Skip to contentSkip to conversation

USB: serial: cp210x: Add Silicon Labs 358x VID and PID.

PATCH In review Nathaniel Ting 2 participants 2 messages Oct 2, 2014

Subsystems (2)
USB USB serial
lore
Share & tools
lore

Nathaniel Ting

author
#0 lore raw

PATCH 1/1 USB: serial: cp210x: Add Silicon Labs 358x VID and PID.

From: Nathaniel Ting <[email protected]>

Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now connect to host PCs over a USB serial link.

Signed-off-by Nathaniel Ting <[email protected]>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/serial/cp210x.c +1 -0
index e4bb622..ce81fa8 100644
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
     { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
     { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
     { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+        { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
     { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
     { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
     { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */

-- 1.9.1

maintainer
#1 lore raw
Quoted 16 lines · Nathaniel Ting

From: Nathaniel Ting <[email protected]>

Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now connect to host PCs over a USB serial link.

Signed-off-by Nathaniel Ting <[email protected]>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)
drivers/usb/serial/cp210x.c +0 -0
index e4bb622..ce81fa8 100644

drivers/usb/serial/cp210x.c static const struct usb_device_id id_table[] = { · line 157

Quoted 4 lines
drivers/usb/serial/cp210x.c +1 -0
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
     { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
     { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
     { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+        { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */

Your whitespace is corrupted here, making the patch impossible to apply :(