edac, amd64_edac: Modify usage of amd64_read_dct_pci_cfg()
Subsystems (2)
PATCH v5 1/1 edac, amd64_edac: Modify usage of amd64_read_dct_pci_cfg()
From: Aravind Gopalakrishnan <[email protected]>
Rationale behind this change:
- F2x1xx addresses were stopped from being mapped explicitly to DCT1 from F15h (OR) onwards. They use _dct[0:1] mechanism to access the registers. So we should move away from using address ranges to select DCT for these families.
- On newer processors, the address ranges used to indicate DCT1 (0x140, 0x1a0) have different meanings than what is assumed currently.
Changes introduced:
- amd64_read_dct_pci_cfg() now takes in dct value and uses it for 'selecting the dct'
- Update usage of the function. Keep in mind that different families have specific handling requirements
- Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different from amd64_read_pci_cfg()
- Move the k8 specific check to amd64_read_pci_cfg
- Remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg()
- Remove now needless .read_dct_pci_cfg
Testing:
- Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG' and mce_amd_inj
- driver obtains info from F2x registers and caches it in pvt structures correctly
- ECC decoding works fine
---
Changes in V5: (per Boris suggestion)
- use switch instead of if() in amd64_read_dct_pci_cfg() for better readability.
- retain if(!dct_ganging_enabled) condition while reading dclr1.
Change in V4: (per Boris suggestion)
- move amd64_read_dct_pci_cfg() to amd64_edac.c and save exporting f15h_select_dct() in the process
Changes in V3:
- per Boris suggestion
- move dct selection logic to amd64_read_dct_pci_cfg()
- remove f15_read_dct_pci_cfg() and move logic to amd64_read_dct_pci_cfg()
- misc
- modify logic in amd64_read_dct_pci_cfg() to keep in mind the specific read handling requirements of different families. Previous version had failed to do that.
Changes in V2: (per Boris suggestion)
- Hide family checks in amd64_read_dct_pci_cfg()
- Use pvt structure for family checks and not boot_cpu_data
drivers/edac/amd64_edac.c | 146 +++++++++++++++++++++++++--------------------- drivers/edac/amd64_edac.h | 5 -- 2 files changed, 80 insertions(+), 71 deletions(-)
drivers/edac/amd64_edac.c +80 -66
@@ -87,61 +87,73 @@ int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, }/* +* Select DCT to which PCI cfg accesses are routed +*/ +static void f15h_select_dct (struct amd64_pvt *pvt,u8 dct) +{ +u32 reg =0 ; + +amd64_read_pci_cfg (pvt->F1,DCT_CFG_SEL , ®); + reg &= (pvt->model ==0x30 ) ? ~3 : ~1 ; + reg |= dct; +amd64_write_pci_cfg (pvt->F1,DCT_CFG_SEL , reg); +} + +/* * * Depending on the family, F2 DCT reads need special handling: * -* K8: has a single DCT only +* K8: has a single DCT only and no address offsets >= 0x100 * * F10h: each DCT has its own set of regs * DCT0 -> F2x040.. * DCT1 -> F2x140.. * -* F15h: we select which DCT we access using F1x10C[DctCfgSel] -* * F16h: has only 1 DCT +* +* F15h: we select which DCT we access using F1x10C[DctCfgSel] */ -static int k8_read_dct_pci_cfg (struct amd64_pvt *pvt,int addr,u32 *val, -const char *func) +static inline int amd64_read_dct_pci_cfg (struct amd64_pvt *pvt,u8 dct, +int offset,u32 *val) { -if (addr >=0x100 ) -return -EINVAL ; - -return __amd64_read_pci_cfg_dword (pvt->F2, addr, val, func); -} +switch (pvt->fam) { +case 0xf : +if (dct || offset >=0x100 ) +return -EINVAL ; +break ; -static int f10_read_dct_pci_cfg (struct amd64_pvt *pvt,int addr,u32 *val, -const char *func) -{ -return __amd64_read_pci_cfg_dword (pvt->F2, addr, val, func); -} +case 0x10 : +if (dct) { +/* +* Note: If ganging is enabled, barring the regs +* F2x[1,0]98 and F2x[1,0]9C; reads reads to F2x1xx +* return 0. (cf. Section 2.8.1 F10h BKDG) +*/ +if (dct_ganging_enabled (pvt)) +return 0 ; -/* -* Select DCT to which PCI cfg accesses are routed -*/ -static void f15h_select_dct (struct amd64_pvt *pvt,u8 dct) -{ -u32 reg =0 ; + offset +=0x100 ; + } +break ; -amd64_read_pci_cfg (pvt->F1,DCT_CFG_SEL , ®); - reg &= (pvt->model >=0x30 ) ? ~3 : ~1 ; - reg |= dct; -amd64_write_pci_cfg (pvt->F1,DCT_CFG_SEL , reg); -} +case 0x15 : +/* +* F15h: F2x1xx addresses do not map explicitly to DCT1. +* We should select which DCT we access using F1x10C[DctCfgSel] +*/ + dct = (dct && pvt->model ==0x30 ) ?3 : dct; +f15h_select_dct (pvt, dct); +break ; -static int f15_read_dct_pci_cfg (struct amd64_pvt *pvt,int addr,u32 *val, -const char *func) -{ -u8 dct =0 ; +case 0x16 : +if (dct) +return -EINVAL ; +break ; -/* For F15 M30h, the second dct is DCT 3, refer to BKDG Section 2.10 */ -if (addr >=0x140 && addr <=0x1a0 ) { - dct = (pvt->model >=0x30 ) ?3 :1 ; - addr -=0x100 ; +default : +break ; } - -f15h_select_dct (pvt, dct); - -return __amd64_read_pci_cfg_dword (pvt->F2, addr, val, func); +return amd64_read_pci_cfg (pvt->F2, offset, val); }/*
@@ -768,16 +780,17 @@ static void read_dct_base_mask(struct amd64_pvt *pvt)u32 *base0 = &pvt->csels[0 ].csbases[cs];u32 *base1 = &pvt->csels[1 ].csbases[cs]; -if (!amd64_read_dct_pci_cfg (pvt, reg0, base0)) +if (!amd64_read_dct_pci_cfg (pvt,0 , reg0, base0))edac_dbg (0 ," DCSB0[%d]=0x%08x reg: F2x%x\n" , cs, *base0, reg0); -if (pvt->fam ==0xf ||dct_ganging_enabled (pvt)) +if (pvt->fam ==0xf )continue ; -if (!amd64_read_dct_pci_cfg (pvt, reg1, base1)) +if (!amd64_read_dct_pci_cfg (pvt,1 , reg0, base1))edac_dbg (0 ," DCSB1[%d]=0x%08x reg: F2x%x\n" , - cs, *base1, reg1); + cs, *base1, (pvt->fam ==0x10 ) ? reg1 + : reg0); }for_each_chip_select_mask (cs,0 , pvt) {
@@ -786,16 +799,17 @@ static void read_dct_base_mask(struct amd64_pvt *pvt)u32 *mask0 = &pvt->csels[0 ].csmasks[cs];u32 *mask1 = &pvt->csels[1 ].csmasks[cs]; -if (!amd64_read_dct_pci_cfg (pvt, reg0, mask0)) +if (!amd64_read_dct_pci_cfg (pvt,0 , reg0, mask0))edac_dbg (0 ," DCSM0[%d]=0x%08x reg: F2x%x\n" , cs, *mask0, reg0); -if (pvt->fam ==0xf ||dct_ganging_enabled (pvt)) +if (pvt->fam ==0xf )continue ; -if (!amd64_read_dct_pci_cfg (pvt, reg1, mask1)) +if (!amd64_read_dct_pci_cfg (pvt,1 , reg0, mask1))edac_dbg (0 ," DCSM1[%d]=0x%08x reg: F2x%x\n" , - cs, *mask1, reg1); + cs, *mask1, (pvt->fam ==0x10 ) ? reg1 + : reg0); } }
@@ -1198,7 +1212,7 @@ static void read_dram_ctl_register(struct amd64_pvt *pvt)if (pvt->fam ==0xf )return ; -if (!amd64_read_dct_pci_cfg (pvt,DCT_SEL_LO , &pvt->dct_sel_lo)) { +if (!amd64_read_pci_cfg (pvt->F2,DCT_SEL_LO , &pvt->dct_sel_lo)) {edac_dbg (0 ,"F2x110 (DCTSelLow): 0x%08x, High range addrs at: 0x%x\n" , pvt->dct_sel_lo,dct_sel_baseaddr (pvt));
@@ -1219,7 +1233,7 @@ static void read_dram_ctl_register(struct amd64_pvt *pvt) dct_sel_interleave_addr(pvt)); } -amd64_read_dct_pci_cfg (pvt,DCT_SEL_HI , &pvt->dct_sel_hi); +amd64_read_pci_cfg (pvt->F2,DCT_SEL_HI , &pvt->dct_sel_hi); }/*
@@ -1430,7 +1444,7 @@ static u64 f1x_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr)return sys_addr; } -amd64_read_dct_pci_cfg (pvt,SWAP_INTLV_REG , &swap_reg); +amd64_read_pci_cfg (pvt->F2,SWAP_INTLV_REG , &swap_reg);if (!(swap_reg &0x1 ))return sys_addr;
@@ -1723,10 +1737,16 @@ static void debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)WARN_ON (ctrl !=0 ); } - dbam = (ctrl && !dct_ganging_enabled (pvt)) ? pvt->dbam1 : pvt->dbam0; - dcsb = (ctrl && !dct_ganging_enabled (pvt)) ? pvt->csels[1 ].csbases - : pvt->csels[0 ].csbases; - +if (pvt->fam ==0x10 ) { + dbam = (ctrl && !dct_ganging_enabled (pvt)) ? pvt->dbam1 + : pvt->dbam0; + dcsb = (ctrl && !dct_ganging_enabled (pvt)) ? + pvt->csels[1 ].csbases : + pvt->csels[0 ].csbases; + }else if (ctrl) { + dbam = pvt->dbam0; + dcsb = pvt->csels[1 ].csbases; + }edac_dbg (1 ,"F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n" , ctrl, dbam);
@@ -1760,7 +1780,6 @@ static struct amd64_family_type family_types[] = { .early_channel_count = k8_early_channel_count, .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, .dbam_to_cs = k8_dbam_to_chip_select, - .read_dct_pci_cfg = k8_read_dct_pci_cfg, } }, [F10_CPUS] = {
@@ -1771,7 +1790,6 @@ static struct amd64_family_type family_types[] = { .early_channel_count = f1x_early_channel_count, .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, .dbam_to_cs = f10_dbam_to_chip_select, - .read_dct_pci_cfg = f10_read_dct_pci_cfg, } }, [F15_CPUS] = {
@@ -1782,7 +1800,6 @@ static struct amd64_family_type family_types[] = { .early_channel_count = f1x_early_channel_count, .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, .dbam_to_cs = f15_dbam_to_chip_select, - .read_dct_pci_cfg = f15_read_dct_pci_cfg, } }, [F15_M30H_CPUS] = {
@@ -1793,7 +1810,6 @@ static struct amd64_family_type family_types[] = { .early_channel_count = f1x_early_channel_count, .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, .dbam_to_cs = f16_dbam_to_chip_select, - .read_dct_pci_cfg = f15_read_dct_pci_cfg, } }, [F16_CPUS] = {
@@ -1804,7 +1820,6 @@ static struct amd64_family_type family_types[] = { .early_channel_count = f1x_early_channel_count, .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, .dbam_to_cs = f16_dbam_to_chip_select, - .read_dct_pci_cfg = f10_read_dct_pci_cfg, } }, [F16_M30H_CPUS] = {
@@ -1815,7 +1830,6 @@ static struct amd64_family_type family_types[] = { .early_channel_count = f1x_early_channel_count, .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, .dbam_to_cs = f16_dbam_to_chip_select, - .read_dct_pci_cfg = f10_read_dct_pci_cfg, } }, };
@@ -2148,25 +2162,25 @@ static void read_mc_regs(struct amd64_pvt *pvt)read_dct_base_mask (pvt);amd64_read_pci_cfg (pvt->F1,DHAR , &pvt->dhar); -amd64_read_dct_pci_cfg (pvt,DBAM0 , &pvt->dbam0); +amd64_read_dct_pci_cfg (pvt,0 ,DBAM0 , &pvt->dbam0);amd64_read_pci_cfg (pvt->F3,F10_ONLINE_SPARE , &pvt->online_spare); -amd64_read_dct_pci_cfg (pvt,DCLR0 , &pvt->dclr0); -amd64_read_dct_pci_cfg (pvt,DCHR0 , &pvt->dchr0); +amd64_read_dct_pci_cfg (pvt,0 ,DCLR0 , &pvt->dclr0); +amd64_read_dct_pci_cfg (pvt,0 ,DCHR0 , &pvt->dchr0);if (!dct_ganging_enabled (pvt)) { -amd64_read_dct_pci_cfg (pvt,DCLR1 , &pvt->dclr1); -amd64_read_dct_pci_cfg (pvt,DCHR1 , &pvt->dchr1); +amd64_read_dct_pci_cfg (pvt,1 ,DCLR0 , &pvt->dclr1); +amd64_read_dct_pci_cfg (pvt,1 ,DCHR0 , &pvt->dchr1); } pvt->ecc_sym_sz =4 ;if (pvt->fam >=0x10 ) {amd64_read_pci_cfg (pvt->F3,EXT_NB_MCA_CFG , &tmp); +/* F16h has only DCT0, so no need to read dbam1 */ if (pvt->fam !=0x16 ) -/* F16h has only DCT0 */ -amd64_read_dct_pci_cfg (pvt,DBAM1 , &pvt->dbam1); +amd64_read_dct_pci_cfg (pvt,1 ,DBAM0 , &pvt->dbam1);/* F10h, revD and later can do x8 ECC too */ if ((pvt->fam >0x10 || pvt->model >7 ) && tmp &BIT (25 ))
drivers/edac/amd64_edac.h +0 -5
@@ -481,8 +481,6 @@ struct low_ops {void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci,u64 sys_addr,struct err_info *);int (*dbam_to_cs) (struct amd64_pvt *pvt,u8 dct,unsigned cs_mode); -int (*read_dct_pci_cfg) (struct amd64_pvt *pvt,int offset, -u32 *val,const char *func); };struct amd64_family_type {
@@ -502,9 +500,6 @@ int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset,#define amd64_write_pci_cfg (pdev, offset, val) \ __amd64_write_pci_cfg_dword(pdev, offset, val, __func__) -#define amd64_read_dct_pci_cfg (pvt, offset, val) \ - pvt->ops->read_dct_pci_cfg(pvt, offset, val, __func__) -int amd64_get_dram_hole_info (struct mem_ctl_info *mci,u64 *hole_base,u64 *hole_offset,u64 *hole_size);
Signature · 1 line
2.0.2
Quoted 48 lines · Aravind Gopalakrishnan
From: Aravind Gopalakrishnan <[email protected]>
Rationale behind this change:
- F2x1xx addresses were stopped from being mapped explicitly to DCT1 from F15h (OR) onwards. They use _dct[0:1] mechanism to access the registers. So we should move away from using address ranges to select DCT for these families.
- On newer processors, the address ranges used to indicate DCT1 (0x140,0x1a0) have different meanings than what is assumed currently.Changes introduced:
-amd64_read_dct_pci_cfg()now takes in dct value and uses it for 'selecting the dct'
- Update usage of the function. Keep in mind that different families have specific handling requirements
- Remove [k8|f10]_read_dct_pci_cfg() as they don't do much different fromamd64_read_pci_cfg()
- Move the k8 specific check toamd64_read_pci_cfg
- Removef15_read_dct_pci_cfg()and move logic toamd64_read_dct_pci_cfg()
- Remove now needless .read_dct_pci_cfgTesting:
- Tested on Fam 10h; Fam15h Models: 00h, 30h; Fam16h using 'EDAC_DEBUG' andmce_amd_inj
- driver obtains info from F2x registers and caches it in pvt structures correctly
- ECC decoding works fineSigned-off-by Aravind Gopalakrishnan <[email protected]>---
Changes in V5: (per Boris suggestion)
- use switch instead ofif()inamd64_read_dct_pci_cfg()for better readability.
- retainif(!dct_ganging_enabled)condition while reading dclr1.Change in V4: (per Boris suggestion)
- moveamd64_read_dct_pci_cfg()toamd64_edac.cand save exportingf15h_select_dct()in the processChanges in V3:
- per Boris suggestion
- move dct selection logic toamd64_read_dct_pci_cfg()
- removef15_read_dct_pci_cfg()and move logic toamd64_read_dct_pci_cfg()
- misc
- modify logic inamd64_read_dct_pci_cfg()to keep in mind the specific read handling requirements of different families. Previous version had failed to do that.
Quoted 7 lines
Changes in V2: (per Boris suggestion)
- Hide family checks inamd64_read_dct_pci_cfg()
- Use pvt structure for family checks and notboot_cpu_datadrivers/edac/amd64_edac.c | 146 +++++++++++++++++++++++++--------------------- drivers/edac/amd64_edac.h | 5 -- 2 files changed, 80 insertions(+), 71 deletions(-)
Applied, thanks.
Signature · 5 lines
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--