rtc: bq32000: add trickle charger option, with device tree binding
BQ32000 devices have "trickle chargers". Introduce a code to enable the charger, based on device tree.
Without charger, RTC does not keep time after power off.
Signed-off-by Pavel Machek <[email protected]>
drivers/rtc/rtc-bq32k.c +65 -0
@@ -2,10 +2,14 @@* Driver for TI BQ32000 RTC. * * Copyright (C) 2009 Semihalf. +* Copyright (C) 2014 Pavel Machek <[email protected]> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. +* +* You can get hardware description at +* http://www.ti.com/lit/ds/symlink/bq32000.pdf */ #include <linux/module.h>
@@ -27,6 +31,10 @@#define BQ32K_CENT 0x40/* Century flag */ #define BQ32K_CENT_EN 0x80/* Century flag enable bit */ +#define BQ32K_CALIBRATION 0x07/* CAL_CFG1, calibration and control */ +#define BQ32K_TCH2 0x08/* Trickle charge enable */ +#define BQ32K_CFG2 0x09/* Trickle charger control */ +struct bq32k_regs {uint8_t seconds;uint8_t minutes;
@@ -122,6 +130,59 @@ static const struct rtc_class_ops bq32k_rtc_ops = { .set_time = bq32k_rtc_set_time, }; +static int trickle_charger_of_init (struct device *dev,struct device_node *node) +{ +int plen =0 ; +const uint32_t *setup; +const uint32_t *reg; +int error; +u32 ohms =0 ; + +if (of_property_read_u32 (node,"trickle-resistor-ohms" , &ohms)) +return 0 ; + +switch (ohms) { +case 180 +940 : +/* +* TCHE[3:0] == 0x05, TCH2 == 1, TCFE == 0 (charging +* over diode and 940ohm resistor) +*/ + +if (of_property_read_bool (node,"trickle-diode-disable" )) { +dev_err (dev,"diode and resistor mismatch\n" ); +return -EINVAL ; + } + reg =0x05 ; +break ; + +case 180 +20000 : +/* diode disabled */ + +if (!of_property_read_bool (node,"trickle-diode-disable" )) { +dev_err (dev,"bq32k: diode and resistor mismatch\n" ); +return -EINVAL ; + } + reg =0x25 ; +break ; + +default : +dev_err (dev,"invalid resistor value (%d)\n" , *setup); +return -EINVAL ; + } + + error =bq32k_write (dev, ®,BQ32K_CFG2 ,1 ); +if (error) +return error; + + reg =0x20 ; + error =bq32k_write (dev, ®,BQ32K_TCH2 ,1 ); +if (error) +return error; + +dev_info (dev,"Enabled trickle RTC battery charge.\n" ); +return 0 ; +} +static int bq32k_probe (struct i2c_client *client,const struct i2c_device_id *id) {
@@ -153,6 +214,10 @@ static int bq32k_probe(struct i2c_client *client,if (error)return error; +if (client && client->dev.of_node) { +trickle_charger_of_init (dev, client->dev.of_node); + } + rtc =devm_rtc_device_register (&client->dev, bq32k_driver.driver.name, &bq32k_rtc_ops,THIS_MODULE );if (IS_ERR (rtc))
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html