staging: comedi: usbdux: updated contact details / comments
Subsystems (2)
PATCH 2/3 staging: comedi: usbdux: updated contact details / comments
I've updated my contact details and removed obsolete comments.
Signed-off-by Bernd Porr <[email protected]>
--- drivers/staging/comedi/drivers/usbdux.c | 59 ++++++++++++++++----------------- 1 file changed, 28 insertions(+), 31 deletions(-)
drivers/staging/comedi/drivers/usbdux.c +28 -31
@@ -1,37 +1,34 @@/* -comedi/drivers/usbdux.c -Copyright (C) 2003-2007 Bernd Porr, [email protected] - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. +* usbdux.c +* Copyright (C) 2003-2014 Bernd Porr, [email protected] +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. + +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. */ +/* -Driver: usbdux -Description: University of Stirling USB DAQ & INCITE Technology Limited -Devices: [ITL] USB-DUX (usbdux.o) -Author: Bernd Porr <[email protected]> -Updated: 8 Dec 2008 -Status: Stable -Configuration options: -You have to upload firmware with the -i option. The -firmware is usually installed under /usr/share/usb or -/usr/local/share/usb or /lib/firmware. - -Connection scheme for the counter at the digital port: -0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1. -The sampling rate of the counter is approximately 500Hz. - -Please note that under USB2.0 the length of the channel list determines -the max sampling rate. If you sample only one channel you get 8kHz -sampling rate. If you sample two channels you get 4kHz and so on. -*/ +* Driver: usbdux +* Description: University of Stirling USB DAQ & INCITE Technology Limited +* Devices: (ITL) USB-DUX [usbdux] +* Author: Bernd Porr <[email protected]> +* Updated: 10 Oct 2014 +* Status: Stable +* Connection scheme for the counter at the digital port: +* 0=/CLK0, 1=UP/DOWN0, 2=RESET0, 4=/CLK1, 5=UP/DOWN1, 6=RESET1. +* The sampling rate of the counter is approximately 500Hz. +* +* Note that under USB2.0 the length of the channel list determines +* the max sampling rate. If you sample only one channel you get 8kHz +* sampling rate. If you sample two channels you get 4kHz and so on. +*/ +/* * I must give credit here to Chris Baugher who * wrote the driver for AT-MIO-16d. I used some parts of this
Signature · 1 line
1.9.1
Quoted 6 lines · Bernd Porr
I've updated my contact details and removed obsolete comments.
Signed-off-by Bernd Porr <[email protected]>--- drivers/staging/comedi/drivers/usbdux.c | 59 ++++++++++++++++----------------- 1 file changed, 28 insertions(+), 31 deletions(-)
Reviewed-by Ian Abbott <[email protected]>
Signature · 2 lines
-=( Ian Abbott @ MEV Ltd. E-mail: <[email protected]> )=- -=( Web: http://www.mev.co.uk/ )=-
Quoted 4 lines · Bernd Porr
I've updated my contact details and removed obsolete comments.
Signed-off-by Bernd Porr <[email protected]>
Reviewed-by H Hartley Sweeten <[email protected]>