i2c: hix5hd2: add i2c controller driver

new file mode 100644
index 0000000..660b7ba
@@ -0,0 +1,25 @@
+I2C for Hisilicon hix5hd2 chipset platform
+
+Required properties:
+- compatible: Must be "hisilicon,hix5hd2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- Child nodes conforming to i2c bus binding
+
+Examples:
+I2C0 at f8b10000 {
+	compatible = "hisilicon,hix5hd2-i2c";
+	reg = <0xf8b10000 0x1000>;
+	interrupts = <0 38 4>;
+	clocks = <&clock HIX5HD2_I2C0_RST>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+}

index 2ac87fa..2ef671f 100644
@@ -77,6 +77,16 @@ config I2C_AMD8111
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-amd8111.
 
+config I2C_HIX5HD2
+	tristate "Hix5hd2 high-speed I2C driver"
+	depends on ARCH_HIX5HD2 || COMPILE_TEST
+	help
+	  Say Y here to include support for high-speed I2C controller in the
+	  Hisilicon based hix5hd2 SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-hix5hd2.
+
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI

index 49bf07e..9739938 100644
@@ -47,6 +47,7 @@ obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
+obj-$(CONFIG_I2C_HIX5HD2)	+= i2c-hix5hd2.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o

index d3d99fb..17d0637 100644
@@ -476,5 +476,65 @@
                         interrupts = <0 70 4>;
                         clocks = <&clock HIX5HD2_SATA_CLK>;
 		};
+
+		i2c0: i2c at b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb10000 0x1000>;
+			interrupts = <0 38 4>;
+			clocks = <&clock HIX5HD2_I2C0_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb11000 0x1000>;
+			interrupts = <0 39 4>;
+			clocks = <&clock HIX5HD2_I2C1_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c at b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb12000 0x1000>;
+			interrupts = <0 40 4>;
+			clocks = <&clock HIX5HD2_I2C2_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c at b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb13000 0x1000>;
+			interrupts = <0 41 4>;
+			clocks = <&clock HIX5HD2_I2C3_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c at b16000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb16000 0x1000>;
+			interrupts = <0 43 4>;
+			clocks = <&clock HIX5HD2_I2C4_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c at b17000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb17000 0x1000>;
+			interrupts = <0 44 4>;
+			clocks = <&clock HIX5HD2_I2C5_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 	};
 };