Skip to contentSkip to conversation

ARM: rockchip: add cpuclk handling - clock-tree part

PATCH New Heiko Stuebner 3 participants 13 messages Sep 26, 2014

Subsystems (3)
lore
Share & tools
lore

Heiko Stuebner

author maintainer
#0 lore raw

v4 cover ARM: rockchip: add cpuclk handling - clock-tree part

This series implements cpu frequency-scaling for Rockchip SoCs. The whole handling of the armclk frequency changes and therefore the implementention is very similar to the recent series for Samsung SoCs from Thomas Abraham.

Tested on a
- rk3066 Marsboard
- rk3188 Radxa Rock
- rk3288 Evaluation board

This is the part that would go through the clock tree and the patches are build against current clk-next.

-------
On the arm-soc side we would need the ARMCLK id in an exported branch from the clk tree so that the devicetree changes can use this new id. But as 3.17 is supposed to be released this weekend, the devicetree parts will maybe have to wait for 3.18-rc1 in any case.
-------

The series also is split, as clk-next and the arm-soc parts have diverged so much, that it's not possible to create one series against one tree and stay sane.

changes since v3:
- address more comments from Doug Anderson:
main change setting the dividers in the post_rate callback
- use __initdata for the rate tables
While it could use __initconst the current code causes a section type conflict with something else, so this could possibly be solved at a later time
changes since v2:
- add patch removing the pll clk-notifier
- in cpuclk do parent change and alt_div setting in one go changes since v1:
- address comments received concerning smaller issues
- split series into two, one for clk-next and one for arm-soc

Doug Anderson (1):
clk: rockchip: change pll rate without a clk-notifier

Heiko Stuebner (6):
clk: rockchip: fix rk3066 pll status register location
clk: rockchip: reparent aclk_cpu_pre to the gpll
clk: rockchip: make tightly bound armclk child-clocks read-only
clk: rockchip: add new clock-type for the cpuclk
clk: rockchip: add binding id for ARMCLK
clk: rockchip: switch to using the new cpuclk type for armclk

Jianqun (1):
clk: rockchip: fix rk3288 pll status register location

 drivers/clk/rockchip/Makefile                 |   1 +
 drivers/clk/rockchip/clk-cpu.c                | 329 ++++++++++++++++++++++++++
 drivers/clk/rockchip/clk-pll.c                |  63 +----
 drivers/clk/rockchip/clk-rk3188.c             | 161 +++++++++++--
 drivers/clk/rockchip/clk-rk3288.c             |  93 +++++++-
 drivers/clk/rockchip/clk.c                    |  20 ++
 drivers/clk/rockchip/clk.h                    |  36 +++
 include/dt-bindings/clock/rk3188-cru-common.h |   1 +
 include/dt-bindings/clock/rk3288-cru.h        |   1 +
 9 files changed, 627 insertions(+), 78 deletions(-)
 create mode 100644 drivers/clk/rockchip/clk-cpu.c
Signature · 1 line
2.1.0
author maintainer
#1 lore raw

PATCH v4 1/8 clk: rockchip: change pll rate without a clk-notifier

From: Doug Anderson <[email protected]>

The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL.

One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode.

Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort.

Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang.

---
 drivers/clk/rockchip/clk-pll.c | 63 +++++++++---------------------------------
 1 file changed, 13 insertions(+), 50 deletions(-)
drivers/clk/rockchip/clk-pll.c +13 -50
index f2a1c7a..a3e886a 100644
@@ -34,7 +34,6 @@ struct rockchip_clk_pll {
 	const struct clk_ops	*pll_mux_ops;
 
 	struct notifier_block	clk_nb;
-	bool			rate_change_remuxed;
 
 	void __iomem		*reg_base;
 	int			lock_offset;
@@ -109,38 +108,6 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
 }
 
 /**
- * Set pll mux when changing the pll rate.
- * This makes sure to move the pll mux away from the actual pll before
- * changing its rate and back to the original parent after the change.
- */
-static int rockchip_pll_notifier_cb(struct notifier_block *nb,
-					unsigned long event, void *data)
-{
-	struct rockchip_clk_pll *pll = to_rockchip_clk_pll_nb(nb);
-	struct clk_mux *pll_mux = &pll->pll_mux;
-	const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
-	int cur_parent;
-
-	switch (event) {
-	case PRE_RATE_CHANGE:
-		cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
-		if (cur_parent == PLL_MODE_NORM) {
-			pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
-			pll->rate_change_remuxed = 1;
-		}
-		break;
-	case POST_RATE_CHANGE:
-		if (pll->rate_change_remuxed) {
-			pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
-			pll->rate_change_remuxed = 0;
-		}
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
-/**
  * PLL used in RK3066, RK3188 and RK3288
  */
 
@@ -194,6 +161,10 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
 	const struct rockchip_pll_rate_table *rate;
 	unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate);
 	struct regmap *grf = rockchip_clk_get_grf();
+	struct clk_mux *pll_mux = &pll->pll_mux;
+	const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
+	int rate_change_remuxed = 0;
+	int cur_parent;
 	int ret;
 
 	if (IS_ERR(grf)) {
@@ -216,6 +187,12 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
 	pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n",
 		 __func__, rate->rate, rate->nr, rate->no, rate->nf);
 
+	cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
+	if (cur_parent == PLL_MODE_NORM) {
+		pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
+		rate_change_remuxed = 1;
+	}
+
 	/* enter reset mode */
 	writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0),
 	       pll->reg_base + RK3066_PLLCON(3));
@@ -247,6 +224,9 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
 		rockchip_rk3066_pll_set_rate(hw, old_rate, prate);
 	}
 
+	if (rate_change_remuxed)
+		pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
+
 	return ret;
 }
 
@@ -310,7 +290,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 	struct clk_mux *pll_mux;
 	struct clk *pll_clk, *mux_clk;
 	char pll_name[20];
-	int ret;
 
 	if (num_parents != 2) {
 		pr_err("%s: needs two parent clocks\n", __func__);
@@ -367,7 +346,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 	pll->lock_offset = grf_lock_offset;
 	pll->lock_shift = lock_shift;
 	pll->lock = lock;
-	pll->clk_nb.notifier_call = rockchip_pll_notifier_cb;
 
 	pll_clk = clk_register(NULL, &pll->hw);
 	if (IS_ERR(pll_clk)) {
@@ -377,14 +355,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 		goto err_pll;
 	}
 
-	ret = clk_notifier_register(pll_clk, &pll->clk_nb);
-	if (ret) {
-		pr_err("%s: failed to register clock notifier for %s : %d\n",
-				__func__, name, ret);
-		mux_clk = ERR_PTR(ret);
-		goto err_pll_notifier;
-	}
-
 	/* create the mux on top of the real pll */
 	pll->pll_mux_ops = &clk_mux_ops;
 	pll_mux = &pll->pll_mux;
@@ -417,13 +387,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 	return mux_clk;
 
 err_mux:
-	ret = clk_notifier_unregister(pll_clk, &pll->clk_nb);
-	if (ret) {
-		pr_err("%s: could not unregister clock notifier in error path : %d\n",
-		       __func__, ret);
-		return mux_clk;
-	}
-err_pll_notifier:
 	clk_unregister(pll_clk);
 err_pll:
 	kfree(pll);
Signature · 1 line
2.1.0
author maintainer
#2 lore raw

PATCH v4 2/8 clk: rockchip: fix rk3066 pll status register location

In reply to Heiko Stuebner

The register providing the pll lock status is at a different address on the rk3066. The error became apparent while working on cpufreq support for the rockchip SoCs.

---
 drivers/clk/rockchip/clk-rk3188.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/clk/rockchip/clk-rk3188.c +7 -3
index 0147614..1c5e644 100644
@@ -19,6 +19,7 @@
 #include <dt-bindings/clock/rk3188-cru-common.h>
 #include "clk.h"
 
+#define RK3066_GRF_SOC_STATUS	0x15c
 #define RK3188_GRF_SOC_STATUS	0xac
 
 enum rk3188_plls {
@@ -629,9 +630,6 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 		pr_warn("%s: could not register clock usb480m: %ld\n",
 			__func__, PTR_ERR(clk));
 
-	rockchip_clk_register_plls(rk3188_pll_clks,
-				   ARRAY_SIZE(rk3188_pll_clks),
-				   RK3188_GRF_SOC_STATUS);
 	rockchip_clk_register_branches(common_clk_branches,
 				  ARRAY_SIZE(common_clk_branches));
 	rockchip_clk_protect_critical(rk3188_critical_clocks,
@@ -644,6 +642,9 @@ static void __init rk3188_common_clk_init(struct device_node *np)
 static void __init rk3066a_clk_init(struct device_node *np)
 {
 	rk3188_common_clk_init(np);
+	rockchip_clk_register_plls(rk3188_pll_clks,
+				   ARRAY_SIZE(rk3188_pll_clks),
+				   RK3066_GRF_SOC_STATUS);
 	rockchip_clk_register_branches(rk3066a_clk_branches,
 				  ARRAY_SIZE(rk3066a_clk_branches));
 }
@@ -652,6 +653,9 @@ CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
 static void __init rk3188a_clk_init(struct device_node *np)
 {
 	rk3188_common_clk_init(np);
+	rockchip_clk_register_plls(rk3188_pll_clks,
+				   ARRAY_SIZE(rk3188_pll_clks),
+				   RK3188_GRF_SOC_STATUS);
 	rockchip_clk_register_branches(rk3188_clk_branches,
 				  ARRAY_SIZE(rk3188_clk_branches));
 }
Signature · 1 line
2.1.0
author maintainer
#3 lore raw

PATCH v4 3/8 clk: rockchip: fix rk3288 pll status register location

In reply to Heiko Stuebner

From: Jianqun <[email protected]>

In RK3288, APLL lock status bit is in GRF_SOC_STATUS1, but in RK3188, is GRFSOC_STATUS0.

Also name the constant accordingly as GRF_SOC_STATUS1 to prevent confusion.

---
 drivers/clk/rockchip/clk-rk3288.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/rockchip/clk-rk3288.c +2 -2
index 978ab24..ddca0a0 100644
@@ -20,7 +20,7 @@
 #include "clk.h"
 
 #define RK3288_GRF_SOC_CON(x)	(0x244 + x * 4)
-#define RK3288_GRF_SOC_STATUS	0x280
+#define RK3288_GRF_SOC_STATUS1	0x284
 
 enum rk3288_plls {
 	apll, dpll, cpll, gpll, npll,
@@ -733,7 +733,7 @@ static void __init rk3288_clk_init(struct device_node *np)
 
 	rockchip_clk_register_plls(rk3288_pll_clks,
 				   ARRAY_SIZE(rk3288_pll_clks),
-				   RK3288_GRF_SOC_STATUS);
+				   RK3288_GRF_SOC_STATUS1);
 	rockchip_clk_register_branches(rk3288_clk_branches,
 				  ARRAY_SIZE(rk3288_clk_branches));
 	rockchip_clk_protect_critical(rk3288_critical_clocks,
Signature · 1 line
2.1.0
author maintainer
#4 lore raw

PATCH v4 4/8 clk: rockchip: reparent aclk_cpu_pre to the gpll

In reply to Heiko Stuebner

aclk_cpu_pre on the rk3188 can either be sourced from the armclk or the gpll. To reduce complexity on apll changes caused by cpufreq, reparent it always to the gpll source.

If really necessary it could be reparented back on a per board level using the assigned-clocks mechanism.

---
 drivers/clk/rockchip/clk-rk3188.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/clk/rockchip/clk-rk3188.c +21 -0
index 1c5e644..6a81bc9 100644
@@ -652,12 +652,33 @@ CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
 
 static void __init rk3188a_clk_init(struct device_node *np)
 {
+	struct clk *clk1, *clk2;
+	unsigned long rate;
+	int ret;
+
 	rk3188_common_clk_init(np);
 	rockchip_clk_register_plls(rk3188_pll_clks,
 				   ARRAY_SIZE(rk3188_pll_clks),
 				   RK3188_GRF_SOC_STATUS);
 	rockchip_clk_register_branches(rk3188_clk_branches,
 				  ARRAY_SIZE(rk3188_clk_branches));
+
+	/* reparent aclk_cpu_pre from apll */
+	clk1 = __clk_lookup("aclk_cpu_pre");
+	clk2 = __clk_lookup("gpll");
+	if (clk1 && clk2) {
+		rate = clk_get_rate(clk1);
+
+		ret = clk_set_parent(clk1, clk2);
+		if (ret < 0)
+			pr_warn("%s: could not reparent aclk_cpu_pre to gpll\n",
+				__func__);
+
+		clk_set_rate(clk1, rate);
+	} else {
+		pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n",
+			__func__);
+	}
 }
 CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init);
 
Signature · 1 line
2.1.0
author maintainer
#5 lore raw

PATCH v4 5/8 clk: rockchip: make tightly bound armclk child-clocks read-only

In reply to Heiko Stuebner

Rockchip SoCs contain clocks tightly bound to the armclk, where the best rate / divider is supplied by the vendor after careful measuring. Often this ideal rate may be greater than the current rate.

Therefore prevent the ccf from trying to set these dividers itself by setting them to read-only.

In the case of the rk3066, this also includes the aclk_cpu, which makes it necessary to also split its direct child-clocks (pclk_cpu, hclk_cpu, ...) into individual definitions for rk3066 and rk3188.

---
 drivers/clk/rockchip/clk-rk3188.c | 26 ++++++++++++++++++--------
 drivers/clk/rockchip/clk-rk3288.c | 18 +++++++++---------
 2 files changed, 27 insertions(+), 17 deletions(-)
drivers/clk/rockchip/clk-rk3188.c +18 -8
index 6a81bc9..adfbfef 100644
@@ -174,17 +174,10 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	GATE(0, "aclk_cpu", "aclk_cpu_pre", 0,
 			RK2928_CLKGATE_CON(0), 3, GFLAGS),
 
-	DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0,
-			RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
 	GATE(0, "atclk_cpu", "pclk_cpu_pre", 0,
 			RK2928_CLKGATE_CON(0), 6, GFLAGS),
 	GATE(0, "pclk_cpu", "pclk_cpu_pre", 0,
 			RK2928_CLKGATE_CON(0), 5, GFLAGS),
-	DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0,
-			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
-	COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0,
-			RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
-			RK2928_CLKGATE_CON(4), 9, GFLAGS),
 	GATE(0, "hclk_cpu", "hclk_cpu_pre", 0,
 			RK2928_CLKGATE_CON(0), 4, GFLAGS),
 
@@ -416,7 +409,17 @@ static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = {
 	COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0,
 			RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 0, 5, DFLAGS),
 	DIVTBL(0, "aclk_cpu_pre", "armclk", 0,
-			RK2928_CLKSEL_CON(1), 0, 3, DFLAGS, div_aclk_cpu_t),
+			RK2928_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_aclk_cpu_t),
+	DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0,
+			RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO
+							    | CLK_DIVIDER_READ_ONLY),
+	DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0,
+			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO
+							   | CLK_DIVIDER_READ_ONLY),
+	COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0,
+			RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO
+							    | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(4), 9, GFLAGS),
 
 	GATE(CORE_L2C, "core_l2c", "aclk_cpu", 0,
 			RK2928_CLKGATE_CON(9), 4, GFLAGS),
@@ -534,6 +537,13 @@ static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = {
 	/* do not source aclk_cpu_pre from the apll, to keep complexity down */
 	COMPOSITE_NOGATE(0, "aclk_cpu_pre", mux_aclk_cpu_p, CLK_SET_RATE_NO_REPARENT,
 			RK2928_CLKSEL_CON(0), 5, 1, MFLAGS, 0, 5, DFLAGS),
+	DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0,
+			RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0,
+			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0,
+			RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO,
+			RK2928_CLKGATE_CON(4), 9, GFLAGS),
 
 	GATE(CORE_L2C, "core_l2c", "armclk", 0,
 			RK2928_CLKGATE_CON(9), 4, GFLAGS),
drivers/clk/rockchip/clk-rk3288.c +9 -9
index ddca0a0..a6e2b84 100644
@@ -170,31 +170,31 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 			RK3288_CLKSEL_CON(0), 15, 1, MFLAGS, 8, 5, DFLAGS),
 
 	COMPOSITE_NOMUX(0, "armcore0", "armclk", 0,
-			RK3288_CLKSEL_CON(36), 0, 3, DFLAGS,
+			RK3288_CLKSEL_CON(36), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 0, GFLAGS),
 	COMPOSITE_NOMUX(0, "armcore1", "armclk", 0,
-			RK3288_CLKSEL_CON(36), 4, 3, DFLAGS,
+			RK3288_CLKSEL_CON(36), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 1, GFLAGS),
 	COMPOSITE_NOMUX(0, "armcore2", "armclk", 0,
-			RK3288_CLKSEL_CON(36), 8, 3, DFLAGS,
+			RK3288_CLKSEL_CON(36), 8, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 2, GFLAGS),
 	COMPOSITE_NOMUX(0, "armcore3", "armclk", 0,
-			RK3288_CLKSEL_CON(36), 12, 3, DFLAGS,
+			RK3288_CLKSEL_CON(36), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 3, GFLAGS),
 	COMPOSITE_NOMUX(0, "l2ram", "armclk", 0,
-			RK3288_CLKSEL_CON(37), 0, 3, DFLAGS,
+			RK3288_CLKSEL_CON(37), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 4, GFLAGS),
 	COMPOSITE_NOMUX(0, "aclk_core_m0", "armclk", 0,
-			RK3288_CLKSEL_CON(0), 0, 4, DFLAGS,
+			RK3288_CLKSEL_CON(0), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 5, GFLAGS),
 	COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", 0,
-			RK3288_CLKSEL_CON(0), 4, 4, DFLAGS,
+			RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 6, GFLAGS),
 	COMPOSITE_NOMUX(0, "atclk", "armclk", 0,
-			RK3288_CLKSEL_CON(37), 4, 5, DFLAGS,
+			RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 7, GFLAGS),
 	COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", 0,
-			RK3288_CLKSEL_CON(37), 9, 5, DFLAGS,
+			RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 8, GFLAGS),
 	GATE(0, "pclk_dbg", "pclk_dbg_pre", 0,
 			RK3288_CLKGATE_CON(12), 9, GFLAGS),
Signature · 1 line
2.1.0
author maintainer
#6 lore raw

PATCH v4 6/8 clk: rockchip: add new clock-type for the cpuclk

In reply to Heiko Stuebner

When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate.

Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers.

---
 drivers/clk/rockchip/Makefile  |   1 +
 drivers/clk/rockchip/clk-cpu.c | 329 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/rockchip/clk.c     |  20 +++
 drivers/clk/rockchip/clk.h     |  36 +++++
 4 files changed, 386 insertions(+)
 create mode 100644 drivers/clk/rockchip/clk-cpu.c
drivers/clk/rockchip/Makefile +1 -0
index ee6b077..bd8514d 100644
@@ -5,6 +5,7 @@
 obj-y	+= clk-rockchip.o
 obj-y	+= clk.o
 obj-y	+= clk-pll.o
+obj-y	+= clk-cpu.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
 obj-y	+= clk-rk3188.o
drivers/clk/rockchip/clk-cpu.c new file +329 -0

329 lines not on this page · raw message

drivers/clk/rockchip/clk.c +20 -0
index d9c6db2..d005558 100644
@@ -297,6 +297,26 @@ void __init rockchip_clk_register_branches(
 	}
 }
 
+void __init rockchip_clk_register_armclk(unsigned int lookup_id,
+			const char *name, const char **parent_names,
+			u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			struct rockchip_cpuclk_rate_table *rates, int nrates)
+{
+	struct clk *clk;
+
+	clk = rockchip_clk_register_cpuclk(name, parent_names, num_parents,
+					   reg_data, rates, nrates, reg_base,
+					   &clk_lock);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register clock %s: %ld\n",
+		       __func__, name, PTR_ERR(clk));
+		return;
+	}
+
+	rockchip_clk_add_lookup(clk, lookup_id);
+}
+
 void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks)
 {
 	int i;
drivers/clk/rockchip/clk.h +36 -0
index 2b0bca1..d45ccab 100644
@@ -120,6 +120,38 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 		struct rockchip_pll_rate_table *rate_table,
 		spinlock_t *lock);
 
+struct rockchip_cpuclk_clksel {
+	int reg;
+	u32 val;
+};
+
+#define ROCKCHIP_CPUCLK_NUM_DIVIDERS	2
+struct rockchip_cpuclk_rate_table {
+	unsigned long prate;
+	struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS];
+};
+
+/**
+ * struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock
+ * @core_reg:		register offset of the core settings register
+ * @div_core_shift:	core divider offset used to divide the pll value
+ * @div_core_mask:	core divider mask
+ * @mux_core_shift:	offset of the core multiplexer
+ */
+struct rockchip_cpuclk_reg_data {
+	int		core_reg;
+	u8		div_core_shift;
+	u32		div_core_mask;
+	int		mux_core_reg;
+	u8		mux_core_shift;
+};
+
+struct clk *rockchip_clk_register_cpuclk(const char *name,
+			const char **parent_names, u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			struct rockchip_cpuclk_rate_table *rates, int nrates,
+			void __iomem *reg_base, spinlock_t *lock);
+
 #define PNAME(x) static const char *x[] __initconst
 
 enum rockchip_clk_branch_type {
@@ -329,6 +361,10 @@ void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list,
 				    unsigned int nr_clk);
 void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list,
 				unsigned int nr_pll, int grf_lock_offset);
+void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name,
+			const char **parent_names, u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			struct rockchip_cpuclk_rate_table *rates, int nrates);
 void rockchip_clk_protect_critical(const char *clocks[], int nclocks);
 
 #define ROCKCHIP_SOFTRST_HIWORD_MASK	BIT(0)
Signature · 1 line
2.1.0
#7 lore raw

PATCH v4 6/8 clk: rockchip: add new clock-type for the cpuclk

Heiko,

drivers/clk/rockchip/clk-cpu.c line 234

Quoted 4 lines · Heiko Stuebner
drivers/clk/rockchip/clk-cpu.c new file +4 -0
+struct clk *rockchip_clk_register_cpuclk(const char *name,
+                       const char **parent_names, u8 num_parents,
+                       const struct rockchip_cpuclk_reg_data *reg_data,
+                       struct rockchip_cpuclk_rate_table *rates, int nrates,

It would be nice if this was "const struct rockchip_cpuclk rate_table *rates" here and elsewhere. It's OK if we make it const here even if we can't figure out how to make the tables "initconst".

...but it sure seems like that could happen in a followup patch, so:

On a rk3288-board:

author maintainer
#8 lore raw

PATCH v4 6/8 clk: rockchip: add new clock-type for the cpuclk

In reply to Heiko Stuebner

When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate.

Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers.

On a rk3288-board:

---
changes since v4:
- make rate table params const, suggested by Doug Anderson

 drivers/clk/rockchip/Makefile  |   1 +
 drivers/clk/rockchip/clk-cpu.c | 329 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/rockchip/clk.c     |  20 +++
 drivers/clk/rockchip/clk.h     |  36 +++++
 4 files changed, 386 insertions(+)
 create mode 100644 drivers/clk/rockchip/clk-cpu.c
drivers/clk/rockchip/Makefile +1 -0
index ee6b077..bd8514d 100644
@@ -5,6 +5,7 @@
 obj-y	+= clk-rockchip.o
 obj-y	+= clk.o
 obj-y	+= clk-pll.o
+obj-y	+= clk-cpu.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
 obj-y	+= clk-rk3188.o
drivers/clk/rockchip/clk-cpu.c new file +329 -0

329 lines not on this page · raw message

drivers/clk/rockchip/clk.c +20 -0
index d9c6db2..d005558 100644
@@ -297,6 +297,26 @@ void __init rockchip_clk_register_branches(
 	}
 }
 
+void __init rockchip_clk_register_armclk(unsigned int lookup_id,
+			const char *name, const char **parent_names,
+			u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			struct rockchip_cpuclk_rate_table *rates, int nrates)
+{
+	struct clk *clk;
+
+	clk = rockchip_clk_register_cpuclk(name, parent_names, num_parents,
+					   reg_data, rates, nrates, reg_base,
+					   &clk_lock);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register clock %s: %ld\n",
+		       __func__, name, PTR_ERR(clk));
+		return;
+	}
+
+	rockchip_clk_add_lookup(clk, lookup_id);
+}
+
 void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks)
 {
 	int i;
drivers/clk/rockchip/clk.h +36 -0
index 2b0bca1..d45ccab 100644
@@ -120,6 +120,38 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 		struct rockchip_pll_rate_table *rate_table,
 		spinlock_t *lock);
 
+struct rockchip_cpuclk_clksel {
+	int reg;
+	u32 val;
+};
+
+#define ROCKCHIP_CPUCLK_NUM_DIVIDERS	2
+struct rockchip_cpuclk_rate_table {
+	unsigned long prate;
+	struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS];
+};
+
+/**
+ * struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock
+ * @core_reg:		register offset of the core settings register
+ * @div_core_shift:	core divider offset used to divide the pll value
+ * @div_core_mask:	core divider mask
+ * @mux_core_shift:	offset of the core multiplexer
+ */
+struct rockchip_cpuclk_reg_data {
+	int		core_reg;
+	u8		div_core_shift;
+	u32		div_core_mask;
+	int		mux_core_reg;
+	u8		mux_core_shift;
+};
+
+struct clk *rockchip_clk_register_cpuclk(const char *name,
+			const char **parent_names, u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			struct rockchip_cpuclk_rate_table *rates, int nrates,
+			void __iomem *reg_base, spinlock_t *lock);
+
 #define PNAME(x) static const char *x[] __initconst
 
 enum rockchip_clk_branch_type {
@@ -329,6 +361,10 @@ void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list,
 				    unsigned int nr_clk);
 void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list,
 				unsigned int nr_pll, int grf_lock_offset);
+void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name,
+			const char **parent_names, u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			struct rockchip_cpuclk_rate_table *rates, int nrates);
 void rockchip_clk_protect_critical(const char *clocks[], int nclocks);
 
 #define ROCKCHIP_SOFTRST_HIWORD_MASK	BIT(0)
Signature · 1 line
2.1.0
author maintainer
#9 lore raw

PATCH v4 6/8 clk: rockchip: add new clock-type for the cpuclk

When changing the armclk on Rockchip SoCs it is supposed to be reparented to an alternate parent before changing the underlying pll and back after the change. Additionally there exist clocks that are very tightly bound to the armclk whose divider values are set according to the armclk rate.

Add a special clock-type to handle all that. The rate table and divider values will be supplied from the soc-specific clock controllers.

On a rk3288-board:

---
changes since v4.1:
- fix "forgot git add" - really add the const sorry about that
changes since v4:
- make rate table params const, suggested by Doug Anderson

 drivers/clk/rockchip/Makefile  |   1 +
 drivers/clk/rockchip/clk-cpu.c | 329 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/rockchip/clk.c     |  21 +++
 drivers/clk/rockchip/clk.h     |  37 +++++
 4 files changed, 388 insertions(+)
 create mode 100644 drivers/clk/rockchip/clk-cpu.c
drivers/clk/rockchip/Makefile +1 -0
index ee6b077..bd8514d 100644
@@ -5,6 +5,7 @@
 obj-y	+= clk-rockchip.o
 obj-y	+= clk.o
 obj-y	+= clk-pll.o
+obj-y	+= clk-cpu.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
 obj-y	+= clk-rk3188.o
drivers/clk/rockchip/clk-cpu.c new file +329 -0

329 lines not on this page · raw message

drivers/clk/rockchip/clk.c +21 -0
index d9c6db2..fd3b5ef 100644
@@ -297,6 +297,27 @@ void __init rockchip_clk_register_branches(
 	}
 }
 
+void __init rockchip_clk_register_armclk(unsigned int lookup_id,
+			const char *name, const char **parent_names,
+			u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			const struct rockchip_cpuclk_rate_table *rates,
+			int nrates)
+{
+	struct clk *clk;
+
+	clk = rockchip_clk_register_cpuclk(name, parent_names, num_parents,
+					   reg_data, rates, nrates, reg_base,
+					   &clk_lock);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register clock %s: %ld\n",
+		       __func__, name, PTR_ERR(clk));
+		return;
+	}
+
+	rockchip_clk_add_lookup(clk, lookup_id);
+}
+
 void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks)
 {
 	int i;
drivers/clk/rockchip/clk.h +37 -0
index 2b0bca1..f4791fb 100644
@@ -120,6 +120,38 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type,
 		struct rockchip_pll_rate_table *rate_table,
 		spinlock_t *lock);
 
+struct rockchip_cpuclk_clksel {
+	int reg;
+	u32 val;
+};
+
+#define ROCKCHIP_CPUCLK_NUM_DIVIDERS	2
+struct rockchip_cpuclk_rate_table {
+	unsigned long prate;
+	struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS];
+};
+
+/**
+ * struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock
+ * @core_reg:		register offset of the core settings register
+ * @div_core_shift:	core divider offset used to divide the pll value
+ * @div_core_mask:	core divider mask
+ * @mux_core_shift:	offset of the core multiplexer
+ */
+struct rockchip_cpuclk_reg_data {
+	int		core_reg;
+	u8		div_core_shift;
+	u32		div_core_mask;
+	int		mux_core_reg;
+	u8		mux_core_shift;
+};
+
+struct clk *rockchip_clk_register_cpuclk(const char *name,
+			const char **parent_names, u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			const struct rockchip_cpuclk_rate_table *rates,
+			int nrates, void __iomem *reg_base, spinlock_t *lock);
+
 #define PNAME(x) static const char *x[] __initconst
 
 enum rockchip_clk_branch_type {
@@ -329,6 +361,11 @@ void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list,
 				    unsigned int nr_clk);
 void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list,
 				unsigned int nr_pll, int grf_lock_offset);
+void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name,
+			const char **parent_names, u8 num_parents,
+			const struct rockchip_cpuclk_reg_data *reg_data,
+			const struct rockchip_cpuclk_rate_table *rates,
+			int nrates);
 void rockchip_clk_protect_critical(const char *clocks[], int nclocks);
 
 #define ROCKCHIP_SOFTRST_HIWORD_MASK	BIT(0)
Signature · 1 line
2.1.0
author maintainer
#10 lore raw

PATCH v4 7/8 clk: rockchip: add binding id for ARMCLK

In reply to Heiko Stuebner
---
 include/dt-bindings/clock/rk3188-cru-common.h | 1 +
 include/dt-bindings/clock/rk3288-cru.h        | 1 +
 2 files changed, 2 insertions(+)
include/dt-bindings/clock/rk3188-cru-common.h +1 -0
index 750ee60..6a37050 100644
@@ -20,6 +20,7 @@
 #define PLL_GPLL		4
 #define CORE_PERI		5
 #define CORE_L2C		6
+#define ARMCLK			7
 
 /* sclk gates (special clocks) */
 #define SCLK_UART0		64
include/dt-bindings/clock/rk3288-cru.h +1 -0
index 750e558..100a08c 100644
@@ -19,6 +19,7 @@
 #define PLL_CPLL		3
 #define PLL_GPLL		4
 #define PLL_NPLL		5
+#define ARMCLK			6
 
 /* sclk gates (special clocks) */
 #define SCLK_GPU		64
Signature · 1 line
2.1.0
author maintainer
#11 lore raw

PATCH v4 8/8 clk: rockchip: switch to using the new cpuclk type for armclk

In reply to Heiko Stuebner

This adds the necessary soc-specific divider values and switches the armclk to use the newly introduced cpuclk type.

---
 drivers/clk/rockchip/clk-rk3188.c | 104 ++++++++++++++++++++++++++++++++++++--
 drivers/clk/rockchip/clk-rk3288.c |  71 +++++++++++++++++++++++++-
 2 files changed, 169 insertions(+), 6 deletions(-)
drivers/clk/rockchip/clk-rk3188.c +100 -4
index adfbfef..ceabce5 100644
@@ -101,6 +101,98 @@ struct rockchip_pll_rate_table rk3188_pll_rates[] = {
 	{ /* sentinel */ },
 };
 
+#define RK3066_DIV_CORE_PERIPH_MASK	0x3
+#define RK3066_DIV_CORE_PERIPH_SHIFT	6
+#define RK3066_DIV_ACLK_CORE_MASK	0x7
+#define RK3066_DIV_ACLK_CORE_SHIFT	0
+#define RK3066_DIV_ACLK_HCLK_MASK	0x3
+#define RK3066_DIV_ACLK_HCLK_SHIFT	8
+#define RK3066_DIV_ACLK_PCLK_MASK	0x3
+#define RK3066_DIV_ACLK_PCLK_SHIFT	12
+#define RK3066_DIV_AHB2APB_MASK		0x3
+#define RK3066_DIV_AHB2APB_SHIFT	14
+
+#define RK3066_CLKSEL0(_core_peri)					\
+	{								\
+		.reg = RK2928_CLKSEL_CON(0),				\
+		.val = HIWORD_UPDATE(_core_peri, RK3066_DIV_CORE_PERIPH_MASK, \
+				RK3066_DIV_CORE_PERIPH_SHIFT)		\
+	}
+#define RK3066_CLKSEL1(_aclk_core, _aclk_hclk, _aclk_pclk, _ahb2apb)	\
+	{								\
+		.reg = RK2928_CLKSEL_CON(1),				\
+		.val = HIWORD_UPDATE(_aclk_core, RK3066_DIV_ACLK_CORE_MASK, \
+				RK3066_DIV_ACLK_CORE_SHIFT) |		\
+		       HIWORD_UPDATE(_aclk_hclk, RK3066_DIV_ACLK_HCLK_MASK, \
+				RK3066_DIV_ACLK_HCLK_SHIFT) |		\
+		       HIWORD_UPDATE(_aclk_pclk, RK3066_DIV_ACLK_PCLK_MASK, \
+				RK3066_DIV_ACLK_PCLK_SHIFT) |		\
+		       HIWORD_UPDATE(_ahb2apb, RK3066_DIV_AHB2APB_MASK,	\
+				RK3066_DIV_AHB2APB_SHIFT),		\
+	}
+
+#define RK3066_CPUCLK_RATE(_prate, _core_peri, _acore, _ahclk, _apclk, _h2p) \
+	{								\
+		.prate = _prate,					\
+		.divs = {						\
+			RK3066_CLKSEL0(_core_peri),			\
+			RK3066_CLKSEL1(_acore, _ahclk, _apclk, _h2p),	\
+		},							\
+	}
+
+static struct rockchip_cpuclk_rate_table rk3066_cpuclk_rates[] __initdata = {
+	RK3066_CPUCLK_RATE(1416000000, 2, 3, 1, 2, 1),
+	RK3066_CPUCLK_RATE(1200000000, 2, 3, 1, 2, 1),
+	RK3066_CPUCLK_RATE(1008000000, 2, 2, 1, 2, 1),
+	RK3066_CPUCLK_RATE( 816000000, 2, 2, 1, 2, 1),
+	RK3066_CPUCLK_RATE( 600000000, 1, 2, 1, 2, 1),
+	RK3066_CPUCLK_RATE( 504000000, 1, 1, 1, 2, 1),
+	RK3066_CPUCLK_RATE( 312000000, 0, 1, 1, 1, 0),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3066_cpuclk_data = {
+	.core_reg = RK2928_CLKSEL_CON(0),
+	.div_core_shift = 0,
+	.div_core_mask = 0x1f,
+	.mux_core_shift = 8,
+};
+
+#define RK3188_DIV_ACLK_CORE_MASK	0x7
+#define RK3188_DIV_ACLK_CORE_SHIFT	3
+
+#define RK3188_CLKSEL1(_aclk_core)		\
+	{					\
+		.reg = RK2928_CLKSEL_CON(1),	\
+		.val = HIWORD_UPDATE(_aclk_core, RK3188_DIV_ACLK_CORE_MASK,\
+				 RK3188_DIV_ACLK_CORE_SHIFT) \
+	}
+#define RK3188_CPUCLK_RATE(_prate, _core_peri, _aclk_core)	\
+	{							\
+		.prate = _prate,				\
+		.divs = {					\
+			RK3066_CLKSEL0(_core_peri),		\
+			RK3188_CLKSEL1(_aclk_core),		\
+		},						\
+	}
+
+static struct rockchip_cpuclk_rate_table rk3188_cpuclk_rates[] __initdata = {
+	RK3188_CPUCLK_RATE(1608000000, 2, 3),
+	RK3188_CPUCLK_RATE(1416000000, 2, 3),
+	RK3188_CPUCLK_RATE(1200000000, 2, 3),
+	RK3188_CPUCLK_RATE(1008000000, 2, 3),
+	RK3188_CPUCLK_RATE( 816000000, 2, 3),
+	RK3188_CPUCLK_RATE( 600000000, 1, 3),
+	RK3188_CPUCLK_RATE( 504000000, 1, 3),
+	RK3188_CPUCLK_RATE( 312000000, 0, 1),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3188_cpuclk_data = {
+	.core_reg = RK2928_CLKSEL_CON(0),
+	.div_core_shift = 9,
+	.div_core_mask = 0x1f,
+	.mux_core_shift = 8,
+};
+
 PNAME(mux_pll_p)		= { "xin24m", "xin32k" };
 PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
 PNAME(mux_ddrphy_p)		= { "dpll", "gpll_ddr" };
@@ -406,8 +498,6 @@ static struct clk_div_table div_aclk_cpu_t[] = {
 };
 
 static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = {
-	COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0,
-			RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 0, 5, DFLAGS),
 	DIVTBL(0, "aclk_cpu_pre", "armclk", 0,
 			RK2928_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_aclk_cpu_t),
 	DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0,
@@ -528,8 +618,6 @@ PNAME(mux_hsicphy_p)		= { "sclk_otgphy0", "sclk_otgphy1",
 				    "gpll", "cpll" };
 
 static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = {
-	COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0,
-			RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 9, 5, DFLAGS),
 	COMPOSITE_NOMUX_DIVTBL(0, "aclk_core", "armclk", 0,
 			RK2928_CLKSEL_CON(1), 3, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			div_rk3188_aclk_core_t, RK2928_CLKGATE_CON(0), 7, GFLAGS),
@@ -657,6 +745,10 @@ static void __init rk3066a_clk_init(struct device_node *np)
 				   RK3066_GRF_SOC_STATUS);
 	rockchip_clk_register_branches(rk3066a_clk_branches,
 				  ARRAY_SIZE(rk3066a_clk_branches));
+	rockchip_clk_register_armclk(ARMCLK, "armclk",
+			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+			&rk3066_cpuclk_data, rk3066_cpuclk_rates,
+			ARRAY_SIZE(rk3066_cpuclk_rates));
 }
 CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init);
 
@@ -672,6 +764,10 @@ static void __init rk3188a_clk_init(struct device_node *np)
 				   RK3188_GRF_SOC_STATUS);
 	rockchip_clk_register_branches(rk3188_clk_branches,
 				  ARRAY_SIZE(rk3188_clk_branches));
+	rockchip_clk_register_armclk(ARMCLK, "armclk",
+				  mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+				  &rk3188_cpuclk_data, rk3188_cpuclk_rates,
+				  ARRAY_SIZE(rk3188_cpuclk_rates));
 
 	/* reparent aclk_cpu_pre from apll */
 	clk1 = __clk_lookup("aclk_cpu_pre");
drivers/clk/rockchip/clk-rk3288.c +69 -2

89 lines not on this page · raw message

Signature · 1 line
2.1.0
#12 lore raw

v4 cover ARM: rockchip: add cpuclk handling - clock-tree part

In reply to Heiko Stuebner

Quoting Heiko Stuebner (2014-09-26 11:53:03)

Quoted 13 lines

This series implements cpu frequency-scaling for Rockchip SoCs. The whole handling of the armclk frequency changes and therefore the implementention is very similar to the recent series for Samsung SoCs from Thomas Abraham.

Tested on a
- rk3066 Marsboard
- rk3188 Radxa Rock
- rk3288 Evaluation board

This is the part that would go through the clock tree and the patches are build against current clk-next.

Quoted 6 lines

-------
On the arm-soc side we would need the ARMCLK id in an exported branch from the clk tree so that the devicetree changes can use this new id. But as 3.17 is supposed to be released this weekend, the devicetree parts will maybe have to wait for 3.18-rc1 in any case.
-------

Series looks good to me. It seems like more rockchip clk patches are starting to flow in so it would be nice to set up pull requests for those. Heiko is listed as the maintainer, so I guess he will send them?

Thanks!
Mike

Quoted 49 lines

The series also is split, as clk-next and the arm-soc parts have diverged so much, that it's not possible to create one series against one tree and stay sane.

changes since v3:
- address more comments from Doug Anderson:
main change setting the dividers in the post_rate callback
- use __initdata for the rate tables
While it could use __initconst the current code causes a section type conflict with something else, so this could possibly be solved at a later time
changes since v2:
- add patch removing the pll clk-notifier
- in cpuclk do parent change and alt_div setting in one go changes since v1:
- address comments received concerning smaller issues
- split series into two, one for clk-next and one for arm-soc

Doug Anderson (1):
clk: rockchip: change pll rate without a clk-notifier

Heiko Stuebner (6):
clk: rockchip: fix rk3066 pll status register location
clk: rockchip: reparent aclk_cpu_pre to the gpll
clk: rockchip: make tightly bound armclk child-clocks read-only
clk: rockchip: add new clock-type for the cpuclk
clk: rockchip: add binding id for ARMCLK
clk: rockchip: switch to using the new cpuclk type for armclk

Jianqun (1):
clk: rockchip: fix rk3288 pll status register location

 drivers/clk/rockchip/Makefile                 |   1 +
 drivers/clk/rockchip/clk-cpu.c                | 329 ++++++++++++++++++++++++++
 drivers/clk/rockchip/clk-pll.c                |  63 +----
 drivers/clk/rockchip/clk-rk3188.c             | 161 +++++++++++--
 drivers/clk/rockchip/clk-rk3288.c             |  93 +++++++-
 drivers/clk/rockchip/clk.c                    |  20 ++
 drivers/clk/rockchip/clk.h                    |  36 +++
 include/dt-bindings/clock/rk3188-cru-common.h |   1 +
 include/dt-bindings/clock/rk3288-cru.h        |   1 +
 9 files changed, 627 insertions(+), 78 deletions(-)
 create mode 100644 drivers/clk/rockchip/clk-cpu.c
Signature · 1 line
2.1.0