Adds support for Exynos5422 odroid xu3 board

This patch fixes wrong GPIO information such as GPIO bank, table which is used to convert GPIO name to index, bank base address, and etc.

Signed-off-by Hyungwon Hwang <[email protected]>

Cc Minkyu Kang <[email protected]>

Cc Lukasz Majewski <[email protected]>

---
 arch/arm/include/asm/arch-exynos/cpu.h  |  11 +-
 arch/arm/include/asm/arch-exynos/gpio.h | 232

+++++++++++++++----------------- 2 files changed, 117 insertions(+), 126 deletions(-)

(quoted diff) +0 -0

b/arch/arm/include/asm/arch-exynos/cpu.h index 7c5c4ff..da4ac6b 100644

arch/arm/include/asm/arch-exynos/cpu.h +5 -6

@@ -139,7 +139,7 @@
 
 /* EXYNOS5420 */
 #define EXYNOS5420_AUDIOSS_BASE		0x03810000
-#define EXYNOS5420_GPIO_PART6_BASE	0x03860000
+#define EXYNOS5420_GPIO_PART5_BASE	0x03860000
 #define EXYNOS5420_PRO_ID		0x10000000
 #define EXYNOS5420_CLOCK_BASE		0x10010000
 #define EXYNOS5420_POWER_BASE		0x10040000

@@ -161,11 +161,10 @@
 #define EXYNOS5420_I2S_BASE		0x12D60000
 #define EXYNOS5420_PWMTIMER_BASE	0x12DD0000
 #define EXYNOS5420_SPI_ISP_BASE		0x131A0000
-#define EXYNOS5420_GPIO_PART2_BASE	0x13400000
-#define EXYNOS5420_GPIO_PART3_BASE	0x13400C00
-#define EXYNOS5420_GPIO_PART4_BASE	0x13410000
-#define EXYNOS5420_GPIO_PART5_BASE	0x14000000
-#define EXYNOS5420_GPIO_PART1_BASE	0x14010000
+#define EXYNOS5420_GPIO_PART1_BASE	0x13400000
+#define EXYNOS5420_GPIO_PART2_BASE	0x13410000
+#define EXYNOS5420_GPIO_PART3_BASE	0x14000000
+#define EXYNOS5420_GPIO_PART4_BASE	0x14010000
 #define EXYNOS5420_MIPI_DSIM_BASE	0x14500000
 #define EXYNOS5420_DP_BASE		0x145B0000
 

(quoted diff) +0 -0

b/arch/arm/include/asm/arch-exynos/gpio.h index 32e045a..431ae3a 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h

arch/arm/include/asm/arch-exynos/gpio.h +105 -112

@@ -1028,83 +1028,7 @@ enum exynos5_gpio_pin {
 };
 
 enum exynos5420_gpio_pin {
-	/* GPIO_PART1_STARTS */
-	EXYNOS5420_GPIO_A00,		/* 0 */
-	EXYNOS5420_GPIO_A01,
-	EXYNOS5420_GPIO_A02,
-	EXYNOS5420_GPIO_A03,
-	EXYNOS5420_GPIO_A04,
-	EXYNOS5420_GPIO_A05,
-	EXYNOS5420_GPIO_A06,
-	EXYNOS5420_GPIO_A07,
-	EXYNOS5420_GPIO_A10,		/* 8 */
-	EXYNOS5420_GPIO_A11,
-	EXYNOS5420_GPIO_A12,
-	EXYNOS5420_GPIO_A13,
-	EXYNOS5420_GPIO_A14,
-	EXYNOS5420_GPIO_A15,
-	EXYNOS5420_GPIO_A16,
-	EXYNOS5420_GPIO_A17,
-	EXYNOS5420_GPIO_A20,		/* 16 0x10 */
-	EXYNOS5420_GPIO_A21,
-	EXYNOS5420_GPIO_A22,
-	EXYNOS5420_GPIO_A23,
-	EXYNOS5420_GPIO_A24,
-	EXYNOS5420_GPIO_A25,
-	EXYNOS5420_GPIO_A26,
-	EXYNOS5420_GPIO_A27,
-	EXYNOS5420_GPIO_B00,		/* 24 0x18 */
-	EXYNOS5420_GPIO_B01,
-	EXYNOS5420_GPIO_B02,
-	EXYNOS5420_GPIO_B03,
-	EXYNOS5420_GPIO_B04,
-	EXYNOS5420_GPIO_B05,
-	EXYNOS5420_GPIO_B06,
-	EXYNOS5420_GPIO_B07,
-	EXYNOS5420_GPIO_B10,		/* 32 0x20 */
-	EXYNOS5420_GPIO_B11,
-	EXYNOS5420_GPIO_B12,
-	EXYNOS5420_GPIO_B13,
-	EXYNOS5420_GPIO_B14,
-	EXYNOS5420_GPIO_B15,
-	EXYNOS5420_GPIO_B16,
-	EXYNOS5420_GPIO_B17,
-	EXYNOS5420_GPIO_B20,		/* 40 0x28 */
-	EXYNOS5420_GPIO_B21,
-	EXYNOS5420_GPIO_B22,
-	EXYNOS5420_GPIO_B23,
-	EXYNOS5420_GPIO_B24,
-	EXYNOS5420_GPIO_B25,
-	EXYNOS5420_GPIO_B26,
-	EXYNOS5420_GPIO_B27,
-	EXYNOS5420_GPIO_B30,		/* 48 0x30 */
-	EXYNOS5420_GPIO_B31,
-	EXYNOS5420_GPIO_B32,
-	EXYNOS5420_GPIO_B33,
-	EXYNOS5420_GPIO_B34,
-	EXYNOS5420_GPIO_B35,
-	EXYNOS5420_GPIO_B36,
-	EXYNOS5420_GPIO_B37,
-	EXYNOS5420_GPIO_B40,		/* 56 0x38 */
-	EXYNOS5420_GPIO_B41,
-	EXYNOS5420_GPIO_B42,
-	EXYNOS5420_GPIO_B43,
-	EXYNOS5420_GPIO_B44,
-	EXYNOS5420_GPIO_B45,
-	EXYNOS5420_GPIO_B46,
-	EXYNOS5420_GPIO_B47,
-	EXYNOS5420_GPIO_H00,		/* 64 0x40 */
-	EXYNOS5420_GPIO_H01,
-	EXYNOS5420_GPIO_H02,
-	EXYNOS5420_GPIO_H03,
-	EXYNOS5420_GPIO_H04,
-	EXYNOS5420_GPIO_H05,
-	EXYNOS5420_GPIO_H06,
-	EXYNOS5420_GPIO_H07,
-
-	/* GPIO PART 2 STARTS*/
-	EXYNOS5420_GPIO_MAX_PORT_PART_1,/* 72 0x48 */
-	EXYNOS5420_GPIO_Y70 = EXYNOS5420_GPIO_MAX_PORT_PART_1,
+	EXYNOS5420_GPIO_Y70,
 	EXYNOS5420_GPIO_Y71,
 	EXYNOS5420_GPIO_Y72,
 	EXYNOS5420_GPIO_Y73,

@@ -1112,10 +1036,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y75,
 	EXYNOS5420_GPIO_Y76,
 	EXYNOS5420_GPIO_Y77,
-
-	/* GPIO PART 3 STARTS*/
-	EXYNOS5420_GPIO_MAX_PORT_PART_2,/* 80 0x50 */
-	EXYNOS5420_GPIO_X00 = EXYNOS5420_GPIO_MAX_PORT_PART_2,
+	EXYNOS5420_GPIO_X00,
 	EXYNOS5420_GPIO_X01,
 	EXYNOS5420_GPIO_X02,
 	EXYNOS5420_GPIO_X03,

@@ -1123,7 +1044,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_X05,
 	EXYNOS5420_GPIO_X06,
 	EXYNOS5420_GPIO_X07,
-	EXYNOS5420_GPIO_X10,		/* 88 0x58 */
+	EXYNOS5420_GPIO_X10,
 	EXYNOS5420_GPIO_X11,
 	EXYNOS5420_GPIO_X12,
 	EXYNOS5420_GPIO_X13,

@@ -1131,7 +1052,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_X15,
 	EXYNOS5420_GPIO_X16,
 	EXYNOS5420_GPIO_X17,
-	EXYNOS5420_GPIO_X20,		/* 96 0x60 */
+	EXYNOS5420_GPIO_X20,
 	EXYNOS5420_GPIO_X21,
 	EXYNOS5420_GPIO_X22,
 	EXYNOS5420_GPIO_X23,

@@ -1139,7 +1060,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_X25,
 	EXYNOS5420_GPIO_X26,
 	EXYNOS5420_GPIO_X27,
-	EXYNOS5420_GPIO_X30,		/* 104 0x68 */
+	EXYNOS5420_GPIO_X30,
 	EXYNOS5420_GPIO_X31,
 	EXYNOS5420_GPIO_X32,
 	EXYNOS5420_GPIO_X33,

@@ -1148,9 +1069,8 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_X36,
 	EXYNOS5420_GPIO_X37,
 
-	/* GPIO PART 4 STARTS*/
-	EXYNOS5420_GPIO_MAX_PORT_PART_3,/* 112 0x70 */
-	EXYNOS5420_GPIO_C00 = EXYNOS5420_GPIO_MAX_PORT_PART_3,
+	EXYNOS5420_GPIO_MAX_PORT_PART_1,
+	EXYNOS5420_GPIO_C00 = EXYNOS5420_GPIO_MAX_PORT_PART_1,
 	EXYNOS5420_GPIO_C01,
 	EXYNOS5420_GPIO_C02,
 	EXYNOS5420_GPIO_C03,

@@ -1158,7 +1078,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_C05,
 	EXYNOS5420_GPIO_C06,
 	EXYNOS5420_GPIO_C07,
-	EXYNOS5420_GPIO_C10,		/* 120 0x78 */
+	EXYNOS5420_GPIO_C10,
 	EXYNOS5420_GPIO_C11,
 	EXYNOS5420_GPIO_C12,
 	EXYNOS5420_GPIO_C13,

@@ -1166,7 +1086,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_C15,
 	EXYNOS5420_GPIO_C16,
 	EXYNOS5420_GPIO_C17,
-	EXYNOS5420_GPIO_C20,		/* 128 0x80 */
+	EXYNOS5420_GPIO_C20,
 	EXYNOS5420_GPIO_C21,
 	EXYNOS5420_GPIO_C22,
 	EXYNOS5420_GPIO_C23,

@@ -1174,7 +1094,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_C25,
 	EXYNOS5420_GPIO_C26,
 	EXYNOS5420_GPIO_C27,
-	EXYNOS5420_GPIO_C30,		/* 136 0x88 */
+	EXYNOS5420_GPIO_C30,
 	EXYNOS5420_GPIO_C31,
 	EXYNOS5420_GPIO_C32,
 	EXYNOS5420_GPIO_C33,

@@ -1182,7 +1102,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_C35,
 	EXYNOS5420_GPIO_C36,
 	EXYNOS5420_GPIO_C37,
-	EXYNOS5420_GPIO_C40,		/* 144 0x90 */
+	EXYNOS5420_GPIO_C40,
 	EXYNOS5420_GPIO_C41,
 	EXYNOS5420_GPIO_C42,
 	EXYNOS5420_GPIO_C43,

@@ -1190,7 +1110,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_C45,
 	EXYNOS5420_GPIO_C46,
 	EXYNOS5420_GPIO_C47,
-	EXYNOS5420_GPIO_D10,		/* 152 0x98 */
+	EXYNOS5420_GPIO_D10,
 	EXYNOS5420_GPIO_D11,
 	EXYNOS5420_GPIO_D12,
 	EXYNOS5420_GPIO_D13,

@@ -1198,7 +1118,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_D15,
 	EXYNOS5420_GPIO_D16,
 	EXYNOS5420_GPIO_D17,
-	EXYNOS5420_GPIO_Y00,		/* 160 0xa0 */
+	EXYNOS5420_GPIO_Y00,
 	EXYNOS5420_GPIO_Y01,
 	EXYNOS5420_GPIO_Y02,
 	EXYNOS5420_GPIO_Y03,

@@ -1206,7 +1126,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y05,
 	EXYNOS5420_GPIO_Y06,
 	EXYNOS5420_GPIO_Y07,
-	EXYNOS5420_GPIO_Y10,		/* 168 0xa8 */
+	EXYNOS5420_GPIO_Y10,
 	EXYNOS5420_GPIO_Y11,
 	EXYNOS5420_GPIO_Y12,
 	EXYNOS5420_GPIO_Y13,

@@ -1214,7 +1134,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y15,
 	EXYNOS5420_GPIO_Y16,
 	EXYNOS5420_GPIO_Y17,
-	EXYNOS5420_GPIO_Y20,		/* 176 0xb0 */
+	EXYNOS5420_GPIO_Y20,
 	EXYNOS5420_GPIO_Y21,
 	EXYNOS5420_GPIO_Y22,
 	EXYNOS5420_GPIO_Y23,

@@ -1222,7 +1142,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y25,
 	EXYNOS5420_GPIO_Y26,
 	EXYNOS5420_GPIO_Y27,
-	EXYNOS5420_GPIO_Y30,		/* 184 0xb8 */
+	EXYNOS5420_GPIO_Y30,
 	EXYNOS5420_GPIO_Y31,
 	EXYNOS5420_GPIO_Y32,
 	EXYNOS5420_GPIO_Y33,

@@ -1230,7 +1150,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y35,
 	EXYNOS5420_GPIO_Y36,
 	EXYNOS5420_GPIO_Y37,
-	EXYNOS5420_GPIO_Y40,		/* 192 0xc0 */
+	EXYNOS5420_GPIO_Y40,
 	EXYNOS5420_GPIO_Y41,
 	EXYNOS5420_GPIO_Y42,
 	EXYNOS5420_GPIO_Y43,

@@ -1238,7 +1158,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y45,
 	EXYNOS5420_GPIO_Y46,
 	EXYNOS5420_GPIO_Y47,
-	EXYNOS5420_GPIO_Y50,		/* 200 0xc8 */
+	EXYNOS5420_GPIO_Y50,
 	EXYNOS5420_GPIO_Y51,
 	EXYNOS5420_GPIO_Y52,
 	EXYNOS5420_GPIO_Y53,

@@ -1246,7 +1166,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y55,
 	EXYNOS5420_GPIO_Y56,
 	EXYNOS5420_GPIO_Y57,
-	EXYNOS5420_GPIO_Y60,		/* 208 0xd0 */
+	EXYNOS5420_GPIO_Y60,
 	EXYNOS5420_GPIO_Y61,
 	EXYNOS5420_GPIO_Y62,
 	EXYNOS5420_GPIO_Y63,

@@ -1255,9 +1175,8 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_Y66,
 	EXYNOS5420_GPIO_Y67,
 
-	/* GPIO_PART5_STARTS */
-	EXYNOS5420_GPIO_MAX_PORT_PART_4,/* 216 0xd8 */
-	EXYNOS5420_GPIO_E00 = EXYNOS5420_GPIO_MAX_PORT_PART_4,
+	EXYNOS5420_GPIO_MAX_PORT_PART_2,
+	EXYNOS5420_GPIO_E00 = EXYNOS5420_GPIO_MAX_PORT_PART_2,
 	EXYNOS5420_GPIO_E01,
 	EXYNOS5420_GPIO_E02,
 	EXYNOS5420_GPIO_E03,

@@ -1265,7 +1184,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_E05,
 	EXYNOS5420_GPIO_E06,
 	EXYNOS5420_GPIO_E07,
-	EXYNOS5420_GPIO_E10,		/* 224 0xe0 */
+	EXYNOS5420_GPIO_E10,
 	EXYNOS5420_GPIO_E11,
 	EXYNOS5420_GPIO_E12,
 	EXYNOS5420_GPIO_E13,

@@ -1273,7 +1192,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_E15,
 	EXYNOS5420_GPIO_E16,
 	EXYNOS5420_GPIO_E17,
-	EXYNOS5420_GPIO_F00,		/* 232 0xe8 */
+	EXYNOS5420_GPIO_F00,
 	EXYNOS5420_GPIO_F01,
 	EXYNOS5420_GPIO_F02,
 	EXYNOS5420_GPIO_F03,

@@ -1281,7 +1200,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_F05,
 	EXYNOS5420_GPIO_F06,
 	EXYNOS5420_GPIO_F07,
-	EXYNOS5420_GPIO_F10,		/* 240 0xf0 */
+	EXYNOS5420_GPIO_F10,
 	EXYNOS5420_GPIO_F11,
 	EXYNOS5420_GPIO_F12,
 	EXYNOS5420_GPIO_F13,

@@ -1289,7 +1208,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_F15,
 	EXYNOS5420_GPIO_F16,
 	EXYNOS5420_GPIO_F17,
-	EXYNOS5420_GPIO_G00,		/* 248 0xf8 */
+	EXYNOS5420_GPIO_G00,
 	EXYNOS5420_GPIO_G01,
 	EXYNOS5420_GPIO_G02,
 	EXYNOS5420_GPIO_G03,

@@ -1297,7 +1216,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_G05,
 	EXYNOS5420_GPIO_G06,
 	EXYNOS5420_GPIO_G07,
-	EXYNOS5420_GPIO_G10,		/* 256 0x100 */
+	EXYNOS5420_GPIO_G10,
 	EXYNOS5420_GPIO_G11,
 	EXYNOS5420_GPIO_G12,
 	EXYNOS5420_GPIO_G13,

@@ -1305,7 +1224,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_G15,
 	EXYNOS5420_GPIO_G16,
 	EXYNOS5420_GPIO_G17,
-	EXYNOS5420_GPIO_G20,		/* 264 0x108 */
+	EXYNOS5420_GPIO_G20,
 	EXYNOS5420_GPIO_G21,
 	EXYNOS5420_GPIO_G22,
 	EXYNOS5420_GPIO_G23,

@@ -1313,7 +1232,7 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_G25,
 	EXYNOS5420_GPIO_G26,
 	EXYNOS5420_GPIO_G27,
-	EXYNOS5420_GPIO_J40,		/* 272 0x110 */
+	EXYNOS5420_GPIO_J40,
 	EXYNOS5420_GPIO_J41,
 	EXYNOS5420_GPIO_J42,
 	EXYNOS5420_GPIO_J43,

@@ -1322,15 +1241,89 @@ enum exynos5420_gpio_pin {
 	EXYNOS5420_GPIO_J46,
 	EXYNOS5420_GPIO_J47,
 
-	/* GPIO_PART6_STARTS */
-	EXYNOS5420_GPIO_MAX_PORT_PART_5,/* 280 0x118 */
-	EXYNOS5420_GPIO_Z0 = EXYNOS5420_GPIO_MAX_PORT_PART_5,
+	EXYNOS5420_GPIO_MAX_PORT_PART_3,
+	EXYNOS5420_GPIO_A00 = EXYNOS5420_GPIO_MAX_PORT_PART_3,
+	EXYNOS5420_GPIO_A01,
+	EXYNOS5420_GPIO_A02,
+	EXYNOS5420_GPIO_A03,
+	EXYNOS5420_GPIO_A04,
+	EXYNOS5420_GPIO_A05,
+	EXYNOS5420_GPIO_A06,
+	EXYNOS5420_GPIO_A07,
+	EXYNOS5420_GPIO_A10,
+	EXYNOS5420_GPIO_A11,
+	EXYNOS5420_GPIO_A12,
+	EXYNOS5420_GPIO_A13,
+	EXYNOS5420_GPIO_A14,
+	EXYNOS5420_GPIO_A15,
+	EXYNOS5420_GPIO_A16,
+	EXYNOS5420_GPIO_A17,
+	EXYNOS5420_GPIO_A20,
+	EXYNOS5420_GPIO_A21,
+	EXYNOS5420_GPIO_A22,
+	EXYNOS5420_GPIO_A23,
+	EXYNOS5420_GPIO_A24,
+	EXYNOS5420_GPIO_A25,
+	EXYNOS5420_GPIO_A26,
+	EXYNOS5420_GPIO_A27,
+	EXYNOS5420_GPIO_B00,
+	EXYNOS5420_GPIO_B01,
+	EXYNOS5420_GPIO_B02,
+	EXYNOS5420_GPIO_B03,
+	EXYNOS5420_GPIO_B04,
+	EXYNOS5420_GPIO_B05,
+	EXYNOS5420_GPIO_B06,
+	EXYNOS5420_GPIO_B07,
+	EXYNOS5420_GPIO_B10,
+	EXYNOS5420_GPIO_B11,
+	EXYNOS5420_GPIO_B12,
+	EXYNOS5420_GPIO_B13,
+	EXYNOS5420_GPIO_B14,
+	EXYNOS5420_GPIO_B15,
+	EXYNOS5420_GPIO_B16,
+	EXYNOS5420_GPIO_B17,
+	EXYNOS5420_GPIO_B20,
+	EXYNOS5420_GPIO_B21,
+	EXYNOS5420_GPIO_B22,
+	EXYNOS5420_GPIO_B23,
+	EXYNOS5420_GPIO_B24,
+	EXYNOS5420_GPIO_B25,
+	EXYNOS5420_GPIO_B26,
+	EXYNOS5420_GPIO_B27,
+	EXYNOS5420_GPIO_B30,
+	EXYNOS5420_GPIO_B31,
+	EXYNOS5420_GPIO_B32,
+	EXYNOS5420_GPIO_B33,
+	EXYNOS5420_GPIO_B34,
+	EXYNOS5420_GPIO_B35,
+	EXYNOS5420_GPIO_B36,
+	EXYNOS5420_GPIO_B37,
+	EXYNOS5420_GPIO_B40,
+	EXYNOS5420_GPIO_B41,
+	EXYNOS5420_GPIO_B42,
+	EXYNOS5420_GPIO_B43,
+	EXYNOS5420_GPIO_B44,
+	EXYNOS5420_GPIO_B45,
+	EXYNOS5420_GPIO_B46,
+	EXYNOS5420_GPIO_B47,
+	EXYNOS5420_GPIO_H00,
+	EXYNOS5420_GPIO_H01,
+	EXYNOS5420_GPIO_H02,
+	EXYNOS5420_GPIO_H03,
+	EXYNOS5420_GPIO_H04,
+	EXYNOS5420_GPIO_H05,
+	EXYNOS5420_GPIO_H06,
+	EXYNOS5420_GPIO_H07,
+
+	EXYNOS5420_GPIO_MAX_PORT_PART_4,
+	EXYNOS5420_GPIO_Z0 = EXYNOS5420_GPIO_MAX_PORT_PART_4,
 	EXYNOS5420_GPIO_Z1,
 	EXYNOS5420_GPIO_Z2,
 	EXYNOS5420_GPIO_Z3,
 	EXYNOS5420_GPIO_Z4,
 	EXYNOS5420_GPIO_Z5,
 	EXYNOS5420_GPIO_Z6,
+
 	EXYNOS5420_GPIO_MAX_PORT
 };
 

@@ -1366,14 +1359,13 @@ static struct gpio_info

exynos5_gpio_data[EXYNOS5_GPIO_NUM_PARTS] =
{ { EXYNOS5_GPIO_PART8_BASE, EXYNOS5_GPIO_MAX_PORT }, };

arch/arm/include/asm/arch-exynos/gpio.h +1 -1

-#define EXYNOS5420_GPIO_NUM_PARTS	6
+#define EXYNOS5420_GPIO_NUM_PARTS	5
 static struct gpio_info

exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] =
{ { EXYNOS5420_GPIO_PART1_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_1 }, { EXYNOS5420_GPIO_PART2_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_2 }, { EXYNOS5420_GPIO_PART3_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_3 }, { EXYNOS5420_GPIO_PART4_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_4 },

(quoted diff) +0 -1

-	{ EXYNOS5420_GPIO_PART5_BASE,

EXYNOS5420_GPIO_MAX_PORT_PART_5 },

arch/arm/include/asm/arch-exynos/gpio.h +6 -6

-	{ EXYNOS5420_GPIO_PART6_BASE, EXYNOS5420_GPIO_MAX_PORT },
+	{ EXYNOS5420_GPIO_PART5_BASE, EXYNOS5420_GPIO_MAX_PORT },
 };
 
 static inline struct gpio_info *get_gpio_data(void)

@@ -1486,17 +1478,17 @@ static const struct gpio_name_num_table
 exynos5_gpio_table[] = { };
 
 static const struct gpio_name_num_table exynos5420_gpio_table[] = {
-	GPIO_ENTRY('a', EXYNOS5420_GPIO_A00, EXYNOS5420_GPIO_B00, 0),
-	GPIO_ENTRY('b', EXYNOS5420_GPIO_B00, EXYNOS5420_GPIO_H00, 0),
-	GPIO_ENTRY('h', EXYNOS5420_GPIO_H00, EXYNOS5420_GPIO_Y70, 0),
 	GPIO_ENTRY('x', EXYNOS5420_GPIO_X00, EXYNOS5420_GPIO_C00, 0),
 	GPIO_ENTRY('c', EXYNOS5420_GPIO_C00, EXYNOS5420_GPIO_D10, 0),
-	GPIO_ENTRY('d', EXYNOS5420_GPIO_D10, EXYNOS5420_GPIO_Y00,
 010),
+	GPIO_ENTRY('d', EXYNOS5420_GPIO_D10, EXYNOS5420_GPIO_Y00, 0),
 	GPIO_ENTRY('y', EXYNOS5420_GPIO_Y00, EXYNOS5420_GPIO_E00, 0),
 	GPIO_ENTRY('e', EXYNOS5420_GPIO_E00, EXYNOS5420_GPIO_F00, 0),
 	GPIO_ENTRY('f', EXYNOS5420_GPIO_F00, EXYNOS5420_GPIO_G00, 0),
 	GPIO_ENTRY('g', EXYNOS5420_GPIO_G00, EXYNOS5420_GPIO_J40, 0),
-	GPIO_ENTRY('j', EXYNOS5420_GPIO_J40, EXYNOS5420_GPIO_Z0,
 040),
+	GPIO_ENTRY('j', EXYNOS5420_GPIO_J40, EXYNOS5420_GPIO_A00, 0),
+	GPIO_ENTRY('a', EXYNOS5420_GPIO_A00, EXYNOS5420_GPIO_B00, 0),
+	GPIO_ENTRY('b', EXYNOS5420_GPIO_B00, EXYNOS5420_GPIO_H00, 0),
+	GPIO_ENTRY('h', EXYNOS5420_GPIO_H00, EXYNOS5420_GPIO_Z0, 0),
 	GPIO_ENTRY('z', EXYNOS5420_GPIO_Z0,

EXYNOS5420_GPIO_MAX_PORT, 0), { 0 }
};

This patch adds support for Odroid-XU3.

Signed-off-by Hyungwon Hwang <[email protected]>

Cc Minkyu Kang <[email protected]>

Cc Lukasz Majewski <[email protected]>

---
Changes for v3:
- Remove unnecessary node from DT file
- Remove unnecessary features from config file
- Remove unnecessary macros from board-specific header file
- Fix some trivial typos in comments

 arch/arm/cpu/armv7/exynos/Kconfig     |   4 ++
 arch/arm/dts/Makefile                 |   3 +-
 arch/arm/dts/exynos5422-odroidxu3.dts |  58 +++++++++++++++
 board/samsung/odroid-xu3/Kconfig      |  12 ++++
 board/samsung/odroid-xu3/MAINTAINERS  |   6 ++
 board/samsung/odroid-xu3/Makefile     |   7 ++
 board/samsung/odroid-xu3/odroid-xu3.c | 131
++++++++++++++++++++++++++++++++++
board/samsung/odroid-xu3/setup.h      |  95 ++++++++++++++++++++++++
configs/odroid-xu3_defconfig          |   4 ++
include/configs/odroid_xu3.h          |  74 +++++++++++++++++++ 10

files changed, 393 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 board/samsung/odroid-xu3/Kconfig create mode 100644 board/samsung/odroid-xu3/MAINTAINERS create mode 100644 board/samsung/odroid-xu3/Makefile create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c create mode 100644 board/samsung/odroid-xu3/setup.h create mode 100644 configs/odroid-xu3_defconfig create mode 100644 include/configs/odroid_xu3.h

(quoted diff) +0 -0

b/arch/arm/cpu/armv7/exynos/Kconfig index 3a25fee..a47cb34 100644

arch/arm/cpu/armv7/exynos/Kconfig +4 -0

@@ -22,6 +22,9 @@ config TARGET_TRATS2
 config TARGET_ODROID
 	bool "Exynos4412 Odroid board"
 
+config TARGET_ODROID_XU3
+	bool "Exynos5422 Odroid board"
+
 config TARGET_ARNDALE
 	bool "Exynos5250 Arndale board"
 	select OF_CONTROL if !SPL_BUILD

@@ -60,6 +63,7 @@ source "board/samsung/universal_c210/Kconfig"
 source "board/samsung/origen/Kconfig"
 source "board/samsung/trats2/Kconfig"
 source "board/samsung/odroid/Kconfig"
+source "board/samsung/odroid-xu3/Kconfig"
 source "board/samsung/arndale/Kconfig"
 source "board/samsung/smdk5250/Kconfig"
 source "board/samsung/smdk5420/Kconfig"

arch/arm/dts/Makefile +2 -1

index 2dcfcc0..66191f9 100644
@@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5420-peach-pit.dtb \
-	exynos5800-peach-pi.dtb
+	exynos5800-peach-pi.dtb \
+	exynos5422-odroidxu3.dtb
 dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \

(quoted diff) +0 -0

b/arch/arm/dts/exynos5422-odroidxu3.dts new file mode 100644 index 0000000..2cca27b

arch/arm/dts/exynos5422-odroidxu3.dts new file +58 -0

@@ -0,0 +1,58 @@
+/*
+ * Odroid XU3 device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "exynos54xx.dtsi"
+
+/ {
+	model = "Odroid XU3 based on EXYNOS5422";
+	compatible = "samsung,odroidxu3", "samsung,exynos5";
+
+	aliases {
+		serial0 = "/serial at 12C00000";
+		console = "/serial at 12C20000";
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000
+			0x80000000 0x10000000
+			0x90000000 0x10000000
+			0xa0000000 0x10000000
+			0xb0000000 0xea00000>;
+	};
+
+	serial at 12C20000 {
+		status="okay";
+	};
+
+	mmc at 12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+		samsung,pre-init;
+	};
+
+	mmc at 12210000 {
+		status = "disabled";
+	};
+
+	mmc at 12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc at 12230000 {
+		status = "disabled";
+	};
+};

(quoted diff) +0 -0

b/board/samsung/odroid-xu3/Kconfig new file mode 100644 index 0000000..6159692

board/samsung/odroid-xu3/Kconfig new file +12 -0

@@ -0,0 +1,12 @@
+if TARGET_ODROID_XU3
+
+config SYS_BOARD
+	default "odroid-xu3"
+
+config SYS_VENDOR
+	default "samsung"
+
+config SYS_CONFIG_NAME
+	default "odroid_xu3"
+
+endif

(quoted diff) +0 -0

b/board/samsung/odroid-xu3/MAINTAINERS new file mode 100644 index 0000000..50cf928

board/samsung/odroid-xu3/MAINTAINERS new file +6 -0

@@ -0,0 +1,6 @@
+ODROID-XU3 BOARD
+M:	Hyungwon Hwang <[email protected]>
+S:	Maintained
+F:	board/samsung/odroid-xu3/
+F:	include/configs/odroid_xu3.h
+F:	configs/odroid-xu3_defconfig

(quoted diff) +0 -0

b/board/samsung/odroid-xu3/Makefile new file mode 100644 index 0000000..85ae5c5

board/samsung/odroid-xu3/Makefile new file +2 -0

@@ -0,0 +1,7 @@
+#
+# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights

reserved. +#

board/samsung/odroid-xu3/Makefile new file +4 -0

+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= odroid-xu3.o

(quoted diff) +0 -0

b/board/samsung/odroid-xu3/odroid-xu3.c new file mode 100644 index 0000000..ea39487

board/samsung/odroid-xu3/odroid-xu3.c new file +37 -0

@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Hyungwon Hwang <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <netdev.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/power.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sromc.h>
+#include "setup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int get_board_rev(void)
+{
+	unsigned int rev = 0;
+	return rev;
+}
+
+int exynos_init(void)
+{
+	return 0;
+}
+
+static int board_clock_init(void)
+{
+	unsigned int set, clr, clr_src_cpu, clr_pll_con0;
+	struct exynos5420_clock *clk = (struct exynos5420_clock *)
+

samsung_get_base_clock();

board/samsung/odroid-xu3/odroid-xu3.c new file +55 -0

+	/*
+	 * CMU_CPU clocks src to MPLL
+	 * Bit values:                 0  ; 1
+	 * MUX_APLL_SEL:        FIN_PLL   ; FOUT_APLL
+	 * MUX_CORE_SEL:        MOUT_APLL ; SCLK_MPLL
+	 * MUX_HPM_SEL:         MOUT_APLL ; SCLK_MPLL_USER_C
+	 * MUX_MPLL_USER_SEL_C: FIN_PLL   ; SCLK_MPLL
+	*/
+
+	/* Set CMU_CPU clocks src to OSCCLK */
+	clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1);
+	set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1);
+
+	clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
+
+	while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
+		continue;
+
+	/* Set APLL to 1200MHz */
+	clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) |
+			PLL_ENABLE(1);
+	set = SDIV(0) | PDIV(2) | MDIV(100) | PLL_ENABLE(1);
+
+	clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
+
+	while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))
+		continue;
+
+	/* Set CMU_CPU clocks src to APLL */
+	set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0);
+	clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
+
+	while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))
+		continue;
+
+	clr = ARM_RATIO(7) | CPUD_RATIO(7) | ATB_RATIO(7) |
+	      PCLK_DBG_RATIO(7) | APLL_RATIO(7) | ARM2_RATIO(7);
+	set = ARM_RATIO(0) | CPUD_RATIO(2) | ATB_RATIO(5) |
+	      PCLK_DBG_RATIO(5) | APLL_RATIO(0) | ARM2_RATIO(0);
+
+	clrsetbits_le32(&clk->div_cpu0, clr, set);
+
+	while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)
+		continue;
+
+	/* Set MPLL to 800MHz */
+	set = SDIV(1) | PDIV(3) | MDIV(200) | PLL_ENABLE(1);
+
+	clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
+
+	while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))
+		continue;
+
+	/* Set CLKMUX_UART src to MPLL */
+	clr = UART0_SEL(7) | UART1_SEL(7) | UART2_SEL(7) |

UART3_SEL(7);

board/samsung/odroid-xu3/odroid-xu3.c new file +1 -0

+	set = UART0_SEL(3) | UART1_SEL(3) | UART2_SEL(3) |

UART3_SEL(3); +

board/samsung/odroid-xu3/odroid-xu3.c new file +11 -0

+	clrsetbits_le32(&clk->src_peric0, clr, set);
+
+	/* Set SCLK_UART to 400 MHz (MPLL / 2) */
+	clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |
+	      UART3_RATIO(15);
+	set = UART0_RATIO(1) | UART1_RATIO(1) | UART2_RATIO(1) |
+	      UART3_RATIO(1);
+
+	clrsetbits_le32(&clk->div_peric0, clr, set);
+
+	while (readl(&clk->div_stat_peric0) &

DIV_STAT_PERIC0_CHANGING)

board/samsung/odroid-xu3/odroid-xu3.c new file +9 -0

+		continue;
+
+	/* Set CLKMUX_MMC src to MPLL */
+	clr = MUX_MMC0_SEL(7) | MUX_MMC1_SEL(7) | MUX_MMC2_SEL(7);
+	set = MUX_MMC0_SEL(3) | MUX_MMC1_SEL(3) | MUX_MMC2_SEL(3);
+
+	clrsetbits_le32(&clk->src_fsys, clr, set);
+
+	clr = MMC0_RATIO(0x3ff) | MMC1_RATIO(0x3ff) |

MMC2_RATIO(0x3ff);

board/samsung/odroid-xu3/odroid-xu3.c new file +17 -0

+	set = MMC0_RATIO(0) | MMC1_RATIO(0) | MMC2_RATIO(0);
+
+	clrsetbits_le32(&clk->div_fsys1, clr, set);
+
+	/* Wait for divider ready status */
+	while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING)
+		continue;
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int exynos_early_init_f(void)
+{
+	return board_clock_init();
+}
+#endif

(quoted diff) +0 -0

b/board/samsung/odroid-xu3/setup.h new file mode 100644 index 0000000..143c189

board/samsung/odroid-xu3/setup.h new file +25 -0

@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2014 Samsung Electronics
+ * Hyungwon Hwang <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ODROID_XU3_SETUP__
+#define __ODROID_XU3_SETUP__
+
+#define SDIV(x)                 ((x) & 0x7)
+#define PDIV(x)                 (((x) & 0x3f) << 8)
+#define MDIV(x)                 (((x) & 0x3ff) << 16)
+#define FSEL(x)                 (((x) & 0x1) << 27)
+#define PLL_LOCKED_BIT          (0x1 << 29)
+#define PLL_ENABLE(x)           (((x) & 0x1) << 31)
+
+/* CLK_SRC_CPU */
+#define MUX_APLL_SEL(x)         ((x) & 0x1)
+#define MUX_CORE_SEL(x)         (((x) & 0x1) << 16)
+
+/* CLK_MUX_STAT_CPU */
+#define APLL_SEL(x)             ((x) & 0x7)
+#define CORE_SEL(x)             (((x) & 0x7) << 16)
+#define MUX_STAT_CPU_CHANGING(x)	!(((x) & APLL_SEL(0))

|| \

board/samsung/odroid-xu3/setup.h new file +1 -0

+					   (x) & APLL_SEL(1)

|| \

board/samsung/odroid-xu3/setup.h new file +1 -0

+					   (x) & CORE_SEL(0)

|| \

board/samsung/odroid-xu3/setup.h new file +64 -0

+					   (x) & CORE_SEL(1))
+
+/* CLK_DIV_CPU0 */
+#define ARM_RATIO(x)           ((x) & 0x7)
+#define CPUD_RATIO(x)         (((x) & 0x7) << 4)
+#define ATB_RATIO(x)         (((x) & 0x7) << 16)
+#define PCLK_DBG_RATIO(x)       (((x) & 0x7) << 20)
+#define APLL_RATIO(x)           (((x) & 0x7) << 24)
+#define ARM2_RATIO(x)         (((x) & 0x7) << 28)
+
+/* CLK_DIV_STAT_CPU0 */
+#define DIV_CPUD(x)           (((x) & 0x1) << 4)
+#define DIV_ATB(x)              (((x) & 0x1) << 16)
+#define DIV_PCLK_DBG(x)         (((x) & 0x1) << 20)
+#define DIV_APLL(x)             (((x) & 0x1) << 24)
+#define DIV_ARM2(x)            (((x) & 0x1) << 28)
+
+#define DIV_STAT_CHANGING	0x1
+#define DIV_STAT_CPU0_CHANGING  (DIV_CPUD(DIV_STAT_CHANGING) | \
+				 DIV_ATB(DIV_STAT_CHANGING) | \
+				 DIV_PCLK_DBG(DIV_STAT_CHANGING) | \
+				 DIV_APLL(DIV_STAT_CHANGING) | \
+				 DIV_ARM2(DIV_STAT_CHANGING))
+
+/* Set CLK_SRC_PERIC0 */
+#define UART0_SEL(x)		(((x) & 0xf) << 4)
+#define UART1_SEL(x)		(((x) & 0xf) << 8)
+#define UART2_SEL(x)		(((x) & 0xf) << 12)
+#define UART3_SEL(x)		(((x) & 0xf) << 16)
+
+/* Set CLK_DIV_PERIC0 */
+#define UART0_RATIO(x)		(((x) & 0xf) << 8)
+#define UART1_RATIO(x)		(((x) & 0xf) << 12)
+#define UART2_RATIO(x)		(((x) & 0xf) << 16)
+#define UART3_RATIO(x)		(((x) & 0xf) << 20)
+
+/* Set CLK_DIV_STAT_PERIC0 */
+#define DIV_UART0(x)		((x) & 0x1)
+#define DIV_UART1(x)		(((x) & 0x1) << 4)
+#define DIV_UART2(x)		(((x) & 0x1) << 8)
+#define DIV_UART3(x)		(((x) & 0x1) << 12)
+#define DIV_UART4(x)		(((x) & 0x1) << 16)
+
+#define DIV_STAT_PERIC0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \
+				  DIV_UART3(DIV_STAT_CHANGING) | \
+				  DIV_UART2(DIV_STAT_CHANGING) | \
+				  DIV_UART1(DIV_STAT_CHANGING) | \
+				  DIV_UART0(DIV_STAT_CHANGING))
+
+/* CLK_SRC_FSYS */
+#define MUX_MMC0_SEL(x)		(((x) & 0x7) << 8)
+#define MUX_MMC1_SEL(x)		(((x) & 0x7) << 12)
+#define MUX_MMC2_SEL(x)		(((x) & 0x7) << 16)
+
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO(x)		((x) & 0x3ff)
+#define MMC1_RATIO(x)		(((x) & 0x3ff) << 10)
+#define MMC2_RATIO(x)		(((x) & 0x3ff) << 20)
+
+#define DIV_MMC0(x)		(((x) & 1) << 20)
+#define DIV_MMC1(x)		(((x) & 1) << 24)
+#define DIV_MMC2(x)		(((x) & 1) << 28)
+
+#define DIV_STAT_FSYS1_CHANGING	(DIV_MMC0(DIV_STAT_CHANGING)

| \

board/samsung/odroid-xu3/setup.h new file +4 -0

+				 DIV_MMC1(DIV_STAT_CHANGING) | \
+				 DIV_MMC2(DIV_STAT_CHANGING))
+
+#endif

(quoted diff) +0 -0

b/configs/odroid-xu3_defconfig new file mode 100644 index 0000000..74aa0cf

configs/odroid-xu3_defconfig new file +4 -0

@@ -0,0 +1,4 @@
+CONFIG_ARM=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_TARGET_ODROID_XU3=y
+CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3"

(quoted diff) +0 -0

b/include/configs/odroid_xu3.h new file mode 100644 index 0000000..4fde4f3

include/configs/odroid_xu3.h new file +7 -0

@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2013 Samsung Electronics
+ * Hyungwon Hwang <[email protected]>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+

include/configs/odroid_xu3.h new file +4 -0

+#define CONFIG_CMD_FAT
+
+/*
+ * FIXME: The number of bank is actually 8. But there is no way to

reserver the
+ * last 16 Mib in the last bank now. So I just excluded the last bank
+ * temporally.
+ */

include/configs/odroid_xu3.h new file +2 -0

+#define CONFIG_NR_DRAM_BANKS	7
+#define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256

MB */ +

include/configs/odroid_xu3.h new file +3 -0

+#define CONFIG_ENV_IS_IN_MMC
+
+#define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR -

0x1000000) +

include/configs/odroid_xu3.h new file +18 -0

+/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */
+#undef CONFIG_EXYNOS_TMU
+#undef CONFIG_TMU_CMD_DTT
+
+#undef CONFIG_EXYNOS_SPL
+#undef CONFIG_SILENT_CONSOLE
+#undef CONFIG_CROS_EC
+#undef CONFIG_CROS_EC_SPI
+#undef CONFIG_CROS_EC_I2C
+#undef CONFIG_CROS_EC_KEYB
+#undef CONFIG_CMD_CROS_EC
+#undef CONFIG_KEYBOARD
+#undef CONFIG_SPI_BOOTING
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#undef CONFIG_SPI_FLASH
+#undef CONFIG_EXYNOS_SPI
+#undef CONFIG_CMD_SF
+#undef CONFIG_CMD_SPI

include/configs/odroid_xu3.h new file +3 -0

+
+
+#endif	/* __CONFIG_H */

Quoted 18 lines

include/configs/odroid_xu3.h new file +18 -0

+#undef CONFIG_EXYNOS_SPL
+#undef CONFIG_SILENT_CONSOLE
+#undef CONFIG_CROS_EC
+#undef CONFIG_CROS_EC_SPI
+#undef CONFIG_CROS_EC_I2C
+#undef CONFIG_CROS_EC_KEYB
+#undef CONFIG_CMD_CROS_EC
+#undef CONFIG_KEYBOARD
+#undef CONFIG_SPI_BOOTING
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#undef CONFIG_SPI_FLASH
+#undef CONFIG_EXYNOS_SPI
+#undef CONFIG_CMD_SF
+#undef CONFIG_CMD_SPI
+#undef CONFIG_SPI_FLASH_WINBOND
+#undef CONFIG_SPI_FLASH_GIGADEVICE
+#undef CONFIG_OF_SPI
+#undef CONFIG_FIT_BEST_MATCH

include/configs/odroid_xu3.h line 71

Quoted 6 lines

include/configs/odroid_xu3.h new file +6 -0

+#undef CONFIG_USB_BOOTING
+#undef CONFIG_CMD_NET
+#undef CONFIG_SMC911X
+#undef CONFIG_CMD_PXE
+#undef CONFIG_MENU
+#undef CONFIG_ENV_IS_IN_SPI_FLASH

Cannot we just remove those CONFIG_* , instead of using #undef?

Dear Lukasz Majewski,

Quoted 18 lines · On Wed, 05 Nov 2014 11:29:53 +0100 Lukasz Majewski <[email protected]>…

Quoted 18 lines

include/configs/odroid_xu3.h new file +18 -0

+#undef CONFIG_EXYNOS_SPL
+#undef CONFIG_SILENT_CONSOLE
+#undef CONFIG_CROS_EC
+#undef CONFIG_CROS_EC_SPI
+#undef CONFIG_CROS_EC_I2C
+#undef CONFIG_CROS_EC_KEYB
+#undef CONFIG_CMD_CROS_EC
+#undef CONFIG_KEYBOARD
+#undef CONFIG_SPI_BOOTING
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#undef CONFIG_SPI_FLASH
+#undef CONFIG_EXYNOS_SPI
+#undef CONFIG_CMD_SF
+#undef CONFIG_CMD_SPI
+#undef CONFIG_SPI_FLASH_WINBOND
+#undef CONFIG_SPI_FLASH_GIGADEVICE
+#undef CONFIG_OF_SPI
+#undef CONFIG_FIT_BEST_MATCH

Quoted 9 lines

include/configs/odroid_xu3.h line 71

Quoted 6 lines

include/configs/odroid_xu3.h new file +6 -0

+#undef CONFIG_USB_BOOTING
+#undef CONFIG_CMD_NET
+#undef CONFIG_SMC911X
+#undef CONFIG_CMD_PXE
+#undef CONFIG_MENU
+#undef CONFIG_ENV_IS_IN_SPI_FLASH

Cannot we just remove those CONFIG_* , instead of using #undef?

We can remove all of them without harm or at least no error in operation except for CONFIG_CMD_NET. Some boards including chromebook uses common config file with Odroid XU3. I don't know whether they need ethernet driver for their work or not. I have no device. Will it be good to remove the config from exynos5-common.h and add them to the config file which inherit exynos5-common.h?

Best regards,
Hyungwon Hwang

This is v3 of the patchset adding support Odroud XU3 board.

link to the previous version:
https://www.mail-archive.com/u-boot at lists.denx.de/msg152275.html

This patchset fixes GPIO information of Exynos5420 which is needed to support Exynos5422 Odroid XU3 board. On the base of the fixes, this patchset adds support for Exynos5422 Odroid XU3 board. I have done this work on the patchset submitted by Akshay Saraswat.

link https://patchwork.ozlabs.org/patch/400043/

Changes for v2:
- Add a patch to add new common setup header file for Odroid
X2/U3 and Odroid XU3
Changes for v3:
- Remove the patch which adds new common setup header file
from v2
- Remove the wrong patch to fix GPIO information of Exynos
5800
- Remove unnecessary node from DT file
- Remove unnecessary features from config file
- Fix some trivial typos in comments

Hyungwon Hwang (2):
exynos5: fix GPIO information of exynos5420
Odroid-XU3: Add support for Odroid-XU3

 arch/arm/cpu/armv7/exynos/Kconfig       |   4 +
 arch/arm/dts/Makefile                   |   3 +-
 arch/arm/dts/exynos5422-odroidxu3.dts   |  58 ++++++++
 arch/arm/include/asm/arch-exynos/cpu.h  |  11 +-
 arch/arm/include/asm/arch-exynos/gpio.h | 232
+++++++++++++++-----------------
board/samsung/odroid-xu3/Kconfig        |  12 ++
board/samsung/odroid-xu3/MAINTAINERS    |   6 +
board/samsung/odroid-xu3/Makefile       |   7 +
board/samsung/odroid-xu3/odroid-xu3.c   | 131 ++++++++++++++++++
board/samsung/odroid-xu3/setup.h        |  95 +++++++++++++
configs/odroid-xu3_defconfig            |   4 +
include/configs/odroid_xu3.h            |  74 ++++++++++ 12 files

changed, 510 insertions(+), 127 deletions(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 board/samsung/odroid-xu3/Kconfig create mode 100644 board/samsung/odroid-xu3/MAINTAINERS create mode 100644 board/samsung/odroid-xu3/Makefile create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c create mode 100644 board/samsung/odroid-xu3/setup.h create mode 100644 configs/odroid-xu3_defconfig create mode 100644 include/configs/odroid_xu3.h