fix cm-t54 serial console power supply
cover fix cm-t54 serial console power supply
Essential fix of CM-T54 serial console power supply and minor update of SBC-T54 DT model property.
Dmitry Lifshitz (2):
ARM: dts: cm-t54: fix serial console power supply.
ARM: dts: sbc-t54: fix model property
arch/arm/boot/dts/omap5-cm-t54.dts | 5 ++--- arch/arm/boot/dts/omap5-sbc-t54.dts | 4 ++-- 2 files changed, 4 insertions(+), 5 deletions(-)
Signature · 1 line
1.7.5.4
PATCH 1/2 ARM: dts: cm-t54: fix serial console power supply.
LDO8 regulator is used for act led and serial cosole power supply.
Its DT status is declared as "disabled", however the serial console was functional until Commit 318dbb02b ("regulator: palmas: Fix SMPS enable/disable/is_enabled") wich properly turns off LDO8 on boot.
Fix serial cosole power supply (and act led) on boot by turning LDO8 on.
--- arch/arm/boot/dts/omap5-cm-t54.dts | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)
arch/arm/boot/dts/omap5-cm-t54.dts +2 -3
@@ -353,13 +353,12 @@ }; ldo8_reg: ldo8 { - /* VDD_3v0: Does not go anywhere */ + /* VDD_3V_GP: act led/serial console */ regulator-name = "ldo8"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-always-on; regulator-boot-on; - /* Unused */ - status = "disabled"; }; ldo9_reg: ldo9 {
Signature · 1 line
1.7.5.4
PATCH 1/2 ARM: dts: cm-t54: fix serial console power supply.
Quoted 9 lines · Dmitry Lifshitz
LDO8 regulator is used for act led and serial cosole power supply.
Its DT status is declared as "disabled", however the serial console was functional until Commit
318dbb02b("regulator: palmas: Fix SMPS enable/disable/is_enabled") wich properly turns off LDO8 on boot.Fix serial cosole power supply (and act led) on boot by turning LDO8 on.
Signed-off-by Dmitry Lifshitz <[email protected]>
- Paul
PATCH 1/2 ARM: dts: cm-t54: fix serial console power supply.
Quoted 8 lines · Paul Walmsley
Quoted 6 lines · Dmitry Lifshitz
LDO8 regulator is used for act led and serial cosole power supply.
Its DT status is declared as "disabled", however the serial console was functional until Commit
318dbb02b("regulator: palmas: Fix SMPS enable/disable/is_enabled") wich properly turns off LDO8 on boot.
Quoted 5 lines
Quoted 3 lines
Fix serial cosole power supply (and act led) on boot by turning LDO8 on.
Signed-off-by Dmitry Lifshitz <[email protected]>Tested-by Paul Walmsley <[email protected]>
Applying this into omap-for-v3.17/fixes-v2, the second into omap-for-v3.18/dt thanks.
Tony
PATCH 2/2 ARM: dts: sbc-t54: fix model property
In reply to Dmitry LifshitzCM-T54 CoM can be used with various custom baseboards, other than SB-T54 (supplied with SBC-T54 single board computer).
Update model property of SBC-T54 DT to clarify this.
--- arch/arm/boot/dts/omap5-sbc-t54.dts | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/omap5-sbc-t54.dts +2 -2
@@ -1,11 +1,11 @@ /* - * Suppport for CompuLab SBC-T54 with CM-T54 + * Suppport for CompuLab CM-T54 on SB-T54 baseboard */ #include "omap5-cm-t54.dts" / { - model = "CompuLab SBC-T54 with CM-T54"; + model = "CompuLab CM-T54 on SB-T54"; compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; };
Signature · 1 line
1.7.5.4