Fixes, cleanups and modernization for NCR5380 drivers

Index: linux/drivers/scsi/NCR5380.h
===================================================================
@@ -296,7 +296,8 @@ struct NCR5380_hostdata {
 #endif
 
 #define dprintk(flg, fmt, ...) \
-	do { if ((NDEBUG) & (flg)) pr_debug(fmt, ## __VA_ARGS__); } while (0)
+	do { if ((NDEBUG) & (flg)) \
+		printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
 
 #if NDEBUG
 #define NCR5380_dprint(flg, arg) \

Index: linux/drivers/scsi/dmx3191d.c
===================================================================
@@ -38,8 +38,8 @@
 #define NCR5380_read(reg)		inb(port + reg)
 #define NCR5380_write(reg, value)	outb(value, port + reg)
 
-#define NCR5380_implementation_fields	unsigned int port
-#define NCR5380_local_declare()		NCR5380_implementation_fields
+#define NCR5380_implementation_fields	/* none */
+#define NCR5380_local_declare()		unsigned int port
 #define NCR5380_setup(instance)		port = instance->io_port
 
 /*

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -93,35 +93,6 @@ static volatile unsigned char *mac_scsi_
  * NCR 5380 register access functions
  */
 
-#if 0
-/* Debug versions */
-#define CTRL(p,v) (*ctrl = (v))
-
-static char macscsi_read(struct Scsi_Host *instance, int reg)
-{
-  int iobase = instance->io_port;
-  int i;
-  int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
-
-  CTRL(iobase, 0);
-  i = in_8(iobase + (reg<<4));
-  CTRL(iobase, 0x40);
-
-  return i;
-}
-
-static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
-{
-  int iobase = instance->io_port;
-  int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
-
-  CTRL(iobase, 0);
-  out_8(iobase + (reg<<4), value);
-  CTRL(iobase, 0x40);
-}
-#else
-
-/* Fast versions */
 static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg)
 {
   return in_8(instance->io_port + (reg<<4));

@@ -131,8 +102,6 @@ static __inline__ void macscsi_write(str
 {
   out_8(instance->io_port + (reg<<4), value);
 }
-#endif
-
 
 /*
  * Function : mac_scsi_setup(char *str)

@@ -279,8 +248,6 @@ int __init macscsi_detect(struct scsi_ho
 
     instance->n_io_port = 255;
 
-    ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
-
     if (instance->irq != SCSI_IRQ_NONE)
 	if (request_irq(instance->irq, NCR5380_intr, 0, "ncr5380", instance)) {
 	    printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",

Index: linux/drivers/scsi/mac_scsi.h
===================================================================
@@ -47,8 +47,7 @@
 
 #include <scsi/scsicam.h>
 
-#define NCR5380_implementation_fields \
-    int port, ctrl
+#define NCR5380_implementation_fields /* none */
 
 #define NCR5380_local_declare() \
         struct Scsi_Host *_instance

Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
@@ -313,8 +313,6 @@ static int __init sun3scsi_detect(struct
 
 	instance->n_io_port = 32;
 
-        ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
-
 	if (request_irq(instance->irq, scsi_sun3_intr,
 			     0, "Sun3SCSI-5380", instance)) {
 #ifndef REAL_DMA

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -78,8 +78,7 @@ static int sun3scsi_release (struct Scsi
 #define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
 #endif
 
-#define NCR5380_implementation_fields \
-    int port, ctrl
+#define NCR5380_implementation_fields /* none */
 
 #define NCR5380_local_declare() \
         struct Scsi_Host *_instance

Index: linux/drivers/scsi/dtc.c
===================================================================
@@ -173,10 +173,13 @@ static const struct signature {
  *
  */
 
-static void __init dtc_setup(char *str, int *ints)
+static int __init dtc_setup(char *str)
 {
 	static int commandline_current = 0;
 	int i;
+	int ints[10];
+
+	get_options(str, ARRAY_SIZE(ints), ints);
 	if (ints[0] != 2)
 		printk("dtc_setup: usage dtc=address,irq\n");
 	else if (commandline_current < NO_OVERRIDES) {

@@ -189,7 +192,10 @@ static void __init dtc_setup(char *str,
 			}
 		++commandline_current;
 	}
+	return 1;
 }
+
+__setup("dtc=", dtc_setup);
 #endif
 
 /* 

Index: linux/drivers/scsi/pas16.c
===================================================================
@@ -337,6 +337,7 @@ static int __init
 }
 
 
+#ifndef MODULE
 /*
  * Function : pas16_setup(char *str, int *ints)
  *

@@ -347,10 +348,13 @@ static int __init
  *
  */
 
-void __init pas16_setup(char *str, int *ints)
+static int __init pas16_setup(char *str)
 {
     static int commandline_current = 0;
     int i;
+    int ints[10];
+
+    get_options(str, ARRAY_SIZE(ints), ints);
     if (ints[0] != 2) 
 	printk("pas16_setup : usage pas16=io_port,irq\n");
     else 

@@ -364,8 +368,12 @@ void __init pas16_setup(char *str, int *
 		}
 	    ++commandline_current;
 	}
+    return 1;
 }
 
+__setup("pas16=", pas16_setup);
+#endif
+
 /* 
  * Function : int pas16_detect(struct scsi_host_template * tpnt)
  *

Index: linux/drivers/scsi/t128.c
===================================================================
@@ -148,6 +148,7 @@ static struct signature {
 
 #define NO_SIGNATURES ARRAY_SIZE(signatures)
 
+#ifndef MODULE
 /*
  * Function : t128_setup(char *str, int *ints)
  *

@@ -158,9 +159,13 @@ static struct signature {
  *
  */
 
-void __init t128_setup(char *str, int *ints){
+static int __init t128_setup(char *str)
+{
     static int commandline_current = 0;
     int i;
+    int ints[10];
+
+    get_options(str, ARRAY_SIZE(ints), ints);
     if (ints[0] != 2) 
 	printk("t128_setup : usage t128=address,irq\n");
     else 

@@ -174,8 +179,12 @@ void __init t128_setup(char *str, int *i
 		}
 	    ++commandline_current;
 	}
+    return 1;
 }
 
+__setup("t128=", t128_setup);
+#endif
+
 /* 
  * Function : int t128_detect(struct scsi_host_template * tpnt)
  *

Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
@@ -272,7 +272,7 @@ static int __init do_DTC3181E_setup(char
  *	Locks: none
  */
 
-int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
+static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 {
 	static int current_override = 0;
 	int count;

@@ -484,7 +484,7 @@ int __init generic_NCR5380_detect(struct
  *	Report driver information for the NCR5380
  */
  	
-const char *generic_NCR5380_info(struct Scsi_Host *host)
+static const char *generic_NCR5380_info(struct Scsi_Host *host)
 {
 	static const char string[] = "Generic NCR5380/53C400 Driver";
 	return string;

@@ -499,7 +499,7 @@ const char *generic_NCR5380_info(struct
  *	Locks: none
  */
  
-int generic_NCR5380_release_resources(struct Scsi_Host *instance)
+static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
 {
 	NCR5380_local_declare();
 	NCR5380_setup(instance);

Index: linux/drivers/scsi/pas16.c
===================================================================
@@ -382,7 +382,7 @@ __setup("pas16=", pas16_setup);
  *
  */
 
-int __init pas16_detect(struct scsi_host_template * tpnt)
+static int __init pas16_detect(struct scsi_host_template *tpnt)
 {
     static int current_override = 0;
     static unsigned short current_base = 0;

@@ -512,8 +512,8 @@ int __init pas16_detect(struct scsi_host
  * and matching the H_C_S coordinates to what DOS uses.
  */
 
-int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev,
-		sector_t capacity, int * ip)
+static int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev,
+                           sector_t capacity, int *ip)
 {
   int size = capacity;
   ip[0] = 64;

Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
@@ -86,8 +86,6 @@ extern int sun3_map_test(unsigned long,
 
 
 static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
-static inline unsigned char sun3scsi_read(int reg);
-static inline void sun3scsi_write(int reg, int value);
 
 static int setup_can_queue = -1;
 module_param(setup_can_queue, int, 0);

@@ -348,7 +346,7 @@ static int __init sun3scsi_detect(struct
 	return 1;
 }
 
-int sun3scsi_release (struct Scsi_Host *shpnt)
+static int sun3scsi_release(struct Scsi_Host *shpnt)
 {
 	if (shpnt->irq != SCSI_IRQ_NONE)
 		free_irq(shpnt->irq, shpnt);

Index: linux/drivers/scsi/t128.c
===================================================================
@@ -193,7 +193,8 @@ __setup("t128=", t128_setup);
  *
  */
 
-int __init t128_detect(struct scsi_host_template * tpnt){
+static int __init t128_detect(struct scsi_host_template *tpnt)
+{
     static int current_override = 0, current_base = 0;
     struct Scsi_Host *instance;
     unsigned long base;

@@ -325,8 +326,8 @@ static int t128_release(struct Scsi_Host
  * and matching the H_C_S coordinates to what DOS uses.
  */
 
-int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
-		sector_t capacity, int * ip)
+static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+                          sector_t capacity, int *ip)
 {
   ip[0] = 64;
   ip[1] = 32;

Index: linux/drivers/scsi/dtc.h
===================================================================
@@ -32,13 +32,6 @@
 #define DTCDEBUG_INIT	0x1
 #define DTCDEBUG_TRANSFER 0x2
 
-static int dtc_abort(Scsi_Cmnd *);
-static int dtc_biosparam(struct scsi_device *, struct block_device *,
-		         sector_t, int*);
-static int dtc_detect(struct scsi_host_template *);
-static int dtc_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int dtc_bus_reset(Scsi_Cmnd *);
-
 #ifndef CMD_PER_LUN
 #define CMD_PER_LUN 2
 #endif

Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
@@ -39,12 +39,6 @@
 #endif
 
 #ifndef ASM
-static int generic_NCR5380_abort(Scsi_Cmnd *);
-static int generic_NCR5380_detect(struct scsi_host_template *);
-static int generic_NCR5380_release_resources(struct Scsi_Host *);
-static int generic_NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int generic_NCR5380_bus_reset(Scsi_Cmnd *);
-static const char* generic_NCR5380_info(struct Scsi_Host *);
 
 #ifndef CMD_PER_LUN
 #define CMD_PER_LUN 2

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -56,8 +56,6 @@
 
 #define RESET_BOOT
 
-extern void via_scsi_clear(void);
-
 #ifdef RESET_BOOT
 static void mac_scsi_reset_boot(struct Scsi_Host *instance);
 #endif

Index: linux/drivers/scsi/pas16.h
===================================================================
@@ -114,12 +114,6 @@
 
 
 #ifndef ASM
-static int pas16_abort(Scsi_Cmnd *);
-static int pas16_biosparam(struct scsi_device *, struct block_device *,
-			   sector_t, int*);
-static int pas16_detect(struct scsi_host_template *);
-static int pas16_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int pas16_bus_reset(Scsi_Cmnd *);
 
 #ifndef CMD_PER_LUN
 #define CMD_PER_LUN 2

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -43,13 +43,6 @@
 
 #define IOBASE_SUN3_VMESCSI 0xff200000
 
-static int sun3scsi_abort(struct scsi_cmnd *);
-static int sun3scsi_detect (struct scsi_host_template *);
-static const char *sun3scsi_info (struct Scsi_Host *);
-static int sun3scsi_bus_reset(struct scsi_cmnd *);
-static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int sun3scsi_release (struct Scsi_Host *);
-
 #ifndef CMD_PER_LUN
 #define CMD_PER_LUN 2
 #endif

Index: linux/drivers/scsi/t128.h
===================================================================
@@ -88,12 +88,6 @@
 #define T_DATA_REG_OFFSET	0x1e00	/* rw 512 bytes long */
 
 #ifndef ASM
-static int t128_abort(struct scsi_cmnd *);
-static int t128_biosparam(struct scsi_device *, struct block_device *,
-			  sector_t, int*);
-static int t128_detect(struct scsi_host_template *);
-static int t128_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int t128_bus_reset(struct scsi_cmnd *);
 
 #ifndef CMD_PER_LUN
 #define CMD_PER_LUN 2

Index: linux/drivers/scsi/atari_scsi.c
===================================================================
@@ -181,12 +181,7 @@ static inline void DISABLE_IRQ(void)
 /***************************** Prototypes *****************************/
 
 #ifdef REAL_DMA
-static int scsi_dma_is_ignored_buserr(unsigned char dma_stat);
 static void atari_scsi_fetch_restbytes(void);
-static long atari_scsi_dma_residual(struct Scsi_Host *instance);
-static int falcon_classify_cmd(Scsi_Cmnd *cmd);
-static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
-					Scsi_Cmnd *cmd, int write_flag);
 #endif
 static irqreturn_t scsi_tt_intr(int irq, void *dummy);
 static irqreturn_t scsi_falcon_intr(int irq, void *dummy);

Index: linux/drivers/scsi/NCR5380.h
===================================================================
@@ -322,14 +322,6 @@ static irqreturn_t NCR5380_intr(int irq,
 #endif
 static void NCR5380_main(struct work_struct *work);
 static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
-static int NCR5380_abort(Scsi_Cmnd * cmd);
-static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
-static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int __maybe_unused NCR5380_show_info(struct seq_file *,
-	struct Scsi_Host *);
-static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
-	char *buffer, int length);
-
 static void NCR5380_reselect(struct Scsi_Host *instance);
 static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
 #if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)

Index: linux/drivers/scsi/dtc.c
===================================================================
@@ -219,10 +219,6 @@ static int __init dtc_detect(struct scsi
 	void __iomem *base;
 	int sig, count;
 
-	tpnt->proc_name = "dtc3x80";
-	tpnt->show_info = dtc_show_info;
-	tpnt->write_info = dtc_write_info;
-
 	for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
 		addr = 0;
 		base = NULL;

@@ -477,6 +473,9 @@ static struct scsi_host_template driver_
 	.name				= "DTC 3180/3280 ",
 	.detect				= dtc_detect,
 	.release			= dtc_release,
+	.proc_name			= "dtc3x80",
+	.show_info			= dtc_show_info,
+	.write_info			= dtc_write_info,
 	.queuecommand			= dtc_queue_command,
 	.eh_abort_handler		= dtc_abort,
 	.eh_bus_reset_handler		= dtc_bus_reset,

Index: linux/drivers/scsi/pas16.c
===================================================================
@@ -390,10 +390,6 @@ static int __init pas16_detect(struct sc
     unsigned short io_port;
     int  count;
 
-    tpnt->proc_name = "pas16";
-    tpnt->show_info = pas16_show_info;
-    tpnt->write_info = pas16_write_info;
-
     if (pas16_addr != 0) {
 	overrides[0].io_port = pas16_addr;
 	/*

@@ -620,6 +616,9 @@ static struct scsi_host_template driver_
 	.name           = "Pro Audio Spectrum-16 SCSI",
 	.detect         = pas16_detect,
 	.release        = pas16_release,
+	.proc_name      = "pas16",
+	.show_info      = pas16_show_info,
+	.write_info     = pas16_write_info,
 	.queuecommand   = pas16_queue_command,
 	.eh_abort_handler = pas16_abort,
 	.eh_bus_reset_handler = pas16_bus_reset,

Index: linux/drivers/scsi/t128.c
===================================================================
@@ -201,10 +201,6 @@ static int __init t128_detect(struct scs
     void __iomem *p;
     int sig, count;
 
-    tpnt->proc_name = "t128";
-    tpnt->show_info = t128_show_info;
-    tpnt->write_info = t128_write_info;
-
     for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
 	base = 0;
 	p = NULL;

@@ -435,6 +431,9 @@ static struct scsi_host_template driver_
 	.name           = "Trantor T128/T128F/T228",
 	.detect         = t128_detect,
 	.release        = t128_release,
+	.proc_name      = "t128",
+	.show_info      = t128_show_info,
+	.write_info     = t128_write_info,
 	.queuecommand   = t128_queue_command,
 	.eh_abort_handler = t128_abort,
 	.eh_bus_reset_handler    = t128_bus_reset,

Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
@@ -772,7 +772,8 @@ static void show_Scsi_Cmnd(Scsi_Cmnd *cm
 	seq_printf(m, "\n");
 }
 
-static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance)
+static int __maybe_unused NCR5380_show_info(struct seq_file *m,
+                                            struct Scsi_Host *instance)
 {
 	struct NCR5380_hostdata *hostdata;
 	Scsi_Cmnd *ptr;

Index: linux/drivers/scsi/sun3_NCR5380.c
===================================================================
@@ -718,7 +718,8 @@ static void show_Scsi_Cmnd(Scsi_Cmnd *cm
 	seq_printf(m, "\n");
 }
 
-static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance)
+static int __maybe_unused NCR5380_show_info(struct seq_file *m,
+                                            struct Scsi_Host *instance)
 {
 	struct NCR5380_hostdata *hostdata;
 	Scsi_Cmnd *ptr;

88 lines not on this page · raw message

Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
@@ -316,10 +316,6 @@ static struct scsi_host_template *the_te
  * important: the tag bit must be cleared before 'nr_allocated' is decreased.
  */
 
-/* -1 for TAG_NONE is not possible with unsigned char cmd->tag */
-#undef TAG_NONE
-#define TAG_NONE 0xff
-
 typedef struct {
 	DECLARE_BITMAP(allocated, MAX_TAGS);
 	int nr_allocated;

@@ -1118,9 +1114,7 @@ static void NCR5380_main(struct work_str
 #ifdef SUPPORT_TAGS
 					cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
 #endif
-					if (!NCR5380_select(instance, tmp,
-					    (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE :
-					    TAG_NEXT)) {
+					if (!NCR5380_select(instance, tmp)) {
 						falcon_dont_release--;
 						/* release if target did not response! */
 						falcon_release_lock_if_possible(hostdata);

@@ -1351,17 +1345,14 @@ static void collect_stats(struct NCR5380
 #endif
 
 /*
- * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd,
- *	int tag);
+ * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd)
  *
  * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
  *	including ARBITRATION, SELECTION, and initial message out for
  *	IDENTIFY and queue messages.
  *
  * Inputs : instance - instantiation of the 5380 driver on which this
- *	target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
- *	new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
- *	the command that is presently connected.
+ *	target lives, cmd - SCSI command to execute.
  *
  * Returns : -1 if selection could not execute for some reason,
  *	0 if selection succeeded or failed because the target

@@ -1381,7 +1372,7 @@ static void collect_stats(struct NCR5380
  *		cmd->result host byte set to DID_BAD_TARGET.
  */
 
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
+static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd)
 {
 	SETUP_HOSTDATA(instance);
 	unsigned char tmp[3], phase;

@@ -2758,7 +2749,7 @@ int NCR5380_abort(Scsi_Cmnd *cmd)
 			local_irq_restore(flags);
 			dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
 
-			if (NCR5380_select(instance, cmd, (int)cmd->tag))
+			if (NCR5380_select(instance, cmd))
 				return FAILED;
 
 			dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);

Index: linux/drivers/scsi/sun3_NCR5380.c
===================================================================
@@ -305,10 +305,6 @@ static struct scsi_host_template *the_te
  * important: the tag bit must be cleared before 'nr_allocated' is decreased.
  */
 
-/* -1 for TAG_NONE is not possible with unsigned char cmd->tag */
-#undef TAG_NONE
-#define TAG_NONE 0xff
-
 /* For the m68k, the number of bits in 'allocated' must be a multiple of 32! */
 #if (MAX_TAGS % 32) != 0
 #error "MAX_TAGS must be a multiple of 32!"

@@ -1057,9 +1053,7 @@ static void NCR5380_main (struct work_st
 #ifdef SUPPORT_TAGS
 		    cmd_get_tag( tmp, tmp->cmnd[0] != REQUEST_SENSE );
 #endif
-		    if (!NCR5380_select(instance, tmp, 
-			    (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE : 
-			    TAG_NEXT)) {
+		    if (!NCR5380_select(instance, tmp)) {
 			break;
 		    } else {
 			local_irq_disable();

@@ -1292,16 +1286,14 @@ static void collect_stats(struct NCR5380
 
 /* 
  * Function : int NCR5380_select(struct Scsi_Host *instance,
- * 				 struct scsi_cmnd *cmd,	int tag);
+ *				 struct scsi_cmnd *cmd)
  *
  * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
  *	including ARBITRATION, SELECTION, and initial message out for 
  *	IDENTIFY and queue messages. 
  *
  * Inputs : instance - instantiation of the 5380 driver on which this 
- * 	target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for 
- *	new tag, TAG_NONE for untagged queueing, otherwise set to the tag for 
- *	the command that is presently connected.
+ *	target lives, cmd - SCSI command to execute.
  * 
  * Returns : -1 if selection could not execute for some reason,
  *	0 if selection succeeded or failed because the target 

@@ -1321,8 +1313,7 @@ static void collect_stats(struct NCR5380
  *		cmd->result host byte set to DID_BAD_TARGET.
  */
 
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd,
-			  int tag)
+static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
 {
     SETUP_HOSTDATA(instance);
     unsigned char tmp[3], phase;

@@ -2736,7 +2727,7 @@ static int NCR5380_abort(struct scsi_cmn
             local_irq_restore(flags);
 	    dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
   
-            if (NCR5380_select (instance, cmd, (int) cmd->tag)) 
+	    if (NCR5380_select(instance, cmd))
 		return FAILED;
 
 	    dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);

Index: linux/drivers/scsi/NCR5380.c
===================================================================
@@ -1073,14 +1073,14 @@ static void NCR5380_main(struct work_str
 					hostdata->selecting = NULL;
 					/* RvC: have to preset this to indicate a new command is being performed */
 
-					if (!NCR5380_select(instance, tmp,
-							    /* 
-							     * REQUEST SENSE commands are issued without tagged
-							     * queueing, even on SCSI-II devices because the 
-							     * contingent allegiance condition exists for the 
-							     * entire unit.
-							     */
-							    (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE : TAG_NEXT)) {
+					/*
+					 * REQUEST SENSE commands are issued without tagged
+					 * queueing, even on SCSI-II devices because the
+					 * contingent allegiance condition exists for the
+					 * entire unit.
+					 */
+
+					if (!NCR5380_select(instance, tmp)) {
 						break;
 					} else {
 						LIST(tmp, hostdata->issue_queue);

@@ -1097,7 +1097,7 @@ static void NCR5380_main(struct work_str
 		if (hostdata->selecting) {
 			tmp = (Scsi_Cmnd *) hostdata->selecting;
 			/* Selection will drop and retake the lock */
-			if (!NCR5380_select(instance, tmp, (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE : TAG_NEXT)) {
+			if (!NCR5380_select(instance, tmp)) {
 				/* Ok ?? */
 			} else {
 				/* RvC: device failed, so we wait a long time

@@ -1246,17 +1246,14 @@ static void collect_stats(struct NCR5380
 
 
 /* 
- * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd, 
- *      int tag);
+ * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd)
  *
  * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
  *      including ARBITRATION, SELECTION, and initial message out for 
  *      IDENTIFY and queue messages. 
  *
  * Inputs : instance - instantiation of the 5380 driver on which this 
- *      target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for 
- *      new tag, TAG_NONE for untagged queueing, otherwise set to the tag for 
- *      the command that is presently connected.
+ *      target lives, cmd - SCSI command to execute.
  * 
  * Returns : -1 if selection could not execute for some reason,
  *      0 if selection succeeded or failed because the target 

@@ -1278,7 +1275,7 @@ static void collect_stats(struct NCR5380
  *	Locks: caller holds hostdata lock in IRQ mode
  */
  
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag) 
+static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd)
 {
 	NCR5380_local_declare();
 	struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;

@@ -2774,7 +2771,7 @@ static int NCR5380_abort(Scsi_Cmnd * cmd
 		if (cmd == tmp) {
 			dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
 
-			if (NCR5380_select(instance, cmd, (int) cmd->tag))
+			if (NCR5380_select(instance, cmd))
 				return FAILED;
 			dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
 

Index: linux/drivers/scsi/NCR5380.h
===================================================================
@@ -224,14 +224,11 @@
 #define DISCONNECT_LONG		2
 
 /* 
- * These are "special" values for the tag parameter passed to NCR5380_select.
+ * "Special" value for the (unsigned char) command tag, to indicate
+ * I_T_L nexus instead of I_T_L_Q.
  */
 
-#define TAG_NEXT	-1	/* Use next free tag */
-#define TAG_NONE	-2	/* 
-				 * Establish I_T_L nexus instead of I_T_L_Q
-				 * even on SCSI-II devices.
-				 */
+#define TAG_NONE	0xff
 
 /*
  * These are "special" values for the irq and dma_channel fields of the 

@@ -323,7 +320,7 @@ static irqreturn_t NCR5380_intr(int irq,
 static void NCR5380_main(struct work_struct *work);
 static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
 static void NCR5380_reselect(struct Scsi_Host *instance);
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
+static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd);
 #if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
 static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
 #endif

Index: linux/drivers/scsi/dtc.c
===================================================================
@@ -19,24 +19,9 @@
  *      +1 (303) 440-4894
  *
  * DISTRIBUTION RELEASE 1.
- *
- * For more information, please consult 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
-*/
+ */
 
 /*
- * Options : 
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking.  Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. 
- *		You probably want this.
- *
  * The card is detected and initialized in one of several ways : 
  * 1.  Autoprobe (default) - since the board is memory mapped, 
  *     a BIOS signature is scanned for to locate the registers.

Index: linux/drivers/scsi/g_NCR5380.c
===================================================================
@@ -20,18 +20,6 @@
  * Thomas Sailer, [email protected]
  *
  * ALPHA RELEASE 1. 
- *
- * For more information, please consult 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 /* 

@@ -40,10 +28,6 @@
  */
 
 /*
- * Options :
- *
- * PARITY - enable parity checking.  Not supported.
- *
  * The card is detected and initialized in one of several ways : 
  * 1.  With command line overrides - NCR5380=port,irq may be 
  *     used on the LILO command line to override the defaults.

Index: linux/drivers/scsi/pas16.c
===================================================================
@@ -22,40 +22,9 @@
  * Media Vision
  * (510) 770-8600
  * (800) 348-7116
- * 
- * and 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 /*
- * Options : 
- * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512
- *      bytes at a time.  Since interrupts are disabled by default during
- *      these transfers, we might need this to give reasonable interrupt
- *      service time if the transfer size gets too large.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking.  Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers.  This
- *	    parameter comes from the NCR5380 code.  It is NOT unsafe with
- *	    the PAS16 and you should use it.  If you don't you will have
- *	    a problem with dropped characters during high speed
- *	    communications during SCSI transfers.  If you really don't
- *	    want to use UNSAFE you can try defining LIMIT_TRANSFERSIZE or
- *	    twiddle with the transfer size in the high level code.
- *
  * The card is detected and initialized in one of several ways : 
  * 1.  Autoprobe (default) - There are many different models of
  *     the Pro Audio Spectrum/Studio 16, and I only have one of

Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
@@ -22,27 +22,6 @@
  * Copyright 1995, Russell King
  *
  * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
- */
-
-
-/*
- * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
- *
- * Options :
- *
- * PARITY - enable parity checking.  Not supported.
  */
 
 #include <linux/types.h>

Index: linux/drivers/scsi/t128.c
===================================================================
@@ -23,32 +23,9 @@
  * 5415 Randall Place
  * Fremont, CA 94538
  * 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- * 
- * and 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 /*
- * Options : 
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking.  Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers.  You
- *          only really want to use this if you're having a problem with
- *          dropped characters during high speed communications, and even
- *          then, you're going to be better off twiddling with transfersize.
- *
  * The card is detected and initialized in one of several ways : 
  * 1.  Autoprobe (default) - since the board is memory mapped, 
  *     a BIOS signature is scanned for to locate the registers.

Index: linux/drivers/scsi/dtc.h
===================================================================
@@ -7,22 +7,6 @@
  *      +1 (303) 440-4894
  *
  * DISTRIBUTION RELEASE 2. 
- *
- * For more information, please consult 
- *
- * 
- * 
- * and 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 #ifndef DTC3280_H

Index: linux/drivers/scsi/g_NCR5380.h
===================================================================
@@ -11,18 +11,6 @@
  *    [email protected]
  *
  * ALPHA RELEASE 1. 
- *
- * For more information, please consult 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 #ifndef GENERIC_NCR5380_H

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -11,18 +11,6 @@
  * Copyright 1995, Russell King
  *
  * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 #include <linux/types.h>

Index: linux/drivers/scsi/mac_scsi.h
===================================================================
@@ -8,18 +8,6 @@
  *      +1 (303) 440-4894
  *
  * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 #ifndef MAC_NCR5380_H

Index: linux/drivers/scsi/pas16.h
===================================================================
@@ -18,18 +18,6 @@
  * Media Vision
  * (510) 770-8600
  * (800) 348-7116
- * 
- * and 
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -15,18 +15,6 @@
  *      +1 (303) 440-4894
  *
  * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 #ifndef SUN3_SCSI_H

Index: linux/drivers/scsi/t128.h
===================================================================
@@ -20,18 +20,6 @@
  * 5415 Randall Place
  * Fremont, CA 94538
  * 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
  */
 
 #ifndef T128_H

Index: linux/drivers/scsi/NCR5380.c
===================================================================
@@ -833,18 +833,6 @@ static int NCR5380_init(struct Scsi_Host
 	
 	INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main);
 	
-#ifdef NCR5380_STATS
-	for (i = 0; i < 8; ++i) {
-		hostdata->time_read[i] = 0;
-		hostdata->time_write[i] = 0;
-		hostdata->bytes_read[i] = 0;
-		hostdata->bytes_write[i] = 0;
-	}
-	hostdata->timebase = 0;
-	hostdata->pendingw = 0;
-	hostdata->pendingr = 0;
-#endif
-
 	/* The CHECK code seems to break the 53C400. Will check it later maybe */
 	if (flags & FLAG_NCR53C400)
 		hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags;

@@ -943,25 +931,6 @@ static int NCR5380_queue_command_lck(Scs
 	}
 #endif				/* (NDEBUG & NDEBUG_NO_WRITE) */
 
-#ifdef NCR5380_STATS
-	switch (cmd->cmnd[0]) {
-		case WRITE:
-		case WRITE_6:
-		case WRITE_10:
-			hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
-			hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);
-			hostdata->pendingw++;
-			break;
-		case READ:
-		case READ_6:
-		case READ_10:
-			hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
-			hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);
-			hostdata->pendingr++;
-			break;
-	}
-#endif
-
 	/* 
 	 * We use the host_scribble field as a pointer to the next command  
 	 * in a queue 

@@ -1207,35 +1176,6 @@ static irqreturn_t NCR5380_intr(int dumm
 
 #endif 
 
-/**
- *	collect_stats		-	collect stats on a scsi command
- *	@hostdata: adapter 
- *	@cmd: command being issued
- *
- *	Update the statistical data by parsing the command in question
- */
- 
-static void collect_stats(struct NCR5380_hostdata *hostdata, Scsi_Cmnd * cmd) 
-{
-#ifdef NCR5380_STATS
-	switch (cmd->cmnd[0]) {
-	case WRITE:
-	case WRITE_6:
-	case WRITE_10:
-		hostdata->time_write[scmd_id(cmd)] += (jiffies - hostdata->timebase);
-		hostdata->pendingw--;
-		break;
-	case READ:
-	case READ_6:
-	case READ_10:
-		hostdata->time_read[scmd_id(cmd)] += (jiffies - hostdata->timebase);
-		hostdata->pendingr--;
-		break;
-	}
-#endif
-}
-
-
 /* 
  * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd)
  *

@@ -1464,7 +1404,6 @@ part2:
 			return -1;
 		}
 		cmd->result = DID_BAD_TARGET << 16;
-		collect_stats(hostdata, cmd);
 		cmd->scsi_done(cmd);
 		NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
 		dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);

@@ -2216,7 +2155,6 @@ static void NCR5380_information_transfer
 					cmd->next_link->tag = cmd->tag;
 					cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
 					dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked request done, calling scsi_done().\n", instance->host_no, cmd->device->id, cmd->device->lun);
-					collect_stats(hostdata, cmd);
 					cmd->scsi_done(cmd);
 					cmd = hostdata->connected;
 					break;

@@ -2268,7 +2206,6 @@ static void NCR5380_information_transfer
 						hostdata->issue_queue = (Scsi_Cmnd *) cmd;
 						dprintk(NDEBUG_QUEUES, "scsi%d : REQUEST SENSE added to head of issue queue\n", instance->host_no);
 					} else {
-						collect_stats(hostdata, cmd);
 						cmd->scsi_done(cmd);
 					}
 

@@ -2415,7 +2352,6 @@ static void NCR5380_information_transfer
 					hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
 					hostdata->connected = NULL;
 					cmd->result = DID_ERROR << 16;
-					collect_stats(hostdata, cmd);
 					cmd->scsi_done(cmd);
 					NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
 					return;

Index: linux/drivers/scsi/NCR5380.h
===================================================================
@@ -272,15 +272,6 @@ struct NCR5380_hostdata {
 	int select_time;			/* timer in select for target response */
 	volatile Scsi_Cmnd *selecting;
 	struct delayed_work coroutine;		/* our co-routine */
-#ifdef NCR5380_STATS
-	unsigned timebase;			/* Base for time calcs */
-	long time_read[8];			/* time to do reads */
-	long time_write[8];			/* time to do writes */
-	unsigned long bytes_read[8];		/* bytes read */
-	unsigned long bytes_write[8];		/* bytes written */
-	unsigned pendingr;
-	unsigned pendingw;
-#endif
 	struct scsi_eh_save ses;
 };
 

101 lines not on this page · raw message

63 lines not on this page · raw message

105 lines not on this page · raw message

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -177,13 +177,12 @@ int __init macscsi_detect(struct scsi_ho
     if (macintosh_config->scsi_type != MAC_SCSI_OLD)
 	return( 0 );
 
-    /* setup variables */
-    tpnt->can_queue =
-	(setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
-    tpnt->cmd_per_lun =
-	(setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
-    tpnt->sg_tablesize = 
-	(setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
+	if (setup_can_queue > 0)
+		tpnt->can_queue = setup_can_queue;
+	if (setup_cmd_per_lun > 0)
+		tpnt->cmd_per_lun = setup_cmd_per_lun;
+	if (setup_sg_tablesize >= 0)
+		tpnt->sg_tablesize = setup_sg_tablesize;
 
     if (setup_hostid >= 0)
 	tpnt->this_id = setup_hostid;

@@ -194,7 +193,7 @@ int __init macscsi_detect(struct scsi_ho
 
 #ifdef SUPPORT_TAGS
     if (setup_use_tagged_queuing < 0)
-	setup_use_tagged_queuing = USE_TAGGED_QUEUING;
+	setup_use_tagged_queuing = 0;
 #endif
 
     /* Once we support multiple 5380s (e.g. DuoDock) we'll do

@@ -496,10 +495,10 @@ static struct scsi_host_template driver_
 	.queuecommand			= macscsi_queue_command,
 	.eh_abort_handler		= macscsi_abort,
 	.eh_bus_reset_handler		= macscsi_bus_reset,
-	.can_queue			= CAN_QUEUE,
+	.can_queue			= 16,
 	.this_id			= 7,
 	.sg_tablesize			= SG_ALL,
-	.cmd_per_lun			= CMD_PER_LUN,
+	.cmd_per_lun			= 2,
 	.use_clustering			= DISABLE_CLUSTERING
 };
 

Index: linux/drivers/scsi/mac_scsi.h
===================================================================
@@ -17,22 +17,6 @@
 
 #ifndef ASM
 
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
-#ifndef SG_TABLESIZE
-#define SG_TABLESIZE SG_NONE
-#endif
-
-#ifndef USE_TAGGED_QUEUING
-#define	USE_TAGGED_QUEUING 0
-#endif
-
 #include <scsi/scsicam.h>
 
 #define NCR5380_implementation_fields /* none */

Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
@@ -198,12 +198,12 @@ static int __init sun3scsi_detect(struct
 #endif
 
 	/* setup variables */
-	tpnt->can_queue =
-		(setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
-	tpnt->cmd_per_lun =
-		(setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
-	tpnt->sg_tablesize = 
-		(setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
+	if (setup_can_queue > 0)
+		tpnt->can_queue = setup_can_queue;
+	if (setup_cmd_per_lun > 0)
+		tpnt->cmd_per_lun = setup_cmd_per_lun;
+	if (setup_sg_tablesize >= 0)
+		tpnt->sg_tablesize = setup_sg_tablesize;
 
 	if (setup_hostid >= 0)
 		tpnt->this_id = setup_hostid;

@@ -257,7 +257,7 @@ static int __init sun3scsi_detect(struct
 #endif
 #ifdef SUPPORT_TAGS
 	if (setup_use_tagged_queuing < 0)
-		setup_use_tagged_queuing = USE_TAGGED_QUEUING;
+		setup_use_tagged_queuing = 1;
 #endif
 
 	instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));

@@ -683,10 +683,10 @@ static struct scsi_host_template driver_
 	.queuecommand		= sun3scsi_queue_command,
 	.eh_abort_handler      	= sun3scsi_abort,
 	.eh_bus_reset_handler  	= sun3scsi_bus_reset,
-	.can_queue		= CAN_QUEUE,
+	.can_queue		= 16,
 	.this_id		= 7,
-	.sg_tablesize		= SG_TABLESIZE,
-	.cmd_per_lun		= CMD_PER_LUN,
+	.sg_tablesize		= SG_NONE,
+	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING
 };
 

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -31,25 +31,7 @@
 
 #define IOBASE_SUN3_VMESCSI 0xff200000
 
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
-#ifndef SG_TABLESIZE
-#define SG_TABLESIZE SG_NONE
-#endif
-
-#ifndef MAX_TAGS
 #define MAX_TAGS 32
-#endif
-
-#ifndef USE_TAGGED_QUEUING
-#define	USE_TAGGED_QUEUING 1
-#endif
 
 #include <scsi/scsicam.h>
 

Index: linux/drivers/scsi/atari_scsi.c
===================================================================
@@ -611,7 +611,7 @@ static int __init atari_scsi_detect(stru
 
 #ifdef SUPPORT_TAGS
 	if (setup_use_tagged_queuing < 0)
-		setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING;
+		setup_use_tagged_queuing = 0;
 #endif
 #ifdef REAL_DMA
 	/* If running on a Falcon and if there's TT-Ram (i.e., more than one

Index: linux/drivers/scsi/atari_scsi.h
===================================================================
@@ -36,9 +36,6 @@
 #define ATARI_FALCON_CMD_PER_LUN	1
 #define ATARI_FALCON_SG_TABLESIZE	SG_NONE
 
-#define	DEFAULT_USE_TAGGED_QUEUING	0
-
-
 #define	NCR5380_implementation_fields	/* none */
 
 #define NCR5380_read(reg)		  atari_scsi_reg_read( reg )

Index: linux/drivers/scsi/dmx3191d.c
===================================================================
@@ -34,6 +34,8 @@
  * Definitions for the generic 5380 driver.
  */
 
+#define DONT_USE_INTR
+
 #define NCR5380_read(reg)		inb(port + reg)
 #define NCR5380_write(reg, value)	outb(value, port + reg)
 

@@ -89,32 +91,23 @@ static int dmx3191d_probe_one(struct pci
 	if (!shost)
 		goto out_release_region;       
 	shost->io_port = io;
-	shost->irq = pdev->irq;
 
-	NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+	/* This card does not seem to raise an interrupt on pdev->irq.
+	 * Steam-powered SCSI controllers run without an IRQ anyway.
+	 */
+	shost->irq = NO_IRQ;
 
-	if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
-				DMX3191D_DRIVER_NAME, shost)) {
-		/*
-		 * Steam powered scsi controllers run without an IRQ anyway
-		 */
-		printk(KERN_WARNING "dmx3191: IRQ %d not available - "
-				    "switching to polled mode.\n", pdev->irq);
-		shost->irq = NO_IRQ;
-	}
+	NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
 
 	pci_set_drvdata(pdev, shost);
 
 	error = scsi_add_host(shost, &pdev->dev);
 	if (error)
-		goto out_free_irq;
+		goto out_release_region;
 
 	scsi_scan_host(shost);
 	return 0;
 
- out_free_irq:
-	if (shost->irq != NO_IRQ)
-		free_irq(shost->irq, shost);
  out_release_region:
 	release_region(io, DMX3191D_REGION_LEN);
  out_disable_device:

@@ -131,8 +124,6 @@ static void dmx3191d_remove_one(struct p
 
 	NCR5380_exit(shost);
 
-	if (shost->irq != NO_IRQ)
-		free_irq(shost->irq, shost);
 	release_region(shost->io_port, DMX3191D_REGION_LEN);
 	pci_disable_device(pdev);
 

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -31,10 +31,29 @@
 #include <asm/mac_via.h>
 
 #include <scsi/scsi_host.h>
-#include "mac_scsi.h"
+
+/* Definitions for the core NCR5380 driver. */
 
 #define PSEUDO_DMA
 
+#define NCR5380_implementation_fields   /* none */
+#define NCR5380_local_declare()         struct Scsi_Host *_instance
+#define NCR5380_setup(instance)         _instance = instance
+
+#define NCR5380_read(reg)               macscsi_read(_instance, reg)
+#define NCR5380_write(reg, value)       macscsi_write(_instance, reg, value)
+
+#define NCR5380_pread                   macscsi_pread
+#define NCR5380_pwrite                  macscsi_pwrite
+
+#define NCR5380_intr                    macscsi_intr
+#define NCR5380_queue_command           macscsi_queue_command
+#define NCR5380_abort                   macscsi_abort
+#define NCR5380_bus_reset               macscsi_bus_reset
+#define NCR5380_info                    macscsi_info
+#define NCR5380_show_info               macscsi_show_info
+#define NCR5380_write_info              macscsi_write_info
+
 #include "NCR5380.h"
 
 #define RESET_BOOT

42 lines not on this page · raw message

155 lines not on this page · raw message

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -86,9 +86,9 @@ module_param(setup_hostid, int, 0);
 #define	AFTER_RESET_DELAY	(HZ/2)
 #endif
 
-static volatile unsigned char *mac_scsi_regp = NULL;
-static volatile unsigned char *mac_scsi_drq  = NULL;
-static volatile unsigned char *mac_scsi_nodrq = NULL;
+static unsigned char *mac_scsi_regp;
+static unsigned char *mac_scsi_drq;
+static unsigned char *mac_scsi_nodrq;
 
 
 /*

@@ -262,6 +262,7 @@ static void mac_scsi_reset_boot(struct S
 }
 #endif
 
+#ifdef PSEUDO_DMA
 /* 
    Pseudo-DMA: (Ove Edlund)
    The code attempts to catch bus errors that occur if one for example

@@ -331,38 +332,38 @@ __asm__ __volatile__					\
      : "0"(s), "1"(d), "2"(len)				\
      : "d0")
 
-
-static int macscsi_pread (struct Scsi_Host *instance,
-			  unsigned char *dst, int len)
+static int macscsi_pread(struct Scsi_Host *instance,
+                         unsigned char *dst, int len)
 {
-   unsigned char *d;
-   volatile unsigned char *s;
+	unsigned char *d;
+	unsigned char *s;
+
+	NCR5380_local_declare();
+	NCR5380_setup(instance);
+
+	s = mac_scsi_drq + (INPUT_DATA_REG << 4);
+	d = dst;
 
-   NCR5380_local_declare();
-   NCR5380_setup(instance);
+	/* These conditions are derived from MacOS */
 
-   s = mac_scsi_drq+0x60;
-   d = dst;
+	while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
+	       !(NCR5380_read(STATUS_REG) & SR_REQ))
+		;
+
+	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
+	    (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
+		pr_err("Error in macscsi_pread\n");
+		return -1;
+	}
 
-/* These conditions are derived from MacOS */
-
-   while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 
-         && !(NCR5380_read(STATUS_REG) & SR_REQ))
-      ;
-   if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 
-         && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
-      printk(KERN_ERR "Error in macscsi_pread\n");
-      return -1;
-   }
-
-   CP_IO_TO_MEM(s, d, len);
-   
-   if (len != 0) {
-      printk(KERN_NOTICE "Bus error in macscsi_pread\n");
-      return -1;
-   }
-   
-   return 0;
+	CP_IO_TO_MEM(s, d, len);
+
+	if (len != 0) {
+		pr_notice("Bus error in macscsi_pread\n");
+		return -1;
+	}
+
+	return 0;
 }
 
 

@@ -424,39 +425,40 @@ __asm__ __volatile__					\
      : "0"(s), "1"(d), "2"(len)				\
      : "d0")
 
-static int macscsi_pwrite (struct Scsi_Host *instance,
-				  unsigned char *src, int len)
+static int macscsi_pwrite(struct Scsi_Host *instance,
+                          unsigned char *src, int len)
 {
-   unsigned char *s;
-   volatile unsigned char *d;
+	unsigned char *s;
+	unsigned char *d;
+
+	NCR5380_local_declare();
+	NCR5380_setup(instance);
 
-   NCR5380_local_declare();
-   NCR5380_setup(instance);
+	s = src;
+	d = mac_scsi_drq + (OUTPUT_DATA_REG << 4);
 
-   s = src;
-   d = mac_scsi_drq;
-   
-/* These conditions are derived from MacOS */
-
-   while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) 
-         && (!(NCR5380_read(STATUS_REG) & SR_REQ) 
-            || (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH))) 
-      ;
-   if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
-      printk(KERN_ERR "Error in macscsi_pwrite\n");
-      return -1;
-   }
-
-   CP_MEM_TO_IO(s, d, len);   
-
-   if (len != 0) {
-      printk(KERN_NOTICE "Bus error in macscsi_pwrite\n");
-      return -1;
-   }
-   
-   return 0;
-}
+	/* These conditions are derived from MacOS */
+
+	while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
+	       (!(NCR5380_read(STATUS_REG) & SR_REQ) ||
+	        (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
+		;
+
+	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
+		pr_err("Error in macscsi_pwrite\n");
+		return -1;
+	}
+
+	CP_MEM_TO_IO(s, d, len);
 
+	if (len != 0) {
+		pr_notice("Bus error in macscsi_pwrite\n");
+		return -1;
+	}
+
+	return 0;
+}
+#endif
 
 #include "NCR5380.c"
 

Index: linux/drivers/scsi/mac_scsi.c
===================================================================
@@ -12,23 +12,18 @@
  */
 
 #include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/ctype.h>
 #include <linux/delay.h>
-
 #include <linux/module.h>
-#include <linux/signal.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 
+#include <asm/hwtest.h>
 #include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/macintosh.h>
 #include <asm/macints.h>
-#include <asm/mac_via.h>
+#include <asm/setup.h>
 
 #include <scsi/scsi_host.h>
 

@@ -36,7 +31,7 @@
 
 #define PSEUDO_DMA
 
-#define NCR5380_implementation_fields   /* none */
+#define NCR5380_implementation_fields   unsigned char *pdma_base
 #define NCR5380_local_declare()         struct Scsi_Host *_instance
 #define NCR5380_setup(instance)         _instance = instance
 

@@ -58,10 +53,6 @@
 
 #define RESET_BOOT
 
-#ifdef RESET_BOOT
-static void mac_scsi_reset_boot(struct Scsi_Host *instance);
-#endif
-
 static int setup_can_queue = -1;
 module_param(setup_can_queue, int, 0);
 static int setup_cmd_per_lun = -1;

@@ -86,23 +77,18 @@ module_param(setup_hostid, int, 0);
 #define	AFTER_RESET_DELAY	(HZ/2)
 #endif
 
-static unsigned char *mac_scsi_regp;
-static unsigned char *mac_scsi_drq;
-static unsigned char *mac_scsi_nodrq;
-
-
 /*
  * NCR 5380 register access functions
  */
 
-static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg)
+static inline char macscsi_read(struct Scsi_Host *instance, int reg)
 {
-  return in_8(instance->io_port + (reg<<4));
+	return in_8(instance->base + (reg << 4));
 }
 
-static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value)
+static inline void macscsi_write(struct Scsi_Host *instance, int reg, int value)
 {
-  out_8(instance->io_port + (reg<<4), value);
+	out_8(instance->base + (reg << 4), value);
 }
 
 #ifndef MODULE

@@ -134,96 +120,6 @@ static int __init mac_scsi_setup(char *s
 __setup("mac5380=", mac_scsi_setup);
 #endif /* !MODULE */
 
-/*
- * Function : int macscsi_detect(struct scsi_host_template * tpnt)
- *
- * Purpose : initializes mac NCR5380 driver based on the
- *	command line / compile time port and irq definitions.
- *
- * Inputs : tpnt - template for this SCSI adapter.
- *
- * Returns : 1 if a host adapter was found, 0 if not.
- *
- */
- 
-int __init macscsi_detect(struct scsi_host_template * tpnt)
-{
-    static int called = 0;
-    int flags = 0;
-    struct Scsi_Host *instance;
-
-    if (!MACH_IS_MAC || called)
-	return( 0 );
-
-    if (macintosh_config->scsi_type != MAC_SCSI_OLD)
-	return( 0 );
-
-	if (setup_can_queue > 0)
-		tpnt->can_queue = setup_can_queue;
-	if (setup_cmd_per_lun > 0)
-		tpnt->cmd_per_lun = setup_cmd_per_lun;
-	if (setup_sg_tablesize >= 0)
-		tpnt->sg_tablesize = setup_sg_tablesize;
-	if (setup_hostid >= 0)
-		tpnt->this_id = setup_hostid & 7;
-
-#ifdef SUPPORT_TAGS
-    if (setup_use_tagged_queuing < 0)
-	setup_use_tagged_queuing = 0;
-#endif
-
-    /* Once we support multiple 5380s (e.g. DuoDock) we'll do
-       something different here */
-    instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
-    if (instance == NULL)
-	return 0;
-
-    if (macintosh_config->ident == MAC_MODEL_IIFX) {
-	mac_scsi_regp  = (unsigned char *) VIA1_BASE + 0x8000;
-	mac_scsi_drq   = (unsigned char *) VIA1_BASE + 0xE000;
-	mac_scsi_nodrq = (unsigned char *) VIA1_BASE + 0xC000;
-	/* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */
-	flags = FLAG_NO_PSEUDO_DMA;
-    } else {
-	mac_scsi_regp  = (unsigned char *) VIA1_BASE + 0x10000;
-	mac_scsi_drq   = (unsigned char *) VIA1_BASE + 0x6000;
-	mac_scsi_nodrq = (unsigned char *) VIA1_BASE + 0x12000;
-    }
-
-    if (! setup_use_pdma)
-	flags = FLAG_NO_PSEUDO_DMA;
-	
-    instance->io_port = (unsigned long) mac_scsi_regp;
-    instance->irq = IRQ_MAC_SCSI;
-
-#ifdef RESET_BOOT   
-    mac_scsi_reset_boot(instance);
-#endif
-    
-    NCR5380_init(instance, flags);
-
-    instance->n_io_port = 255;
-
-    if (instance->irq != NO_IRQ)
-	if (request_irq(instance->irq, NCR5380_intr, 0, "ncr5380", instance)) {
-	    printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
-		   instance->host_no, instance->irq);
-	    instance->irq = NO_IRQ;
-	}
-
-    called = 1;
-    return 1;
-}
-
-int macscsi_release (struct Scsi_Host *shpnt)
-{
-	if (shpnt->irq != NO_IRQ)
-		free_irq(shpnt->irq, shpnt);
-	NCR5380_exit(shpnt);
-
-	return 0;
-}
-
 #ifdef RESET_BOOT
 /*
  * Our 'bus reset on boot' function

@@ -335,13 +231,14 @@ __asm__ __volatile__					\
 static int macscsi_pread(struct Scsi_Host *instance,
                          unsigned char *dst, int len)
 {
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	unsigned char *d;
 	unsigned char *s;
 
 	NCR5380_local_declare();
 	NCR5380_setup(instance);
 
-	s = mac_scsi_drq + (INPUT_DATA_REG << 4);
+	s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
 	d = dst;
 
 	/* These conditions are derived from MacOS */

@@ -428,6 +325,7 @@ __asm__ __volatile__					\
 static int macscsi_pwrite(struct Scsi_Host *instance,
                           unsigned char *src, int len)
 {
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	unsigned char *s;
 	unsigned char *d;
 

@@ -435,7 +333,7 @@ static int macscsi_pwrite(struct Scsi_Ho
 	NCR5380_setup(instance);
 
 	s = src;
-	d = mac_scsi_drq + (OUTPUT_DATA_REG << 4);
+	d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
 
 	/* These conditions are derived from MacOS */
 

@@ -462,13 +360,15 @@ static int macscsi_pwrite(struct Scsi_Ho
 
 #include "NCR5380.c"
 
-static struct scsi_host_template driver_template = {
-	.proc_name			= "Mac5380",
+#define DRV_MODULE_NAME         "mac_scsi"
+#define PFX                     DRV_MODULE_NAME ": "
+
+static struct scsi_host_template mac_scsi_template = {
+	.module				= THIS_MODULE,
+	.proc_name			= DRV_MODULE_NAME,
 	.show_info			= macscsi_show_info,
 	.write_info			= macscsi_write_info,
 	.name				= "Macintosh NCR5380 SCSI",
-	.detect				= macscsi_detect,
-	.release			= macscsi_release,
 	.info				= macscsi_info,
 	.queuecommand			= macscsi_queue_command,
 	.eh_abort_handler		= macscsi_abort,

@@ -480,7 +380,114 @@ static struct scsi_host_template driver_
 	.use_clustering			= DISABLE_CLUSTERING
 };
 
+static int __init mac_scsi_probe(struct platform_device *pdev)
+{
+	struct Scsi_Host *instance;
+	int error;
+	int host_flags = 0;
+	struct resource *irq, *pio_mem, *pdma_mem = NULL;
+
+	pio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pio_mem)
+		return -ENODEV;
+
+#ifdef PSEUDO_DMA
+	pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+#endif
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (!hwreg_present((unsigned char *)pio_mem->start +
+	                   (STATUS_REG << 4))) {
+		pr_info(PFX "no device detected at %pap\n", &pio_mem->start);
+		return -ENODEV;
+	}
+
+	if (setup_can_queue > 0)
+		mac_scsi_template.can_queue = setup_can_queue;
+	if (setup_cmd_per_lun > 0)
+		mac_scsi_template.cmd_per_lun = setup_cmd_per_lun;
+	if (setup_sg_tablesize >= 0)
+		mac_scsi_template.sg_tablesize = setup_sg_tablesize;
+	if (setup_hostid >= 0)
+		mac_scsi_template.this_id = setup_hostid & 7;
+#ifdef SUPPORT_TAGS
+	if (setup_use_tagged_queuing < 0)
+		setup_use_tagged_queuing = 0;
+#endif
+	if (setup_use_pdma < 0)
+		setup_use_pdma = 0;
+
+	instance = scsi_host_alloc(&mac_scsi_template,
+	                           sizeof(struct NCR5380_hostdata));
+	if (!instance)
+		return -ENOMEM;
+
+	instance->base = pio_mem->start;
+	if (irq)
+		instance->irq = irq->start;
+	else
+		instance->irq = NO_IRQ;
+
+	if (pdma_mem && setup_use_pdma) {
+		struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+		hostdata->pdma_base = (unsigned char *)pdma_mem->start;
+	} else
+		host_flags |= FLAG_NO_PSEUDO_DMA;
+
+#ifdef RESET_BOOT
+	mac_scsi_reset_boot(instance);
+#endif
+
+	NCR5380_init(instance, host_flags);
+
+	if (instance->irq != NO_IRQ) {
+		error = request_irq(instance->irq, macscsi_intr, IRQF_SHARED,
+		                    "NCR5380", instance);
+		if (error)
+			goto fail_irq;
+	}
+
+	error = scsi_add_host(instance, NULL);
+	if (error)
+		goto fail_host;
+
+	platform_set_drvdata(pdev, instance);
+
+	scsi_scan_host(instance);
+	return 0;
+
+fail_host:
+	if (instance->irq != NO_IRQ)
+		free_irq(instance->irq, instance);
+fail_irq:
+	NCR5380_exit(instance);
+	scsi_host_put(instance);
+	return error;
+}
+
+static int __exit mac_scsi_remove(struct platform_device *pdev)
+{
+	struct Scsi_Host *instance = platform_get_drvdata(pdev);
+
+	scsi_remove_host(instance);
+	if (instance->irq != NO_IRQ)
+		free_irq(instance->irq, instance);
+	NCR5380_exit(instance);
+	scsi_host_put(instance);
+	return 0;
+}
+
+static struct platform_driver mac_scsi_driver = {
+	.remove = __exit_p(mac_scsi_remove),
+	.driver = {
+		.name	= DRV_MODULE_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
 
-#include "scsi_module.c"
+module_platform_driver_probe(mac_scsi_driver, mac_scsi_probe);
 
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
 MODULE_LICENSE("GPL");

242 lines not on this page · raw message

Index: linux/arch/m68k/include/asm/macintosh.h
===================================================================
@@ -53,6 +53,10 @@ struct mac_model
 #define MAC_SCSI_QUADRA		2
 #define MAC_SCSI_QUADRA2	3
 #define MAC_SCSI_QUADRA3	4
+#define MAC_SCSI_IIFX		5
+#define MAC_SCSI_DUO		6
+#define MAC_SCSI_CCL		7
+#define MAC_SCSI_LATE		8
 
 #define MAC_IDE_NONE		0
 #define MAC_IDE_QUADRA		1

Index: linux/arch/m68k/atari/stdma.c
===================================================================
@@ -59,6 +59,31 @@ static irqreturn_t stdma_int (int irq, v
 /************************* End of Prototypes **************************/
 
 
+/**
+ * stdma_try_lock - attempt to acquire ST DMA interrupt "lock"
+ * @handler: interrupt handler to use after acquisition
+ *
+ * Returns !0 if lock was acquired; otherwise 0.
+ */
+
+int stdma_try_lock(irq_handler_t handler, void *data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (stdma_locked) {
+		local_irq_restore(flags);
+		return 0;
+	}
+
+	stdma_locked   = 1;
+	stdma_isr      = handler;
+	stdma_isr_data = data;
+	local_irq_restore(flags);
+	return 1;
+}
+EXPORT_SYMBOL(stdma_try_lock);
+
 
 /*
  * Function: void stdma_lock( isrfunc isr, void *data )

@@ -78,19 +103,10 @@ static irqreturn_t stdma_int (int irq, v
 
 void stdma_lock(irq_handler_t handler, void *data)
 {
-	unsigned long flags;
-
-	local_irq_save(flags);		/* protect lock */
-
 	/* Since the DMA is used for file system purposes, we
 	 have to sleep uninterruptible (there may be locked
 	 buffers) */
-	wait_event(stdma_wait, !stdma_locked);
-
-	stdma_locked   = 1;
-	stdma_isr      = handler;
-	stdma_isr_data = data;
-	local_irq_restore(flags);
+	wait_event(stdma_wait, stdma_try_lock(handler, data));
 }
 EXPORT_SYMBOL(stdma_lock);
 

@@ -122,22 +138,25 @@ void stdma_release(void)
 EXPORT_SYMBOL(stdma_release);
 
 
-/*
- * Function: int stdma_others_waiting( void )
- *
- * Purpose: Check if someone waits for the ST-DMA lock.
- *
- * Inputs: none
- *
- * Returns: 0 if no one is waiting, != 0 otherwise
+/**
+ * stdma_is_locked_by - allow lock holder to check whether it needs to release.
+ * @handler: interrupt handler previously used to acquire lock.
  *
+ * Returns !0 if locked for the given handler; 0 otherwise.
  */
 
-int stdma_others_waiting(void)
+int stdma_is_locked_by(irq_handler_t handler)
 {
-	return waitqueue_active(&stdma_wait);
+	unsigned long flags;
+	int result;
+
+	local_irq_save(flags);
+	result = stdma_locked && (stdma_isr == handler);
+	local_irq_restore(flags);
+
+	return result;
 }
-EXPORT_SYMBOL(stdma_others_waiting);
+EXPORT_SYMBOL(stdma_is_locked_by);
 
 
 /*

Index: linux/arch/m68k/include/asm/atari_stdma.h
===================================================================
@@ -8,11 +8,11 @@
 
 /***************************** Prototypes *****************************/
 
+int stdma_try_lock(irq_handler_t, void *);
 void stdma_lock(irq_handler_t handler, void *data);
 void stdma_release( void );
-int stdma_others_waiting( void );
 int stdma_islocked( void );
-void *stdma_locked_by( void );
+int stdma_is_locked_by(irq_handler_t);
 void stdma_init( void );
 
 /************************* End of Prototypes **************************/

Index: linux/drivers/scsi/atari_NCR5380.c
===================================================================
@@ -879,10 +879,10 @@ static void NCR5380_exit(struct Scsi_Hos
  *
  */
 
-static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd,
-                                     void (*done)(struct scsi_cmnd *))
+static int NCR5380_queue_command(struct Scsi_Host *instance,
+                                 struct scsi_cmnd *cmd)
 {
-	SETUP_HOSTDATA(cmd->device->host);
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	struct scsi_cmnd *tmp;
 	unsigned long flags;
 

@@ -893,7 +893,7 @@ static int NCR5380_queue_command_lck(str
 		printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
 		       H_NO(cmd));
 		cmd->result = (DID_ERROR << 16);
-		done(cmd);
+		cmd->scsi_done(cmd);
 		return 0;
 	}
 #endif /* (NDEBUG & NDEBUG_NO_WRITE) */

@@ -904,8 +904,6 @@ static int NCR5380_queue_command_lck(str
 	 */
 
 	SET_NEXT(cmd, NULL);
-	cmd->scsi_done = done;
-
 	cmd->result = 0;
 
 	/*

@@ -915,7 +913,6 @@ static int NCR5380_queue_command_lck(str
 	 * sense data is only guaranteed to be valid while the condition exists.
 	 */
 
-	local_irq_save(flags);
 	/* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
 	 * Otherwise a running NCR5380_main may steal the lock.
 	 * Lock before actually inserting due to fairness reasons explained in

@@ -928,11 +925,11 @@ static int NCR5380_queue_command_lck(str
 	 * because also a timer int can trigger an abort or reset, which would
 	 * alter queues and touch the lock.
 	 */
-	if (!IS_A_TT()) {
-		/* perhaps stop command timer here */
-		falcon_get_lock();
-		/* perhaps restart command timer here */
-	}
+	if (!falcon_get_lock())
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	local_irq_save(flags);
+
 	if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
 		LIST(cmd, hostdata->issue_queue);
 		SET_NEXT(cmd, hostdata->issue_queue);

@@ -956,15 +953,13 @@ static int NCR5380_queue_command_lck(str
 	 * If we're not in an interrupt, we can call NCR5380_main()
 	 * unconditionally, because it cannot be already running.
 	 */
-	if (in_interrupt() || ((flags >> 8) & 7) >= 6)
+	if (in_interrupt() || irqs_disabled())
 		queue_main();
 	else
 		NCR5380_main(NULL);
 	return 0;
 }
 
-static DEF_SCSI_QCMD(NCR5380_queue_command)
-
 /*
  * Function : NCR5380_main (void)
  *

@@ -2555,10 +2550,6 @@ int NCR5380_abort(struct scsi_cmnd *cmd)
 
 	local_irq_save(flags);
 
-	if (!IS_A_TT() && !falcon_got_lock)
-		printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_abort\n",
-		       HOSTNO);
-
 	dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
 		    NCR5380_read(BUS_AND_STATUS_REG),
 		    NCR5380_read(STATUS_REG));

@@ -2757,10 +2748,6 @@ static int NCR5380_bus_reset(struct scsi
 	struct scsi_cmnd *connected, *disconnected_queue;
 #endif
 
-	if (!IS_A_TT() && !falcon_got_lock)
-		printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_reset\n",
-		       H_NO(cmd));
-
 	NCR5380_print_status(cmd->device->host);
 
 	/* get in phase */

109 lines not on this page · raw message

Index: linux/arch/m68k/atari/config.c
===================================================================
@@ -858,6 +858,24 @@ static struct platform_device *atari_net
 };
 #endif /* CONFIG_ATARI_ETHERNEC */
 
+#ifdef CONFIG_ATARI_SCSI
+static const struct resource atari_scsi_st_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_MFP_FSCSI,
+		.end   = IRQ_MFP_FSCSI,
+	},
+};
+
+static const struct resource atari_scsi_tt_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_TT_MFP_SCSI,
+		.end   = IRQ_TT_MFP_SCSI,
+	},
+};
+#endif
+
 int __init atari_platform_init(void)
 {
 	int rv = 0;

@@ -892,6 +910,15 @@ int __init atari_platform_init(void)
 	}
 #endif
 
+#ifdef CONFIG_ATARI_SCSI
+	if (ATARIHW_PRESENT(ST_SCSI))
+		platform_device_register_simple("atari_scsi", -1,
+			atari_scsi_st_rsrc, ARRAY_SIZE(atari_scsi_st_rsrc));
+	else if (ATARIHW_PRESENT(TT_SCSI))
+		platform_device_register_simple("atari_scsi", -1,
+			atari_scsi_tt_rsrc, ARRAY_SIZE(atari_scsi_tt_rsrc));
+#endif
+
 	return rv;
 }
 

487 lines not on this page · raw message

Index: linux/drivers/scsi/atari_scsi.h
===================================================================
@@ -18,23 +18,6 @@
 /* (I_HAVE_OVERRUNS stuff removed) */
 
 #ifndef ASM
-/* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary. Higher
- * values should work, too; try it! (but cmd_per_lun costs memory!) */
-
-/* But there seems to be a bug somewhere that requires CAN_QUEUE to be
- * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
- * changed CMD_PER_LUN... */
-
-/* Note: The Falcon currently uses 8/1 setting due to unsolved problems with
- * cmd_per_lun != 1 */
-
-#define ATARI_TT_CAN_QUEUE		16
-#define ATARI_TT_CMD_PER_LUN		8
-#define ATARI_TT_SG_TABLESIZE		SG_ALL
-
-#define ATARI_FALCON_CAN_QUEUE		8
-#define ATARI_FALCON_CMD_PER_LUN	1
-#define ATARI_FALCON_SG_TABLESIZE	SG_NONE
 
 #define	NCR5380_implementation_fields	/* none */
 

Index: linux/drivers/scsi/atari_scsi.c
===================================================================
@@ -64,15 +64,7 @@
 /**************************************************************************/
 
 
-
 #include <linux/module.h>
-
-/* For the Atari version, use only polled IO or REAL_DMA */
-#define	REAL_DMA
-/* Support tagged queuing? (on devices that are able to... :-) */
-#define	SUPPORT_TAGS
-#define	MAX_TAGS 32
-
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/blkdev.h>

@@ -92,9 +84,34 @@
 
 #include <scsi/scsi_host.h>
 
-#include "atari_scsi.h"
+/* Definitions for the core NCR5380 driver. */
+
+#define REAL_DMA
+#define SUPPORT_TAGS
+#define MAX_TAGS                        32
+
+#define NCR5380_implementation_fields   /* none */
+
+#define NCR5380_read(reg)               atari_scsi_reg_read(reg)
+#define NCR5380_write(reg, value)       atari_scsi_reg_write(reg, value)
+
+#define NCR5380_queue_command           atari_scsi_queue_command
+#define NCR5380_abort                   atari_scsi_abort
+#define NCR5380_show_info               atari_scsi_show_info
+#define NCR5380_info                    atari_scsi_info
+
+#define NCR5380_dma_read_setup(instance, data, count) \
+        atari_scsi_dma_setup(instance, data, count, 0)
+#define NCR5380_dma_write_setup(instance, data, count) \
+        atari_scsi_dma_setup(instance, data, count, 1)
+#define NCR5380_dma_residual(instance) \
+        atari_scsi_dma_residual(instance)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+        atari_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
+
 #include "NCR5380.h"
 
+
 #define	IS_A_TT()	ATARIHW_PRESENT(TT_SCSI)
 
 #define	SCSI_DMA_WRITE_P(elt,val)				\

Index: linux/drivers/scsi/atari_scsi.h
===================================================================
@@ -1,40 +0,0 @@
-/*
- * atari_scsi.h -- Header file for the Atari native SCSI driver
- *
- * Copyright 1994 Roman Hodek <[email protected]>
- *
- * (Loosely based on the work of Robert De Vries' team)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-
-#ifndef ATARI_SCSI_H
-#define ATARI_SCSI_H
-
-/* (I_HAVE_OVERRUNS stuff removed) */
-
-#ifndef ASM
-
-#define	NCR5380_implementation_fields	/* none */
-
-#define NCR5380_read(reg)		  atari_scsi_reg_read( reg )
-#define NCR5380_write(reg, value) atari_scsi_reg_write( reg, value )
-
-#define NCR5380_queue_command atari_scsi_queue_command
-#define NCR5380_abort atari_scsi_abort
-#define NCR5380_show_info atari_scsi_show_info
-#define NCR5380_info atari_scsi_info
-#define NCR5380_dma_read_setup(inst,d,c) atari_scsi_dma_setup (inst, d, c, 0)
-#define NCR5380_dma_write_setup(inst,d,c) atari_scsi_dma_setup (inst, d, c, 1)
-#define NCR5380_dma_residual(inst) atari_scsi_dma_residual( inst )
-#define	NCR5380_dma_xfer_len(i,cmd,phase) \
-	atari_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
-
-#endif /* ndef ASM */
-#endif /* ATARI_SCSI_H */
-
-

Index: linux/arch/m68k/sun3/config.c
===================================================================
@@ -16,6 +16,7 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/platform_device.h>
 
 #include <asm/oplib.h>
 #include <asm/setup.h>

@@ -27,6 +28,7 @@
 #include <asm/sun3mmu.h>
 #include <asm/rtc.h>
 #include <asm/machdep.h>
+#include <asm/machines.h>
 #include <asm/idprom.h>
 #include <asm/intersil.h>
 #include <asm/irq.h>

@@ -169,3 +171,61 @@ static void __init sun3_sched_init(irq_h
         intersil_clear();
 }
 
+#ifdef CONFIG_SUN3_SCSI
+
+static const struct resource sun3_scsi_vme_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = SUN3_VEC_VMESCSI0,
+		.end   = SUN3_VEC_VMESCSI0,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = 0xff200000,
+		.end   = 0xff200021,
+	}, {
+		.flags = IORESOURCE_IRQ,
+		.start = SUN3_VEC_VMESCSI1,
+		.end   = SUN3_VEC_VMESCSI1,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = 0xff204000,
+		.end   = 0xff204021,
+	},
+};
+
+/*
+ * Int: level 2 autovector
+ * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
+ */
+static const struct resource sun3_scsi_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = 2,
+		.end   = 2,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = 0x00140000,
+		.end   = 0x0014001f,
+	},
+};
+
+int __init sun3_platform_init(void)
+{
+	switch (idprom->id_machtype) {
+	case SM_SUN3 | SM_3_160:
+	case SM_SUN3 | SM_3_260:
+		platform_device_register_simple("sun3_scsi_vme", -1,
+			sun3_scsi_vme_rsrc, ARRAY_SIZE(sun3_scsi_vme_rsrc));
+		break;
+	case SM_SUN3 | SM_3_50:
+	case SM_SUN3 | SM_3_60:
+		platform_device_register_simple("sun3_scsi", -1,
+			sun3_scsi_rsrc, ARRAY_SIZE(sun3_scsi_rsrc));
+		break;
+	}
+	return 0;
+}
+
+arch_initcall(sun3_platform_init);
+
+#endif

452 lines not on this page · raw message

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -18,25 +18,8 @@
 #ifndef SUN3_SCSI_H
 #define SUN3_SCSI_H
 
-/*
- * Int: level 2 autovector
- * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
- */
-#define IRQ_SUN3_SCSI 2
-#define IOBASE_SUN3_SCSI 0x00140000
-
-#define IOBASE_SUN3_VMESCSI 0xff200000
-
 #define MAX_TAGS 32
 
-#include <scsi/scsicam.h>
-
-#ifdef SUN3_SCSI_VME
-#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
-#else
-#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
-#endif
-
 #define NCR5380_implementation_fields /* none */
 
 #define NCR5380_local_declare() \

Index: linux/arch/m68k/sun3/config.c
===================================================================
@@ -16,6 +16,7 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/platform_device.h>
 
 #include <asm/oplib.h>
 #include <asm/setup.h>

@@ -27,6 +28,7 @@
 #include <asm/sun3mmu.h>
 #include <asm/rtc.h>
 #include <asm/machdep.h>
+#include <asm/machines.h>
 #include <asm/idprom.h>
 #include <asm/intersil.h>
 #include <asm/irq.h>

@@ -169,3 +171,61 @@ static void __init sun3_sched_init(irq_h
         intersil_clear();
 }
 
+#ifdef CONFIG_SUN3_SCSI
+
+static const struct resource sun3_scsi_vme_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = SUN3_VEC_VMESCSI0,
+		.end   = SUN3_VEC_VMESCSI0,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = 0xff200000,
+		.end   = 0xff200021,
+	}, {
+		.flags = IORESOURCE_IRQ,
+		.start = SUN3_VEC_VMESCSI1,
+		.end   = SUN3_VEC_VMESCSI1,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = 0xff204000,
+		.end   = 0xff204021,
+	},
+};
+
+/*
+ * Int: level 2 autovector
+ * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
+ */
+static const struct resource sun3_scsi_rsrc[] __initconst = {
+	{
+		.flags = IORESOURCE_IRQ,
+		.start = 2,
+		.end   = 2,
+	}, {
+		.flags = IORESOURCE_MEM,
+		.start = 0x00140000,
+		.end   = 0x0014001f,
+	},
+};
+
+int __init sun3_platform_init(void)
+{
+	switch (idprom->id_machtype) {
+	case SM_SUN3 | SM_3_160:
+	case SM_SUN3 | SM_3_260:
+		platform_device_register_simple("sun3_scsi_vme", -1,
+			sun3_scsi_vme_rsrc, ARRAY_SIZE(sun3_scsi_vme_rsrc));
+		break;
+	case SM_SUN3 | SM_3_50:
+	case SM_SUN3 | SM_3_60:
+		platform_device_register_simple("sun3_scsi", -1,
+			sun3_scsi_rsrc, ARRAY_SIZE(sun3_scsi_rsrc));
+		break;
+	}
+	return 0;
+}
+
+arch_initcall(sun3_platform_init);
+
+#endif

452 lines not on this page · raw message

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -18,25 +18,8 @@
 #ifndef SUN3_SCSI_H
 #define SUN3_SCSI_H
 
-/*
- * Int: level 2 autovector
- * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
- */
-#define IRQ_SUN3_SCSI 2
-#define IOBASE_SUN3_SCSI 0x00140000
-
-#define IOBASE_SUN3_VMESCSI 0xff200000
-
 #define MAX_TAGS 32
 
-#include <scsi/scsicam.h>
-
-#ifdef SUN3_SCSI_VME
-#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
-#else
-#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
-#endif
-
 #define NCR5380_implementation_fields /* none */
 
 #define NCR5380_local_declare() \

Index: linux/drivers/scsi/sun3_scsi.c
===================================================================
@@ -33,18 +33,42 @@
 #include <asm/io.h>
 #include <asm/dvma.h>
 
-/* dma on! */
-#define REAL_DMA
-
 #include <scsi/scsi_host.h>
 #include "sun3_scsi.h"
-#include "NCR5380.h"
 
-extern int sun3_map_test(unsigned long, char *);
+/* Definitions for the core NCR5380 driver. */
 
-/*#define RESET_BOOT */
+#define REAL_DMA
+#define RESET_RUN_DONE
 /* #define SUPPORT_TAGS */
 
+/* #define MAX_TAGS                     32 */
+
+#define NCR5380_implementation_fields   /* none */
+
+#define NCR5380_read(reg)               sun3scsi_read(reg)
+#define NCR5380_write(reg, value)       sun3scsi_write(reg, value)
+
+#define NCR5380_queue_command           sun3scsi_queue_command
+#define NCR5380_bus_reset               sun3scsi_bus_reset
+#define NCR5380_abort                   sun3scsi_abort
+#define NCR5380_show_info               sun3scsi_show_info
+#define NCR5380_info                    sun3scsi_info
+
+#define NCR5380_dma_read_setup(instance, data, count) \
+        sun3scsi_dma_setup(data, count, 0)
+#define NCR5380_dma_write_setup(instance, data, count) \
+        sun3scsi_dma_setup(data, count, 1)
+#define NCR5380_dma_residual(instance) \
+        sun3scsi_dma_residual(instance)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+        sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
+
+#include "NCR5380.h"
+
+
+extern int sun3_map_test(unsigned long, char *);
+
 #ifdef SUN3_SCSI_VME
 #define ENABLE_IRQ()
 #else

@@ -65,9 +89,7 @@ module_param(setup_use_tagged_queuing, i
 static int setup_hostid = -1;
 module_param(setup_hostid, int, 0);
 
-static struct scsi_cmnd *sun3_dma_setup_done = NULL;
-
-#define	RESET_RUN_DONE
+/* #define RESET_BOOT */
 
 #define	AFTER_RESET_DELAY	(HZ/2)
 

@@ -80,6 +102,7 @@ static struct scsi_cmnd *sun3_dma_setup_
 /* minimum number of bytes to do dma on */
 #define SUN3_DMA_MINSIZE 128
 
+static struct scsi_cmnd *sun3_dma_setup_done;
 static unsigned char *sun3_scsi_regp;
 static volatile struct sun3_dma_regs *dregs;
 static struct sun3_udc_regs *udc_regs;

@@ -131,9 +154,6 @@ static inline void sun3_udc_write(unsign
 static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
 {
 	unsigned long end;
-
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
 	
 	/*
 	 * Do a SCSI reset to clean up the bus during initialization. No

@@ -210,7 +230,6 @@ static irqreturn_t scsi_sun3_intr(int ir
 void sun3_sun3_debug (void)
 {
 	unsigned long flags;
-	NCR5380_local_declare();
 
 	if (default_instance) {
 			local_irq_save(flags);

Index: linux/drivers/scsi/sun3_scsi.h
===================================================================
@@ -18,31 +18,6 @@
 #ifndef SUN3_SCSI_H
 #define SUN3_SCSI_H
 
-#define MAX_TAGS 32
-
-#define NCR5380_implementation_fields /* none */
-
-#define NCR5380_local_declare() \
-        struct Scsi_Host *_instance
-
-#define NCR5380_setup(instance) \
-        _instance = instance
-
-#define NCR5380_read(reg) sun3scsi_read(reg)
-#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
-
-#define NCR5380_queue_command sun3scsi_queue_command
-#define NCR5380_bus_reset sun3scsi_bus_reset
-#define NCR5380_abort sun3scsi_abort
-#define NCR5380_show_info sun3scsi_show_info
-#define NCR5380_info sun3scsi_info
-#define NCR5380_dma_xfer_len(i, cmd, phase) \
-        sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
-
-#define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
-#define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
-#define NCR5380_dma_residual sun3scsi_dma_residual
-
 /* additional registers - mainly DMA control regs */
 /* these start at regbase + 8 -- directly after the NCR regs */
 struct sun3_dma_regs {