Pre-EEPROM cleanup series
Subsystems (2)
cover Pre-EEPROM cleanup series
This patch series just scraps a couple of PPC boards and other EEPROM-related goodies, which were in the way of cleaning up cmd_eeprom.c . I decided to decouple this series from the eeprom-centric patches so this can go in separately with ease.
There is only one change from the previous patches, the doc/README.scrapyard was updated in each patch and there is a new patch which updates the previous records in the doc/README.scrapyard .
Marek Vasut (9):
doc: Update README.scrapyard
ppc: Zap ICU862 board
ppc: Zap MHPC board
ppc: Zap Hymod board
ppc: Zap HWW1U1A board
ppc: Zap IDS8247 board
ppc: Zap TQM8260 board
ppc: Zap TQM8272 board
arm: Zap tricorder-eeprom
arch/powerpc/cpu/mpc8260/Kconfig | 16 - arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +- arch/powerpc/cpu/mpc8260/interrupts.c | 10 +- arch/powerpc/cpu/mpc8260/pci.c | 2 - arch/powerpc/cpu/mpc8260/start.S | 14 - arch/powerpc/cpu/mpc83xx/start.S | 11 - arch/powerpc/cpu/mpc85xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/Kconfig | 8 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 2 - arch/powerpc/cpu/mpc8xx/fec.c | 40 +- arch/powerpc/include/asm/u-boot.h | 3 - board/corscience/tricorder/Makefile | 2 +- board/corscience/tricorder/tricorder-eeprom.c | 251 ------- board/corscience/tricorder/tricorder-eeprom.h | 41 -- board/eltec/mhpc/Kconfig | 12 - board/eltec/mhpc/MAINTAINERS | 6 - board/eltec/mhpc/Makefile | 8 - board/eltec/mhpc/flash.c | 414 ----------- board/eltec/mhpc/mhpc.c | 465 ------------- board/eltec/mhpc/u-boot.lds.debug | 121 ---- board/exmeritus/hww1u1a/Kconfig | 12 - board/exmeritus/hww1u1a/MAINTAINERS | 6 - board/exmeritus/hww1u1a/Makefile | 12 - board/exmeritus/hww1u1a/ddr.c | 34 - board/exmeritus/hww1u1a/gpios.h | 56 -- board/exmeritus/hww1u1a/hww1u1a.c | 268 -------- board/exmeritus/hww1u1a/law.c | 18 - board/exmeritus/hww1u1a/tlb.c | 90 --- board/hymod/Kconfig | 9 - board/hymod/MAINTAINERS | 6 - board/hymod/Makefile | 8 - board/hymod/bsp.c | 387 ----------- board/hymod/config.mk | 14 - board/hymod/eeprom.c | 678 ------------------ board/hymod/env.c | 221 ------ board/hymod/fetch.c | 91 --- board/hymod/flash.c | 490 ------------- board/hymod/flash.h | 140 ---- board/hymod/global_env | 145 ---- board/hymod/hymod.c | 521 -------------- board/hymod/hymod.h | 305 --------- board/hymod/input.c | 91 --- board/hymod/u-boot.lds | 132 ---- board/hymod/u-boot.lds.debug | 121 ---- board/icu862/Kconfig | 9 - board/icu862/MAINTAINERS | 7 - board/icu862/Makefile | 8 - board/icu862/flash.c | 575 ---------------- board/icu862/icu862.c | 199 ------ board/icu862/pcmcia.c | 262 ------- board/icu862/u-boot.lds | 82 --- board/icu862/u-boot.lds.debug | 122 ---- board/ids/ids8247/Kconfig | 12 - board/ids/ids8247/MAINTAINERS | 6 - board/ids/ids8247/Makefile | 11 - board/ids/ids8247/ids8247.c | 390 ----------- board/tqc/tqm8260/Kconfig | 12 - board/tqc/tqm8260/MAINTAINERS | 16 - board/tqc/tqm8260/Makefile | 8 - board/tqc/tqm8260/README | 415 ----------- board/tqc/tqm8260/tqm8260.c | 352 ---------- board/tqc/tqm8272/Kconfig | 12 - board/tqc/tqm8272/MAINTAINERS | 6 - board/tqc/tqm8272/Makefile | 8 - board/tqc/tqm8272/nand.c | 264 ------- board/tqc/tqm8272/tqm8272.c | 944 -------------------------- board/tqc/tqm8272/tqm8272.h | 37 - configs/HWW1U1A_defconfig | 3 - configs/ICU862_100MHz_defconfig | 4 - configs/ICU862_defconfig | 3 - configs/IDS8247_defconfig | 3 - configs/MHPC_defconfig | 3 - configs/TQM8255_AA_defconfig | 4 - configs/TQM8260_AA_defconfig | 4 - configs/TQM8260_AB_defconfig | 4 - configs/TQM8260_AC_defconfig | 4 - configs/TQM8260_AD_defconfig | 4 - configs/TQM8260_AE_defconfig | 4 - configs/TQM8260_AF_defconfig | 4 - configs/TQM8260_AG_defconfig | 4 - configs/TQM8260_AH_defconfig | 4 - configs/TQM8260_AI_defconfig | 4 - configs/TQM8265_AA_defconfig | 4 - configs/TQM8272_defconfig | 3 - configs/hymod_defconfig | 3 - doc/README.scrapyard | 23 +- include/asm-generic/u-boot.h | 3 - include/common.h | 3 - include/commproc.h | 32 - include/configs/HWW1U1A.h | 460 ------------- include/configs/ICU862.h | 443 ------------ include/configs/IDS8247.h | 462 ------------- include/configs/MHPC.h | 369 ---------- include/configs/TQM8260.h | 620 ----------------- include/configs/TQM8272.h | 735 -------------------- include/configs/hymod.h | 728 -------------------- include/pcmcia.h | 2 - include/status_led.h | 19 - tools/bddb/README | 116 ---- tools/bddb/badsubmit.php | 23 - tools/bddb/bddb.css | 207 ------ tools/bddb/brlog.php | 109 --- tools/bddb/browse.php | 147 ---- tools/bddb/config.php | 16 - tools/bddb/create_tables.sql | 90 --- tools/bddb/defs.php | 710 ------------------- tools/bddb/dodelete.php | 65 -- tools/bddb/dodellog.php | 57 -- tools/bddb/doedit.php | 186 ----- tools/bddb/doedlog.php | 76 --- tools/bddb/donew.php | 230 ------- tools/bddb/donewlog.php | 86 --- tools/bddb/edit.php | 131 ---- tools/bddb/edlog.php | 86 --- tools/bddb/execute.php | 33 - tools/bddb/index.php | 38 -- tools/bddb/new.php | 120 ---- tools/bddb/newlog.php | 54 -- 118 files changed, 19 insertions(+), 15595 deletions(-) delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h delete mode 100644 board/eltec/mhpc/Kconfig delete mode 100644 board/eltec/mhpc/MAINTAINERS delete mode 100644 board/eltec/mhpc/Makefile delete mode 100644 board/eltec/mhpc/flash.c delete mode 100644 board/eltec/mhpc/mhpc.c delete mode 100644 board/eltec/mhpc/u-boot.lds.debug delete mode 100644 board/exmeritus/hww1u1a/Kconfig delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS delete mode 100644 board/exmeritus/hww1u1a/Makefile delete mode 100644 board/exmeritus/hww1u1a/ddr.c delete mode 100644 board/exmeritus/hww1u1a/gpios.h delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c delete mode 100644 board/exmeritus/hww1u1a/law.c delete mode 100644 board/exmeritus/hww1u1a/tlb.c delete mode 100644 board/hymod/Kconfig delete mode 100644 board/hymod/MAINTAINERS delete mode 100644 board/hymod/Makefile delete mode 100644 board/hymod/bsp.c delete mode 100644 board/hymod/config.mk delete mode 100644 board/hymod/eeprom.c delete mode 100644 board/hymod/env.c delete mode 100644 board/hymod/fetch.c delete mode 100644 board/hymod/flash.c delete mode 100644 board/hymod/flash.h delete mode 100644 board/hymod/global_env delete mode 100644 board/hymod/hymod.c delete mode 100644 board/hymod/hymod.h delete mode 100644 board/hymod/input.c delete mode 100644 board/hymod/u-boot.lds delete mode 100644 board/hymod/u-boot.lds.debug delete mode 100644 board/icu862/Kconfig delete mode 100644 board/icu862/MAINTAINERS delete mode 100644 board/icu862/Makefile delete mode 100644 board/icu862/flash.c delete mode 100644 board/icu862/icu862.c delete mode 100644 board/icu862/pcmcia.c delete mode 100644 board/icu862/u-boot.lds delete mode 100644 board/icu862/u-boot.lds.debug delete mode 100644 board/ids/ids8247/Kconfig delete mode 100644 board/ids/ids8247/MAINTAINERS delete mode 100644 board/ids/ids8247/Makefile delete mode 100644 board/ids/ids8247/ids8247.c delete mode 100644 board/tqc/tqm8260/Kconfig delete mode 100644 board/tqc/tqm8260/MAINTAINERS delete mode 100644 board/tqc/tqm8260/Makefile delete mode 100644 board/tqc/tqm8260/README delete mode 100644 board/tqc/tqm8260/tqm8260.c delete mode 100644 board/tqc/tqm8272/Kconfig delete mode 100644 board/tqc/tqm8272/MAINTAINERS delete mode 100644 board/tqc/tqm8272/Makefile delete mode 100644 board/tqc/tqm8272/nand.c delete mode 100644 board/tqc/tqm8272/tqm8272.c delete mode 100644 board/tqc/tqm8272/tqm8272.h delete mode 100644 configs/HWW1U1A_defconfig delete mode 100644 configs/ICU862_100MHz_defconfig delete mode 100644 configs/ICU862_defconfig delete mode 100644 configs/IDS8247_defconfig delete mode 100644 configs/MHPC_defconfig delete mode 100644 configs/TQM8255_AA_defconfig delete mode 100644 configs/TQM8260_AA_defconfig delete mode 100644 configs/TQM8260_AB_defconfig delete mode 100644 configs/TQM8260_AC_defconfig delete mode 100644 configs/TQM8260_AD_defconfig delete mode 100644 configs/TQM8260_AE_defconfig delete mode 100644 configs/TQM8260_AF_defconfig delete mode 100644 configs/TQM8260_AG_defconfig delete mode 100644 configs/TQM8260_AH_defconfig delete mode 100644 configs/TQM8260_AI_defconfig delete mode 100644 configs/TQM8265_AA_defconfig delete mode 100644 configs/TQM8272_defconfig delete mode 100644 configs/hymod_defconfig delete mode 100644 include/configs/HWW1U1A.h delete mode 100644 include/configs/ICU862.h delete mode 100644 include/configs/IDS8247.h delete mode 100644 include/configs/MHPC.h delete mode 100644 include/configs/TQM8260.h delete mode 100644 include/configs/TQM8272.h delete mode 100644 include/configs/hymod.h delete mode 100644 tools/bddb/README delete mode 100644 tools/bddb/badsubmit.php delete mode 100644 tools/bddb/bddb.css delete mode 100644 tools/bddb/brlog.php delete mode 100644 tools/bddb/browse.php delete mode 100644 tools/bddb/config.php delete mode 100644 tools/bddb/create_tables.sql delete mode 100644 tools/bddb/defs.php delete mode 100644 tools/bddb/dodelete.php delete mode 100644 tools/bddb/dodellog.php delete mode 100644 tools/bddb/doedit.php delete mode 100644 tools/bddb/doedlog.php delete mode 100644 tools/bddb/donew.php delete mode 100644 tools/bddb/donewlog.php delete mode 100644 tools/bddb/edit.php delete mode 100644 tools/bddb/edlog.php delete mode 100644 tools/bddb/execute.php delete mode 100644 tools/bddb/index.php delete mode 100644 tools/bddb/new.php delete mode 100644 tools/bddb/newlog.php
Signature · 1 line
2.0.0
PATCH 1/9 doc: Update README.scrapyard
Fill in missing commit IDs and dates when the removal happened.
--- doc/README.scrapyard | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
doc/README.scrapyard +8 -8
@@ -12,14 +12,14 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -MVBC_P powerpc mpc5xxx - - Andre Schwarz <[email protected]> -MVSMR powerpc mpc5xxx - - Andre Schwarz <[email protected]> -MERGERBOX powerpc mpc83xx - - Andre Schwarz <[email protected]> -MVBLM7 powerpc mpc83xx - - Andre Schwarz <[email protected]> -bluestone powerpc ppc4xx - - Tirumala Marri <[email protected]> -CRAYL1 powerpc ppc4xx - - David Updegraff <[email protected]> -KAREF powerpc ppc4xx - - Travis Sawyer <[email protected]> -METROBOX powerpc ppc4xx - - Travis Sawyer <[email protected]> +MVBC_P powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <[email protected]> +MVSMR powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <[email protected]> +MERGERBOX powerpc mpc83xx e7a56563 2014-09-29 Andre Schwarz <[email protected]> +MVBLM7 powerpc mpc83xx e7a56563 2014-09-29 Andre Schwarz <[email protected]> +bluestone powerpc ppc4xx 9ed3246e 2014-09-29 Tirumala Marri <[email protected]> +CRAYL1 powerpc ppc4xx 1521cdc5 2014-09-29 David Updegraff <[email protected]> +KAREF powerpc ppc4xx dc9617e0 2014-09-29 Travis Sawyer <[email protected]> +METROBOX powerpc ppc4xx dc9617e0 2014-09-29 Travis Sawyer <[email protected]> PK1C20 nios2 - 70fbc461 2014-08-24 Scott McNutt <[email protected]> PCI5441 nios2 - 70fbc461 2014-08-24 Scott McNutt <[email protected]> flagadm powerpc mpc8xx aec6f8c5 2014-08-22 K?ri Dav??sson <[email protected]>
Signature · 1 line
2.0.0
PATCH 1/9 doc: Update README.scrapyard
Dear Marek Vasut,
Quoted 11 lines · In message <[email protected]> you wrote:
Fill in missing commit IDs and dates when the removal happened.
Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- doc/README.scrapyard | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
Did you not see my previous patch?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de God may be subtle, but He isn't plain mean. - Albert Einstein
PATCH 1/9 doc: Update README.scrapyard
Quoted 13 lines · Wolfgang Denk
Dear Marek Vasut,
Quoted 10 lines · In message <[email protected]> you wrote:
Fill in missing commit IDs and dates when the removal happened.
Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>---
Quoted 4 lines
Quoted 2 lines
doc/README.scrapyard | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)Did you not see my previous patch?
No, I didn't notice. You can skip this patch then.
Best regards,
Marek Vasut
PATCH 1/9 doc: Update README.scrapyard
In reply to Marek VasutDear Marek Vasut,
Quoted 11 lines · In message <[email protected]> you wrote:
Fill in missing commit IDs and dates when the removal happened.
Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- doc/README.scrapyard | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
Skipped, applied
ID State Name -- ----- ---- 401499 Accepted [U-Boot,1/2] README.scrapyard: update commit IDs
instead.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are two ways of constructing a software design. One way is to make it so simple that there are obviously no deficiencies and the other is to make it so complicated that there are no obvious defi- ciencies. - Charles Anthony Richard Hoare
PATCH 2/9 ppc: Zap ICU862 board
In reply to Marek VasutThis board is the only user of CONFIG_SYS_EEPROM_X40430 , remove it so the EEPROM command code can be cleansed of the related code as well.
--- arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 - arch/powerpc/cpu/mpc8xx/fec.c | 40 +-- board/icu862/Kconfig | 9 - board/icu862/MAINTAINERS | 7 - board/icu862/Makefile | 8 - board/icu862/flash.c | 575 ------------------------------------- board/icu862/icu862.c | 199 ------------- board/icu862/pcmcia.c | 262 ----------------- board/icu862/u-boot.lds | 82 ------ board/icu862/u-boot.lds.debug | 122 -------- configs/ICU862_100MHz_defconfig | 4 - configs/ICU862_defconfig | 3 - doc/README.scrapyard | 1 + include/commproc.h | 10 - include/configs/ICU862.h | 443 ---------------------------- include/pcmcia.h | 2 - include/status_led.h | 19 -- 18 files changed, 2 insertions(+), 1789 deletions(-) delete mode 100644 board/icu862/Kconfig delete mode 100644 board/icu862/MAINTAINERS delete mode 100644 board/icu862/Makefile delete mode 100644 board/icu862/flash.c delete mode 100644 board/icu862/icu862.c delete mode 100644 board/icu862/pcmcia.c delete mode 100644 board/icu862/u-boot.lds delete mode 100644 board/icu862/u-boot.lds.debug delete mode 100644 configs/ICU862_100MHz_defconfig delete mode 100644 configs/ICU862_defconfig delete mode 100644 include/configs/ICU862.h
arch/powerpc/cpu/mpc8xx/Kconfig +0 -4
@@ -16,9 +16,6 @@ config TARGET_ESTEEM192E config TARGET_HERMES bool "Support hermes" -config TARGET_ICU862 - bool "Support ICU862" - config TARGET_IP860 bool "Support IP860"
@@ -124,7 +121,6 @@ source "board/eltec/mhpc/Kconfig" source "board/emk/top860/Kconfig" source "board/esteem192e/Kconfig" source "board/hermes/Kconfig" -source "board/icu862/Kconfig" source "board/ip860/Kconfig" source "board/ivm/Kconfig" source "board/kup/kup4k/Kconfig"
arch/powerpc/cpu/mpc8xx/cpu_init.c +0 -1
@@ -126,7 +126,6 @@ void cpu_init_f (volatile immap_t * immr)*/ #if defined(CONFIG_HERMES) || \ - defined(CONFIG_ICU862) || \ defined(CONFIG_IP860) || \ defined(CONFIG_IVML24) || \ defined(CONFIG_IVMS8) || \
arch/powerpc/cpu/mpc8xx/fec.c +1 -39
@@ -205,11 +205,7 @@ static int fec_send(struct eth_device *dev, void *packet, int length) j =0 ;while ((rtx->txbd[txIdx].cbd_sc &BD_ENET_TX_READY ) && (j<TOUT_LOOP )) { -#if defined(CONFIG_ICU862 ) -udelay (10 ); -#else udelay (1 ); -#endif j++; }if (j>=TOUT_LOOP ) {
@@ -424,7 +420,7 @@ static void fec_pin_init(int fecidx)#endif /* !CONFIG_RMII */ -#elif !defined(CONFIG_ICU862) +#else /* * Configure all of port D for MII. */
@@ -437,42 +433,8 @@ static void fec_pin_init(int fecidx) immr->im_ioport.iop_pddir =0x1c58 ;/* Pre rev. D */ else immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */ -#else -/* -* Configure port A for MII. -*/ - -#if defined(CONFIG_ICU862 ) && defined(CONFIG_SYS_DISCOVER_PHY ) - -/* -* On the ICU862 board the MII-MDC pin is routed to PD8 pin -* * of CPU, so for this board we need to configure Utopia and -* * enable PD8 to MII-MDC function -*/ - immr->im_ioport.iop_pdpar |=0x4080 ;#endif -/* -* Has Utopia been configured? -*/ -if (immr->im_ioport.iop_pdpar & (0x8000 >>1 )) { -/* -* YES - Use MUXED mode for UTOPIA bus. -* This frees Port A for use by MII (see 862UM table 41-6). -*/ - immr->im_ioport.utmode &= ~0x80 ; - }else { -/* -* NO - set SPLIT mode for UTOPIA bus. -* -* This doesn't really effect UTOPIA (which isn't -* enabled anyway) but just tells the 862 -* to use port A for MII (see 862UM table 41-6). -*/ - immr->im_ioport.utmode |=0x80 ; - } -#endif /* !defined(CONFIG_ICU862) */ -#endif /* CONFIG_ETHER_ON_FEC1 */ }else if (fecidx ==1 ) {
board/icu862/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_ICU862 - -config SYS_BOARD - default "icu862" - -config SYS_CONFIG_NAME - default "ICU862" - -endif
board/icu862/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -ICU862 BOARD -M: Wolfgang Denk <[email protected]> -S: Maintained -F: board/icu862/ -F: include/configs/ICU862.h -F: configs/ICU862_defconfig -F: configs/ICU862_100MHz_defconfig
board/icu862/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = icu862.o flash.o pcmcia.o
board/icu862/flash.c deleted +0 -575
575 lines not on this page · raw message
board/icu862/icu862.c deleted +0 -199
199 lines not on this page · raw message
board/icu862/pcmcia.c deleted +0 -262
262 lines not on this page · raw message
board/icu862/u-boot.lds deleted +0 -82
82 lines not on this page · raw message
board/icu862/u-boot.lds.debug deleted +0 -122
122 lines not on this page · raw message
configs/ICU862_100MHz_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="100MHz" -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_ICU862=y
configs/ICU862_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_ICU862=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +ICU862 powerpc mpc8xx - - Wolfgang Denk <[email protected]> MVBC_P powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <[email protected]> MVSMR powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <[email protected]> MERGERBOX powerpc mpc83xx e7a56563 2014-09-29 Andre Schwarz <[email protected]>
include/commproc.h +0 -10
@@ -563,16 +563,6 @@ typedef struct scc_enet {#endif /* CONFIG_HERMES */ -/*** ICU862 **********************************************************/ - -#if defined(CONFIG_ICU862 ) - -#ifdef CONFIG_FEC_ENET -#define FEC_ENET /* use FEC for EThernet */ -#endif /* CONFIG_FEC_ETHERNET */ - -#endif /* CONFIG_ICU862 */ -/*** IP860 **********************************************************/ #if defined(CONFIG_IP860 )
include/configs/ICU862.h deleted +0 -443
443 lines not on this page · raw message
include/pcmcia.h +0 -2
@@ -29,8 +29,6 @@# define CONFIG_PCMCIA_SLOT_A #elif defined(CONFIG_LWMON )/* The LWMON use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B -#elif defined(CONFIG_ICU862 )/* The ICU862 use SLOT_B */ -# define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_R360MPI )/* The R360MPI use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ATC )/* The ATC use SLOT_A */
include/status_led.h +0 -19
@@ -114,25 +114,6 @@ void status_led_set (int led, int state);# define STATUS_LED_GREEN 1# define STATUS_LED_BOOT 2/* IDE LED used for boot status */ -/***** ICU862 ********************************************************/ -#elif defined(CONFIG_ICU862 ) - -# define STATUS_LED_PAR im_ioport.iop_papar -# define STATUS_LED_DIR im_ioport.iop_padir -# define STATUS_LED_ODR im_ioport.iop_paodr -# define STATUS_LED_DAT im_ioport.iop_padat - -# define STATUS_LED_BIT 0x4000/* LED 0 is on PA.1 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING -# define STATUS_LED_BIT1 0x1000/* LED 1 is on PA.3 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1/* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0/* LED 0 used for boot status */ -/***** Someone else defines these *************************************/ #elif defined(STATUS_LED_PAR )
Signature · 1 line
2.0.0
PATCH 2/9 ppc: Zap ICU862 board
Dear Marek Vasut,
Quoted 33 lines · In message <[email protected]> you wrote:
This board is the only user of
CONFIG_SYS_EEPROM_X40430, remove it so the EEPROM command code can be cleansed of the related code as well.Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 - arch/powerpc/cpu/mpc8xx/fec.c | 40 +-- board/icu862/Kconfig | 9 - board/icu862/MAINTAINERS | 7 - board/icu862/Makefile | 8 - board/icu862/flash.c | 575 ------------------------------------- board/icu862/icu862.c | 199 ------------- board/icu862/pcmcia.c | 262 ----------------- board/icu862/u-boot.lds | 82 ------ board/icu862/u-boot.lds.debug | 122 -------- configs/ICU862_100MHz_defconfig | 4 - configs/ICU862_defconfig | 3 - doc/README.scrapyard | 1 + include/commproc.h | 10 - include/configs/ICU862.h | 443 ---------------------------- include/pcmcia.h | 2 - include/status_led.h | 19 -- 18 files changed, 2 insertions(+), 1789 deletions(-) delete mode 100644 board/icu862/Kconfig delete mode 100644 board/icu862/MAINTAINERS delete mode 100644 board/icu862/Makefile
Quoted 8 lines
delete mode 100644 board/icu862/flash.c delete mode 100644 board/icu862/icu862.c delete mode 100644 board/icu862/pcmcia.c delete mode 100644 board/icu862/u-boot.lds delete mode 100644 board/icu862/u-boot.lds.debug delete mode 100644 configs/ICU862_100MHz_defconfig delete mode 100644 configs/ICU862_defconfig delete mode 100644 include/configs/ICU862.h
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A witty saying proves nothing, but saying something pointless gets people's attention.
PATCH 3/9 ppc: Zap MHPC board
In reply to Marek VasutThis board uses eeprom accessors in an incorrect way. The board is old and unsupported, just zap it.
--- arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 - board/eltec/mhpc/Kconfig | 12 - board/eltec/mhpc/MAINTAINERS | 6 - board/eltec/mhpc/Makefile | 8 - board/eltec/mhpc/flash.c | 414 --------------------------------- board/eltec/mhpc/mhpc.c | 465 ------------------------------------- board/eltec/mhpc/u-boot.lds.debug | 121 ---------- configs/MHPC_defconfig | 3 - doc/README.scrapyard | 1 + include/commproc.h | 22 -- include/configs/MHPC.h | 369 ----------------------------- 12 files changed, 1 insertion(+), 1425 deletions(-) delete mode 100644 board/eltec/mhpc/Kconfig delete mode 100644 board/eltec/mhpc/MAINTAINERS delete mode 100644 board/eltec/mhpc/Makefile delete mode 100644 board/eltec/mhpc/flash.c delete mode 100644 board/eltec/mhpc/mhpc.c delete mode 100644 board/eltec/mhpc/u-boot.lds.debug delete mode 100644 configs/MHPC_defconfig delete mode 100644 include/configs/MHPC.h
arch/powerpc/cpu/mpc8xx/Kconfig +0 -4
@@ -40,9 +40,6 @@ config TARGET_RRVISION config TARGET_SPD823TS bool "Support SPD823TS" -config TARGET_MHPC - bool "Support MHPC" - config TARGET_TOP860 bool "Support TOP860"
@@ -117,7 +114,6 @@ endchoice source "board/LEOX/elpt860/Kconfig" source "board/RRvision/Kconfig" source "board/cogent/Kconfig" -source "board/eltec/mhpc/Kconfig" source "board/emk/top860/Kconfig" source "board/esteem192e/Kconfig" source "board/hermes/Kconfig"
arch/powerpc/cpu/mpc8xx/cpu_init.c +0 -1
@@ -130,7 +130,6 @@ void cpu_init_f (volatile immap_t * immr)defined (CONFIG_IVML24 ) || \defined (CONFIG_IVMS8 ) || \defined (CONFIG_LWMON ) || \ -defined (CONFIG_MHPC ) || \defined (CONFIG_R360MPI ) || \defined (CONFIG_RMU ) || \defined (CONFIG_SPD823TS )
board/eltec/mhpc/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MHPC - -config SYS_BOARD - default "mhpc" - -config SYS_VENDOR - default "eltec" - -config SYS_CONFIG_NAME - default "MHPC" - -endif
board/eltec/mhpc/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MHPC BOARD -M: Frank Gottschling <[email protected]> -S: Maintained -F: board/eltec/mhpc/ -F: include/configs/MHPC.h -F: configs/MHPC_defconfig
board/eltec/mhpc/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = mhpc.o flash.o
board/eltec/mhpc/flash.c deleted +0 -414
414 lines not on this page · raw message
board/eltec/mhpc/mhpc.c deleted +0 -465
465 lines not on this page · raw message
board/eltec/mhpc/u-boot.lds.debug deleted +0 -121
121 lines not on this page · raw message
configs/MHPC_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_MHPC=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +MHPC powerpc mpc8xx - - Frank Gottschling <[email protected]> ICU862 powerpc mpc8xx - - Wolfgang Denk <[email protected]> MVBC_P powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <[email protected]> MVSMR powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <[email protected]>
include/commproc.h +0 -22
@@ -703,28 +703,6 @@ typedef struct scc_enet {#define SICR_ENET_CLKRT ((uint)0x00250000)#endif /* CONFIG_KM8XX */ - -/*** MHPC ********************************************************/ - -#if defined(CONFIG_MHPC ) -/* This ENET stuff is for the MHPC with ethernet on SCC2. -* Note TENA is on Port B. -*/ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004)/* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008)/* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0200)/* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0400)/* PA 5 */ -#define PB_ENET_TENA ((uint)0x00002000)/* PB 18 */ -#define PC_ENET_CLSN ((ushort)0x0040)/* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080)/* PC 8 */ - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002e00)/* RCLK-CLK2, TCLK-CLK3 */ -#endif /* CONFIG_MHPC */ -/*** NETVIA *******************************************************/ #if defined(CONFIG_NETVIA )
include/configs/MHPC.h deleted +0 -369
369 lines not on this page · raw message
Signature · 1 line
2.0.0
PATCH 3/9 ppc: Zap MHPC board
Dear Marek Vasut,
Quoted 23 lines · In message <[email protected]> you wrote:
This board uses eeprom accessors in an incorrect way. The board is old and unsupported, just zap it.
Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/cpu_init.c | 1 - board/eltec/mhpc/Kconfig | 12 - board/eltec/mhpc/MAINTAINERS | 6 - board/eltec/mhpc/Makefile | 8 - board/eltec/mhpc/flash.c | 414 --------------------------------- board/eltec/mhpc/mhpc.c | 465 ------------------------------------- board/eltec/mhpc/u-boot.lds.debug | 121 ---------- configs/MHPC_defconfig | 3 - doc/README.scrapyard | 1 + include/commproc.h | 22 -- include/configs/MHPC.h | 369 ----------------------------- 12 files changed, 1 insertion(+), 1425 deletions(-)
Quoted 8 lines
delete mode 100644 board/eltec/mhpc/Kconfig delete mode 100644 board/eltec/mhpc/MAINTAINERS delete mode 100644 board/eltec/mhpc/Makefile delete mode 100644 board/eltec/mhpc/flash.c delete mode 100644 board/eltec/mhpc/mhpc.c delete mode 100644 board/eltec/mhpc/u-boot.lds.debug delete mode 100644 configs/MHPC_defconfig delete mode 100644 include/configs/MHPC.h
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I am an atheist, thank God!
PATCH 4/9 ppc: Zap Hymod board
In reply to Marek VasutRemove this board as this is the only one last user of eeprom_probe(), which is pretty non-standard stuff.
This patch also removes all the PHP, SQL and CSS stuff from U-Boot, which probably makes U-Boot a bit less IoT ;-)
--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +- arch/powerpc/cpu/mpc8260/interrupts.c | 10 +- arch/powerpc/cpu/mpc8260/start.S | 14 - arch/powerpc/cpu/mpc83xx/start.S | 11 - arch/powerpc/include/asm/u-boot.h | 3 - board/hymod/Kconfig | 9 - board/hymod/MAINTAINERS | 6 - board/hymod/Makefile | 8 - board/hymod/bsp.c | 387 ------------------ board/hymod/config.mk | 14 - board/hymod/eeprom.c | 678 ------------------------------- board/hymod/env.c | 221 ----------- board/hymod/fetch.c | 91 ----- board/hymod/flash.c | 490 ----------------------- board/hymod/flash.h | 140 ------- board/hymod/global_env | 145 ------- board/hymod/hymod.c | 521 ------------------------ board/hymod/hymod.h | 305 -------------- board/hymod/input.c | 91 ----- board/hymod/u-boot.lds | 132 ------ board/hymod/u-boot.lds.debug | 121 ------ configs/hymod_defconfig | 3 - doc/README.scrapyard | 1 + include/asm-generic/u-boot.h | 3 - include/common.h | 3 - include/configs/hymod.h | 728 ---------------------------------- tools/bddb/README | 116 ------ tools/bddb/badsubmit.php | 23 -- tools/bddb/bddb.css | 207 ---------- tools/bddb/brlog.php | 109 ----- tools/bddb/browse.php | 147 ------- tools/bddb/config.php | 16 - tools/bddb/create_tables.sql | 90 ----- tools/bddb/defs.php | 710 --------------------------------- tools/bddb/dodelete.php | 65 --- tools/bddb/dodellog.php | 57 --- tools/bddb/doedit.php | 186 --------- tools/bddb/doedlog.php | 76 ---- tools/bddb/donew.php | 230 ----------- tools/bddb/donewlog.php | 86 ---- tools/bddb/edit.php | 131 ------ tools/bddb/edlog.php | 86 ---- tools/bddb/execute.php | 33 -- tools/bddb/index.php | 38 -- tools/bddb/new.php | 120 ------ tools/bddb/newlog.php | 54 --- 47 files changed, 3 insertions(+), 6743 deletions(-) delete mode 100644 board/hymod/Kconfig delete mode 100644 board/hymod/MAINTAINERS delete mode 100644 board/hymod/Makefile delete mode 100644 board/hymod/bsp.c delete mode 100644 board/hymod/config.mk delete mode 100644 board/hymod/eeprom.c delete mode 100644 board/hymod/env.c delete mode 100644 board/hymod/fetch.c delete mode 100644 board/hymod/flash.c delete mode 100644 board/hymod/flash.h delete mode 100644 board/hymod/global_env delete mode 100644 board/hymod/hymod.c delete mode 100644 board/hymod/hymod.h delete mode 100644 board/hymod/input.c delete mode 100644 board/hymod/u-boot.lds delete mode 100644 board/hymod/u-boot.lds.debug delete mode 100644 configs/hymod_defconfig delete mode 100644 include/configs/hymod.h delete mode 100644 tools/bddb/README delete mode 100644 tools/bddb/badsubmit.php delete mode 100644 tools/bddb/bddb.css delete mode 100644 tools/bddb/brlog.php delete mode 100644 tools/bddb/browse.php delete mode 100644 tools/bddb/config.php delete mode 100644 tools/bddb/create_tables.sql delete mode 100644 tools/bddb/defs.php delete mode 100644 tools/bddb/dodelete.php delete mode 100644 tools/bddb/dodellog.php delete mode 100644 tools/bddb/doedit.php delete mode 100644 tools/bddb/doedlog.php delete mode 100644 tools/bddb/donew.php delete mode 100644 tools/bddb/donewlog.php delete mode 100644 tools/bddb/edit.php delete mode 100644 tools/bddb/edlog.php delete mode 100644 tools/bddb/execute.php delete mode 100644 tools/bddb/index.php delete mode 100644 tools/bddb/new.php delete mode 100644 tools/bddb/newlog.php
arch/powerpc/cpu/mpc8260/Kconfig +0 -4
@@ -28,9 +28,6 @@ config TARGET_EP82XXM config TARGET_GW8260 bool "Support gw8260" -config TARGET_HYMOD - bool "Support hymod" - config TARGET_IPHASE4539 bool "Support IPHASE4539"
@@ -78,7 +75,6 @@ source "board/ep82xxm/Kconfig" source "board/freescale/mpc8266ads/Kconfig" source "board/funkwerk/vovpn-gw/Kconfig" source "board/gw8260/Kconfig" -source "board/hymod/Kconfig" source "board/ids/ids8247/Kconfig" source "board/iphase4539/Kconfig" source "board/keymile/km82xx/Kconfig"
arch/powerpc/cpu/mpc8260/ether_fcc.c +1 -26
@@ -645,32 +645,7 @@ eth_loopback_test (void)/* 28.9 - (1-2): ioports have been set up already */ -#if defined(CONFIG_HYMOD ) -/* -* Attention: this is board-specific -* 0, FCC1 -* 1, FCC2 -* 2, FCC3 -*/ -# define FCC_START_LOOP 0 -# define FCC_END_LOOP 2 - -/* -* Attention: this is board-specific -* - FCC1 Rx-CLK is CLK10 -* - FCC1 Tx-CLK is CLK11 -* - FCC2 Rx-CLK is CLK13 -* - FCC2 Tx-CLK is CLK14 -* - FCC3 Rx-CLK is CLK15 -* - FCC3 Tx-CLK is CLK16 -*/ - -/* 28.9 - (3): connect FCC's tx and rx clocks */ - immr->im_cpmux.cmx_uar =0 ; - immr->im_cpmux.cmx_fcr =CMXFCR_RF1CS_CLK10 |CMXFCR_TF1CS_CLK11 |\ -CMXFCR_RF2CS_CLK13 |CMXFCR_TF2CS_CLK14 |\ -CMXFCR_RF3CS_CLK15 |CMXFCR_TF3CS_CLK16 ; -#elif defined(CONFIG_SACSng) +#if defined(CONFIG_SACSng)/* * Attention: this is board-specific * 1, FCC2
arch/powerpc/cpu/mpc8260/interrupts.c +1 -9
@@ -142,15 +142,7 @@ int interrupt_init_cpu (unsigned *decrementer_count) immr->im_intctl.ic_sipnrh =0xffffffff ; immr->im_intctl.ic_sipnrl =0xffffffff ; -#ifdef CONFIG_HYMOD -/* -* ensure all external interrupt sources default to trigger on -* high-to-low transition (i.e. edge triggered active low) -*/ - immr->im_intctl.ic_siexr =-1 ; -#endif - -return (0 ); +return 0 ; }/****************************************************************************/
arch/powerpc/cpu/mpc8260/start.S +0 -14
@@ -48,9 +48,6 @@ GOT_ENTRY(__init_end) GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) -#if defined(CONFIG_HYMOD) - GOT_ENTRY(environment) -#endif END_GOT /*
@@ -878,18 +875,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) -#if defined(CONFIG_HYMOD) - /* - * For HYMOD - the environment is the very last item in flash. - * The real .bss stops just before environment starts, so only - * clear up to that point. - * - * taken from mods for FADS board - */ - lwz r4,GOT(environment) -#else lwz r4,GOT(__bss_end) -#endif cmplw 0, r3, r4 beq 6f
arch/powerpc/cpu/mpc83xx/start.S +0 -11
@@ -958,18 +958,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) -#if defined(CONFIG_HYMOD) - /* - * For HYMOD - the environment is the very last item in flash. - * The real .bss stops just before environment starts, so only - * clear up to that point. - * - * taken from mods for FADS board - */ - lwz r4,GOT(environment) -#else lwz r4,GOT(__bss_end) -#endif cmplw 0, r3, r4 beq 6f
arch/powerpc/include/asm/u-boot.h +0 -3
@@ -77,9 +77,6 @@ typedef struct bd_info {unsigned int bi_pci_busfreq;/* PCI Bus speed, in Hz */ unsigned char bi_pci_enetaddr[6 ];/* PCI Ethernet MAC address */ #endif -#if defined(CONFIG_HYMOD ) -hymod_conf_t bi_hymod_conf;/* hymod configuration information */ -#endif #ifdef CONFIG_HAS_ETH1 unsigned char bi_enet1addr[6 ];/* OLD: see README.enetaddr */
board/hymod/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_HYMOD - -config SYS_BOARD - default "hymod" - -config SYS_CONFIG_NAME - default "hymod" - -endif
board/hymod/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -HYMOD BOARD -M: Murray Jensen <[email protected]> -S: Maintained -F: board/hymod/ -F: include/configs/hymod.h -F: configs/hymod_defconfig
board/hymod/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = hymod.o flash.o bsp.o eeprom.o fetch.o input.o env.o
board/hymod/bsp.c deleted +0 -387
387 lines not on this page · raw message
board/hymod/config.mk deleted +0 -14
@@ -1,14 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# HYMOD boards -# - -PLATFORM_CPPFLAGS += -I$(srctree) - -OBJCOPYFLAGS = --remove-section=.ppcenv
board/hymod/eeprom.c deleted +0 -678
678 lines not on this page · raw message
board/hymod/env.c deleted +0 -221
221 lines not on this page · raw message
board/hymod/fetch.c deleted +0 -91
91 lines not on this page · raw message
board/hymod/flash.c deleted +0 -490
490 lines not on this page · raw message
board/hymod/flash.h deleted +0 -140
140 lines not on this page · raw message
board/hymod/global_env deleted +0 -145
145 lines not on this page · raw message
board/hymod/hymod.c deleted +0 -521
521 lines not on this page · raw message
board/hymod/hymod.h deleted +0 -305
171 lines not on this page · raw message
board/hymod/input.c deleted +0 -91
91 lines not on this page · raw message
board/hymod/u-boot.lds deleted +0 -132
132 lines not on this page · raw message
board/hymod/u-boot.lds.debug deleted +0 -121
121 lines not on this page · raw message
include/configs/hymod.h deleted +0 -728
728 lines not on this page · raw message
tools/bddb/README deleted +0 -116
116 lines not on this page · raw message
tools/bddb/bddb.css deleted +0 -207
207 lines not on this page · raw message
tools/bddb/brlog.php deleted +0 -109
109 lines not on this page · raw message
tools/bddb/browse.php deleted +0 -147
147 lines not on this page · raw message
tools/bddb/create_tables.sql deleted +0 -90
90 lines not on this page · raw message
tools/bddb/defs.php deleted +0 -710
710 lines not on this page · raw message
tools/bddb/dodelete.php deleted +0 -65
65 lines not on this page · raw message
tools/bddb/dodellog.php deleted +0 -57
57 lines not on this page · raw message
tools/bddb/doedit.php deleted +0 -186
186 lines not on this page · raw message
tools/bddb/doedlog.php deleted +0 -76
76 lines not on this page · raw message
tools/bddb/donew.php deleted +0 -230
230 lines not on this page · raw message
tools/bddb/donewlog.php deleted +0 -86
86 lines not on this page · raw message
tools/bddb/edit.php deleted +0 -131
131 lines not on this page · raw message
tools/bddb/edlog.php deleted +0 -86
86 lines not on this page · raw message
tools/bddb/new.php deleted +0 -120
120 lines not on this page · raw message
tools/bddb/newlog.php deleted +0 -54
54 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.0.0
Part of the diff is not shown here. View the raw message.
PATCH 4/9 ppc: Zap Hymod board
Dear Marek Vasut,
Quoted 91 lines · In message <[email protected]> you wrote:
Remove this board as this is the only one last user of
eeprom_probe(), which is pretty non-standard stuff.This patch also removes all the PHP, SQL and CSS stuff from U-Boot, which probably makes U-Boot a bit less IoT ;-)
Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +- arch/powerpc/cpu/mpc8260/interrupts.c | 10 +- arch/powerpc/cpu/mpc8260/start.S | 14 - arch/powerpc/cpu/mpc83xx/start.S | 11 - arch/powerpc/include/asm/u-boot.h | 3 - board/hymod/Kconfig | 9 - board/hymod/MAINTAINERS | 6 - board/hymod/Makefile | 8 - board/hymod/bsp.c | 387 ------------------ board/hymod/config.mk | 14 - board/hymod/eeprom.c | 678 ------------------------------- board/hymod/env.c | 221 ----------- board/hymod/fetch.c | 91 ----- board/hymod/flash.c | 490 ----------------------- board/hymod/flash.h | 140 ------- board/hymod/global_env | 145 ------- board/hymod/hymod.c | 521 ------------------------ board/hymod/hymod.h | 305 -------------- board/hymod/input.c | 91 ----- board/hymod/u-boot.lds | 132 ------ board/hymod/u-boot.lds.debug | 121 ------ configs/hymod_defconfig | 3 - doc/README.scrapyard | 1 + include/asm-generic/u-boot.h | 3 - include/common.h | 3 - include/configs/hymod.h | 728 ---------------------------------- tools/bddb/README | 116 ------ tools/bddb/badsubmit.php | 23 -- tools/bddb/bddb.css | 207 ---------- tools/bddb/brlog.php | 109 ----- tools/bddb/browse.php | 147 ------- tools/bddb/config.php | 16 - tools/bddb/create_tables.sql | 90 ----- tools/bddb/defs.php | 710 --------------------------------- tools/bddb/dodelete.php | 65 --- tools/bddb/dodellog.php | 57 --- tools/bddb/doedit.php | 186 --------- tools/bddb/doedlog.php | 76 ---- tools/bddb/donew.php | 230 ----------- tools/bddb/donewlog.php | 86 ---- tools/bddb/edit.php | 131 ------ tools/bddb/edlog.php | 86 ---- tools/bddb/execute.php | 33 -- tools/bddb/index.php | 38 -- tools/bddb/new.php | 120 ------ tools/bddb/newlog.php | 54 --- 47 files changed, 3 insertions(+), 6743 deletions(-) delete mode 100644 board/hymod/Kconfig delete mode 100644 board/hymod/MAINTAINERS delete mode 100644 board/hymod/Makefile delete mode 100644 board/hymod/bsp.c delete mode 100644 board/hymod/config.mk delete mode 100644 board/hymod/eeprom.c delete mode 100644 board/hymod/env.c delete mode 100644 board/hymod/fetch.c delete mode 100644 board/hymod/flash.c delete mode 100644 board/hymod/flash.h delete mode 100644 board/hymod/global_env delete mode 100644 board/hymod/hymod.c delete mode 100644 board/hymod/hymod.h delete mode 100644 board/hymod/input.c delete mode 100644 board/hymod/u-boot.lds delete mode 100644 board/hymod/u-boot.lds.debug delete mode 100644 configs/hymod_defconfig delete mode 100644 include/configs/hymod.h delete mode 100644 tools/bddb/README delete mode 100644 tools/bddb/badsubmit.php delete mode 100644 tools/bddb/bddb.css delete mode 100644 tools/bddb/brlog.php delete mode 100644 tools/bddb/browse.php delete mode 100644 tools/bddb/config.php delete mode 100644 tools/bddb/create_tables.sql delete mode 100644 tools/bddb/defs.php delete mode 100644 tools/bddb/dodelete.php delete mode 100644 tools/bddb/dodellog.php delete mode 100644 tools/bddb/doedit.php delete mode 100644 tools/bddb/doedlog.php
Quoted 8 lines
delete mode 100644 tools/bddb/donew.php delete mode 100644 tools/bddb/donewlog.php delete mode 100644 tools/bddb/edit.php delete mode 100644 tools/bddb/edlog.php delete mode 100644 tools/bddb/execute.php delete mode 100644 tools/bddb/index.php delete mode 100644 tools/bddb/new.php delete mode 100644 tools/bddb/newlog.php
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "There is no statute of limitations on stupidity." - Randomly produced by a computer program called Markov3.
PATCH 5/9 ppc: Zap HWW1U1A board
In reply to Marek VasutThis is the only used of CONFIG_SPI_X macro, just zap this.
--- arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/exmeritus/hww1u1a/Kconfig | 12 - board/exmeritus/hww1u1a/MAINTAINERS | 6 - board/exmeritus/hww1u1a/Makefile | 12 - board/exmeritus/hww1u1a/ddr.c | 34 --- board/exmeritus/hww1u1a/gpios.h | 56 ----- board/exmeritus/hww1u1a/hww1u1a.c | 268 --------------------- board/exmeritus/hww1u1a/law.c | 18 -- board/exmeritus/hww1u1a/tlb.c | 90 ------- configs/HWW1U1A_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/HWW1U1A.h | 460 ------------------------------------ 12 files changed, 1 insertion(+), 963 deletions(-) delete mode 100644 board/exmeritus/hww1u1a/Kconfig delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS delete mode 100644 board/exmeritus/hww1u1a/Makefile delete mode 100644 board/exmeritus/hww1u1a/ddr.c delete mode 100644 board/exmeritus/hww1u1a/gpios.h delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c delete mode 100644 board/exmeritus/hww1u1a/law.c delete mode 100644 board/exmeritus/hww1u1a/tlb.c delete mode 100644 configs/HWW1U1A_defconfig delete mode 100644 include/configs/HWW1U1A.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -13,9 +13,6 @@ config TARGET_SBC8548 config TARGET_SOCRATES bool "Support socrates" -config TARGET_HWW1U1A - bool "Support HWW1U1A" - config TARGET_B4860QDS bool "Support B4860QDS"
@@ -144,7 +141,6 @@ config TARGET_XPEDITE550X endchoice -source "board/exmeritus/hww1u1a/Kconfig" source "board/freescale/b4860qds/Kconfig" source "board/freescale/bsc9131rdb/Kconfig" source "board/freescale/bsc9132qds/Kconfig"
board/exmeritus/hww1u1a/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_HWW1U1A - -config SYS_BOARD - default "hww1u1a" - -config SYS_VENDOR - default "exmeritus" - -config SYS_CONFIG_NAME - default "HWW1U1A" - -endif
board/exmeritus/hww1u1a/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -HWW1U1A BOARD -#M: Kyle Moffett <[email protected]> -S: Orphan (since 2014-06) -F: board/exmeritus/hww1u1a/ -F: include/configs/HWW1U1A.h -F: configs/HWW1U1A_defconfig
board/exmeritus/hww1u1a/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += hww1u1a.o -obj-y += law.o -obj-y += tlb.o -obj-$(CONFIG_DDR_SPD) += ddr.o
board/exmeritus/hww1u1a/ddr.c deleted +0 -34
@@ -1,34 +0,0 @@ -/* -* Copyright 2009-2010 eXMeritus, A Boeing Company -* Copyright 2008-2009 Freescale Semiconductor, Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* Version 2 as published by the Free Software Foundation. -*/ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options (memctl_options_t *popts, -dimm_params_t *pdimm, -unsigned int ctrl_num) -{ -/* -* We only support one DIMM, so according to the P2020 docs we should -* set the options as follows: -*/ - popts->cs_local_opts[0 ].odt_rd_cfg =0 ; - popts->cs_local_opts[0 ].odt_wr_cfg =4 ; - popts->cs_local_opts[1 ].odt_rd_cfg =0 ; - popts->cs_local_opts[1 ].odt_wr_cfg =0 ; - popts->half_strength_driver_enable =0 ; - -/* Manually configured for our static clock rate */ - popts->clk_adjust =4 ; - popts->cpo_override =4 ; - popts->write_data_delay =2 ; - popts->twot_en =0 ; -}
board/exmeritus/hww1u1a/gpios.h deleted +0 -56
56 lines not on this page · raw message
board/exmeritus/hww1u1a/hww1u1a.c deleted +0 -268
268 lines not on this page · raw message
board/exmeritus/hww1u1a/law.c deleted +0 -18
@@ -1,18 +0,0 @@ -/* -* Copyright 2008-2009 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, [email protected]. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -SET_LAW (CONFIG_SYS_FLASH_BASE_PHYS ,LAW_SIZE_256M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/exmeritus/hww1u1a/tlb.c deleted +0 -90
90 lines not on this page · raw message
configs/HWW1U1A_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_HWW1U1A=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +HWW1U1A powerpc mpc85xx - - Kyle Moffett <[email protected]> hymod powerpc mpc8260 - - Murray Jensen <[email protected]> MHPC powerpc mpc8xx - - Frank Gottschling <[email protected]> ICU862 powerpc mpc8xx - - Wolfgang Denk <[email protected]>
include/configs/HWW1U1A.h deleted +0 -460
460 lines not on this page · raw message
Signature · 1 line
2.0.0
PATCH 5/9 ppc: Zap HWW1U1A board
Dear Marek Vasut,
Quoted 24 lines · In message <[email protected]> you wrote:
This is the only used of
CONFIG_SPI_Xmacro, just zap this.Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/exmeritus/hww1u1a/Kconfig | 12 - board/exmeritus/hww1u1a/MAINTAINERS | 6 - board/exmeritus/hww1u1a/Makefile | 12 - board/exmeritus/hww1u1a/ddr.c | 34 --- board/exmeritus/hww1u1a/gpios.h | 56 ----- board/exmeritus/hww1u1a/hww1u1a.c | 268 --------------------- board/exmeritus/hww1u1a/law.c | 18 -- board/exmeritus/hww1u1a/tlb.c | 90 ------- configs/HWW1U1A_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/HWW1U1A.h | 460 ------------------------------------ 12 files changed, 1 insertion(+), 963 deletions(-) delete mode 100644 board/exmeritus/hww1u1a/Kconfig delete mode 100644 board/exmeritus/hww1u1a/MAINTAINERS
Quoted 8 lines
delete mode 100644 board/exmeritus/hww1u1a/Makefile delete mode 100644 board/exmeritus/hww1u1a/ddr.c delete mode 100644 board/exmeritus/hww1u1a/gpios.h delete mode 100644 board/exmeritus/hww1u1a/hww1u1a.c delete mode 100644 board/exmeritus/hww1u1a/law.c delete mode 100644 board/exmeritus/hww1u1a/tlb.c delete mode 100644 configs/HWW1U1A_defconfig delete mode 100644 include/configs/HWW1U1A.h
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The computer can't tell you the emotional story. It can give you the exact mathematical design, but what's missing is the eyebrows. - Frank Zappa
PATCH 6/9 ppc: Zap IDS8247 board
In reply to Marek VasutThis board is old and is using CONFIG_I2C_X, which is wrong.
--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - board/ids/ids8247/Kconfig | 12 - board/ids/ids8247/MAINTAINERS | 6 - board/ids/ids8247/Makefile | 11 - board/ids/ids8247/ids8247.c | 390 --------------------------------- configs/IDS8247_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/IDS8247.h | 462 --------------------------------------- 8 files changed, 1 insertion(+), 888 deletions(-) delete mode 100644 board/ids/ids8247/Kconfig delete mode 100644 board/ids/ids8247/MAINTAINERS delete mode 100644 board/ids/ids8247/Makefile delete mode 100644 board/ids/ids8247/ids8247.c delete mode 100644 configs/IDS8247_defconfig delete mode 100644 include/configs/IDS8247.h
arch/powerpc/cpu/mpc8260/Kconfig +0 -4
@@ -52,9 +52,6 @@ config TARGET_MPC8266ADS config TARGET_VOVPN_GW bool "Support VoVPN-GW" -config TARGET_IDS8247 - bool "Support IDS8247" - config TARGET_KM82XX bool "Support km82xx"
@@ -75,7 +72,6 @@ source "board/ep82xxm/Kconfig" source "board/freescale/mpc8266ads/Kconfig" source "board/funkwerk/vovpn-gw/Kconfig" source "board/gw8260/Kconfig" -source "board/ids/ids8247/Kconfig" source "board/iphase4539/Kconfig" source "board/keymile/km82xx/Kconfig" source "board/muas3001/Kconfig"
board/ids/ids8247/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_IDS8247 - -config SYS_BOARD - default "ids8247" - -config SYS_VENDOR - default "ids" - -config SYS_CONFIG_NAME - default "IDS8247" - -endif
board/ids/ids8247/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -IDS8247 BOARD -M: Heiko Schocher <[email protected]> -S: Maintained -F: board/ids/ids8247/ -F: include/configs/IDS8247.h -F: configs/IDS8247_defconfig
board/ids/ids8247/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# (C) Copyright 2005 -# Heiko Schocher, DENX Software Engineering, <[email protected]> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = ids8247.o
board/ids/ids8247/ids8247.c deleted +0 -390
390 lines not on this page · raw message
configs/IDS8247_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_IDS8247=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +IDS8247 powerpc mpc8260 - - Heiko Schocher <[email protected]> HWW1U1A powerpc mpc85xx - - Kyle Moffett <[email protected]> hymod powerpc mpc8260 - - Murray Jensen <[email protected]> MHPC powerpc mpc8xx - - Frank Gottschling <[email protected]>
include/configs/IDS8247.h deleted +0 -462
462 lines not on this page · raw message
Signature · 1 line
2.0.0
PATCH 6/9 ppc: Zap IDS8247 board
Dear Marek Vasut,
Quoted 8 lines · In message <[email protected]> you wrote:
This board is old and is using
CONFIG_I2C_X, which is wrong.Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>
Quoted 16 lines
--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - board/ids/ids8247/Kconfig | 12 - board/ids/ids8247/MAINTAINERS | 6 - board/ids/ids8247/Makefile | 11 - board/ids/ids8247/ids8247.c | 390 --------------------------------- configs/IDS8247_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/IDS8247.h | 462 --------------------------------------- 8 files changed, 1 insertion(+), 888 deletions(-) delete mode 100644 board/ids/ids8247/Kconfig delete mode 100644 board/ids/ids8247/MAINTAINERS delete mode 100644 board/ids/ids8247/Makefile delete mode 100644 board/ids/ids8247/ids8247.c delete mode 100644 configs/IDS8247_defconfig delete mode 100644 include/configs/IDS8247.h
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de My play was a complete success. The audience was a failure.
PATCH 7/9 ppc: Zap TQM8260 board
In reply to Marek VasutThis board is old and is using CONFIG_I2C_X, which is wrong.
--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - board/tqc/tqm8260/Kconfig | 12 - board/tqc/tqm8260/MAINTAINERS | 16 - board/tqc/tqm8260/Makefile | 8 - board/tqc/tqm8260/README | 415 -------------------------- board/tqc/tqm8260/tqm8260.c | 352 ---------------------- configs/TQM8255_AA_defconfig | 4 - configs/TQM8260_AA_defconfig | 4 - configs/TQM8260_AB_defconfig | 4 - configs/TQM8260_AC_defconfig | 4 - configs/TQM8260_AD_defconfig | 4 - configs/TQM8260_AE_defconfig | 4 - configs/TQM8260_AF_defconfig | 4 - configs/TQM8260_AG_defconfig | 4 - configs/TQM8260_AH_defconfig | 4 - configs/TQM8260_AI_defconfig | 4 - configs/TQM8265_AA_defconfig | 4 - doc/README.scrapyard | 1 + include/configs/TQM8260.h | 620 --------------------------------------- 19 files changed, 1 insertion(+), 1471 deletions(-) delete mode 100644 board/tqc/tqm8260/Kconfig delete mode 100644 board/tqc/tqm8260/MAINTAINERS delete mode 100644 board/tqc/tqm8260/Makefile delete mode 100644 board/tqc/tqm8260/README delete mode 100644 board/tqc/tqm8260/tqm8260.c delete mode 100644 configs/TQM8255_AA_defconfig delete mode 100644 configs/TQM8260_AA_defconfig delete mode 100644 configs/TQM8260_AB_defconfig delete mode 100644 configs/TQM8260_AC_defconfig delete mode 100644 configs/TQM8260_AD_defconfig delete mode 100644 configs/TQM8260_AE_defconfig delete mode 100644 configs/TQM8260_AF_defconfig delete mode 100644 configs/TQM8260_AG_defconfig delete mode 100644 configs/TQM8260_AH_defconfig delete mode 100644 configs/TQM8260_AI_defconfig delete mode 100644 configs/TQM8265_AA_defconfig delete mode 100644 include/configs/TQM8260.h
arch/powerpc/cpu/mpc8260/Kconfig +0 -4
@@ -55,9 +55,6 @@ config TARGET_VOVPN_GW config TARGET_KM82XX bool "Support km82xx" -config TARGET_TQM8260 - bool "Support TQM8260" - config TARGET_TQM8272 bool "Support TQM8272"
@@ -79,7 +76,6 @@ source "board/pm826/Kconfig" source "board/pm828/Kconfig" source "board/ppmc8260/Kconfig" source "board/sacsng/Kconfig" -source "board/tqc/tqm8260/Kconfig" source "board/tqc/tqm8272/Kconfig" endmenu
board/tqc/tqm8260/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_TQM8260 - -config SYS_BOARD - default "tqm8260" - -config SYS_VENDOR - default "tqc" - -config SYS_CONFIG_NAME - default "TQM8260" - -endif
board/tqc/tqm8260/MAINTAINERS deleted +0 -16
@@ -1,16 +0,0 @@ -TQM8260 BOARD -M: Wolfgang Denk <[email protected]> -S: Maintained -F: board/tqc/tqm8260/ -F: include/configs/TQM8260.h -F: configs/TQM8255_AA_defconfig -F: configs/TQM8260_AA_defconfig -F: configs/TQM8260_AB_defconfig -F: configs/TQM8260_AC_defconfig -F: configs/TQM8260_AD_defconfig -F: configs/TQM8260_AE_defconfig -F: configs/TQM8260_AF_defconfig -F: configs/TQM8260_AG_defconfig -F: configs/TQM8260_AH_defconfig -F: configs/TQM8260_AI_defconfig -F: configs/TQM8265_AA_defconfig
board/tqc/tqm8260/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = tqm8260.o ../tqm8xx/load_sernum_ethaddr.o
board/tqc/tqm8260/README deleted +0 -415
415 lines not on this page · raw message
board/tqc/tqm8260/tqm8260.c deleted +0 -352
352 lines not on this page · raw message
configs/TQM8255_AA_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8255,300MHz" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AA_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,200MHz" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AB_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,200MHz,L2_CACHE,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AC_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,200MHz,L2_CACHE,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AD_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AE_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,266MHz" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AF_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AG_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AH_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,L2_CACHE,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8260_AI_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8260,300MHz,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
configs/TQM8265_AA_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="MPC8265,300MHz,BUSMODE_60x" -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8260=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +TQM8260 powerpc mpc8260 - - Wolfgang Denk <[email protected]> IDS8247 powerpc mpc8260 - - Heiko Schocher <[email protected]> HWW1U1A powerpc mpc85xx - - Kyle Moffett <[email protected]> hymod powerpc mpc8260 - - Murray Jensen <[email protected]>
include/configs/TQM8260.h deleted +0 -620
620 lines not on this page · raw message
Signature · 1 line
2.0.0
PATCH 7/9 ppc: Zap TQM8260 board
Dear Marek Vasut,
Quoted 38 lines · In message <[email protected]> you wrote:
This board is old and is using
CONFIG_I2C_X, which is wrong.Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - board/tqc/tqm8260/Kconfig | 12 - board/tqc/tqm8260/MAINTAINERS | 16 - board/tqc/tqm8260/Makefile | 8 - board/tqc/tqm8260/README | 415 -------------------------- board/tqc/tqm8260/tqm8260.c | 352 ---------------------- configs/TQM8255_AA_defconfig | 4 - configs/TQM8260_AA_defconfig | 4 - configs/TQM8260_AB_defconfig | 4 - configs/TQM8260_AC_defconfig | 4 - configs/TQM8260_AD_defconfig | 4 - configs/TQM8260_AE_defconfig | 4 - configs/TQM8260_AF_defconfig | 4 - configs/TQM8260_AG_defconfig | 4 - configs/TQM8260_AH_defconfig | 4 - configs/TQM8260_AI_defconfig | 4 - configs/TQM8265_AA_defconfig | 4 - doc/README.scrapyard | 1 + include/configs/TQM8260.h | 620 --------------------------------------- 19 files changed, 1 insertion(+), 1471 deletions(-) delete mode 100644 board/tqc/tqm8260/Kconfig delete mode 100644 board/tqc/tqm8260/MAINTAINERS delete mode 100644 board/tqc/tqm8260/Makefile delete mode 100644 board/tqc/tqm8260/README delete mode 100644 board/tqc/tqm8260/tqm8260.c delete mode 100644 configs/TQM8255_AA_defconfig delete mode 100644 configs/TQM8260_AA_defconfig delete mode 100644 configs/TQM8260_AB_defconfig delete mode 100644 configs/TQM8260_AC_defconfig
Quoted 8 lines
delete mode 100644 configs/TQM8260_AD_defconfig delete mode 100644 configs/TQM8260_AE_defconfig delete mode 100644 configs/TQM8260_AF_defconfig delete mode 100644 configs/TQM8260_AG_defconfig delete mode 100644 configs/TQM8260_AH_defconfig delete mode 100644 configs/TQM8260_AI_defconfig delete mode 100644 configs/TQM8265_AA_defconfig delete mode 100644 include/configs/TQM8260.h
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Boykottiert Microsoft - Kauft Eure Fenster bei OBI!
PATCH 8/9 ppc: Zap TQM8272 board
In reply to Marek VasutThis board is old and is using CONFIG_I2C_X, which is wrong.
--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - arch/powerpc/cpu/mpc8260/pci.c | 2 - board/tqc/tqm8272/Kconfig | 12 - board/tqc/tqm8272/MAINTAINERS | 6 - board/tqc/tqm8272/Makefile | 8 - board/tqc/tqm8272/nand.c | 264 ----------- board/tqc/tqm8272/tqm8272.c | 944 --------------------------------------- board/tqc/tqm8272/tqm8272.h | 37 -- configs/TQM8272_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/TQM8272.h | 735 ------------------------------ 11 files changed, 1 insertion(+), 2015 deletions(-) delete mode 100644 board/tqc/tqm8272/Kconfig delete mode 100644 board/tqc/tqm8272/MAINTAINERS delete mode 100644 board/tqc/tqm8272/Makefile delete mode 100644 board/tqc/tqm8272/nand.c delete mode 100644 board/tqc/tqm8272/tqm8272.c delete mode 100644 board/tqc/tqm8272/tqm8272.h delete mode 100644 configs/TQM8272_defconfig delete mode 100644 include/configs/TQM8272.h
arch/powerpc/cpu/mpc8260/Kconfig +0 -4
@@ -55,9 +55,6 @@ config TARGET_VOVPN_GW config TARGET_KM82XX bool "Support km82xx" -config TARGET_TQM8272 - bool "Support TQM8272" - endchoice source "board/atc/Kconfig"
@@ -76,6 +73,5 @@ source "board/pm826/Kconfig" source "board/pm828/Kconfig" source "board/ppmc8260/Kconfig" source "board/sacsng/Kconfig" -source "board/tqc/tqm8272/Kconfig" endmenu
arch/powerpc/cpu/mpc8260/pci.c +0 -2
@@ -262,8 +262,6 @@ void pci_mpc8250_init (struct pci_controller *hose) | SIUMCR_CS10PC00 |SIUMCR_BCTLC00 |SIUMCR_MMR11 ; -#elif defined(CONFIG_TQM8272 ) -/* nothing to do for this Board here */ #else /* * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
board/tqc/tqm8272/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_TQM8272 - -config SYS_BOARD - default "tqm8272" - -config SYS_VENDOR - default "tqc" - -config SYS_CONFIG_NAME - default "TQM8272" - -endif
board/tqc/tqm8272/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -TQM8272 BOARD -#M: - -S: Maintained -F: board/tqc/tqm8272/ -F: include/configs/TQM8272.h -F: configs/TQM8272_defconfig
board/tqc/tqm8272/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2008 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = tqm8272.o ../tqm8xx/load_sernum_ethaddr.o nand.o
board/tqc/tqm8272/nand.c deleted +0 -264
264 lines not on this page · raw message
board/tqc/tqm8272/tqm8272.c deleted +0 -944
944 lines not on this page · raw message
board/tqc/tqm8272/tqm8272.h deleted +0 -37
@@ -1,37 +0,0 @@ -/* -* (C) Copyright 2008 -* Heiko Schocher, DENX Software Engineering, hs at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef _TQM8272_HEADER_H -#define _TQM8272_HEADER_H - -#define _NOT_USED_ 0xFFFFFFFF - -typedef struct { -int Bus; -int flash; -int flash_nr; -int ram; -int ram_cs; -int nand; -int nand_cs; -int eeprom; -int can; -unsigned long cpunr; -unsigned long option; -int SecEng; -int cpucl; -int cpmcl; -int buscl; -int busclk_real_ok; -int busclk_real; -unsigned char OK; -unsigned char ethaddr[20 ]; -}HWIB_INFO ; - -static HWIB_INFO hwinf = {0 ,0 ,1 ,0 ,1 ,0 ,0 ,0 ,0 ,8272 ,0 ,0 , -0 ,0 ,0 ,0 ,0 ,0 }; -#endif /* __CONFIG_H */
configs/TQM8272_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_TQM8272=y
doc/README.scrapyard +1 -0
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +TQM8272 powerpc mpc8260 - - - TQM8260 powerpc mpc8260 - - Wolfgang Denk <[email protected]> IDS8247 powerpc mpc8260 - - Heiko Schocher <[email protected]> HWW1U1A powerpc mpc85xx - - Kyle Moffett <[email protected]>
include/configs/TQM8272.h deleted +0 -735
735 lines not on this page · raw message
Signature · 1 line
2.0.0
PATCH 8/9 ppc: Zap TQM8272 board
Dear Marek Vasut,
Quoted 21 lines · In message <[email protected]> you wrote:
This board is old and is using
CONFIG_I2C_X, which is wrong.Signed-off-by Marek Vasut <[email protected]>Cc Masahiro Yamada <[email protected]>Cc Tom Rini <[email protected]>Cc Wolfgang Denk <[email protected]>Cc Simon Glass <[email protected]>Cc Heiko Schocher <[email protected]>--- arch/powerpc/cpu/mpc8260/Kconfig | 4 - arch/powerpc/cpu/mpc8260/pci.c | 2 - board/tqc/tqm8272/Kconfig | 12 - board/tqc/tqm8272/MAINTAINERS | 6 - board/tqc/tqm8272/Makefile | 8 - board/tqc/tqm8272/nand.c | 264 ----------- board/tqc/tqm8272/tqm8272.c | 944 --------------------------------------- board/tqc/tqm8272/tqm8272.h | 37 -- configs/TQM8272_defconfig | 3 - doc/README.scrapyard | 1 + include/configs/TQM8272.h | 735 ------------------------------ 11 files changed, 1 insertion(+), 2015 deletions(-)
Quoted 8 lines
delete mode 100644 board/tqc/tqm8272/Kconfig delete mode 100644 board/tqc/tqm8272/MAINTAINERS delete mode 100644 board/tqc/tqm8272/Makefile delete mode 100644 board/tqc/tqm8272/nand.c delete mode 100644 board/tqc/tqm8272/tqm8272.c delete mode 100644 board/tqc/tqm8272/tqm8272.h delete mode 100644 configs/TQM8272_defconfig delete mode 100644 include/configs/TQM8272.h
Applied to u-boot-mpc5xxx, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Time is an illusion perpetrated by the manufacturers of space.
PATCH 9/9 arm: Zap tricorder-eeprom
In reply to Marek VasutThis is a reimplementation of the cmd_eeprom with the added bit where it can select I2C bus. Just remove this ugly duplication. If someone needs this code, there should be proper implementation submitted.
--- board/corscience/tricorder/Makefile | 2 +- board/corscience/tricorder/tricorder-eeprom.c | 251 -------------------------- board/corscience/tricorder/tricorder-eeprom.h | 41 ----- 3 files changed, 1 insertion(+), 293 deletions(-) delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h
board/corscience/tricorder/Makefile +1 -1
@@ -8,4 +8,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := tricorder.o tricorder-eeprom.o led.o +obj-y := tricorder.o led.o
board/corscience/tricorder/tricorder-eeprom.c deleted +0 -251
251 lines not on this page · raw message
board/corscience/tricorder/tricorder-eeprom.h deleted +0 -41
41 lines not on this page · raw message
Signature · 1 line
2.0.0
PATCH 9/9 arm: Zap tricorder-eeprom
Dear Marek,
Quoted 10 lines · In message <[email protected]> you wrote:
This is a reimplementation of the
cmd_eepromwith the added bit where it can select I2C bus. Just remove this ugly duplication. If someone needs this code, there should be proper implementation submitted.Signed-off-by Marek Vasut <[email protected]>Cc Andreas Bie?mann <[email protected]>Cc Simon Glass <[email protected]>Cc Tom Rini <[email protected]>Cc Heiko Schocher <[email protected]>
Quoted 7 lines
--- board/corscience/tricorder/Makefile | 2 +- board/corscience/tricorder/tricorder-eeprom.c | 251 -------------------------- board/corscience/tricorder/tricorder-eeprom.h | 41 ----- 3 files changed, 1 insertion(+), 293 deletions(-) delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h
Note that I'm _not_ applying this one. This is ARM, not PPC, so it should probably go through Albert's tree instead. An ACK from the board maintainer would also be nice?
Best regards,
Wolfgang Denk
Signature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
PATCH 9/9 arm: Zap tricorder-eeprom
Quoted 23 lines · Wolfgang Denk
Dear Marek,
Quoted 12 lines · In message <[email protected]> you wrote:
This is a reimplementation of the
cmd_eepromwith the added bit where it can select I2C bus. Just remove this ugly duplication. If someone needs this code, there should be proper implementation submitted.Signed-off-by Marek Vasut <[email protected]>Cc Andreas Bie?mann <[email protected]>Cc Simon Glass <[email protected]>Cc Tom Rini <[email protected]>Cc Heiko Schocher <[email protected]>---
Quoted 7 lines
board/corscience/tricorder/Makefile | 2 +- board/corscience/tricorder/tricorder-eeprom.c | 251 -------------------------- board/corscience/tricorder/tricorder-eeprom.h | 41 ----- 3 files changed, 1 insertion(+), 293 deletions(-) delete mode 100644 board/corscience/tricorder/tricorder-eeprom.c delete mode 100644 board/corscience/tricorder/tricorder-eeprom.h
Quoted 3 lines
Note that I'm _not_ applying this one. This is ARM, not PPC, so it should probably go through Albert's tree instead. An ACK from the board maintainer would also be nice?
Yeah, let's CC Andreas on his other email.
Best regards,
Marek Vasut
PATCH 9/9 arm: Zap tricorder-eeprom
In reply to Marek VasutHi Marek,
Quoted 4 lines · Marek Vasut
This is a reimplementation of the
cmd_eepromwith the added bit where it can select I2C bus. Just remove this ugly duplication. If someone needs this code, there should be proper implementation submitted.
NAK this will break the whole tricorder board support. I'll be back at work on 2014/11/03 and will rework this code based on your eeprom cleanup then. Is that Ok for you?
Best regards
Andreas Bie?mann
PATCH 9/9 arm: Zap tricorder-eeprom
Quoted 9 lines · Andreas Bie?mann
Hi Marek,
Quoted 4 lines · Marek Vasut
This is a reimplementation of the
cmd_eepromwith the added bit where it can select I2C bus. Just remove this ugly duplication. If someone needs this code, there should be proper implementation submitted.NAK this will break the whole tricorder board support.
It doesn't break it, since it's been broken already ;-) I mean, hell, duplicating most of cmd_eeprom.c there was really a bad non-systematic idea from the get go ...
Quoted 2 lines
I'll be back at work on 2014/11/03 and will rework this code based on your eeprom cleanup then. Is that Ok for you?
Yep, please do ... thanks!
Best regards,
Marek Vasut