Skip to contentSkip to conversation

fastboot: handle flash write to GPT partition

PATCH New Steve Rae 2 participants 2 messages Sep 22, 2014 – Sep 23, 2014

lore
Share & tools
lore

Steve Rae

author
#0 lore raw

PATCH 1/1 fastboot: handle flash write to GPT partition

Implement a feature to allow fastboot to write the downloaded image to the space reserved for the Protective MBR and the Primary GUID Partition Table.

---
This series depends on:
http://patchwork.ozlabs.org/patch/383184/ (to 388186)

 README          |  7 +++++++
 common/fb_mmc.c | 19 ++++++++++++++++---
 2 files changed, 23 insertions(+), 3 deletions(-)
README +7 -0
index e8341b7..2e4e0c4 100644
@@ -1639,6 +1639,13 @@ The following options need to be configured:
 		regarding the non-volatile storage device. Define this to
 		the eMMC device that fastboot should use to store the image.
 
+		CONFIG_FASTBOOT_GPT_NAME
+		The fastboot "flash" command supports writing the downloaded
+		image to the Protective MBR and the Primary GUID Partition
+		Table. This occurs when the specified "partition name" on the
+		"fastboot flash" command line matches this value.
+		Default is GPT_ENTRY_NAME (currently "gpt") if undefined.
+
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
 		CONFIG_JFFS2_NAND_DEV
common/fb_mmc.c +16 -3
index fb06d8a..89fbf23 100644
@@ -4,12 +4,17 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
+#include <config.h>
 #include <common.h>
 #include <fb_mmc.h>
 #include <part.h>
 #include <aboot.h>
 #include <sparse_format.h>
 
+#ifndef CONFIG_FASTBOOT_GPT_NAME
+#define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME
+#endif
+
 /* The 64 defined bytes plus the '\0' */
 #define RESPONSE_LEN	(64 + 1)
 
@@ -62,9 +67,9 @@ static void write_raw_image(block_dev_desc_t *dev_desc, disk_partition_t *info,
 void fb_mmc_flash_write(const char *cmd, void *download_buffer,
 			unsigned int download_bytes, char *response)
 {
-	int ret;
 	block_dev_desc_t *dev_desc;
 	disk_partition_t info;
+	lbaint_t blksz;
 
 	/* initialize the response buffer */
 	response_str = response;
@@ -76,8 +81,16 @@ void fb_mmc_flash_write(const char *cmd, void *download_buffer,
 		return;
 	}
 
-	ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
-	if (ret) {
+	if (strcmp(cmd, CONFIG_FASTBOOT_GPT_NAME) == 0) {
+		printf("%s: updating GUID Partition Table (including MBR)\n",
+		       __func__);
+		/* start at Protective MBR */
+		info.start = (GPT_PRIMARY_PARTITION_TABLE_LBA - 1);
+		blksz = dev_desc->blksz;
+		info.blksz = blksz;
+		/* assume that the Partition Entry Array starts in LBA 2 */
+		info.size = (2 + (GPT_ENTRY_NUMBERS * GPT_ENTRY_SIZE) / blksz);
+	} else if (get_partition_info_efi_by_name(dev_desc, cmd, &info)) {
 		error("cannot find partition: '%s'\n", cmd);
 		fastboot_fail("cannot find partition");
 		return;
Signature · 1 line
1.8.5
#1 lore raw

PATCH 1/1 fastboot: handle flash write to GPT partition

Quoted 5 lines · Steve Rae

Implement a feature to allow fastboot to write the downloaded image to the space reserved for the Protective MBR and the Primary GUID Partition Table.

Please CC Lukasz ...

Best regards,
Marek Vasut