Update Auvitek au0828 quirks

PATCH Superseded Mauro Carvalho Chehab 3 participants 7 messages Oct 30, 2014

Subsystems (2)

Media (V4L/DVB) Sound

lore

Share & tools

lore

Mauro Carvalho Chehab

author

2014-10-30 10:53 UTC #0 lore raw

cover Update Auvitek au0828 quirks

There are several Auvitek au0828 listed at sound quirks. However, the table there is incomplete. Simplify the table using a macro for au0828 devices and update it to reflect the devices currently supported at the Linux Kernel by drivers/media/usb/au0828 driver.

Mauro Carvalho Chehab (2):
[media] sound: simplify au0828 quirk table
[media] sound: Update au0828 quirks table

 sound/usb/quirks-table.h | 166 +++++++++++------------------------------------
 1 file changed, 39 insertions(+), 127 deletions(-)

Signature · 1 line

1.9.3

Mauro Carvalho Chehab

author

2014-10-30 10:53 UTC #1 lore raw

PATCH 1/2 sound: simplify au0828 quirk table

From: Mauro Carvalho Chehab <[email protected]>

Add a macro to simplify au0828 quirk table. That makes easier to check it against the USB IDs at drivers/media/usb/au0828-card.c

Cc [email protected]

Signed-off-by Mauro Carvalho Chehab <[email protected]>

sound/usb/quirks-table.h +31 ~~-127~~

index c657752a420c..5ae1d02d17a3 100644
@@ -2804,133 +2804,37 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
-/* Hauppauge HVR-950Q and HVR-850 */
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7200),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7210),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7217),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721b),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721e),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721f),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-850",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7280),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x0fd9, 0x0008),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
+/*
+ * Auvitek au0828 devices with audio interface.
+ * This should be kept in sync with drivers/media/usb/au0828-card.c
+ * Please notice that some drivers are DVB only, and don't need to be
+ * here. That's the case, for example, of DVICO_FUSIONHDTV7.
+ */
+
+#define AU0828_DEVICE(vid, pid, vname, pname) { \
+	USB_DEVICE_VENDOR_SPEC(vid, pid), \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_INT_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+	.bInterfaceClass = USB_CLASS_AUDIO, \
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, \
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { \
+		.vendor_name = vname, \
+		.product_name = pname, \
+		.ifnum = QUIRK_ANY_INTERFACE, \
+		.type = QUIRK_AUDIO_ALIGN_TRANSFER, \
+	} \
+}
+
+AU0828_DEVICE(0x2040, 0x7200, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7210, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7217, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721b, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721e, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721f, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7240, "Hauppauge", "HVR-850"),
+AU0828_DEVICE(0x2040, 0x7280, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x0fd9, 0x0008, "Hauppauge", "HVR-950Q"),
 
 /* Digidesign Mbox */
 {

Signature · 1 line

1.9.3

Takashi Iwai

2014-10-30 11:09 UTC #2 lore raw

Re: [PATCH 1/2] [media] sound: simplify au0828 quirk table

At Thu, 30 Oct 2014 08:53:04 -0200,

Quoted 9 lines · Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>
Add a macro to simplify au0828 quirk table. That makes easier to check it against the USB IDs at drivers/media/usb/au0828-card.c
Cc [email protected]
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Signed-off-by Mauro Carvalho Chehab <[email protected]>

Which sign-off should I take? Judging from the author line, the former one? The second patch had only s-o-b from @samsung.com.

thanks,

Takashi

Quoted 173 lines

sound/usb/quirks-table.h +31 ~~-127~~

index c657752a420c..5ae1d02d17a3 100644
@@ -2804,133 +2804,37 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
-/* Hauppauge HVR-950Q and HVR-850 */
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7200),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7210),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7217),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721b),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721e),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721f),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-850",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7280),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x0fd9, 0x0008),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
+/*
+ * Auvitek au0828 devices with audio interface.
+ * This should be kept in sync with drivers/media/usb/au0828-card.c
+ * Please notice that some drivers are DVB only, and don't need to be
+ * here. That's the case, for example, of DVICO_FUSIONHDTV7.
+ */
+
+#define AU0828_DEVICE(vid, pid, vname, pname) { \
+	USB_DEVICE_VENDOR_SPEC(vid, pid), \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_INT_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+	.bInterfaceClass = USB_CLASS_AUDIO, \
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, \
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { \
+		.vendor_name = vname, \
+		.product_name = pname, \
+		.ifnum = QUIRK_ANY_INTERFACE, \
+		.type = QUIRK_AUDIO_ALIGN_TRANSFER, \
+	} \
+}
+
+AU0828_DEVICE(0x2040, 0x7200, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7210, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7217, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721b, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721e, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721f, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7240, "Hauppauge", "HVR-850"),
+AU0828_DEVICE(0x2040, 0x7280, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x0fd9, 0x0008, "Hauppauge", "HVR-950Q"),
 
 /* Digidesign Mbox */
 {

Signature · 1 line

1.9.3

Mauro Carvalho Chehab

author

2014-10-30 11:15 UTC #3 lore raw

Re: [PATCH 1/2] [media] sound: simplify au0828 quirk table

Em Thu, 30 Oct 2014 12:09:07 +0100
Takashi Iwai <[email protected]> escreveu:

Quoted 8 lines

At Thu, 30 Oct 2014 08:53:04 -0200,
Quoted 6 lines · Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <[email protected]>
Add a macro to simplify au0828 quirk table. That makes easier to check it against the USB IDs at drivers/media/usb/au0828-card.c

Quoted 6 lines

Quoted 3 lines
Cc [email protected]
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Signed-off-by Mauro Carvalho Chehab <[email protected]>
Which sign-off should I take? Judging from the author line, the former one?

Gah, that's the problem with rebased patches ;)

I started using [email protected] for upstream submission a few months ago.

Both emails are valid, but I prefer if you use this one:

Signed-off-by Mauro Carvalho Chehab <[email protected]>

Quoted 1 line

The second patch had only s-o-b from @samsung.com.

Yeah, I remembered to remove the extra SOB on the second patch, but didn't notice it on the first one.

Quoted 179 lines

thanks,

Takashi

Quoted 173 lines

sound/usb/quirks-table.h +31 ~~-127~~

index c657752a420c..5ae1d02d17a3 100644
@@ -2804,133 +2804,37 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
-/* Hauppauge HVR-950Q and HVR-850 */
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7200),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7210),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7217),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721b),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721e),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x721f),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7240),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-850",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x2040, 0x7280),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
-{
-	USB_DEVICE_VENDOR_SPEC(0x0fd9, 0x0008),
-	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
-		       USB_DEVICE_ID_MATCH_INT_CLASS |
-		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
-	.bInterfaceClass = USB_CLASS_AUDIO,
-	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.vendor_name = "Hauppauge",
-		.product_name = "HVR-950Q",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_ALIGN_TRANSFER,
-	}
-},
+/*
+ * Auvitek au0828 devices with audio interface.
+ * This should be kept in sync with drivers/media/usb/au0828-card.c
+ * Please notice that some drivers are DVB only, and don't need to be
+ * here. That's the case, for example, of DVICO_FUSIONHDTV7.
+ */
+
+#define AU0828_DEVICE(vid, pid, vname, pname) { \
+	USB_DEVICE_VENDOR_SPEC(vid, pid), \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_INT_CLASS | \
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
+	.bInterfaceClass = USB_CLASS_AUDIO, \
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, \
+	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { \
+		.vendor_name = vname, \
+		.product_name = pname, \
+		.ifnum = QUIRK_ANY_INTERFACE, \
+		.type = QUIRK_AUDIO_ALIGN_TRANSFER, \
+	} \
+}
+
+AU0828_DEVICE(0x2040, 0x7200, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7210, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7217, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721b, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721e, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x721f, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7240, "Hauppauge", "HVR-850"),
+AU0828_DEVICE(0x2040, 0x7280, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x0fd9, 0x0008, "Hauppauge", "HVR-950Q"),
 
 /* Digidesign Mbox */
 {

Signature · 1 line

1.9.3

Clemens Ladisch

2014-10-30 11:16 UTC #4 lore raw

Re: [alsa-devel] [PATCH 1/2] [media] sound: simplify au0828 quirk table

In reply to Mauro Carvalho Chehab

Quoted 6 lines · Mauro Carvalho Chehab

Add a macro to simplify au0828 quirk table. That makes easier to check it against the USB IDs at drivers/media/usb/au0828-card.c
+++ b/sound/usb/quirks-table.h
...
+ * This should be kept in sync with drivers/media/usb/au0828-card.c

The file does not exist in that directory. And when you want to keep two files in sync, you need such reminders in both of them.

Regards,
Clemens

Mauro Carvalho Chehab

author

2014-10-30 11:28 UTC #5 lore raw

Re: [alsa-devel] [PATCH 1/2] [media] sound: simplify au0828 quirk table

Em Thu, 30 Oct 2014 12:16:13 +0100
Clemens Ladisch <[email protected]> escreveu:

Quoted 10 lines

Quoted 6 lines · Mauro Carvalho Chehab
Add a macro to simplify au0828 quirk table. That makes easier to check it against the USB IDs at drivers/media/usb/au0828-card.c
+++ b/sound/usb/quirks-table.h
...
+ * This should be kept in sync with drivers/media/usb/au0828-card.c
The file does not exist in that directory. And when you want to keep two files in sync, you need such reminders in both of them.

Thanks for reviewing it.

I'm sending an updated version with those fixes.

Regards,
Mauro

Mauro Carvalho Chehab

author

2014-10-30 10:53 UTC #6 lore raw

PATCH 2/2 sound: Update au0828 quirks table

In reply to Mauro Carvalho Chehab

From: Mauro Carvalho Chehab <[email protected]>

The au0828 quirks table is currently not in sync with the au0828 media driver.

Syncronize it and put them on the same order as found at au0828 driver, as all the au0828 devices with analog TV need the same quirks.

Cc [email protected]

Signed-off-by Mauro Carvalho Chehab <[email protected]>

sound/usb/quirks-table.h +9 -1

index 5ae1d02d17a3..8a6b366f2925 100644
@@ -2827,14 +2827,22 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 }
 
 AU0828_DEVICE(0x2040, 0x7200, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7240, "Hauppauge", "HVR-850"),
 AU0828_DEVICE(0x2040, 0x7210, "Hauppauge", "HVR-950Q"),
 AU0828_DEVICE(0x2040, 0x7217, "Hauppauge", "HVR-950Q"),
 AU0828_DEVICE(0x2040, 0x721b, "Hauppauge", "HVR-950Q"),
 AU0828_DEVICE(0x2040, 0x721e, "Hauppauge", "HVR-950Q"),
 AU0828_DEVICE(0x2040, 0x721f, "Hauppauge", "HVR-950Q"),
-AU0828_DEVICE(0x2040, 0x7240, "Hauppauge", "HVR-850"),
 AU0828_DEVICE(0x2040, 0x7280, "Hauppauge", "HVR-950Q"),
 AU0828_DEVICE(0x0fd9, 0x0008, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7201, "Hauppauge", "HVR-950Q-MXL"),
+AU0828_DEVICE(0x2040, 0x7211, "Hauppauge", "HVR-950Q-MXL"),
+AU0828_DEVICE(0x2040, 0x7281, "Hauppauge", "HVR-950Q-MXL"),
+AU0828_DEVICE(0x05e1, 0x0480, "Hauppauge", "Woodbury"),
+AU0828_DEVICE(0x2040, 0x8200, "Hauppauge", "Woodbury"),
+AU0828_DEVICE(0x2040, 0x7260, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7213, "Hauppauge", "HVR-950Q"),
+AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
 
 /* Digidesign Mbox */
 {

Signature · 1 line

1.9.3