Skip to contentSkip to conversation

Improvements to i.MX6 SABRESD boards support

PATCH Superseded Luca Ceresoli 2 participants 12 messages Sep 19, 2014 – Sep 22, 2014 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

Hi,

this patchset adds support to the DualLite versions of the i.MX6 SABRESD board in addition to the Quad variant that is already supported. It also documentats how to generate a bootable SD.

Patch 4 by Vincent makes it possible to boot from USB without having to manually modify the target rootfs during the build process.

Changes since v3:
- rebased on current master;
- added Vincent patch for USB boot.

Luca Ceresoli (3):
configs/freescale_imx6qsabresd: rename imx6 to imx6q configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD freescale/imx6-sabresd: document how to create a bootable SD

Vincent Stehl? (1):
imx6sabresd: boot to /init in mfgtools mode

 board/freescale/imx6sabresd/create-boot-sd.sh      | 95 ++++++++++++++++++++++
 board/freescale/imx6sabresd/readme.txt             | 67 +++++++++++++++
 ...ommon-boot-Linux-to-init-in-mfgtools-mode.patch | 36 ++++++++
 configs/freescale_imx6dlsabresd_defconfig          | 28 +++++++
 configs/freescale_imx6qsabresd_defconfig           | 28 +++++++
 configs/freescale_imx6sabresd_defconfig            | 27 ------
 6 files changed, 254 insertions(+), 27 deletions(-)
 create mode 100755 board/freescale/imx6sabresd/create-boot-sd.sh
 create mode 100644 board/freescale/imx6sabresd/readme.txt
 create mode 100644 board/freescale/imx6sabresd/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
 create mode 100644 configs/freescale_imx6dlsabresd_defconfig
 create mode 100644 configs/freescale_imx6qsabresd_defconfig
 delete mode 100644 configs/freescale_imx6sabresd_defconfig
Signature · 4 lines
Luca

-- 
1.9.1
#1 lore raw

PATCH v4 1/4 configs/freescale_imx6qsabresd: rename imx6 to imx6q

This defconfig is specific to the SABRESD board equipped with the iMX6Q SoC. Rename it for clarity in order to avoid confusion with the upcoming defconfig for the iMX6DL version.

Suggested by Gary Bisson.

Cc Gilles Talis <[email protected]>
Cc Gary Bisson <[email protected]>
Cc Vincent Stehl? <[email protected]>

---

Changes since v3:
- rebased on current master.

This patch was added in v3.

---
 configs/freescale_imx6qsabresd_defconfig | 27 +++++++++++++++++++++++++++
 configs/freescale_imx6sabresd_defconfig  | 27 ---------------------------
 2 files changed, 27 insertions(+), 27 deletions(-)
 create mode 100644 configs/freescale_imx6qsabresd_defconfig
 delete mode 100644 configs/freescale_imx6sabresd_defconfig
configs/freescale_imx6qsabresd_defconfig new file +27 -0
new file mode 100644
index 0000000..16e4d0b
@@ -0,0 +1,27 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-sabresd"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
configs/freescale_imx6sabresd_defconfig deleted +0 -27
deleted file mode 100644
index 16e4d0b..0000000
@@ -1,27 +0,0 @@
-# architecture
-BR2_arm=y
-BR2_cortex_a9=y
-
-# system
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
-
-# kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-sabresd"
-
-# filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-
-# bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mx6qsabresd"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
Signature · 1 line
1.9.1
#2 lore raw

PATCH v4 2/4 configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD

In reply to Luca Ceresoli

This is very similar to freescale_imx6qsabresd_defconfig, which supports the i.MX6Q ("Quad", quad core CPU) version of the board, except it supports the i.MX6DL (DualLite, dual core CPU) version.

The differences are in the U-boot configuration and the device tree file.

Cc Gilles Talis <[email protected]>
Cc Gary Bisson <[email protected]>
Cc Vincent Stehl? <[email protected]>

---
Changes since v3:
- rebased on current master.

Changes since v2: nothing.
Changes since v1: nothing.

---
 configs/freescale_imx6dlsabresd_defconfig | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 configs/freescale_imx6dlsabresd_defconfig
configs/freescale_imx6dlsabresd_defconfig new file +27 -0
new file mode 100644
index 0000000..4177e16
@@ -0,0 +1,27 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v7"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-sabresd"
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="mx6dlsabresd"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
Signature · 1 line
1.9.1
#3 lore raw

PATCH v4 3/4 freescale/imx6-sabresd: document how to create a bootable SD

In reply to Luca Ceresoli

Document how to create a bootable SD card for the two supported SABRESD cards:
i.MX6Q and i.MX6DL.

The SD card creation relies on an ad-hoc script.

Cc Gilles Talis <[email protected]>
Cc Gary Bisson <[email protected]>
Cc Vincent Stehl? <[email protected]>

---

Changes since v3:
- rebased on current master.

Changes since v2:
- when initially wiping the SD, also wipe the ext2 partition to prevent it from being automounted just after partitioning on desktop systems;
- readme.txt: rename freescale_imx6{,q}sabresd_defconfig to take into account the added patch that renames the defconfig.

Changes since v1:
- properly handle SD/MMC devices that don't need the "p" prefix before the partition number (reported by Vincent Stehl?);
- mention serial terminal parameters in readme.txt (suggested by Vincent Stehl?).

---
 board/freescale/imx6sabresd/create-boot-sd.sh | 95 +++++++++++++++++++++++++++
 board/freescale/imx6sabresd/readme.txt        | 67 +++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100755 board/freescale/imx6sabresd/create-boot-sd.sh
 create mode 100644 board/freescale/imx6sabresd/readme.txt
board/freescale/imx6sabresd/create-boot-sd.sh new file +95 -0
new file mode 100755
index 0000000..9930b1e
@@ -0,0 +1,95 @@
+#!/bin/sh
+
+set -u
+set -e
+
+PROGNAME=$(basename $0)
+
+usage()
+{
+    echo "Create an SD card that boots on an i.MX6DL SABRESD board."
+    echo "It is supposed to work also for the i.MX6Q SABRESD board, but"
+    echo "it this is not tested."
+    echo
+    echo "Note: all data on the the card will be completely deleted!"
+    echo "Use with care!"
+    echo "Superuser permissions may be required to write to the device."
+    echo
+    echo "Usage: ${PROGNAME} <sd_block_device>"
+    echo "Arguments:"
+    echo "  <sd_block_device>     The device to be written to"
+    echo
+    echo "Example: ${PROGNAME} /dev/mmcblk0"
+    echo
+}
+
+if [ $# -ne 1 ]; then
+    usage
+    exit 1
+fi
+
+if [ $(id -u) -ne 0 ]; then
+    echo "${PROGNAME} must be run as root"
+    exit 1
+fi
+
+DEV=${1}
+
+# The partition name prefix depends on the device name:
+# - /dev/sde -> /dev/sde1
+# - /dev/mmcblk0 -> /dev/mmcblk0p1
+if echo ${DEV}|grep -q mmcblk ; then
+    PART="p"
+else
+    PART=""
+fi
+
+PART1=${DEV}${PART}1
+PART2=${DEV}${PART}2
+
+# Unmount the partitions if mounted
+umount ${PART1} || true
+umount ${PART2} || true
+
+# First, clear the card
+dd if=/dev/zero of=${DEV} bs=1M count=20
+
+sync
+
+# Partition the card.
+# SD layout for i.MX6 boot:
+# - Bootloader at offset 1024
+# - FAT partition starting at 1MB offset, containing uImage and *.dtb
+# - ext2/3 partition formatted as ext2 or ext3, containing the root filesystem.
+sfdisk ${DEV} <<EOF
+32,480,b
+512,,L
+EOF
+
+sync
+
+# Copy the bootloader@offset 1024
+dd if=output/images/u-boot.imx of=${DEV} obs=512 seek=2
+
+# Prepare a temp dir for mounting partitions
+TMPDIR=$(mktemp -d)
+
+# FAT partition: kernel and DTBs
+mkfs.vfat ${PART1}
+mount ${PART1} ${TMPDIR}
+cp output/images/uImage ${TMPDIR}/
+cp output/images/*.dtb  ${TMPDIR}/
+sync
+umount ${TMPDIR}
+
+# ext2 partition: root filesystem
+mkfs.ext2 ${PART2}
+mount ${PART2} ${TMPDIR}
+tar -C ${TMPDIR}/ -xf output/images/rootfs.tar
+sync
+umount ${TMPDIR}
+
+# Cleanup
+rmdir ${TMPDIR}
+sync
+echo Done
board/freescale/imx6sabresd/readme.txt new file +67 -0

67 lines not on this page · raw message

Signature · 1 line
1.9.1
#4 lore raw

PATCH v4 4/4 imx6sabresd: boot to /init in mfgtools mode

In reply to Luca Ceresoli

From: Vincent Stehl? <[email protected]>

Buildroot supplies a nice /init wrapper script to use when booting from a ramdisk.

We add a patch to u-boot to tell the kernel to boot into /init (instead of /linuxrc) on i.MX6, when booting in mfgtools mode. This way we can boot a buildroot system entirely through USB.

Signed-off-by Vincent Stehl? <vincent.stehle at freescale.com
[Luca: rebase on top of iMX6DL patches and patch iMX6DL defconfig as well]
[Luca: build- and run-tested on i.MX6DL SABRESD]
Cc Gary Bisson <[email protected]>
Cc Thomas De Schampheleire <[email protected]>
Cc Gilles Talis <[email protected]>

---

The original version of this patch is here:
http://patchwork.ozlabs.org/patch/379269/

This patch was sent added to this patch series in v4, and it has been rebased and adapted to work also for i.MX6DL.

---

 ...ommon-boot-Linux-to-init-in-mfgtools-mode.patch | 36 ++++++++++++++++++++++
 configs/freescale_imx6dlsabresd_defconfig          |  1 +
 configs/freescale_imx6qsabresd_defconfig           |  1 +
 3 files changed, 38 insertions(+)
 create mode 100644 board/freescale/imx6sabresd/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
board/freescale/imx6sabresd/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch new file +36 -0
new file mode 100644
index 0000000..c01df4e
@@ -0,0 +1,36 @@
+From 4a7cd7c5b165317dccf45cfc235da3e14bc339e8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <[email protected]>
+Date: Tue, 12 Aug 2014 10:17:31 +0200
+Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Buildroot supplies a nice /init wrapper script to use when booting from a
+ramdisk.
+
+This patch tells u-boot to tell the kernel to boot into /init (instead of
+/linuxrc) on i.MX6, when booting in mfgtools mode. This way we can boot a
+buildroot system entirely through USB.
+
+Signed-off-by: Vincent Stehl? <[email protected]>
+---
+ include/configs/mx6qsabre_common.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
+index 69ff0df..ec7b665 100644
+--- a/include/configs/mx6qsabre_common.h
++++ b/include/configs/mx6qsabre_common.h
+@@ -129,7 +129,7 @@
+ 
+ #define CONFIG_MFG_ENV_SETTINGS \
+ 	"mfgtool_args=setenv bootargs console=" CONFIG_CONSOLE_DEV ",115200 " \
+-		"rdinit=/linuxrc " \
++		"rdinit=/init " \
+ 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+ 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+ 		"g_mass_storage.iSerialNumber=\"\" "\
+-- 
+2.0.1
+
configs/freescale_imx6dlsabresd_defconfig +1 -0
index 4177e16..62caf79 100644
@@ -25,3 +25,4 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/freescale/imx6sabresd"
configs/freescale_imx6qsabresd_defconfig +1 -0
index 16e4d0b..bc0aa46 100644
@@ -25,3 +25,4 @@ BR2_TARGET_UBOOT_FORMAT_IMX=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git"
 BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_3.10.17_1.0.0_ga"
+BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/freescale/imx6sabresd"
Signature · 1 line
1.9.1
#5 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

In reply to Luca Ceresoli

Dear Luca Ceresoli,

Quoted 7 lines · Luca Ceresoli

Luca Ceresoli (3):
configs/freescale_imx6qsabresd: rename imx6 to imx6q configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD freescale/imx6-sabresd: document how to create a bootable SD

Vincent Stehl? (1):
imx6sabresd: boot to /init in mfgtools mode

I've applied your four patches. However, I'd like to see additional patches to make the following improvements:

* For the defconfigs, select a specific version of the kernel headers. Currently, your defconfigs are building a 3.10 kernel, but the kernel headers used in the toolchain are the latest ones (i.e 3.16 currently), which is not good. This was already wrong in the existing defconfig, so I applied your patches nonetheless. But it should be fixed.

* For the last patch adding a U-Boot patch, I believe we would prefer to use the global patch dir mechanism now, rather than the U-Boot specific option for patches.

Thanks,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#6 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

Dear Thomas,

thanks for your suggestions.

Quoted 15 lines · Thomas Petazzoni

Dear Luca Ceresoli,

Quoted 7 lines · Luca Ceresoli

Luca Ceresoli (3):
configs/freescale_imx6qsabresd: rename imx6 to imx6q configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD freescale/imx6-sabresd: document how to create a bootable SD

Vincent Stehl? (1):
imx6sabresd: boot to /init in mfgtools mode

I've applied your four patches. However, I'd like to see additional patches to make the following improvements:

Quoted 6 lines

* For the defconfigs, select a specific version of the kernel headers. Currently, your defconfigs are building a 3.10 kernel, but the kernel headers used in the toolchain are the latest ones (i.e 3.16 currently), which is not good. This was already wrong in the existing defconfig, so I applied your patches nonetheless. But it should be fixed.

I'm working on this. I switched from Freescale's git repo to vanilla Linux, since the Freescale releases do not provide any later version.

However I'm going to test this before sending a patch, to make sure it works.

Quoted 4 lines

* For the last patch adding a U-Boot patch, I believe we would prefer to use the global patch dir mechanism now, rather than the U-Boot specific option for patches.

Yeah, fixed that. Will send together with the kernel version patch.

Signature · 1 line
Luca
#7 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

Hi,

Quoted 27 lines · Luca Ceresoli

Dear Thomas,

thanks for your suggestions.

Quoted 15 lines · Thomas Petazzoni

Dear Luca Ceresoli,

Quoted 7 lines · Luca Ceresoli

Luca Ceresoli (3):
configs/freescale_imx6qsabresd: rename imx6 to imx6q configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD freescale/imx6-sabresd: document how to create a bootable SD

Vincent Stehl? (1):
imx6sabresd: boot to /init in mfgtools mode

I've applied your four patches. However, I'd like to see additional patches to make the following improvements:

Quoted 6 lines

* For the defconfigs, select a specific version of the kernel headers. Currently, your defconfigs are building a 3.10 kernel, but the kernel headers used in the toolchain are the latest ones (i.e 3.16 currently), which is not good. This was already wrong in the existing defconfig, so I applied your patches nonetheless. But it should be fixed.

Quoted 2 lines

I'm working on this. I switched from Freescale's git repo to vanilla Linux, since the Freescale releases do not provide any later version.

...or maybe I'll do the other way around: use the kernel headers from Freescale's custom git repo, since the defconfig we currently use (imx_v7_defconfig) is not available in mainline, and the closest one in mainline (imx_v6_v7_defconfig) has several differences, and I'd like to keep things simple and working.

I wonder if there's a good reason to use a mainline kernel instead.

Signature · 1 line
Luca
#8 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

Dear Luca Ceresoli,

Quoted 7 lines · Luca Ceresoli

...or maybe I'll do the other way around: use the kernel headers from Freescale's custom git repo, since the defconfig we currently use (imx_v7_defconfig) is not available in mainline, and the closest one in mainline (imx_v6_v7_defconfig) has several differences, and I'd like to keep things simple and working.

I wonder if there's a good reason to use a mainline kernel instead.

Well, in general, mainline is nicer to look at. But from a practical point of view, the Freescale kernel is probably the one they have tested with all the multimedia features (OpenGL implementation, hardware accelerated video encoding/decoding) and so on. So I'd say that a Buildroot defconfig should probably use the Freescale kernel preferably, so that most things work out of the box for users. (And it *really* hurts me to say we should use vendor kernels instead of mainline kernels, as I hate vendor kernels!).

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#9 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

In reply to Thomas Petazzoni

Dear Vincent,

Quoted 9 lines · Thomas Petazzoni

Dear Luca Ceresoli,

Quoted 5 lines · Luca Ceresoli

Luca Ceresoli (3):
configs/freescale_imx6qsabresd: rename imx6 to imx6q configs/freescale_imx6dlsabresd: add defconfig for iMX6DL SabreSD freescale/imx6-sabresd: document how to create a bootable SD

Quoted 4 lines
Quoted 2 lines

Vincent Stehl? (1):
imx6sabresd: boot to /init in mfgtools mode

I've applied your four patches. However, I'd like to see additional

Now that your patch for USB booting in mfgtools mode has been applied, you may simplify the booting procedure documented in
https://community.freescale.com/docs/DOC-101842 to remove the tweaks that are not needed anymore.

Also, the sentence "there are no files for the sabre sd in the boards folder" is not true anymore.

Signature · 1 line
Luca
#10 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

Dear Luca Ceresoli,

Quoted 7 lines · Luca Ceresoli

Now that your patch for USB booting in mfgtools mode has been applied, you may simplify the booting procedure documented in
https://community.freescale.com/docs/DOC-101842 to remove the tweaks that are not needed anymore.

Also, the sentence "there are no files for the sabre sd in the boards folder" is not true anymore.

Also, why don't we have a package to build the host tool imx-usb-loader? That would even further simply the instructions.

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#11 lore raw

v4 cover Improvements to i.MX6 SABRESD boards support

Dear Thomas,

Quoted 9 lines · Thomas Petazzoni

Dear Luca Ceresoli,

Quoted 5 lines · Luca Ceresoli

Now that your patch for USB booting in mfgtools mode has been applied, you may simplify the booting procedure documented in
https://community.freescale.com/docs/DOC-101842 to remove the tweaks that are not needed anymore.

Quoted 5 lines
Quoted 2 lines

Also, the sentence "there are no files for the sabre sd in the boards folder" is not true anymore.

Also, why don't we have a package to build the host tool imx-usb-loader? That would even further simply the instructions.

Sure it would. It's on my todo list, but I haven't started looking at it yet. It may be be in the next patchset unless I hit any build issues.

Signature · 1 line
Luca