Skip to contentSkip to conversation

kconfig: add sanity checks for SPL configuration

PATCH New Masahiro Yamada 2 participants 2 messages Sep 10, 2014 – Sep 17, 2014

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 kconfig: add sanity checks for SPL configuration

For the SPL configuration, "make <dir>/<target>" is used. Here,
<dir> is either "spl" or "tpl"
<target> is one of "config", "menuconfig", "xconfig", etc.

This commit adds two checks:

[1] If <dir> is given an unsupported subimage, the configuration should error out like this:

  $ make qpl/menuconfig
  ***
  *** "make qpl/menuconfig" is not supported.
  ***

[2] Make sure that "CONFIG_SPL" is enabled in the ".config" before running "make spl/menuconfig. Otherwise, the SPL image is not built at all. Having "spl/.config" makes no sense. In such a case, the configuration should exit with a message:

  $ make spl/menuconfig
  ***
  *** Create ".config" with "CONFIG_SPL" enabled
  *** before "make spl/menuconfig".
  ***

---

This check was proposed by Simon in his review
before getting the Kconfig series in.

Changes in v2:
- Replace "$objdir" with "$2" in check_enabled_subimage()

 scripts/multiconfig.sh | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
scripts/multiconfig.sh +30 -0
index 49fcfad..4a8737f 100644
@@ -252,6 +252,35 @@ do_savedefconfig () {
 	IFS=$save_IFS
 }
 
+# Some sanity checks before running "make <objdir>/<target>",
+# where <objdir> should be either "spl" or "tpl".
+# Doing "make spl/menuconfig" etc. on a non-SPL board makes no sense.
+# It should be allowed only when ".config" exists and "CONFIG_SPL" is enabled.
+#
+# Usage:
+#   check_enabled_sumbimage <objdir>/<target> <objdir>
+check_enabled_subimage () {
+
+	case $2 in
+	spl|tpl) ;;
+	*)
+		echo >&2 "***"
+		echo >&2 "*** \"make $1\" is not supported."
+		echo >&2 "***"
+		exit 1
+		;;
+	esac
+	test -r "$KCONFIG_CONFIG" && get_enabled_subimages | grep -q $2 || {
+		config=CONFIG_$(echo $2 | tr '[a-z]' '[A-Z]')
+
+		echo >&2 "***"
+		echo >&2 "*** Create \"$KCONFIG_CONFIG\" with \"$config\" enabled"
+		echo >&2 "*** before \"make $1\"."
+		echo >&2 "***"
+		exit 1
+	}
+}
+
 # Usage:
 #   do_others <objdir>/<target>
 # The field "<objdir>/" is typically empy, "spl/", "tpl/" for Normal, SPL, TPL,
@@ -265,6 +294,7 @@ do_others () {
 		objdir=
 	else
 		objdir=${1%/*}
+		check_enabled_subimage $1 $objdir
 	fi
 
 	run_make_config $target $objdir
Signature · 1 line
1.9.1
#1 lore raw

PATCH v2 1/1 kconfig: add sanity checks for SPL configuration

Quoted 20 lines · Masahiro Yamada

For the SPL configuration, "make <dir>/<target>" is used. Here,
<dir> is either "spl" or "tpl"
<target> is one of "config", "menuconfig", "xconfig", etc.

This commit adds two checks:

[1] If <dir> is given an unsupported subimage, the configuration should error out like this:

  $ make qpl/menuconfig
  ***
  *** "make qpl/menuconfig" is not supported.
  ***

[2] Make sure that "CONFIG_SPL" is enabled in the ".config" before running "make spl/menuconfig. Otherwise, the SPL image is not built at all. Having "spl/.config" makes no sense. In such a case, the configuration should exit with a message:

Quoted 8 lines
  $ make spl/menuconfig
  ***
  *** Create ".config" with "CONFIG_SPL" enabled
  *** before "make spl/menuconfig".
  ***

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140916/e3eeccaa/attachment.pgp>