Skip to contentSkip to conversation

OMAP4+: Get rid of internal SRAM handling

PATCH Superseded Dave Gerlach 3 participants 7 messages Sep 10, 2014 – Sep 18, 2014

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v3 cover OMAP4+: Get rid of internal SRAM handling

v3:
Fix minor issue in last patch to check for null sram_pool if no sram phandle is given in DT.

Make all OMAP DT only platforms (am33xx, am43xx, omap4 and omap5) use drivers/misc/sram.c driver instead of the omap internal implementation for SRAM handling.

Previous discussion can be found at [1].

Regards,
Dave

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/195588.html

Rajendra Nayak (3):
ARM: AM335x: Get rid of unused sram init function
ARM: OMAP4+: Move SRAM data to DT
ARM: OMAP4+: Remove static iotable mappings for SRAM

 Documentation/devicetree/bindings/arm/omap/mpu.txt |  3 ++
 arch/arm/boot/dts/am33xx.dtsi                      |  5 ++-
 arch/arm/boot/dts/am4372.dtsi                      |  5 +++
 arch/arm/boot/dts/omap4.dtsi                       |  6 ++++
 arch/arm/boot/dts/omap5.dtsi                       |  8 ++++-
 arch/arm/configs/omap2plus_defconfig               |  1 +
 arch/arm/mach-omap2/io.c                           | 17 ----------
 arch/arm/mach-omap2/omap4-common.c                 | 22 +++++++++++-
 arch/arm/mach-omap2/sram.c                         | 39 +---------------------
 arch/arm/mach-omap2/sram.h                         |  7 ----
 10 files changed, 46 insertions(+), 67 deletions(-)
Signature · 1 line
1.9.0
#1 lore raw

PATCH v3 1/3 ARM: AM335x: Get rid of unused sram init function

From: Rajendra Nayak <[email protected]>

Remove the empty am33xx_sram_init() function.

---
 arch/arm/mach-omap2/sram.c | 7 -------
 1 file changed, 7 deletions(-)
arch/arm/mach-omap2/sram.c +0 -7
index ddf1818..5e45df0 100644
@@ -285,11 +285,6 @@ static inline int omap34xx_sram_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-static inline int am33xx_sram_init(void)
-{
-	return 0;
-}
-
 int __init omap_sram_init(void)
 {
 	omap_detect_sram();
@@ -299,8 +294,6 @@ int __init omap_sram_init(void)
 		omap242x_sram_init();
 	else if (cpu_is_omap2430())
 		omap243x_sram_init();
-	else if (soc_is_am33xx())
-		am33xx_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
 
Signature · 1 line
1.9.0
#2 lore raw

PATCH v3 2/3 ARM: OMAP4+: Move SRAM data to DT

In reply to Dave Gerlach

From: Rajendra Nayak <[email protected]>

Use drivers/misc/sram.c driver to manage SRAM on all DT only OMAP platforms (am33xx, am43xx, omap4 and omap5) instead of the existing private plat-omap/sram.c

Address and size related data is removed from mach-omap2/sram.c and now passed to drivers/misc/sram.c from DT.

Users can hence use general purpose allocator apis instead of OMAP private ones to manage and use SRAM.

---
 arch/arm/boot/dts/am33xx.dtsi        |  5 ++---
 arch/arm/boot/dts/am4372.dtsi        |  5 +++++
 arch/arm/boot/dts/omap4.dtsi         |  5 +++++
 arch/arm/boot/dts/omap5.dtsi         |  5 +++++
 arch/arm/configs/omap2plus_defconfig |  1 +
 arch/arm/mach-omap2/sram.c           | 26 +-------------------------
 arch/arm/mach-omap2/sram.h           |  1 -
 7 files changed, 19 insertions(+), 29 deletions(-)
arch/arm/boot/dts/am33xx.dtsi +2 -3
index 3a0a161..c8238c4 100644
@@ -726,9 +726,8 @@
 		};
 
 		ocmcram: ocmcram at 40300000 {
-			compatible = "ti,am3352-ocmcram";
-			reg = <0x40300000 0x10000>;
-			ti,hwmods = "ocmcram";
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x10000>; /* 64k */
 		};
 
 		wkup_m3: wkup_m3 at 44d00000 {
arch/arm/boot/dts/am4372.dtsi +5 -0
index 8689949..24531de 100644
@@ -885,6 +885,11 @@
 				clock-names = "fck";
 			};
 		};
+
+		ocmcram: ocmcram at 40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x40000>; /* 256k */
+		};
 	};
 };
 
arch/arm/boot/dts/omap4.dtsi +5 -0
index 69408b5..f584611 100644
@@ -208,6 +208,11 @@
 			};
 		};
 
+		ocmcram: ocmcram at 40304000 {
+			compatible = "mmio-sram";
+			reg = <0x40304000 0xa000>; /* 40k */
+		};
+
 		sdma: dma-controller at 4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
arch/arm/boot/dts/omap5.dtsi +5 -0
index fc8df17..d4e6976 100644
@@ -219,6 +219,11 @@
 			};
 		};
 
+		ocmcram: ocmcram at 40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x20000>; /* 128k */
+		};
+
 		sdma: dma-controller at 4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
arch/arm/configs/omap2plus_defconfig +1 -0
index f650f00..5dd120f 100644
@@ -101,6 +101,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_TSL2550=m
 CONFIG_BMP085_I2C=m
 CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_SRAM=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
arch/arm/mach-omap2/sram.c +1 -25
index 5e45df0..e5ac29d 100644
@@ -32,12 +32,6 @@
 
 #define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
 #define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA	OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA		0x40300000
 
 #define SRAM_BOOTLOADER_SZ	0x00
 
@@ -105,32 +99,14 @@ static void __init omap_detect_sram(void)
 			} else {
 				omap_sram_size = 0x8000; /* 32K */
 			}
-		} else if (cpu_is_omap44xx()) {
-			omap_sram_start = OMAP4_SRAM_PUB_PA;
-			omap_sram_size = 0xa000; /* 40K */
-		} else if (soc_is_omap54xx()) {
-			omap_sram_start = OMAP5_SRAM_PA;
-			omap_sram_size = SZ_128K; /* 128KB */
 		} else {
 			omap_sram_start = OMAP2_SRAM_PUB_PA;
 			omap_sram_size = 0x800; /* 2K */
 		}
 	} else {
-		if (soc_is_am33xx()) {
-			omap_sram_start = AM33XX_SRAM_PA;
-			omap_sram_size = 0x10000; /* 64K */
-		} else if (soc_is_am43xx()) {
-			omap_sram_start = AM33XX_SRAM_PA;
-			omap_sram_size = SZ_256K;
-		} else if (cpu_is_omap34xx()) {
+		if (cpu_is_omap34xx()) {
 			omap_sram_start = OMAP3_SRAM_PA;
 			omap_sram_size = 0x10000; /* 64K */
-		} else if (cpu_is_omap44xx()) {
-			omap_sram_start = OMAP4_SRAM_PA;
-			omap_sram_size = 0xe000; /* 56K */
-		} else if (soc_is_omap54xx()) {
-			omap_sram_start = OMAP5_SRAM_PA;
-			omap_sram_size = SZ_128K; /* 128KB */
 		} else {
 			omap_sram_start = OMAP2_SRAM_PA;
 			if (cpu_is_omap242x())
arch/arm/mach-omap2/sram.h +0 -1
index ca7277c..3f83b80 100644
@@ -80,4 +80,3 @@ static inline void omap_push_sram_idle(void) {}
 #else
 #define OMAP4_SRAM_PA		0x40300000
 #endif
-#define AM33XX_SRAM_PA		0x40300000
Signature · 1 line
1.9.0
#3 lore raw

PATCH v3 3/3 ARM: OMAP4+: Remove static iotable mappings for SRAM

In reply to Dave Gerlach

From: Rajendra Nayak <[email protected]>

In order to handle errata I688, a page of sram was reserved by doing a static iotable map. Now that we use gen_pool to manage sram, we can completely remove all of these static mappings and use gen_pool_alloc() to get the one page of sram space needed to implement errata I688. omap_bus_sync will be NOP until SRAM initialization happens.

---
v2->v3: add check for null sram_pool

 Documentation/devicetree/bindings/arm/omap/mpu.txt |  3 +++
 arch/arm/boot/dts/omap4.dtsi                       |  1 +
 arch/arm/boot/dts/omap5.dtsi                       |  3 ++-
 arch/arm/mach-omap2/io.c                           | 17 -----------------
 arch/arm/mach-omap2/omap4-common.c                 | 22 +++++++++++++++++++++-
 arch/arm/mach-omap2/sram.c                         |  6 ------
 arch/arm/mach-omap2/sram.h                         |  6 ------
 7 files changed, 27 insertions(+), 31 deletions(-)
Documentation/devicetree/bindings/arm/omap/mpu.txt +3 -0
index 83f405b..763695d 100644
@@ -10,6 +10,9 @@ Required properties:
 	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
+Optional properties:
+- sram:	Phandle to the ocmcram node
+
 Examples:
 
 - For an OMAP5 SMP system:
arch/arm/boot/dts/omap4.dtsi +1 -0
index f584611..42a2d12 100644
@@ -81,6 +81,7 @@
 		mpu {
 			compatible = "ti,omap4-mpu";
 			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
 		};
 
 		dsp {
arch/arm/boot/dts/omap5.dtsi +2 -1
index d4e6976..dff19bd 100644
@@ -104,8 +104,9 @@
 	soc {
 		compatible = "ti,omap-infra";
 		mpu {
-			compatible = "ti,omap5-mpu";
+			compatible = "ti,omap4-mpu";
 			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
 		};
 	};
 
arch/arm/mach-omap2/io.c +0 -17
index 5d0667c..a80ee95 100644
@@ -231,15 +231,6 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 		.length		= L4_PER_44XX_SIZE,
 		.type		= MT_DEVICE,
 	},
-#ifdef CONFIG_OMAP4_ERRATA_I688
-	{
-		.virtual	= OMAP4_SRAM_VA,
-		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
-		.length		= PAGE_SIZE,
-		.type		= MT_MEMORY_RW_SO,
-	},
-#endif
-
 };
 #endif
 
@@ -269,14 +260,6 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 		.length		= L4_PER_54XX_SIZE,
 		.type		= MT_DEVICE,
 	},
-#ifdef CONFIG_OMAP4_ERRATA_I688
-	{
-		.virtual	= OMAP4_SRAM_VA,
-		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
-		.length		= PAGE_SIZE,
-		.type		= MT_MEMORY_RW_SO,
-	},
-#endif
 };
 #endif
 
arch/arm/mach-omap2/omap4-common.c +21 -1
index a0fe747..16b20ce 100644
@@ -25,6 +25,7 @@
 #include <linux/irqchip/irq-crossbar.h>
 #include <linux/of_address.h>
 #include <linux/reboot.h>
+#include <linux/genalloc.h>
 
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
@@ -71,6 +72,26 @@ void omap_bus_sync(void)
 }
 EXPORT_SYMBOL(omap_bus_sync);
 
+static int __init omap4_sram_init(void)
+{
+	struct device_node *np;
+	struct gen_pool *sram_pool;
+
+	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
+	if (!np)
+		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
+			__func__);
+	sram_pool = of_get_named_gen_pool(np, "sram", 0);
+	if (!sram_pool)
+		pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
+			__func__);
+	else
+		sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
+
+	return 0;
+}
+omap_arch_initcall(omap4_sram_init);
+
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)
 {
@@ -91,7 +112,6 @@ void __init omap_barriers_init(void)
 	dram_io_desc[0].type = MT_MEMORY_RW_SO;
 	iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
 	dram_sync = (void __iomem *) dram_io_desc[0].virtual;
-	sram_sync = (void __iomem *) OMAP4_SRAM_VA;
 
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
arch/arm/mach-omap2/sram.c +0 -6
index e5ac29d..cd488b8 100644
@@ -124,12 +124,6 @@ static void __init omap2_map_sram(void)
 {
 	int cached = 1;
 
-#ifdef CONFIG_OMAP4_ERRATA_I688
-	if (cpu_is_omap44xx()) {
-		omap_sram_start += PAGE_SIZE;
-		omap_sram_size -= SZ_16K;
-	}
-#endif
 	if (cpu_is_omap34xx()) {
 		/*
 		 * SRAM must be marked as non-cached on OMAP3 since the
arch/arm/mach-omap2/sram.h +0 -6
index 3f83b80..948d3ed 100644
@@ -74,9 +74,3 @@ static inline void omap_push_sram_idle(void) {}
  */
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP3_SRAM_PA           0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA		0x40304000
-#define OMAP4_SRAM_VA		0xfe404000
-#else
-#define OMAP4_SRAM_PA		0x40300000
-#endif
Signature · 1 line
1.9.0
#4 lore raw

v3 cover OMAP4+: Get rid of internal SRAM handling

In reply to Dave Gerlach
Quoted 20 lines · Dave Gerlach

v3:
Fix minor issue in last patch to check for null sram_pool if no sram phandle is given in DT.

Make all OMAP DT only platforms (am33xx, am43xx, omap4 and omap5) use drivers/misc/sram.c driver instead of the omap internal implementation for SRAM handling.

Previous discussion can be found at [1].

Regards,
Dave

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/195588.html

Rajendra Nayak (3):
ARM: AM335x: Get rid of unused sram init function
ARM: OMAP4+: Move SRAM data to DT
ARM: OMAP4+: Remove static iotable mappings for SRAM

Quoted 12 lines
 Documentation/devicetree/bindings/arm/omap/mpu.txt |  3 ++
 arch/arm/boot/dts/am33xx.dtsi                      |  5 ++-
 arch/arm/boot/dts/am4372.dtsi                      |  5 +++
 arch/arm/boot/dts/omap4.dtsi                       |  6 ++++
 arch/arm/boot/dts/omap5.dtsi                       |  8 ++++-
 arch/arm/configs/omap2plus_defconfig               |  1 +
 arch/arm/mach-omap2/io.c                           | 17 ----------
 arch/arm/mach-omap2/omap4-common.c                 | 22 +++++++++++-
 arch/arm/mach-omap2/sram.c                         | 39 +---------------------
 arch/arm/mach-omap2/sram.h                         |  7 ----
 10 files changed, 46 insertions(+), 67 deletions(-)

Could you please provide logs for the following:
a) Low power transition tests for OMAP3,4 on all available platforms as well?
b) provide bootlogs on all omap2plus platforms to ensure we have no regressions.

Signature · 2 lines
Regards,
Nishanth Menon
#5 lore raw

v3 cover OMAP4+: Get rid of internal SRAM handling

Quoted 34 lines · Nishanth Menon
Quoted 20 lines · Dave Gerlach

v3:
Fix minor issue in last patch to check for null sram_pool if no sram phandle is given in DT.

Make all OMAP DT only platforms (am33xx, am43xx, omap4 and omap5) use drivers/misc/sram.c driver instead of the omap internal implementation for SRAM handling.

Previous discussion can be found at [1].

Regards,
Dave

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/195588.html

Rajendra Nayak (3):
ARM: AM335x: Get rid of unused sram init function
ARM: OMAP4+: Move SRAM data to DT
ARM: OMAP4+: Remove static iotable mappings for SRAM

Quoted 12 lines
 Documentation/devicetree/bindings/arm/omap/mpu.txt |  3 ++
 arch/arm/boot/dts/am33xx.dtsi                      |  5 ++-
 arch/arm/boot/dts/am4372.dtsi                      |  5 +++
 arch/arm/boot/dts/omap4.dtsi                       |  6 ++++
 arch/arm/boot/dts/omap5.dtsi                       |  8 ++++-
 arch/arm/configs/omap2plus_defconfig               |  1 +
 arch/arm/mach-omap2/io.c                           | 17 ----------
 arch/arm/mach-omap2/omap4-common.c                 | 22 +++++++++++-
 arch/arm/mach-omap2/sram.c                         | 39 +---------------------
 arch/arm/mach-omap2/sram.h                         |  7 ----
 10 files changed, 46 insertions(+), 67 deletions(-)
Quoted 6 lines

Could you please provide logs for the following:
a) Low power transition tests for OMAP3,4 on all available platforms as well?
b) provide bootlogs on all omap2plus platforms to ensure we have no regressions.

Here are logs for low power transition, all platforms passed, properly transitioned power domains with mem sleep using wakeup_timer to wake.

Low Power transition on v3.17-rc4 with patches applied, omap2plus_defconfig (OMAP3 and OMAP4):

1: BeagleBoard-XM: http://fpaste.org/133215/
2: OMAP3430-Labrador(LDP): http://fpaste.org/133225/
3: n900: http://fpaste.org/133244/
4: pandaboard-es: http://fpaste.org/133213/
5: pandaboard-vanilla: http://fpaste.org/133214/
6: sdp3430: http://fpaste.org/133246/

Boot on v3.17-rc4 with patches applied, omap2plus_defconfig:

 1: am335x-evm:  Boot PASS: http://fpaste.org/133179/
 2:  am335x-sk:  Boot PASS: http://fpaste.org/133180/
 3: am3517-evm:  Boot PASS: http://fpaste.org/133181/
 4:  am37x-evm:  Boot PASS: http://fpaste.org/133182/
 5: am43xx-epos:  Boot PASS: http://fpaste.org/133183/
 6: am43xx-gpevm:  Boot PASS: http://fpaste.org/133184/
 7: BeagleBoard-XM:  Boot PASS: http://fpaste.org/133191/
 8: beagleboard-vanilla:  Boot PASS: http://fpaste.org/133192/
 9: beaglebone-black:  Boot PASS: http://fpaste.org/133193/
10: beaglebone:  Boot PASS: http://fpaste.org/133194/
11: craneboard:  Boot PASS: http://fpaste.org/133186/
12: dra7xx-evm:  Boot PASS: http://fpaste.org/131396/

13: OMAP3430-Labrador(LDP): Boot PASS: http://fpaste.org/133206/
14: n900: Boot PASS: http://fpaste.org/133207/
15: omap5-evm: Boot PASS: http://fpaste.org/133208/
16: pandaboard-es: Boot PASS: http://fpaste.org/133187/
17: pandaboard-vanilla: Boot PASS: http://fpaste.org/133188/

18:    sdp2430:  Boot PASS: http://fpaste.org/133189/
19:    sdp3430:  Boot PASS: http://fpaste.org/133212/

TOTAL = 19 boards, Booted Boards = 19, No Boot boards = 0

Again, all pass. I have also tested with next AM335x Suspend/Resume implementation, next version will use generic sram driver to allocate for low-level assembly code, and that works fine as well.

Regards,
Dave

maintainer
#6 lore raw

v3 cover OMAP4+: Get rid of internal SRAM handling

Quoted 74 lines · Dave Gerlach
Quoted 34 lines · Nishanth Menon
Quoted 20 lines · Dave Gerlach

v3:
Fix minor issue in last patch to check for null sram_pool if no sram phandle is given in DT.

Make all OMAP DT only platforms (am33xx, am43xx, omap4 and omap5) use drivers/misc/sram.c driver instead of the omap internal implementation for SRAM handling.

Previous discussion can be found at [1].

Regards,
Dave

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-August/195588.html

Rajendra Nayak (3):
ARM: AM335x: Get rid of unused sram init function
ARM: OMAP4+: Move SRAM data to DT
ARM: OMAP4+: Remove static iotable mappings for SRAM

Quoted 12 lines
 Documentation/devicetree/bindings/arm/omap/mpu.txt |  3 ++
 arch/arm/boot/dts/am33xx.dtsi                      |  5 ++-
 arch/arm/boot/dts/am4372.dtsi                      |  5 +++
 arch/arm/boot/dts/omap4.dtsi                       |  6 ++++
 arch/arm/boot/dts/omap5.dtsi                       |  8 ++++-
 arch/arm/configs/omap2plus_defconfig               |  1 +
 arch/arm/mach-omap2/io.c                           | 17 ----------
 arch/arm/mach-omap2/omap4-common.c                 | 22 +++++++++++-
 arch/arm/mach-omap2/sram.c                         | 39 +---------------------
 arch/arm/mach-omap2/sram.h                         |  7 ----
 10 files changed, 46 insertions(+), 67 deletions(-)
Quoted 6 lines

Could you please provide logs for the following:
a) Low power transition tests for OMAP3,4 on all available platforms as well?
b) provide bootlogs on all omap2plus platforms to ensure we have no regressions.

Here are logs for low power transition, all platforms passed, properly transitioned power domains with mem sleep using wakeup_timer to wake.

Low Power transition on v3.17-rc4 with patches applied, omap2plus_defconfig (OMAP3 and OMAP4):

1: BeagleBoard-XM: http://fpaste.org/133215/
2: OMAP3430-Labrador(LDP): http://fpaste.org/133225/
3: n900: http://fpaste.org/133244/
4: pandaboard-es: http://fpaste.org/133213/
5: pandaboard-vanilla: http://fpaste.org/133214/
6: sdp3430: http://fpaste.org/133246/

Boot on v3.17-rc4 with patches applied, omap2plus_defconfig:

 1: am335x-evm:  Boot PASS: http://fpaste.org/133179/
 2:  am335x-sk:  Boot PASS: http://fpaste.org/133180/
 3: am3517-evm:  Boot PASS: http://fpaste.org/133181/
 4:  am37x-evm:  Boot PASS: http://fpaste.org/133182/
 5: am43xx-epos:  Boot PASS: http://fpaste.org/133183/
 6: am43xx-gpevm:  Boot PASS: http://fpaste.org/133184/
 7: BeagleBoard-XM:  Boot PASS: http://fpaste.org/133191/
 8: beagleboard-vanilla:  Boot PASS: http://fpaste.org/133192/
 9: beaglebone-black:  Boot PASS: http://fpaste.org/133193/
10: beaglebone:  Boot PASS: http://fpaste.org/133194/
11: craneboard:  Boot PASS: http://fpaste.org/133186/
12: dra7xx-evm:  Boot PASS: http://fpaste.org/131396/

13: OMAP3430-Labrador(LDP): Boot PASS: http://fpaste.org/133206/
14: n900: Boot PASS: http://fpaste.org/133207/
15: omap5-evm: Boot PASS: http://fpaste.org/133208/
16: pandaboard-es: Boot PASS: http://fpaste.org/133187/
17: pandaboard-vanilla: Boot PASS: http://fpaste.org/133188/

Quoted 7 lines
18:    sdp2430:  Boot PASS: http://fpaste.org/133189/
19:    sdp3430:  Boot PASS: http://fpaste.org/133212/

TOTAL = 19 boards, Booted Boards = 19, No Boot boards = 0

Again, all pass. I have also tested with next AM335x Suspend/Resume implementation, next version will use generic sram driver to allocate for low-level assembly code, and that works fine as well.

Great, thanks for doing that. Applying all into omap-for-v3.18/soc.

Regards,

Tony