Query on the ci_udc driver for USB client implementation
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace.
The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?
Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
Hope i am asking the right questions.
Thanks & Regards,
Sanchayan Maity.
Hello,
Any pointers?
Thanks & Regards,
Sanchayan Maity.
Quoted 15 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
Hope i am asking the right questions.
Thanks & Regards,
Sanchayan Maity.
Quoted 3 lines · Sanchayan Maity
Hello,
Any pointers?
Adding Marek and Stefan on Cc in case they can provide some help.
Regards,
Fabio Estevam
Quoted 24 lines
Thanks & Regards,
Sanchayan Maity.Quoted 6 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.Quoted 9 lines
The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
Hope i am asking the right questions.
Thanks & Regards,
Sanchayan Maity._______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Quoted 5 lines · Fabio Estevam
On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity
Quoted 2 lines · <[email protected]> wrote:
Hello,
Quoted 32 lines
Quoted 1 line
Any pointers?
Adding Marek and Stefan on Cc in case they can provide some help.
Regards,
Fabio Estevam
Quoted 24 lines
Thanks & Regards,
Sanchayan Maity.Quoted 20 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?
See include/configs/sansa_fuze_plus.h , you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected via CONFIG_USB_ETH_CDC ).
An example of DFU/UMS can be found in include/configs/exynos4-common.h and to activate those, you need to use the 'dfu' or 'ums' commands.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
There isn't any, so ask away ;-)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Hope i am asking the right questions.
[...]
Best regards,
Marek Vasut
Quoted 39 lines · Marek Vasut
Quoted 5 lines · Fabio Estevam
On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity
Quoted 2 lines · <[email protected]> wrote:
Hello,
Quoted 32 lines
Quoted 1 line
Any pointers?
Adding Marek and Stefan on Cc in case they can provide some help.
Regards,
Fabio Estevam
Quoted 24 lines
Thanks & Regards,
Sanchayan Maity.Quoted 20 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?
Quoted 6 lines
See
include/configs/sansa_fuze_plus.h, you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected viaCONFIG_USB_ETH_CDC).An example of DFU/UMS can be found in
include/configs/exynos4-common.hand to activate those, you need to use the 'dfu' or 'ums' commands.
Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel.
Thanks again for your inputs. Cheers!
Best Regards,
Sanchayan.
Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
There isn't any, so ask away ;-)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Hope i am asking the right questions.
[...]
Best regards,
Marek Vasut
Hi Sanchayan,
Quoted 49 lines · Marek Vasut
Quoted 40 lines · Fabio Estevam
Quoted 5 lines
On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity
Quoted 2 lines · <[email protected]> wrote:
Hello,
Quoted 33 lines
Quoted 1 line
Any pointers?
Adding Marek and Stefan on Cc in case they can provide some help.
Regards,
Fabio Estevam
Quoted 25 lines
Thanks & Regards,
Sanchayan Maity.Quoted 21 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?Quoted 7 lines
See
include/configs/sansa_fuze_plus.h, you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected viaCONFIG_USB_ETH_CDC).An example of DFU/UMS can be found in
include/configs/exynos4-common.hand to activate those, you need to use the 'dfu' or 'ums' commands.
Quoted 7 lines
Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel.
I'm very happy that UMS is working seamlessly. What kind of trouble do you have with DFU?
Quoted 19 lines
Thanks again for your inputs. Cheers!
Best Regards,
Sanchayan.Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
There isn't any, so ask away ;-)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Hope i am asking the right questions.
[...]
Best regards,
Marek Vasut
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
Quoted 59 lines · Lukasz Majewski
Hi Sanchayan,
Quoted 49 lines · Marek Vasut
Quoted 40 lines · Fabio Estevam
Quoted 5 lines
On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity
Quoted 2 lines · <[email protected]> wrote:
Hello,
Quoted 33 lines
Quoted 1 line
Any pointers?
Adding Marek and Stefan on Cc in case they can provide some help.
Regards,
Fabio Estevam
Quoted 25 lines
Thanks & Regards,
Sanchayan Maity.Quoted 21 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?Quoted 7 lines
See
include/configs/sansa_fuze_plus.h, you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected viaCONFIG_USB_ETH_CDC).An example of DFU/UMS can be found in
include/configs/exynos4-common.hand to activate those, you need to use the 'dfu' or 'ums' commands.Quoted 7 lines
Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel.
Quoted 2 lines
I'm very happy that UMS is working seamlessly. What kind of trouble do you have with DFU?
Hello,
I have a memory alignment problem with DFU as of now.
mtdparts is as below
device nand0 <fsl_nfc>, # parts = 4
#: name size offset mask_flags 0: vf-bcb 0x00020000 0x00000000 1 1: u-boot 0x00160000 0x00020000 1 2: u-boot-env 0x00080000 0x00180000 0 3: ubi 0x3fe00000 0x00200000 0
active partition: nand0,0 - (vf-bcb) 0x00020000 @ 0x00000000
defaults:
mtdids : nand0=fsl_nfc
mtdparts: mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),-(ubi)
As per the above, setenv dfu_alt_info "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" and CONFIG_SYS_CACHELINE_SIZE is 32.
I have a ubifs image and i was trying to write it by running "dfu 0 nand 4" in u-boot and "sudo dfu-util -D ubifs.img -a ubi" on the host. I got the error as below.
"dfu_get_buf: Could not memalign 0x800000 bytes
Setting CONFIG_SYS_DFU_DATA_BUF_SIZE to (1024*1024) resolved this. After this, trying an update as above, did not give me an updated ubi (which i check by booting to user space) and doing a nand erase.part on ubi partition and then repeating the procedure results in ""Bad Linux ARM zImage magic!". After looking a bit online, at the below two links
http://lists.denx.de/pipermail/u-boot/2013-May/155089.html
http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifs
I started trying ubinize. Getting the memory alignment issues again now :). I have tried 1, 2, 4 and 8Mb for the dfu data buffer size. So i am trying to figure this out at the moment. I am probably missing something. :)
--Best Regards,
Sanchayan.
Quoted 23 lines
Quoted 20 lines
Thanks again for your inputs. Cheers!
Best Regards,
Sanchayan.Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
There isn't any, so ask away ;-)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Hope i am asking the right questions.
[...]
Best regards,
Marek Vasut
Hi Sanchayan,
Quoted 102 lines · Lukasz Majewski
Quoted 61 lines
Hi Sanchayan,
Quoted 50 lines · Marek Vasut
Quoted 41 lines · Fabio Estevam
Quoted 5 lines
On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity
Quoted 2 lines · <[email protected]> wrote:
Hello,
Quoted 34 lines
Quoted 1 line
Any pointers?
Adding Marek and Stefan on Cc in case they can provide some help.
Regards,
Fabio Estevam
Quoted 26 lines
Thanks & Regards,
Sanchayan Maity.Quoted 22 lines · Sanchayan Maity
Hello,
I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working.
For the host side, usb start calls
usb_init(), which in turns call,usb_lowlevel_init(), from there into theehic_hcd_init()of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up theusb_ehci,ehci_hccrandechi_hcorstructures was all. The flow and setup required i was able to trace.The USB client part is not clear to me. I was thinking i can use the
ci_udcdriver somehow to implement the client part. How can i use theci_udcdriver to implement client functionality?. From what i could see, theusb_gadget_driver_register()is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host?Quoted 7 lines
See
include/configs/sansa_fuze_plus.h, you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected viaCONFIG_USB_ETH_CDC).An example of DFU/UMS can be found in
include/configs/exynos4-common.hand to activate those, you need to use the 'dfu' or 'ums' commands.Quoted 8 lines
Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel.
Quoted 2 lines
I'm very happy that UMS is working seamlessly. What kind of trouble do you have with DFU?
Hello,
I have a memory alignment problem with DFU as of now.
mtdparts is as below
device nand0 <fsl_nfc>, # parts = 4#: name size offset mask_flags 0: vf-bcb 0x00020000 0x00000000 1 1: u-boot 0x00160000 0x00020000 1 2: u-boot-env 0x00080000 0x00180000 0 3: ubi 0x3fe00000 0x00200000 0active partition: nand0,0 - (vf-bcb)
0x00020000@0x00000000defaults:
mtdids : nand0=fsl_nfc
mtdparts:
mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),-(ubi)As per the above, setenv
dfu_alt_info"vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" andCONFIG_SYS_CACHELINE_SIZEis 32.I have a ubifs image and i was trying to write it by running "dfu 0 nand 4" in u-boot and "sudo dfu-util -D ubifs.img -a ubi" on the host. I got the error as below.
"
dfu_get_buf: Could not memalign0x800000bytesSetting
CONFIG_SYS_DFU_DATA_BUF_SIZEto (1024*1024) resolved this. After this, trying an update as above, did not give me an updated ubi (which i check by booting to user space) and doing a nand erase.part on ubi partition and then repeating the procedure results in ""Bad Linux ARM zImage magic!". After looking a bit online, at the below two links
Quoted 7 lines
http://lists.denx.de/pipermail/u-boot/2013-May/155089.html
http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifsI started trying ubinize. Getting the memory alignment issues again now :). I have tried 1, 2, 4 and 8Mb for the dfu data buffer size. So i am trying to figure this out at the moment. I am probably missing something. :)
On our boards we have eMMC memory, so I'm not so familiar with NAND DFU problems.
However, I would advise you to pose this question to any of AM335x boards maintainer (e.g. Tom Rini) since they use NAND on their boards.
Quoted 27 lines
--Best Regards,
Sanchayan.Quoted 23 lines
Quoted 20 lines
Thanks again for your inputs. Cheers!
Best Regards,
Sanchayan.Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list.
There isn't any, so ask away ;-)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Hope i am asking the right questions.
[...]
Best regards,
Marek Vasut
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group