1196.050031]  ffffffff91154a77 ffff8800b4cb36b0 000000003ebe3540 0000000000000000
[ 1196.050031] Call Trace:
[ 1196.050031] ? copy_process (kernel/fork.c:409 kernel/fork.c:859 kernel/fork.c:913 kernel/fork.c:1381)
[ 1196.050031] vma_interval_tree_insert_after (mm/interval_tree.c:60)
[ 1196.050031] copy_process (kernel/fork.c:442 kernel/fork.c:859 kernel/fork.c:913 kernel/fork.c:1381)
[ 1196.050031] do_fork (kernel/fork.c:1644)
[ 1196.050031] ? context_tracking_user_exit (./arch/x86/include/asm/paravirt.h:809 (discriminator 2) kernel/context_tracking.c:184 (discriminator 2))
[ 1196.050031] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63)
[ 1196.050031] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2559 kernel/locking/lockdep.c:2601)
[ 1196.050031] ? trace_hardirqs_on (kernel/locking/lockdep.c:2609)
[ 1196.050031] SyS_clone (kernel/fork.c:1733)
[ 1196.050031] stub_clone (arch/x86/kernel/entry_64.S:637)
[ 1196.050031] ? tracesys (arch/x86/kernel/entry_64.S:542)
[ 1196.050031] Code: ff ff 0f 1f 00 48 8b 07 48 85 c0 0f 84 a4 01 00 00 55 48 89 e5 41 56 49 89 f6 41 55 41 54 53 48 83 ec 08 48 8b 18 f6 c3 01 75 6b <48> 8b 4b 08 49 89 d8 48 39 c8 0f 84 a5 00 00 00 48 85 c9 74 05
All code
========
   0:	ff                   	(bad)
   1:	ff 0f                	decl   (%rdi)
   3:	1f                   	(bad)
   4:	00 48 8b             	add    %cl,-0x75(%rax)
   7:	07                   	(bad)
   8:	48 85 c0             	test   %rax,%rax
   b:	0f 84 a4 01 00 00    	je     0x1b5
  11:	55                   	push   %rbp
  12:	48 89 e5             	mov    %rsp,%rbp
  15:	41 56                	push   %r14
  17:	49 89 f6             	mov    %rsi,%r14
  1a:	41 55                	push   %r13
  1c:	41 54                	push   %r12
  1e:	53                   	push   %rbx
  1f:	48 83 ec 08          	sub    $0x8,%rsp
  23:	48 8b 18             	mov    (%rax),%rbx
  26:	f6 c3 01             	test   $0x1,%bl
  29:	75 6b                	jne    0x96
  2b:*	48 8b 4b 08          	mov    0x8(%rbx),%rcx		<-- trapping instruction
  2f:	49 89 d8             	mov    %rbx,%r8
  32:	48 39 c8             	cmp    %rcx,%rax
  35:	0f 84 a5 00 00 00    	je     0xe0
  3b:	48 85 c9             	test   %rcx,%rcx
  3e:	74 05                	je     0x45
	...

Code starting with the faulting instruction
===========================================

   0:	48 8b 4b 08          	mov    0x8(%rbx),%rcx
   4:	49 89 d8             	mov    %rbx,%r8
   7:	48 39 c8             	cmp    %rcx,%rax
   a:	0f 84 a5 00 00 00    	je     0xb5
  10:	48 85 c9             	test   %rcx,%rcx
  13:	74 05                	je     0x1a
	...
[ 1196.050031] RIP __rb_insert_augmented (lib/rbtree.c:94 lib/rbtree.c:411)
[ 1196.050031]  RSP <ffff880a6950fd68>
[ 1196.050031] CR2: 0000000000000008

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#26 lore raw
Quoted 6 lines · Sasha Levin
Quoted 2 lines · Hugh Dickins

Right, and Sasha reports that that can fire, but he sees the bug with this patch in and without that firing.

I've changed that WARN_ON_ONCE() to a VM_BUG_ON_VMA() to get some useful VMA information out, and got the following:

Well, thanks, but Mel and I have both failed to perceive any actual problem arising from that peculiarity. And Mel's warning, and the 900s in yesterday's dumps, have shown that it is not correlated with the pte_mknuma() bug we are chasing. So there isn't anything that I want to look up in these vmas. Or did you notice something interesting in them?

Quoted 2 lines

And on a maybe related note, I've started seeing the following today. It may be because we fixed mbind() in trinity but it could also be related to

The fixed trinity may be counter-productive for now, since we think there is an understandable pte_mknuma() bug coming from that direction, but have not posted a patch for it yet.

Quoted 13 lines

this issue (free_pgtables() is in the call chain). If you don't think it has anything to do with it let me know and I'll start a new thread:

[ 1195.996803] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1196.001744] IP: __rb_erase_color (include/linux/rbtree_augmented.h:107 lib/rbtree.c:229 lib/rbtree.c:367)
[ 1196.001744] Call Trace:
[ 1196.001744] vma_interval_tree_remove (mm/interval_tree.c:24)
[ 1196.001744] __remove_shared_vm_struct (mm/mmap.c:232)
[ 1196.001744] unlink_file_vma (mm/mmap.c:246)
[ 1196.001744] free_pgtables (mm/memory.c:547)
[ 1196.001744] exit_mmap (mm/mmap.c:2826)
[ 1196.001744] mmput (kernel/fork.c:654)
[ 1196.001744] do_exit (./arch/x86/include/asm/thread_info.h:168 kernel/exit.c:461 kernel/exit.c:746)

I didn't study in any detail, but this one seems much more like the zeroing and vma corruption that you've been seeing in other dumps.

Though a single pte_mknuma() crash could presumably be caused by vma corruption (but I think not mere zeroing), the recurrent way in which you hit that pte_mknuma() bug in particular makes it unlikely to be caused by random corruption.

You are generating new crashes faster than we can keep up with them. Would this be a suitable point for you to switch over to testing 3.17-rc, to see if that is as unstable for you as -next is?

That VM_BUG_ON(!(val & _PAGE_PRESENT)) is not in the 3.17-rc tree, but I think you can "safely" add it to 3.17-rc. Quotes around "safely" meaning that we know that there's a bug to hit, at least in -next, but I don't think it's going to be hit for stupid obvious reasons.

And you're using a gcc 5 these days? That's another variable to try removing from the mix, to see if it makes a difference.

Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#27 lore raw
Quoted 5 lines · Hugh Dickins
Quoted 4 lines · Sasha Levin
Quoted 2 lines · Hugh Dickins

Right, and Sasha reports that that can fire, but he sees the bug with this patch in and without that firing.

Quoted 8 lines
Quoted 2 lines

I've changed that WARN_ON_ONCE() to a VM_BUG_ON_VMA() to get some useful VMA information out, and got the following:

Well, thanks, but Mel and I have both failed to perceive any actual problem arising from that peculiarity. And Mel's warning, and the 900s in yesterday's dumps, have shown that it is not correlated with the pte_mknuma() bug we are chasing. So there isn't anything that I want to look up in these vmas. Or did you notice something interesting in them?

I thought this was a separate issue that would need taking care of as well.

Quoted 6 lines
Quoted 2 lines

And on a maybe related note, I've started seeing the following today. It may be because we fixed mbind() in trinity but it could also be related to

The fixed trinity may be counter-productive for now, since we think there is an understandable pte_mknuma() bug coming from that direction, but have not posted a patch for it yet.

I'm still seeing the bug with fixed trinity, it was a matter of adding more flags to mbind.

Quoted 26 lines
Quoted 13 lines

this issue (free_pgtables() is in the call chain). If you don't think it has anything to do with it let me know and I'll start a new thread:

[ 1195.996803] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1196.001744] IP: __rb_erase_color (include/linux/rbtree_augmented.h:107 lib/rbtree.c:229 lib/rbtree.c:367)
[ 1196.001744] Call Trace:
[ 1196.001744] vma_interval_tree_remove (mm/interval_tree.c:24)
[ 1196.001744] __remove_shared_vm_struct (mm/mmap.c:232)
[ 1196.001744] unlink_file_vma (mm/mmap.c:246)
[ 1196.001744] free_pgtables (mm/memory.c:547)
[ 1196.001744] exit_mmap (mm/mmap.c:2826)
[ 1196.001744] mmput (kernel/fork.c:654)
[ 1196.001744] do_exit (./arch/x86/include/asm/thread_info.h:168 kernel/exit.c:461 kernel/exit.c:746)

I didn't study in any detail, but this one seems much more like the zeroing and vma corruption that you've been seeing in other dumps.

Though a single pte_mknuma() crash could presumably be caused by vma corruption (but I think not mere zeroing), the recurrent way in which you hit that pte_mknuma() bug in particular makes it unlikely to be caused by random corruption.

You are generating new crashes faster than we can keep up with them. Would this be a suitable point for you to switch over to testing 3.17-rc, to see if that is as unstable for you as -next is?

Quoted 5 lines

That VM_BUG_ON(!(val & _PAGE_PRESENT)) is not in the 3.17-rc tree, but I think you can "safely" add it to 3.17-rc. Quotes around "safely" meaning that we know that there's a bug to hit, at least in -next, but I don't think it's going to be hit for stupid obvious reasons.

I'll try it, usually I just hit a bunch of issues that were already fixed in -next, which is why I try sticking to one tree.

Quoted 2 lines

And you're using a gcc 5 these days? That's another variable to try removing from the mix, to see if it makes a difference.

I'm seeing the BUG getting hit with 4.7.2, so I don't think it's compiler dependant. I'll try reproducing everything I reported yesterday with 4.7.2 just in case, but I don't think that this is the issue.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#28 lore raw
Quoted 6 lines · Sasha Levin
Quoted 3 lines

The fixed trinity may be counter-productive for now, since we think there is an understandable pte_mknuma() bug coming from that direction, but have not posted a patch for it yet.

I'm still seeing the bug with fixed trinity, it was a matter of adding more flags to mbind.

What did I miss ? Anything not in the MPOL_MF_VALID mask should be -EINVAL

Dave

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#29 lore raw
In reply to Hugh Dickins
Quoted 35 lines · Hugh Dickins
Quoted 6 lines · Sasha Levin
Quoted 2 lines · Hugh Dickins

Right, and Sasha reports that that can fire, but he sees the bug with this patch in and without that firing.

I've changed that WARN_ON_ONCE() to a VM_BUG_ON_VMA() to get some useful VMA information out, and got the following:

Well, thanks, but Mel and I have both failed to perceive any actual problem arising from that peculiarity. And Mel's warning, and the 900s in yesterday's dumps, have shown that it is not correlated with the pte_mknuma() bug we are chasing. So there isn't anything that I want to look up in these vmas. Or did you notice something interesting in them?

Quoted 2 lines

And on a maybe related note, I've started seeing the following today. It may be because we fixed mbind() in trinity but it could also be related to

The fixed trinity may be counter-productive for now, since we think there is an understandable pte_mknuma() bug coming from that direction, but have not posted a patch for it yet.

Quoted 13 lines

this issue (free_pgtables() is in the call chain). If you don't think it has anything to do with it let me know and I'll start a new thread:

[ 1195.996803] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1196.001744] IP: __rb_erase_color (include/linux/rbtree_augmented.h:107 lib/rbtree.c:229 lib/rbtree.c:367)
[ 1196.001744] Call Trace:
[ 1196.001744] vma_interval_tree_remove (mm/interval_tree.c:24)
[ 1196.001744] __remove_shared_vm_struct (mm/mmap.c:232)
[ 1196.001744] unlink_file_vma (mm/mmap.c:246)
[ 1196.001744] free_pgtables (mm/memory.c:547)
[ 1196.001744] exit_mmap (mm/mmap.c:2826)
[ 1196.001744] mmput (kernel/fork.c:654)
[ 1196.001744] do_exit (./arch/x86/include/asm/thread_info.h:168 kernel/exit.c:461 kernel/exit.c:746)
Quoted 3 lines

I didn't study in any detail, but this one seems much more like the zeroing and vma corruption that you've been seeing in other dumps.

I didn't look through the dumps closely today because I spent the time putting together a KVM setup similar to Sasha's (many cpus, fake NUMA, etc) so I could run trinity in it in another attempt to reproduce this. I did not encounter the same VM_BUG_ON unfortunately. However, trinity itself crashed after 2.5 hours complaining

[watchdog] pid 32188 has disappeared. Reaping. [watchdog] pid 32024 has disappeared. Reaping. [watchdog] pid 32300 has disappeared. Reaping. [watchdog] Sanity check failed! Found pid 0 at pidslot 35!

This did not happen when running on bare metal. This error makes me wonder if it is evidence that there is zeroing corruption occuring when running inside KVM. Another possibility is that it's somehow related to fake NUMA although it's hard to see how. It's still possible the bug is with the page table handling and KVM affects timing enough to cause problems so I'm not ruling that out.

Quoted 9 lines

Though a single pte_mknuma() crash could presumably be caused by vma corruption (but I think not mere zeroing), the recurrent way in which you hit that pte_mknuma() bug in particular makes it unlikely to be caused by random corruption.

You are generating new crashes faster than we can keep up with them. Would this be a suitable point for you to switch over to testing 3.17-rc, to see if that is as unstable for you as -next is?

Quoted 6 lines

That VM_BUG_ON(!(val & _PAGE_PRESENT)) is not in the 3.17-rc tree, but I think you can "safely" add it to 3.17-rc. Quotes around "safely" meaning that we know that there's a bug to hit, at least in -next, but I don't think it's going to be hit for stupid obvious reasons.

Agreed. If 3.17-rc4 looks stable with the VM_BUG_ON then it would be really nice if you could bisect 3.17-rc4 to linux-next carrying the VM_BUG_ON(!(val & _PAGE_PRESENT)) check at each bisection point. I'm not 100% sure if I'm seeing the same corruption as you or some other issue and do not want to conflate numerous different problems into one. I know this is a pain in the ass but if 3.17-rc4 looks stable then a bisection might be faster overall than my constant head scratching :(

Signature · 2 lines
Mel Gorman
SUSE Labs
#30 lore raw
Quoted 7 lines · Mel Gorman

Agreed. If 3.17-rc4 looks stable with the VM_BUG_ON then it would be really nice if you could bisect 3.17-rc4 to linux-next carrying the VM_BUG_ON(!(val & _PAGE_PRESENT)) check at each bisection point. I'm not 100% sure if I'm seeing the same corruption as you or some other issue and do not want to conflate numerous different problems into one. I know this is a pain in the ass but if 3.17-rc4 looks stable then a bisection might be faster overall than my constant head scratching :(

The good news are that 3.17-rc4 seems to be stable. I'll start the bisection, which I suspect would take several days. I'll update when I run into something.

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#31 lore raw
Quoted 10 lines · Sasha Levin
Quoted 7 lines · Mel Gorman
Quoted 7 lines

Agreed. If 3.17-rc4 looks stable with the VM_BUG_ON then it would be really nice if you could bisect 3.17-rc4 to linux-next carrying the VM_BUG_ON(!(val & _PAGE_PRESENT)) check at each bisection point. I'm not 100% sure if I'm seeing the same corruption as you or some other issue and do not want to conflate numerous different problems into one. I know this is a pain in the ass but if 3.17-rc4 looks stable then a bisection might be faster overall than my constant head scratching :(

The good news are that 3.17-rc4 seems to be stable. I'll start the bisection, which I suspect would take several days. I'll update when I run into something.

I might need a bit of a help here. The bisection is going sideways because I can't reliably reproduce the issue.

We don't know what's causing this issue, but we know what the symptoms are. Is there a VM_BUG_ON we could add somewhere so that it would be more likely to trigger?

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#32 lore raw
In reply to Hugh Dickins
Quoted 3 lines · Hugh Dickins

Sasha, you say you're getting plenty of these now, but I've only seen the dump for one of them, on Aug26: please post a few more dumps, so that we can look for commonality.

I wasn't saving older logs for this issue so I only have 2 traces from tonight. If that's not enough please let me know and I'll try to add a few more.

[ 1125.600123] kernel BUG at include/asm-generic/pgtable.h:724!
[ 1125.600123] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 1125.600123] Dumping ftrace buffer:
[ 1125.600123]    (ftrace buffer empty)
[ 1125.600123] Modules linked in:
[ 1125.600123] CPU: 16 PID: 11903 Comm: trinity-c517 Not tainted 3.17.0-rc4-next-20140909-sasha-00032-gc16d47b #1135
[ 1125.600123] task: ffff880661730000 ti: ffff880582c20000 task.ti: ffff880582c20000
[ 1125.600123] RIP: 0010:[<ffffffffa32e500a>]  [<ffffffffa32e500a>] change_pte_range+0x4ea/0x4f0
[ 1125.600123] RSP: 0018:ffff880582c23d68  EFLAGS: 00010246
[ 1125.600123] RAX: 0000000936d9a900 RBX: 00007ffdb17c8000 RCX: 0000000000000100
[ 1125.600123] RDX: 0000000936d9a900 RSI: 00007ffdb17c8000 RDI: 0000000936d9a900
[ 1125.600123] RBP: ffff880582c23dc8 R08: ffff8802a8f2d400 R09: 0000000000b56000
[ 1125.600123] R10: 0000000000020201 R11: 0000000000000008 R12: ffff88004dd6ee40
[ 1125.600123] R13: 8000000000000025 R14: 00007ffdb1800000 R15: ffffc00000000fff
[ 1125.600123] FS:  00007ffdb6382700(0000) GS:ffff880278200000(0000) knlGS:0000000000000000
[ 1125.600123] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1125.600123] CR2: 00007ffdb617e60c CR3: 000000050ff12000 CR4: 00000000000006a0
[ 1125.600123] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1125.600123] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 1125.600123] Stack:
[ 1125.600123]  0000000000000001 0000000936d9a900 0000000000000046 ffff8804bd549f40
[ 1125.600123]  000000001f989000 ffff8802a8f2d400 ffff88051f989000 00007f9f40604cfdb1ac8000
[ 1125.600123]  ffff88032fcc3c58 00007ffdb16df000 00007ffdb16df000 00007ffdb1800000
[ 1125.600123] Call Trace:
[ 1125.600123]  [<ffffffffa32e52c4>] change_protection+0x2b4/0x4e0
[ 1125.600123]  [<ffffffffa32fefdb>] change_prot_numa+0x1b/0x40
[ 1125.600123]  [<ffffffffa31add86>] task_numa_work+0x1f6/0x330
[ 1125.600123]  [<ffffffffa3193d84>] task_work_run+0xc4/0xf0
[ 1125.600123]  [<ffffffffa3071477>] do_notify_resume+0x97/0xb0
[ 1125.600123]  [<ffffffffa650daea>] int_signal+0x12/0x17
[ 1125.600123] Code: 66 90 48 8b 7d b8 e8 f6 75 22 03 48 8b 45 b0 e9 6f ff ff ff 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b <0f> 0b 0f 0b 0f 0b 66 66 66 66 90 55 48 89 e5 41 57 49 89 d7 41
[ 1125.600123] RIP  [<ffffffffa32e500a>] change_pte_range+0x4ea/0x4f0
[ 1125.600123]  RSP <ffff880582c23d68>
[ 3131.084176] kernel BUG at include/asm-generic/pgtable.h:724!
[ 3131.087358] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3131.090143] Dumping ftrace buffer:
[ 3131.090143]    (ftrace buffer empty)
[ 3131.090143] Modules linked in:
[ 3131.090143] CPU: 8 PID: 20595 Comm: trinity-c34 Not tainted 3.17.0-rc4-next-20140909-sasha-00032-gc16d47b #1135
[ 3131.090143] task: ffff8801ded60000 ti: ffff8803204ec000 task.ti: ffff8803204ec000
[ 3131.090143] RIP: 0010:[<ffffffffa72e500a>]  [<ffffffffa72e500a>] change_pte_range+0x4ea/0x4f0
[ 3131.090143] RSP: 0000:ffff8803204efd68  EFLAGS: 00010246
[ 3131.090143] RAX: 0000000971bba900 RBX: 00007ffda1d4d000 RCX: 0000000000000100
[ 3131.090143] RDX: 0000000971bba900 RSI: 00007ffda1d4d000 RDI: 0000000971bba900
[ 3131.120281] RBP: ffff8803204efdc8 R08: ffff88026bed8800 R09: 0000000000b48000
[ 3131.120281] R10: 0000000000076501 R11: 0000000000000008 R12: ffff8801ca071a68
[ 3131.120281] R13: 8000000000000025 R14: 00007ffda1dbf000 R15: ffffc00000000fff
[ 3131.120281] FS:  00007ffda5cd4700(0000) GS:ffff880277e00000(0000) knlGS:0000000000000000
[ 3131.120281] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3131.120281] CR2: 00000000025d6000 CR3: 00000004bcde2000 CR4: 00000000000006a0
[ 3131.120281] Stack:
[ 3131.120281]  0000000000000001 0000000971bba900 000000000000005c ffff8800661a7b60
[ 3131.120281]  00000000f4953000 ffff88026bed8800 ffff8801f4953000 00007ffda1dbf000
[ 3131.120281]  ffff8802b3319870 00007ffda1c1b000 00007ffda1c1b000 00007ffda1dbf000
[ 3131.120281] Call Trace:
[ 3131.120281]  [<ffffffffa72e52c4>] change_protection+0x2b4/0x4e0
[ 3131.120281]  [<ffffffffa72fefdb>] change_prot_numa+0x1b/0x40
[ 3131.120281]  [<ffffffffa71add86>] task_numa_work+0x1f6/0x330
[ 3131.120281]  [<ffffffffa7193d84>] task_work_run+0xc4/0xf0
[ 3131.120281]  [<ffffffffa7071477>] do_notify_resume+0x97/0xb0
[ 3131.120281]  [<ffffffffaa50e6ae>] retint_signal+0x4d/0x9f
[ 3131.120281] Code: 66 90 48 8b 7d b8 e8 f6 75 22 03 48 8b 45 b0 e9 6f ff ff ff 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b <0f> 0b 0f 0b 0f 0b 66 66 66 66 90 55 48 89 e5 41 57 49 89 d7 41
[ 3131.120281] RIP  [<ffffffffa72e500a>] change_pte_range+0x4ea/0x4f0
[ 3131.120281]  RSP <ffff8803204efd68>
Quoted 4 lines

And please attach a disassembly of change_protection_range() (noting which of the dumps it corresponds to, in case it has changed around):
"Code" just shows a cluster of ud2s for the unlikely bugs at end of the function, we cannot tell at all what should be in the registers by then.

change_protection_range() got inlined into change_protection(), it applies to both traces above:

00000000000004f0 <change_protection>:
4f0: e8 00 00 00 00 callq 4f5 <change_protection+0x5>

			4f1: R_X86_64_PC32	__fentry__-0x4
 4f5:	55                   	push   %rbp
 4f6:	48 89 e5             	mov    %rsp,%rbp
 4f9:	41 57                	push   %r15
 4fb:	49 89 d7             	mov    %rdx,%r15
 4fe:	41 56                	push   %r14
 500:	41 55                	push   %r13
 502:	41 54                	push   %r12
 504:	53                   	push   %rbx
 505:	48 81 ec 98 00 00 00 	sub    $0x98,%rsp
 50c:	48 89 7d c8          	mov    %rdi,-0x38(%rbp)
 510:	48 89 75 c0          	mov    %rsi,-0x40(%rbp)
 514:	48 89 4d b8          	mov    %rcx,-0x48(%rbp)
 518:	44 89 45 98          	mov    %r8d,-0x68(%rbp)
 51c:	44 89 4d 9c          	mov    %r9d,-0x64(%rbp)
 520:	f6 47 52 40          	testb  $0x40,0x52(%rdi)
 524:	0f 85 96 03 00 00    	jne    8c0 <change_protection+0x3d0>
 52a:	48 8b 45 c8          	mov    -0x38(%rbp),%rax
 52e:	48 8b 40 40          	mov    0x40(%rax),%rax
 532:	48 89 45 80          	mov    %rax,-0x80(%rbp)
 536:	48 39 55 c0          	cmp    %rdx,-0x40(%rbp)
 53a:	0f 83 40 04 00 00    	jae    980 <change_protection+0x490>
 540:	4c 8b 5d c0          	mov    -0x40(%rbp),%r11
 544:	48 8b 4d 80          	mov    -0x80(%rbp),%rcx
 548:	4c 89 d8             	mov    %r11,%rax
 54b:	48 c1 e8 24          	shr    $0x24,%rax
 54f:	c6 81 dc 08 00 00 01 	movb   $0x1,0x8dc(%rcx)
 556:	25 f8 0f 00 00       	and    $0xff8,%eax
 55b:	48 03 41 40          	add    0x40(%rcx),%rax
 55f:	48 8d 52 ff          	lea    -0x1(%rdx),%rdx
 563:	4c 89 7d d0          	mov    %r15,-0x30(%rbp)
 567:	49 89 c7             	mov    %rax,%r15
 56a:	48 89 55 b0          	mov    %rdx,-0x50(%rbp)
 56e:	48 c7 45 a8 00 00 00 	movq   $0x0,-0x58(%rbp)
 575:	00
 576:	48 b8 00 00 00 00 80 	movabs $0x8000000000,%rax
 57d:	00 00 00
 580:	49 8b 3f             	mov    (%r15),%rdi
 583:	49 bd 00 00 00 00 80 	movabs $0xffffff8000000000,%r13
 58a:	ff ff ff
 58d:	4c 01 d8             	add    %r11,%rax
 590:	49 21 c5             	and    %rax,%r13
 593:	49 8d 45 ff          	lea    -0x1(%r13),%rax
 597:	48 3b 45 b0          	cmp    -0x50(%rbp),%rax
 59b:	4c 0f 43 6d d0       	cmovae -0x30(%rbp),%r13
 5a0:	48 85 ff             	test   %rdi,%rdi
 5a3:	0f 84 2f 02 00 00    	je     7d8 <change_protection+0x2e8>
 5a9:	48 b8 fb 0f 00 00 00 	movabs $0xffffc00000000ffb,%rax
 5b0:	c0 ff ff
 5b3:	48 21 f8             	and    %rdi,%rax
 5b6:	48 83 f8 63          	cmp    $0x63,%rax
 5ba:	0f 85 98 03 00 00    	jne    958 <change_protection+0x468>
 5c0:	48 83 3d 00 00 00 00 	cmpq   $0x0,0x0(%rip)        # 5c8 <change_protection+0xd8>
 5c7:	00
			5c3: R_X86_64_PC32	pv_mmu_ops+0xf3
 5c8:	0f 84 d2 03 00 00    	je     9a0 <change_protection+0x4b0>
 5ce:	ff 14 25 00 00 00 00 	callq  *0x0
			5d1: R_X86_64_32S	pv_mmu_ops+0xf8
 5d5:	4c 89 df             	mov    %r11,%rdi
 5d8:	4d 89 ea             	mov    %r13,%r10
 5db:	4c 89 bd 60 ff ff ff 	mov    %r15,-0xa0(%rbp)
 5e2:	48 ba 00 f0 ff ff ff 	movabs $0x3ffffffff000,%rdx
 5e9:	3f 00 00
 5ec:	48 c1 ef 1b          	shr    $0x1b,%rdi
 5f0:	48 21 d0             	and    %rdx,%rax
 5f3:	48 be 00 00 00 00 00 	movabs $0xffff880000000000,%rsi
 5fa:	88 ff ff
 5fd:	48 c7 85 68 ff ff ff 	movq   $0x0,-0x98(%rbp)
 604:	00 00 00 00
 608:	81 e7 f8 0f 00 00    	and    $0xff8,%edi
 60e:	48 89 95 70 ff ff ff 	mov    %rdx,-0x90(%rbp)
 615:	48 01 f7             	add    %rsi,%rdi
 618:	4c 8d 34 07          	lea    (%rdi,%rax,1),%r14
 61c:	49 8d 45 ff          	lea    -0x1(%r13),%rax
 620:	4d 89 f5             	mov    %r14,%r13
 623:	4d 89 de             	mov    %r11,%r14
 626:	48 89 45 a0          	mov    %rax,-0x60(%rbp)
 62a:	49 8d 9e 00 00 00 40 	lea    0x40000000(%r14),%rbx
 631:	49 8b 7d 00          	mov    0x0(%r13),%rdi
 635:	48 81 e3 00 00 00 c0 	and    $0xffffffffc0000000,%rbx
 63c:	48 8d 43 ff          	lea    -0x1(%rbx),%rax
 640:	48 3b 45 a0          	cmp    -0x60(%rbp),%rax
 644:	49 0f 43 da          	cmovae %r10,%rbx
 648:	48 85 ff             	test   %rdi,%rdi
 64b:	0f 84 ff 01 00 00    	je     850 <change_protection+0x360>
 651:	48 b8 98 0f 00 00 00 	movabs $0xffffc00000000f98,%rax
 658:	c0 ff ff
 65b:	48 85 c7             	test   %rax,%rdi
 65e:	0f 85 04 03 00 00    	jne    968 <change_protection+0x478>
 664:	48 83 3d 00 00 00 00 	cmpq   $0x0,0x0(%rip)        # 66c <change_protection+0x17c>
 66b:	00
			667: R_X86_64_PC32	pv_mmu_ops+0x11b
 66c:	0f 84 4e 03 00 00    	je     9c0 <change_protection+0x4d0>
 672:	48 8b 45 c8          	mov    -0x38(%rbp),%rax
 676:	48 8b 40 40          	mov    0x40(%rax),%rax
 67a:	48 89 85 78 ff ff ff 	mov    %rax,-0x88(%rbp)
 681:	ff 14 25 00 00 00 00 	callq  *0x0
			684: R_X86_64_32S	pv_mmu_ops+0x120
 688:	48 23 85 70 ff ff ff 	and    -0x90(%rbp),%rax
 68f:	4d 89 f4             	mov    %r14,%r12
 692:	45 31 db             	xor    %r11d,%r11d
 695:	4c 89 ad 48 ff ff ff 	mov    %r13,-0xb8(%rbp)
 69c:	49 c1 ec 12          	shr    $0x12,%r12
 6a0:	48 c7 45 88 00 00 00 	movq   $0x0,-0x78(%rbp)
 6a7:	00
 6a8:	4d 89 dd             	mov    %r11,%r13
 6ab:	41 81 e4 f8 0f 00 00 	and    $0xff8,%r12d
 6b2:	4c 89 95 50 ff ff ff 	mov    %r10,-0xb0(%rbp)
 6b9:	48 ba 00 00 00 00 00 	movabs $0xffff880000000000,%rdx
 6c0:	88 ff ff
 6c3:	48 c7 85 58 ff ff ff 	movq   $0x0,-0xa8(%rbp)
 6ca:	00 00 00 00
 6ce:	49 01 d4             	add    %rdx,%r12
 6d1:	49 01 c4             	add    %rax,%r12
 6d4:	48 8d 43 ff          	lea    -0x1(%rbx),%rax
 6d8:	48 89 45 90          	mov    %rax,-0x70(%rbp)
 6dc:	4d 8d be 00 00 20 00 	lea    0x200000(%r14),%r15
 6e3:	49 8b 3c 24          	mov    (%r12),%rdi
 6e7:	49 81 e7 00 00 e0 ff 	and    $0xffffffffffe00000,%r15
 6ee:	49 8d 47 ff          	lea    -0x1(%r15),%rax
 6f2:	48 3b 45 90          	cmp    -0x70(%rbp),%rax
 6f6:	4c 0f 43 fb          	cmovae %rbx,%r15
 6fa:	48 83 3d 00 00 00 00 	cmpq   $0x0,0x0(%rip)        # 702 <change_protection+0x212>
 701:	00
			6fd: R_X86_64_PC32	pv_mmu_ops+0x10b
 702:	0f 84 60 01 00 00    	je     868 <change_protection+0x378>
 708:	ff 14 25 00 00 00 00 	callq  *0x0
			70b: R_X86_64_32S	pv_mmu_ops+0x110
 70f:	a8 80                	test   $0x80,%al
 711:	0f 84 59 01 00 00    	je     870 <change_protection+0x380>
 717:	4d 85 ed             	test   %r13,%r13
 71a:	75 18                	jne    734 <change_protection+0x244>
 71c:	48 8b 85 78 ff ff ff 	mov    -0x88(%rbp),%rax
 723:	4d 89 f5             	mov    %r14,%r13
 726:	48 83 b8 c0 04 00 00 	cmpq   $0x0,0x4c0(%rax)
 72d:	00
 72e:	0f 85 54 02 00 00    	jne    988 <change_protection+0x498>
 734:	48 83 3d 00 00 00 00 	cmpq   $0x0,0x0(%rip)        # 73c <change_protection+0x24c>
 73b:	00
			737: R_X86_64_PC32	pv_mmu_ops+0x10b
 73c:	49 8b 3c 24          	mov    (%r12),%rdi
 740:	0f 84 22 01 00 00    	je     868 <change_protection+0x378>
 746:	ff 14 25 00 00 00 00 	callq  *0x0
			749: R_X86_64_32S	pv_mmu_ops+0x110
 74d:	a8 80                	test   $0x80,%al
 74f:	74 33                	je     784 <change_protection+0x294>
 751:	4c 89 f8             	mov    %r15,%rax
 754:	4c 29 f0             	sub    %r14,%rax
 757:	48 3d 00 00 20 00    	cmp    $0x200000,%rax
 75d:	0f 84 7d 01 00 00    	je     8e0 <change_protection+0x3f0>
 763:	48 83 3d 00 00 00 00 	cmpq   $0x0,0x0(%rip)        # 76b <change_protection+0x27b>
 76a:	00
			766: R_X86_64_PC32	pv_mmu_ops+0x10b
 76b:	49 8b 3c 24          	mov    (%r12),%rdi
 76f:	0f 84 f3 00 00 00    	je     868 <change_protection+0x378>
 775:	ff 14 25 00 00 00 00 	callq  *0x0
			778: R_X86_64_32S	pv_mmu_ops+0x110
 77c:	a8 80                	test   $0x80,%al
 77e:	0f 85 24 02 00 00    	jne    9a8 <change_protection+0x4b8>
 784:	8b 45 9c             	mov    -0x64(%rbp),%eax
 787:	4c 89 f9             	mov    %r15,%rcx
 78a:	4c 89 f2             	mov    %r14,%rdx
 78d:	4c 89 e6             	mov    %r12,%rsi
 790:	44 8b 4d 98          	mov    -0x68(%rbp),%r9d
 794:	4c 8b 45 b8          	mov    -0x48(%rbp),%r8
 798:	48 8b 7d c8          	mov    -0x38(%rbp),%rdi
 79c:	89 04 24             	mov    %eax,(%rsp)
 79f:	e8 5c f8 ff ff       	callq  0 <change_pte_range>
 7a4:	48 01 45 88          	add    %rax,-0x78(%rbp)
 7a8:	49 83 c4 08          	add    $0x8,%r12
 7ac:	4c 39 fb             	cmp    %r15,%rbx
 7af:	74 3f                	je     7f0 <change_protection+0x300>
 7b1:	4d 89 fe             	mov    %r15,%r14
 7b4:	e9 23 ff ff ff       	jmpq   6dc <change_protection+0x1ec>
 7b9:	0f 1f 80 00 00 00 00 	nopl   0x0(%rax)
 7c0:	48 8b b5 68 ff ff ff 	mov    -0x98(%rbp),%rsi
 7c7:	4d 89 d5             	mov    %r10,%r13
 7ca:	4c 8b bd 60 ff ff ff 	mov    -0xa0(%rbp),%r15
 7d1:	48 01 75 a8          	add    %rsi,-0x58(%rbp)
 7d5:	0f 1f 00             	nopl   (%rax)
 7d8:	49 83 c7 08          	add    $0x8,%r15
 7dc:	4c 39 6d d0          	cmp    %r13,-0x30(%rbp)
 7e0:	0f 84 3a 01 00 00    	je     920 <change_protection+0x430>
 7e6:	4d 89 eb             	mov    %r13,%r11
 7e9:	e9 88 fd ff ff       	jmpq   576 <change_protection+0x86>
 7ee:	66 90                	xchg   %ax,%ax
 7f0:	4d 89 eb             	mov    %r13,%r11
 7f3:	4c 8b 95 50 ff ff ff 	mov    -0xb0(%rbp),%r10
 7fa:	4c 8b ad 48 ff ff ff 	mov    -0xb8(%rbp),%r13
 801:	4d 85 db             	test   %r11,%r11
 804:	74 2a                	je     830 <change_protection+0x340>
 806:	48 8b 85 78 ff ff ff 	mov    -0x88(%rbp),%rax
 80d:	48 83 b8 c0 04 00 00 	cmpq   $0x0,0x4c0(%rax)
 814:	00
 815:	74 19                	je     830 <change_protection+0x340>
 817:	48 89 da             	mov    %rbx,%rdx
 81a:	4c 89 de             	mov    %r11,%rsi
 81d:	48 89 c7             	mov    %rax,%rdi
 820:	4c 89 55 90          	mov    %r10,-0x70(%rbp)
 824:	e8 00 00 00 00       	callq  829 <change_protection+0x339>
			825: R_X86_64_PC32	__mmu_notifier_invalidate_range_end-0x4
 829:	4c 8b 55 90          	mov    -0x70(%rbp),%r10
 82d:	0f 1f 00             	nopl   (%rax)
 830:	48 8b 85 58 ff ff ff 	mov    -0xa8(%rbp),%rax
 837:	48 85 c0             	test   %rax,%rax
 83a:	74 09                	je     845 <change_protection+0x355>
 83c:	65 48 01 04 25 00 00 	add    %rax,%gs:0x0
 843:	00 00
			841: R_X86_64_32S	vm_event_states+0x170
 845:	48 8b 75 88          	mov    -0x78(%rbp),%rsi
 849:	48 01 b5 68 ff ff ff 	add    %rsi,-0x98(%rbp)
 850:	49 83 c5 08          	add    $0x8,%r13
 854:	49 39 da             	cmp    %rbx,%r10
 857:	0f 84 63 ff ff ff    	je     7c0 <change_protection+0x2d0>
 85d:	49 89 de             	mov    %rbx,%r14
 860:	e9 c5 fd ff ff       	jmpq   62a <change_protection+0x13a>
 865:	0f 1f 00             	nopl   (%rax)
 868:	0f 0b                	ud2
 86a:	66 0f 1f 44 00 00    	nopw   0x0(%rax,%rax,1)
 870:	49 8b 04 24          	mov    (%r12),%rax
 874:	48 85 c0             	test   %rax,%rax
 877:	0f 84 2b ff ff ff    	je     7a8 <change_protection+0x2b8>
 87d:	48 89 c2             	mov    %rax,%rdx
 880:	81 e2 01 02 00 00    	and    $0x201,%edx
 886:	48 81 fa 00 02 00 00 	cmp    $0x200,%rdx
 88d:	0f 84 84 fe ff ff    	je     717 <change_protection+0x227>
 893:	48 be fb 0f 00 00 00 	movabs $0xffffc00000000ffb,%rsi
 89a:	c0 ff ff
 89d:	48 21 f0             	and    %rsi,%rax
 8a0:	48 83 f8 63          	cmp    $0x63,%rax
 8a4:	0f 84 6d fe ff ff    	je     717 <change_protection+0x227>
 8aa:	4c 89 e7             	mov    %r12,%rdi
 8ad:	e8 00 00 00 00       	callq  8b2 <change_protection+0x3c2>
			8ae: R_X86_64_PC32	pmd_clear_bad-0x4
 8b2:	e9 f1 fe ff ff       	jmpq   7a8 <change_protection+0x2b8>
 8b7:	66 0f 1f 84 00 00 00 	nopw   0x0(%rax,%rax,1)
 8be:	00 00
 8c0:	e8 00 00 00 00       	callq  8c5 <change_protection+0x3d5>
			8c1: R_X86_64_PC32	hugetlb_change_protection-0x4
 8c5:	48 89 45 a8          	mov    %rax,-0x58(%rbp)
 8c9:	48 8b 45 a8          	mov    -0x58(%rbp),%rax
 8cd:	48 81 c4 98 00 00 00 	add    $0x98,%rsp
 8d4:	5b                   	pop    %rbx
 8d5:	41 5c                	pop    %r12
 8d7:	41 5d                	pop    %r13
 8d9:	41 5e                	pop    %r14
 8db:	41 5f                	pop    %r15
 8dd:	5d                   	pop    %rbp
 8de:	c3                   	retq
 8df:	90                   	nop
 8e0:	44 8b 45 9c          	mov    -0x64(%rbp),%r8d
 8e4:	4c 89 f2             	mov    %r14,%rdx
 8e7:	4c 89 e6             	mov    %r12,%rsi
 8ea:	48 8b 4d b8          	mov    -0x48(%rbp),%rcx
 8ee:	48 8b 7d c8          	mov    -0x38(%rbp),%rdi
 8f2:	e8 00 00 00 00       	callq  8f7 <change_protection+0x407>
			8f3: R_X86_64_PC32	change_huge_pmd-0x4
 8f7:	85 c0                	test   %eax,%eax
 8f9:	0f 84 85 fe ff ff    	je     784 <change_protection+0x294>
 8ff:	3d 00 02 00 00       	cmp    $0x200,%eax
 904:	0f 85 9e fe ff ff    	jne    7a8 <change_protection+0x2b8>
 90a:	48 81 45 88 00 02 00 	addq   $0x200,-0x78(%rbp)
 911:	00
 912:	48 83 85 58 ff ff ff 	addq   $0x1,-0xa8(%rbp)
 919:	01
 91a:	e9 89 fe ff ff       	jmpq   7a8 <change_protection+0x2b8>
 91f:	90                   	nop
 920:	48 83 7d a8 00       	cmpq   $0x0,-0x58(%rbp)
 925:	4c 8b 7d d0          	mov    -0x30(%rbp),%r15
 929:	74 18                	je     943 <change_protection+0x453>
 92b:	48 8b 45 c8          	mov    -0x38(%rbp),%rax
 92f:	4c 89 fa             	mov    %r15,%rdx
 932:	48 8b 75 c0          	mov    -0x40(%rbp),%rsi
 936:	48 8b 48 50          	mov    0x50(%rax),%rcx
 93a:	48 8b 78 40          	mov    0x40(%rax),%rdi
 93e:	e8 00 00 00 00       	callq  943 <change_protection+0x453>
			93f: R_X86_64_PC32	flush_tlb_mm_range-0x4
 943:	48 8b 45 80          	mov    -0x80(%rbp),%rax
 947:	c6 80 dc 08 00 00 00 	movb   $0x0,0x8dc(%rax)
 94e:	e9 76 ff ff ff       	jmpq   8c9 <change_protection+0x3d9>
 953:	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)
 958:	4c 89 ff             	mov    %r15,%rdi
 95b:	e8 00 00 00 00       	callq  960 <change_protection+0x470>
			95c: R_X86_64_PC32	pgd_clear_bad-0x4
 960:	e9 73 fe ff ff       	jmpq   7d8 <change_protection+0x2e8>
 965:	0f 1f 00             	nopl   (%rax)
 968:	4c 89 ef             	mov    %r13,%rdi
 96b:	4c 89 55 90          	mov    %r10,-0x70(%rbp)
 96f:	e8 00 00 00 00       	callq  974 <change_protection+0x484>
			970: R_X86_64_PC32	pud_clear_bad-0x4
 974:	4c 8b 55 90          	mov    -0x70(%rbp),%r10
 978:	e9 d3 fe ff ff       	jmpq   850 <change_protection+0x360>
 97d:	0f 1f 00             	nopl   (%rax)
 980:	0f 0b                	ud2
 982:	66 0f 1f 44 00 00    	nopw   0x0(%rax,%rax,1)
 988:	48 89 da             	mov    %rbx,%rdx
 98b:	4c 89 f6             	mov    %r14,%rsi
 98e:	48 89 c7             	mov    %rax,%rdi
 991:	e8 00 00 00 00       	callq  996 <change_protection+0x4a6>
			992: R_X86_64_PC32	__mmu_notifier_invalidate_range_start-0x4
 996:	e9 99 fd ff ff       	jmpq   734 <change_protection+0x244>
 99b:	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)
 9a0:	0f 0b                	ud2
 9a2:	66 0f 1f 44 00 00    	nopw   0x0(%rax,%rax,1)
 9a8:	48 8b 7d c8          	mov    -0x38(%rbp),%rdi
 9ac:	4c 89 e2             	mov    %r12,%rdx
 9af:	4c 89 f6             	mov    %r14,%rsi
 9b2:	e8 00 00 00 00       	callq  9b7 <change_protection+0x4c7>
			9b3: R_X86_64_PC32	__split_huge_page_pmd-0x4
 9b7:	e9 c8 fd ff ff       	jmpq   784 <change_protection+0x294>
 9bc:	0f 1f 40 00          	nopl   0x0(%rax)
 9c0:	0f 0b                	ud2

9c2: 66 66 66 66 66 2e 0f data32 data32 data32 data32 nopw %cs:0x0(%rax,%rax,1)
9c9: 1f 84 00 00 00 00 00

Quoted 10 lines

I've been rather assuming that the 9d340902 seen in many of the registers in that Aug26 dump is the pte val in question: that's SOFT_DIRTY|PROTNONE|RW.

I think RW on PROTNONE is unusual but not impossible (migration entry replacement racing with mprotect setting PROT_NONE, after it's updated vm_page_prot, before it's reached the page table). But exciting though that line of thought is, I cannot actually bring it to a pte_mknuma bug, or any bug at all.

Quoted 6 lines

Mel, no way can it be the cause of this bug - unless Sasha's later traces actually show a different stack - but I don't see the call to change_prot_numa() from queue_pages_range() sharing the same avoidance of PROT_NONE that task_numa_work() has (though it does have an outdated comment about PROT_NONE which should be removed). So I think that site probably does need PROT_NONE checking added.

I've spotted a new trace in overnight fuzzing, it could be related to this issue:

[ 3494.324839] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3494.332153] Dumping ftrace buffer:
[ 3494.332153]    (ftrace buffer empty)
[ 3494.332153] Modules linked in:
[ 3494.332153] CPU: 8 PID: 2727 Comm: trinity-c929 Not tainted 3.17.0-rc4-next-20140909-sasha-00032-gc16d47b #1135
[ 3494.332153] task: ffff88047e52b000 ti: ffff8804d491c000 task.ti: ffff8804d491c000
[ 3494.332153] RIP: task_numa_work (include/linux/mempolicy.h:177 kernel/sched/fair.c:1956)
[ 3494.332153] RSP: 0000:ffff8804d491feb8  EFLAGS: 00010206
[ 3494.332153] RAX: 0000000000000000 RBX: ffff8804bf4e8000 RCX: 000000000000e8e8
[ 3494.343974] RDX: 000000000000000a RSI: 0000000000000000 RDI: ffff8804bd6d4da8
[ 3494.343974] RBP: ffff8804d491fef8 R08: ffff8804bf4e84c8 R09: 0000000000000000
[ 3494.343974] R10: 00007f53e443c000 R11: 0000000000000001 R12: 00007f53e443c000
[ 3494.343974] R13: 000000000000dc51 R14: 006f732e61727478 R15: ffff88047e52b000
[ 3494.343974] FS:  00007f53e463f700(0000) GS:ffff880277e00000(0000) knlGS:0000000000000000
[ 3494.343974] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3494.369895] CR2: 0000000001670fa8 CR3: 0000000283562000 CR4: 00000000000006a0
[ 3494.369895] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3494.369895] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 3494.380081] Stack:
[ 3494.380081]  ffff8804bf4e80a8 0000000000000014 00007f53e4437000 0000000000000000
[ 3494.380081]  ffffffff9b976e70 ffff88047e52bbd8 ffff88047e52b000 0000000000000000
[ 3494.380081]  ffff8804d491ff28 ffffffff95193d84 0000000000000002 ffff8804d491ff58
[ 3494.380081] Call Trace:
[ 3494.380081] task_work_run (kernel/task_work.c:125 (discriminator 1))
[ 3494.380081] do_notify_resume (include/linux/tracehook.h:190 arch/x86/kernel/signal.c:758)
[ 3494.380081] retint_signal (arch/x86/kernel/entry_64.S:918)
[ 3494.380081] Code: e8 1e e5 01 00 48 89 df 4c 89 e6 e8 a3 2d 13 00 49 89 c6 48 85 c0 0f 84 07 02 00 00 48 c7 45 c8 00 00 00 00 0f 1f 80 00 00 00 00 <49> f7 46 50 00 44 00 00 0f 85 42 01 00 00 49 8b 86 a0 00 00 00
All code
========
   0:	e8 1e e5 01 00       	callq  0x1e523
   5:	48 89 df             	mov    %rbx,%rdi
   8:	4c 89 e6             	mov    %r12,%rsi
   b:	e8 a3 2d 13 00       	callq  0x132db3
  10:	49 89 c6             	mov    %rax,%r14
  13:	48 85 c0             	test   %rax,%rax
  16:	0f 84 07 02 00 00    	je     0x223
  1c:	48 c7 45 c8 00 00 00 	movq   $0x0,-0x38(%rbp)
  23:	00
  24:	0f 1f 80 00 00 00 00 	nopl   0x0(%rax)
  2b:*	49 f7 46 50 00 44 00 	testq  $0x4400,0x50(%r14)		<-- trapping instruction
  32:	00
  33:	0f 85 42 01 00 00    	jne    0x17b
  39:	49 8b 86 a0 00 00 00 	mov    0xa0(%r14),%rax
	...

Code starting with the faulting instruction
===========================================
0: 49 f7 46 50 00 44 00 testq $0x4400,0x50(%r14)
7: 00
8: 0f 85 42 01 00 00 jne 0x150
e: 49 8b 86 a0 00 00 00 mov 0xa0(%r14),%rax

	...
[ 3494.380081] RIP task_numa_work (include/linux/mempolicy.h:177 kernel/sched/fair.c:1956)
[ 3494.380081]  RSP <ffff8804d491feb8>

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#33 lore raw
Quoted 23 lines · Sasha Levin

<SNIP, haven't digested the rest>

I've spotted a new trace in overnight fuzzing, it could be related to this issue:

[ 3494.324839] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3494.332153] Dumping ftrace buffer:
[ 3494.332153]    (ftrace buffer empty)
[ 3494.332153] Modules linked in:
[ 3494.332153] CPU: 8 PID: 2727 Comm: trinity-c929 Not tainted 3.17.0-rc4-next-20140909-sasha-00032-gc16d47b #1135
[ 3494.332153] task: ffff88047e52b000 ti: ffff8804d491c000 task.ti: ffff8804d491c000
[ 3494.332153] RIP: task_numa_work (include/linux/mempolicy.h:177 kernel/sched/fair.c:1956)
[ 3494.332153] RSP: 0000:ffff8804d491feb8  EFLAGS: 00010206
[ 3494.332153] RAX: 0000000000000000 RBX: ffff8804bf4e8000 RCX: 000000000000e8e8
[ 3494.343974] RDX: 000000000000000a RSI: 0000000000000000 RDI: ffff8804bd6d4da8
[ 3494.343974] RBP: ffff8804d491fef8 R08: ffff8804bf4e84c8 R09: 0000000000000000
[ 3494.343974] R10: 00007f53e443c000 R11: 0000000000000001 R12: 00007f53e443c000
[ 3494.343974] R13: 000000000000dc51 R14: 006f732e61727478 R15: ffff88047e52b000
[ 3494.343974] FS:  00007f53e463f700(0000) GS:ffff880277e00000(0000) knlGS:0000000000000000
[ 3494.343974] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3494.369895] CR2: 0000000001670fa8 CR3: 0000000283562000 CR4: 00000000000006a0
[ 3494.369895] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3494.369895] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 3494.380081] Stack:
Quoted 8 lines
[ 3494.380081]  ffff8804bf4e80a8 0000000000000014 00007f53e4437000 0000000000000000
[ 3494.380081]  ffffffff9b976e70 ffff88047e52bbd8 ffff88047e52b000 0000000000000000
[ 3494.380081]  ffff8804d491ff28 ffffffff95193d84 0000000000000002 ffff8804d491ff58
[ 3494.380081] Call Trace:
[ 3494.380081] task_work_run (kernel/task_work.c:125 (discriminator 1))
[ 3494.380081] do_notify_resume (include/linux/tracehook.h:190 arch/x86/kernel/signal.c:758)
[ 3494.380081] retint_signal (arch/x86/kernel/entry_64.S:918)
[ 3494.380081] Code: e8 1e e5 01 00 48 89 df 4c 89 e6 e8 a3 2d 13 00 49 89 c6 48 85 c0 0f 84 07 02 00 00 48 c7 45 c8 00 00 00 00 0f 1f 80 00 00 00 00 <49> f7 46 50 00 44 00 00 0f 85 42 01 00 00 49 8b 86 a0 00 00 00

Shot in dark, can you test this please? Pagetable teardown can schedule and I'm wondering if we are trying to add hinting faults to an address space that is in the process of going away. The TASK_DEAD check is bogus so replacing it.

kernel/sched/fair.c +1 -1
index 7ea6006..007fc1c 100644
@@ -1810,7 +1810,7 @@ void task_numa_fault(int last_cpupid, int mem_node, int pages, int flags)
 		return;
 
 	/* Do not worry about placement if exiting */
-	if (p->state == TASK_DEAD)
+	if (p->flags & PF_EXITING)
 		return;
 
 	/* Allocate buffer to track faults on a per-node basis */

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#34 lore raw
Quoted 33 lines · Mel Gorman
Quoted 23 lines · Sasha Levin

<SNIP, haven't digested the rest>

I've spotted a new trace in overnight fuzzing, it could be related to this issue:

[ 3494.324839] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3494.332153] Dumping ftrace buffer:
[ 3494.332153]    (ftrace buffer empty)
[ 3494.332153] Modules linked in:
[ 3494.332153] CPU: 8 PID: 2727 Comm: trinity-c929 Not tainted 3.17.0-rc4-next-20140909-sasha-00032-gc16d47b #1135
[ 3494.332153] task: ffff88047e52b000 ti: ffff8804d491c000 task.ti: ffff8804d491c000
[ 3494.332153] RIP: task_numa_work (include/linux/mempolicy.h:177 kernel/sched/fair.c:1956)
[ 3494.332153] RSP: 0000:ffff8804d491feb8  EFLAGS: 00010206
[ 3494.332153] RAX: 0000000000000000 RBX: ffff8804bf4e8000 RCX: 000000000000e8e8
[ 3494.343974] RDX: 000000000000000a RSI: 0000000000000000 RDI: ffff8804bd6d4da8
[ 3494.343974] RBP: ffff8804d491fef8 R08: ffff8804bf4e84c8 R09: 0000000000000000
[ 3494.343974] R10: 00007f53e443c000 R11: 0000000000000001 R12: 00007f53e443c000
[ 3494.343974] R13: 000000000000dc51 R14: 006f732e61727478 R15: ffff88047e52b000
[ 3494.343974] FS:  00007f53e463f700(0000) GS:ffff880277e00000(0000) knlGS:0000000000000000
[ 3494.343974] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3494.369895] CR2: 0000000001670fa8 CR3: 0000000283562000 CR4: 00000000000006a0
[ 3494.369895] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3494.369895] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
[ 3494.380081] Stack:
Quoted 8 lines
[ 3494.380081]  ffff8804bf4e80a8 0000000000000014 00007f53e4437000 0000000000000000
[ 3494.380081]  ffffffff9b976e70 ffff88047e52bbd8 ffff88047e52b000 0000000000000000
[ 3494.380081]  ffff8804d491ff28 ffffffff95193d84 0000000000000002 ffff8804d491ff58
[ 3494.380081] Call Trace:
[ 3494.380081] task_work_run (kernel/task_work.c:125 (discriminator 1))
[ 3494.380081] do_notify_resume (include/linux/tracehook.h:190 arch/x86/kernel/signal.c:758)
[ 3494.380081] retint_signal (arch/x86/kernel/entry_64.S:918)
[ 3494.380081] Code: e8 1e e5 01 00 48 89 df 4c 89 e6 e8 a3 2d 13 00 49 89 c6 48 85 c0 0f 84 07 02 00 00 48 c7 45 c8 00 00 00 00 0f 1f 80 00 00 00 00 <49> f7 46 50 00 44 00 00 0f 85 42 01 00 00 49 8b 86 a0 00 00 00
Quoted 4 lines

Shot in dark, can you test this please? Pagetable teardown can schedule and I'm wondering if we are trying to add hinting faults to an address space that is in the process of going away. The TASK_DEAD check is bogus so replacing it.

Mel, I ran today's -next with both of your patches, but the issue still remains:

[ 3114.540976] kernel BUG at include/asm-generic/pgtable.h:724!
[ 3114.541857] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3114.543112] Dumping ftrace buffer:
[ 3114.544056]    (ftrace buffer empty)
[ 3114.545000] Modules linked in:
[ 3114.545717] CPU: 18 PID: 30217 Comm: trinity-c617 Tainted: G        W      3.17.0-rc4-next-20140910-sasha-00032-g6825fb5-dirty #1137
[ 3114.548058] task: ffff880415050000 ti: ffff88076f584000 task.ti: ffff88076f584000
[ 3114.549284] RIP: 0010:[<ffffffff952e527a>]  [<ffffffff952e527a>] change_pte_range+0x4ea/0x4f0
[ 3114.550028] RSP: 0000:ffff88076f587d68  EFLAGS: 00010246
[ 3114.550028] RAX: 0000000314625900 RBX: 0000000041218000 RCX: 0000000000000100
[ 3114.550028] RDX: 0000000314625900 RSI: 0000000041218000 RDI: 0000000314625900
[ 3114.550028] RBP: ffff88076f587dc8 R08: ffff8802cf973600 R09: 0000000000b50000
[ 3114.550028] R10: 0000000000032c01 R11: 0000000000000008 R12: ffff8802a81070c0
[ 3114.550028] R13: 8000000000000025 R14: 0000000041343000 R15: ffffc00000000fff
[ 3114.550028] FS:  00007fabb91c8700(0000) GS:ffff88025ec00000(0000) knlGS:0000000000000000
[ 3114.550028] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3114.550028] CR2: 00007fffdb7678e8 CR3: 0000000713935000 CR4: 00000000000006a0
[ 3114.550028] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3114.550028] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000050602
[ 3114.550028] Stack:
[ 3114.550028]  0000000000000001 0000000314625900 0000000000000018 ffff8802685f2260
[ 3114.550028]  0000000016840000 ffff8802cf973600 ffff880616840000 0000000041343000
[ 3114.550028]  ffff880108805048 0000000041005000 0000000041200000 0000000041343000
[ 3114.550028] Call Trace:
[ 3114.550028]  [<ffffffff952e5534>] change_protection+0x2b4/0x4e0
[ 3114.550028]  [<ffffffff952ff24b>] change_prot_numa+0x1b/0x40
[ 3114.550028]  [<ffffffff951adf16>] task_numa_work+0x1f6/0x330
[ 3114.550028]  [<ffffffff95193de4>] task_work_run+0xc4/0xf0
[ 3114.550028]  [<ffffffff95071477>] do_notify_resume+0x97/0xb0
[ 3114.550028]  [<ffffffff9850f06a>] int_signal+0x12/0x17
[ 3114.550028] Code: 66 90 48 8b 7d b8 e8 e6 88 22 03 48 8b 45 b0 e9 6f ff ff ff 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b <0f> 0b 0f 0b 0f 0b 66 66 66 66 90 55 48 89 e5 41 57 49 89 d7 41
[ 3114.550028] RIP  [<ffffffff952e527a>] change_pte_range+0x4ea/0x4f0
[ 3114.550028]  RSP <ffff88076f587d68>

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#35 lore raw
In reply to Sasha Levin
Quoted 8 lines · Sasha Levin
Quoted 3 lines · Hugh Dickins

Sasha, you say you're getting plenty of these now, but I've only seen the dump for one of them, on Aug26: please post a few more dumps, so that we can look for commonality.

I wasn't saving older logs for this issue so I only have 2 traces from tonight. If that's not enough please let me know and I'll try to add a few more.

Thanks, these two are useful, mainly because the register contents most likely to be ptes are in both of these ...900, with no sign of a ...902.

So the RW bit I got excited about yesterday is clearly not necessary for the bug (though it's still possible that it was good for implicating page migration, and page migration still play a part in the story).

Quoted 7 lines
Quoted 4 lines

And please attach a disassembly of change_protection_range() (noting which of the dumps it corresponds to, in case it has changed around):
"Code" just shows a cluster of ud2s for the unlikely bugs at end of the function, we cannot tell at all what should be in the registers by then.

change_protection_range() got inlined into change_protection(), it applies to both traces above:

Thanks for supplying, but the change in inlining means that change_protection_range() and change_protection() are no longer relevant for these traces, we now need to see change_pte_range() instead, to confirm that what I expect are ptes are indeed ptes.

If you can include line numbers (objdump -ld) in the disassembly, so much the better, but should be decipherable without. (Or objdump -Sd for source, but I often find that harder to unscramble, can't say why.)

Thanks,
Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#36 lore raw
Quoted 8 lines · Hugh Dickins

Thanks for supplying, but the change in inlining means that change_protection_range() and change_protection() are no longer relevant for these traces, we now need to see change_pte_range() instead, to confirm that what I expect are ptes are indeed ptes.

If you can include line numbers (objdump -ld) in the disassembly, so much the better, but should be decipherable without. (Or objdump -Sd for source, but I often find that harder to unscramble, can't say why.)

Here it is. Note that the source includes both of Mel's debug patches. For reference, here's one trace of the issue with those patches:

[ 3114.540976] kernel BUG at include/asm-generic/pgtable.h:724!
[ 3114.541857] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3114.543112] Dumping ftrace buffer:
[ 3114.544056]    (ftrace buffer empty)
[ 3114.545000] Modules linked in:
[ 3114.545717] CPU: 18 PID: 30217 Comm: trinity-c617 Tainted: G        W      3.17.0-rc4-next-20140910-sasha-00032-g6825fb5-dirty #1137
[ 3114.548058] task: ffff880415050000 ti: ffff88076f584000 task.ti: ffff88076f584000
[ 3114.549284] RIP: 0010:[<ffffffff952e527a>]  [<ffffffff952e527a>] change_pte_range+0x4ea/0x4f0
[ 3114.550028] RSP: 0000:ffff88076f587d68  EFLAGS: 00010246
[ 3114.550028] RAX: 0000000314625900 RBX: 0000000041218000 RCX: 0000000000000100
[ 3114.550028] RDX: 0000000314625900 RSI: 0000000041218000 RDI: 0000000314625900
[ 3114.550028] RBP: ffff88076f587dc8 R08: ffff8802cf973600 R09: 0000000000b50000
[ 3114.550028] R10: 0000000000032c01 R11: 0000000000000008 R12: ffff8802a81070c0
[ 3114.550028] R13: 8000000000000025 R14: 0000000041343000 R15: ffffc00000000fff
[ 3114.550028] FS:  00007fabb91c8700(0000) GS:ffff88025ec00000(0000) knlGS:0000000000000000
[ 3114.550028] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3114.550028] CR2: 00007fffdb7678e8 CR3: 0000000713935000 CR4: 00000000000006a0
[ 3114.550028] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3114.550028] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000050602
[ 3114.550028] Stack:
[ 3114.550028]  0000000000000001 0000000314625900 0000000000000018 ffff8802685f2260
[ 3114.550028]  0000000016840000 ffff8802cf973600 ffff880616840000 0000000041343000
[ 3114.550028]  ffff880108805048 0000000041005000 0000000041200000 0000000041343000
[ 3114.550028] Call Trace:
[ 3114.550028]  [<ffffffff952e5534>] change_protection+0x2b4/0x4e0
[ 3114.550028]  [<ffffffff952ff24b>] change_prot_numa+0x1b/0x40
[ 3114.550028]  [<ffffffff951adf16>] task_numa_work+0x1f6/0x330
[ 3114.550028]  [<ffffffff95193de4>] task_work_run+0xc4/0xf0
[ 3114.550028]  [<ffffffff95071477>] do_notify_resume+0x97/0xb0
[ 3114.550028]  [<ffffffff9850f06a>] int_signal+0x12/0x17
[ 3114.550028] Code: 66 90 48 8b 7d b8 e8 e6 88 22 03 48 8b 45 b0 e9 6f ff ff ff 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b <0f> 0b 0f 0b 0f 0b 66 66 66 66 90 55 48 89 e5 41 57 49 89 d7 41
[ 3114.550028] RIP  [<ffffffff952e527a>] change_pte_range+0x4ea/0x4f0
[ 3114.550028]  RSP <ffff88076f587d68>

And the disassembly:

0000000000000000 <change_pte_range>:
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:70
0: e8 00 00 00 00 callq 5 <change_pte_range+0x5>

			1: R_X86_64_PC32	__fentry__-0x4
   5:	55                   	push   %rbp
   6:	48 89 e5             	mov    %rsp,%rbp
   9:	41 57                	push   %r15
   b:	41 56                	push   %r14
   d:	49 89 ce             	mov    %rcx,%r14
  10:	41 55                	push   %r13
  12:	4d 89 c5             	mov    %r8,%r13
  15:	41 54                	push   %r12
  17:	49 89 f4             	mov    %rsi,%r12
  1a:	53                   	push   %rbx
  1b:	48 89 d3             	mov    %rdx,%rbx
  1e:	48 83 ec 38          	sub    $0x38,%rsp

/home/sasha/linux-next/mm/mprotect.c:71
22: 48 8b 47 40 mov 0x40(%rdi),%rax
/home/sasha/linux-next/mm/mprotect.c:70
26: 48 89 7d c8 mov %rdi,-0x38(%rbp)
lock_pte_protection():
/home/sasha/linux-next/mm/mprotect.c:53
2a: 8b 4d 10 mov 0x10(%rbp),%ecx
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:70
2d: 44 89 4d c4 mov %r9d,-0x3c(%rbp)
/home/sasha/linux-next/mm/mprotect.c:71
31: 48 89 45 d0 mov %rax,-0x30(%rbp)
lock_pte_protection():
/home/sasha/linux-next/mm/mprotect.c:53

  35:	85 c9                	test   %ecx,%ecx
  37:	0f 84 6b 03 00 00    	je     3a8 <change_pte_range+0x3a8>
pmd_to_page():
/home/sasha/linux-next/include/linux/mm.h:1538
  3d:	48 89 f7             	mov    %rsi,%rdi
  40:	48 81 e7 00 f0 ff ff 	and    $0xfffffffffffff000,%rdi
  47:	e8 00 00 00 00       	callq  4c <change_pte_range+0x4c>
			48: R_X86_64_PC32	__phys_addr-0x4

4c: 48 ba 00 00 00 00 00 movabs $0xffffea0000000000,%rdx
53: ea ff ff
56: 48 c1 e8 0c shr $0xc,%rax
spin_lock():
/home/sasha/linux-next/include/linux/spinlock.h:309

  5a:	48 89 55 b8          	mov    %rdx,-0x48(%rbp)
  5e:	48 c1 e0 06          	shl    $0x6,%rax
  62:	4c 8b 7c 10 30       	mov    0x30(%rax,%rdx,1),%r15
  67:	4c 89 ff             	mov    %r15,%rdi
  6a:	e8 00 00 00 00       	callq  6f <change_pte_range+0x6f>
			6b: R_X86_64_PC32	_raw_spin_lock-0x4

6f: 49 8b 3c 24 mov (%r12),%rdi
pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
73: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 7b <change_pte_range+0x7b>
7a: 00

			76: R_X86_64_PC32	pv_mmu_ops+0x10b
  7b:	48 8b 55 b8          	mov    -0x48(%rbp),%rdx
  7f:	0f 84 ab 03 00 00    	je     430 <change_pte_range+0x430>
  85:	ff 14 25 00 00 00 00 	callq  *0x0
			88: R_X86_64_32S	pv_mmu_ops+0x110
lock_pte_protection():
/home/sasha/linux-next/mm/mprotect.c:57
  8c:	a8 80                	test   $0x80,%al
  8e:	0f 85 a4 03 00 00    	jne    438 <change_pte_range+0x438>
  94:	49 8b 3c 24          	mov    (%r12),%rdi
  98:	48 85 ff             	test   %rdi,%rdi
  9b:	0f 84 97 03 00 00    	je     438 <change_pte_range+0x438>

pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
a1: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # a9 <change_pte_range+0xa9>
a8: 00

			a4: R_X86_64_PC32	pv_mmu_ops+0x10b
  a9:	0f 84 81 03 00 00    	je     430 <change_pte_range+0x430>
  af:	ff 14 25 00 00 00 00 	callq  *0x0
			b2: R_X86_64_32S	pv_mmu_ops+0x110
  b6:	48 b9 00 f0 ff ff ff 	movabs $0x3ffffffff000,%rcx
  bd:	3f 00 00
  c0:	48 21 c8             	and    %rcx,%rax
  c3:	48 89 c7             	mov    %rax,%rdi
  c6:	48 c1 ef 06          	shr    $0x6,%rdi
  ca:	48 8b 44 3a 30       	mov    0x30(%rdx,%rdi,1),%rax
  cf:	49 8b 3c 24          	mov    (%r12),%rdi
  d3:	48 89 45 b8          	mov    %rax,-0x48(%rbp)
pte_offset_kernel():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:551
  d7:	48 89 d8             	mov    %rbx,%rax
  da:	48 c1 e8 09          	shr    $0x9,%rax
  de:	25 f8 0f 00 00       	and    $0xff8,%eax

pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
e3: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # eb <change_pte_range+0xeb>
ea: 00

			e6: R_X86_64_PC32	pv_mmu_ops+0x10b

pte_offset_kernel():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:551
eb: 48 89 c2 mov %rax,%rdx
pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
ee: 0f 84 3c 03 00 00 je 430 <change_pte_range+0x430>
f4: ff 14 25 00 00 00 00 callq *0x0

			f7: R_X86_64_32S	pv_mmu_ops+0x110

spin_lock():
/home/sasha/linux-next/include/linux/spinlock.h:309
fb: 48 8b 7d b8 mov -0x48(%rbp),%rdi
pmd_page_vaddr():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
ff: 49 89 c4 mov %rax,%r12
pte_offset_kernel():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:551
102: 48 b8 00 00 00 00 00 movabs $0xffff880000000000,%rax
109: 88 ff ff

 10c:	48 01 d0             	add    %rdx,%rax
 10f:	4c 21 e1             	and    %r12,%rcx
 112:	4c 8d 24 08          	lea    (%rax,%rcx,1),%r12
spin_lock():
/home/sasha/linux-next/include/linux/spinlock.h:309
 116:	e8 00 00 00 00       	callq  11b <change_pte_range+0x11b>
			117: R_X86_64_PC32	_raw_spin_lock-0x4
spin_unlock():
/home/sasha/linux-next/include/linux/spinlock.h:349
 11b:	4c 89 ff             	mov    %r15,%rdi
 11e:	e8 00 00 00 00       	callq  123 <change_pte_range+0x123>
			11f: R_X86_64_PC32	_raw_spin_unlock-0x4

arch_enter_lazy_mmu_mode():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:694
123: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 12b <change_pte_range+0x12b>
12a: 00

			126: R_X86_64_PC32	pv_mmu_ops+0x133
 12b:	0f 84 a7 03 00 00    	je     4d8 <change_pte_range+0x4d8>
 131:	ff 14 25 00 00 00 00 	callq  *0x0
			134: R_X86_64_32S	pv_mmu_ops+0x138

massage_pgprot():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:351
138: 4c 89 e8 mov %r13,%rax
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:74
13b: 48 c7 45 b0 00 00 00 movq $0x0,-0x50(%rbp)
142: 00
pte_present():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:460
143: 49 bf ff 0f 00 00 00 movabs $0xffffc00000000fff,%r15
14a: c0 ff ff
massage_pgprot():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:351

 14d:	83 e0 01             	and    $0x1,%eax
 150:	48 89 45 a0          	mov    %rax,-0x60(%rbp)
 154:	e9 fa 00 00 00       	jmpq   253 <change_pte_range+0x253>
 159:	0f 1f 80 00 00 00 00 	nopl   0x0(%rax)
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:87
 160:	8b 55 10             	mov    0x10(%rbp),%edx
 163:	85 d2                	test   %edx,%edx
 165:	0f 85 85 01 00 00    	jne    2f0 <change_pte_range+0x2f0>

ptep_modify_prot_start():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:490
16b: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 173 <change_pte_range+0x173>
172: 00

			16e: R_X86_64_PC32	pv_mmu_ops+0xd3
 173:	0f 84 2f 03 00 00    	je     4a8 <change_pte_range+0x4a8>
 179:	48 8b 7d d0          	mov    -0x30(%rbp),%rdi
 17d:	48 89 de             	mov    %rbx,%rsi
 180:	4c 89 e2             	mov    %r12,%rdx
 183:	ff 14 25 00 00 00 00 	callq  *0x0
			186: R_X86_64_32S	pv_mmu_ops+0xd8

change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:89
18a: 48 89 c2 mov %rax,%rdx
ptep_modify_prot_start():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:490
18d: 48 89 c7 mov %rax,%rdi
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:89

 190:	81 e2 01 03 00 00    	and    $0x301,%edx
 196:	48 81 fa 00 02 00 00 	cmp    $0x200,%rdx
 19d:	0f 84 bd 02 00 00    	je     460 <change_pte_range+0x460>

pte_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
1a3: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 1ab <change_pte_range+0x1ab>
1aa: 00

			1a6: R_X86_64_PC32	pv_mmu_ops+0xe3
 1ab:	0f 84 a7 02 00 00    	je     458 <change_pte_range+0x458>
 1b1:	ff 14 25 00 00 00 00 	callq  *0x0
			1b4: R_X86_64_32S	pv_mmu_ops+0xe8

pte_modify():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:377
1b8: 48 be 78 fa ff ff ff movabs $0x3ffffffffa78,%rsi
1bf: 3f 00 00
massage_pgprot():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:352
1c2: 4c 89 ef mov %r13,%rdi
1c5: 48 23 3d 00 00 00 00 and 0x0(%rip),%rdi # 1cc <change_pte_range+0x1cc>

			1c8: R_X86_64_PC32	__supported_pte_mask-0x4

pte_modify():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:378
1cc: 48 ba 87 05 00 00 00 movabs $0xffffc00000000587,%rdx
1d3: c0 ff ff
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:377
1d6: 48 21 f0 and %rsi,%rax
massage_pgprot():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:352

 1d9:	48 83 7d a0 00       	cmpq   $0x0,-0x60(%rbp)
 1de:	49 0f 44 fd          	cmove  %r13,%rdi
pte_modify():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:378
 1e2:	48 89 f9             	mov    %rdi,%rcx
 1e5:	48 21 d1             	and    %rdx,%rcx
 1e8:	48 09 c1             	or     %rax,%rcx

__pte():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
1eb: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 1f3 <change_pte_range+0x1f3>
1f2: 00

			1ee: R_X86_64_PC32	pv_mmu_ops+0xeb

pte_modify():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:378
1f3: 48 89 cf mov %rcx,%rdi
__pte():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
1f6: 0f 84 a4 02 00 00 je 4a0 <change_pte_range+0x4a0>
1fc: ff 14 25 00 00 00 00 callq *0x0

			1ff: R_X86_64_32S	pv_mmu_ops+0xf0
 203:	48 89 c1             	mov    %rax,%rcx
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:96
 206:	8b 45 c4             	mov    -0x3c(%rbp),%eax
 209:	85 c0                	test   %eax,%eax
 20b:	74 0e                	je     21b <change_pte_range+0x21b>
pte_set_flags():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:186 (discriminator 1)
 20d:	48 89 c8             	mov    %rcx,%rax
 210:	48 83 c8 02          	or     $0x2,%rax
 214:	f6 c1 40             	test   $0x40,%cl
 217:	48 0f 45 c8          	cmovne %rax,%rcx

ptep_modify_prot_commit():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:503
21b: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 223 <change_pte_range+0x223>
222: 00

			21e: R_X86_64_PC32	pv_mmu_ops+0xdb
 223:	0f 84 b7 02 00 00    	je     4e0 <change_pte_range+0x4e0>
 229:	48 8b 7d d0          	mov    -0x30(%rbp),%rdi
 22d:	48 89 de             	mov    %rbx,%rsi
 230:	4c 89 e2             	mov    %r12,%rdx
 233:	ff 14 25 00 00 00 00 	callq  *0x0
			236: R_X86_64_32S	pv_mmu_ops+0xe0

change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:128
23a: 48 83 45 b0 01 addq $0x1,-0x50(%rbp)
/home/sasha/linux-next/mm/mprotect.c:131

 23f:	48 81 c3 00 10 00 00 	add    $0x1000,%rbx
 246:	49 83 c4 08          	add    $0x8,%r12
 24a:	4c 39 f3             	cmp    %r14,%rbx
 24d:	0f 84 5d 02 00 00    	je     4b0 <change_pte_range+0x4b0>

/home/sasha/linux-next/mm/mprotect.c:82
253: 49 8b 0c 24 mov (%r12),%rcx
pte_present():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:460

 257:	48 89 c8             	mov    %rcx,%rax
 25a:	4c 21 f8             	and    %r15,%rax
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:83
 25d:	a9 01 03 00 00       	test   $0x301,%eax
 262:	0f 85 f8 fe ff ff    	jne    160 <change_pte_range+0x160>
/home/sasha/linux-next/mm/mprotect.c:113
 268:	a8 40                	test   $0x40,%al
 26a:	75 d3                	jne    23f <change_pte_range+0x23f>
pte_swp_soft_dirty():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:885
 26c:	a9 01 01 00 00       	test   $0x101,%eax
 271:	0f 85 71 02 00 00    	jne    4e8 <change_pte_range+0x4e8>
pte_clear_flags():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:193
 277:	48 89 ca             	mov    %rcx,%rdx
 27a:	41 89 c0             	mov    %eax,%r8d
 27d:	80 e2 7f             	and    $0x7f,%dl
 280:	41 81 e0 80 00 00 00 	and    $0x80,%r8d

287: 48 0f 45 ca cmovne %rdx,%rcx
pte_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
28b: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 293 <change_pte_range+0x293>
292: 00

			28e: R_X86_64_PC32	pv_mmu_ops+0xe3
 293:	0f 84 bf 01 00 00    	je     458 <change_pte_range+0x458>
 299:	48 89 cf             	mov    %rcx,%rdi
 29c:	ff 14 25 00 00 00 00 	callq  *0x0
			29f: R_X86_64_32S	pv_mmu_ops+0xe8
swp_entry():
/home/sasha/linux-next/include/linux/swapops.h:30
 2a3:	48 89 c1             	mov    %rax,%rcx
 2a6:	48 c1 e8 0a          	shr    $0xa,%rax
 2aa:	48 d1 e9             	shr    %rcx
 2ad:	83 e1 1f             	and    $0x1f,%ecx
 2b0:	48 c1 e1 39          	shl    $0x39,%rcx
 2b4:	48 09 c8             	or     %rcx,%rax
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:116
 2b7:	48 89 c2             	mov    %rax,%rdx
 2ba:	48 c1 ea 39          	shr    $0x39,%rdx
 2be:	48 83 fa 1f          	cmp    $0x1f,%rdx
 2c2:	0f 85 77 ff ff ff    	jne    23f <change_pte_range+0x23f>
swp_entry_to_pte():
/home/sasha/linux-next/include/linux/swapops.h:84
 2c8:	48 c1 e0 0a          	shl    $0xa,%rax
 2cc:	48 89 c1             	mov    %rax,%rcx
 2cf:	0c bc                	or     $0xbc,%al
 2d1:	48 83 c9 3c          	or     $0x3c,%rcx
 2d5:	45 85 c0             	test   %r8d,%r8d
 2d8:	48 0f 45 c8          	cmovne %rax,%rcx

set_pte_at():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:524
2dc: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 2e4 <change_pte_range+0x2e4>
2e3: 00

			2df: R_X86_64_PC32	pv_mmu_ops+0x9b
 2e4:	0f 85 a4 00 00 00    	jne    38e <change_pte_range+0x38e>
 2ea:	0f 0b                	ud2
 2ec:	0f 1f 40 00          	nopl   0x0(%rax)
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:103
 2f0:	48 8b 7d c8          	mov    -0x38(%rbp),%rdi
 2f4:	48 89 ca             	mov    %rcx,%rdx
 2f7:	48 89 de             	mov    %rbx,%rsi
 2fa:	48 89 4d a8          	mov    %rcx,-0x58(%rbp)
 2fe:	e8 00 00 00 00       	callq  303 <change_pte_range+0x303>
			2ff: R_X86_64_PC32	vm_normal_page-0x4
/home/sasha/linux-next/mm/mprotect.c:104
 303:	48 85 c0             	test   %rax,%rax
 306:	0f 84 33 ff ff ff    	je     23f <change_pte_range+0x23f>
/home/sasha/linux-next/mm/mprotect.c:104 (discriminator 1)
 30c:	48 8b 40 08          	mov    0x8(%rax),%rax
 310:	83 e0 03             	and    $0x3,%eax
 313:	48 83 f8 03          	cmp    $0x3,%rax
 317:	0f 84 22 ff ff ff    	je     23f <change_pte_range+0x23f>
/home/sasha/linux-next/mm/mprotect.c:105
 31d:	48 8b 4d a8          	mov    -0x58(%rbp),%rcx
 321:	81 e1 01 03 00 00    	and    $0x301,%ecx
 327:	48 81 f9 00 02 00 00 	cmp    $0x200,%rcx
 32e:	0f 84 0b ff ff ff    	je     23f <change_pte_range+0x23f>

pte_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
334: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 33c <change_pte_range+0x33c>
33b: 00

			337: R_X86_64_PC32	pv_mmu_ops+0xe3

ptep_set_numa():
/home/sasha/linux-next/include/asm-generic/pgtable.h:740
33c: 49 8b 3c 24 mov (%r12),%rdi
pte_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
340: 0f 84 12 01 00 00 je 458 <change_pte_range+0x458>
346: ff 14 25 00 00 00 00 callq *0x0

			349: R_X86_64_32S	pv_mmu_ops+0xe8
pte_mknuma():
/home/sasha/linux-next/include/asm-generic/pgtable.h:724
 34d:	a8 01                	test   $0x1,%al
 34f:	0f 84 95 01 00 00    	je     4ea <change_pte_range+0x4ea>
/home/sasha/linux-next/include/asm-generic/pgtable.h:727
 355:	f6 c4 01             	test   $0x1,%ah
 358:	0f 85 8e 01 00 00    	jne    4ec <change_pte_range+0x4ec>

/home/sasha/linux-next/include/asm-generic/pgtable.h:729
35e: 48 83 e0 fe and $0xfffffffffffffffe,%rax
/home/sasha/linux-next/include/asm-generic/pgtable.h:730
362: 80 cc 02 or $0x2,%ah
__pte():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
365: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 36d <change_pte_range+0x36d>
36c: 00

			368: R_X86_64_PC32	pv_mmu_ops+0xeb

pte_mknuma():
/home/sasha/linux-next/include/asm-generic/pgtable.h:730
36d: 48 89 c7 mov %rax,%rdi
__pte():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
370: 0f 84 2a 01 00 00 je 4a0 <change_pte_range+0x4a0>
376: ff 14 25 00 00 00 00 callq *0x0

			379: R_X86_64_32S	pv_mmu_ops+0xf0

set_pte_at():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:524
37d: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 385 <change_pte_range+0x385>
384: 00

			380: R_X86_64_PC32	pv_mmu_ops+0x9b

pte_mknuma():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
385: 48 89 c1 mov %rax,%rcx
set_pte_at():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:524

 388:	0f 84 5c ff ff ff    	je     2ea <change_pte_range+0x2ea>
 38e:	48 8b 7d d0          	mov    -0x30(%rbp),%rdi
 392:	48 89 de             	mov    %rbx,%rsi
 395:	4c 89 e2             	mov    %r12,%rdx
 398:	ff 14 25 00 00 00 00 	callq  *0x0
			39b: R_X86_64_32S	pv_mmu_ops+0xa0
 39f:	e9 96 fe ff ff       	jmpq   23a <change_pte_range+0x23a>
 3a4:	0f 1f 40 00          	nopl   0x0(%rax)

pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
3a8: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 3b0 <change_pte_range+0x3b0>
3af: 00

			3ab: R_X86_64_PC32	pv_mmu_ops+0x10b
 3b0:	48 8b 3e             	mov    (%rsi),%rdi
 3b3:	74 7b                	je     430 <change_pte_range+0x430>
 3b5:	ff 14 25 00 00 00 00 	callq  *0x0
			3b8: R_X86_64_32S	pv_mmu_ops+0x110
 3bc:	48 ba 00 f0 ff ff ff 	movabs $0x3ffffffff000,%rdx
 3c3:	3f 00 00
 3c6:	48 21 d0             	and    %rdx,%rax
 3c9:	48 89 c7             	mov    %rax,%rdi
 3cc:	48 b8 00 00 00 00 00 	movabs $0xffffea0000000000,%rax
 3d3:	ea ff ff
 3d6:	48 c1 ef 06          	shr    $0x6,%rdi
 3da:	48 8b 44 07 30       	mov    0x30(%rdi,%rax,1),%rax
 3df:	48 8b 3e             	mov    (%rsi),%rdi
 3e2:	48 89 45 b8          	mov    %rax,-0x48(%rbp)
pte_offset_kernel():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:551
 3e6:	48 89 d8             	mov    %rbx,%rax
 3e9:	48 c1 e8 09          	shr    $0x9,%rax
 3ed:	25 f8 0f 00 00       	and    $0xff8,%eax

pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
3f2: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 3fa <change_pte_range+0x3fa>
3f9: 00

			3f5: R_X86_64_PC32	pv_mmu_ops+0x10b

pte_offset_kernel():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:551
3fa: 48 89 c1 mov %rax,%rcx
pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
3fd: 74 31 je 430 <change_pte_range+0x430>
3ff: ff 14 25 00 00 00 00 callq *0x0

			402: R_X86_64_32S	pv_mmu_ops+0x110

spin_lock():
/home/sasha/linux-next/include/linux/spinlock.h:309
406: 48 8b 7d b8 mov -0x48(%rbp),%rdi
pmd_page_vaddr():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
40a: 49 89 c4 mov %rax,%r12
pte_offset_kernel():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:551
40d: 48 b8 00 00 00 00 00 movabs $0xffff880000000000,%rax
414: 88 ff ff

 417:	48 01 c8             	add    %rcx,%rax
 41a:	4c 21 e2             	and    %r12,%rdx
 41d:	4c 8d 24 10          	lea    (%rax,%rdx,1),%r12
spin_lock():
/home/sasha/linux-next/include/linux/spinlock.h:309
 421:	e8 00 00 00 00       	callq  426 <change_pte_range+0x426>
			422: R_X86_64_PC32	_raw_spin_lock-0x4
 426:	e9 f8 fc ff ff       	jmpq   123 <change_pte_range+0x123>
 42b:	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)

pmd_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:571
430: 0f 0b ud2
432: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
spin_unlock():
/home/sasha/linux-next/include/linux/spinlock.h:349

 438:	4c 89 ff             	mov    %r15,%rdi
 43b:	e8 00 00 00 00       	callq  440 <change_pte_range+0x440>
			43c: R_X86_64_PC32	_raw_spin_unlock-0x4

change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:78
440: 31 c0 xor %eax,%eax
/home/sasha/linux-next/mm/mprotect.c:136

 442:	48 83 c4 38          	add    $0x38,%rsp
 446:	5b                   	pop    %rbx
 447:	41 5c                	pop    %r12
 449:	41 5d                	pop    %r13
 44b:	41 5e                	pop    %r14
 44d:	41 5f                	pop    %r15
 44f:	5d                   	pop    %rbp
 450:	c3                   	retq

451: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
pte_to_swp_entry():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
458: 0f 0b ud2
45a: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
pte_val():
460: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 468 <change_pte_range+0x468>
467: 00

			463: R_X86_64_PC32	pv_mmu_ops+0xe3
 468:	74 ee                	je     458 <change_pte_range+0x458>
 46a:	48 89 c7             	mov    %rax,%rdi
 46d:	ff 14 25 00 00 00 00 	callq  *0x0
			470: R_X86_64_32S	pv_mmu_ops+0xe8

pte_mknonnuma():
/home/sasha/linux-next/include/asm-generic/pgtable.h:701
474: 80 e4 fd and $0xfd,%ah
/home/sasha/linux-next/include/asm-generic/pgtable.h:702
477: 48 83 c8 21 or $0x21,%rax
__pte():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
47b: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 483 <change_pte_range+0x483>
482: 00

			47e: R_X86_64_PC32	pv_mmu_ops+0xeb

pte_mknonnuma():
/home/sasha/linux-next/include/asm-generic/pgtable.h:702
483: 48 89 c7 mov %rax,%rdi
__pte():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:435
486: 74 18 je 4a0 <change_pte_range+0x4a0>
488: ff 14 25 00 00 00 00 callq *0x0

			48b: R_X86_64_32S	pv_mmu_ops+0xf0
 48f:	48 89 c7             	mov    %rax,%rdi
 492:	e9 0c fd ff ff       	jmpq   1a3 <change_pte_range+0x1a3>
 497:	66 0f 1f 84 00 00 00 	nopw   0x0(%rax,%rax,1)

49e: 00 00
4a0: 0f 0b ud2
4a2: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
ptep_modify_prot_start():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:490
4a8: 0f 0b ud2
4aa: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
arch_leave_lazy_mmu_mode():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:699
4b0: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 4b8 <change_pte_range+0x4b8>
4b7: 00

			4b3: R_X86_64_PC32	pv_mmu_ops+0x13b
 4b8:	74 34                	je     4ee <change_pte_range+0x4ee>
 4ba:	ff 14 25 00 00 00 00 	callq  *0x0
			4bd: R_X86_64_32S	pv_mmu_ops+0x140
spin_unlock():
/home/sasha/linux-next/include/linux/spinlock.h:349
 4c1:	48 8b 7d b8          	mov    -0x48(%rbp),%rdi
 4c5:	e8 00 00 00 00       	callq  4ca <change_pte_range+0x4ca>
			4c6: R_X86_64_PC32	_raw_spin_unlock-0x4
change_pte_range():
/home/sasha/linux-next/mm/mprotect.c:135
 4ca:	48 8b 45 b0          	mov    -0x50(%rbp),%rax
 4ce:	e9 6f ff ff ff       	jmpq   442 <change_pte_range+0x442>
 4d3:	0f 1f 44 00 00       	nopl   0x0(%rax,%rax,1)

arch_enter_lazy_mmu_mode():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:694
4d8: 0f 0b ud2
4da: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
ptep_modify_prot_commit():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:503
4e0: 0f 0b ud2
4e2: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
pte_to_swp_entry():
/home/sasha/linux-next/./arch/x86/include/asm/pgtable.h:885
4e8: 0f 0b ud2
ptep_set_numa():
/home/sasha/linux-next/include/asm-generic/pgtable.h:724
4ea: 0f 0b ud2
/home/sasha/linux-next/include/asm-generic/pgtable.h:727
4ec: 0f 0b ud2
arch_leave_lazy_mmu_mode():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:699
4ee: 0f 0b ud2

Thanks,
Sasha

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#37 lore raw
Quoted 48 lines · Sasha Levin
Quoted 8 lines · Hugh Dickins

Thanks for supplying, but the change in inlining means that change_protection_range() and change_protection() are no longer relevant for these traces, we now need to see change_pte_range() instead, to confirm that what I expect are ptes are indeed ptes.

If you can include line numbers (objdump -ld) in the disassembly, so much the better, but should be decipherable without. (Or objdump -Sd for source, but I often find that harder to unscramble, can't say why.)

Here it is. Note that the source includes both of Mel's debug patches. For reference, here's one trace of the issue with those patches:

[ 3114.540976] kernel BUG at include/asm-generic/pgtable.h:724!
[ 3114.541857] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[ 3114.543112] Dumping ftrace buffer:
[ 3114.544056]    (ftrace buffer empty)
[ 3114.545000] Modules linked in:
[ 3114.545717] CPU: 18 PID: 30217 Comm: trinity-c617 Tainted: G        W      3.17.0-rc4-next-20140910-sasha-00032-g6825fb5-dirty #1137
[ 3114.548058] task: ffff880415050000 ti: ffff88076f584000 task.ti: ffff88076f584000
[ 3114.549284] RIP: 0010:[<ffffffff952e527a>]  [<ffffffff952e527a>] change_pte_range+0x4ea/0x4f0
[ 3114.550028] RSP: 0000:ffff88076f587d68  EFLAGS: 00010246
[ 3114.550028] RAX: 0000000314625900 RBX: 0000000041218000 RCX: 0000000000000100
[ 3114.550028] RDX: 0000000314625900 RSI: 0000000041218000 RDI: 0000000314625900
[ 3114.550028] RBP: ffff88076f587dc8 R08: ffff8802cf973600 R09: 0000000000b50000
[ 3114.550028] R10: 0000000000032c01 R11: 0000000000000008 R12: ffff8802a81070c0
[ 3114.550028] R13: 8000000000000025 R14: 0000000041343000 R15: ffffc00000000fff
[ 3114.550028] FS:  00007fabb91c8700(0000) GS:ffff88025ec00000(0000) knlGS:0000000000000000
[ 3114.550028] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 3114.550028] CR2: 00007fffdb7678e8 CR3: 0000000713935000 CR4: 00000000000006a0
[ 3114.550028] DR0: 00000000006f0000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3114.550028] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000050602
[ 3114.550028] Stack:
[ 3114.550028]  0000000000000001 0000000314625900 0000000000000018 ffff8802685f2260
[ 3114.550028]  0000000016840000 ffff8802cf973600 ffff880616840000 0000000041343000
[ 3114.550028]  ffff880108805048 0000000041005000 0000000041200000 0000000041343000
[ 3114.550028] Call Trace:
[ 3114.550028]  [<ffffffff952e5534>] change_protection+0x2b4/0x4e0
[ 3114.550028]  [<ffffffff952ff24b>] change_prot_numa+0x1b/0x40
[ 3114.550028]  [<ffffffff951adf16>] task_numa_work+0x1f6/0x330
[ 3114.550028]  [<ffffffff95193de4>] task_work_run+0xc4/0xf0
[ 3114.550028]  [<ffffffff95071477>] do_notify_resume+0x97/0xb0
[ 3114.550028]  [<ffffffff9850f06a>] int_signal+0x12/0x17
[ 3114.550028] Code: 66 90 48 8b 7d b8 e8 e6 88 22 03 48 8b 45 b0 e9 6f ff ff ff 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b 66 0f 1f 44 00 00 0f 0b <0f> 0b 0f 0b 0f 0b 66 66 66 66 90 55 48 89 e5 41 57 49 89 d7 41
[ 3114.550028] RIP  [<ffffffff952e527a>] change_pte_range+0x4ea/0x4f0
[ 3114.550028]  RSP <ffff88076f587d68>

And the disassembly:

...

Quoted 22 lines

/home/sasha/linux-next/mm/mprotect.c:105

 31d:	48 8b 4d a8          	mov    -0x58(%rbp),%rcx
 321:	81 e1 01 03 00 00    	and    $0x301,%ecx
 327:	48 81 f9 00 02 00 00 	cmp    $0x200,%rcx
 32e:	0f 84 0b ff ff ff    	je     23f <change_pte_range+0x23f>

pte_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
334: 48 83 3d 00 00 00 00 cmpq $0x0,0x0(%rip) # 33c <change_pte_range+0x33c>
33b: 00

			337: R_X86_64_PC32	pv_mmu_ops+0xe3

ptep_set_numa():
/home/sasha/linux-next/include/asm-generic/pgtable.h:740
33c: 49 8b 3c 24 mov (%r12),%rdi
pte_val():
/home/sasha/linux-next/./arch/x86/include/asm/paravirt.h:450
340: 0f 84 12 01 00 00 je 458 <change_pte_range+0x458>
346: ff 14 25 00 00 00 00 callq *0x0

			349: R_X86_64_32S	pv_mmu_ops+0xe8
pte_mknuma():
/home/sasha/linux-next/include/asm-generic/pgtable.h:724
 34d:	a8 01                	test   $0x1,%al
 34f:	0f 84 95 01 00 00    	je     4ea <change_pte_range+0x4ea>

...

Quoted 3 lines

ptep_set_numa():
/home/sasha/linux-next/include/asm-generic/pgtable.h:724
4ea: 0f 0b ud2

Thanks, yes, there is enough in there to be sure that the ...900 is indeed the oldpte. I wasn't expecting that pv_mmu_ops function call, but there's no evidence that it does anything worse than just return in %rax what it's given in %rdi; and the second long on the stack is the -0x58(%rbp) from which oldpte is retrieved for !pte_numa(oldpte) at the beginning of the extract above.

Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

reviewer
#38 lore raw
In reply to Hugh Dickins
Quoted 10 lines · Hugh Dickins
Quoted 6 lines

<SNIP>

I'm attaching a preliminary pair of patches. The first which deals with ARCH_USES_NUMA_PROT_NONE and the second which is yours with a revised changelog. I'm adding Aneesh to the cc to look at the powerpc portion of the first patch.

Thanks a lot, Mel.

I am surprised by the ordering, but perhaps you meant nothing by it.

I didn't mean anything by it. It was based on the order I looked at the patches in. Revisited c46a7c817, looked at ARCH_USES_NUMA_PROT_NONE issue to see if it had any potential impact to your patch and then moved on to your patch.

Quoted 4 lines

Isn't the first one a welcome but optional cleanup, and the second one a fix that we need in 3.16-stable? Or does the fix actually depend in some unstated way upon the cleanup, in powerpc-land perhaps?

It shouldn't as powerpc can use its old helpers. I've included Aneesh in the cc just in case.

Quoted 6 lines

Aside from that, for the first patch: yes, I heartily approve of the disappearance of CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE and CONFIG_ARCH_USES_NUMA_PROT_NONE. If you wish, add

but of course it's really Aneesh and powerpc who are the test of it.

Thanks. I have a second version finished for that which I'll send once this bug is addressed.

Quoted 6 lines

One thing I did wonder, though: at first I was reassured by the VM_BUG_ON(!pte_present(pte)) you add to pte_mknuma(); but then thought it would be better as VM_BUG_ON(!(val & _PAGE_PRESENT)), being stronger
- asserting that indeed we do not put NUMA hints on PROT_NONE areas. (But I have not tested, perhaps such a VM_BUG_ON would actually fire.)

It shouldn't so I'll use the stronger test.

Sasha, if it's not too late would you mind testing this patch in isolation as a -stable candidate for 3.16 please? It worked for me including within trinity but then again I was not seeing crashes with 3.16 either so I do not consider my trinity testing to be a reliable indicator.

---8<---
x86,mm: fix pte_special versus pte_numa

Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels:
where zap_pte_range() checks page->mapping to see if PageAnon(page).

Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access.

Commit c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page.

Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c817e66 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special().

It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting.

Fixes c46a7c817e66 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels")
---
 arch/x86/include/asm/pgtable.h | 9 +++++++--
 mm/memory.c                    | 7 +++----
 2 files changed, 10 insertions(+), 6 deletions(-)
arch/x86/include/asm/pgtable.h +7 -2
index 0ec0560..aa97a07 100644
@@ -131,8 +131,13 @@ static inline int pte_exec(pte_t pte)
 
 static inline int pte_special(pte_t pte)
 {
-	return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) ==
-				 (_PAGE_PRESENT|_PAGE_SPECIAL);
+	/*
+	 * See CONFIG_NUMA_BALANCING pte_numa in include/asm-generic/pgtable.h.
+	 * On x86 we have _PAGE_BIT_NUMA == _PAGE_BIT_GLOBAL+1 ==
+	 * __PAGE_BIT_SOFTW1 == _PAGE_BIT_SPECIAL.
+	 */
+	return (pte_flags(pte) & _PAGE_SPECIAL) &&
+		(pte_flags(pte) & (_PAGE_PRESENT|_PAGE_PROTNONE));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)
mm/memory.c +3 -4
index 8b44f76..0a21f3d 100644
@@ -751,7 +751,7 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 	unsigned long pfn = pte_pfn(pte);
 
 	if (HAVE_PTE_SPECIAL) {
-		if (likely(!pte_special(pte) || pte_numa(pte)))
+		if (likely(!pte_special(pte)))
 			goto check_pfn;
 		if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
 			return NULL;
@@ -777,15 +777,14 @@ struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
 		}
 	}
 
+	if (is_zero_pfn(pfn))
+		return NULL;
 check_pfn:
 	if (unlikely(pfn > highest_memmap_pfn)) {
 		print_bad_pte(vma, addr, pte, NULL);
 		return NULL;
 	}
 
-	if (is_zero_pfn(pfn))
-		return NULL;
-
 	/*
 	 * NOTE! We still have PageReserved() pages in the page tables.
 	 * eg. VDSO mappings can cause them to exist.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#39 lore raw
In reply to Mel Gorman
Quoted 33 lines · Mel Gorman

From d0c77a2b497da46c52792ead066d461e5111a594 Mon Sep 17 00:00:00 2001
From: Mel Gorman <[email protected]>
Date: Tue, 5 Aug 2014 12:06:50 +0100
Subject: [PATCH] mm: Remove misleading ARCH_USES_NUMA_PROT_NONE

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented _PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting fault scanner. This was found to be conceptually confusing with a lot of implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE bits and shrunk the maximum possible swap size but it did not go far enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary duplication in powerpc vs the generic implementation by defining the types the core NUMA helpers expected to exist from x86 with their ppc64 equivalent. The unification for ppc64 is less than ideal because types do not exist that the "generic" code expects to. This patch works around the problem but it would be preferred if the powerpc people would look at this to see if they have opinions on what might suit them better.

---
 arch/powerpc/include/asm/pgtable.h | 55 ++++++++------------------------------
 arch/x86/Kconfig                   |  1 -
 include/asm-generic/pgtable.h      | 35 ++++++++++++------------
 init/Kconfig                       | 11 --------
 4 files changed, 29 insertions(+), 73 deletions(-)

....

Quoted 11 lines
arch/powerpc/include/asm/pgtable.h +1 -3
-
 #define pmdp_set_numa pmdp_set_numa
 static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pmd_t *pmdp)
@@ -109,16 +71,21 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*

arch/powerpc/include/asm/pgtable.h static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, · line 83

Quoted 10 lines
arch/powerpc/include/asm/pgtable.h +8 -1
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t is
+ * equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
+static inline pteval_t pte_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & PAGE_PROT_BITS;

PAGE_PROT_BITS don't get the _PAGE_NUMA and _PAGE_PRESENT. I will have to check further to find out why the mask doesn't include _PAGE_PRESENT.

arch/powerpc/include/asm/pgtable.h static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, · line 87

Quoted 6 lines
arch/powerpc/include/asm/pgtable.h +1 -2
 }
 
-#define pmd_mknuma pmd_mknuma
-static inline pmd_t pmd_mknuma(pmd_t pmd)
+static inline pteval_t pmd_flags(pte_t pte)
 {

static inline pmdval_t ?

arch/powerpc/include/asm/pgtable.h static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, · line 90

Quoted 4 lines
arch/powerpc/include/asm/pgtable.h +1 -1
-	return pte_pmd(pte_mknuma(pmd_pte(pmd)));
+	return pmd_val(pte) & PAGE_PROT_BITS;
 }
 

-aneesh

reviewer
#40 lore raw
Quoted 9 lines · Aneesh Kumar K.V
Quoted 9 lines
(quoted diff) +7 -2
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t is
+ * equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
Quoted 9 lines

Review

Quoted 4 lines
(quoted diff) +2 -1
+static inline pteval_t pte_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & PAGE_PROT_BITS;

PAGE_PROT_BITS don't get the _PAGE_NUMA and _PAGE_PRESENT. I will have to check further to find out why the mask doesn't include _PAGE_PRESENT.

Dumb of me, not sure how I managed that. For the purposes of what is required it doesn't matter what PAGE_PROT_BITS does. It is clearer if there is a mask that defines what bits are of interest to the generic helpers which is what this version attempts to do. It's not tested on powerpc at all unfortunately.

---8<---
mm: Remove misleading ARCH_USES_NUMA_PROT_NONE

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented _PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting fault scanner. This was found to be conceptually confusing with a lot of implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE bits and shrunk the maximum possible swap size but it did not go far enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary duplication in powerpc vs the generic implementation by defining the types the core NUMA helpers expected to exist from x86 with their ppc64 equivalent. This necessitated that a PTE bit mask be created that identified the bits that distinguish present from NUMA pte entries but it is expected this will only differ between arches based on _PAGE_PROTNONE. The naming for the generic helpers was taken from x86 originally but ppc64 has types that are equivalent for the purposes of the helper so they are mapped instead of duplicating code.

---
 arch/powerpc/include/asm/pgtable.h    | 57 ++++++++---------------------------
 arch/powerpc/include/asm/pte-common.h |  5 +++
 arch/x86/Kconfig                      |  1 -
 arch/x86/include/asm/pgtable_types.h  |  7 +++++
 include/asm-generic/pgtable.h         | 27 ++++++-----------
 init/Kconfig                          | 11 -------
 6 files changed, 33 insertions(+), 75 deletions(-)
arch/powerpc/include/asm/pgtable.h +12 -45
index d98c1ec..beeb09e 100644
@@ -38,10 +38,9 @@ static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK)
 static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
 
 #ifdef CONFIG_NUMA_BALANCING
-
 static inline int pte_present(pte_t pte)
 {
-	return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA);
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
 #define pte_present_nonuma pte_present_nonuma
@@ -50,37 +49,6 @@ static inline int pte_present_nonuma(pte_t pte)
 	return pte_val(pte) & (_PAGE_PRESENT);
 }
 
-#define pte_numa pte_numa
-static inline int pte_numa(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_NUMA|_PAGE_PRESENT)) == _PAGE_NUMA;
-}
-
-#define pte_mknonnuma pte_mknonnuma
-static inline pte_t pte_mknonnuma(pte_t pte)
-{
-	pte_val(pte) &= ~_PAGE_NUMA;
-	pte_val(pte) |=  _PAGE_PRESENT | _PAGE_ACCESSED;
-	return pte;
-}
-
-#define pte_mknuma pte_mknuma
-static inline pte_t pte_mknuma(pte_t pte)
-{
-	/*
-	 * We should not set _PAGE_NUMA on non present ptes. Also clear the
-	 * present bit so that hash_page will return 1 and we collect this
-	 * as numa fault.
-	 */
-	if (pte_present(pte)) {
-		pte_val(pte) |= _PAGE_NUMA;
-		pte_val(pte) &= ~_PAGE_PRESENT;
-	} else
-		VM_BUG_ON(1);
-	return pte;
-}
-
 #define ptep_set_numa ptep_set_numa
 static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pte_t *ptep)
@@ -92,12 +60,6 @@ static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_numa pmd_numa
-static inline int pmd_numa(pmd_t pmd)
-{
-	return pte_numa(pmd_pte(pmd));
-}
-
 #define pmdp_set_numa pmdp_set_numa
 static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pmd_t *pmdp)
@@ -109,16 +71,21 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t and
+ * pmd_t are equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
+static inline pteval_t ptenuma_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
-#define pmd_mknuma pmd_mknuma
-static inline pmd_t pmd_mknuma(pmd_t pmd)
+static inline pmdval_t pmdnuma_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknuma(pmd_pte(pmd)));
+	return pmd_val(pte) & _PAGE_NUMA_MASK;
 }
 
 # else
arch/powerpc/include/asm/pte-common.h +5 -0
index 8d1569c..e040c35 100644
@@ -98,6 +98,11 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 			 _PAGE_USER | _PAGE_ACCESSED | \
 			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
+#ifdef CONFIG_NUMA_BALANCING
+/* Mask of bits that distinguish present and numa ptes */
+#define _PAGE_NUMA_MASK (_PAGE_NUMA|_PAGE_PRESENT)
+#endif
+
 /*
  * We define 2 sets of base prot bits, one for basic pages (ie,
  * cacheable kernel and user pages) and one for non cacheable
arch/x86/Kconfig +0 -1
index d24887b..0a3f32b 100644
@@ -28,7 +28,6 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select ARCH_SUPPORTS_NUMA_BALANCING if X86_64
 	select ARCH_SUPPORTS_INT128 if X86_64
-	select ARCH_WANTS_PROT_NUMA_PROT_NONE
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_PCSPKR_PLATFORM
arch/x86/include/asm/pgtable_types.h +7 -0
index f216963..34ffe7e 100644
@@ -129,6 +129,13 @@
 			 _PAGE_SOFT_DIRTY | _PAGE_NUMA)
 #define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE | _PAGE_NUMA)
 
+#ifdef CONFIG_NUMA_BALANCING
+/* Set of bits that distinguishes present, prot_none and numa ptes */
+#define _PAGE_NUMA_MASK (_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)
+#define ptenuma_flags pte_flags
+#define pmdnuma_flags pmd_flags
+#endif /* CONFIG_NUMA_BALANCING */
+
 #define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)
 #define _PAGE_CACHE_WB		(0)
 #define _PAGE_CACHE_WC		(_PAGE_PWT)
include/asm-generic/pgtable.h +9 -18
index 53b2acc..196c124 100644
@@ -660,11 +660,12 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 }
 
 #ifdef CONFIG_NUMA_BALANCING
-#ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE
 /*
- * _PAGE_NUMA works identical to _PAGE_PROTNONE (it's actually the
- * same bit too). It's set only when _PAGE_PRESET is not set and it's
- * never set if _PAGE_PRESENT is set.
+ * _PAGE_NUMA distinguishes between an unmapped page table entry, an entry that
+ * is protected for PROT_NONE and a NUMA hinting fault entry. If the
+ * architecture defines __PAGE_PROTNONE then it should take that into account
+ * but those that do not can rely on the fact that the NUMA hinting scanner
+ * skips inaccessible VMAs.
  *
  * pte/pmd_present() returns true if pte/pmd_numa returns true. Page
  * fault triggers on those regions if pte/pmd_numa returns true
@@ -673,16 +674,14 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 #ifndef pte_numa
 static inline int pte_numa(pte_t pte)
 {
-	return (pte_flags(pte) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return (ptenuma_flags(pte) & _PAGE_NUMA_MASK) == _PAGE_NUMA;
 }
 #endif
 
 #ifndef pmd_numa
 static inline int pmd_numa(pmd_t pmd)
 {
-	return (pmd_flags(pmd) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return (pmdnuma_flags(pmd) & _PAGE_NUMA_MASK) == _PAGE_NUMA;
 }
 #endif
 
@@ -722,6 +721,8 @@ static inline pte_t pte_mknuma(pte_t pte)
 {
 	pteval_t val = pte_val(pte);
 
+	VM_BUG_ON(!(val & _PAGE_PRESENT));
+
 	val &= ~_PAGE_PRESENT;
 	val |= _PAGE_NUMA;
 
@@ -765,16 +766,6 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 }
 #endif
 #else
-extern int pte_numa(pte_t pte);
-extern int pmd_numa(pmd_t pmd);
-extern pte_t pte_mknonnuma(pte_t pte);
-extern pmd_t pmd_mknonnuma(pmd_t pmd);
-extern pte_t pte_mknuma(pte_t pte);
-extern pmd_t pmd_mknuma(pmd_t pmd);
-extern void ptep_set_numa(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-extern void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp);
-#endif /* CONFIG_ARCH_USES_NUMA_PROT_NONE */
-#else
 static inline int pmd_numa(pmd_t pmd)
 {
 	return 0;
init/Kconfig +0 -11
index 9d76b99..60fa415 100644
@@ -844,17 +844,6 @@ config ARCH_SUPPORTS_INT128
 config ARCH_WANT_NUMA_VARIABLE_LOCALITY
 	bool
 
-#
-# For architectures that are willing to define _PAGE_NUMA as _PAGE_PROTNONE
-config ARCH_WANTS_PROT_NUMA_PROT_NONE
-	bool
-
-config ARCH_USES_NUMA_PROT_NONE
-	bool
-	default y
-	depends on ARCH_WANTS_PROT_NUMA_PROT_NONE
-	depends on NUMA_BALANCING
-
 config NUMA_BALANCING_DEFAULT_ENABLED
 	bool "Automatically enable NUMA aware memory/task placement"
 	default y

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>

#41 lore raw
Quoted 20 lines · Mel Gorman
Quoted 9 lines · Aneesh Kumar K.V
Quoted 9 lines
arch/powerpc/include/asm/pgtable.h +7 -2
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t is
+ * equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
Quoted 9 lines

arch/powerpc/include/asm/pgtable.h static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,

Quoted 4 lines
arch/powerpc/include/asm/pgtable.h +2 -1
+static inline pteval_t pte_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & PAGE_PROT_BITS;

PAGE_PROT_BITS don't get the _PAGE_NUMA and _PAGE_PRESENT. I will have to check further to find out why the mask doesn't include _PAGE_PRESENT.

Quoted 5 lines

Dumb of me, not sure how I managed that. For the purposes of what is required it doesn't matter what PAGE_PROT_BITS does. It is clearer if there is a mask that defines what bits are of interest to the generic helpers which is what this version attempts to do. It's not tested on powerpc at all unfortunately.

Boot tested on ppc64.

# grep numa /proc/vmstat 
numa_hit 156722
numa_miss 0
numa_foreign 0
numa_interleave 6365
numa_local 153457
numa_other 3265
numa_pte_updates 169
numa_huge_pte_updates 0
numa_hint_faults 150
numa_hint_faults_local 138
numa_pages_migrated 10
Quoted 131 lines

---8<---
mm: Remove misleading ARCH_USES_NUMA_PROT_NONE

ARCH_USES_NUMA_PROT_NONE was defined for architectures that implemented _PAGE_NUMA using _PROT_NONE. This saved using an additional PTE bit and relied on the fact that PROT_NONE vmas were skipped by the NUMA hinting fault scanner. This was found to be conceptually confusing with a lot of implicit assumptions and it was asked that an alternative be found.

Commit c46a7c81 "x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels" redefined _PAGE_NUMA on x86 to be one of the swap PTE bits and shrunk the maximum possible swap size but it did not go far enough. There are no architectures that reuse _PROT_NONE as _PROT_NUMA but the relics still exist.

This patch removes ARCH_USES_NUMA_PROT_NONE and removes some unnecessary duplication in powerpc vs the generic implementation by defining the types the core NUMA helpers expected to exist from x86 with their ppc64 equivalent. This necessitated that a PTE bit mask be created that identified the bits that distinguish present from NUMA pte entries but it is expected this will only differ between arches based on _PAGE_PROTNONE. The naming for the generic helpers was taken from x86 originally but ppc64 has types that are equivalent for the purposes of the helper so they are mapped instead of duplicating code.

---
 arch/powerpc/include/asm/pgtable.h    | 57 ++++++++---------------------------
 arch/powerpc/include/asm/pte-common.h |  5 +++
 arch/x86/Kconfig                      |  1 -
 arch/x86/include/asm/pgtable_types.h  |  7 +++++
 include/asm-generic/pgtable.h         | 27 ++++++-----------
 init/Kconfig                          | 11 -------
 6 files changed, 33 insertions(+), 75 deletions(-)
arch/powerpc/include/asm/pgtable.h +12 -45
index d98c1ec..beeb09e 100644
@@ -38,10 +38,9 @@ static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK)
 static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
 
 #ifdef CONFIG_NUMA_BALANCING
-
 static inline int pte_present(pte_t pte)
 {
-	return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA);
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
 #define pte_present_nonuma pte_present_nonuma
@@ -50,37 +49,6 @@ static inline int pte_present_nonuma(pte_t pte)
 	return pte_val(pte) & (_PAGE_PRESENT);
 }
 
-#define pte_numa pte_numa
-static inline int pte_numa(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_NUMA|_PAGE_PRESENT)) == _PAGE_NUMA;
-}
-
-#define pte_mknonnuma pte_mknonnuma
-static inline pte_t pte_mknonnuma(pte_t pte)
-{
-	pte_val(pte) &= ~_PAGE_NUMA;
-	pte_val(pte) |=  _PAGE_PRESENT | _PAGE_ACCESSED;
-	return pte;
-}
-
-#define pte_mknuma pte_mknuma
-static inline pte_t pte_mknuma(pte_t pte)
-{
-	/*
-	 * We should not set _PAGE_NUMA on non present ptes. Also clear the
-	 * present bit so that hash_page will return 1 and we collect this
-	 * as numa fault.
-	 */
-	if (pte_present(pte)) {
-		pte_val(pte) |= _PAGE_NUMA;
-		pte_val(pte) &= ~_PAGE_PRESENT;
-	} else
-		VM_BUG_ON(1);
-	return pte;
-}
-
 #define ptep_set_numa ptep_set_numa
 static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pte_t *ptep)
@@ -92,12 +60,6 @@ static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_numa pmd_numa
-static inline int pmd_numa(pmd_t pmd)
-{
-	return pte_numa(pmd_pte(pmd));
-}
-
 #define pmdp_set_numa pmdp_set_numa
 static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 				 pmd_t *pmdp)
@@ -109,16 +71,21 @@ static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
 	return;
 }
 
-#define pmd_mknonnuma pmd_mknonnuma
-static inline pmd_t pmd_mknonnuma(pmd_t pmd)
+/*
+ * Generic NUMA pte helpers expect pteval_t and pmdval_t types to exist
+ * which was inherited from x86. For the purposes of powerpc pte_basic_t and
+ * pmd_t are equivalent
+ */
+#define pteval_t pte_basic_t
+#define pmdval_t pmd_t
+static inline pteval_t ptenuma_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknonnuma(pmd_pte(pmd)));
+	return pte_val(pte) & _PAGE_NUMA_MASK;
 }
 
-#define pmd_mknuma pmd_mknuma
-static inline pmd_t pmd_mknuma(pmd_t pmd)
+static inline pmdval_t pmdnuma_flags(pte_t pte)
 {
-	return pte_pmd(pte_mknuma(pmd_pte(pmd)));
+	return pmd_val(pte) & _PAGE_NUMA_MASK;
 }
 
 # else

....

Quoted 20 lines
include/asm-generic/pgtable.h +5 -4
@@ -660,11 +660,12 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 }
 
 #ifdef CONFIG_NUMA_BALANCING
-#ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE
 /*
- * _PAGE_NUMA works identical to _PAGE_PROTNONE (it's actually the
- * same bit too). It's set only when _PAGE_PRESET is not set and it's
- * never set if _PAGE_PRESENT is set.
+ * _PAGE_NUMA distinguishes between an unmapped page table entry, an entry that
+ * is protected for PROT_NONE and a NUMA hinting fault entry. If the
+ * architecture defines __PAGE_PROTNONE then it should take that into account
+ * but those that do not can rely on the fact that the NUMA hinting scanner
+ * skips inaccessible VMAs.
  *
  * pte/pmd_present() returns true if pte/pmd_numa returns true. Page
  * fault triggers on those regions if pte/pmd_numa returns true

include/asm-generic/pgtable.h static inline int pmd_trans_unstable(pmd_t *pmd) · line 678

Quoted 7 lines
include/asm-generic/pgtable.h +1 -2
@@ -673,16 +674,14 @@ static inline int pmd_trans_unstable(pmd_t *pmd)
 #ifndef pte_numa
 static inline int pte_numa(pte_t pte)
 {
-	return (pte_flags(pte) &
-		(_PAGE_NUMA|_PAGE_PROTNONE|_PAGE_PRESENT)) == _PAGE_NUMA;
+	return (ptenuma_flags(pte) & _PAGE_NUMA_MASK) == _PAGE_NUMA;
 }

Can we avoid & _PAGE_NUMA_MASK ?. I understand that you need that for x86 because you have

#define ptenuma_flags pte_flags

But on ppc64 you already have

static inline pteval_t ptenuma_flags(pte_t pte)

{
	return pte_val(pte) & _PAGE_NUMA_MASK;
}

-aneesh