u-boot-usb/master

The following changes since commit b966db0d7259293e2c9c216c7a5dce30dacacfd9:

dw_mmc: cleanups (2014-10-03 17:26:50 +0300)

are available in the git repository at:

git://git.denx.de/u-boot-usb.git master

for you to fetch changes up to d1fcbae1173f00917f5a71e4c074a61120605021:

usb: tegra: ULPI regression on tegra20 (2014-10-06 16:12:48 +0200)

----------------------------------------------------------------
Bo Shen (1):
usb: gadget: fastboot: improve download progress bar

Eric Nelson (4):
usb: f_mass_storage: set removable flag in do_inquiry based on LUN
usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED
usb: gadget: fastboot: add max-download-size variable
usb: gadget: fastboot: explicitly set radix of maximum download size

Hans de Goede (10):
usb: ehci: Properly set hub devnum and portnr with usb-1 hubs in the chain
usb: ehci: Add missing cache flush to destroy_int_queue
usb: ehci: poll_int_queue check real qtd, not the overlay
usb: ehci: Make periodic_schedules a per controller variable
usb: kbd: Fix unaligned buffer usage in usb_kbd_setled()
usb: kbd: Do not treat -ENODEV as an error for usb_kbd_deregister
usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling
usb_stop()
usb: kbd: Remove check for already being registered
stdio: Add force parameter to stdio_deregister
usb: kbd: Allow "usb reset" to continue when an usb kbd is used

Heiko Schocher (2):
usb: dfu: add fullspeed support for DFU
arm: am335x: siemens board use in DFU mode fullspeed only

Marcel Ziswiler (1):
usb: tegra: ULPI regression on tegra20

?ukasz Majewski (1):
usb: dfu: thor: gadget: Remove dead code

 common/cmd_usb.c                       | 27 +++++++++++++++------------
 common/stdio.c                         | 13 ++++++++++---
 common/usb_kbd.c                       | 26 +++++++++++---------------
 drivers/serial/serial-uclass.c         |  2 +-
 drivers/usb/gadget/ci_udc.c            |  5 +++++
 drivers/usb/gadget/f_dfu.c             | 11 +++--------
 drivers/usb/gadget/f_fastboot.c        | 19 ++++++++++++-------
 drivers/usb/gadget/f_mass_storage.c    |  1 +
 drivers/usb/gadget/f_thor.c            | 10 ----------
 drivers/usb/host/ehci-hcd.c            | 65 
++++++++++++++++++++++++++++++++++++++++++++---------------------
 drivers/usb/host/ehci-tegra.c          |  4 ++--
 drivers/usb/host/ehci.h                |  1 +
 include/configs/siemens-am33x-common.h |  2 +-
 include/stdio_dev.h                    |  4 ++--
 include/usb.h                          |  2 +-
 15 files changed, 109 insertions(+), 83 deletions(-)

Updated PR, added a Fastboot fix and the musb-new fix:

The following changes since commit b966db0d7259293e2c9c216c7a5dce30dacacfd9:

dw_mmc: cleanups (2014-10-03 17:26:50 +0300)

are available in the git repository at:

git://git.denx.de/u-boot-usb.git master

for you to fetch changes up to e2140588dd2f3e619f21d9575281b7c7ea771c09:

usb: gadget: fastboot: terminate commands with NULL (2014-10-06 21:07:44
+0200)

----------------------------------------------------------------
Bo Shen (1):
usb: gadget: fastboot: improve download progress bar

Daniel Mack (1):
usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host mode

Eric Nelson (5):
usb: f_mass_storage: set removable flag in do_inquiry based on LUN
usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEED
usb: gadget: fastboot: add max-download-size variable
usb: gadget: fastboot: explicitly set radix of maximum download size
usb: gadget: fastboot: terminate commands with NULL

Hans de Goede (10):
usb: ehci: Properly set hub devnum and portnr with usb-1 hubs in the chain
usb: ehci: Add missing cache flush to destroy_int_queue
usb: ehci: poll_int_queue check real qtd, not the overlay
usb: ehci: Make periodic_schedules a per controller variable
usb: kbd: Fix unaligned buffer usage in usb_kbd_setled()
usb: kbd: Do not treat -ENODEV as an error for usb_kbd_deregister
usb: kbd: On a "usb reset" call usb_kbd_deregister() before calling
usb_stop()
usb: kbd: Remove check for already being registered
stdio: Add force parameter to stdio_deregister
usb: kbd: Allow "usb reset" to continue when an usb kbd is used

Heiko Schocher (2):
usb: dfu: add fullspeed support for DFU
arm: am335x: siemens board use in DFU mode fullspeed only

Marcel Ziswiler (1):
usb: tegra: ULPI regression on tegra20

?ukasz Majewski (1):
usb: dfu: thor: gadget: Remove dead code

 common/cmd_usb.c                       | 27 +++++++++++++++------------
 common/stdio.c                         | 13 ++++++++++---
 common/usb_kbd.c                       | 26 +++++++++++---------------
 drivers/serial/serial-uclass.c         |  2 +-
 drivers/usb/gadget/ci_udc.c            |  5 +++++
 drivers/usb/gadget/f_dfu.c             | 11 +++--------
 drivers/usb/gadget/f_fastboot.c        | 28 ++++++++++++++++++++--------
 drivers/usb/gadget/f_mass_storage.c    |  1 +
 drivers/usb/gadget/f_thor.c            | 10 ----------
 drivers/usb/host/ehci-hcd.c            | 65 
++++++++++++++++++++++++++++++++++++++++++++---------------------
 drivers/usb/host/ehci-tegra.c          |  4 ++--
 drivers/usb/host/ehci.h                |  1 +
 drivers/usb/musb-new/musb_core.c       |  2 --
 include/configs/siemens-am33x-common.h |  2 +-
 include/stdio_dev.h                    |  4 ++--
 include/usb.h                          |  2 +-
 16 files changed, 117 insertions(+), 86 deletions(-)

Applied to u-boot/master, thanks!

Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141006/d4860e54/attachment.pgp>