rtc-bq32000-add-trickle-charger-device-tree-binding.patch removed from -mm tree

The patch titled
Subject: rtc: bq32000: add trickle charger device tree binding
has been removed from the -mm tree. Its filename was
rtc-bq32000-add-trickle-charger-device-tree-binding.patch

This patch was dropped because it was merged into mainline or a subsystem tree

------------------------------------------------------
From: Pavel Machek <[email protected]>
Subject: rtc: bq32000: add trickle charger device tree binding

BQ32000 have "trickle chargers". Introduce a device tree binding for specifying the trickle charger configuration for that.

---

 Documentation/devicetree/bindings/i2c/ti,bq32k.txt |   18 +++++++++++
 1 file changed, 18 insertions(+)

diff -puN /dev/null Documentation/devicetree/bindings/i2c/ti,bq32k.txt
@@ -0,0 +1,18 @@
+* TI BQ32000                I2C Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "ti,bq32000".
+- reg: I2C address for chip
+
+Optional properties:
+- trickle-resistor-ohms : Selected resistor for trickle charger
+       Values usable are 1120 and 20180
+       Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+       Should be given if internal trickle charger diode should be disabled
+Example:
+       bq32000: rtc@68 {
+               compatible = "ti,bq32000";
+               trickle-resistor-ohms = <1120>;
+               reg = <0x68>;
+       };

_

Patches currently in -mm which might be from [email protected] are

origin.patch input-route-kbd-leds-through-the-generic-leds-layer.patch lib-vsprintf-add-%pt-format-specifier.patch linux-next.patch