Replace small drive with bigger, using LVM?
I have a workstation that can only take 2 hard drives.
The one that's in there is a 500GB drive and I'd like to bring a new 4TB drive in and use LVMto migrate a live running system over to the new drive, remove the old one from the setup, reboot and bing, have the large drive running,without having to re-install my OS and set up everything afresh. It's an Ubuntu 14.04.1 install where I ticked the "Use LVM" tick box
# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005d771
Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 976771071 488134657 5 Extended /dev/sda5 501760 976771071 488134656 8e Linux LVM
Disk /dev/sdb: 4000.8 GB, 4000787030016 bytes
255 heads, 63 sectors/track, 486401 cylinders, total 7814037168 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xc73f6184
Device Boot Start End Blocks Id System /dev/sdb1 2048 499711 248832 83 Linux /dev/sdb2 499712 4294967294 2147233791+ 5 Extended /dev/sdb5 501760 4294967294 2147232767+ 8e Linux LVM
Disk /dev/mapper/ubuntu--vg-root: 493.4 GB, 493363396608 bytes 255 heads, 63 sectors/track, 59981 cylinders, total 963600384 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/ubuntu--vg-root doesn't contain a valid partition table
Disk /dev/mapper/ubuntu--vg-swap_1: 6438 MB, 6438256640 bytes 255 heads, 63 sectors/track, 782 cylinders, total 12574720 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/ubuntu--vg-swap_1 doesn't contain a valid partition table
So /dev/sda is the original install disk and /dev/sdb in my shiny new WD Black 4TB drive.
# vgdisplay --- Volume group --- VG Name ubuntu-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 7 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 465.52 GiB PE Size 4.00 MiB Total PE 119173 Alloc PE / Size 119162 / 465.48 GiB Free PE / Size 11 / 44.00 MiB VG UUID tFSX8N-c3zG-j9BW-yqx2-Or63-AXMg-Sho5tD
root@home:~# lvdisplay --- Logical volume --- LV Path /dev/ubuntu-vg/root LV Name root VG Name ubuntu-vg LV UUID rqvzFC-b1I2-sLRm-oq6w-fTEP-UGSe-7E7fwz LV Write Access read/write LV Creation host, time ubuntu, 2014-08-15 14:24:31 +0100 LV Status available # open 1 LV Size 459.48 GiB Current LE 117627 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0
--- Logical volume ---
LV Path /dev/ubuntu-vg/swap_1 LV Name swap_1 VG Name ubuntu-vg LV UUID y9fXgx-ceMm-lss0-ZZi8-d2us-KdGT-ipUQQ4 LV Write Access read/write LV Creation host, time ubuntu, 2014-08-15 14:24:31 +0100 LV Status available # open 2 LV Size 6.00 GiB Current LE 1535 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1
So I've got /boot in a primary partition and then swap and / come via LVM in the extended.
So I'd love to do something like
* dd /dev/sda1 to /dev/sdb1 or something like that and have my /boot volume set up
* install grub into the MBR of /dev/sdb
The if I can make the right LVM setup, get / from my live system copied to the new drive, remove the old drive lv from the vg and then physically swap the HDDs round.
Can someone help me with the finer details of this or isn't it doable? TIA
-C
Ok this is such an easy bread and butter task, but its really easy to get wrong so be careful! You have 7 tasks here, you will notice not all your OS is on lvm a small part /boot is on its own partition and you need to copy that as well to get you os to boot.
I am assuming here your second disk is called sdb.
Task 1) fdisk
fdisk /dev/sdb
c
p
1
2048
499711
a
1
c
p
2
<return>
<return>
t
8e
Task 2) Copying /boot
mkfs.ext3 /dev/sdb1
mkdir /boot2
mount /dev/sdb1 /boot2
cd /boot
tar -cPpSslf - . | ( cd /boot2 ; tar -xvPpSslf -) umount /boot2
change /etc/fstab to us /dev/sda1 for how to reference /boot
Task 3) moving lvm... easy!
pvcreate /dev/sdb2
vgextend ubuntu-vg /dev/sdb2
swapoff -a
pvmove /dev/sda5 /dev/sdb2
vgreduce ubuntu-vg /dev/sda5
And now the tricky bit!
task4) Install grub on your new drive
Hopefully this is right... if not your need task 6.
grub-setup /dev/sdb
task5) Turn off your computer.
swap sda and sdb
and boot from your new drive.
check /boot is comming from the right device (/dev/sda1), if not unmount and mount it, then install a new kernel. This is the easiest way to get it to build a new initrd. Shut down your computer remove /dev/sdb (old disk)
and you should be able to boot from just your new drive... SIMPLEZ!
Task 6) If you computer does no boot.
boot the ubuntu install disk and use rescue to install the grub boot block and verify /boot is mounted and populated with data. If not ... fix.
Task 7) I have no new space. Yes you do use pvs its just unallocated,
use either lvextend or lvcreate to extend or create a new logical volume, if you extend you will then need to use resize2fs for make he filesystem bigger, personally I would create a new mount point and not use / for everything.
James
Quoted 3 lines · Craig
So I'd love to do something like
* dd/dev/sda1to/dev/sdb1or something like that and have my /boot volume set up
Use pvmove to move everything across to the new disk.
Quoted 6 lines · Joe Thornber
Quoted 3 lines · Craig
So I'd love to do something like
* dd/dev/sda1to/dev/sdb1or something like that and have my /boot volume set upUse pvmove to move everything across to the new disk.
Also note you should be using parted rather than fdisk for sdb. You'll need to enable GPT support to partition anything larger than 2Tb.
HTH
Fran
Quoted 6 lines · Fran Garcia
Also note you should be using parted rather than fdisk for sdb. You'll need to enable GPT support to partition anything larger than 2Tb.
Very good point.
James
On 10 Sep 2014 at 14:03, James Hawtin wrote:
Date sent: Wed, 10 Sep 2014 14:03:00 +0100 From: James Hawtin <[email protected]> To: LVM general discussion and development
<[email protected]>
Subject: Re: [linux-lvm] Replace small drive with bigger, using
LVM?
Send reply to: LVM general discussion and development
<[email protected]>
<mailto:[email protected]?subject=unsubscribe>
<mailto:[email protected]?subject=subscribe>
Quoted 10 lines · Fran Garcia
Quoted 6 lines
Also note you should be using parted rather than fdisk for sdb. You'll need to enable GPT support to partition anything larger than 2Tb.
Very good point.
James
Another issue that you may run into is that the grub boot menu uses the uuid of the disk for mount instead of the older /dev/sda format, so you may have to manually reset the grub.cfg or menu.lst depending on your setup.
In the past I have done clones of the smaller disk to larger, and then just created new partition for the extra space. A bit level copy will also set the uuid the same as the original disk. So, look at your current boot config file, and see if it has uuid options.
Quoted 6 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
+----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:[email protected]
mailto:[email protected]
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+----------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC@HOME CREDITS
ROSETTA 19531221.297211 | SETI 32889183.808174 ABC 16613838.513356 | EINSTEIN 32404680.703230
On Wed, 2014-09-10 at 10:02 +0100, Craig wrote:
<cut out a bunch of stuff>
Quoted 8 lines
So I've got /boot in a primary partition and then swap and / come via LVM in the extended.
So I'd love to do something like
* dd/dev/sda1to/dev/sdb1or something like that and have my /boot volume set up
* install grub into the MBR of/dev/sdb
Quoted 7 lines
The if I can make the right LVM setup, get / from my live system copied to the new drive, remove the old drive lv from the vg and then physically swap the HDDs round.
Can someone help me with the finer details of this or isn't it doable? TIA
-C
It's very much doable, but as always, the standard disclaimer applies:
back up your data etc.
As it is now, you might just as well move /boot to reside on an LV as well; a recent enough GRUB2 (meaning: not ancient) will support booting from it just fine. This way, you won't even need to partition your new disk. Of course, you're free to use an actual boot partition if you want.
to move a VG from one PV to another, you can do the following
Assuming source PV is sda2 and new disk is sdb and you don't partition it:
pvcreate /dev/sdb
vgextend volume_group /dev/sdb
pvmove volume_group /dev/sda2 /dev/sdb
vgreduce volume_group /dev/sda2 # this removes the old PV from the VG. it will only succeed if the PV is not actually in use, so it's safe.
GRUB2 supports being installed in the MBR of a disk that's an LVM2 PV.
You can keep your old disk with its boot partition and bootloader installed until you've successfully booted off the new disk, so there's little danger that you'd actually render your system completely unbootable.
Remember to update fstab etc. to reflect the new boot partition as well.
I've been told that moving data off the VG with the root volume in it on a running system may result in a deadlock due to the way the LV device is temporarily suspended during copies, leading to trouble if the copy operation requires a read from the LV. However, I've done it several times with no issues. Still, using a live USB or CD is recommended. If it does deadlock, you should just be able to reset and continue the pvmove where it left off... it's quite resilient and won't lose your data very easily.
--
Jarkko
are you sure you want to work with a 4TB storage without any kind of redundancy?
Quoted 125 lines · Craig
I have a workstation that can only take 2 hard drives.
The one that's in there is a 500GB drive and I'd like to bring a new 4TB drive in and use LVMto migrate a live running system over to the new drive, remove the old one from the setup, reboot and bing, have the large drive running,without having to re-install my OS and set up everything afresh. It's an Ubuntu 14.04.1 install where I ticked the "Use LVM" tick box# fdisk -lDisk
/dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier:0x0005d771Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 976771071 488134657 5 Extended /dev/sda5 501760 976771071 488134656 8e Linux LVMDisk
/dev/sdb: 4000.8 GB, 4000787030016 bytes
255 heads, 63 sectors/track, 486401 cylinders, total 7814037168 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier:0xc73f6184Device Boot Start End Blocks Id System /dev/sdb1 2048 499711 248832 83 Linux /dev/sdb2 499712 4294967294 2147233791+ 5 Extended /dev/sdb5 501760 4294967294 2147232767+ 8e Linux LVMDisk
/dev/mapper/ubuntu--vg-root: 493.4 GB, 493363396608 bytes 255 heads, 63 sectors/track, 59981 cylinders, total 963600384 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier:0x00000000Disk
/dev/mapper/ubuntu--vg-rootdoesn't contain a valid partition tableDisk
/dev/mapper/ubuntu--vg-swap_1: 6438 MB, 6438256640 bytes 255 heads, 63 sectors/track, 782 cylinders, total 12574720 sectors Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier:0x00000000Disk
/dev/mapper/ubuntu--vg-swap_1doesn't contain a valid partition tableSo
/dev/sdais the original install disk and/dev/sdbin my shiny new WD Black 4TB drive.# vgdisplay --- Volume group --- VG Name ubuntu-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 7 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 465.52 GiB PE Size 4.00 MiB Total PE 119173 Alloc PE / Size 119162 / 465.48 GiB Free PE / Size 11 / 44.00 MiB VG UUID tFSX8N-c3zG-j9BW-yqx2-Or63-AXMg-Sho5tDroot@home:~# lvdisplay --- Logical volume --- LV Path /dev/ubuntu-vg/root LV Name root VG Name ubuntu-vg LV UUID rqvzFC-b1I2-sLRm-oq6w-fTEP-UGSe-7E7fwz LV Write Access read/write LV Creation host, time ubuntu, 2014-08-15 14:24:31 +0100 LV Status available # open 1 LV Size 459.48 GiB Current LE 117627 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0--- Logical volume ---
LV Path /dev/ubuntu-vg/swap_1 LV Name swap_1 VG Name ubuntu-vg LV UUID y9fXgx-ceMm-lss0-ZZi8-d2us-KdGT-ipUQQ4 LV Write Access read/write LV Creation host, time ubuntu, 2014-08-15 14:24:31 +0100 LV Status available # open 2 LV Size 6.00 GiB Current LE 1535 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1So I've got /boot in a primary partition and then swap and / come via LVM in the extended.
So I'd love to do something like
* dd/dev/sda1to/dev/sdb1or something like that and have my /boot volume set up
* install grub into the MBR of/dev/sdbThe if I can make the right LVM setup, get / from my live system copied to the new drive, remove the old drive lv from the vg and then physically swap the HDDs round.
Can someone help me with the finer details of this or isn't it doable? TIA
-C_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/