kbuild, kconfig: sync with Linux 3.18-rc1

index 6689364..ab5980f 100644
@@ -20,21 +20,12 @@
 # Will compile qconf as a C++ program, and menu as a C program.
 # They are linked as C++ code to the executable qconf
 
-# hostprogs-y := conf
-# conf-objs  := conf.o libkconfig.so
-# libkconfig-objs := expr.o type.o
-# Will create a shared library named libkconfig.so that consists of
-# expr.o and type.o (they are both compiled as C code and the object files
-# are made as position independent code).
-# conf.c is compiled as a C program, and conf.o is linked together with
-# libkconfig.so as the executable conf.
-# Note: Shared libraries consisting of C++ files are not supported
-
 __hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
 
 # C code
 # Executables compiled from a single .c file
-host-csingle	:= $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
+host-csingle	:= $(foreach m,$(__hostprogs), \
+			$(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
 
 # C executables linked based on several .o files
 host-cmulti	:= $(foreach m,$(__hostprogs),\

@@ -44,33 +35,17 @@ host-cmulti	:= $(foreach m,$(__hostprogs),\
 host-cobjs	:= $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
 
 # C++ code
-# C++ executables compiled from at least on .cc file
+# C++ executables compiled from at least one .cc file
 # and zero or more .c files
 host-cxxmulti	:= $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
 
 # C++ Object (.o) files compiled from .cc files
 host-cxxobjs	:= $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
 
-# Shared libaries (only .c supported)
-# Shared libraries (.so) - all .so files referenced in "xxx-objs"
-host-cshlib	:= $(sort $(filter %.so, $(host-cobjs)))
-# Remove .so files from "xxx-objs"
-host-cobjs	:= $(filter-out %.so,$(host-cobjs))
-
-#Object (.o) files used by the shared libaries
-host-cshobjs	:= $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
-
 # output directory for programs/.o files
-# hostprogs-y := tools/build may have been specified. Retrieve directory
-host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
-# directory of .o files from prog-objs notation
-host-objdirs += $(foreach f,$(host-cmulti),                  \
-                    $(foreach m,$($(f)-objs),                \
-                        $(if $(dir $(m)),$(dir $(m)))))
-# directory of .o files from prog-cxxobjs notation
-host-objdirs += $(foreach f,$(host-cxxmulti),                  \
-                    $(foreach m,$($(f)-cxxobjs),                \
-                        $(if $(dir $(m)),$(dir $(m)))))
+# hostprogs-y := tools/build may have been specified.
+# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation
+host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs))
 
 host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
 

@@ -81,8 +56,6 @@ host-cmulti	:= $(addprefix $(obj)/,$(host-cmulti))
 host-cobjs	:= $(addprefix $(obj)/,$(host-cobjs))
 host-cxxmulti	:= $(addprefix $(obj)/,$(host-cxxmulti))
 host-cxxobjs	:= $(addprefix $(obj)/,$(host-cxxobjs))
-host-cshlib	:= $(addprefix $(obj)/,$(host-cshlib))
-host-cshobjs	:= $(addprefix $(obj)/,$(host-cshobjs))
 host-objdirs    := $(addprefix $(obj)/,$(host-objdirs))
 
 obj-dirs += $(host-objdirs)

@@ -123,7 +96,7 @@ quiet_cmd_host-cmulti	= HOSTLD  $@
       cmd_host-cmulti	= $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
 			  $(addprefix $(obj)/,$($(@F)-objs)) \
 			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE
+$(host-cmulti): $(obj)/%: $(host-cobjs) FORCE
 	$(call if_changed,host-cmulti)
 
 # Create .o file from a single .c file

@@ -140,7 +113,7 @@ quiet_cmd_host-cxxmulti	= HOSTLD  $@
 			  $(foreach o,objs cxxobjs,\
 			  $(addprefix $(obj)/,$($(@F)-$(o)))) \
 			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
+$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) FORCE
 	$(call if_changed,host-cxxmulti)
 
 # Create .o file from a single .cc (C++) file

@@ -149,21 +122,5 @@ quiet_cmd_host-cxxobjs	= HOSTCXX $@
 $(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
 	$(call if_changed_dep,host-cxxobjs)
 
-# Compile .c file, create position independent .o file
-# host-cshobjs -> .o
-quiet_cmd_host-cshobjs	= HOSTCC  -fPIC $@
-      cmd_host-cshobjs	= $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
-$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
-	$(call if_changed_dep,host-cshobjs)
-
-# Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cshlib)
-quiet_cmd_host-cshlib	= HOSTLLD -shared $@
-      cmd_host-cshlib	= $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
-			  $(addprefix $(obj)/,$($(@F:.so=-objs))) \
-			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
-	$(call if_changed,host-cshlib)
-
 targets += $(host-csingle)  $(host-cmulti) $(host-cobjs)\
-	   $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
+	   $(host-cxxmulti) $(host-cxxobjs)

index 6742ddd..3e12b57 100644
@@ -400,16 +400,14 @@ cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalys
 quiet_cmd_link_multi-m = LD [M]  $@
 cmd_link_multi-m = $(cmd_link_multi-y)
 
-# We would rather have a list of rules like
-# 	foo.o: $(foo-objs)
-# but that's not so easy, so we rather make all composite objects depend
-# on the set of all their parts
-$(multi-used-y) : %.o: $(multi-objs-y) FORCE
+$(multi-used-y): FORCE
 	$(call if_changed,link_multi-y)
+$(call multi_depend, $(multi-used-y), .o, -objs -y)
 
-$(multi-used-m) : %.o: $(multi-objs-m) FORCE
+$(multi-used-m): FORCE
 	$(call if_changed,link_multi-m)
 	@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
+$(call multi_depend, $(multi-used-m), .o, -objs -y)
 
 targets += $(multi-used-y) $(multi-used-m)
 

index ab5980f..133edfa 100644
@@ -96,8 +96,9 @@ quiet_cmd_host-cmulti	= HOSTLD  $@
       cmd_host-cmulti	= $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
 			  $(addprefix $(obj)/,$($(@F)-objs)) \
 			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cmulti): $(obj)/%: $(host-cobjs) FORCE
+$(host-cmulti): FORCE
 	$(call if_changed,host-cmulti)
+$(call multi_depend, $(host-cmulti), , -objs)
 
 # Create .o file from a single .c file
 # host-cobjs -> .o

@@ -113,8 +114,9 @@ quiet_cmd_host-cxxmulti	= HOSTLD  $@
 			  $(foreach o,objs cxxobjs,\
 			  $(addprefix $(obj)/,$($(@F)-$(o)))) \
 			  $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) FORCE
+$(host-cxxmulti): FORCE
 	$(call if_changed,host-cxxmulti)
+$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
 
 # Create .o file from a single .cc (C++) file
 quiet_cmd_host-cxxobjs	= HOSTCXX $@

index 072abaa..9d1383a 100644
@@ -160,6 +160,15 @@ dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
 modname-multi = $(sort $(foreach m,$(multi-used),\
 		$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
 
+# Useful for describing the dependency of composite objects
+# Usage:
+#   $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+	$(eval $(obj)/$m: \
+	$(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
 ifdef REGENERATE_PARSERS
 
 # GPERF

index 9c4d241..e7bf38e 100644
@@ -157,39 +157,10 @@ qconf-cxxobjs	:= qconf.o
 qconf-objs	:= zconf.tab.o
 gconf-objs	:= gconf.o zconf.tab.o
 
-hostprogs-y := conf
-
-ifeq ($(MAKECMDGOALS),nconfig)
-	hostprogs-y += nconf
-endif
-
-ifeq ($(MAKECMDGOALS),menuconfig)
-	hostprogs-y += mconf
-endif
-
-ifeq ($(MAKECMDGOALS),update-po-config)
-	hostprogs-y += kxgettext
-endif
-
-ifeq ($(MAKECMDGOALS),xconfig)
-	qconf-target := 1
-endif
-ifeq ($(MAKECMDGOALS),gconfig)
-	gconf-target := 1
-endif
-
-
-ifeq ($(qconf-target),1)
-	hostprogs-y += qconf
-endif
-
-ifeq ($(gconf-target),1)
-	hostprogs-y += gconf
-endif
+hostprogs-y := conf nconf mconf kxgettext qconf gconf
 
 clean-files	:= qconf.moc .tmp_qtcheck .tmp_gtkcheck
 clean-files	+= zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
-clean-files     += mconf qconf gconf nconf
 clean-files     += config.pot linux.pot
 
 # Check that we have the required ncurses stuff installed for lxdialog (menuconfig)

@@ -224,7 +195,7 @@ HOSTLOADLIBES_nconf	= $(shell \
 				|| echo "-lmenu -lpanel -lncurses"  )
 $(obj)/qconf.o: $(obj)/.tmp_qtcheck
 
-ifeq ($(qconf-target),1)
+ifeq ($(MAKECMDGOALS),xconfig)
 $(obj)/.tmp_qtcheck: $(src)/Makefile
 -include $(obj)/.tmp_qtcheck
 

@@ -281,7 +252,7 @@ endif
 
 $(obj)/gconf.o: $(obj)/.tmp_gtkcheck
 
-ifeq ($(gconf-target),1)
+ifeq ($(MAKECMDGOALS),gconfig)
 -include $(obj)/.tmp_gtkcheck
 
 # GTK needs some extra effort, too...

index 26dacee..7f25cb5 100644
@@ -1,10 +1,3 @@
-#
-# (C) Copyright 2000-2013
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
 VERSION = 2014
 PATCHLEVEL = 10
 SUBLEVEL =

@@ -17,11 +10,9 @@ NAME =
 # Comments in this file are targeted only to the developer, do not
 # expect to learn how to build the kernel reading this file.
 
-# Do not:
-# o  use make's built-in rules and variables
-#    (this increases performance and avoids hard-to-debug behaviour);
-# o  print "Entering directory ...";
-MAKEFLAGS += -rR --no-print-directory
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -rR
 
 # Avoid funny character set dependencies
 unexport LC_ALL

@@ -29,6 +20,9 @@ LC_COLLATE=C
 LC_NUMERIC=C
 export LC_COLLATE LC_NUMERIC
 
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.
 #

@@ -45,6 +39,29 @@ export LC_COLLATE LC_NUMERIC
 # descending is started. They are now explicitly listed as the
 # prepare rule.
 
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+#	$(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
 # To put more focus on warnings, be less verbose as default
 # Use 'make V=1' to see the full commands
 

@@ -55,33 +72,28 @@ ifndef KBUILD_VERBOSE
   KBUILD_VERBOSE = 0
 endif
 
-# Call a source code checker (by default, "sparse") as part of the
-# C compilation.
-#
-# Use 'make C=1' to enable checking of only re-compiled files.
-# Use 'make C=2' to enable checking of *all* source files, regardless
-# of whether they are re-compiled or not.
-#
-# See the file "Documentation/sparse.txt" for more details, including
-# where to get the "sparse" utility.
+ifeq ($(KBUILD_VERBOSE),1)
+  quiet =
+  Q =
+else
+  quiet=quiet_
+  Q = @
+endif
 
-ifeq ("$(origin C)", "command line")
-  KBUILD_CHECKSRC = $(C)
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+  quiet=silent_
 endif
-ifndef KBUILD_CHECKSRC
-  KBUILD_CHECKSRC = 0
+else					# make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+  quiet=silent_
 endif
-
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
-  KBUILD_EXTMOD ?= $(SUBDIRS)
 endif
 
-ifeq ("$(origin M)", "command line")
-  KBUILD_EXTMOD := $(M)
-endif
+export quiet Q KBUILD_VERBOSE
 
 # kbuild supports saving output files in a separate directory.
 # To locate output files in a separate directory two syntaxes are supported.

@@ -98,7 +110,6 @@ endif
 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
 # variable.
 
-
 # KBUILD_SRC is set on invocation of make in OBJ directory
 # KBUILD_SRC is not intended to be used by the regular user (for now)
 ifeq ($(KBUILD_SRC),)

@@ -131,10 +142,8 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 	@:
 
 sub-make: FORCE
-	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
-	KBUILD_SRC=$(CURDIR) \
-	KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
-	$(filter-out _all sub-make,$(MAKECMDGOALS))
+	$(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+	-f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 
 # Leave processing to above invocation of make
 skip-makefile := 1

@@ -144,6 +153,39 @@ endif # ifeq ($(KBUILD_SRC),)
 # We process the rest of the Makefile if this is the final invocation of make
 ifeq ($(skip-makefile),)
 
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+  KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+  KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+  KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+  KBUILD_EXTMOD := $(M)
+endif
+
 # If building an external module we do not care about the all: rule
 # but instead _all depend on modules
 PHONY += all

@@ -153,8 +195,18 @@ else
 _all: modules
 endif
 
-srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-objtree		:= $(CURDIR)
+ifeq ($(KBUILD_SRC),)
+        # building in the source tree
+        srctree := .
+else
+        ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+                # building in a subdirectory of the source tree
+                srctree := ..
+        else
+                srctree := $(KBUILD_SRC)
+        endif
+endif
+objtree		:= .
 src		:= $(srctree)
 obj		:= $(objtree)
 

@@ -262,52 +314,6 @@ endif
 export KBUILD_MODULES KBUILD_BUILTIN
 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-#         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-#         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed@all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-#	$(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
-  quiet =
-  Q =
-else
-  quiet=quiet_
-  Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
-ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
-  quiet=silent_
-endif
-else					# make-3.8x
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
-  quiet=silent_
-endif
-endif
-
-export quiet Q KBUILD_VERBOSE
-
 # Look for make include files relative to root of kernel src
 MAKEFLAGS += --include-dir=$(srctree)
 

@@ -1314,7 +1320,7 @@ help:
 	@echo  ''
 	@echo  'Other generic targets:'
 	@echo  '  all		  - Build all necessary images depending on configuration'
-	@echo  '  u-boot	  - Build the bare u-boot'
+	@echo  '* u-boot	  - Build the bare u-boot'
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[oisS] - Build specified target only'
 	@echo  '  dir/file.lst    - Build specified mixed source/assembly target only'

@@ -1322,8 +1328,8 @@ help:
 	@echo  '  tags/ctags	  - Generate ctags file for editors'
 	@echo  '  etags		  - Generate etags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
-	@echo  '  ubootrelease	  - Output the release version string'
-	@echo  '  ubootversion	  - Output the version stored in Makefile'
+	@echo  '  ubootrelease	  - Output the release version string (use with make -s)'
+	@echo  '  ubootversion	  - Output the version stored in Makefile (use with make -s)'
 	@echo  ''
 	@echo  'Static analysers'
 	@echo  '  checkstack      - Generate a list of stack hogs'

index ced2b9a..8e9d71f 100644
@@ -89,9 +89,12 @@ PHONY += create_symlink
 create_symlink:
 ifneq ($(KBUILD_SRC),)
 	$(Q)mkdir -p include/asm
+	$(Q)ln -fsn $(KBUILD_SRC)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
+		include/asm/arch
+else
+	$(Q)ln -fsn arch-$(if $(SOC),$(SOC),$(CPU)) \
+		arch/$(ARCH)/include/asm/arch
 endif
-	$(Q)ln -fsn $(srctree)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
-		$(if $(KBUILD_SRC),,arch/$(ARCH)/)include/asm/arch
 
 PHONY += FORCE
 FORCE:

index 3b95964..c422b76 100644
@@ -157,7 +157,7 @@ HOSTCFLAGS_sha256.o := -pedantic
 #HOSTCFLAGS_mpc86x_clk.o := -pedantic
 
 quiet_cmd_wrap = WRAP    $@
-cmd_wrap = echo "\#include <$(srctree)/$(patsubst $(obj)/%,%,$@)>" >$@
+cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
 
 $(obj)/lib/%.c $(obj)/common/%.c:
 	$(call cmd,wrap)

index e7bf38e..349f770 100644
@@ -104,6 +104,23 @@ endif
 %_defconfig: $(obj)/conf
 	$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
 
+configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config)
+
+define mergeconfig
+$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture))
+$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1))
+$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+endef
+
+PHONY += kvmconfig
+kvmconfig:
+	$(call mergeconfig,kvm_guest)
+
+PHONY += tinyconfig
+tinyconfig: allnoconfig
+	$(call mergeconfig,tiny)
+
 # Help text used by make help
 help:
 	@echo  '  config	  - Update current config utilising a line-oriented program'

@@ -124,6 +141,8 @@ help:
 	@echo  '  randconfig	  - New config with random answer to all options'
 	@echo  '  listnewconfig   - List new options'
 	@echo  '  olddefconfig	  - Same as silentoldconfig but sets new symbols to their default value'
+#	@echo  '  kvmconfig	  - Enable additional options for guest kernel support'
+#	@echo  '  tinyconfig	  - Configure the tiniest possible kernel'
 
 # lxdialog stuff
 check-lxdialog  := $(srctree)/$(src)/lxdialog/check-lxdialog.sh

@@ -191,7 +210,8 @@ HOSTCFLAGS_gconf.o	= `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
 HOSTLOADLIBES_mconf   = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
 
 HOSTLOADLIBES_nconf	= $(shell \
-				pkg-config --libs menu panel ncurses 2>/dev/null \
+				pkg-config --libs menuw panelw ncursesw 2>/dev/null \
+				|| pkg-config --libs menu panel ncurses 2>/dev/null \
 				|| echo "-lmenu -lpanel -lncurses"  )
 $(obj)/qconf.o: $(obj)/.tmp_qtcheck
 

index 7f25cb5..603b6b7 100644
@@ -1450,7 +1450,7 @@ endif
 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
 # Usage:
 # $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
 
 endif	# skip-makefile
 

index 4c33359..d20f20a 100644
@@ -177,13 +177,13 @@ ld-ifversion = $(shell [ $(call ld-version) $(1) $(2) ] && echo $(3))
 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
 # Usage:
 # $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+build := -f $(srctree)/scripts/Makefile.build obj
 
 ###
 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
 # Usage:
 # $(Q)$(MAKE) $(modbuiltin)=dir
-modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj
+modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
 
 # Prefix -I with $(srctree) if it is not an absolute path.
 # skip if -I has no parameter

@@ -221,11 +221,13 @@ else
 arg-check = $(if $(strip $(cmd_$@)),,1)
 endif
 
-# >'< substitution is for echo to work,
-# >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...']
-# in $(cmd_xxx) double $$ your perl vars
-make-cmd = $(subst \\,\\\\,$(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))))
+# Replace >$< with >$$< to preserve $ when reloading the .cmd file
+# (needed for make)
+# Replace >#< with >\#< to avoid starting a comment in the .cmd file
+# (needed for make)
+# Replace >'< with >'\''< to be able to enclose the whole string in '...'
+# (needed for the shell)
+make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1)))))
 
 # Find any prerequisites that is newer than target or that does not exist.
 # PHONY targets skipped in both cases.

@@ -236,7 +238,7 @@ any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
 if_changed = $(if $(strip $(any-prereq) $(arg-check)),                       \
 	@set -e;                                                             \
 	$(echo-cmd) $(cmd_$(1));                                             \
-	echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+	printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
 
 # Execute the command and also postprocess generated .d dependencies file.
 if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ),                  \

index 3e12b57..14cf092 100644
@@ -97,11 +97,11 @@ endif
 
 # ===========================================================================
 
-ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
+ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
 lib-target := $(obj)/lib.a
 endif
 
-ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
 builtin-target := $(obj)/built-in.o
 endif
 

index 88f14e2..21e1f21 100644
@@ -10,7 +10,7 @@ __clean:
 # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
 # Usage:
 # $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
 
 # The filename Kbuild has precedence over Makefile
 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))

@@ -23,15 +23,13 @@ __subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
 subdir-y	+= $(__subdir-y)
 __subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
 subdir-m	+= $(__subdir-m)
-__subdir-n	:= $(patsubst %/,%,$(filter %/, $(obj-n)))
-subdir-n	+= $(__subdir-n)
 __subdir-	:= $(patsubst %/,%,$(filter %/, $(obj-)))
 subdir-		+= $(__subdir-)
 
 # Subdirectories we need to descend into
 
 subdir-ym	:= $(sort $(subdir-y) $(subdir-m))
-subdir-ymn      := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
+subdir-ymn      := $(sort $(subdir-ym) $(subdir-))
 
 # Add subdir path
 

index c881b8c..08a6c76 100755
@@ -2073,6 +2073,7 @@ sub check_return_section {
 sub dump_function($$) {
     my $prototype = shift;
     my $file = shift;
+    my $noret = 0;
 
     $prototype =~ s/^static +//;
     $prototype =~ s/^extern +//;

@@ -2084,9 +2085,10 @@ sub dump_function($$) {
     $prototype =~ s/^noinline +//;
     $prototype =~ s/__init +//;
     $prototype =~ s/__init_or_module +//;
+    $prototype =~ s/__meminit +//;
     $prototype =~ s/__must_check +//;
     $prototype =~ s/__weak +//;
-    $prototype =~ s/^#\s*define\s+//; #ak added
+    my $define = $prototype =~ s/^#\s*define\s+//; #ak added
     $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
 
     # Yes, this truly is vile.  We are looking for:

@@ -2105,7 +2107,15 @@ sub dump_function($$) {
     # - atomic_set (macro)
     # - pci_match_device, __copy_to_user (long return type)
 
-    if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
+    if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) {
+        # This is an object-like macro, it has no return type and no parameter
+        # list.
+        # Function-like macros are not allowed to have spaces between
+        # declaration_name and opening parenthesis (notice the \s+).
+        $return_type = $1;
+        $declaration_name = $2;
+        $noret = 1;
+    } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
 	$prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
 	$prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
 	$prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||

@@ -2140,7 +2150,7 @@ sub dump_function($$) {
         # of warnings goes sufficiently down, the check is only performed in
         # verbose mode.
         # TODO: always perform the check.
-        if ($verbose) {
+        if ($verbose && !$noret) {
                 check_return_section($file, $declaration_name, $return_type);
         }
 

old mode 100644
new mode 100755

old mode 100644
new mode 100755

old mode 100644
new mode 100755

old mode 100644
new mode 100755

old mode 100644
new mode 100755

old mode 100644
new mode 100755

old mode 100644
new mode 100755

old mode 100644
new mode 100755